Upload
vandien
View
230
Download
2
Embed Size (px)
Citation preview
The following includes samples information that AltaLink suggests that youUse Application or Proximity Notification. Theseand notifications. AltaLink may require additionalprocess if necessary.
Type of Work
Underground pipeline crossing
Above ground pipeline crossing
Underground cable crossing
Above ground cable crossing
Road crossing
Underground power line crossing
Aboveground power line crossing
Fence crossing
Pathway crossing
Any other crossing
Pumping station/metering station/riser siteencroachment
Power line proximity
Well site proximity
Pipeline/cable proximity
Any road proximity
Log deck proximity
Traffic light/signal proximity
Riser site/metering station proximity
Building/house proximity
Traffic light/signal encroachment
Temporary workspace proximity
Road widening
Any other proximity
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
information that AltaLink suggests that you include as part of your ROWUse Application or Proximity Notification. These samples were gathered based on previous application
AltaLink may require additional information, and will follow-up during the review
Suggested Sections
A, B
A, B, C
A, B
A, B, C
A, B
A, B
A, B, D
A, B, C
A, B
A, B
station/riser siteB, C
D
E
F, G (required if AltaLink’s minimum
requirements are not fulfilled)
H
I
J, K
site/metering station proximity L
M, N (required if house is proposed
within AltaLink’s power line setback box)
J, K
O
P
Plan
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
as part of your ROWwere gathered based on previous applications
up during the review
SECTION A
This section shows a sample crossing plan whichcrossing plan should have clear identification of proposed facility in relation to the location of theexisting AltaLink facility. We request thatand distances to the crossing location.
POWER POLE/TOWER (1) TAG# (e.g.904L76)POWER POLE/TOWER (1) DIRECTION:POWER POLE/TOWER (2) TAG# (e.g.904L76)POWER POLE/TOWER (2) DIRECTION: East/West/North/SouthDISTANCES FROM POWER POLE/TOWER TO EDGE OF
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
This section shows a sample crossing plan which should be submitted for each crossing request. Thecrossing plan should have clear identification of proposed facility in relation to the location of the
We request that the applicant provide tag numbers of AltaLinkcrossing location.
POWER POLE/TOWER (1) TAG# (e.g.904L76)POWER POLE/TOWER (1) DIRECTION: East/West/North/SouthPOWER POLE/TOWER (2) TAG# (e.g.904L76)POWER POLE/TOWER (2) DIRECTION: East/West/North/South
POLE/TOWER TO EDGE OF PROPOSED RIGHT OF WAY:
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
submitted for each crossing request. Thecrossing plan should have clear identification of proposed facility in relation to the location of the
AltaLink’s power pole
metres
NOTE:- A minimum separation of 5 metresdisturbance.- A minimum separation of 10 metresdisturbance.
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
metres is required between all AltaLink's power poles, anchors and any soil
metres is required between all AltaLink's towers, anchors and any soil
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
's power poles, anchors and any soil
's towers, anchors and any soil
SECTION B
This section shows a sample survey data sheet whichBlank copies of survey data sheets are available
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
This section shows a sample survey data sheet which we suggest to submit with each crossing request.Blank copies of survey data sheets are available at www.AltaLink.ca/right-of-way.
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
with each crossing request.
SECTION C
This section is required when an above ground facility is proposed.
Please provide the following information:
Description on above ground facility
o What is it?
o How it will be installed above ground?
o What it is made of?
Will any ground elevation change be required?
Distance from existing ground to highest point of proposed facility:
Height of above ground facility:
Is the facility permanent/temporary?
Drawings of proposed facility
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
an above ground facility is proposed.
Please provide the following information:
Description on above ground facility:
How it will be installed above ground?
What it is made of?
Will any ground elevation change be required?
Distance from existing ground to highest point of proposed facility: metres
Height of above ground facility: metres (if applicable)
permanent/temporary?
Drawings of proposed facility
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
metres (if applicable)
SECTION D
This section is required when an above ground power line facility is proposed.
Please provide the following information:
Voltages of upcoming power line:
Upcoming power line conductor type:
Ruling span of upcoming power line:
Span length of crossing span (distance from first power pole to second power pole):
metres
Number of insulators:
Distance between AltaLink’s power pole and closest phase of upcoming
metres
Permanent/temporary :
AEUC and CSA clearance requirement between two circuits at crossing location:
Calculated clearance between line of sight of upcoming power line and lowest wire of
power line sagging at 100⁰C
Drawings of power pole that will be located on either side of
Ground elevation change occurring at crossing location?
If answered “yes” to above question then specify following details:
Cut: metres
Fill: metres
Height/distance from existing ground to upcoming power line’s line of sight at crossing location:
metres
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
This section is required when an above ground power line facility is proposed.
Please provide the following information:
Voltages of upcoming power line: kV
conductor type:
Ruling span of upcoming power line: metres
Span length of crossing span (distance from first power pole to second power pole):
’s power pole and closest phase of upcoming power line:
AEUC and CSA clearance requirement between two circuits at crossing location:
Calculated clearance between line of sight of upcoming power line and lowest wire of
⁰C at crossing location: metres (if available)
Drawings of power pole that will be located on either side of AltaLink power line
Ground elevation change occurring at crossing location?
If answered “yes” to above question then specify following details:
metres
metres
Height/distance from existing ground to upcoming power line’s line of sight at crossing location:
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
Span length of crossing span (distance from first power pole to second power pole):
power line:
AEUC and CSA clearance requirement between two circuits at crossing location: metres
Calculated clearance between line of sight of upcoming power line and lowest wire of AltaLink’s
power line
Height/distance from existing ground to upcoming power line’s line of sight at crossing location:
SECTION E
This section shows a sample well site plan whichplan should show distances between
Please provide the following information on the drawing:
1) The distance between AltaLink’s closest right of way
2) The distance between AltaLink’s closest power line (wire) and well
3) The distance between AltaLink’s closest
4) The distance between AltaLink’s clo
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
This section shows a sample well site plan which is required for each well site proximity request. Thisplan should show distances between AltaLink’s power lines and well site as shown in the plan below.
Please provide the following information on the drawing:
’s closest right of way boundary and wellsite:
’s closest power line (wire) and wellsite: metres
’s closest right of way boundary and wellhead:
’s closest power line (wire) and wellhead: metr
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
for each well site proximity request. This’s power lines and well site as shown in the plan below.
metres
metres
metres
metres
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
*Courtesy of Boundary Technical*Courtesy of Boundary Technical Group Inc.
SECTION F
This section shows a sample plan of a pipeline proximity request, which iscable proximity request.
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
This section shows a sample plan of a pipeline proximity request, which is suggested for each pipeline or
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
for each pipeline or
SECTION G
This section details AltaLink requirements for pipelines or other excavations which are paralleling anAltaLink power line. This type of drawing is required when the following separation requirements arenot fulfilled:
5 metres of distance between any s
10 metres of distance between any soil disturbance and steel tower
The details in this section must reflect the smallest separation between the power pole/tower and theedge of trench and the steepest slope of trench to allow for an accurate assessment of the proposedfacility’s effect on the AltaLink line.
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
requirements for pipelines or other excavations which are paralleling anpower line. This type of drawing is required when the following separation requirements are
between any soil disturbance and wood pole;
between any soil disturbance and steel tower.
The details in this section must reflect the smallest separation between the power pole/tower and thed the steepest slope of trench to allow for an accurate assessment of the proposed
ink line.
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
requirements for pipelines or other excavations which are paralleling anpower line. This type of drawing is required when the following separation requirements are
The details in this section must reflect the smallest separation between the power pole/tower and thed the steepest slope of trench to allow for an accurate assessment of the proposed
X1: metres
X2: metres
Y1: metres
Y2: metres
Z (Ratio):
Type of pipeline:
Method of pipeline installation:
Pipeline material:
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
Engineer stamp
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
Engineer stamp
SECTION H
This section shows a sample plan which is
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
This section shows a sample plan which is suggested for each road proximity request.
*Courtesy of Boundary Technical Group Inc.
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
*Courtesy of Boundary Technical Group Inc.
SECTION I
This section shows a sample plan which is
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
This section shows a sample plan which is suggested for each log deck proximity request.
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
each log deck proximity request.
SECTION J
This section shows a sample plan which isencroachment request. On this plan the distance between each light/traffic signal and power linebe shown clearly. If the lights or traffic signals have devit arms, the distancenearest edge of light pole/traffic signal to the power line and the power line itself.
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
This section shows a sample plan which is suggested for each traffic signal/light pole proximity and/orencroachment request. On this plan the distance between each light/traffic signal and power linebe shown clearly. If the lights or traffic signals have devit arms, the distance should be shown betweennearest edge of light pole/traffic signal to the power line and the power line itself.
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
for each traffic signal/light pole proximity and/orencroachment request. On this plan the distance between each light/traffic signal and power line should
be shown between
SECTION K
This section shows a sample specification drawing which isthat is being used in the proposed project. This type of drawingsignal/light encroachment and/or proximity
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
This section shows a sample specification drawing which is suggested for each type of light/traffic signalproposed project. This type of drawing should be submitted with traffic
encroachment and/or proximity.
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
for each type of light/traffic signalbe submitted with traffic
SECTION L
This section shows a sample plan of which isproximity notification.
The distance between the edge of thesite/pumping station/metering station:
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
This section shows a sample plan of which is suggested for each pipeline riser site/metering site
The distance between the edge of the AltaLink right of way/VCE/LOC/EZE and closest edge of risersite/pumping station/metering station: metres
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
each pipeline riser site/metering site
right of way/VCE/LOC/EZE and closest edge of riser
SECTION M
This section shows a sample plan for houses proposed in proximity toof plan is suggested for each house proximity
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
This section shows a sample plan for houses proposed in proximity to AltaLink’s right of way. This typeeach house proximity notification.
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
’s right of way. This type
SECTION N
If a house is proposed within the horizontal setback distanceshould be submitted with the notificationfacilities to be located in the lot.
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
If a house is proposed within the horizontal setback distance AltaLink provided, then this type of plannotification. This plan should detail the house’s maximum height, and
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
provided, then this type of plan. This plan should detail the house’s maximum height, and all
SECTION O
This section shows a sample plan which isnotification.
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
This section shows a sample plan which is suggested for each temporary workspace proximity
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
for each temporary workspace proximity
SECTION P
This section shows a sample plan which is suggestedutilities clearly and any extra right of way that is purchased for road widening (if applicable).
CROSSINGS, ENCROACHMENTS & PROXIMITIESSAMPLE INFORMATION GUIDE
suggested for each road widening request in proximity to AltaLink lines. This plan should show allutilities clearly and any extra right of way that is purchased for road widening (if applicable).
lines. This plan should show all