CSQ SHORT COURSES PROGRAM

HOW DOES IT WORK?CSQ funding is paid directly to TAFE Queensland. Where CSQ funding doesn’t cover the full cost of your fees, you will be required to contribute towards the remaining course fees. Some courses are part of full qualifications. If you are interested in a course, contact us to find out more.

WHAT’S ON OFFER?Eligible participants can access a range of accredited and non-accredited short courses. A maximum of eight general construction and five civil construction short courses can be funded through this initiative.

ACCREDITED SHORT COURSESAn accredited short course or skill set will earn you official credits for the units you complete. These unit credits may be applied to a related qualification at a later date if you choose to study a full certificate or diploma. When you successfully complete your accredited unit/s you will earn a Statement of Attainment.

NON-ACCREDITED SHORT COURSESNon-accredited short courses are a great way to refresh your knowledge and increase your skills. Upon completion of a non-accredited short course a Certificate of Attendance can be provided.

ELIGIBILITYTo be eligible for funding, participants must be eligible existing workers or unemployed eligible workers (i.e. unemployed for four years or less) in the civil construction and building and construction industries who are one of the following:

> An Australian or New Zealand citizen

> A permanent resident of Australia

> A holder of a refugee or humanitarian visa

Participants must also permanently reside or be permanently employed in Queensland. Additional eligibility requirements may apply. Please speak with your TAFE Queensland representative.

Apprentices and trainees in the civil construction and building and construction industries are not eligible for this funding.

The Short Courses Program is an initiative of Construction Skills Queensland (CSQ). Eligibility criteria applies to all CSQ funded programs. For more information visit CSQ.org.au

As a recipient of funding, TAFE Queensland is proud to support Construction Skills Queensland (CSQ) and their ongoing financial and professional contribution to the Queensland building and construction industry.

The CSQ Short Courses Program provides funding for a range of competencies and skill sets for existing and unemployed workers in the civil construction and building and construction industries who are wanting to update or expand their skills and knowledge in specific areas.

PLACES ARE LIMITED. APPLY NOW

1800 654 447 | tafeqld.edu.au

RTO 0275 I CRICOS 03020E | Information is correct at time of printing December 2019

GENERAL CONSTRUCTION PROGRAM 19/20

AGAT Asbestos general awareness training (non-accredited)

BSBSMB401 Establish legal and risk management requirements of small business

CMBPDRV001 Revalidation course commission and maintain backflow prevention devices (non-accredited)

CPCCCM2010 Work safely on scaffolding higher than two metres

CPCCCM2010B Work safely at heights

CPCCDE3014A Remove non-friable asbestos

CPCCLDG3001A Licence to perform dogging

CPCCPD3031A Implement safe lead paint and asbestos work practices in the painting industry

WHITE CARD CPCCWHS1001 Prepare to work safely in the construction industry

CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry

CPCPCM4012A Estimate and cost work

CPCPDR4011B Design and size sanitary drainage systems

CPCPDR4012B Design and size stormwater drainage systems

CPCPFS4021A Commission domestic and residential fire suppression sprinkler systems

CPCPFS4024A Design residential and domestic fire sprinkler systems

CPCPGS4011C Design and size consumer gas installations

CPCPGS4022A Service Type A gas appliances

CPCPWT4011B Design and size heated and cold water services and systems

CPCPWT4022A Commission and maintain backflow prevention devices

CPCPWT4023A Commission and maintain hot and heated water temperature control devices

HLTAID003 Provide first aid

ICTCBL301 Install, terminate and certify structured cabling installation

ICTCBL302 Install and terminate optical fibre cable on customer premises

PMBWELD301 Butt weld polyethylene plastic pipelines

PMBWELD302 Electrofusion weld polyethylene pipelines

TLILIC0003 Licence to operate a forklift truck

UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace

UEENEEG122A Conduct compliance inspection of single phase LV electrical installations

UEENEEG123A Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase

UEENEEG175A Develop compliance policies and plans to conduct an electrical contracting business

UEENEEG197A Apply currency of safe working practices and compliance verification of electrical installations

UEENEEK125A Solve basic problems in photovoltaic energy apparatus and systems

UEENEEK135A Design grid connected photovoltaic power supply systems

SUBSIDISED COURSES UNDER THE SHORT COURSES PROGRAM

PLACES ARE LIMITED. APPLY NOW

1800 654 447 | tafeqld.edu.au

RTO 0275 I CRICOS 03020E | Information is correct at time of printing December 2019

*A maximum of three plant operation courses can be subsidised.

UEENEEK148A Install, configure and commission LV grid connected photovoltaic power systems

UEENEEP010A Disconnect - reconnect appliances connected to low voltage installation wiring

UEENEEP013A Disconnect - reconnect control devices connected to low voltage installation wiring

UEENEEP014A Disconnect - reconnect water heaters connected to low voltage installation wiring

UEENEEP016A Locate and rectify faults in low voltage appliances using set procedures

UEENEEP018A Locate and rectify faults in low voltage control devices using set procedures

UEENEEP019A Locate and rectify faults in low voltage water heaters using set procedures

UEENEEP024A Attach cords and plugs to electrical equipment for connection to single phase 230 Volt supply

UEENEEP025A Attach cords and cables and plugs to electrical equipment for connection to 1000 Va.c. or 1500 Vd.c. supply

UEENEEP026A Conduct in-service safety testing of electrical cord connected equipment and cord assemblies

UEERE4001 Install, maintain and fault find battery storage systems for grid-connected photovoltaic systems

UEERE5001 Design battery storage systems for grid-connected photovoltaic systems

UETTDRRF06B Perform rescue from a live LV panel

WHSQHSRNCB01 Health and Safety Representative (HSR) - WHSQ approved training course - Initial (5 days) (non-accredited)

CIVIL CONSTRUCTION PROGRAM 19/20

RIIHAN301E Operate elevating work platform

RIIHAN309F Conduct telescopic materials handler operations

RIIMPO317F* Conduct roller operations

RIIMPO318F* Conduct civil construction skid steer loader operations

RIIMPO319E* Conduct backhoe/loader operations

RIIMPO320F* Conduct civil construction excavator operations

RIIMPO321F* Conduct civil construction wheeled front end loader operations

RIIMPO323E* Conduct civil construction dozer operations

RIIMPO324F* Conduct civil construction grader operations

RIIRIS301D Apply risk management processes

RIIWHS202D Enter and work in confined spaces

RIIWHS204D Work safely at heights

RIICSCCSQ1 Short course Civil – CSQ Skill Set 1

SUBSIDISED COURSES UNDER THE SHORT COURSES PROGRAM

PLACES ARE LIMITED. APPLY NOW

1800 654 447 | tafeqld.edu.au

RTO 0275 I CRICOS 03020E | Information is correct at time of printing December 2019