A PRODUCT OF K.N. CROWDER MFG. INC. TOLL-FREE PHONE: 1-866-999-1KNC (1562) ● TOLL-FREE FAX: 1-800-567-0123 ● WEBSITE: www.kncrowder.com ● EMAIL: customerservice@kncrowder.com

© 2014 K.N. CROWDER MFG. INC. All Rights Reserved. 2

Introducing

Crowdertrack’s revolutionary technology allows sliding doors to close and stay closed -- safely, securely and silently, all with the introduction of the Catch‘N’CloseTM closing system --

Bouncing and slamming is no longer an issue for Crowdertrack’s sliding doors as the Catch’N’Close technology allows for smooth and controlled opening and closing of the door. The door will automatically slow and shut itself for

the final few inches as the door travels to the open/closed position. No more jamming fingers or slamming doors.

“Safety is a top concern at Crowder. The Catch’N’Close closing system allows the door to safely and securely close,” said Jeremy Crowder, Vice President K.N. Crowder.

THE BENEFITS:Silent close

If noise reduction and privacy is a priority, the Catch’N’Close closing system is ideal. Long-term care facilities, hotels, hospitals, offices, conference rooms, bedrooms and

bathrooms are just a few spaces that can benefit from this new technology.

SafetyThe Catch’N’Close closing system eliminates accidental closure of the door on users’ fingers.

Residential and commercial facilities who are catering to small children, the elderly, or individuals who require additional care are perfect candidates for the system.

Ease of useThe Catch’N’Close closing system is extremely user friendly as the door gently glides into the open/closed position without user assistance. The user is no longer responsible for ensuring that the door is either in the

fully open or closed position as the Catch’N’Close mechanism does it for them.

The TechnologyK.N. Crowder is the first to use the gas spring technology to create a top of the line door closing system.

The closing system can be installed on both the opening and closing ends of doors up to 300 lbs. or as narrow as 18 inches wide. It has been cycle tested for up to 50,000 cycles without fail.

The Catch’N’Close closing system has the unique ability to safeguard the door and hardware from wear and tear. The system eliminates slamming; protecting the user, the door and the door frame.

InstallationThe installation is easy as the Catch’N’Close closing system is hidden inside the Crowdertrack and requires

no additional installation efforts. The product can be used on top/side mounted doors, pocket doors, single and bi-parting doors and some barn door applications. In the event there is any issue, or customers want to replace the closing device with a new one, there is no need to take apart the door or wall as the new closing system can

easily be accessed or installed/removed from underneath the track.

“Our customers have always wanted quality, highly functional products that look great! The Catch’N’Close closing system fits nicely into our collection of quality sliding door hardware”,

said Jeremy Crowder, Vice President K.N. Crowder.

6565K.N. Crowder Mfg. Inc.1220 Burloak DriveBurlington, Ontario, CanadaL7L 6B3

K.N. Crowder Inc.210 Eighth Street SouthLewiston, New York14092

®

Architecture &

Design

Collection

A PRODUCT OF K.N. CROWDER MFG. INC. TOLL-FREE PHONE: 1-866-999-1KNC (1562) ● TOLL-FREE FAX: 1-800-567-0123 ● WEBSITE: www.kncrowder.com ● EMAIL: customerservice@kncrowder.com

© 2014 K.N. CROWDER MFG. INC. All Rights Reserved. G1

MEDIUM TO HEAVY-DUTY TOP MOUNT SYSTEMS FOR FRAMELESS GLASS DOORS

1 3/4 in[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR 2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

* *

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm]1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

* *GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

* *

* HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

* *

CCGH HANGER WITH CC-904 TRACK DETAIL

CCGH Glass HangerWith CC-904 Top Mount Track

1 - CC-904 Top Mount Track X Length (2 x Door Width) (Example: 36” [914mm] Door = 72” [1829mm] Track)

OPTIONAL PRODUCTSCCGH-038Cor012C Continuous Glass Catch’N’Close Hangers are available for doors up to 96” [2438 mm] wide and up to 300lbs each. For other Glass Door Guides and Continuous Guide systems, please see the standard Glass Hangers & Guide Systems product line on the website.

2 3/8 in[60.3 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]1 3/4 in

[44.1 mm]

1 in[25.4 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

2 11/16 in[67.9 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]

2 3/8 in[60.3 mm]

CC-902 SIDE MOUNTBRACKETS ARESUPPLIED WITH OBLONG HOLES.

HOLES IN CC-904TRACK BY INSTALLER.

DETAIL AFASTENING DETAIL FOR TRACK & SIDE MOUNT BRACKET.

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

2 11/16 in[67.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSEDINTO DOOR

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

3 in[75.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

DETAIL

A

**

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR3 in

[75.8 mm]

1 in[25.4 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

DETAIL

A

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

Jusqu’à136kg

par porte

Jusqu’à91kg

par porte

TESTÉ

SUR

50,000 CYCLES

PRO

BADO

50,000 CICLOS

Hasta 300lb

por puerta

Hasta 200lb

por puerta

2 3/8 in[60.3 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]1 3/4 in

[44.1 mm]

1 in[25.4 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

2 11/16 in[67.9 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]

2 3/8 in[60.3 mm]

CC-902 SIDE MOUNTBRACKETS ARESUPPLIED WITH OBLONG HOLES.

HOLES IN CC-904TRACK BY INSTALLER.

DETAIL AFASTENING DETAIL FOR TRACK & SIDE MOUNT BRACKET.

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

2 11/16 in[67.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSEDINTO DOOR

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

3 in[75.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

DETAIL

A

**

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR3 in

[75.8 mm]

1 in[25.4 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

DETAIL

A

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

CC-904

2 3/8 in[60.3 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]1 3/4 in

[44.1 mm]

1 in[25.4 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

2 11/16 in[67.9 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]

2 3/8 in[60.3 mm]

CC-902 SIDE MOUNTBRACKETS ARESUPPLIED WITH OBLONG HOLES.

HOLES IN CC-904TRACK BY INSTALLER.

DETAIL AFASTENING DETAIL FOR TRACK & SIDE MOUNT BRACKET.

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

2 11/16 in[67.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSEDINTO DOOR

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

3 in[75.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

DETAIL

A

**

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR3 in

[75.8 mm]

1 in[25.4 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

DETAIL

A

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

FOR:

CC-942 End Cap only(For use with CC-904 Track & one (1)

CC-940 Fascia combination only)

FOR:

CC-941 End Cap only(For use with CC-904 Track only)

FOR:

CC-943 End Cap only(For use with CC-904 Track & two (2)

CC-940 Fascia combination only)

4 1/4 in[108.0 mm]

2 11/16 in[67.9 mm]

3/4 in[19.1 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

3 1/2 in[88.9 mm] 1 in

[25.4 mm]

CC-X CATCH’N’CLOSECC-101HDIN-TRACKSTOP

*

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

4 1/4 in[108.0 mm]

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

*

SEE LEFT

3 in[76.2 mm]

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

3 19/32 in[91.0 mm]

*

3 in[76.2 mm]

SEE LEFT

3 19/32 in[91.0 mm]

2 11/16 in[68.3 mm]

5 1/4 in[133.3 mm]

*

4 1/4 in[108.0 mm]

2 11/16 in[67.9 mm]

3/4 in[19.1 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

3 1/2 in[88.9 mm] 1 in

[25.4 mm]

CC-X CATCH’N’CLOSECC-101HDIN-TRACKSTOP

*

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

4 1/4 in[108.0 mm]

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

*

SEE LEFT

3 in[76.2 mm]

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

3 19/32 in[91.0 mm]

*

3 in[76.2 mm]

SEE LEFT

3 19/32 in[91.0 mm]

2 11/16 in[68.3 mm]

5 1/4 in[133.3 mm]

*

TYPICAL LIST OF PRODUCTS REQUIRED FOR A STANDARD GLASS DOOR USING THE CATCH’N’CLOSE TECHNOLOGY:

2 - CCGH-038or012 Glass Catch’N’Close Hangers(Complete with bolts, covers and end caps. Note: Specify glass thickness 3/8” [10 mm] or 1/2” [12 mm] when ordering.)

2 - CC-101HD Catch’N’Close In-track Stops(Complete with set screws for friction fit)

2 - CC-2 or CC-3 Catch’N’Close closing device(Complete with screws. See above for weight capacity)

1 3/4 in[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR 2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

* *

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm]1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

* *GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

* *

* HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

* *

[Optional CC-940 Snap-On Fascia illustrated as solid black profile. Can be used on both sides of the track or one side only]

Jusqu’à136kg

par porte

Jusqu’à91kg

par porte

TESTÉ

SUR

50,000 CYCLES

PRO

BADO

50,000 CICLOS

Hasta 300lb

por puerta

Hasta 200lb

por puerta

For Single or Bi-Parting, By-Passing, Pocket or Wall Mounted Doors.Using the popular design from the standard CGH Glass Hangers, our well-known precision ball bearing nylon tire wheels, and adding Catch’N’Close technology, results in the ultimate sliding glass door system! The CCGH Hangers are made for 3/8” [10 mm] or 1/2” [12 mm] glass. Hardware is concealed by our unique snap-on covers which can be supplied in different finishes. The snap-on covers allow for minimal clearance of 1/8” [3.2 mm] between the bottom of the track and the top of the hanger. Using the new CC-904 Track, combined with the CC-940 Fascia, results in significant savings by eliminating the need for constructing a bulkhead to hide the track & hardware.

● CCGH-038 Hanger for 3/8” [10 mm] thick glass● CCGH-012 Hanger for 1/2” [12 mm] thick glass● Load Capacity up to 300 lbs. (two hangers)● Use with Extruded Aluminum CC-904 Track, 6061T6 Alloy● Use with CC-2 Catch’N’Close closing device for up to 200lbs. doors● Use with CC-3 Catch’N’Close closing device for up to 300lbs. doors

Jusqu’à136kg

par porte

Jusqu’à91kg

par porte

TESTÉ

SUR

50,000 CYCLES

PRO

BADO

50,000 CICLOS

Hasta 300lb

por puerta

Hasta 200lb

por puerta

1 3/4 in[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR 2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

* *

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm]1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

* *GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

* *

* HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

* *

*Hole size in glass required: Ø11/16” [17.5 mm]1 3/4 in

[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR 2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

* *

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm]1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

* *GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

* *

* HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

* *

1 - CGGS-038or012 Stationary Glass Door Guide(Complete with screws)

1 3/4 in[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

**

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm] 1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

**GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

**

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

**

CC-940 Snap-OnFascia

®

Arc

hite

ctur

e &

Des

ign

C

olle

ctio

n

A PRODUCT OF K.N. CROWDER MFG. INC. TOLL-FREE PHONE: 1-866-999-1KNC (1562) ● TOLL-FREE FAX: 1-800-567-0123 ● WEBSITE: www.kncrowder.com ● EMAIL: customerservice@kncrowder.com

© 2014 K.N. CROWDER MFG. INC. All Rights Reserved. G2

MEDIUM TO HEAVY-DUTY BRACKET MOUNT SYSTEMS FOR FRAMELESS GLASS DOORS

1 3/4 in[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR 2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

* *

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm]1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

* *GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

* *

* HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

* *

CCGH HANGER WITH CC-904 TRACK DETAIL

CCGH Glass HangerWith CC-902 Side Mount Bracket & CC-904 Top Mount Track

1 - CC-904 Top Mount Track X Length (2 x Door Width) (Example: 36” [914mm] Door = 72” [1829mm] Track)

OPTIONAL PRODUCTSCCGH-038Cor012C Continuous Glass Catch’N’Close Hangers are available for doors up to 96” [2438 mm] wide and up to 300lbs each. For other Glass Door Guides and Continuous Guide systems, please see the standard Glass Hangers & Guide Systems product line on the website.

2 3/8 in[60.3 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]1 3/4 in

[44.1 mm]

1 in[25.4 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

2 11/16 in[67.9 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]

2 3/8 in[60.3 mm]

CC-902 SIDE MOUNTBRACKETS ARESUPPLIED WITH OBLONG HOLES.

HOLES IN CC-904TRACK BY INSTALLER.

DETAIL AFASTENING DETAIL FOR TRACK & SIDE MOUNT BRACKET.

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

2 11/16 in[67.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSEDINTO DOOR

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

3 in[75.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

DETAIL

A

**

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR3 in

[75.8 mm]

1 in[25.4 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

DETAIL

A

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

Jusqu’à136kg

par porte

Jusqu’à91kg

par porte

TESTÉ

SUR

50,000 CYCLES

PRO

BADO

50,000 CICLOS

Hasta 300lb

por puerta

Hasta 200lb

por puerta

4 1/4 in[108.0 mm]

2 11/16 in[67.9 mm]

3/4 in[19.1 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

3 1/2 in[88.9 mm] 1 in

[25.4 mm]

CC-X CATCH’N’CLOSECC-101HDIN-TRACKSTOP

*

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

4 1/4 in[108.0 mm]

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

*

SEE LEFT

3 in[76.2 mm]

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

3 19/32 in[91.0 mm]

*

3 in[76.2 mm]

SEE LEFT

3 19/32 in[91.0 mm]

2 11/16 in[68.3 mm]

5 1/4 in[133.3 mm]

*

4 1/4 in[108.0 mm]

2 11/16 in[67.9 mm]

3/4 in[19.1 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

3 1/2 in[88.9 mm] 1 in

[25.4 mm]

CC-X CATCH’N’CLOSECC-101HDIN-TRACKSTOP

*

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

4 1/4 in[108.0 mm]

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

*

SEE LEFT

3 in[76.2 mm]

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

3 19/32 in[91.0 mm]

*

3 in[76.2 mm]

SEE LEFT

3 19/32 in[91.0 mm]

2 11/16 in[68.3 mm]

5 1/4 in[133.3 mm]

*

TYPICAL LIST OF PRODUCTS REQUIRED FOR A STANDARD GLASS DOOR USING THE CATCH’N’CLOSE TECHNOLOGY:

2 - CCGH-038or012 Glass Catch’N’Close Hangers(Complete with bolts, covers and end caps. Note: Specify glass thickness 3/8” [10 mm] or 1/2” [12 mm] when ordering.)

2 - CC-101HD Catch’N’Close In-track Stops(Complete with set screws for friction fit)

2 - CC-2 or CC-3 Catch’N’Close closing device(Complete with screws. See above for weight capacity)

1 3/4 in[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR 2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

* *

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm]1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

* *GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

* *

* HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

* *

Jusqu’à136kg

par porte

Jusqu’à91kg

par porte

TESTÉ

SUR

50,000 CYCLES

PRO

BADO

50,000 CICLOS

Hasta 300lb

por puerta

Hasta 200lb

por puerta

For Single or Bi-Parting Wall Mounted Doors.Using the popular design from the standard CGH Glass Hangers, our well-known precision ball bearing nylon tire wheels, and adding Catch’N’Close technology, results in the ultimate sliding glass door system! The CCGH Hangers are made for 3/8” [10 mm] or 1/2” [12 mm] glass. Hardware is concealed by our unique snap-on covers which can be supplied in different finishes. The snap-on covers allow for minimal clearance of 1/8” [3.2 mm] between the bottom of the track and the top of the hanger. Using the new CC-904 Track, combined with the CC-902 Side Mount Bracket & CC-902 Fascia, results in significant savings by eliminating the need for constructing a bulkhead to hide the track & hardware.

● CCGH-038 Hanger for 3/8” [10 mm] thick glass● CCGH-012 Hanger for 1/2” [12 mm] thick glass● Load Capacity up to 300 lbs. (two hangers)● Use with Extruded Aluminum CC-904 Track, 6061T6 Alloy● Use with Extruded Aluminum CC-902 Bracket, 6061T6 Alloy● Use with CC-2 Catch’N’Close closing device for up to 200lbs. doors● Use with CC-3 Catch’N’Close closing device for up to 300lbs. doors

Jusqu’à136kg

par porte

Jusqu’à91kg

par porte

TESTÉ

SUR

50,000 CYCLES

PRO

BADO

50,000 CICLOS

Hasta 300lb

por puerta

Hasta 200lb

por puerta

*Hole size in glass required: Ø11/16” [17.5 mm]

1 3/4 in[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR 2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

* *

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm]1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

* *GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

* *

* HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

* *

1 - CGGS-038or012 Stationary Glass Door Guide(Complete with screws)

1 3/4 in[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

**

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm] 1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

**GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

**

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

**

2 3/8 in[60.3 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]1 3/4 in

[44.1 mm]

1 in[25.4 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

2 11/16 in[67.9 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]

2 3/8 in[60.3 mm]

CC-902 SIDE MOUNTBRACKETS ARESUPPLIED WITH OBLONG HOLES.

HOLES IN CC-904TRACK BY INSTALLER.

DETAIL AFASTENING DETAIL FOR TRACK & SIDE MOUNT BRACKET.

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

2 11/16 in[67.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSEDINTO DOOR

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

3 in[75.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

DETAIL

A

**

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR3 in

[75.8 mm]

1 in[25.4 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

DETAIL

A

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

[CC-902 Side Mount Bracket illustrated as solid blue profile. Supplied in continuous lengths.] [*Indicates mounting locations to the wall support on CC-902 Side Mount Bracket. Optional CC-920 Snap-On Fascia illustrated as solid black profile]

2 3/8 in[60.3 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]1 3/4 in

[44.1 mm]

1 in[25.4 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

2 11/16 in[67.9 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]

2 3/8 in[60.3 mm]

CC-902 SIDE MOUNTBRACKETS ARESUPPLIED WITH OBLONG HOLES.

HOLES IN CC-904TRACK BY INSTALLER.

DETAIL AFASTENING DETAIL FOR TRACK & SIDE MOUNT BRACKET.

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

2 11/16 in[67.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSEDINTO DOOR

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

3 in[75.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

DETAIL

A

**

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR3 in

[75.8 mm]

1 in[25.4 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

DETAIL

A

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

CC-904& CC-902

2 3/8 in[60.3 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]1 3/4 in

[44.1 mm]

1 in[25.4 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

2 11/16 in[67.9 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]

2 3/8 in[60.3 mm]

CC-902 SIDE MOUNTBRACKETS ARESUPPLIED WITH OBLONG HOLES.

HOLES IN CC-904TRACK BY INSTALLER.

DETAIL AFASTENING DETAIL FOR TRACK & SIDE MOUNT BRACKET.

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

2 11/16 in[67.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSEDINTO DOOR

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

3 in[75.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

DETAIL

A

**

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR3 in

[75.8 mm]

1 in[25.4 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

DETAIL

A

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 3/8 in[60.3 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]1 3/4 in

[44.1 mm]

1 in[25.4 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

2 11/16 in[67.9 mm]

4 5/16 in[109.6 mm]

3 in[76.2 mm]

2 3/8 in[60.3 mm]

CC-902 SIDE MOUNTBRACKETS ARESUPPLIED WITH OBLONG HOLES.

HOLES IN CC-904TRACK BY INSTALLER.

DETAIL AFASTENING DETAIL FOR TRACK & SIDE MOUNT BRACKET.

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

3 in[76.2 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

3 5/32 in[80.3 mm]

SEE LEFT

**

2 11/16 in[67.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSEDINTO DOOR

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

3 in[75.9 mm]

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

4 1/4 in[108.0 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

DETAIL

A

**

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR3 in

[75.8 mm]

1 in[25.4 mm]

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

4 1/4 in[108.0 mm]

3 1/2 in[88.9 mm]

DETAIL

A

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

CC-920Snap-OnFascia

1 - CC-902 Side Mount Bracket X Length (same as Track) (Example: 72” [1829mm] Track = 72” [1829mm] Bracket. Complete with punched oblong holes for securing track with tab nuts & machine screws supplied for each hole.)

FOR:

CC-922 End Cap only(For use with CC-904 Track, CC-902

Bracket & CC-920 Fascia combination only)

FOR:

CC-921 End Cap only(For use with CC-904 Track &

CC-902 Bracket combination only)

2 - CC-921 End Caps (Complete with screws)

1 3/4 in[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR 2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

* *

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm]1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

* *GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

* *

* HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

* *

®

Architecture &

Design

Collection

A PRODUCT OF K.N. CROWDER MFG. INC. TOLL-FREE PHONE: 1-866-999-1KNC (1562) ● TOLL-FREE FAX: 1-800-567-0123 ● WEBSITE: www.kncrowder.com ● EMAIL: customerservice@kncrowder.com

© 2014 K.N. CROWDER MFG. INC. All Rights Reserved. G3

MEDIUM TO HEAVY-DUTY SIDE MOUNT SYSTEMS FOR FRAMELESS GLASS DOORS

4 1/4 in[108.0 mm]

2 11/16 in[67.9 mm]

3/4 in[19.1 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

3 1/2 in[88.9 mm] 1 in

[25.4 mm]

CC-X CATCH’N’CLOSECC-101HDIN-TRACKSTOP

*

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

4 1/4 in[108.0 mm]

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

*

SEE LEFT

3 in[76.2 mm]

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

3 19/32 in[91.0 mm]

*

3 in[76.2 mm]

SEE LEFT

3 19/32 in[91.0 mm]

2 11/16 in[68.3 mm]

5 1/4 in[133.3 mm]

*

1 - CC-908 Side Mount Track X Length (2 x Door Width) (Example: 36” [914mm] Door = 72” [1829mm] Track)

[*Indicates mounting flange on CC-908 Track][Optional CC-980 Snap-On Fascia illustrated as solid black profile]

4 1/4 in[108.0 mm]

2 11/16 in[67.9 mm]

3/4 in[19.1 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

3 1/2 in[88.9 mm] 1 in

[25.4 mm]

CC-X CATCH’N’CLOSECC-101HDIN-TRACKSTOP

*

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

4 1/4 in[108.0 mm]

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

*

SEE LEFT

3 in[76.2 mm]

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

3 19/32 in[91.0 mm]

*

3 in[76.2 mm]

SEE LEFT

3 19/32 in[91.0 mm]

2 11/16 in[68.3 mm]

5 1/4 in[133.3 mm]

*

CC-980 Snap-On Fascia

FOR:

CC-981 End Cap only(For use with CC-908 Track only)

FOR:

CC-982 End Cap only(For use with CC-908 Track &

CC-980 Fascia combination only)

4 1/4 in[108.0 mm]

2 11/16 in[67.9 mm]

3/4 in[19.1 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

3 1/2 in[88.9 mm] 1 in

[25.4 mm]

CC-X CATCH’N’CLOSECC-101HDIN-TRACKSTOP

*

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

4 1/4 in[108.0 mm]

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

*

SEE LEFT

3 in[76.2 mm]

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

3 19/32 in[91.0 mm]

*

3 in[76.2 mm]

SEE LEFT

3 19/32 in[91.0 mm]

2 11/16 in[68.3 mm]

5 1/4 in[133.3 mm]

*

CC-908

1 3/4 in[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR 2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

* *

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm]1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

* *GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

* *

* HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

* *

CCGH HANGER WITH CC-904 TRACK DETAIL

CCGH Glass HangerWith CC-908 Side Mount Track

OPTIONAL PRODUCTSCCGH-038Cor012C Continuous Glass Catch’N’Close Hangers are available for doors up to 96” [2438 mm] wide and up to 300lbs each. For other Glass Door Guides and Continuous Guide systems, please see the standard Glass Hangers & Guide Systems product line on the website.

Jusqu’à136kg

par porte

Jusqu’à91kg

par porte

TESTÉ

SUR

50,000 CYCLES

PRO

BADO

50,000 CICLOS

Hasta 300lb

por puerta

Hasta 200lb

por puerta

4 1/4 in[108.0 mm]

2 11/16 in[67.9 mm]

3/4 in[19.1 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

3 1/2 in[88.9 mm] 1 in

[25.4 mm]

CC-X CATCH’N’CLOSECC-101HDIN-TRACKSTOP

*

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

4 1/4 in[108.0 mm]

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

*

SEE LEFT

3 in[76.2 mm]

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

3 19/32 in[91.0 mm]

*

3 in[76.2 mm]

SEE LEFT

3 19/32 in[91.0 mm]

2 11/16 in[68.3 mm]

5 1/4 in[133.3 mm]

*

4 1/4 in[108.0 mm]

2 11/16 in[67.9 mm]

3/4 in[19.1 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

HANGER ADJUSTMENTMIN 1 in [25.4 mm]

MAX 1 1/2 in [38.1 mm]

3 1/2 in[88.9 mm] 1 in

[25.4 mm]

CC-X CATCH’N’CLOSECC-101HDIN-TRACKSTOP

*

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

2 3/8 in[60.1 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

1 1/8 in[28.6 mm]

RECESSED INTO DOOR

1 3/8 in[34.9 mm]

RECESSED INTO DOOR

HANGER ADJUSTMENT

MIN 3/16 in [4.8 mm]

MAX 9/16 in [14.3 mm]

10 in[254.0 mm]

RECESSED INTO DOOR

4 1/4 in[108.0 mm]

CC-101HDIN-TRACK STOP

CC-X CATCH’N’CLOSE

*

SEE LEFT

3 in[76.2 mm]

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

3 19/32 in[91.0 mm]

*

3 in[76.2 mm]

SEE LEFT

3 19/32 in[91.0 mm]

2 11/16 in[68.3 mm]

5 1/4 in[133.3 mm]

*

TYPICAL LIST OF PRODUCTS REQUIRED FOR A STANDARD GLASS DOOR USING THE CATCH’N’CLOSE TECHNOLOGY:

2 - CCGH-038or012 Glass Catch’N’Close Hangers(Complete with bolts, covers and end caps. Note: Specify glass thickness 3/8” [10 mm] or 1/2” [12 mm] when ordering.)

2 - CC-101HD Catch’N’Close In-track Stops(Complete with set screws for friction fit)

2 - CC-2 or CC-3 Catch’N’Close closing device(Complete with screws. See above for weight capacity)

1 3/4 in[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR 2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

* *

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm]1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

* *GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

* *

* HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

* *

Jusqu’à136kg

par porte

Jusqu’à91kg

par porte

TESTÉ

SUR

50,000 CYCLES

PRO

BADO

50,000 CICLOS

Hasta 300lb

por puerta

Hasta 200lb

por puerta

For Single or Bi-Parting Wall Mounted Doors.Using the popular design from the standard CGH Glass Hangers, our well-known precision ball bearing nylon tire wheels, and adding Catch’N’Close technology, results in the ultimate sliding glass door system! The CCGH Hangers are made for 3/8” [10 mm] or 1/2” [12 mm] glass. Hardware is concealed by our unique snap-on covers which can be supplied in different finishes. The snap-on covers allow for minimal clearance of 1/8” [3.2 mm] between the bottom of the track and the top of the hanger. Using the new CC-908 Track, combined with the CC-980 Fascia, results in significant savings by eliminating the need for constructing a bulkhead to hide the track & hardware.

● CCGH-038 Hanger for 3/8” [10 mm] thick glass● CCGH-012 Hanger for 1/2” [12 mm] thick glass● Load Capacity up to 300 lbs. (two hangers)● Use with Extruded Aluminum CC-908 Track, 6061T6 Alloy● Use with CC-2 Catch’N’Close closing device for up to 200lbs. doors● Use with CC-3 Catch’N’Close closing device for up to 300lbs. doors

Jusqu’à136kg

par porte

Jusqu’à91kg

par porte

TESTÉ

SUR

50,000 CYCLES

PRO

BADO

50,000 CICLOS

Hasta 300lb

por puerta

Hasta 200lb

por puerta

*Hole size in glass required: Ø11/16” [17.5 mm]1 3/4 in

[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR 2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

* *

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm]1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

* *GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

* *

* HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

* *

1 - CGGS-038or012 Stationary Glass Door Guide(Complete with screws)

1 3/4 in[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

**

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm] 1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

**GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

**

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

**

1 3/4 in[44.5 mm]

7/8 in[22.2 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 3/4 in[44.5 mm]

1 1/4 in[31.8 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3 in[75.8 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

GLASS EDGE

4 1/4 in[108.0 mm]

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR 2 3/4 in[69.9 mm]

4 1/4 in[108.0 mm]

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

1 5/8 in[40.9 mm]FOR 10 mm (3/8") OR12 mm (1/2") GLASS

7/32 in[5.3 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 in[76.2 mm]

3 5/32 in[80.3 mm]

4 13/16 in[122.2 mm]

2 11/16 in[68.3 mm]

SEE LEFT

* *

*HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

DETAIL

A

**

**

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

2 11/16 in[67.9 mm]

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

1 3/4 in[44.1 mm]

4 1/4 in[108.0 mm]

4 1/4 in[108.0 mm]

1 5/8 in[40.9 mm]

2 1/16 in[52.6 mm]

3 5/16 in[84.3 mm]

3 in[76.2 mm]

4 5/16 in[109.6 mm]

2 3/8 in[60.3 mm]

3/16 in[5.1 mm]

OVERLAPOF FASCIAON GLASS

DOOR

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

2 3/4 in[69.9 mm]1 1/2 in

[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm] *

* *GLASS EDGE

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACK STOP

HANGER ADJUSTMENTMIN 1/8 in [3.2 mm]

MAX 1/2 in [12.7 mm]

3/4 in[19.1 mm]

2 11/16 in[67.9 mm]

1 1/2 in[38.1 mm]DISTANCEFROM WALLTO CENTEROF DOOR

2 3/8 in[60.1 mm]

4 1/4 in[108.0 mm]

3 in[76.2 mm]

3 19/32 in[91.0 mm]

SEE LEFT

5 1/4 in[133.3 mm]

2 11/16 in[68.3 mm]

7/32 in[5.7 mm]

OVERLAPOF FASCIAON GLASS

DOOR

3 5/16 in[84.3 mm]

2 1/16 in[52.6 mm]

1 5/8 in[40.9 mm]

FOR 10 mm (3/8") OR12 mm (1/2") GLASS

1 1/2 in[38.1 mm]

FROM TOPEDGE OF

GLASS DOOR2 3/4 in

[69.9 mm]4 1/4 in

[108.0 mm]

GLASS EDGE

MINIMUM DISTANCE FROM EDGE OF

GLASS DOORREQUIRED IS

3-5/8 in [92.1 mm]TO THE FIRST HOLE

ON HANGER

* *

* HOLE SIZE IN GLASS REQUIRED: Ø11/16" [17.5 mm]

CC-X CATCH’N’CLOSE

CC-101HDIN-TRACKSTOP

* *

®