Upload
trinhthien
View
230
Download
3
Embed Size (px)
Citation preview
Product family data sheet
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
Cree, Inc.4600 Silicon Drive
Durham, NC 27703USA Tel: +1.919.313.5300
ww
w.C
Ree.
Co
m/X
LAm
pC
LD-D
S135 Rev
2
Cree® XLamp® XQ-A LEDs
ProDuCt DEsCriPtion
The XLamp® XQ-A LeD brings a
mid-power, cost-effective option to the
proven, compact ceramic XQ package,
enabling lighting manufacturers to quickly
and easily expand their product portfolio
by leveraging a common XQ design.
Unlike plastic mid-power LeDs, the
ceramic-based XQ-A LeDs are designed
to deliver the long-term calculated
lifetimes of Cree’s other high-power
LeDs. The XQ-A LeD’s combination
of optical symmetry and consistency
across all colors improves color mixing
and simplifies the production process
for lighting manufacturers. Available in
both white and color configurations, the
XQ-A LeD family opens up new design
possibilities for a wide spectrum of
lighting applications, such as portable,
directional and architectural lighting.
FEAturEs
• Cree’s smallest lighting class LeD:
1.6 X 1.6 mm
• Available in 70-, 80- & 90-CRI white,
and royal blue, blue, PC blue, green,
PC amber, red-orange & red
• Maximum drive current: white:
300 mA, color: 250 mA
• Wide viewing angle: white: 100°,
royal blue, blue, PC blue, PC amber:
105°, green, red -orange, red: 110°
• Reflow solderable - JEDEC
J-STD-020C compatible
• Unlimited floor life at
≤ 30 °C/85% RH
• RoHS compliant
• UL® recognized component
(e349212)
tAbLE oF ContEnts
Characteristics ........................................2
Flux Characteristics - White ....................3
Flux Characteristics - Color ....................4
Relative Spectral Power Distribution .....6
Relative Flux vs. Junction Temperature .7
electrical Characteristics ........................8
Relative Flux vs. Current .........................9
Relative Chromaticity vs. Current and
Temperature ..........................................11
Typical Spatial Distribution ...................12
Thermal Design .....................................13
Reflow Soldering Characteristics .........14
Notes .....................................................15
Mechanical Dimensions .......................16
Tape and Reel ........................................17
Packaging ..............................................18
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
2
XLamp® XQ-a LED
ChArACtEristiCs
Characteristics unit Minimum typical Maximum
Thermal resistance, junction to solder point - white °C/W 20
Thermal resistance, junction to solder point - royal blue, blue, PC blue °C/W 17
Thermal resistance, junction to solder point - green °C/W 30
Thermal resistance, junction to solder point - PC amber °C/W 20
Thermal resistance, junction to solder point - red-orange, red °C/W 18
Viewing angle (FWHM) - white degrees 100
Viewing angle (FWHM) - royal blue, blue, PC blue, PC amber degrees 105
Viewing angle (FWHM) - green, red-orange, red degrees 110
Temperature coefficient of voltage - white mV/°C -2.8
Temperature coefficient of voltage - royal blue, blue, PC blue mV/°C -4
Temperature coefficient of voltage - green mV/°C -4.3
Temperature coefficient of voltage - PC amber mV/°C -4.2
Temperature coefficient of voltage - red-orange, red mV/°C -2.0
ESD withstand voltage (HBM per Mil-Std-883D) - white, royal blue, blue, PC blue, green, red-orange, red Class 3A
ESD classification (HBM per Mil-Std-883D) - PC amber Class 2
DC forward current-white mA 300
DC forward current - color mA 250
Reverse voltage v 5
Forward voltage (@ 175 mA, 85 °C) - white v 3.0 3.3
Forward voltage (@ 175 mA, 25 °C) - royal blue, blue, PC blue v 3.25 3.6
Forward voltage (@ 175 mA, 25 °C) - green v 3.4 3.6
Forward voltage (@ 175 mA, 25 °C) - PC amber v 3.4 3.7
Forward voltage (@ 175 mA, 25 °C) - red-orange, red v 2.2 2.6
LeD junction temperature °C 150
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
3
XLamp® XQ-a LED
FLuX ChArACtEristiCs - WhitE (tJ = 85 °C)
The following table provides several base order codes for XLamp XQ-A white LeDs. It is important to note that the base order codes listed
here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the
order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
ColorCCt range Minimum Luminous Flux @ 175 mA
Calculated Minimum Luminous Flux (lm)
@ 85 °C**order Code
Minimum Maximum Group Flux (lm) @ 85 °C
Flux (lm) @ 25 °C* 300 mA
Cool White 5000 K 8300 K
M3 45.7 52.6 65.6 XQAAWT-00-0000-00000L3e2
N2 51.7 59.5 74.2 XQAAWT-00-0000-00000L4e2
N3 56.8 65.3 81.6 XQAAWT-00-0000-00000L5e2
70-CRI Minimum
White3700 K 8300 K
M3 45.7 52.6 65.6 XQAAWT-00-0000-00000B3E2
N2 51.7 59.5 74.2 XQAAWT-00-0000-00000B4E2
N3 56.8 65.3 81.6 XQAAWT-00-0000-00000B5E2
Neutral White 3700 K 5300 K
M2 39.8 45.8 57.1 XQAAWT-00-0000-00000L2e4
M3 45.7 52.6 65.6 XQAAWT-00-0000-00000L3e4
Warm White 2700 K 3500 KK3 35.2 40.5 50.5 XQAAWT-00-0000-00000LZe7
M2 39.8 45.8 57.1 XQAAWT-00-0000-00000L2e7
80-CRI Minimum
White2700 K 3500 K
K3 35.2 40.5 50.5 XQAAWT-00-0000-00000HZE7
M2 39.8 45.8 57.1 XQAAWT-00-0000-00000H2E7
90-CRI Minimum
White2850 K 3000 K
K2 30.6 35.2 43.9 XQAAWT-00-0000-00000UYe7
K3 35.2 40.5 50.5 XQAAWT-00-0000-00000UZe7
Notes:• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and ±2 on
CRI measurements. See the Measurements section (page 15).• Typical CRI for Cool White (5000 K – 8300 K CCT) is 70.• Typical CRI for Neutral White (3700 K – 5300 K CCT) is 75.• Typical CRI for Warm White (2600 K – 3700 K CCT) is 80.• Minimum CRI for 70-CRI Minimum White is 70.• Minimum CRI for 80-CRI Minimum White is 80.• Minimum CRI for 90-CRI Minimum White is 90.* Flux values @ 25 °C are calculated and for reference only.** Calculated flux values at 350 mA are for reference only.
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
4
XLamp® XQ-a LED
FLuX ChArACtEristiCs - CoLor (tJ = 25 °C)
The following table provides several base order codes for XLamp XQ-A color LeDs. It is important to note that the base order codes listed
here are a subset of the total available order codes for the product family. For more order codes, as well as a complete description of the
order-code nomenclature, please consult the XLamp XQ Family LEDs Binning and Labeling document.
Color
Dominant Wavelength rangeMinimum Radiant Flux @ 175 mA Calculated
Minimum PPF (µmol/s)*
order CodeMinimum Maximum
Group DWL (nm) Group DWL
(nm) Group Flux (mW)
Royal Blue D36 450 D57 46511 210 0.80 XQAROY-00-0000-000000601
12 250 0.95 XQAROY-00-0000-000000701
Color
Dominant Wavelength rangeMinimum Luminous Flux @ 175 mA
order CodeMinimim Maximum
Group DWL (nm) Group DWL
(nm) Group Flux (lm)
Blue B3 465 B6 485F2 10.7 XQABLU-00-0000-000000T01
G2 13.9 XQABLU-00-0000-000000U01
Color Color binMinimum Luminous Flux @ 175 mA
order CodeGroup Flux (lm)
PC Blue N4B & N5B H0 18.1 XQAAPB-00-0000-000000V01
Color
Dominant Wavelength rangeMinimum Luminous Flux @ 175 mA Calculated
Minimum PPF (µmol/s)*
order CodeMinimum Maximum
Group DWL (nm) Group DWL
(nm) Group Flux (lm)
Green G2 520 G4 535
K2 30.6 0.28 XQAGRN-00-0000-000000Y01
K3 35.2 0.32 XQAGRN-00-0000-000000Z01
M2 39.8 0.36 XQAGRN-00-0000-000000201
Color Color binMinimum Luminous Flux @ 175 mA
order CodeGroup Flux (lm)
PC Amber Y2
J3 26.8 XQAAPA-00-0000-000000X01
K2 30.6 XQAAPA-00-0000-000000Y01
K3 35.2 XQAAPA-00-0000-000000Z01
Note• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 15).* Photosynthetic Photon Flux (PPF) values are calculated and for reference only.
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
5
XLamp® XQ-a LED
Color
Dominant Wavelength rangeMinimum Luminous Flux @ 175 mA
order CodeMinimum Maximum
Group DWL (nm) Group DWL
(nm) Group Flux (lm)
Red-Orange O3 610 O4 620
K2 30.6 XQARDO-00-0000-000000Y01
K3 35.2 XQARDO-00-0000-000000Z01
M2 39.8 XQARDO-00-0000-000000201
Color
Dominant Wavelength rangeMinimum Luminous Flux @ 175 mA Calculated
Minimum PPF (µmol/s)*
order CodeMinimum Maximum
Group DWL (nm) Group DWL
(nm) Group Flux (lm)
Red R2 620 R3 630
J2 23.5 0.61 XQAReD-00-0000-000000W01
J3 26.8 0.70 XQAReD-00-0000-000000X01
K2 30.6 0.80 XQAReD-00-0000-000000Y01
FLuX ChArACtEristiCs - CoLor (tJ = 25 °C) - Continued
Note• Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a
tolerance of ±2 on CRI measurements. See the Measurements section (page 15).* Photosynthetic Photon Flux (PPF) values are calculated and for reference only.
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
6
XLamp® XQ-a LED
rELAtivE sPECtrAL PoWEr DistributionRelative Spectral Power
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Rela
tive
Radi
ant P
ower
Wavelength (nm)
Warm White
Relative Spectral Power
0%
20%
40%
60%
80%
100%
380 430 480 530 580 630 680 730 780
Rela
tive
Radi
ant P
ower
Wavelength (nm)
Royal Blue
Blue
PC Blue
Green
PC Amber
Red-Orange
Red
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
7
XLamp® XQ-a LED
rELAtivE FLuX vs. JunCtion tEMPErAturE (iF = 175 mA)Relative Flux Output vs. Junction Temperature
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Rela
tive
Lum
inou
s Fl
ux
Junction Temperature (ºC)
White
Relative Flux Output vs. Junction Temperature
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Rela
tive
Radi
ant F
lux
Junction Temperature (ºC)
Royal Blue
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
8
XLamp® XQ-a LED
rELAtivE FLuX vs. JunCtion tEMPErAturE (iF = 175 mA) - Continued
ELECtriCAL ChArACtEristiCs (tJ = 85 °C)
Relative Flux Output vs. Junction Temperature
0%
20%
40%
60%
80%
100%
120%
25 50 75 100 125 150
Rela
tive
Lum
inou
s Fl
ux
Junction Temperature (ºC)
Blue
PB Blue
Green
PC Amber
Red-Orange
Red
Electrical Characteristics (Tj = 85ºC)
0
50
100
150
200
250
300
1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70
Forw
ard
Cur
rent
(m
A)
Forward Voltage (V)
White
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
9
XLamp® XQ-a LED
ELECtriCAL ChArACtEristiCs (tJ = 25 °C)
rELAtivE FLuX vs. CurrEnt (tJ = 85 °C)
Electrical Characteristics (Tj = 85ºC)
0
50
100
150
200
250
1.90 2.10 2.30 2.50 2.70 2.90 3.10 3.30 3.50 3.70
Forw
ard
Cur
rent
(m
A)
Forward Voltage (V)
Royal Blue, Blue,PC BlueGreen
PC Amber
Red-Orange, Red
Relative Intensity vs. Current (Tj = 85ºC)
0%
25%
50%
75%
100%
125%
150%
0 50 100 150 200 250 300
Rela
tive
Lum
inou
s Fl
ux
Forward Current (mA)
White
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
10
XLamp® XQ-a LED
rELAtivE FLuX vs. CurrEnt (tJ = 25 °C)Relative Intensity vs. Current
0%
25%
50%
75%
100%
125%
150%
0 50 100 150 200 250
Rela
tive
Radi
ant F
lux
Forward Current (mA)
Royal Blue
Relative Intensity vs. Current
0%
25%
50%
75%
100%
125%
150%
0 50 100 150 200 250
Rela
tive
Lum
inou
s Fl
ux
Forward Current (mA)
Blue, PC Blue
Green
PC Amber
Red-Orange
Red
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
11
XLamp® XQ-a LED
ReLAtive ChRoMAtiCity vs. CuRRent And teMpeRAtuRe (WARM White)Relative Chromaticity Vs. Current, WW
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
0 50 100 150 200 250 300
Current (mA)
ΔCCx
ΔCCy
Relative Chromaticity Vs. Temperature, WW
-0.020
-0.015
-0.010
-0.005
0.000
0.005
0.010
0.015
0.020
25 50 75 100 125 150
Tsp (°C)
ΔCCx
ΔCCy
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
12
XLamp® XQ-a LED
tyPiCAL sPAtiAL DistributionTypical Spatial Radiation Pattern-white
0%
20%
40%
60%
80%
100%
120%
-90 -70 -50 -30 -10 10 30 50 70 90
Rela
tive
Lum
inou
s In
tens
ity
Angle (º)
White
Typical Spatial Radiation Pattern-color
0%
20%
40%
60%
80%
100%
120%
-90 -70 -50 -30 -10 10 30 50 70 90
Rela
tive
Lum
inou
s In
tens
ity
Angle (º)
Royal Blue, BluePC BlueGreen
PC Amber
Red-Orange, Red
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
13
XLamp® XQ-a LED
thErMAL DEsiGn
The maximum forward current is determined by the thermal resistance between the LeD junction and ambient. It is crucial for the end
product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life
and optical characteristics.
White royal blue, blue, PC blue
Thermal Design - white
0
50
100
150
200
250
300
350
0 20 40 60 80 100 120 140 160
Max
imu
m C
urr
ent
(mA
)
Ambient Temperature (ºC)
Rj-a = 25 °C/W
Rj-a = 30 °C/W
Rj-a = 35 °C/W
Rj-a = 40 °C/W
Thermal Design - blue
0
50
100
150
200
250
300
0 20 40 60 80 100 120 140 160
Max
imu
m C
urr
ent
(mA
)
Ambient Temperature (ºC)
Rj-a = 20 °C/W
Rj-a = 25 °C/W
Rj-a = 30 °C/W
Rj-a = 35 °C/W
Green PC Amber
Thermal Design - green
0
50
100
150
200
250
300
0 20 40 60 80 100 120 140 160
Ma
xim
um
Cu
rre
nt
(mA
)
Ambient Temperature (ºC)
Rj-a = 40 °C/W
Rj-a = 45 °C/W
Rj-a = 50 °C/W
Rj-a = 55 °C/W
Thermal Design - PC amber
0
50
100
150
200
250
300
0 20 40 60 80 100 120 140 160
Ma
xim
um
Cu
rre
nt
(mA
)
Ambient Temperature (ºC)
Rj-a = 25 °C/W
Rj-a = 30 °C/W
Rj-a = 35 °C/W
Rj-a = 40 °C/W
red-orange, red
Thermal Design - red-orange, red
0
50
100
150
200
250
300
0 20 40 60 80 100 120 140 160
Ma
xim
um
Cu
rre
nt
(mA
)
Ambient Temperature (ºC)
Rj-a = 20 °C/W
Rj-a = 25 °C/W
Rj-a = 30 °C/W
Rj-a = 35 °C/W
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
14
XLamp® XQ-a LED
rEFLoW soLDErinG ChArACtEristiCs
In testing, Cree has found XLamp XQ-A LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general
guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used,
and therefore it is the lamp or luminaire manufacturer’s responsibility to determine applicable soldering requirements.
Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment.
Profile Feature Lead-Free solder
Average Ramp-Up Rate (Tsmax to Tp) 1.2 °C/second
Preheat: Temperature Min (Tsmin) 120 °C
Preheat: Temperature Max (Tsmax) 170 °C
Preheat: Time (tsmin to tsmax) 65-150 seconds
Time Maintained Above: Temperature (TL) 217 °C
Time Maintained Above: Time (tL) 45-90 seconds
Peak/Classification Temperature (Tp) 235 - 245 °C
Time Within 5 °C of Actual Peak Temperature (tp) 20-40 seconds
Ramp-Down Rate 1 - 6 °C/second
Time 25 °C to Peak Temperature 4 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
IPC/JEDEC J-STD-020C
TP
TL
Tem
pera
ture
Timet 25˚C to Peak
Preheatts
tS
tP
25
Ramp-down
Ramp-up
Critical ZoneTL to TP
Tsmax
Tsmin
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
15
XLamp® XQ-a LED
notEs
MeasurementsThe luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only
and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number
of factors that are not within Cree’s control and are not intended or provided as operational specifications for the products. Calculated
values are provided for informational purposes only and are not intended or provided as specifications.
pre-Release Qualification testingPlease read the LeD Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp
LEDs and details of Cree’s pre-release qualification testing for XLamp LEDs.
Lumen MaintenanceCree now uses standardized IeS LM-80-08 and TM-21-11 methods for collecting long-term data and extrapolating LeD lumen maintenance.
For information on the specific LM-80 data sets available for this LED, refer to the public LM-80 results document.
Please read the Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance testing and forecasting.
Please read the Thermal Management application note for details on how thermal design, ambient temperature, and drive current affect
the LeD junction temperature.
Moisture sensitivityCree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering.
Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity.
Once the MBP is opened, XLamp XQ-A LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in
conditions of ≤ 30 ºC/85% relative humidity (RH). Regardless of storage condition, Cree recommends sealing any unsoldered LEDs in the
original MBP.
rohs ComplianceThe levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold
limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as
implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product
ecology section of the Cree website.
uL® recognized ComponentThis product meets the requirements to be considered a UL Recognized Component with Level 1 enclosure consideration. The LeD
package or a portion thereof has not been investigated as a fire enclosure or a fire and electrical enclosure per ANSI/UL 8750.
vision AdvisoryWARNING: Do not look at an exposed lamp in operation. eye injury can result. For more information about LeDs and eye safety, please
refer to the LeD eye Safety application note.
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
16
XLamp® XQ-a LED
MEChAniCAL DiMEnsions
Thermal vias, if present, are not shown on these drawings.
All dimensions in mm.
Measurement tolerances unless indicated otherwise: ±.13 mm
.SIZE
TITLE
OF
REV.
SHEETC
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300Fax (919) 313-5558
4600 Silicon DriveDurham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°.XXX ± .25.XX ± .75.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125X° ± .5°
UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH: 1.6
.30
1.60
.65
1.60
.30
1.50
3.300
3.30
1.60
1.60
1.60
1.50
.60 .60
.30
R.936
.38
.44
1/145.000D2610-00035
XQE_XQA OUTLINE
--
--
7/19/13J. Nevins
----
7/19/13D. Seibel
REVISONSREV DESCRIPTION BY DATE APP'D A Initial Release DDS 7/19/13 B UPDATED OVERALL COMPONENT HEIGHTDC 6/9/15C ADDED OPTICAL REF. DC 12/8/15YCD CHANGED HEIGHT TO BLEND XQE/XQA TOGETHERDC 12/17/15SL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED
OPTICAL REFERENCE
SOLDER PADREFERENCE
OPTICAL REFERENCE
NOTCH IS ONCATHODE(-) SIDE
top view side view bottom view
SIZE
TITLE
OF
REV.
SHEETC
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300Fax (919) 313-5558
4600 Silicon DriveDurham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°.XXX ± .25.XX ± .75.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125X° ± .5°
UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH: 1.6
.30
1.60
.65
1.60
.30
1.50
3.300
3.30
1.60
1.60
1.60
1.50
.60 .60
.30
R.936
.38
.44
1/145.000D2610-00035
XQE_XQA OUTLINE
--
--
7/19/13J. Nevins
----
7/19/13D. Seibel
REVISONSREV DESCRIPTION BY DATE APP'D A Initial Release DDS 7/19/13 B UPDATED OVERALL COMPONENT HEIGHTDC 6/9/15C ADDED OPTICAL REF. DC 12/8/15YCD CHANGED HEIGHT TO BLEND XQE/XQA TOGETHERDC 12/17/15SL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED
OPTICAL REFERENCE
SOLDER PADREFERENCE
OPTICAL REFERENCE
NOTCH IS ONCATHODE(-) SIDE
SIZE
TITLE
OF
REV.
SHEETC
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300Fax (919) 313-5558
4600 Silicon DriveDurham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°.XXX ± .25.XX ± .75.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125X° ± .5°
UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH: 1.6
.30
1.60
.65
1.60
.30
1.50
3.300
3.30
1.60
1.60
1.60
1.50
.60 .60
.30
R.936
.38
.44
1/145.000D2610-00035
XQE_XQA OUTLINE
--
--
7/19/13J. Nevins
----
7/19/13D. Seibel
REVISONSREV DESCRIPTION BY DATE APP'D A Initial Release DDS 7/19/13 B UPDATED OVERALL COMPONENT HEIGHTDC 6/9/15C ADDED OPTICAL REF. DC 12/8/15YCD CHANGED HEIGHT TO BLEND XQE/XQA TOGETHERDC 12/17/15SL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED
OPTICAL REFERENCE
SOLDER PADREFERENCE
OPTICAL REFERENCE
NOTCH IS ONCATHODE(-) SIDE
Optical Reference
Optical Reference
Notch is on cathode (-) side
SIZE
TITLE
OF
REV.
SHEETC
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300Fax (919) 313-5558
4600 Silicon DriveDurham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°.XXX ± .25.XX ± .75.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125X° ± .5°
UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH: 1.6
.30
1.60
.65
1.60
.30
1.50
3.300
3.30
1.60
1.60
1.60
1.50
.60 .60
.30
R.936
.38
.44
1/145.000D2610-00035
XQE_XQA OUTLINE
--
--
7/19/13J. Nevins
----
7/19/13D. Seibel
REVISONSREV DESCRIPTION BY DATE APP'D A Initial Release DDS 7/19/13 B UPDATED OVERALL COMPONENT HEIGHTDC 6/9/15C ADDED OPTICAL REF. DC 12/8/15YCD CHANGED HEIGHT TO BLEND XQE/XQA TOGETHERDC 12/17/15SL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED
OPTICAL REFERENCE
SOLDER PADREFERENCE
OPTICAL REFERENCE
NOTCH IS ONCATHODE(-) SIDE
recommended trace layout
recommended PCb solder pad
SIZE
TITLE
OF
REV.
SHEETC
DRAWING NO.
DATE
DATE
DATE
CHECK
FINAL PROTECTIVE FINISH
MATERIAL
APPROVED
DRAWN BY
THIRD ANGLE PROJECTION
SCALE
A
B
C
D
123456
6 5 4 3 2 1
A
B
C
D
Phone (919) 313-5300Fax (919) 313-5558
4600 Silicon DriveDurham, N.C 27703
UNAUTHORIZED PERSON WITHOUT THE WRITTEN CONSENTMAY NOT BE COPIED, REPRODUCED OR DISCLOSED TO ANY CONFIDENTIAL INFORMATION OF CREE, INC. THIS PLOT CONTAINED WITHIN ARE THE PROPRIETARY ANDCREE CONFIDENTIAL. THIS PLOT AND THE INFORMATION
OF CREE INC.
NOTICE
X° ± .5°.XXX ± .25.XX ± .75.X ± 1.5
FOR SHEET METAL PARTS ONLY
.XX ± .25
.XXX ± .125X° ± .5°
UNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN
MILLIMETERS AND AFTER FINISH.TOLERANCE UNLESS SPECIFIED:
SURFACE FINISH: 1.6
.30
1.60
.65
1.60
.30
1.50
3.300
3.30
1.60
1.60
1.60
1.50
.60 .60
.30
R.936
.38
.44
1/145.000D2610-00035
XQE_XQA OUTLINE
--
--
7/19/13J. Nevins
----
7/19/13D. Seibel
REVISONSREV DESCRIPTION BY DATE APP'D A Initial Release DDS 7/19/13 B UPDATED OVERALL COMPONENT HEIGHTDC 6/9/15C ADDED OPTICAL REF. DC 12/8/15YCD CHANGED HEIGHT TO BLEND XQE/XQA TOGETHERDC 12/17/15SL
RECOMMENDED PC BOARD SOLDER PAD
RECOMMENDED TRACE LAYOUT
ALL DIMENSIONS ARE ± .13MM UNLESS OTHERWIDE NOTED
OPTICAL REFERENCE
SOLDER PADREFERENCE
OPTICAL REFERENCE
NOTCH IS ONCATHODE(-) SIDE
Solder pad reference
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
17
XLamp® XQ-a LED
tAPE AnD rEEL
All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard.
except as noted, all dimensions in mm [in].
Measurement tolerances unless indicated otherwise: .xx = ±.25 mm, .xxx = . ± 125 mm
CATHODE SIDE
ANODE SIDE
CATHODE SIDE
ANODE SIDECATHODE SIDE
ANODE SIDE
CATHODE SIDE
ANODE SIDE
Loaded Pockets(2,000 Lamps) Leader
400 mm (min) ofempty pockets with
at least 100 mmsealed by tape
(50 empty pockets min.)
Trailer160 mm (min) ofempty pockets
sealed with tape(20 pockets min.)
STARTEND
Cathode Side
Anode Side(denoted by + and circle)
2.5 ±.1
1.5 ±.1
8.0 ±.1
4.0 ±.1
1.75 ±.10
12.0 .0+.3
13mm7"
Cover Tape
Pocket Tape
User Feed Direction
User Feed Direction
Loaded Pockets(2,000 Lamps) Leader
400 mm (min) ofempty pockets with
at least 100 mmsealed by tape
(50 empty pockets min.)
Trailer160 mm (min) ofempty pockets
sealed with tape(20 pockets min.)
STARTEND
Cathode Side
Anode Side(denoted by + and circle)
2.5 ±.1
1.5 ±.1
8.0 ±.1
4.0 ±.1
1.75 ±.10
12.0 .0+.3
13mm7"
Cover Tape
Pocket Tape
User Feed Direction
User Feed Direction
Copyright © 2016-2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree® and XLamp® are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC.
18
XLamp® XQ-a LED
PACkAGinG
The diagrams below show the packaging and labels Cree uses to ship XLamp XQ-A LeDs. XLamp XQ-A LeDs are shipped in tape loaded
on a reel. each box contains only one reel in a moisture barrier bag.
Patent Label(on bottom of box)
Label with Cree Bin Code, Quantity, Reel ID
Label with Cree Bin Code, Quantity, Reel ID
Label with Cree Order Code, Quantity, Reel ID, PO #
Label with Cree Order Code, Quantity, Reel ID, PO #
Label with Cree Bin Code, Quantity, Reel ID
Unpackaged Reel
Packaged Reel
Boxed Reel
CREE Bin Code& Barcode Label
Vacuum-SealedMoisture Barrier Bag
Label with CustomerP/N, Qty, Lot #, PO #
Label with Cree Bin Code, Qty, Lot #
Label with Cree Bin Code, Qty, Lot #
Vacuum-Sealed Moisture Barrier Bag
Patent Label
Label with Customer Order Code, Qty, Reel ID, PO #