CREATE YOUR STYLE MINI PROJECTS CRYSTAL PEARLS

WWW.CREATE-YOUR-STYLE.COM

CREATE YOUR STYLEMINI PROJECTS

NEONCOLORS CRYSTAL PEARLS

Materials

SWAROVSKI ELEMENTS

CONFETTI SPIRAL BRACELET

MINI PROJECT “CRYSTAL PEARLS NEONCOLORS”


Supplies: 6 balled head pins Beadalon 312B-253 6 coils of Remembrance Memory Wire Beadalon JMBT-0.25Z

Continuation on next page

Product Group Article No. Amount Size Color Color Code

Beads 5328 2 pcs. 6 mm Fireopal AB 2x 237

Crystal Pearls 5810 11 pcs. 4 mm Crystal Neon Orange Pearl 001 733

Crystal Pearls 5810 11 pcs. 4 mm Crystal Neon Pink Pearl 001 732

Crystal Pearls 5810 11 pcs. 4 mm Crystal Neon Yellow Pearl 001 734











“Confetti – Spiral Bracelet”, page 2

Instructions

STEP 1: Measure out 6 coils of memory wire and cut (using a memory wire cutter). Turn one end of wire to create a circular loop.

STEP 2: String on one Crystal Pearl art. 5810 4 mm Crystal Neon Yellow Pearl, one Crystal Pearl art. 5810 4 mm Crystal Neon Pink Pearl, one Crystal Pearl art. 5810 4 mm Crystal Neon Orange Pearl, one Crystal Pearl art. 5810 6 mm Crystal Neon Yellow Pearl, one Crystal Pearl art. 5810 6 mm Crystal Neon Pink Pearl, one Crystal Pearl art. 5810 6 mm Crystal Neon Orange Pearl, one Crystal Pearl art. 5810 8 mm Crystal Neon Yellow Pearl, one Crystal Pearl art. 5810 8 mm Crystal Neon Pink Pearl, one Crystal Pearl art. 5810 8 mm Crystal Neon Orange Pearl, one Crystal Pearl art. 5810 10 mm Crystal Neon Yellow Pearl, one Crystal Pearl art. 5810 10 mm Crystal Neon Pink Pearl, and one Crystal Pearl art. 5810 10 mm Crystal Neon Orange Pearl. Repeat this pattern 10 more times.

STEP 3: Trim wire to ½” on the end. Turn the end of the wire to create a circular loop.

STEP 4: Using one balled head pin, slip on one Swarovski Bead art. 5328 6 mm Fireopal AB 2x. Create a simple loop. Repeat once.

STEP 5: Repeat above step using the four remaining Crystal Pearl art. 5810 6 mm Crystal Neon Orange Pearl and Crystal Neon Yellow Pearls.

STEP 6: Attach one of each color drops make in steps 4 and 5 to both ends of the bracelet.

Materials

SWAROVSKI ELEMENTS

CONFETTI LINKED BAUBLE BRACELET

MINI PROJECT “CRYSTAL PEARLS NEONCOLORS ”


Supplies: 29 2” eye pins in nickle Tierracast 01-00027-01 1 silver magnetic clasp








Instructions

STEP 1: String one Crystal Pearl art. 5810 10 mm Crystal Neon Orange Pearl and one Bead art. 5328 in Fireopal AB 2x onto 4 of the eye pins. On 5 other eye pins string on the Bead art. 5328 fi rst and then add the Crystal Pearl art. 5810 10 mm Crystal Neon Orange Pearl. Trim the eye pin to about ½ inch and turn a simple loop.

STEP 2: Repeat the above step with 9 Crystal Neon Yellow Pearls and 9 Crystal Neon Pink Pearls. Repeat this step alsofor the remaining Crystal Neon Yellow Pearls and Crystal Pink Pearls, except do not add the Bead art. 5328.

STEP 3: String on one Crystal Pearl art. 5810 14 mm Crystal Neon Orange Pearl onto an eye pin. Trim to ½” and turna simple loop. Repeat for the remaining 9 Crystal Pearls art. 5810 14 mm Crystal Neon Orange Pearl.

STEP 4: Attach all 10 of the Crystal Pearls art. 5810 14 mm Crystal Neon Orange Pearls together in a row by opening one end of the eye pin loop and attaching it to the loop in one of the other Crystal Pearls art. 5810 14 mm Crystal Neon Orange Pearls.


“Confetti Linked – Bauble Bracelet”, page 2

STEP 5: Add the Crystal Pearl art. 5810 10 mm Crystal Neon Yellow Pearl without the Bead to one end of the above strand and the Crystal Pearl art. 5810 10 mm Crystal Neon Pink Pearl without the Bead to the other end.

STEP 6: Attach one Crystal Neon Yellow Pearl, Crystal Neon Pink Pearl and Crystal Neon Orange Pearl beaded eye pin to the connecting loops in between each of the Crystal Pearls art. 5810 14 mm Crystal Neon Orange Pearls on the strand.

STEP 7: Attach one end of the magnetic clasp to one end of the bracelet by opening the loop on the last Crystal Pearl art. 5810 14 mm Crystal Neon Orange Pearl. Repeat for other side of bracelet. Make sure that all eye pin loops are closed securely.

Materials

SWAROVSKI ELEMENTS

CONFETTIHOOP EARRINGS



Supplies: 30 balled head pins Beadalon 312B-253 2 7” coils of Remembrance Memory Wire Beadalon JMBT-0.25Z 2 silver fi lled blank ear wires Tierracast 90-8120-00







Instructions

STEP 1: String one Crystal Pearl art. 5810 6 mm Crystal Neon Pearl onto one of the balled head pins. Trim to ½” and turn a simple loop. Repeat with remaining Crystal Pearls 6mm.

STEP 2: Turn a simple loop onto one end of one of the Remembrance Wire pieces. String on 16 Beads art. 5328 4 mm Fireopal AB 2x.

STEP 3: Add one of each color head pin loops made in step 1. Add three more Beads art. 5328 4 mm Fireopal AB 2x. Repeat this step three more times and then add another set of each color of the head pin loops.

STEP 4: String on 16 Beads art. 5328 4 mm Fireopal AB 2x more. Trim wire with memory wire cutters if necessary to ½” and turn a simple loop.

STEP 5: String on the Crystal Neon Pink Pearl 4 mm to the bottom of the ear wire. Turn a simple loop and link it to the two looped ends of the memory wire. Close the loop on the ear wire. Repeat all steps to make the other earring.

Materials

SWAROVSKI ELEMENTS

POWERFUL PINK TOURSADE



Supplies: 1 classic S hook clasp Tierracast 94-6147-27 14” double link chain in gold plated brass or brass oxide 9” copper wire 23 6 mm jump rings Tierracast 01-0025-09 8 crimp beads Tierracast 01-0030-27 2 1 ¼” radiant rings Tierracast 94-3112-27 8 3 mm crimp covers Tierracast 01-0032-27 96” 49 Strand Beadalon stringing wire



Beads 5050 4 pcs. 22x16 mm Crystal Astral Pink 001 API

Beads 5328 68 pcs. 4 mm Crystal Astral Pink 001 API





Beads 5624 3 pcs. 10 mm Crystal Neon Pink 001 API

Pendants 6106 13 pcs. 16 mm Crystal Neon Pink 001 API


“Powerful Pink – Toursade”, page 2

Instructions

STEP 1: Cut two 1 ½” pieces of chain and six 1 ¾” pieces of chain. Open a jump ring and attach to one of the Tierracast radiant rings and to one of the 1 ½” pieces of chain.

STEP 2: Insert one end of the copper wire through the last link in this piece of chain and make a wrapped loop. String one Bead art. 5050 onto this wire and trim the wire to ½” of the Bead. Attach this end to one of the 1 ¾” pieces of chain and make a wrapped loop on the other end.

STEP 3: Repeat step 2 using the Bead art. 5624, attaching it first to the end of the chain from step 2 and the other end to a new piece of 1 ¾” chain. Repeat step 2 and 3 alternating Bead art. 5050 and 5624.

STEP 4: Attach the last 1 ½” piece of chain to the last Bead art. 5050 and attached a jump ring to the other end of the chain and to the second radiant ring.

STEP 5: Cut the stringing wire into 4 equal lengths and set aside.

STEP 6: Using one piece of wire, slide on a crimp bead and string the wire through one of the jump rings and back through the crimp bead. Crimp the bead, cut off excess wire and attach crimp cover over Bead. (This process should only use about ½ -1” of wire.)

STEP 7: String on all of the Crystal Pearls art. 5810 4 mm Crystal Neon Pink Pearls. Repeat the crimping process from step 6 on the other end of the wire. Open the jump rings on both ends and attach to each side to one of the radiant rings that the chain is also attached to.

STEP 8: Repeat steps 6 and 7 for the Crystal Pearl 10 mm Crystal Neon Pink Pearls.

STEP 9: Repeat steps 6 and 7 with the Crystal Pearl 6 mm Crystal Neon Pink Pearls and 38 of the Beads art. 5328 Crystal Astral Pink varying the number of Crystal Pearls and Beads in the pattern desired.

STEP 10: Repeat step 9 with the remaining Beads art. 5328 Crystal Astral Pink and the Crystal Pearls 8 mm.

STEP 11: Open one end of the classic “S” clasp if necessary just enough to slide it onto one of the radiant rings. Crimp it closed gently to secure. Open the other end of the clasp slightly if need be so it can be hooked on and off on the other radiant ring on the other end of the necklace.

Documents

CREATE YOUR STYLE MINI PROJECTS CRYSTAL PEARLS