Upload
shawes70
View
125
Download
5
Embed Size (px)
Citation preview
800-839-8823 www.creform.com
Creform metal Joint Components – 28mm
Individual H- components are combined with M6-25 bolts and M6-B nuts (see page G-3) to form HJ- joint assemblies for ø28 pipe. Dimensions are in millimeters.
See Technical Section H for metal joint data.
H-7H-6
Surface Treatment: Black Coating. Used to form: HJ-7, HJ-12. Note: M6-25 bolts and M6-B nuts required. See page G-3.
Surface Treatment: Black Coating. Used to form: HJ-6. Note: M6-25 bolt and M6-B nut required. See page G-3.
H-1BH-1
ø4.2
3335
30
65
ø4.2
33 3530
65
Surface Treatment: Black Coating. Used to form: HJ-1, MF1-1. Note: M6-25 bolt and M6-B nut required. See page G-3. ø4.2 hole available.
Surface Treatment: Black Coating. Used to form: HJ-1BNote: M6-25 bolt and M6-B nut required. See page G-3.ø4.2 hole available.
H-3H-2
Surface Treatment: Black Coating. Used to form: HJ-2, HJ-3, HJ-5. Note: M6-25 bolts and M6-B nuts required. See page G-3.
Surface Treatment: Black Coating. Used to form: HJ-2. Note: M6-25 bolts and M6-B nuts required. See page G-3.
H-5H-4
Surface Treatment: Black Coating. Used to form: HJ-3, HJ-4, MF1-2. Note: M6-25 bolts and M6-B nuts required. See page G-3.
Surface Treatment: Black Coating. Used to form: HJ-7. Note: M6-25 bolt and M6-B nut required. See page G-3.
C-1
35
3065
3335
3065
33
35
30
65
33
65 35.533
30
33
40
35
se
Ctio
n
C
800-839-8823 www.creform.com
Creform metal Joint Components – 28mm
F1-2F1-1
Surface Treatment: Black Coating. Used to form: MF1-1. Note: M6-25 bolt and M6-B nut required. See page G-3.
Surface Treatment: Black Coating. Used to form: MF1-2. Note: M6-25 bolts and M6-B nuts required. See page G-3.
H-9H-7A
Surface Treatment: Black Coating. Used to form: HJ-6A. Note: M6-25 bolt and M6-B nut required. See page G-3.
Surface Treatment: Black Coating. Used to form: HJ-8. Note: M6-25 bolt and M6-B nut required. See page G-3. Requires J-140ASA and J-140PEM. See page D-11.
H-12H-10
Surface Treatment: Black Coating. Used to form: HJ-9. Note: M6-25 bolt and M6-B nut required. See page G-3.
Surface Treatment: Black Coating. Used to form: HJ-10. Note: M6-25 bolt and M6-B nut required. See page G-3.Requires J-140PEM. See page D-11.
H-14H-13
Surface Treatment: Black Coating. Used to form: HJ-11. Note: M6-25 bolt and M6-B nut required. See page G-3.
Surface Treatment: Black Coating. Used to form: HJ-12. Note: M6-25 bolts and M6-B nuts required. See page G-3.
C-2
Individual H- components are combined with M6-25 bolts and M6-B nuts (see page G-3) to form HJ- joint assemblies for ø28 pipe. Some assemblies require J-140ASA & J-140PEM. Dimensions are in millimeters.
See Technical Section H for metal joint data.
35
40
37
45
67.5
3035
65
34.5
36
3035
65
33
34.5
71
33
3035
39
653365
30
3539 65
30
35
se
Ctio
n
C
800-839-8823 www.creform.com
Creform eSD metal Joint ComponentS – 28mm
Individual H-NI components are combined with M6-25 bolts and M6-B nuts (see page G-3) to form HJ-NI joint assemblies for ø28 pipe. Most commonly used to assemble anti-static Creform structures.
Dimensions are in millimeters. See Technical Section H for metal joint data.
H-7NIH-6NI
Surface Treatment: Conductive Plating. Used to form: HJ-7NI or HJ-12NI. Note: M6-25 bolts and M6-B nuts required. See page G-3.
Surface Treatment: Conductive Plating. Used to form: HJ-6NI. Note: M6-25 bolt and M6-B nut required. See page G-3.
H-1BNIH-1NI
ø4.2
3335
30
65
ø4.2
33 3530
65
Surface Treatment: Conductive Plating. Used to form: HJ-1NI & MF1-1NI. Note: M6-25 bolt and M6-B nut required. See page G-3.ø4.2 hole available.
Surface Treatment: Conductive Plating. Used to form: HJ-1BNI. Note: M6-25 bolt and M6-B nut required. See page G-3.ø4.2 hole available.
H-3NIH-2NI
Surface Treatment: Conductive Plating. Used to form: HJ-2NI, HJ-3NI, HJ-5NI. Note: M6-25 bolts and M6-B nuts required. See page G-3.
Surface Treatment: Conductive Plating. Used to form: HJ-2NI. Note: M6-25 bolts and M6-B nuts required. See page G-3.
H-5NIH-4NI
Surface Treatment: Conductive Plating. Used to form: HJ-3NI, HJ-4NI. Note: M6-25 bolts and M6-B nuts required. See page G-3.
Surface Treatment: Conductive Plating. Used to form: HJ-7NI. Note: M6-25 bolt and M6-B nut required. See page G-3.
C-3ESD anti static
35
3065
3335
3065
33
35
30
65
33
65 35.533
30
33
40
35
Se
Ctio
n
C
800-839-8823 www.creform.com
Creform eSD metal Joint ComponentS & Joint SetS – 28mm
F1-1NI
Surface Treatment: Conductive Plating. Used to form: MF1-1NI.Used with: Conductive flat pipe, HFGA-4000. Note: M6-25 bolt and M6-B nut required. See page G-3.
HJ-13NI
Surface Treatment: Conductive Plating. Components: H-15NI(1), H-16NI(1), M6-25 & M6-B(1 ea). Used With: ø28 pipe to form 45º angle. Typical Applications: Structure reinforcement. Note: Sold only as a joint set.
H-9NIH-7ANI
Surface Treatment: Conductive Plating. Used to form: HJ-6ANI. Note: M6-25 bolt and M6-B nut required. See page G-3.
Surface Treatment: Conductive Plating. Used to form: HJ-8NI.Note: M6-25 bolt and M6-B nut required. See page G-3. Requires J-140ASA and J-140PEM. See page D-11.
H-12NIH-10NI
Surface Treatment: Conductive Plating.Used to form: HJ-9NI. Note: M6-25 bolts and M6-B nuts required. See page G-3.
Surface Treatment: Conductive Plating.Used to form: HJ-10NI. Note: M6-25 bolt and M6-B nut required. See page G-3. Requires J-140PEM. See page D-11.
H-14NIH-13NI
Surface Treatment: Conductive Plating.Used to form: HJ-11NI. Note: M6-25 bolt and M6-B nut required. See page G-3.
Surface Treatment: Conductive Plating.Used to form: HJ-12NI. Note: M6-25 bolts and M6-B nuts required. See page G-3.
C-4ESD anti static
35
40
37
45
36
3035
65
33
34.5
71
33
67.5
3035
65
34.5
Se
Ctio
n
C
45º30 40
3325
Individual H-NI components are combined with M6-25 bolts and M6-B nuts (see page G-3) to form HJ-NI joint assemblies for ø28 pipe. Most commonly used to assemble anti-static Creform structures.
Dimensions are in millimeters. See Technical Section H for metal joint data.
3035
39
6533
800-839-8823 www.creform.com
Creform metal Joint sets – 28mm
Complete joint assemblies for connecting ø28 pipe (H-, HC-, HK-, HF-, etc.). Attachment with M6-25 bolts and M6-B nuts unless otherwise noted. Dimensions are in millimeters.
See Technical Section H for metal joint data.
HJ-6AHJ-6
Surface Treatment: Black Coating. Components: H-7(2), M6-25 & M6-B(1 ea). Used With: ø28 pipe to form cross-pipe intersection.Typical Applications: All structures, cart reinforcement.
Surface Treatment: Black Coating. Components: H-7A(2), M6-25 & M6-B(1 ea). Used With: ø28 HK-, HKL-, HF-, HPA-, HPB pipe. Typical Applications: Guide, flow rack loading area.
HJ-1BHJ-1
Surface Treatment: Black Coating. Components: H-1(2), M6-25 & M6-B(1 ea). Used With: Two ø28 pipes to form T-intersection or corner. Typical Applications: All structures.Note: ø4.2 hole available.
Surface Treatment: Black Coating. Components: H-1B(2), M6-25 & M6-B(1 ea). Used With: ø28 HK-, HKL-, HF-, HPA-, HPB- pipes. Typical Applications: Guide, flow rack loading area. Note: ø4.2 hole available.
HJ-3HJ-2
Surface Treatment: Black Coating. Components: H-2(1), H-3(1), M6-25 & M6-B(2 ea). Used With: ø28 pipe to form corner and intersection.Typical Applications: All structures.
Surface Treatment: Black Coating. Components: H-2(2), H-4(1), M6-25 & M6-B(3 ea). Used With: ø28 pipe to form 4-pipe intersection.Typical Applications: Intermediate structural unions.
HJ-5HJ-4
Surface Treatment: Black Coating. Components: H-4(2), M6-25 & M6-B(2 ea). Used With: ø28 pipe to form 3-pipe intersection.Typical Applications: Intermediate structural unions.
Surface Treatment: Black Coating. Components: H-2(4), M6-25 & M6-B(4 ea). Used With: ø28 pipe to form 5-pipe intersection.Typical Applications: Intermediate structural unions.
C-5
3530
33 65
ø4.2 ø4.265
3530
33
65
35
30 3065
65
35
65
30
65
65
3565
3065
35
65
40
35
40
35
se
Ctio
n
C
HJ-8HJ-7
800-839-8823 www.creform.com
Creform metal Joint SetS – 28mm
HJ-13
Surface Treatment: Black Coating. Components: H-15(1), H-16(1), M6-25 & M6-B(1 ea). Used With: Two ø28 pipes to form 45º angle. Typical Applications: Structure reinforcement.
HJ-10HJ-9
Surface Treatment: Black Coating. Components: H-10(2), M6-25 & M6-B(1 ea). Used With: ø28 H-, HPA- & HPB pipe to connect doubled-pipe to a single pipe.Typical Applications: All structures.
Surface Treatment: Black Coating. Components: H-12(2), M6-25 & M6-B(1 ea), J-140PEM(1). Used With: ø28 pipe for rotating or sliding members. Typical Applications: Folding tables, latching shelf cart.
HJ-12HJ-11
Surface Treatment: Black Coating. Components: H-13(2), M6-25 & M6-B(1 ea). Used With: ø28 H- pipe to form doubled-pipe member. Typical Applications: All structures.
Surface Treatment: Black Coating. Components: H-6(4), H-14(2), M6-25 & M6-B(4 ea). Used With: ø28 pipe to form dual angle intersections. Typical Applications: Structure reinforcement.
C-6
Complete joint assemblies for connecting ø28 pipe (H-, HC-, HK-, HF-, etc.). Attachment with M6-25 bolts and M6-B nuts unless otherwise noted. Dimensions are in millimeters.
See Technical Section H for metal joint data.
37
45
34.5
33
33
33
30
71
3033
35.533
3033
6567.5
30
35
34.5
3630
35
65
Se
Ctio
n
C Surface Treatment: Black Coating. Components: H-5(2), H-6(2), M6-25 & M6-B(2 ea). Used With: Two ø28 pipe to form angle intersection.Typical Applications: Structure reinforcement.
Surface Treatment: Black Coating. Components: H-9(2), M6-25 & M6-B(1 ea), J-140ASA(1), J-140PEM(1). Used With: ø28 pipe for rotating or sliding pipes.Typical Applications: Folding tables, door hinges. Note: Attach J-140ASA with adhesive or screw.
45º30 40
3325
800-839-8823 www.creform.com
Creformmetal Joint SetS – 28mm
Complete joint assemblies for connecting ø28 pipe (H- and HF-). Uses M6-25 bolts and M6-B nuts unless otherwise noted. Dimensions are in millimeters.
See Technical Section H for metal joint data.
C-7
MF1-2MF1-1
Surface Treatment: Black Coating. Components: F1-1(1), H-1(1), M6-25 & M6-B(1 ea). Used With: One ø28 pipe & one HF- pipe for corner or T-intersection. Typical Applications: Shelf of cart, display area of workstation.
Surface Treatment: Black Coating. Components: F1-2(1), H-4(1), M6-25 & M6-B(2 ea). Used With: One ø28 pipe & two HF- pipes for corner or and intersection. Typical Applications: Intermediate junctions of two flat pipes.
33
30
3565 30
6535
65
Se
Ctio
n
C
Creformmetal Joint SetS – 32mm
Complete joint assemblies for connecting ø32 pipe (HB-). Attachment with M6-30 bolts and M6-B nuts unless otherwise noted. Dimensions are in millimeters.
See Technical Section H for metal joint data.
SJ-4SJ-3
Surface Treatment: Black Coating. Components: S-2(2), S-4(1), M6-30 & M6-B(3 ea). Used With: Four ø32 pipes to form intersection. Typical Applications: Workstations, shelves, etc.
Surface Treatment: Black Coating. Components: S-4(2), M6-30 & M6-B(2 ea). Used With: Three ø32 pipes for corner and intersection. Typical Applications: Intermediate structural unions.
SJ-2SJ-1
Surface Treatment: Black Coating. Components: S-1(2), M6-30 & M6-B(1 ea). Used With: Two ø32 pipes for corner or T-intersection. Typical Applications: Workstations, shelves, etc.
Surface Treatment: Black Coating. Components: S-2(1), S-3(1), M6-30 & M6-B(2 ea). Used With: Three ø32 pipes for corner and intersection. Typical Applications: Workstations, shelves, etc.
37
30
4070
3070
40
40
70
70
3070
40
70 30
70
SJ-10SJ-9
Surface Treatment: Black Coating. Components: S-10(1), S-11(1), M6-30 & M6-B(1 ea). Used With: Two ø32 pipes to form 60° angle. Typical Applications: Structure reinforcement.
Surface Treatment: Black Coating. Components: S-12(1), S-13(1), M6-30 & M6-B(1 ea). Used With: Two ø32 pipes to form 30° angle. Typical Applications: Structure reinforcement.
SJ-8SJ-7
Surface Treatment: Black Coating. Components: S-5(2), S-6(2), M6-30 & M6-B(2 ea). Used With: ø32 pipe to form optional angle intersection. Typical Applications: Structure reinforcement.
Surface Treatment: Black Coating. Components: S-8(1), S-9(1), M6-30 & M6-B(1 ea). Used With: Two ø32 pipes to form 45° angle. Typical Applications: Structure reinforcement.
800-839-8823 www.creform.com
Creformmetal Joint SetS – 32mm
SJ-6SJ-5
Surface Treatment: Black Coating. Components: S-2(4), M6-30 & M6-B(4 ea). Used With: ø32 pipe to form 5-pipe intersection. Typical Applications: Workstations, shelves, etc.
Surface Treatment: Black Coating. Components: S-7(2), M6-30 & M6-B(1 ea). Used With: ø32 pipe to form 2-pipe cross-intersection. Typical Applications: Workstations, shelves, etc.
C-8
Complete joint assemblies for connecting ø32 pipe (HB-). Attachment with M6-30 bolts and M6-B nuts unless otherwise noted. Dimensions are in millimeters.
See Technical Section H for metal joint data.
7040
70 30
70 45
35
42
30
37
36
4030
45º
2537
4030
30º
3237
4030
60º
3037
Se
Ctio
n
C
800-839-8823 www.creform.com
CreformPIPe – 42mm
ø42 pipe is used for frame components of heavy-duty structures connected by metal joints, accessories and casters. Dimensions are in millimeters. See Technical Section page C-16, for pipe strength data.
When ordering, specify color code, see page B-1.
Standard Pipe Spiral Pipe
ESD Pipe
HLC-4000HL4-4000
Colors: Gray, Blue, Ivory. Used With: Creform heavy-duty structures. Standard Lengths: HL4-4000 = 4m. Typical Applications: Workstations, flow racks, carts.
Colors: Yellow w/Black Spiral. Used With: Creform heavy-duty structures. Standard Lengths: HLC-4000 = 4m. Typical Applications: Safety fences, railings, enclosures.
HLGA-4000
Colors: White Gray. Used With: Creform heavy-duty structures. Standard Lengths: HLGA-4000 = 4m. Typical Applications: ESD structures.Note: Not compatible with Creform adhesive.
9
Se
CTIo
N
C
ø42 Length(mm) ø42
Length(mm)
ø42 Length(mm)
ESD anti static
• Pipe strength is approx. 2.5x standard 28mm pipe
42mm pipe and joints provide an extended range of loading for structures. For example, the structural spans within this workstation are made longer with less bracing and support. Creform’s broad range of 42/28mm metal joints allow the use of standard 28mm pipe to be integrated with the 42mm pipe where practical.
LJ-12ALJ-7A
Surface Treatment: Black Coating. Components: L-5A(2), L-6A(2), M8-40B(1 ea), M8-30B(1 ea). Used With: ø42 HL4, HLC pipe. Typical Applications: General Creform heavy duty structures.
Surface Treatment: Black Coating. Components: L-14A(2), L-6A(2), M8-40B(2 ea), M8-30B(2 ea). Used With: ø42 HL4, HLC pipe. Typical Applications: General Creform heavy duty structures.
LJ-2A
Surface Treatment: Black Coating. Components: L-1A(2), M8-40B(1 ea). Used With: ø42 HL4, HLC pipe. Typical Applications: General Creform heavy duty structures.
Surface Treatment: Black Coating. Components: L-2A(1), L-3A(1), M8-40B(2 ea). Used With: ø42 HL4, HLC pipe. Typical Applications: General Creform heavy duty structures.
LJ-4A
Surface Treatment: Black Coating. Components: L-2A(2), L-4A(1),M8-40B(3 ea). Used With: ø42 HL4, HLC pipe. Typical Applications: General Creform heavy duty structures.
Surface Treatment: Black Coating. Components: L-4A(2), M8-40B(2 ea). Used With: ø42 HL4, HLC pipe. Typical Applications: General Creform heavy duty structures.
LJ-6ALJ-5A
Surface Treatment: Black Coating. Components: L-2A(4), M8-40B(4 ea). Used With: ø42 HL4, HLC pipe. Typical Applications: General Creform heavy duty structures.
Surface Treatment: Black Coating. Components: L-7A(2), M8-30B(1 ea). Used With: ø42 HL4, HLC pipe. Typical Applications: General Creform heavy duty structures.
800-839-8823 www.creform.comC-10
SE
CTIO
N
C
CrEfOrmmETAL JOINT SETS – 42mm
Complete joint assemblies for connecting ø42 pipe (HL4-, HLC-). Attachment with M8-40 and M8 nuts unless otherwise noted.
Most commonly used to assemble heavy-duty structures. Dimensions are in millimeters.
85
4085
85
40
85
85
LJ-1A
LJ-3A
LJ-12A-NILJ-7A-NI
Surface Treatment: Conductive Plating. Components: L-5A NI(2), L-6A NI(2), M8-40B(1 ea), M8-30B(1 ea). Used With: ø42 HLGA pipe. Typical Applications: Creform heavy duty anti-static structures.
Surface Treatment: Conductive Plating. Components: L-14A NI(2), L-6A NI(2), M8-40B(2 ea), M8-30B(2 ea). Used With: ø42 HLGA pipe. Typical Applications: Creform heavy duty anti-static structures.
LJ-2A-NILJ-1A-NI
Surface Treatment: Conductive Plating. Components: L-1A NI(2), M8-40B(1 ea). Used With: ø42 HLGA pipe. Typical Applications: Creform heavy duty anti-static structures.
Surface Treatment: Conductive Plating. Components: L-2A NI(1), L-3A NI(1), M8-40B(2 ea). Used With: ø42 HLGA pipe. Typical Applications: Creform heavy duty anti-static structures.
LJ-4A-NILJ-3A-NI
Surface Treatment: Conductive Plating. Components: L-2A NI(2), L-4A NI(1),M8-40B(3 ea). Used With: ø42 HLGA pipe. Typical Applications: Creform heavy duty anti-static structures.
Surface Treatment: Conductive Plating. Components: L-4A NI(2), M8-40B(2 ea). Used With: ø42 HLGA pipe. Typical Applications: Creform heavy duty anti-static structures.
LJ-6A-NILJ-5A-NI
Surface Treatment: Conductive Plating. Components: L-2A NI(4), M8-40B(4 ea). Used With: ø42 HLGA pipe. Typical Applications: Creform heavy duty anti-static structures.
Surface Treatment: Conductive Plating. Components: L-7A NI(2), M8-30B(1 ea). Used With: ø42 HLGA pipe. Typical Applications: Creform heavy duty anti-static structures.
800-839-8823 www.creform.comC-11
SE
CTIO
N
C
CrEfOrmESD mETAL JOINT SETS – 42mm
Complete joint assemblies for connecting ø42 pipe (HLGA-). Attachment with M8-40 and M8 nuts unless otherwise noted.
Most commonly used to assemble heavy-duty anti-static structures. Dimensions are in millimeters.
85
40
85
85
85
4085
ESD anti static
LEJ-12B
44.5
Surface Treatment: Black Coating. Components: L-14A(2),H-6(4), M8-30B(2 ea), M6-25B(2). Used With: ø42 & ø28mm pipe. Typical Applications: General Creform heavy duty structures.
LEJ-1BLEJ-1A
Surface Treatment: Black Coating. Components: LE-1A(2), M8-40B(1). Used With: ø42 & ø28mm pipe. Typical Applications: General Creform heavy duty structures.
Surface Treatment: Black Coating. Components: LE-1B(2), M6-25B(1). Used With: ø42 & ø28mm pipe. Typical Applications: General Creform heavy duty structures.
LEJ-4BLEJ-2B
Surface Treatment: Black Coating. Components: LE-2B(1), LE-3B(1), M6-25B(2). Used With: ø42 & ø28mm pipe. Typical Applications: General Creform heavy duty structures.
Surface Treatment: Black Coating. Components: LE-4B(2), M6-25B(2). Used With: ø42 & ø28mm pipe. Typical Applications: General Creform heavy duty structures.
LEJ-7BLEJ-7A
Surface Treatment: Black Coating. Components: L-6A(2), H-5(2), M8-40B(1), M6-25B(1). Used With: ø42 & ø28mm pipe. Typical Applications: General Creform heavy duty structures.
Surface Treatment: Black Coating. Components: L-5A(2), H-6(2), M8-30B(1), M6-25B(1). Used With: ø42 & ø28mm pipe. Typical Applications: General Creform heavy duty structures.
800-839-8823 www.creform.comC-12
SE
CTIO
N
C
CrEfOrmmETAL JOINT SETS – 42mm/28mm
Complete joint assemblies for connecting ø42 pipe ( HL4-, HLC-) and ø28 pipe (H, HC). Attachment with M8-40 and M8 nuts and M6-25B unless otherwise noted.
Most commonly used to assemble heavy-duty structures. Dimensions are in millimeters.
30
ø33
48 75
LEJ-12B-NI
44.5
Surface Treatment: Conductive Plating. Components: L-14A NI(2), H-6 NI(4), M8-30B(2 ea), M6-25B(2). Used With: ø42 & ø28mm pipe. Typical Applications: Creform heavy duty anti-static structures.
LEJ-1B-NILEJ-1A-NI
Surface Treatment: Conductive Plating. Components: LE-1A NI(2), M8-40B(1). Used With: ø42 & ø28mm pipe. Typical Applications: Creform heavy duty anti-static structures.
Surface Treatment: Conductive Plating. Components: LE-1B NI(2), M6-25B(1). Used With: ø42 & ø28mm pipe. Typical Applications: Creform heavy duty anti-static structures.
LEJ-4B-NILEJ-2B-NI
Surface Treatment: Conductive Plating. Components: LE-2B NI(1), LE-3B NI(1), M6-25B(2). Used With: ø42 & ø28mm pipe. Typical Applications: Creform heavy duty anti-static structures.
Surface Treatment: Conductive Plating. Components: LE-4B NI(2), M6-25B(2). Used With: ø42 & ø28mm pipe. Typical Applicataions: Creform heavy duty anti-static structures.
LEJ-7B-NILEJ-7A-NI
Surface Treatment: Conductive Plating. Components: L-6A NI(2), H-5 NI(2), M8-40B(1), M6-25B(1). Used With: ø42 & ø28mm pipe. Typical Applications: Creform heavy duty anti-static structures.
Surface Treatment: Conductive Plating. Components: L-5A NI(2), H-6 NI(2), M8-30B(1), M6-25B(1). Used With: ø42 & ø28mm pipe. Typical Applications: Creform heavy duty anti-static structures.
800-839-8823 www.creform.com
CreformeSD meTAL JoINT SeTS – 42mm/28mm
Complete joint assemblies for connecting ø42 pipe (HLGA-) and ø28 pipe (HGA, HGD). Attachment with M8-40 and M8 nuts and M6-25B unless otherwise noted.
Most commonly used to assemble heavy-duty anti-static structures. Dimensions are in millimeters.
C-13
Se
CTIo
N
C
30
ø33
48 75
ESD anti static
SJ-100-E-SUS SK-100-E-SUS
800-839-8823 www.creform.comESD anti static
I-11
SJ-100S-E-SUS
Type Caster & Diameter
Part NumberLoading Maximum
CapacityPlate Size
PitchTuggable
Swivel Radius E
Height H
ESD Spec’s
Rubber ESD Kgs. Lbs. F1 x F2 P1 x P2 P3 x P4
Swivel ø100
SJ-100-E-SUS 120 264 90 x 90 68 x 68 71 x 71 Yes 35 132106
or under
Swivel w/Stop ø100
SJ-100S-E-SUS 120 264 90 x 90 68 x 68 71 x 71 Yes 35 132106
or under
Fixed ø100
SK-100-E-SUS 120 264 110 x 77 80 x 45 90 x 50 Yes — 132106
or under
Loading maximum capacity is per wheel.
E
H H
se
ctIo
n
I
se
ctIo
n
I
creform staInless steel
Bolt-on casters
Swivel Swivel w/Stop Fixed
SJ-E-SUS and SK-E-SUS casters mount directly to the pipe and are attached using mating reinforcement metal straps. These casters can be used for both manually and motorized pushing/pulling carts or dollies.
Suffix S = with stop; ESD = electrostatic discharge. Dimensions are in millimeters.
P4
P2
F2
P1P3P5F1
2-D2
4-D1
P2
P4
F2
P1P3P5
F1
4-D
1
2-D2
800-839-8823 www.creform.comESD anti static
I-12
YGR-E-SUS YGR-S-E-SUS
Type Caster &
Diameter
Part Number
Loading Maximum Capacity Swivel
Radius
Height to
Pipe End
ESD Spec’s
Rubber ESD Kgs. Lbs.
Swivel ø50 YGR-50-E-SUS 30 66 20 70.6 106 or under
Swivel w/Stop ø50 YGR-50S-E-SUS 30 66 20 70.6 106 or under
Swivel ø75 YGR-75-E-SUS 30 66 30 99 106 or under
Swivel w/Stop ø75 YGR-75S-E-SUS 30 66 30 99 106 or under
Swivel ø100 YGR-100-E-SUS 50 110 32 129 106 or under
Swivel w/Stop ø100 YGR-100S-E-SUS 50 110 32 129 106 or under
Loading maximum capacity is per wheel.
YGR-E-SUS and YGR-S-E-SUS casters are designed to fit the I.D. of ø27 stainless steel pipe, secured by expanding a rubber mandrel. An EK-20 caster wrench is required to tighten mandrel. Be sure to debur pipe sufficiently.
Suffix S = with stop; ESD = electrostatic discharge. Dimensions are in millimeters.
EK-20
se
ctIo
n
I
creform staInless steel
stem casters
Swivel Swivel w/Stop
Caster Wrench for YGR Casters