Curb Clips - RenewAire

www.renewaire.com (800) 627- 4499 [email protected]

Curb Clip (Typical)

EV450 Rooftop HE Rooftop LE Rooftop RD Rooftop CA Rooftop

Curb ClipsSupplemental Installation Manual for Accessories

1.800.627.44992

Curb ClipsACCESSORY

RISK OF INJURY. OBSERVE ALL CODES AND THE FOLLOWING

This installation manual shows the suggested installation method. Additional measures may be required by local codes and standards.

Installation work must be done by qualified professional(s) in accordance with all applicable codes, standards and licensing requirements.

Any structural alterations necessary for installation must comply with all applicable building, health, and safety code requirements.

Use this product only in the manner intended by the manufac-turer. If you have questions, contact the manufacturer.

Pinch points occur where DOAS unit base drops into curb clips. Keep hands away!

Roof curb itself must be securely attached to the roof struc-ture, since the Curb Clips connect to the roof curb and not directly to the building structure.

Use of these curb clips does not imply that installation meets the requirements of specific local codes, and independent evaluation by a competent and licensed professional may be necessary in order to meet applicable local codes.

WARNING

RenewAire Curb Clips and application recommendations are provided “as is” and without warranty of any kind.

There is no industry standard for proper design of wind restraints for mechanical equipment on roofs, nor are there uniform code requirements for such of wind restraint by build-ing codes. In the absence of such standards or requirements, RenewAire LLC has made a good-faith effort to design wind restraints for its products. If additional assurance of fitness for a specific application is required, a design professional properly certified by an authority having jurisdiction should be consulted.

CAUTION

31.800.627.4499

Curb Clips ACCESSORY

1.0 OVERVIEW 5

1.1 DESIGN CRITERIA .................................................. 5

2.0 INSTALLATION 6

2.1 GENERAL INSTALLATION .........................................6

2.2 MINIMUM CURB ATTACHMENT TO ROOF ..................72.2.1 For Other Fastener/Roof Deck Combinations ........................7

2.3 EV450RT ................................................................8

2.4 HE1XRT ..................................................................9

2.5 HE1.5RT ...............................................................10

2.6 HE2XRT ................................................................11

2.7 HE3XRT ................................................................12

2.8 HE4XRT ................................................................13

2.9 HE6XRT, HE8XRT ..................................................14

2.10 LE6XRT ..............................................................15

2.11 LE8XRT ..............................................................16

2.12 LE10XRT ............................................................17

2.13 RD2XRT ..............................................................18

2.14 RD4XRT ..............................................................19

2.15 CA2XRT ..............................................................20

2.16 CA3XRT ..............................................................21

2.17 CA4XRT ..............................................................22

TABLE OF ILLUSTRATIONS

Figure 2.2.0 Curb Attachment to Roof ..........................................7Figure 2.2.1 Fastener Requirements .............................................7Figure 2.3.0 EV450 Curb Clip Placement ......................................8Figure 2.3.1 EV450 Curb Clip Installation .....................................8Figure 2.4.0 HE1X Curb Clip Placement ........................................9Figure 2.4.1 HE1X Curb Clip Installation ........................................9Figure 2.5.0 HE1.5 Curb Clip Placement ..................................... 10Figure 2.5.1 HE1.5 Curb Clip Installation..................................... 10Figure 2.6.0 HE2X Curb Clip Placement ...................................... 11Figure 2.6.1 HE2X Curb Clip Installation ..................................... 11Figure 2.7.0 HE3X Curb Clip Placement ...................................... 12Figure 2.7.1 HE3X Curb Clip Installation ...................................... 12Figure 2.8.0 HE4X Curb Clip Placement ...................................... 13Figure 2.8.1 HE4XCurb Clip Installation ...................................... 13Figure 2.9.0 HE6X, HE8X Curb Clip Placement ............................ 14Figure 2.9.1 HE6X, HE8X Curb Clip Installation ........................... 14Figure 2.10.0 LE6X Curb Clip Placement ..................................... 15Figure 2.10.1 LE6X Curb Clip Installation .................................... 15Figure 2.11.0 LE8X Curb Clip Placement ..................................... 16Figure 2.11.1 LE8X Curb Clip Installation .................................... 16

TABLE OF CONTENTS

Figure 2.12.0 LE10X Curb Clip Placement ................................... 17Figure 2.12.1 LE10X Curb Clip Installation .................................. 17Figure 2.13.0 RD2X Curb Clip Placement .................................... 18Figure 2.13.1 RD2X Curb Clip Installation ................................... 18Figure 2.14.0 RD4X Curb Clip Placement .................................... 19Figure 2.14.1 RD4X Curb Clip Installation.................................... 19Figure 2.15.0 CA2X Curb Clip Placement ....................................20Figure 2.15.1 CA2X Curb Clip Installation ...................................20Figure 2.16.0 CA3X Curb Clip Placement ....................................21Figure 2.16.1 CA3X Curb Clip Installation ....................................21Figure 2.17.0 CA4X Curb Clip Placement .....................................22Figure 2.17.1 CA4X Curb Clip Installation ....................................22

1.800.627.44994

Curb ClipsACCESSORY

THIS PAGE IS INTENTIONALLY LEFT BLANK.

THIS PAGE IS INTENTIONALLY LEFT BLANK

51.800.627.4499


1.0 OVERVIEW

RenewAire has for many years recommended that its rooftop units be fastened securely to the roof so that the equipment stays in place under extreme wind loads. Most rooftop-mounted HVAC equipment is not heavy enough to remain in place under design wind loads without being mechanically fastened to the building. When rooftop HVAC equipment moves due to severe wind conditions, the result is damage to the equipment and the building. However, the HVAC industry in general is only beginning to address this concern and there are few standards or guidelines to assist engineers and contractors.

RenewAire’s Curb Clips are an engineered, convenient and weather-tight method of attaching RenewAire units to roof curbs, and are suitable for most applications in climate zones with basic wind speeds of 90 mph (virtually all of the United States, except for coastal hurricane regions).

RenewAire’s Curb Clips do not protect the units itself from damage due to flying objects. RenewAire units have not been tested for intrinsic wind resistance and specific wind events might damage or even remove doors or inlet/outlet hoods.

1.1 DESIGN CRITERIA RenewAire’s Curb Clips are designed to keep the unit and roof curb attached to the roof, in most applications, in zones with 90 mph basic wind speeds, on roofs up to 60' in height, with the DOAS unit in any location on that roof. ASCE Standard 7-05 (Section 6.5.15.1) was the source of the basic engineering procedure and was adapted in order to calculated the loads acting on the DOAS (as a unit) under such conditions.

OVERVIEW

1.800.627.44996

Curb ClipsACCESSORY

2.0 INSTALLATION2.1 GENERAL INSTALLATIONCurb clips should be installed:

u AFTER installation of the roof curb and

u BEFORE installation of the DOAS.

1ST STEP: INSTALL CURBS.

See page 7 for RenewAire minimum attachment schedule.

Complete installation of roofing and flashing per standard practice.

2ND STEP: INSTALL CURB CLIPS.

Position the clips as shown in the drawings for specific ERV models. See following pages.

Fasten each clip to the curb with (3) #10-16 x ¾" self drilling screws (SDS) through the provided holes in the clips.

Install the gasket tape (provided with the curb). Put gasket tape on top perimeter of the curb. Run it over the top of the clips.

3RD STEP: INSTALL ERV UNIT.

Make sure necessary ducts are installed in the curb before installing unit

Place the RenewAire ERV on the curb – the ERV base rails should drop into the Curb Clips.

Drive (2) ¼-14 x 2 ½" (or 3 ½" for LE units) SDS through the clearance holes in each wind clip, through the ERV base rails, and into the back of the Curb Clip. Drive the screws snug.

IMPORTANT: EACH SCREW MUST DRIVE FIRMLY THROUGH THE BACK OF THE CURB CLIP (SEE DETAILS ON FOLLOWING PAGES).

INSTALLATION

71.800.627.4499


1

2

1

2

CORNER DETAIL

14" curb height

Roof Truss

#10 self-drillingscrews or equal

Fasteners two on each corner as detailed

Add additional fasteners evenly spaced to satisfy required amount per side

Center fasteners on flange16Ga. steel roof deck

I.D.

FASTENER REQUIREMENTS: 16GA STEEL ROOF DECKING

MODELEACH LONG SIDE EACH SHORT SIDE TOTAL # OF

SCREWSSCREW

SPECIFICATIONI.D. # SCREWS I.D. # SCREWS

EV450RT 41-5/8" 4 27-1/2" 3 14

#10 Minimum.Select length sufficient to fully engage threads in

roof decking.

HE1XRT 44" 6 14-1/2" 4 20HE1.5XRT 38-1/2" 6 24-7/16" 4 20HE2XRT 44" 6 34-3/8" 5 22HE3XRT 53-1/8" 6 50-3/8" 6 24HE4XRT 72-5/8" 8 50-3/8" 6 28HE6X/8XRT 99-1/4" 14 72-1/4" 12 52RD2XRT 84-1/2" 12 33-1/4" 8 40RD4XRT 86-3/4" 19 82-1/2" 12 62LE6XRT 111-1/2" 20 60-1/2" 10 60LE8XRT 151-1/2" 25 60-1/2" 10 70LE10XRT 191-1/2" 32 60-1/2" 10 84CA2XRT 33-7/8" 4 28-7/8" 4 16CA3XRT 53-3/4" 6 28-7/8" 4 20CA4XRT 73-3/8" 8 28-7/8" 4 24

2.2 MINIMUM CURB ATTACHMENT TO ROOF

INSTALLATION

FIGURE 2.2.0 CURB ATTACHEMENT TO ROOF

2.2.1 For Other Fastener/Roof Deck Combinations:

This curb-to-roof attachment method has been evaluated for installation on a 16 ga. steel deck, to withstand wind forces in zones with 90 mph basic wind speeds, on roofs up to 60' in height, with the ERV installation in any location on that roof.

The Fastener Requirements Chart above applies to a 16GA steel roof deck, with #10 TEK screws or better. With this fastener/roof substrate combination, the fastener pullout rating is 708 lbs, and the fastener shear rating is 1540 lbs.

For other roofing substrates, determine the pull-out and shear ratings for that substrate. If pull-out and shear ratings are less than those shown above, increase the number of fasteners used to provide the same total pull-out and shear strength for each side of the curb.

FIGURE 2.2.1 FASTENER REQUIREMENTS

1

2

1

2

CORNER DETAIL

14" curb height

Roof Truss

#10 self-drillingscrews or equal

Fasteners two on each corner as detailed

Add additional fasteners evenly spaced to satisfy required amount per side

Center fasteners on flange16Ga. steel roof deck

I.D.

1.800.627.44998

Curb ClipsACCESSORY

45 38 " O.D. 41 5

8 " I.D.

3114" O.D.

2712" I.D

.

712

"

712" 10"

10"

RenewAire LLC

SCALE:1:20 SIZE

DWG. NO.

A

MATERIAL:

FINISH:

DO NOT SCALE DRAWING.REMOVE ALL BURRS, BREAKSHARP EDGES.APPLICABLE STANDARDS: DIM.AND TOL. ANSI Y14.5

UNLESS OTHERWISE SPECIFIED,DIMENSIONS ARE IN INCHES.TOLERANCES:LINEAR 0.015HOLE SIZE 0.005ANGULARITY 3 SURFACE FINISH = 63 MICROINCH MINIMUM

DATE:DRAWN BY:

EV450RT_Curb_Clip_Placement

SHEET 1 OF 1

201 Raemisch Rd.Waunakee, WI 53597 USA

TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:

CHECKED BY: DATE:LEVEL DESCRIPTION OF REVISION DATE BY

INSTALLATION

NOTE: It may be necessary to tem-proarily remove the

two short crossbars (duct supports) in order to install the Curb Clips.

2.3 EV450RT

Use Curb Clip Kit PN 45EVCC Kit includes:

(8) Curb Clips PN 140174 (24) #10-16 x 3/4" self-drilling screws (16) ¼ -14 x 2 ½" self-drilling screws

FIGURE 2.3.0 EV450 CURB CLIP PLACEMENT

FIGURE 2.3.1 EV450 CURB CLIP INSTALLATION

91.800.627.4499


47 58 " O.D. 44" I.D.

1814

" O.D.

1412

" I.D.

714"

10"

10"

RenewAire LLC

SCALE:1:20 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:

HE1XRT_Curb_Clip_Placement

SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


10 GA. GALVANIZED RESTRAINTCLIP(8.000" LONG)

#10-16 x 3/4" S.D>S.(QTY 3 PER CLIP)

1/4-14 x 2 1/2" S.D.S(QTY 2 PER CLIP)

RENEWAIRE UNIT BASE RAIL

RENEWAIRE UNIT

1" x 1/4" GASKET TAPE

RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:

Clip DetailSHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


INSTALLATION



2.4 HE1XRT

Use Curb Clip Kit PN 1XHECC Kit includes:


FIGURE 2.4.0 HE1X CURB CLIP PLACEMENT

FIGURE 2.4.1 HE1X CURB CLIP INSTALLATION

1.800.627.449910

Curb ClipsACCESSORY

38 12 " I.D.

42 14 " O.D.

8 58 "

8 58 "

241

2" I.

D.

281

8" O

.D.

121

4"

RenewAire LLC

SCALE:1:20 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:

HE1.5RT_Curb_Clip_Placement

SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:



#10-16 x 3/4" S.D>S.(QTY 3 PER CLIP)

1/4-14 x 2 1/2" S.D.S(QTY 2 PER CLIP)


RENEWAIRE UNIT


RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:



TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


INSTALLATION



2.5 HE1.5RT

Use Curb Clip Kit PN 1.5XHECC Kit includes:


FIGURE 2.5.0 HE1.5 CURB CLIP PLACEMENT

FIGURE 2.5.1 HE1.5 CURB CLIP INSTALLATION

111.800.627.4499


44" I.D.

47 34 " O.D.

38" O.D.

343

8" I.D

.

8"

8"

171

8"

RenewAire LLC

SCALE:1:20 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:


SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:



#10-16 x 3/4" S.D>S.(QTY 3 PER CLIP)

1/4-14 x 2 1/2" S.D.S(QTY 2 PER CLIP)


RENEWAIRE UNIT


RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:



TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


INSTALLATION



2.6 HE2XRT





1.800.627.449912

Curb ClipsACCESSORY

50 38 " I.D.

54 18 " O.D.

9"

9"

12"

12"

5318" I.D

. 5678" O.D.

RenewAire LLC

SCALE:1:20 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:


SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:



#10-16 x 3/4" S.D>S.(QTY 3 PER CLIP)

1/4-14 x 2 1/2" S.D.S(QTY 2 PER CLIP)


RENEWAIRE UNIT


RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:



TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


INSTALLATION



2.7 HE3XRT





131.800.627.4499


9"

9" 9"

9" 10

14"

1014" 50 3

8 " I.D.

54 18 " O.D.

7234" I.D

. 7612" O.D.

RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:


SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:



#10-16 x 3/4" S.D>S.(QTY 3 PER CLIP)

1/4-14 x 2 1/2" S.D.S(QTY 2 PER CLIP)


RENEWAIRE UNIT


RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:



TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


INSTALLATION



2.8 HE4XRT





1.800.627.449914

Curb ClipsACCESSORY

614"

614"

1334"

1334"

838"

1918"

10 14 "

10 14 "

9 38 "

9 18 "

9 38 "

103" O.D.

9914" I.D

.

72 14 " I.D.

76" O.D.

RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:

HE6X8X_Curb_Clip_Placement

SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:



#10-16 x 3/4" S.D>S.(QTY 3 PER CLIP)

1/4-14 x 2 1/2" S.D.S(QTY 2 PER CLIP)


RENEWAIRE UNIT


RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:



TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


INSTALLATION



2.9 HE6XRT, HE8XRT



FIGURE 2.9.0 HE6X, HE8X CURB CLIP PLACEMENT

FIGURE 2.9.1 HE6X, HE8X CURB CLIP INSTALLATION

151.800.627.4499


5 78 "

5 78 "

12"

12"

12"

12"

12"

181

4"

181

4"

111 58 " I.D.

115 18 " O.D. 60

58" I.D

. 64

18" O

.D.

WARNING: CURB CLIP WILL INTERFEREWITH LIFTING LUGS IF CENTERED ON LONG EDGE

WARNING: CURB CLIPCOULD INTERFERE WITH DRAIN

ACCESS FROM BOTTOMIF CENTERED ON SHORT EDGE

RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:

LE6XRT_Curb_Clip_Placement

SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


RENEWAIRE LE UNIT

4 1/8TYP

1" X 1/4" GASKET

#10-16 X 3/4" S.D.S.(QTY 3 PER CLIP)

1/4-14 X 3-1/2" S.D.S.(QTY 2 PER CLIP)

10 GA. GALVANIZEDRESTRAINT CLIP(8.000" LONG)

RENEWAIRELE UNIT

BASE RAIL

LE UNIT CURB CENTERINGANGLE BRACKET

CURB PROFILE

INSTALLATION

2.10 LE6XRT

Use Curb Clip Kit PN 6XLECC Kit includes:


FIGURE 2.10.0 LE6X CURB CLIP PLACEMENT

FIGURE 2.10.1 LE6X CURB CLIP INSTALLATION

1.800.627.449916

Curb ClipsACCESSORY

12"

5 34 "

12"

12"

12"

12"

12"

12" 5 3

4 "

1814"

1814"

151 58 " I.D.

155 18 " O.D.

6058" I.D

. 64

18" O

.D.

WARNING: CURB CLIP WILLINTERFERE WITH LIFTING LUGSIF CENTERED ON LONG EDGE

WARNING: CURB CLIPCOULD INTERFERE WITH DRAIN ACCESS FROM BOTTOM IFCENTERED ON SHORT EDGE

RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:

LE8XRT_Curb_Clip_Placement

SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


RENEWAIRE LE UNIT

4 1/8TYP

1" X 1/4" GASKET

#10-16 X 3/4" S.D.S.(QTY 3 PER CLIP)

1/4-14 X 3-1/2" S.D.S.(QTY 2 PER CLIP)


RENEWAIRELE UNIT

BASE RAIL


CURB PROFILE

INSTALLATION

2.11 LE8XRT





171.800.627.4499


5 34 "

5 34 "

12" 12"

12" 12"

12" 12"

12" 12"

12"

1814"

1814"

191 58 " I.D.

195 18 " O.D.

6058" I.D

. 64

18" O

.D.

WARNING: CURB CLIP WILLINTERFERE WITH LIFTING LUGSIF CENTERED ON LONG EDGE

WARNING: CURB CLIPCOULD INTERFERE WITH DRAIN

ACCESS FROM BOTTOM IFCENTERED ON SHORT EDGE

RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:

NONE



DATE:DRAWN BY:MDB 8/5/15 LE10X_Curb_Clip_Placement

SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:

CHECKED BY: DATE:

-- --

CURB LE10XRT

LEVEL DESCRIPTION OF REVISION DATE BY

0_D02 12/21/15 MDBADDED SHEET 3 - LE CURB CLIP APPLICATION DETAILSCREW NOTES 3-1/2" LG WAS 3" LG, #10-16 WAS #10-24 18GA GALV

RENEWAIRE LE UNIT

4 1/8TYP

1" X 1/4" GASKET

#10-16 X 3/4" S.D.S.(QTY 3 PER CLIP)

1/4-14 X 3-1/2" S.D.S.(QTY 2 PER CLIP)


RENEWAIRELE UNIT

BASE RAIL


CURB PROFILE

INSTALLATION

2.12 LE10XRT





1.800.627.449918

Curb ClipsACCESSORY

10 14 "

10 14 "

8"

8"

8"

8"

84 12 " I.D.

88 14 " O.D. 16

58"

3314" I.D

. 37" O.D.

RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:

RD2XRT_Curb_Clip_Placement

SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


INSTALLATION

2.13 RD2XRT

Use Curb Clip Kit PN 2XRDCC Kit includes:


FIGURE 2.13.0 RD2X CURB CLIP PLACEMENT

FIGURE 2.13.1 RD2X CURB CLIP INSTALLATION

191.800.627.4499


7 12 " 6 7

8 " 6 7

8 " 6 7

8 " 6 7

8 " 7 1

2 "

838"

83

8"

25"

25"

82 12 " I.D.

86 18 " O.D.

863

4" I.D

. 90

12" O

.D.

RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:

RD4XRT_Curb_Clip_Placement

SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


Use Curb Clip Kit PN 4XRDCC

Kit includes:

(16) Curb Clips PN 163060

(48) #10-16 x 3/4" self-drilling screws

(32) ¼ -14 x 2 ½" self-drilling screws

INSTALLATION

2.14 RD4XRT

FIGURE 2.14.0 RD4X CURB CLIP PLACEMENT

FIGURE 2.14.1 RD4X CURB CLIP INSTALLATION

1.800.627.449920

Curb ClipsACCESSORY

17" 33 78 " I.D.

37 58 " O.D.

61

4"

614"

2878" I.D

. 32

58" O

.D.

RenewAire LLC

SCALE:1:20 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:

CA2XRT_Curb_Clip_Placement

SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:



#10-16 x 3/4" S.D>S.(QTY 3 PER CLIP)

1/4-14 x 2 1/2" S.D.S(QTY 2 PER CLIP)


RENEWAIRE UNIT


RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:



TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


INSTALLATION

2.15 CA2XRT



FIGURE 2.15.0 CA2X CURB CLIP PLACEMENT

FIGURE 2.15.1 CA2X CURB CLIP INSTALLATION

211.800.627.4499


15 18 "

15 18 "

53 34 " I.D.

57 38 " O.D.

614"

61

4"

2878" I.D

. 3258" O

.D.

RenewAire LLC

SCALE:1:20 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:


SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:



#10-16 x 3/4" S.D>S.(QTY 3 PER CLIP)

1/4-14 x 2 1/2" S.D.S(QTY 2 PER CLIP)


RENEWAIRE UNIT


RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:



TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


INSTALLATION

2.16 CA3XRT





1.800.627.449922

Curb ClipsACCESSORY

6"

13"

11 12 "

13"

6"

73 38 " I.D.

77 18 " O.D. 6

14"

61

4"

2878" I.D

. 32

58" O

.D.

RenewAire LLC

SCALE:1:20 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:


SHEET 1 OF 1


TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:



#10-16 x 3/4" S.D>S.(QTY 3 PER CLIP)

1/4-14 x 2 1/2" S.D.S(QTY 2 PER CLIP)


RENEWAIRE UNIT


RenewAire LLC

SCALE:1:50 SIZE

DWG. NO.

A

MATERIAL:

FINISH:



DATE:DRAWN BY:



TEL: (608) 221-4499FAX: (608) 221-2824

TOLL FREE: (800) 627-4499

TITLE:


INSTALLATION


(12) Curb Clips PN 140178 (36) #10-16 x 3/4" selfdrilling screws (24) ¼ -14 x 2 ½" self-drilling screws

2.17 CA4XRT



231.800.627.4499


THIS PAGE IS INTENTIONALLY LEFT BLANK.

THIS PAGE IS INTENTIONALLY LEFT BLANK

About RenewAireFor over 30 years, RenewAire has been a pioneer in enhancing indoor air quality (IAQ) in commercial and residential buildings of every size.This is achieved while maximizing sustainability through our fifth-generation, static-plate, enthalpic-core Energy Recovery Ventilators (ERVs) that optimize energy efficiency, lower capital costs via load reduction and decrease operational expenses by minimizing equipment needs, resulting in significant energy savings. Our ERVs are competitively priced, simple to install, easy to use and maintain and have a quick payback. They also enjoy the industry’s best warranty with the lowest claims due to long-term reliability derived from innovative design practices, expert workmanship and Quick Response Manufacturing (QRM).

As the pioneer of static-plate core technology in North America, RenewAire is the largest ERV producer in the USA. We’re committed to sustainable manufacturing and lessening our environmental footprint, and to that end our Waunakee, WI plant is 100% powered by wind turbines. The facility is also one of the few buildings worldwide to be LEED and Green Globes certified, as well as having achieved ENERGY STAR Building status. In 2010, RenewAire joined the Soler & Palau (S&P) Ventilation Group in order to provide direct access to the latest in energy-efficient air-moving technologies. For more information, visit: renewaire.com

Member of the S&P Group Family of Brands

2019 © RenewAire LLC138241_005_JUN19

201 Raemisch Road | Waunakee, WI | 53597 | 800.627.4499 | RenewAire.com

Documents

Curb Clips - RenewAire