Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
TIC-50CAP(Inner cap: PP, Outer cap: AS)
TFC-CAP(PP)
TRC inside lid(PE)
Inner jar
Outer jar
TJCTIC
Inner jar
Outer jar
TFC inside lid(PE)
TMC・TDC・TIC・TJCC R E A M
50g
30g
20g
6g
■ Numbers are based on rough standard of usage. Please test filling, tolerance, etc., on the actual article for confirmation.■ Capacity and jar size are our standard measurements (before decoration/coloring). It may differ from actual measurements.■ Please note that we may partly change standards and specifications. ■ Capacity: capacity without inside lid.
Product name Capacity[mL] Full Volume O.F.
Jar size[mm]Forming method Material
Compatible caps / accessories
H W1 W2 Cap Inside Lid
TMC-6 9.5 14.6 43φInjection PP
TMC-6CAP (PP)
TDC-20 26.1 19.7 53.5φ 47.4φ TDC-20CAP (PP) *
TIC-30 46.6 33 65φInjection
(Insert molding)PET (Inner jar)PET (Outer jar)
TIC-50CAPTFC-50CAP TFC-50 inside Lid
TIC-50 66.8 44.1 65φ
TJC-30 42.3 43.5 56.5φ 60φ TJC-30CAP (PP) TRC-30 inside Lid
* Without packing
TIC・TJC■ Half-turn cap, easy to open and close.
■ Jar: Customizing outer and inner parts. Insert molding technique create a variation of contrast and options.
TMC・TDC■ TMC is thin type posting in Japan: 17.2mm* thick when cap is set.
■ TDC: 21.8mm* thick
* Standard measurements (before decoration/coloring)
TMC-6 TDC-20 TIC-30 TIC-50 TJC-30
TFC-CAP(PP)
Inner jar
Outer jar
180°
TFC inside lid(PE)
TFCC R E A M
■ Numbers are based on rough standard of usage. Please test filling, tolerance, etc., on the actual article for confirmation.■ Capacity and jar size are our standard measurements (before decoration/coloring). It may differ from actual measurements.■ Please note that we may partly change standards and specifications. ■ Capacity: capacity without inside lid.
Product name Capacity[mL] Full Volume O.F.
Jar size[mm]Forming method Material
Compatible caps / accessories
H W1 Cap Inside Lid
TFC-5 6.5 20.3 31.5φInjection PP
TFC-5CAP
TFC-10 12 25.3 36.7φ TFC-10CAP
TFC-30 41.5 37.1 53φ
Injection(Insert molding)
PP (Inner jar)PP (Outer jar)
TFC-30CAP TFC-30 inside lid
TFC-50 65.2 41.8 59.6φ TFC-50CAP TFC-50 inside lid
TFC-60 77.1 43.6 62.5φ TFC-60CAP TFC-60 inside lid
TFC-100 120.2 51 72φ TFC-100CAP TFC-100 inside lid
100g
60g
50g
30g
10g
5g
TFC-30・50・60・100■ Half-turn cap, easy to open and close.
■ Jar: Customizing outer and inner parts. Insert molding technique create a variation of contrast and options.
TFC-5 TFC-10 TFC-30 TFC-50 TFC-60 TFC-100
Z-1000-C001TBW-34.4φ(Inner cap: PP, Outer cap: AS)
TB-34.4φTOV flip top cap(PP, hole diameter: 4.5mm)
TBFL O T I O N ・ A T O M I Z E R
■ Numbers are based on rough standard of usage. Please test filling, tolerance, etc., on the actual article for confirmation. ■ Capacity and bottle size are our standard measurements (before decoration/coloring). It may differ from actual measurements.■ Please note that we may partly change standards and specifications. ■ For further information on caps and accessories without details, refer to the GLASEL THAILAND Standard Catalog 2014.
Product name (Weight) Capacity[mL] Full Volume O.F.Bottle size[mm]
Forming method MaterialCompatible caps / accessories
H W1 Cap Stopper Dispenser
TBF-100 (15.5g) 120 104.5 43φ
Injection stretch blow PET
TOVflip top cap Z-1000-C001
Z-1000-24-R41Z-305-101
TBF-150 (21.5g) 174 129.5 46φ
TBF-100 (24g) 114 104.5 43φ TB-34.4φTBW-34.4φ
TB-24-3φTB-24-5φTB-24-8φTBF-150 (30g) 167 129.5 46φ
150mL
100mL
TBF-100 TBF-150
TBF■ Easy to discharge and squeeze even with a cap. Thin-walled injection stretch blow PET bottle.
Forming is possible with existing thickness (24g/30g). It can be chosen depending on the contents. (Not squeezable)
Z-100-101
PCV-470
Z-200-C093F
PCV-431
Z-1000-C001TBW-34.4φ(Inner cap: PP, Outer cap: AS)
TB-34.4φG-100SPRubber: SI Hole cap: PPDropper pipe: soda glass
*Rubber: black is standard.
TBRL O T I O N ・ A T O M I Z E R ・ D R O P P E R
■ Numbers are based on rough standard of usage. Please test filling, tolerance, etc., on the actual article for confirmation. ■ Capacity and bottle size are our standard measurements (before decoration/coloring). It may differ from actual measurements.■ Please note that we may partly change standards and specifications. ■ For further information on caps and accessories without details, refer to the GLASEL THAILAND Standard Catalog 2014.
Product name Capacity[mL] Full Volume O.F.
Bottle size[mm]Forming method Material
Compatible caps / accessories
H W1 W2 Cap Stopper Dispenser
TBR-30 37.3 70.7 26.6φ 33.6φ
Injection stretch blow PET
TB-21.8φ
G-100SP
TBS-18-3φTBS-18-5φ
Y-18Z-100-101Z-100-113
TBR-50 59 87.5 31φ 38φ TB-24.5φTB-20-3φTB-20-5φTB-20-7φ
Y-20Z-200-C093FZ-205-C105F (PP)
TBR-100 114 119.5 34.8φ 43.8φ
TB-34.4φTBW-34.4Φ
TB-24-3φTB-24-5φTB-24-8φ
Z-1000-C001Z-1000-24-R41Z-305-101
TBR-120 136 129 36φ 45.5φ
TBR-150 168 142 38φ 48.1φ
TBR-200 220 154 41.3φ 52.3φ
200mL
150mL
120mL
100mL
50mL
30mL
TBR-30 TBR-50 TBR-100 TBR-120 TBR-150 TBR-200
Z-205-C105F(PP, spray quantity: 0.2cc)
PCV-431 (SB) PCV-498 (SB) PCV-533 (PP)
IB-100-5φ(PE)
IB-100-7.5φIB-100-3φ
(Hole diameter: )7.5mm(Hole diameter:) 5mm(Hole diameter:) 3mm
LR flip top cap(PP, hole diameter: 4mm)
Z-200-C104F *Back-suction type(PP, dosage: 0.2cc)
PCV-431 (SB) PCV-498 (SB) PCV-533 (PP)
IBR-120CAP(PP)
IBRT・IBLT・LRL O T I O N ・ A T O M I Z E R
■ Numbers are based on rough standard of usage. Please test filling, tolerance, etc., on the actual article for confirmation. ■ Capacity and bottle size are our standard measurements (before decoration/coloring). It may differ from actual measurements.■ Please note that we may partly change standards and specifications. ■ For further information on caps and accessories without details, refer to the GLASEL THAILAND Standard Catalog 2014.
Product name Capacity[mL] Full Volume O.F.
Bottle size[mm]Forming method Material
Compatible caps / accessories
H W1 W2 Cap Stopper Dispenser
IBRT-100L 112 130.1 39φ
Injection stretch blow PET
IBR-120CAPIB-100-3φIB-100-5φIB-100-7.5φ
IBRT-120L 133 141.6 40φ
IBLT-120L 133.5 146 40.4φ 43.3φ
IBRT-100A 112 126 39φ Y-20Z-200-C104FZ-200-C093FZ-205-C105FZ-005-C144F
IBRT-120A 133 137.5 40φ
IBLT-120A 133 141.9 40.4φ 43.3φ
LR-150 170 157.9 42.5φ 45.6φ LR flip top cap
150mL
120mL
100mL
IBRT-100AIBRT-100L IBRT-120L IBRT-120A IBLT-120AIBLT-120L LR-150
Product of GLASEL (JAPAN)
Z-1000-C001TOV flip top cap(PP, hole diameter: 4.5mm)
YKC-100QH(PP, dosage: 1.3cc)
TBOS・TBOL・TBHL O T I O N ・ A T O M I Z E R
■ Numbers are based on rough standard of usage. Please test filling, tolerance, etc., on the actual article for confirmation. ■ Capacity and bottle size are our standard measurements (before decoration/coloring). It may differ from actual measurements.■ Please note that we may partly change standards and specifications. ■ For further information on caps and accessories without details, refer to the GLASEL THAILAND Standard Catalog 2014.
Product name Capacity[mL] Full Volume O.F.
Bottle size[mm]Forming method Material
Compatible caps / accessories
H W1 Cap Stopper Dispenser
TBOS-250 261 127.6 58.7φ
Injection stretch blow PET
YKC-100QHTBOL-250 276 154.8 54φ
TBH-500 531 207.1 63φ TOV flip top capZ-1000-C001Z-1000-24-R41Z-305-101
500mL
250mL
TBH■ Easy to discharge and squeeze even with a cap. Thin-walled injection stretch blow PET bottle.
TBOS-250 TBH-500TBOL-250
TOV flip top cap(PP, hole diameter: 4.5mm)
TJF-90 stopper(PE, hole diameter: 2.5mm)
TJF-90CAP(PP)
TJF・TOV・TPOR・TFUL I Q U I D F O U N D A T I O N ・ L O T I O N ・ A T O M I Z E R
■ Numbers are based on rough standard of usage. Please test filling, tolerance, etc., on the actual article for confirmation. ■ Capacity and bottle size are our standard measurements (before decoration/coloring). It may differ from actual measurements.■ Bottle height and neck, etc., may be changed depending on accessories. ■ Please note that we may partly change standards and specifications.■ For further information on caps and accessories without details, refer to the GLASEL THAILAND Standard Catalog 2014.
200mL
90mL
Product name Capacity[mL] Full Volume O.F.
Bottle size[mm] Forming method
Material(Outer layer + Intermediate layer + Inner layer)
Compatible caps / accessories
H W1 W2 L Cap Stopper Dispenser
TJF-90 105 122.1 47.1 29.3
Direct blow
PE+EV+PETJF-90CAP TJF-90 stopper *
TOV-200 218 147.5 50 46TOV
flip top cap
Z-1000-C001Z-1000-24-R41Z-305-101
TPOR-200 221 167.6 45.4φPE
TFU-250 287 109.3 76.1 90.6 57.8
* TJF-90 stopper is leak-proof while opening.
250mL
TJF-90 TOV-200 TPOR-200 TFU-250
TDRTDS
TDS・TDR・TDMJ■ Embossment is available on the side.
TDMJ
Z-3000-C062 (PP, dosage: 3.0cc)■ Rotating-lock type
■ Back-suction type: It is capable of restricting solidification of the contents remaining at a jet nozzle by bringing it into pump.
■ Z-3000-C068: with embossment on top surface
YKC-350XN (PP, dosage: 3.5cc)■ Rotating-lock type
■ YKC-350YN: with embossment on top surface
Top surface
TDS・TDR・TDMJA T O M I Z E R
■ Numbers are based on rough standard of usage. Please test filling, tolerance, etc., on the actual article for confirmation.■ Capacity and bottle size are our standard measurements (before decoration/coloring). It may differ from actual measurements.■ Bottle height and neck, etc., may be changed depending on accessories. ■ Please note that we may partly change standards and specifications.
550mL
Product name Capacity[mL] Full Volume O.F.
Bottle size[mm]Forming method Material
Compatible caps / accessories
H W1 W2 L Cap Stopper Dispenser
TDS-550 620 183.3 96.5 78 62
Direct blow PE Z-3000-C062YKC-350XNTDR-550 620 183.3 87 82 64.1
TDMJ-550 630 162.9 108.3 60.9
TDS-550 TDR-550 TDMJ-550
TS stopper(PE)
TS CAP(PP)
Z-100-113
PCV-470
TB-21.8φG-100SPRubber: SI Hole cap: PPDropper pipe: soda glass
*Rubber: black is standard.
TBIS・TSL O T I O N ・ A T O M I Z E R ・ D R O P P E R
■ Numbers are based on rough standard of usage. Please test filling, tolerance, etc., on the actual article for confirmation.■ Capacity and bottle size are our standard measurements (before decoration/coloring). It may differ from actual measurements.■ Please note that we may partly change standards and specifications. ■ For further information on caps and accessories without details, refer to the GLASEL THAILAND Standard Catalog 2014.
TS-15TBIS-15
Product name Capacity[mL] Full Volume O.F.
Bottle size[mm]Forming method Material
Compatible caps / accessories
H W1 Cap Stopper Dispenser
TBIS-15 21 66.7 24.5φ Injection stretch blow PET TB-21.8φ
G-100SP
TBS-18-3φTBS-18-5φ
Y-18Z-100-101Z-100-113
TS-3 3.7 35 15φ
Direct blow PE
TS-5CAP TS-5 stopper(Hole diameter: 1.5mm)TS-5 5.7 49.1 15.2φ
TS-10 11.5 58.3 19φ TS-10CAP TS-10 stopper(Hole diameter: 2mm,5mm)TS-15 17.1 59.3 23.2φ TS-15CAP
15mL
10mL
5mL
3mL
TS-3 TS-5 TS-10
Pipe
Base
Cap
Cup
Ring
[ Par t nam es ]
Spindle
Moving up and down with a spindle at its center.
Regular
Spiral structure is in a pipe to move up and down.
Slim
Spiral structure is on the bottom to move up and down.
Pipe
Base
Cap
Cup
Ring
[ Par t nam es ]
Spindle
Moving up and down with a spindle at its center.
Regular
Spiral structure is in a pipe to move up and down.
Slim
Spiral structure is on the bottom to move up and down.
KP・TLIP・TDEOL I P S T I C K
■ Please test fi lling, tolerance, etc., on the actual article for confi rmation.■ Size (all parts are set) is our standard measurements (before decoration/coloring). It may diff er from actual measurements.■ Please note that we may partly change standards and specifi cations.
Product nameSize[mm]
Inner diameter of cup Mechanism FillingCompatible caps / accessories
H W Base Ring Pipe Cap Cup
KP-142 72.3 16.1φ 10.85φ
Regular Putting ALAL
AL AL POMKP-165 82 14φ 10φ
KP-166 80 14φ 10φ
KP-121 81.3 12.8φ 9φ*
Slim
Direct
ABS ABS
PP
KP-144 71.7 18.2φ 10.85φ PuttingAL
POM
KP-157 84.5 15.6φ 8.65φDirect
ABSPP
TLIP-SI 83 13.5φ 1.02φ SpindlePP PP
TDEO-F 96 35φ 24φ Slim Bottom PP PET
KP-121 KP-144
KP-142
KP-157
KP-165
TLIP-SI
KP-166
TDEO-F
* Reference size of lipstick diameter