Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
CRACKER LICENSE
Cracker License request is applied by the citizen through the
request can be accessed by the
are provided below.
Category Type B
Documents Required 1. Application
2. Identity Proof
3. Address Proof
4. Verification Report from Police
5. No Objection from Fire Service Department
6. No Objection from local body
7. Particulars of Previous license if any
8. Photo
SLA 30 Working days
Note: The asterisk (*) denotes mandatory requirement of documents.
Note: - This service is 4 Step Process. The Process flow as mentioned below.
1. In case of Fresh Application Routed as Below
Procedure for Processing the
Step1:
DRO End:
1) Select “Cracker License”
figure 1.
CRACKER LICENSE - USER MANUAL- DEPARTMENT
request is applied by the citizen through the Meeseva centers
request can be accessed by the Department and processed. The processing steps and screens
1. Application*
2. Identity Proof *
3. Address Proof *
4. Verification Report from Police*
5. No Objection from Fire Service Department*
Objection from local body*
7. Particulars of Previous license if any*
8. Photo*
Working days
The asterisk (*) denotes mandatory requirement of documents. # Indicates Optional
Step Process. The Process flow as mentioned below.
In case of Fresh Application Routed as Below
Request at Department End: -
Cracker License” service from Application Processing. It has been
DEPARTMENT END
Meeseva centers. This
and processed. The processing steps and screens
Indicates Optional.
It has been depicted in
Figure 1: Cracker License
2) After selection of “Cracker License
been depicted in figure 2.
Figure 2: Processing window in
3) Select From date and To date
Note: - Here, to date must be prior to Current date.
Cracker License Process link under Application Processing
Cracker License” link, processing window will be displayed.
Processing window in Cracker License request screen
o date by using calendar controls as depicted in figure 3.
to date must be prior to Current date.
Process link under Application Processing
will be displayed. It has
request screen
depicted in figure 3.
Figure 3: S
4) Select “Service type (either Cracker License for Dewali
Explosive Material)” from Application type drop d
NOTE: - Here I am selecting Application Type as “
Figure 4: Selection of
5) Select “Request Status (either All/Not Viewed/Open, Forwarded to RDO. Forwarded to
MRO etc...)” from request status drop d
NOTE: - Here, At First the Request is in “Not Viewed” Status. Her
viewed” request.
Figure 3: Selection of dates in processing window
(either Cracker License for Dewali \ Grant of Lease for Storage of
Explosive Material)” from Application type drop down list as depicted in figure 4
Here I am selecting Application Type as “Cracker License for Dewali
Figure 4: Selection of Service Type in Processing window
Select “Request Status (either All/Not Viewed/Open, Forwarded to RDO. Forwarded to
MRO etc...)” from request status drop down list as depicted in figure 5.
Here, At First the Request is in “Not Viewed” Status. Here I am selecting “Not
Grant of Lease for Storage of
own list as depicted in figure 4.
”
Select “Request Status (either All/Not Viewed/Open, Forwarded to RDO. Forwarded to
e I am selecting “Not
Figure 5: Selection of
6) Click “Get Details” button
Figure 6: Get Details button in Processing window
7) All “Not Viewed” Requests are displayed
as depicted in figure 7.
Figure 7: Request selection in
8) After selection of the request,
8.
: Selection of request status in processing window
utton to display requests as depicted in figure 6.
: Get Details button in Processing window
Requests are displayed. Select the Request which need
: Request selection in processing window
equest, request details page will be displayed as depicted in figure
need to be processed
depicted in figure
Figure 8: Request details page of
9) DRO Select Forward to RDO, Enter his/her
depicted in figure 9.
: Request details page of Cracker License
DRO Select Forward to RDO, Enter his/her Remarks and Click Forward to RDO Button
ick Forward to RDO Button
Figure 9: Remarks
Note: - Forwarded to RDO Message displayed. Now Request is at RDO End.
RDO End:
1) Select “Cracker License ” service from Application Processing
figure 1.
Figure 1: Cracker License
2) After selection of “Cracker License
depicted in figure 2.
Remarks in Cracker License request details Page
Forwarded to RDO Message displayed. Now Request is at RDO End.
” service from Application Processing. It has been depicted in
Cracker License Process link under Application Processing
Cracker License ” link, processing window will be displayed.
It has been depicted in
Process link under Application Processing
” link, processing window will be displayed. It has been
Figure 2: Processing window in
3) Select From date and To date
Note: - Here, to date must be prior to Current date.
Figure 3: Selection of dates in processing window
4) Select “Service type (either Cracker License for Dewali
Explosive Material)” from Application type drop down list as depicted in figure 4.
NOTE: - Here I am selecting Application Type as “
Figure 4: Service Type Sel
5) Select “Request Status (either All/Not Viewed/Open, Forwarded to RDO. Forwarded to
MRO etc...)” from request status drop d
NOTE: - Here, At First the Request is in “
“Forwarded by DRO” request.
Figure 2: Processing window in Cracker License request screen
From date and To date by using calendar controls as depicted in figure 3.
Here, to date must be prior to Current date.
Figure 3: Selection of dates in processing window
(either Cracker License for Dewali \ Grant of Lease for Storage of
Explosive Material)” from Application type drop down list as depicted in figure 4.
Here I am selecting Application Type as “Cracker License for Dewali
: Service Type Selection in processing window
Select “Request Status (either All/Not Viewed/Open, Forwarded to RDO. Forwarded to
MRO etc...)” from request status drop down list as depicted in figure 5.
Here, At First the Request is in “Forwarded by DRO” Status. Here I am selecting
request screen
depicted in figure 3.
Grant of Lease for Storage of
Explosive Material)” from Application type drop down list as depicted in figure 4.
”
Select “Request Status (either All/Not Viewed/Open, Forwarded to RDO. Forwarded to
Here I am selecting
Figure 5: Selection of Status in Processing window
6) Click “Get Details” button to display requests
Figure 6: Get Details button in Processing window
7) All “Forwarded by DRO” Requests are displayed
processed as depicted in figure 7
Figure 7: Request selection in processing window
: Selection of Status in Processing window
” button to display requests as depicted in figure 6.
: Get Details button in Processing window
Requests are displayed. Select the Request which need to be
depicted in figure 7.
: Request selection in processing window
Select the Request which need to be
8) After selection of the request,
8.
Figure 8: Request details page of
9) RDO Downloads Verify the Documents
After selection of the request, Request details page will be displayed as depicted in figure
: Request details page of Cracker License
Downloads Verify the Documents as depicted in figure 9.
depicted in figure
Figure 9: Documents Verification in
10) RDO Select Forward to MRO, Enter his/her
depicted in figure 10.
Figure 10: Remarks in Cracker License request details Page
Note: - Forwarded to MRO Message displayed. Now Request is at MRO End.
MRO End:
1) Select “Cracker License ” service from Application Processing
figure 1.
Figure 1: Cracker License Process link under Application Processing
: Documents Verification in Cracker License Request Screen
O, Enter his/her Remarks and Click Forward to MR
: Remarks in Cracker License request details Page
Forwarded to MRO Message displayed. Now Request is at MRO End.
” service from Application Processing. It has been depicted
Figure 1: Cracker License Process link under Application Processing
Request Screen
Remarks and Click Forward to MRO Button
It has been depicted in
Figure 1: Cracker License Process link under Application Processing
2) After selection of “Cracker License
depicted in figure 2.
Figure 2: Processing window in Cracker License
3) Select From date and To date
Note: - Here, to date must be prior to Current date.
Figure 3: Selection of dates in processing window
4) Select “Service type (either Cracker License for Dewali
Explosive Material)” from Application type drop down list as depicted in figure 4.
NOTE: - Here I am selecting Application Type as “
Cracker License ” link, processing window will be displayed.
Figure 2: Processing window in Cracker License request screen
From date and To date by using calendar controls as depicted in figure 3.
Here, to date must be prior to Current date.
Figure 3: Selection of dates in processing window
(either Cracker License for Dewali \ Grant of Lease for Storage of
Explosive Material)” from Application type drop down list as depicted in figure 4.
Here I am selecting Application Type as “Cracker License for Dewali
” link, processing window will be displayed. It has been
request screen
depicted in figure 3.
Grant of Lease for Storage of
Explosive Material)” from Application type drop down list as depicted in figure 4.
”
Figure 4: Service Type Sel
5) Select “Request Status (either A
MRO etc...)” from request status drop d
NOTE: - Here, At First the Request is in “
“Forwarded by RDO” request.
Figure 5: Selection of Status in Processing window
6) Click “Get Details” button to display requests
: Service Type Selection in processing window
Select “Request Status (either All/Not Viewed/Open, Forwarded by RDO. Forwarded to
MRO etc...)” from request status drop down list as depicted in figure 5.
Here, At First the Request is in “Forwarded by RDO” Status. Here I am selecting
: Selection of Status in Processing window
” button to display requests as depicted in figure 6.
RDO. Forwarded to
Here I am selecting
Figure 6: Get Details button in Processing window
7) All “Forwarded by DRO” Requests are displayed
processed as depicted in figure 7
Figure 7: Request selection in processing window
8) After selection of the request,
8.
: Get Details button in Processing window
Requests are displayed. Select the Request which need to be
depicted in figure 7.
: Request selection in processing window
After selection of the request, Request details page will be displayed as depicted in
Select the Request which need to be
depicted in figure
Figure 8: Request details page of Cracker License
: Request details page of Cracker License
9) MRO Downloads Verify the Documents
Figure 9: Documents Verification in Cracker License Request Screen
Note: - After downloading all Verification/Proceeding documents, MRI &
from the MRO for field level enquiry. After enquiry, the MRI & VRO submitted their report to
theTahasildar.
Note: - If MRO wants any additional details then,
SMS to Applicant.
10) Upload Enquiry Report at “Process Upload Documents
Figure 10: Upload
11) MRO Selects Forward to RDO Radio button, Enter his/her Remarks and Click Forward to
MRO Button depicted in figure 11
Figure 11: Remarks in Cracker License request details Page
Note: - Forwarded to RDO Message displayed. Now Request is at RDO End.
RDO End:-
1) Now RDO login into Meese with his/her credentials and select the request same as above.
2) Now Request is in Forwarded by M
3) RDO Download and Verify Attached Documents and M
figure 1.
Downloads Verify the Documents as depicted in figure 9.
: Documents Verification in Cracker License Request Screen
After downloading all Verification/Proceeding documents, MRI & VRO collect documents
for field level enquiry. After enquiry, the MRI & VRO submitted their report to
wants any additional details then, he/she sends SMS to Citizen by using Send
Process Upload Documents” as depicted in figure 10.
Upload in Cracker License request details Page
MRO Selects Forward to RDO Radio button, Enter his/her Remarks and Click Forward to
O Button depicted in figure 11.
: Remarks in Cracker License request details Page
Forwarded to RDO Message displayed. Now Request is at RDO End.
Now RDO login into Meese with his/her credentials and select the request same as above.
Forwarded by MRO Status
RDO Download and Verify Attached Documents and MRO Proceedings as depicted in
: Documents Verification in Cracker License Request Screen
VRO collect documents
for field level enquiry. After enquiry, the MRI & VRO submitted their report to
sends SMS to Citizen by using Send
as depicted in figure 10.
MRO Selects Forward to RDO Radio button, Enter his/her Remarks and Click Forward to
Now RDO login into Meese with his/her credentials and select the request same as above.
RO Proceedings as depicted in
Figure 1: Documents in Cracker License Request details Page
4) RDO Upload Enquiry Report based on MRO Report as
Figure 2: Uploads in Cracker License Request details Page
5) RDO Selects Forward to DRO Radio button, Enter his/her Remarks and Click Forward to
DRO Button depicted in figure 3
Figure 3: Remarks in Cracker License request details Page
Note: - Forwarded to DRO Message displayed. Now Request is at DRO End.
DRO End:
1) Now DRO login into Meese
above.
2) Now Request is in Forwarded by
3) DRO Download and Verify Attached
figure 1.
Figure 1: Documents in Cracker License Request details Page
RDO Upload Enquiry Report based on MRO Report as depicted in figure 2.
2: Uploads in Cracker License Request details Page
RDO Selects Forward to DRO Radio button, Enter his/her Remarks and Click Forward to
O Button depicted in figure 3.
: Remarks in Cracker License request details Page
Forwarded to DRO Message displayed. Now Request is at DRO End.
Meese with his/her credentials and select the request same as
Forwarded by RDO Status
Verify Attached Documents and RDO Proceedings as depicted in
Figure 1: Documents in Cracker License Request details Page
.
RDO Selects Forward to DRO Radio button, Enter his/her Remarks and Click Forward to
with his/her credentials and select the request same as
O Proceedings as depicted in
Figure 1: Documents in
4) DRO Upload Proceedings
Forward to Collector button as depicted in fig
Figure 2: Remarks in
Note: - Forwarded to Collector
COLLECTOR End:
1) Select “Cracker License” service from Application Processing
figure 1.
Documents in Cracker License Request details Page
Upload Proceedings, Enter Remarks based on Enquiry Report and
button as depicted in figure 2.
: Remarks in Cracker License request details Page
Collector Message displayed. Now Request is at Collector
” service from Application Processing. It has been depicted in
Request details Page
and Click
Collector End.
It has been depicted in
Figure 1: Cracker License
2) After selection of “Cracker License
been depicted in figure 2.
Figure 2: Processing window in
3) Select From date and To date
Note: - Here, to date must be prior to Current date.
Figure 3: Selection of dates in processing window
4) Select “Application Type
of Explosive Material)” from Application type drop d
Cracker License Process link under Application Processing
Cracker License” link, processing window will be displayed.
Figure 2: Processing window in Cracker License request screen
o date by using calendar controls as depicted in figure 3.
Here, to date must be prior to Current date.
Figure 3: Selection of dates in processing window
Application Type (either Cracker License for Dewali \ Grant of Lease for
)” from Application type drop down list as depicted in figure 4
Process link under Application Processing
” link, processing window will be displayed. It has
request screen
depicted in figure 3.
Grant of Lease for Storage
own list as depicted in figure 4.
NOTE: - Here I am selecting Application Type as
Figure 4: Selection of
5) Select “Request Status (either All/ Forwarded by DRO, Approve, Reject etc...)” from
request status drop down list as depicted in figure 5
NOTE: - Here, At First the Request is in “
“Forwarded by DRO” request.
Figure 5: Selection of request status in processing window
6) Click “Get Details” button to display requests
m selecting Application Type as “Cracker License for Dewali
Figure 4: Selection of Service Type in Processing window
(either All/ Forwarded by DRO, Approve, Reject etc...)” from
own list as depicted in figure 5.
Here, At First the Request is in “Forwarded by DRO” Status. Here I am selecting
Figure 5: Selection of request status in processing window
” button to display requests as depicted in figure 6.
”
(either All/ Forwarded by DRO, Approve, Reject etc...)” from
” Status. Here I am selecting
Figure 6: Get Details button in Processing window
7) All “Forwarded by DRO” Requests are displayed
processed as depicted in figure 7.
Figure 7: Request selection in processing window
8) After selection of the request, request details page will be displayed
8.
Figure 6: Get Details button in Processing window
” Requests are displayed. Select the Request which need to be
depicted in figure 7.
Figure 7: Request selection in processing window
After selection of the request, request details page will be displayed as depicted in figure
which need to be
depicted in figure
Figure 8: Request details page of
: Request details page of Cracker License
9) Collector Download and verify
Approve or Reject as depicted in
Note: - Based on Collector action
is generated.
Figure 9: Action Taken
10) If Collector wants to Approve the Request then he/ she
depicted in figure 10.
Figure 10: Action Taken in
Collector Download and verify DRO , RDO, MRO Reports and Take Action either
Approve or Reject as depicted in figure 9.
action (either Approve/Reject), status (either Approved or
Action Taken in Cracker License request details Page
to Approve the Request then he/ she selects Approved button as
: Action Taken in Cracker License request details Page
and Take Action either
Approved or Rejected)
request details Page
selects Approved button as
request details Page
11) Now Collector Upload Document,
figure 11.
Figure 11: Remarks in
12) After clicking on “Sign” button, Certificate window will be di
12.
13) Click “OK” button on Certificate as depicted in figure 13
Now Collector Upload Document, Enter Remarks and Click “Sign” button as depicted in
: Remarks in Cracker License request details Page
” button, Certificate window will be displayed as depicted
Figure 12: Certificate window
ificate as depicted in figure 13.
” button as depicted in
splayed as depicted in figure
Figure 13:
14) After clicking on “OK” button, private exchange key popup will generated
following figure.
15) Now clicking on “OK” button as depicted in following figure.
16) After clicking on “OK” button “
following figure.
: “OK” button selection in Certificate window
” button, private exchange key popup will generated
” button as depicted in following figure.
” button “Cracker License Certificate” is generated as
” button, private exchange key popup will generated as depicted in
as depicted in
Note: - Now the request is in Approved status.
Now the request is in Approved status.
Note: - After Approved/Rejected,
Approved/ Rejected.
17) Once the request is approved by dispatched through courier from franchisee to the citizen’s address if Delivery Type is Speed Post Local/Non Local.
18) If Delivery Type Is Manual, then citizen collect the franchisee where he/she applied
Note: Grant of Lease for Storage of Explosive Material
After Approved/Rejected, Customer Received Message. Like you are Request is
Once the request is approved by Collector , then Cracker License Certificatedispatched through courier from franchisee to the citizen’s address if Delivery Type is Speed Post Local/Non Local. If Delivery Type Is Manual, then citizen collect the Cracker License franchisee where he/she applied.
t of Lease for Storage of Explosive Material Process is same like as above.
Customer Received Message. Like you are Request is
Certificate will be dispatched through courier from franchisee to the citizen’s address if Delivery Type is
Certificate from
Process is same like as above.