Tandem Dump Truck Specifications

CURRENT MODEL YEAR, MINIMUM SPECIFICATIONS

Notes to Bidder: Dump trucks are to be used for transporting dirt and gravel for road constructions.

Truck, Conventional Cab and Chassis, Tandem Axle, Manual Transmission, with GVWR 64,000 minimum with dump body for this class

truck chassis,

ALL SPECIFICATION CONSIDRED MINIMUM

Equipment GENERAL Description

Year model New model 2018 or newer

Engine Diesel 390 Hp Minimum

Aspiration Turbo Charged With Air To Air Intercooler Filter Spin On Type

Engine retard Required

Transmission MAN- 13- Speed

Torque Minimum 1100 pound

Clutch Eaton Ceramic 6 Paddle 1650 Lb-Ft

Front axle 20,000 lbs 3.5in drop standard track

Rear axle Dual meritor rt46-160p 46,000 lbs with driver controlled differential locking in

forward-rear and rear-rear axle

Rear axle ratio 4.56. Required OR Rated for this configuration

Rear axle spacing Vendor shall work with body builder on mounting distance

Front springs Tapered leaf 20k

Anti-Sway Springs

Power Steering Power Steering

Suspension rear 46,000 lbs minimum , suitable for off road use, Hendrickson Haulmaax

Frame

Truck Manufacturer And Body Builder Recommendation For The Correct Psi And Rbm For This Truck Configuration

Double frame is not needed

Dump Truck Body

10 Gauge A607 grade steel, 48 Inch sides and front

3/16” A572 grade-50 steel, no seams, floor Telescopic Hoist

Asphalt lip on back Mesh electric tarp

Aluminum Tarp arms Air latch tailgate

Pressure treated wood board 2X8 inch

12 inch centers 5 inch cross members

Air dryer

Heated Air dryer. Unit(s) shall meet requirements of truck manufacturer for proper operation of air system, brake system, number of axles, and weight

rating of truck.”

Air compressor Unit(s) shall meet requirements of truck manufacturer for proper operation of

air system, brake system, number of axles, and weight rating of m truck.

Air tank

Unit(s) shall meet requirements of truck manufacturer for proper operation of air system, brake system, number of axles, and weight rating of with manual

drain valve truck.

Brakes Air Cam-Type Abs With Automatic Slack Adjusters With Dust Shield Front And

Rear Bendix Automatic Drain Valve Or Equal For This Gvwr

Parking brake Cab Controlled

Cab Mfg Standard Conventional

Cab to include Minimum (1) cup holder, dome light, mfg standard tinted glass, 1 ea grab

handle on each side, steps - both sides

Cab trim

To include mfg standard cab trim panels , door trim panels required , headliner to be soft padded cloth or vinyl, flooring to be heavy duty vinyl or rubber, sun

visors required driver and passenger padded vinyl

Seat driver

Air suspension, high back with integral headrest with fore, aft and height adjustments and recline. Vinyl with dual armrest with 3-point seat belt .with

orange 3-point seat belt, lap and shoulder belt type

Seat passenger Non suspension, high back, with integral headrest, vinyl, fixed back, dual

armrest with orange 3-point seat belt, lap and shoulder belt type.

Gauge cluster / instrument panel/data center

Gauge cluster includes engine oil pressure (electronic ) water temperature (electronic), fuel (electronic), tachometer (electronic), voltmeter, odometer

display, miles, trip miles, engine hours, fault code readout : warning system low fuel, low oil pressure, high engine coolant temp, and low battery voltage (visual

and audible): fuel economy, trip information, diagnostics, warning alarm will sound when headlights are left on

Mirrors (2) Power Adjustable Rectangular Approx 7"X13" With Convex Mirrors 7"

Round On Both Sides

Air conditioning / heat Factory installed w/ integrated defrost

Grill/ hood Conventional tilt with bug screen

Exterior color (WHITE) Fleet White

Steering column Tilt

Exhaust Mfg Standard Vertical Tailpipe To Include Turn Out And Guard

Electrical 12-Volt, Standard Equipment

To include

Mfg standard data link connector for vehicle programming and diagnostics in cab, hazard switch push on /push off, head light dimmer switch w/ turn signal

lever, horn electric single , starter switch electric key operated,windsheild wiper switch 2- speed with wash and intermittent with mfg standard wind shield

wipers

Tires

Floatation front tire

425/65R 22.5 20 Ply Steer Tires

Headlights Sealed Beam

Marker lighting control Marker interrupter required

Clearance/marker (4) truck lite amber factory installed on cab or sunshade

Stop, turn, tail & b/u Flange mounted with two backup lights

Power outlet Minimum (1)-12 volt

Alternator 12 Volt 130 Minimum

Batteries 2500cca

2 battery minimum

Jump start stud Located for ease of accessibility under hood acceptable

Battery box Mfg standard

Radio Am/fm with weather band, clock w/ two dual cone speakers in cab.

Cb Power connections one pair on dash

Horn Air Solenoid Operated Single Or Dual Acceptable Please Consider Location Due To Cab Shield For Dump Body

Backup alarm 87-112 decibels, adjusts automatically per OHSA

Engine block heater 120v 1500w w/block heater socket mounted below driver door

Air cleaner Dry type , single element

Fuel/water separator Required

Fuel tank Minimum 70 gallon aluminum tank

Def tank Min 7 gallon

Wheels front 22.5 steel wheel, hub piloted

Additional Information and requirements

1. Delivery - all deliveries are to be made between the hours of 8:00 a.m. and 3:00

p.m. Monday through Friday.

2. Acceptance - delivery does not mean acceptance. All vehicles are subject to

inspection to establish conformity to specifications prior to acceptance.

Invoicing of vehicles & equipment

After receipt of a purchase order, the vendor will be required to Contact Vehicle & Asset

Management, either by phone or email when said unit is ready for delivery. Aaron

Simmons or Scott Shinnaberry will be the point of contact for this process

Aaron.Simmons@tn.gov 615-532-8973 Scott.Shinnaberry@tn.gov 615-532-9005. These

gentlemen will require the vendor to supply an invoice, the original MSO and the

window sticker to ordering agency (Vehicle & Asset Management) before delivery. At

time of deliver to the end user, vendor will require a state employee signature and date on

delivery receipt that will then be forwarded back to Vehicle & Asset Management within

48hrs of delivery. If delivery is made and failure to supply an invoice or make

appropriate contact with Vehicle & Asset Management this may result in the unit being

returned to the vendor until an invoice can be supplied. Invoice & MSO must be

completed as follows: Vehicle & Asset Management 6500 Centennial Parkway,

Nashville, TN 37243.

1) Vehicle to be completely winterized

2) Minimum of 1/4 tank of fuel (by fuel gauge) upon delivery

3) Successful bidder to supply (2) sets of ignition keys and (2) sets of other

component keys per unit

4) Pre-delivery according to manufacturer's standard requirements

5) Invoice to include ignition and all other key numbers.

6) Vehicle to be clean inside and out with all applicable stickers removed.

Protective coverings and plastic to be removed from seats.

7) Warranty: will begin on date vehicle is placed in service not to exceed six (6)

months from delivery date.

8) Delivery mileage – maximum allowable miles at time of delivery is 300 miles.

Mileage warranty will begin at this mileage and the full manufacturer standard

warranty will be added to the delivery mileage. I.e. 36,000 mile warranty plus 300

delivery miles equals 36,300 miles of warranty period.

9) Vehicle specifications shall be confirmed before commencement of work.