Type SVF30 / SV30

Cubicle system made of composite chipboard

A floating system. With the cubicle system of type SVF30 JUMP the use of recessed

supports and a recessed head section results in a floating impression. In connection with wall

connections as shadow gap the system thus becomes a visual highlight.

Type SVF30 JUMP

(1)

2

(1) Cubicle system SVF30 JUMP with

recessed feet and recessed head section for

a floating look. Wall connections are made

by a shadow gap (not possible if there has

to be a cut out) resulting in a completely

smooth front.

(2) Cubicle system SVF30 JUMP in anthracite

colour. The completely smooth front

punctuates the high quality and puristic

optics.

(3) Wall-mounted privacy screens with an

ABS strip in the colour of the panel are

installed with durable aluminium holders.

(4) Massive aluminium holders in connection

with a head section which is recessed by

150 mm ensure the necessary stability.

These parts are not visible from the front.

(5) Stainless steel supports are recessed

below the dividing wall. To avoid breakages

an aluminium holder is used for additional

stability. Furthermore, the connection

between partition and front is stabilised

with a T-connector.

(2)

(3)

(4) (5)

3

Floor-to-ceiling and very private. The SVF30/S ALTUS toilet cubicle is the

ideal entry-level solution when it comes to full-height WC-partitions. The flush-mounted front,

circulating connections as a shadow gap and consistent colouring are convincing arguments for

this type of system. Privacy guaranteed!

Type SVF30/S ALTUS

4

5

(3)

5

(2)

(1)

(1) Cubicle system type SVF30/S ALTUS.

Quality chipboards with an 0,8 mm thick

laminate cladding on both sides are used

for increased stability. The use of ABS edges

in the same shade as the boards makes

the colouring even.

(2) Wall-mounted urinal screens in the

same material as the front of the stalls are

included in the delivery programme and

give it a harmonious overall image.

(3) A flush-mounted top panel is installed

over the doors, which is secured with invisible

compression spring pins. Stainless steel

hinges with tread high-performance polymer

are installed flush-mounted on the edge.

A concept on the special note. The cubicle type SVF30 from melamine resin-

coated chipboard with coloured ABS strips. This is an alternative cubicle, where beside pure function,

design is demanded. This flush fitting system lends a modern note with a smooth and straight

front wall. Fast cleaning of the partition walls, effective protection of edges and a responding

design are convincing arguments for this cubicle type.

Type SVF30

6

(1)

7

(1) The outside of type SVF30 cubicle

systems is generally flush-fitting. This is

achieved by using a special cover section

which ensures a flush fit even for doors

opening outwards. The result is a high-

quality, calm look, which lifts the entire

impression of the sanitary area.

(2) Cubicle type SVF30. Flush-mounted as

though it were all one panel!

(3) This cubicle system is nearly perfect

for a courageous colouring. Due to the

flushfitting structure the front design is not

interrupted by profiles. Regarding design,

ABS-strips might be chosen in a contrast

colour to the panel colour and thus set

a special priority.

(4) Stainless steel cubicle support in accor-

dance with DIN 1.4301, infinitively variable

height adjustment.

(5) Three roll stainless steel hinge with

special high-performance polymer treads.

These treads ensure that no maintenance

is required and that the door can be shut

quietly.

The hinges (no image) are installed flush-

mounted on the edge. A plastic strip is

milled into the edge as a privacy shield that

fits into the corresponding groove on the

other side when closing the doors.

(2)

(3)

(4) (5)

The favourite cubicle system for dry room areas. The Schäfer

cubicle system type SV30 is fabricated out of melamine resin-coated chipboard. The correct choice

for a simple, solid and easy-care cubicle. The ideal alternative for dry sanitary areas.

Type SV30

8

(1)

(1) Cubicle system type SV30, made of

30 mm strong quality particle board together

with anodised or powder coated surfaces.

A high-quality and robust cubicle type,

offering many configuration variations even

for smaller budgets.

(2) Wall hanging privacy screens from

satined tempered safety glass. This is only

one of various design options. You canalso order our product brochure glasscubicle systems.

(3) Stainless steel hinge with high-perfor-

mance polymer treads. These treads ensure

that no maintenance is required and that

the doors can be shut quietly.

(4) As an option, the doors can be equipped

with self-closing stainless steel hinges.

(2)

(3) (4)

9

10

wall connectionby aluminium u-profile as shadow gap

stabilising aluminiumbracket between frontand dividing wall

1980

mm

100

2080

mm

Drawing: cross-sectionCubicle system Type SVF30 JUMP

door handle

stainless steel hinge

nylon pin

3mmABS-strip

aluminium door stop barwith soft rubber strip wall connection tube

wall connectionby aluminium u-profile as shadow gap

connection with hidden U-profile

door handle

stainless steel hinge

nylon pin

3mmABS-strip

chipboard panel 30 mm

stainless steel support

165

Drawing: cross-sectionCubicle system Type SVF30/S ALTUS

detail ceiling connection

detail cover/door

detail floor connection

door

hei

ght 19

81 m

m

4co

ver ab

ove

door ca.20 mm

ca.15 mm

Because of the floating system, a stable wall connection of the front elements is essential. Please note our technical sheet for details.

angle for wallconnection

We reserve the right to alter specification without notice.

11

Drawing: cross-sectionCubicle system Type SVF30

aluminium door stop barwith soft rubber strip

wall connection byaluminium u-profilel

stainless steel hinge

nylon pin

3mmABS-strip

wall connectionto front wall

1850

mm

150

mm

2000

mm

door handle

chipboard panel30 mm

stainless steel support

1850

mm

150

mm

2000

mm

chipboard panel30 mm

stainless steel support

aluminium door stop barwith soft rubber strip

wall connection byaluminium u-profile

stainless steel hinge

3mmABS-strip

wall connectionto front wall

door handle

Drawing: cross-sectionCubicle system Type SV30

Stylish and elegant partitioning.

03/1

4 des

ignfo

riden

tity

mar

ken-

und

kom

mun

ikat

ions

design

Gm

bH

Schäfer Trennwandsysteme GmbH, Industriepark Willroth 37, D-56593 Horhausen, Fon: +49 (0)2687 / 9151-0, Fax: +49 (0)2687 / 9151-30, info@schaefer-tws.de, www.schaefer-tws.de

registered at the Germansociety of pre-qualification for building companies e.V.Registration number:010.049740

cubicle systemes – easy to design on www.plantastisch3d.de