Embed Size (px)
Citation preview
1
CURRICULUM VITAE
ENGR. PROFESSOR. OKORIE AUSTINE UCHE
Professor of Civil/Structural Engineering B.ENG (Civil) BUK, M.SC (Civil) ABU, PhD(Civil) ABU, MNSE, MMSN, REN (COREN)
Department of Civil Engineering, Faculty of Engineering, Bayero University, P.M.B 3011 Kano, Nigeria.
Telephone, 0806541822; 08023071533. E-mail [email protected]; [email protected]
A. PERSONAL PARTICULARS
Date of Birth: August 1st, 1965
Home/ Place of Birth: Amuda Isuochi
L.G.A: Umunneochi
State of Origin: Abia
Nationality: Nigerian
Marital Status: Married with Children
B. EDUCATIONAL INSTITUTIONS ATTENDED
2004-2008: Ahmadu Bello University, Zaria, Nigeria
1997-2000: Ahmadu Bello University, Zaria, Nigeria
1998-88: Kards Computer Institute, Kano
1991-94: Bayero University, Kano, Nigeria
1983-88: The Federal Polytechnic, Nekede- Owerri, Nigeria
1981-83: Emmanuel College, Owerri,
1978-81: Isuochi Secondary School, Nkwoagu Isuochi.
1973-78: Development Primary School, Owerri.
B1. QUALIFICATIONS OBTAINED
2009: PhD (Civil Engineering), January 26th, 2009.
2000: M.Sc.(Civil Engineering), October 27th , 2000.
1995: B.Eng.(Civil Engineering) (2:1) Second Class Honours
1988: HND (with Distinction) Agricultural Engineering
1983: WASCE/GCE
B2. ADDITIONAL QUALIFICATION
1988: Certificate in Data Processing
2
B3.MEMBERSHIP OF PROFESSIONAL ORGANIZATIONS
Registered Engineer (COREN) (R10, 172)
Member, Nigerian Society of Engineers (MNSE)(No. 12640)
Member, Material Society of Nigeria (MMSN) (No 428)
Member, American Society of Civil Engineers
B4. SHORT COURSES ATTENDED.
(i)Train- the- Trainer Course, organized by Nigerian Society of Engineers
(NSE) for Trainers of Compulsory Refreshers course for her new
corporate Members in NSE Headquarters in Lagos, March 2006.
(ii) Capacity Building Workshop for Universities in North –West Zone,
Organized by Education Trust Fund (ETF) / Nigeria University
Commission (NUC) for Lecturers of Universities in Nigeria at Mabayya
House BUK, Kano. 7-11th August 2006.
C. PRESENT POSITION:
PROFESSOR, Bayero University, Kano
Consulting Engineer, C.Eng.
D. WORKING EXPERIENCE WITH DATES:
I. 2015 to date: Key Expert Structures/Bridges, Ar-Ar Partnership,
Consulting Engineering firm for World Bank/French Development
Agency (AFD) Sponsored Adamawa Rural Access and Mobility
Project RAMP 2 covering over 205.9Km rural roads. (N2.987
Billion)
II. 2012 to 2015: Technical/Structural consultant Engineer, Hajaig
Construction limited for Building Construction of 5-Storeys Senate
Building of Bayero University Kano.(>N850Million)
III. 2012 to 2014: Project leader/Consultant Civil/Structural
Engineer, Multi-Integers Associates Ltd, TETFUND 2012 Projects
for Federal Polytechnic Bali. Design and construction Supervision of
The Polytechnic Library (N160Million)
IV. 2011 to 2012: Project leader/Consultant Civil/Structural
Engineer, Multi-Integers Associates Ltd, Construction Supervision
3
of ETF 2011 Projects for Federal College of Education (T) Bichi,
Kano.(N70Million)
V. 2010: Consultant Structural Engineer, Design and Construction of
3 storey building at 17 Odutala Rd. Sabon Gari for a Private
Developer.
VI. 2010 to date: Chief Consultant Structural Engineer, Strugg
Projects Limited, Civil/Structural Design and Supervision of The
Centre for Skill Acquisition, Development and Training Complex
Port Harcourt for Petroleum Trust Development Fund (PTDF) ) (1-
Nos 7- storey Building, 3nos 1-storey industrial workshop, 1 nos 3-
storey library, 4-nos 3 and 4 storey Student Hostels, access road,
culverts, drainage among other things)
VII. 2009: Consulting Engineer, Inter-tropical Consultants for the
Design of Pandabuwa Dam Matazu L.G.A Katsina.
VIII. 2009: Consulting Engineer, Inter-tropical Consultants for the
Design of Damarke Dam Katsina.
IX. 2008/2009: Consulting Engineer, Living Faith Church Auditorium,
Lan-Legal Nig Ltd
X. 2007: Consulting Engineer, Bayero University Library Complex Unit
2, AR- AR Partnership, Kano.
XI. 2006: Consulting Engineer, 500 –Seater lecture Theatre, Kano
State Polytechnic, AR- AR Partnership, Kano.
XII. 2006: Consulting Engineer, Design and Construction Supervision of
500-seater Lecture Theatre, Nassarawa State University, AR- AR
Partnership, Kano.
XIII. 2006: Consulting Engineer, Preliminary Investigation on Design and
Construction of 10km Kwanar Tudun-Kaya - Tunga road, AR- AR
Partnership, Kano.
XIV. 2006: Consulting Engineer, Design and Construction Supervision of
Faculty of Technology Extension Block, BUK. Kano.
4
XV. 2005: Consulting Engineer, Design and Construction Rehabilitation
supervision of twin 2-storey duplex for private developer, No. 13
Church Rd. S/g. Kano.
XVI. 2002: Consulting Engineer, Structural Design 1000-Capacity
Church Auditorium, Church of God in Nigerian, Abeokuta Rd. S/g
Kano.
XVII. 2001: Consulting Engineer, Design and Construction supervision of
500-seater Church Auditorium, Ebenezer Methodist Church, 1-3
Gold Coast Sabon Gari Kano, Multi- Integers Associates Ltd. Kano.
XVIII. 2000: Consulting Engineer, Design and Construction supervision of
3-storey Residential block for Apostolic Church, No.12 Emir Road
Kano.
E. RESEARCH AND EXTENSION EXPERIENCE WITH DATES
I. 2015 to date: Key Expert Structures/Bridges, Ar-Ar Partnership,
Consulting Engineering firm for World Bank/French Development
Agency (AFD) Sponsored Adamawa Rural Access and Mobility
Project RAMP 2 covering over 205.9Km rural roads. (N2.987
Billion)
II. 2012 to 2015: Technical/Structural consultant Engineer, Hajaig
Construction limited for Building Construction of 5-Storeys Senate
Building of Bayero University Kano.(>N850Million)
III. 2012 to 2014: Project leader/Consultant Civil/Structural
Engineer, Multi-Integers Associates Ltd, TETFUND 2012 Projects
for Federal Polytechnic Bali. Design and construction Supervision of
The Polytechnic Library (N160Million)
IV. 2011-12: Project leader/Consultant Civil/Structural Engineer,
Multi-Integers Associates Ltd, ETF 2011 Projects for Federal
College of Education (T) Bichi, Kano.
V. 2010- to date: Chief Consultant Structural Engineer, Strugg
Projects Limited, for the Design/supervision of Centre for Skill
Acquisition, Development and Training Complex Port Harcourt for
Petroleum Trust Development Fund (PTDF) (1-Nos 7- storey
Building, 2nos 1-storey industrial workshop, 1 nos 3-storey library,
5
4-nos 4-storey Student Hostel, 2nos 2-storey and 2nos 3storey
staff quarters, access roads, culverts, drainage among other
things) (N12Billion)
VI. 2009/2010: Project Consultant Civil Engineer for design,
construction of Pandabuwa Medium earth dam for Inter-Tropical
Consultants, Kano
VII. 2009: Project Consultant Civil Engineer for design, construction of
Danmarke Medium earth dam for Inter-Tropical Consultants, Kano
VIII. 2008/2009: Project chief Structural Engineer, 1000- Seater Living
Faith Church Auditorium, Lan-Legal Nig Ltd (Project cost;
N400Million)
IX. 2007: Project Structural Engineer, Bayero University Library
Complex Unit 2, AR- AR Partnership, Kano.(Project Cost;
N192Million.
X. 2006: 5 Project Structural Engineer, 500 –Seater lecture
Theatre, Kano State Polytechnic, AR- AR Partnership, Kano. (Cost,
N68Million)
XI. 2006: Project Structural Engineer, Design and Construction
supervision of 500-seater Lecture Theatre, Nassarawa State
University, AR- AR Partnership, Kano.(N72Million)
XII. 2006: Project Engineer, Preliminary Investigation and Engineering
Design of 10Km Tunga road , AR- AR Partnership,
Kano(N6.5Million).
XIII. 2006: Project Engineer, Design and Construction supervision of
Faculty of Technology Extension Block, BUK. Kano(N59Million).
XIV. 2005: Project Engineer, Design and Construction Rehabilitation
supervision of twin 2-storey duplex for private developer, No. 13
Church Rd. S/g. Kano.
XV. 2005- date: Project Engineer, BMCC Ltd.: Construction of 120 –
Room Private Hostel Block, Bayero University, Kano (2005-
date)(project cost; N208Million)
XVI. 2002: Consultant Engineer, Structural Design 1000-Capacity
Church Auditorium, Church of God in Nigerian, Abeokuta Rd. S/g
Kano.(N129Million)
XVII. 2001: Project Engineer, Design and Construction supervision of
5000-seater Church Auditorium, Ebenezer Methodist Church, 1-3
6
Gold Coast Sabon Gari Kano, Multi- Integers Associates Ltd. Kano.(
N158Million)
XVIII. 2000: Consultant Engineer, Design and Construction supervision of
3-storey Residential block for Apostolic Church, No.12 Emir Road
Kano.(N36Million)
F. TEACHING EXPERIENCE WITH DATES
F1 Undergraduate Teaching
I. Solid Mechanics, Tech 2202, 2001/2002-2005/2006
II. Engineering Survey 1, CIV 3304, 2002/2003 – 2005/2006
III. Engineering Survey 11, CIV 4303, 2002/2003- 2005/2006
IV. Structural Analysis 1, CIV 3309, 2002/2003 to 2008/2009
V. Structural Analysis 111, CIV 5406, 2007/20008 - date
VI. Advanced Foundation and Underground Construction, CIV, 5304,
2001/2003- 2010/2011
VII. Prestressed Concrete Design, CIV 5304, 2008/2009 - date
VIII. Design of Structural Element 11, CIV 4204 2007/08 - 2012/2013
IX. Engineer in Society, Tech 2101, 2002/2003
X. Technical Writing for Engineers, Tech3101, 2003/2004
F2 Postgraduate Teaching
i) Postgraduate Diploma in Civil Engineering
I. Engineer in His Society, CIV 7203 2005/06 to Date
II. Design of Steel and Timber Structures, CIV7307 2005/06 to
Date
III. Engineering Mathematics 1, CIV 7301, 2008 to 2011
IV. Engineering Mathematics 11, CIV 7201, 2008 to 2012
V. Structural Analysis 1, CIV 7313 2005/2006- 2006/2007
VI. Structural Analysis 11, CIV 7315 2005/2006- 2006/2007
ii) Master in Engineering, M.Eng (Civil)
I. Advanced Structural Analysis 1, CIV 8314, 2009 to 2015
II. Advanced Structural Analysis 11, CIV 8317, 2009 to Date
F3.COURSES TAUGHT IN THE LAST THREE SESSIONS
Sessions Contact
Hours
2013/2014 Session
CIV 5305: Prestressed Concrete Design 3
CIV 5406: Structural Analysis 111 4
CIV 7203: Engineer in His Society 2
7
CIV 7307: Design of Structures in Steel and Timbers 3
CIV 8314 : Advanced Structural Analysis 1 3
CIV 8317: Advanced Structural Analysis 11 3
18
2014/2015 Session
CIV 5305: Prestressed Concrete Design 3
CIV 5406: Structural Analysis 111 4
CIV 7203: Engineer in His Society 2
CIV 7307: Design of Structures in Steel and Timbers 3
CIV 8314 : Advanced Structural Analysis 1 3
CIV 8317: Advanced Structural Analysis 11 3
18
2015/2016Session
CIV 5305: Prestressed Concrete Design 3
CIV 5406: Structural Analysis 111 4
CIV 7203: Engineer in His Society 2
CIV 7307: Design of Structures in Steel and Timbers 3
CIV 8317: Advanced Structural Analysis 11 3
18
G. Research Interests:
I. Innovative Materials in Civil Engineering
II. Durability and Sustainability of Construction materials ( Concrete,
wood, steel, composites, etc)
III. Rheological Properties of Fresh Concrete
IV. Production and use Pozzolanas
V. Non-Destructive Testing, Sensing and Imaging for Civil Materials
and Structures
VI. Reliability and Risk Assessment in Civil/Structural Engineering
VII. Reliability-based Design and Optimization
VIII. Artificial Intelligence Application in Civil Engineering
Work/modelling
IX. Concrete Mix design, Creep and Shrinkage of concrete
I. ROUTINE ADMINISTRATIVE RESPONSIBILITIES WITH
DATES:
I. 2016: Chairman, School of Postgraduate Studies Business
Committee Group D
8
II. 2014-2016: Member School of Postgraduate Studies
committee on Review of Prospectus
III. 2014 to date: Member University Public Relations Committee
IV. 2015: Member, Local Organizing Committee, International
Conference on Green Materials for Sustainable Development
V. 2012 to 2016: Member Faculty Appointment and Promotion
Committee
VI. 2013: Member, Local Organizing Committee, National
Conference on Bridging the gap in Engineering education and
Industry
VII. 2013- 2015: Chairman, Departmental Orientation Committee
VIII. 2012- date ; Editor, Bayero Journal of Engineering and
Technology
IX. 2012- 2014: Chairman, Departmental Accreditation
Committee
X. 2012- 2016; Faculty Postgraduate Coordinator
XI. 2011: Member University senate Committee on
Linkages/Affiliation Team on Accreditation of Federal
Polytechnic, Bauchi, 23 -25 October, 2011
XII. 2011: Member University senate Committee on
Linkages/Affiliation Team on Accreditation of Waziri Umaru
Federal Polytechnic, Birnin Kebbi, 12 -14 Sept, 2011
XIII. 2010- to 2016: Member University Board of Postgraduate
School(SPS)
XIV. 2010- to 2016: Member Faculty Board of Postgraduate
Schools
XV. 2010 to 2014: Postgraduate Coordinator, M.ENG/PhD Civil
Engineering Department.
XVI. 2009: Member 4-Man University Committee on completion of
200seater CIT theatre (New Campus)
XVII. 2009-2010: Faculty Coordinator SIWES
XVIII. 2009-2012: Member University Business Regulatory
Committee
XIX. 2006- 2009: Member University Maintenance Committee
XX. 2006: Member University Council Committee on Structural
defects Investigation of New Post Graduate Block (New
Campus)
XXI. 2006: Member, Faculty Silver Jubliee Celebration Committee
XXII. 2005: Member Faculty Committee on COREN accreditation
XXIII. 2005: Co-opted Member University Task Force on
Rehabilitation of Infrastructures in the University
9
XXIV. 2004-2005: Faculty SWEP Coordinator (Academics)
XXV. 2007 –2012: Member Departmental Conference Organizing
Committee
XXVI. 2005: Member Departmental Committee on COREN
accreditation
XXVII. 2005& 2009: Member Departmental Committee on NUC
accreditation.
XXVIII. 2004- 2010: Member University‟s Furniture Loan Committee
XXIX. 2004- 2010: Departmental B.Eng. Final Year Project
Coordinator
XXX. 2001- 2009: Departmental Level Coordinator
XXXI. 2001-2012: Member Departmental Appointment and
Promotion Committee
XXXII. 2006-2016: Member Departmental Research Grant
Committee
XXXIII. 2008 -2016: Member Departmental Consultancy committee
J. COMMUNITY SERVICES
I. 2014 to Date: Lay President, Diocese of Kano Methodist
Church Nigeria.
II. 2014 to date: Chief Examiner, Kano Centre for Nigerian
Society of Engineers Professional Examination/Interview
III. 2014-2015: Member, Infrastructure Committee of NSE,
HQ
IV. 2014-2015: Member, Programmes and Publicity Committee
of NSE HQ
V. 2015: Member, Conference Planning Committee(CPC) of
NSE, SUNSHINE, 2015 AKURE (JAN –DEC, 2015)
VI. Member Council for Regulation of Engineering in Nigeria
(COREN) Visitation Panel to Ambrose Ali University AAU
Ekpoma, Edo State NOV 8th – 12th 2015.
VII. Member Council for Regulation of Engineering in Nigeria
(COREN) Visitation Panel to Obafemi Awolowo University
OAU Ile Ife, Osun State June 30th – July 4th 2014.
VIII. Member Council for Regulation of Engineering in Nigeria
(COREN) Visitation Panel to Federal University of
Technology now Adama Modibbo University of Technology
Yola, Nov. 25 - 29th 2012
IX. 2013: Member, Conference Planning Committee(CPC) of
NSE, International Engineering Conference and Annual
General Meeting, Abuja 2013 (JAN –DEC)
10
X. 2010-2012: Member, The Council Of Nigerian Society of
Engineers, NSE HQ Abuja
XI. 2012: Member, Conference Planning Committee(CPC) of
NSE, HARMONY, 2012 ILORIN (JAN- DEC, 2012)
XII. 2011: Member, Conference Planning Committee (CPC), of
NSE, „CANAAN 2011 CALABAR (JAN – DEC, 2011)
XIII. 2010- 2012: Chairman, Nigerian Society of Engineers
(NSE), Kano Branch
XIV. 2010: Member, Conference Planning Committee (CPC), of
NSE, Abuja 2010 (JAN –DEC 2010)
XV. 2008-2010; Technical Secretary, Nigerian Society of
Engineers (NSE), Kano Branch
XVI. 2007- 2013: Associate Interviewer, Nigerian Society of
Engineers, National Examination /Professional Interview.
XVII. 2007- date: Resource Person at NSE- 3 Day Compulsory
Refreshers Course for Prospective Members and Practicing
Engineers.
XVIII. 2004-2006: Secretary General, Nigerian Society of
Engineers (NSE), Kano Branch
XIX. 2004- Date: Visiting Lecturer, Kano State University of
Technology (2004-date)
XX. 2005: Member Local Organizing Committee (LOC), NSE,
Annual Engineering Conference, „Kano 2005‟ (2004 -2005)
XXI. 2005- 2011: Chairman, Isuochi Development Union
(Community
Association)
XXII. 2002- 2008: Diocesan Technical Adviser, Methodist
Church Nigeria
K. EXTERNAL EXAMINATION:
2010- date: External Examiner on PhD/Msc. Theses in Structural/
Material Engineering, Civil Engineering Department at Ahmadu Bello
University, Zaria. This includes:
K1: PhD Theses Examined:
1. Luper Daniel Nyihemba, Development of System-Based Preventive
Maintenance Strategies for RC Bridges Using Genetic Algorithm,
2017 PhD Dissertation ABU Zaria.
2. Hassan, Usman; Reliability Evaluation of Polythene Fibre Polymer in
Reinforced Concrete Beams, 2016 ( PhD Dissertation ABU Zaria)
11
3. Musa, Nuruddeen Mohammad; Effect of Neem Seed Husk Ash in
Concrete, 2013( PhD Dissertation ABU Zaria)
K2 MSC/M.Eng Theses Examined
4. Mustapha Chadi, (MSc/ENG/32207/12-13). MATLAB-based
Sensitivity Analysis of one-continuous RC Solid Slabs , MSC ABU
Zaria,2017
5. Maimunat O. Aliyu(MSC/P13EGVC8034) Strength Evaluation of
Corn Stalk Ash as pozzolana in Concrete MSC ABU Zaria,2017
6. Leon Bisong Akadang-Obena, (MSc/ENG/2308/2010-2011)
Stochastic Evaluation of Structural Steel Durability in Offshore
Platforms, MSC ABU Zaria,2017
7. Nuhu Sani Malan, Probabilistic Analysis of RC Slabs subjected to
blast Loading ,MSc ABU Zaria, 2017
8. Ibrahim Bello,Msc/ENG/P13EGC8024: Probabilistic Assessment of
GFRP Strengthed Reiforced Concrete Beam with Flexural
Deficiency Msc Thesis ABU Zaria, 2016.
9. Kudirat Oziohu Yusuf, Msc/ENG/ P13EGCV8042: Experimental and
Probabilistic Assessment of Concrete Incorporating Expanded
Polystrene (EPS) Waste at Eleveated Temperatures. MSC Thesis
ABU Zaria, 2016.
10. Lawan, Inusa; Evaluation of Plantain Peel Ash as Admixture in
Concrete, 2016 MSc thesis, ABU Zaria.
11. Philip Abubakar MEng/SEET/2011/2902 (2015) FUT MINNA:
Characterization and Grading of Some selected Local Timber
Species in Northwestern Nigeria
12. Zubairu Suleiman MEng/SEET/2012/3952 (2015): Characterization
and Grading of Some Timber Species in North-East Nigeria,
Federal University of Technology, FUT Minna.
13. Olugbenga Samuel Abejide (2014) MSc ABU Zaria
14. Ibrahim Aliyu (2014) MSc ABU Zaria
15. Hadiza Ibrahim Hamidu (2014) : MSc ABU Zaria
16. Taku, Kumator Josiphiah.: Effect of Calcination Temperature of
Rice Husk on the Properties of Cement mortar 2013 (M.Sc Thesis
ABU)
17. Hamza Shehu: (M.ScThesis, 2012)
18. Abubakar Onimisi Salihu: Influence of Effective
Lengths on Buckling of Hot-rolled Steel Columns (M.Sc Thesis)
19. AMBI, Abeku Comparison of Section Moduli in Deterministic and
Probabilistic Design of Steel Beams 2010/11 (M.Sc ABU Zaria)
12
20. MA‟ARUF, Ado.: Reliability-Based Design of Reinforced
Concrete Two-way Slabs using Eurocode 2 2010/11(M.Sc ABU
Zaria)
21. LEO, A.: Suitability of System Safety of Eurocode 3 Design for
Steel Mansard Truss Systems in Nigeria 2010/11(M.Sc Thesis)
22. Aminu Ibrahim: (M.Sc Thesis)
K3: External Moderator Examiner for B.ENG and PGDCE
XVI. 2010- 2012: External Examiner/Moderator for PGDCE for Waziri
Umaru Federal Polytechnic, Birnin Kebbi, Kebbi State
XVII. 2012/2013 to 2014/2015: External Examiner/Assessor to the
University of Maiduguri First Degree Programmes in Civil and
Water Resources Engineering
XVIII 2015/216: Visiting Lecturer: Federal University of Technology
now Modibbo Adama University of Technology Yola
L. PUBLICATIONS
L1. Theses:
I. Uche, O.A.U, “ Effect of Maximum Aggregate sizes on Compressive
Strength of Concrete”, unpublished B.Eng thesis, BUK, 1994
II. Uche, O.A.U, “Isosafety Design of RC Columns to BS 8110 1985”,
unpublished M.Eng thesis, ABU, Zaria, 2000.
III. Uche, O.A.U, “Effect of Aggressive Media on Mortar and Concrete
Materials”,
unpublished PhD thesis, ABU,Zaria 2008
L2. Journal Assessment
I. Assessor, Journal of Engineering, ABU, Zaria
II. Assessor, Journal of Engineering and Technology (JET), Bayero
University, Kano
III. Assessor, Techno Science Africana Journal, Kano State
University of Science and Technology, Wudil Kano.
IV. Assessor, Nigerian Journal of Tropical Engineering, ATBU
V. Reviewer, American Journal of Civil and Structural Engineering
(AJSCE)
13
VI. Assessor, Nigerian Journal of Engineering, Science and
Technology Research (NJESTR), Modibbo Adama University of
Technology,Yola.
VII. Assesor, Academy Journal of Science and Engineering, Nigerian
Defence Academy Kaduna, Nigeria
L3. BOOKS/BOOK CHAPTER:
L1: The Fundamental of an Engineer in his Society, Ist Edition,
2010. Printed by Ahmadu Bello University Press Ltd Samaru , Zaria
Nigeria ISBN 9781259175. WWW.abupress.org
L2: An Overview of the Importance of Technology to modern Tool
Development and Civilization in Dynamics in Science and
Technology, Murtala, M et als, 2012 (eds.) Kano University of
Technology, Wudil.
L4. PAPERS IN PEER REVIEWED JOURNALS
1. Musa Adamu, A.S Tifase and O.A.U Uche (2017) Engineering
Properties of Industrial Wood Waste Ash-Concrete, International
Journal of Advances in Construction Engineering, Vol.1 Issue 1 Pp1 -
10 ( MAT. Journals 2017)
2. G. Suleiman; O.A,U Uche and M.T. Abdulwahab (2017);
Durability Properties of Millet Husk Ash Stabilized Soil Block
admixed with Bitumen, USEP: Journal of Research information in
Civil Engineering Vol.14, No 2. Pp 1275-1292.
3. M.T. Abdulwahab; O.A,U Uche and G. Suleiman(2017);
Mechanical Properties of Millet Husk Ash-Bitumen Stabilized Soil
Block, Nigerian Journal of Technological development, vol.14 No 1
Pp34 -38. ISSN: 2437-2110. www.njtd.com.ng
4. S.Philip Bamiyo; O.Austine Uche and M. Adamu (2017): Prediction
of Load deflection behaviour of two way slab using Neural Network
Approach. International Journal of Optimization in Civil
Engineering; 7(4):633-644
5. Abdulwahab, M.T and Uche, O.A.U (2017): Uncertainty and
Reliability Analysis of Reinforced Concrete Folded plates. Bayero
journal of Engineering and Technology, Vol. 12 No 1 Pp 28-34 ISSN
2449-0539
6. A.U Barambu, O.A.U Uche and M.T Abdulwahab (2017): Reliability-
based Code Calibration for load and Safety factors for the Design
14
of a Simply Supported Steel Beam. USEP: Journal of Research
information in Civil Engineering Vol.14, No 1. Pp 1275-1292.
7. M.T Abdulwahab and O.A.U Uche (2016): Stochastic Sensitivity
Analysis Assessment of RC folded plates. USEP: Journal of
Research information in Civil Engineering Vol.13, No 3. Pp 1052-
1065.
8. Uche, O.A.U and Abdulkarim, M.A(2015): Performance of Recycled
Asphalt Pavement(RAP) as Coarse Aggregate in Concrete, Nigeria
Journal of Engineering Science and Technology Research,
MAUTECH YOLA Vol. 2 No. 1 Pp47-55 (National)
9. Balarabe Wada Isah and O.A.U Uche (2015): Potentials of Using
Sawdust Ash and Iron Ore Tailings in Production of Burnt Clay
Bricks. Journal of Civil Engineering and Environmental Technology
Vol 2 Number 6 Pg.550-554. ISSN 2349-8404
www.krishisanskiriti.org/jceet.html
10. Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche
Elinwa (2015): Characterization of Groundnut Husk Ash (Gha)
admixed with Rice Husk Ash (Rha) in Cement Paste and Concrete.
Advanced Materials Research Switzerland Vol 1119:pp 662-671
DOI: 10.4028/ www.scientific.net/AMR 1119.662
11. Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche
Elinwa (2015): Hydrochloric Acid Aggression in Groundnut Shell
Ash (GSA)-Rice Husk Ash (RHA) Modified Concrete. Scholars
Journal of Engineering and Technology (SJET) 3 (2A): 129-133
ISSN 2321 -435X. www.saspublishers.com
12. Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche
Elinwa (2014): Performance of Groundnut Husk Ash(GHA)- Rice
Husk Ash(RHA) Modified Concrete in environment, International
Journal Enginering Research Application Vol 4 Issue 11, Pp71-77
ISSN 2248-9622 (Open Access, www.ijera.org
13. Egbe-Ngu Ntui Ogork, Okorie Austine Uche (2014): Effect of
Groundnut Husk Ash (RHA) in cement paste and mortar
International Journal of Civil Engineering and Technology(IJCIET)
5(10). Pp 88-95
14. Musa, Adamu and O.A.U Uche, (2014): Durability of Properties of
Concrete Containing Scrap Tyre as Fine and Coarse Aggregate in
concrete, International Journal of scientific and Engineering
15
Research, Vol 5 Issue 11, Novermber 2014, ISSN 2229- 5518, pp
628 -634 www.ijser.org (Impact factor 3.2)
15. E.N Ogork, O.A.U Uche and A.U Elinwa (2014): Strength
Prediction Models of Groundnut Husk Ash (GHA) Concrete,
American Journal of Civil and Structural Engineering 1(4):104-
110(DOI:10.12966 ISSN 2372 -4552)
16. Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche
Elinwa (2014): A study on Groundnut Husk Ash(GHA)- Concrete
Under Acid Attack, International Journal Of Modern Enginering
Research(IJMER) Vol 4 Issue 7, July 2014.Pp30-35 (Open Access,
www.ijmer.com. ISSN 2249-6645)
17. Egbe-Ngu Ntui Ogork, Okorie Austine Uche (2014): Effect of
particle size of Groundnut Husk Ash (RHA) in cement paste and
mortar International Journal on Recent Innovation Trends in
Computing and communication 2(9). ISSN 2764-2969
18. Musa, Adamu and O.A.U Uche, (2014): Durability of Properties of
Concrete Containing Scrap Tyre as Fine and Coarse Aggregate in
concrete, International Journal of scientific and Engineering
Research, Vol 5 Issue 11, Novermber 2014, ISSN 2229- 5518, pp
628 -634 www.ijser.org (Impact factor 3.2)_
19. A.G Amuda, T.A Adedokun, O.A.U Uche and A.K Amuda (2014),
Engineering geological characterization of Basement Rocks for
Construction Aggregates: Acase Study of Kajuru Area Kaduna,
Nigeria, Civil and Environmental Research, ISSN 2224 -
5790(paper) ISSN 2225-0514(online) Vol. 6. No. 12 2014 pp 144 -
153 www.iiste.org
20. AG Amuda, O.A.U Uche and A.K Amuda(2014): Physico Mechnical
Characterization of Basement Rocks for Construction Aggregate: A
case Study of Kajuru Area, Kaduna. Nigeria, IOSR Journal of
Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN 2278-1684,
P-ISSN: 2320-334X, Vol 11, Issue 6 ver VI (NOV-DEC. 2014) PP46
-51 www.iosrjournals.org
21. Uche, O.A.U and Ahmed, A (2013): Reliability Design format for
Steel Plate Girder to Bs 5950 in Epistemics in Science, Engineering
and Technology, vol 3, No 1 pp 215-223, Silver Spring Mary
Land(MD) USA. (International; www.epistemicsgaia.webs.com ISSN:
5111-6005)
16
22. Okorie Austine Uche and Idris Haruna Mohammad (2014):
Probabilistic Sensitivity Assessment of Composite Steel Beam
Exposed to Fire, American Journal of Civil and Structural
Engineering, July 2014 1(3):56-61 (DOI:10.12966 ISSN 2372-
4552)
23. O.A.U Uche; M. Adamu and M.A Bahudden (2012): Influence of
Millet Husk Ash on Properties of Plain concrete, Epistemics in
Science, Engineering and Technology, Vol.2 no1 2012 Pp 68-73,
Silver Spring Mary Land(MD) USA. (International;
www.epistemicsgaia.webs.com ISSN: 5111-6005)
24. A.R, Anwar; A.Y AbdulFatah; O.A.U, Uche and A.A. Adedeji(2012):
Genetic Algorithm Based Design of Bearing Thrust Block for
Horizontally Bent Ductile Iron Pipes, Epistemics in Science,
Engineering and Technology, Vol.2 no1 2012 Pp 43-50, Silver Spring
Mary Land(MD) USA. (International;
www.epistemicsgaia.webs.com ISSN: 5111-6005))
25. Uche, O.A.U and Oyedipe, A.K(2010): Investigation into the
Properties of Long-span Aluminium Roofing Materials Used in
Construction Industries in Nigeria, Journal of Engineering and
Technology, Vol. 5 No. 2 Pp104-108 www.bayerojet.com (National)
26. Uche, O.A.U; Ejeh, S.P; Idris, A. and Amarty, Y. (2010): Effect
Of Some Aggressive Media On Compressive Strength Of Concrete,
Journal of Engineering and Technology,Vol. 5 No 1. Pp121-128
www.bayerojet.com (National)
27. Uche, O.A.U and Mohammed, I.G (2011) Relationship Between
Aggregate Crushing Value (ACV) and Ten Percent Fine Values (TFV)
For Nigerian Aggregates , Journal of Engineering and Technology,
Vol.6 Number 1&2 Pg126 – 131www.bayerojet.com (National)
28. Adedokun, T.A; Uche, O.A.U; and Abdulkadir, S: Evaluation
Criteria for Hand-Guided Vibratory Rollers in Compaction of
Laterites for Road Maintenance Works. Journal of Engineering and
technology, Vol 7. No 1 & 2 Pp39- 44. 2012 www.bayerojet.com
(National).
29. Uche, O.A.U and Abubakar, M.N (2010): Influence Of Neem Seed
Husk Ash (NSHA) On Engineering Properties Of Residual Lateritic
17
Soil, Journal Engineering and Technology, Vol. 4 No 2 Pp38-44.
www.bayerojet.com (National)
30. Uche, O.A.U (2010): Influence of Recycled Concrete Aggregates
(RCA) on Compressive Strength of Plain Concrete, Nigerian Journal
of Engineering , Ahmadu Bello University Zaria. vol.17NO. 1: 10-
15.(National)
31. Uche, O.A.U and Ejeh S.P (2010): Performance Ratings for
ordinary Portland cement Used in Construction Industry in Nigeria,
Nigerian Journal of Engineering, Ahmadu Bello University Zaria Vol.
17 No. 1, Pp106-112.(National)
32. Ejeh, S.P and Uche, O.A.U (2009): Effect of Crude Oil Spill on
Compressive Strength of Concrete Material, Journal of Applied
Science Research Pakistan, 5(10)1756-1761(International) INSInet
Publication
33. Ejeh, S.P and Uche, O.A.U (2009): Strength Evaluation of Cement
–Mortar Subjected to Aggressive Environment, International
Journal of Engineering, West Bengal India, vol. 3, No 2 pp201- 210.
(International)
34. Uche, O.A.U and Abubakar, M (2009): The effect of Overlap
Length on Efficiency of Glued Joints in Timber, Journal of
Engineering and Technology, vol.4, No.1 pp41-45.
www.bayerojet.com ( National)
35. Uche, O.A.U and Afolayan, J.O (2008): Reliability-Based Rating of
the BS8110 Design Criteria for Reinforced Concrete Columns.
Journal of Engineering and Technology, vol 3, No 1, Pp1-11.
www.bayerojet.com (National)
36. Uche, O.A.U and Inusa, E (2008): Quality of Hollow Sandcrete
Blocks in Zamfara State. Continental Journal of Engineering
Sciences, Vol 4. 9-13 (National)
37. Uche, O.A.U(2008) Effect of Curing System on Cement-based
Materials- Normal Concrete, Journal of Engineering science and
Technology, Ducan Science Publication Calabar, Vol 3.No3 pp91-95
(National)
18
38. Uche, O.A.U (2007): The Effect of Donkey -Dung on Properties
of Lateritic Soilcrete Blocks. Journal of Engineering and
Technology, Vol. 2 No. 1: Pp. 45- 54. www.bayerojet.com (National)
39. Uche, O.A.U (2007): Isosafety Design of Reinforced Concrete
Columns. Journal of Research in Engineering, University of Uyo,
IRDI, vol.4, No.4pp25-34. (National)
40. Uche, O.A.U (2006): Strength Development of Ordinary Portland
Cement used in Nigerian. Journal of Engineering and Technology,
Vol. 1 No. 1: Pp25-31. www.bayerojet.com (National)
41. Pam, Billy Fom; Uche, O.A.U and Joseph Elma Lagasi(2012): Effect
of Cement-Cow dung on the Compressive Strength of Lateritic
Bricks, An International Journal of Science and Management, TRG
Journal, Accra, Ghana (ISSN 20266499) Vol 1:1 Pp 31-34
42. O.A.U Uche, and J.A Ahmed (2013): Effect of Millet Husk Ash on
Index Properties of Marginal Lateritic Soil, Research Journal in
Engineering and AppliedSciences2(5)365-369(ISSN:226-
8467)www.emergingresource.org
43. M.T Abdulwahab and O.A.U Uche (2016): Stochastic Sensitivity
Assessment of Reinforced Concrete folded Plates. Journal of
Research information in Civil Engineering, University of Ilorin
Nigeria Vol 13 No 16 (National) (accepted paper)
44. Musa Adamu and O.A.U Uche (2016) Performance of Self
Consolidating High Performance Ternary Blended Concrete,
International Journal of Applied Engineering Research (IJAER)
Scopus INDEX (accepted)
L5. Papers in Official Conference Proceedings:
45. Aboshio A., Uche O.A.U. and Ogork E.N. (2016): Reliability Based
Calibration of Safety Factors for Reinforced Concrete Staircase
Designed to BS 8110 (1997). Proceedings of 2nd National Engineering
Conference on Bridging the Gap between Academia and Industry in
Nigeria-Refocusing the Engineering Discipline- 2, Organized by Faculty of
Engineering, Bayero University, Kano, Nigeria 6th – 8th December 2016,
pp. 14-18
19
46. Aboshio, A; Zayyad, I.B; Naim, G. and Uche, O.A.U. (2016):
Effect of Average Particle Size of Industrial Wood Waste Ash on
Engineering Properties of Concrete, Proceedings of 15th Annual
International Conference of the Nigerian Materials Society
(NIMACON 2016) ABU Zaria Nigeria.
47. Tifase, S.A; Uche. O.A.U and Aboshio, A. (2016): Effect of
Average Particle Size of Industrial Wood Waste Ash on
Engineering Properties of Concrete, Proceedings of 15th Annual
International Conference of the Nigerian Materials Society
(NIMACON 2016) ABU Zaria Nigeria.
48. Sajor, P. Bamiyo; Okorie A. Uche and Muhammad T.
Abdulwahab (2016) Load deflection behaviour of two way Rc slab
using Artificial Neural Network Approach, 2nd National Engineering
Conference ACICON 2016, Faculty of Engineering Bayero
University Kano Pp 144-149.
49. Kelechi-Asumba, S.E and O.A.U Uche (2015): Engineering
Classification of Some Selected Timber Species using EN 338
(2009), Proceedings of the 1st International Conference on Green
Engineering for Sustainable development, Faculty of Engineering,
Bayero University, Kano Nigeria. pp 71 -75.
50. Kelechi-Asumba, S.E and O.A.U Uche (2015): An Investigation on
the Engineering Properties of Higher and Lesser Known Timber
species in Kano Market, Proceedings of the Annual Conference on
Building Local Capabilities in the Nigerian Metals Industries
Nigeria Metallurgical Society (NMS). pp 71 -75 CD Rom/Book of
Abstracts.
51. Kelechi-Asumba, S.E and O.A.U Uche (2015) Characterization of
Timber Species in Kano, Proceedings of Annual International
Conference on Sience and Technology; Tools for achieving National
Development Faculty of Science Northwest University, Kano
Nigeria , PP 59-64 (ISBN -97897853550-5-5)
52. Musa Adamu and O.A.U Uche (2014) Strength Properties of
Concrete Containing Scrap Tyre as Fine and Coarse Aggregate
Proceedings of National Conference on Bridging the Gap between
Academia and Industry in Nigeria: Refocusing the Engineering
Discipline, Faculty of Engineering, Bayero University, Kano Pp. CD
Rom
53. Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche
Elinwa (2014): Multiple Regression Models for Strenght Prediction
20
of Groundnut Shell Ash (GSA)- Rice Husk Ash(RHA) Concrete,
Proceedings of National Conference on Bridging the Gap between
Academia and Industry in Nigeria: Refocusing the Engineering
Discipline, Faculty of Engineering, Bayero University, Kano Pp 78-
88. CD Rom
54. O.A.U Uche, and I.H Muhammad (2013): Probabilistic Sensitivity
Assessment of composite steel Beam Exposed to fire, Proceeding
of International Conference on Engineering and Applied Sciences,
Osaka, Japan, pp2126 – 2135. CDROM
55. Rufai, I.A;Uche,O.AU and Ogork, E.N (2012): Biosilica From Rice
Husk Ash as a New Engineering Raw Material in Nigeria, Proceeding
of National Engineering Conference on Strategies for Promotion of
Sustainable Technology-Based and Production-Driven Economy in
Nigeria, Nigerian Society of Engineers, at Kwara Hotel Ilorin,2012,
Programme and Abstracts, Pg(CD ROM)
56. Rufai, I. A and Uche, O.A.U, (2011): Biofuels as Energy carrier
for Sustainable Automobile Transportation System in Nigeria,
Proceeding of National Conference on Effective Transportation
System in Nigeria organized by Nigerian Society of Engineers,
CANAAN 2011 at Tinapa Resort, Programme and Abstsract Pg15
(CD ROM)
57. Uche, O.A.U and Rufai, I.A (2010): Climate Change Mitigation in
Africa: The Role of Effective Waste Management Strategy,
International Conference/AGM, Nigerian Society of Engineers,
“Abuja 2010” Progarmme & Abstracts of the Technical Papers, Pp
21(CD ROM).
58. Uche, O.A.U; Pam, B.F and Lagasi J. E (2010): Influence of Cow-
dung Blend on Strength of a Marginal Lateritic Soil, Proceedings of
Third International Conference on Research and Development,
Melton Hotel East Legon, Accra, Ghana Vol. 3, No. 9 Pp5-9.
59. Tifase,A.S; Uche, O.A.U and Musa, A (2016): Engineering
Properties of Industrial Wood Ash Concrete, accepted for
International Conference on Science, Engineering, Management and
Social Sciences of University of Teknologi Malaysia 6th -8th
October 2016.
N. SEMINAR/CONFERENCE PAPERS PRESENTED:
I. Basic Rudiments, Style and Format of Professional Report Writing,
Paper presented at National workshop on preparatory course for
NSE- Professional Interview/Compulsory Refreshers Course held
at Technology Incubation Centre, Kano. 3rd – 5th May, 2007
21
II. The role of Nigerian Society of Engineers (NSE) in Engineering
Development of Nigeria State, a paper presented at the National
Union of Engineering Students Association‟s (NUESA) week, Bayero
University Kano‟s chapter, December, 21st 2005.
III. Cost Reduction Strategy in Building Maintenance Management,
Paper Presented at Workshop on Cost Reduction Strategies in
Maintenance of Public Infrastructures byTechgrade Consulting at
Royal Tropical Hotel, Kano, Oct. 23-25th, 2007.
IV. Before the Next Building Collapse – An Engineer‟s Insight. A paper
presented at a 2- Week Certificate Course organized by West
African College of Nursing on Emergency Preparedness and
Management: Disaster Nursing held at National Orthopaedic
Hospital Dala Kano, August 2014
M. TECHNICAL REPORTS;
1 A Report of Subsoil Investigation for Foundation for Proposed
Bayero University Senate Building Submitted to Hajaiag
Construction Limited, 2012.
2 Environmental Impact Assessment for the Proposed Pandabuwa Dam
at Matazu Local Govt. of Katsina submitted to Inter-tropical
Consultants, 2009.
3 A Technical Report of An Investigation of Structural Integrity of
Burnt Storey office complex submitted to CONOil Plc, Lagos.
4 A Report of Structural Integrity of Sani Abacha Stadium Kofar
Mata, Kano State Submitted to Emacs Engineering Consulting, Kano,
2009.
5 Report of Soil Investigation At Proposed Pandabuwa Dam/Borrow
Pit Sites in Matazu Local Government Area of Katsina State
Submitted to Inter-Tropical Consultants, Kano.
6 Technical Report on Completion of 200 Seater Centre for
Information Technology (CIT) Theatre, Bayero University, Kano,
2010.
7 Technical Report on Structural Defects on New Postgraduate
School Block at New Site of Bayero Submitted to University
Council, 2006.
8 Technical Report of Accreditation Visit to Modibo Adama
University of Technology (Federal University of Technology) Yola
Submitted to Council for Regulation of Engineering in Nigeria,
Abuja, 2012.
22
M1 Additional Publications since Last Promotion:
Journal papers:
1. M.T Abdulwahab and O.A.U Uche (2016): Stochastic Sensitivity
Assessment of Reinforced Concrete folded Plates. Journal of
Research information in Civil Engineering, University of Ilorin
Nigeria Vol 13 No 16 (National )(accepted paper)
2. Musa Adamu and OAU Uche,(2016) Performance of Self
Consolidating High Performance Ternary Blended Concrete,
International Journal of Applied Engineering Research (IJAER)
SCOPUS INDEX (Accepted paper)
3. Uche, O.A.U and Abdulkarim, M.A(2015): Performance of
Recycled Asphalt Pavement(RAP) as Coarse Aggregate in Concrete,
Nigeria Journal of Engineering Science and Technology Research,
MAUTECH YOLA Vol. 2 No. 1 Pp47-55 (National)
4. Balarabe Wada Isah and O.A.U Uche (2015): Potentials of Using
Sawdust Ash and Iron Ore Tailings in Production of Burnt Clay
Bricks. Journal of Civil Engineering and Environmental Technology
Vol 2 Number 6 Pg.550-554. ISSN 2349-8404
www.krishisanskiriti.org/jceet.html
5. Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche
Elinwa (2015): Characterization of Groundnut Husk Ash (Gha)
admixed with Rice Husk Ash (Rha) in Cement Paste and Concrete.
Advanced Materials Research Switzerland Vol 1119:pp 662-671
DOI: 10.4028/ www.scientific.net/AMR 1119.662
6. Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche
Elinwa (2015): Hydrochloric Acid Aggression in Groundnut Shell
Ash (GSA)-Rice Husk Ash (RHA) Modified Concrete. Scholars
Journal of Engineering and Technology (SJET) 3 (2A): 129-133
ISSN 2321 -435X www.saspublishers.com
7. Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche
Elinwa (2014): Performance of Groundnut Husk Ash(GHA)- Rice
Husk Ash(RHA) Modified Concrete in environment, International
Journal Enginering Research Application Vol 4 Issue 11, Pp71-77
ISSN 2248-9622 (Open Access, www.ijera.org
8. Egbe-Ngu Ntui Ogork, Okorie Austine Uche (2014): Effect of
Groundnut Husk Ash (RHA) in cement paste and mortar
International Journal of Civil Engineering and Technology(IJCIET)
5(10). Pp 88-95
23
9. Egbe-Ngu Ntui Ogork, Okorie Austine Uche (2014): Effect of
particle size of Groundnut Husk Ash (RHA) in cement paste and
mortar International Journal on Recent Innovation Trends in
Computing and communication 2(9). ISSN 2764-2969
10. Musa, Adamu and O.A.U Uche, (2014): Durability of Properties of
Concrete Containing Scrap Tyre as Fine and Coarse Aggregate in
concrete, International Journal of scientific and Engineering
Research, Vol 5 Issue 11, Novermber 2014, ISSN 2229- 5518, pp
628 -634 www.ijser.org (Impact factor 3.2)_
11. A.G Amuda, T.A Adedokun, O.A.U Uche and A.K Amuda (2014),
Engineering geological characterization of Basement Rocks for
Construction Aggregates: Acase Study of Kajuru Area Kaduna,
Nigeria, Civil and Environmental Research, ISSN 2224 -
5790(paper) ISSN 2225-0514(online) Vol. 6. No. 12 2014 pp 144 -
153 www.iiste.org
12. AG Amuda, O.A.U Uche and A.K Amuda(2014): Physico Mechnical
Characterization of Basement Rocks for Construction Aggregate: A
case Study of Kajuru Area, Kaduna. Nigeria, IOSR Journal of
Mechanical and Civil Engineering (IOSR-JMCE) e-ISSN 2278-1684,
P-ISSN: 2320-334X, Vol 11, Issue 6 ver VI (NOV-DEC. 2014) PP46
-51 www.iosrjournals.org
13. E.N Ogork, O.A.U Uche and A.U Elinwa (2014): Strength
Prediction Models of Groundnut Husk Ash(GHA) Concrete,
American Journal of Civil and Structural Engineering 1(4):104-
110(DOI:10.12966 ISSN 2372 -4552)
14. Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche
Elinwa (2014): A study on Groundnut Husk Ash(GHA)- Concrete
Under Acid Attack, International Journal Of Modern Enginering
Research(IJMER) Vol 4 Issue 7, July 2014.Pp30-35 (Open Access,
www.ijmer.com. ISSN 2249-6645)
15. Okorie Austine Uche and Idris Haruna Mohammad (2014):
Probabilistic Sensitivity Assessment of Composite Steel Beam
Exposed to Fire, American Journal of Civil and Structural
Engineering, July 2014 1(3):56-61 (DOI:10.12966 ISSN 2372-
4552)
Conference Proceedings
24
16. Kelechi-Asumba, S.E and O.A.U Uche (2015): Engineering
Classification of Some Selected Timber Species using EN 338
(2009), Proceedings of the International Conference on Green
Engineering for Sustainable developmentNigeria Chemical Society
Nigeria. pp 71 -75.
17. Kelechi-Asumba, S.E and O.A.U Uche (2015): Engineering
Classification of Some Selected Timber Species using EN 338
(2009), Proceedings of the 1st International Conference on Green
Engineering for Sustainable development, Faculty of Engineering,
Bayero University, Kano Nigeria. Pp. 71 -75.
18. Kelechi-Asumba, S.E and O.A.U Uche (2015) Characterization of
Timber Species in Kano, Proceedings of Annual International
Conference on Sience and Technology; Tools for achieving National
Development Faculty of Science Northwest University, Kano Nigeria
, PP 59-64 (ISBN –97897853550-5-5)
19. Musa Adamu and O.A.U Uche (2014) Strength Properties of
Concrete Containing Scrap Tyre as Fine and Coarse Aggregate
Proceedings of National Conference on Bridging the Gap between
Academia and Industry in Nigeria: Refocusing the Engineering
Discipline, Faculty of Engineering, Bayero University, Kano Pp.CD
Rom.
20. Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche
Elinwa (2014): Multiple Regression Models for Strenght Prediction
of Groundnut Shell Ash (GSA)- Rice Husk Ash(RHA) Concrete,
Proceedings of National Conference on Bridging the Gap between
Academia and Industry in Nigeria: Refocusing the Engineering
Discipline, Faculty of Engineering,Bayero University, Kano Pp 78-88.
CD Rom
21. Tifase,A.S; Uche, O.A.U and Musa, A (2016): Engineering
Properties of Industrial Wood Ash Concrete, accepted for
International Conference on Science, Engineering, Management and
Social Sciences of Unversity of Teknologi Malaysia 6th -8th October
2016.
M2 Papers Submitted awaiting Acceptance:
I. A.S Tifase and O.A.U Uche (2016) Effect of Average Particle size
of
Industrial wood waste Ash on Engineering Properties of Concrete
25
II. Bamiyo S.P and Uche O.A.U (2016) Prediction of Load Deflection
Behaviour of Two way Slab using Artificial Neural Network
Approach
III. Uche, O.A.U and Abdulwahab T.M (2016) Uncertainties and
Reliability
analysis of Reinforced Concrete folded plates
IV. Abdulwahab, T.M and Uche O.A.U (2016) Probabilistic Sensitivity
Assessment of RC folded plates.
V. Uche O.A.U and Tifase, A.S (2016) Engineering Properties of
Industrial Woodwaste Ash-Concrete.
VII. Uche,O.A.U and Barambu, A.U (2016) Reliability Based Calibration of
Load and Material Safety Factors for Design of Simple Supported
Steel Beam.
VII. Prediction of 28th Day Compressive Strength of Concrete on the
7th Day Using Artificial Neural Network.
N. CONFERENCES ATTENDED
I. 2015: International Conference on Green Engineering for
Sustainable Development, organised by the Faculty of Engineering,
Bayero University, Kano Nigeria and Tanta University, Tanta Egypt.
(IG-GESD) 2015, December, 8 -12th 2015.
II. 2015: National Engineering Conference/ AGM, Nigerian Society of
Engineers, International Conference Centre Akure, Ondo State
2015, November, 19 -23th 2015.
III. 2013: International Engineering Conference/ AGM, Nigerian
Society of Engineers, International Conference Centre Abuja,
Abuja 2013, December, 3 -7th 2013.
IV. 2012: National Engineering Conference/ AGM, Nigerian Society of
Engineers, Kwara Hotel Ilorin, Harmony 2012, December, 3 -7th
2012.
V. 2012: 29th August; Highway Tech: Operation, Maintenance, Tolling
and Traffic Systems, Hotel Crowne Plaza, New Delhi India
VI. 2012: 30th August; Conference on Thermal Power EPC Summit 2012,
Hotel Crowne Plaza New Delhi India.
VII. 2012: 21st Annual Engineering Assembly, Organized by the Council
for the Regulation of Engineering in Nigeria, Abuja Nigeria
VIII. 2011: 2nd May: Yapi- Turkey International Build Exhibition,
Istanbul, Turkey.
26
IX. 2011: 3nd -5th May: 2nd Istanbul International Water Forum,
Istanbul, Turkey.
X. 2011: National Engineering Conference/ AGM, Nigerian Society of
Engineers, December, 2011.
XI. 2011: 20th Zonal Engineering Assembly, Organized by the Council
for the Regulation of Engineering in Nigeria, Kaduna Nigeria.
XII. 2010: 6th -10th December. International Conference on
Engineering Response in Combating the effect of Climate Change in
Africa organized by Nigerian Society of Engineers, “Abuja 2010”
XIII. 2010: 19th Annual Engineering Assembly, Organized by the Council
for the Regulation of Engineering in Nigeria, Abuja Nigeria
XIV. 2009: 18th Annual Engineering Assembly, organized by the Council
for the Regulation of Engineering in Nigeria (COREN), Abuja,
August 11-12, 2009.
XV. 2009: National Engineering Conference/ AGM, Nigerian Society of
Engineers, Heartland 2009, Owerri, December, 2009.
XVI. 2009: 3- Day Compulsory Refreshers Course for Corporate
Members Nigerian Society of Engineers in Kano, July 5th - 8th,
2009(As a Resource Person)
XVII. 2008: 17th Annual Engineering Assembly, organized by the Council
for the Regulation of Engineering in Nigeria (COREN), Abuja,
August 11-12, 2009
XVIII. 2008: 3- Day Compulsory Refreshers Course for Corporate
Members Nigerian Society of Engineers in Kano, May, 2008(As a
Resource Person)
XIX. 2007: 3- Day Compulsory Refreshers Course for Corporate
Members Nigerian Society of Engineers in Kano, May, 2006(As a
Resource Person)
XX. 2006: Capacity Building Workshop for Universities in North –West
Zone, Organized by Education Trust Fund (ETF) / Nigeria
University Commission (NUC) for Lecturers of Universities in
Nigeria at Mabiyya House BUK, Kano. 7-11th August.
XXI. 2006: 15TH Annual Engineering Assembly, organized by the Council
for the Regulation of Engineering in Nigeria (COREN), Abuja, 2006.
XXII. 2005: National Engineering Conference/ AGM, Nigerian Society of
Engineers, Kano, December, 2005.
27
XXIII. 2006: One-Day Train- the - Trainer Workshop for Nigerian
Society of Engineers, Compulsory Refreshers‟ Course, March,
2006
XXIV. 2006: 3- Day Compulsory Refreshers Course for Corporate
Members Nigerian Society of Engineers in Kaduna, Sept., 2006(As
a Resource Person)
XXV. 2005:14TH Annual Engineering Assembly, organized by the Council
for the Regulation of Engineering in Nigeria (COREN), Abuja, 2005.
XXVI. 2005: Annual Conference/ AGM, Material Society of Nigerian held
in ABU, Zaria, 2005
XXVII. 2005: National Workshop on Facilities Management and
Maintenance organized by Nigerian Society of Engineers, at Royal
Tropicana Hotel Kano, 1-3 August, 2005
XXVIII. 2004: 13TH Annual Engineering Assembly, organized by the Council
for the Regulation of Engineering in Nigeria (COREN), Abuja, 2004.
XXIX. 2004: National Engineering Conference/ AGM, Nigerian Society of
Engineers, Warri, Dec., 2004.
O. SUPERVISED OVER 50 B. ENG /PGDCE/ M.ENG./PhD. THESES,
SOME PROJECTS SUPERVISED with GRADUATION DATE:
PhD.CIVIL ENGINEERING MAIN SUPERVISOR
1. Egbe-Ngu Ntui Ogork: Characterization and Modeling of Properties of
Groundnut Shell Ash (GSA) Admixed with Rice Husk Ash(RHA) in Mortar
and Concrete PhD (2014) Graduated
2. Magana M Aliyu: PhD Civil Engineering (On-going)
M.ENG CIVIL ENGINEERING MAIN SUPERVISOR.
1. PAM, Billy Fom: Evaluation of the Compressive Strength of
Cement-Cow Dung Stabilized Laterite Bricks M. Eng (2010)
2. Magaji, Lawal Mohammed: An Investigation into the effect of
Temperature Variations on the compressive Strength of Concrete,
M.Eng (2011)
3. Bishir, Kado (2011) Probabilistic Assessment of Column –Beam
steel End-Plate Connection to BS 5950, M.Eng(2011)
28
4. Jazuli Aminu Ahmed: Effect of Millet Husk Ash on Lateritic Soil
Stabiliization M.Eng(2012)
5. Ahmed Ahmed; Reliability Design Format For Steel Plate Girder To
Bs 5950 (2000), M. Eng (2012)
6. Jogana Mukhtar: Software Developmemt For Analysis, Design
And Detailing Of Reinforced Concrete Beams to Bs 8110 (1997)
M.Eng (2012)
7. Muhammad Idris Haruna: Reliability Assessment of Composite
Steel Beams under Fire Situation Using EURO CODE 4 M.Eng 2013
8. Aye Ahaba John: Comparative Assessment of Compressive
Strength of Concrete Using Destructive and Non Destructive Test
Methods M.Eng 2014:
9. Ikechukwu Caleb Ogu: An Investigation on the Strength
Properties of Stabilized Reinforced Earth Beam. M.Eng. 2015
10. Sylvia E. Ozulu Asumba: An Investigation on the Engineering
Properties of Higher and Lesser Known Timber Species in Kano
Market. M.Eng.2015
11. Garba Suleiman : Properties of Millet Ash-Bitumen Stabilized
Lateritic Block. MEng. 2015
12. Akinola Sunday Tifase: Properties of Industrial Wood Waste Ash
Concrete. M.Eng 2015
13. Yunusa Ismail: Prediction of 28th Day Compressive Strength of
Concrete on the 7th Day Using Artificial Neural Network. M.Eng.
2015
14. Sajor Philip Bamiyo: Prediction of Load Deflection Behaviour of
Two Way RC Slab Using Artificial Neural Network, M.Eng. 2016
15. Muhammad Tayyeb Abdulwahab: Reliability-Based Design Format
for RC Folded Plates in Accordance with EUROCODES 2, M.Eng
2016.
16. Barambu Abubakar Umar: Reliability-Based Calibration of Safety
Factors for the Design of Simply Supported Steel Beam, M.Eng
2016.
17. Isa Felix Nkapheeyan: Strength Characteristics of Concrete
Containing High Volume MetaKaolin as Cement Replacement, M.Eng
2016.
PH.D, M.ENG INTERNALLY EXAMINED/CO-SUPERVISED
1. Bichi, Hassan Mustapha: Kinetics of Moriega (Zogale) Seed
Extracts in water disinfection (PhD, 2012)
29
2. Usman Bakundi: Computer Model of Beam-Masonry Wall
Interaction M.Eng (2009)
3. Ifeolorun Monyomi Olofin: Computer –Aided Analysis And Design
Of A Simply Supported Long Span Highway Reinforced Concrete
Bridge Deck/Beam System” M.Eng. (2010)
4. Shakir-deen Adeshina Akinloye: Reliability Analysis of
Telecommunication Towers in Northern Nigeria” M.Eng (2010)
5. Auwal Musa Sarina: Reliability-Based Design Format for
Reinforced Concrete Flat Slabs in Accordance with BS 8110 (1997)”
M.Eng (2010)
6. Modibbo Mohammed Tahir: “Reliability Assessment of Composite
Beam design” M.Eng (2011)
7. Nuhu Otohinoyi Mohammed: An Investigation into the Use of Cow
bones Ash (CBA) as an Admixture in Concrete” M.eng (2012)
8. Najiyu Abubakar: Development of Software for the Design and
Analysis of Composite Steel Beam and Concrete Floors. (2010)
9. Samaila Muazu Bawa: Development of Software for the Design of
Reinforced Concrete Slabs. (2010)
10. Mohammed Kudu: Development of Reliability Based Design Format
for Waffle Slabs to BS 8110 (1997), (2010).
11. Anwar Ali Rabiu: Optimal Design of Trust Block for Buried Pipeline
Using Genetic Algorithm, 2011.
12. Mara, Wazamtu: Groundnut Shell Ash as Admixture in Concrete
M.Eng 2014
13. Mohammed Sani Bello: Comparative Engineering Properties of
Laterized Bricks admixed with Kasti, Makuba and Rice husk Ash
(RHA) M.Eng 2014
14. Amuda Akeem Gbenga. Geological and Geotechnical
Characterization of Proposed Quarry site in Kajuru LGA Kaduna
State Nigeria M.Eng 2014
15. Isyaka Abdulkadir: Properties of Scrap Tyre steel Fibre
Reinforced High Performance Concrete with Rice Husk Ash
(STSFRHPC-RHA) M.Eng 2015.
16. Solomon Ayuba: Properties of Concrete with Sawdust Ash (SDA)
as Admixture. M.Eng 2015
17. Haruna Daud Gussau: An Investigation on the Effects of Partial
Replacement of Coarse Aggregate with Waste Metal bottle aps on
the properties of Concrete. M.Eng 2016
18. Muritala Sani: Assessment of Effects of Sugar cane Mill on the
propertie of Concrete, M.Eng 2016
30
PostGraduate Diploma in Civil Engineering Supervised:
1. Structural Design and Analysis of a 4-Storey R.C. Residential
Building a Biu in Borno State in accordance with BS 8110 2006.
2. Comparative Study of Compressive Strength of Hollow Sandcrete
Blocks, 2006
3. Effectiveness of Procurement Methods in Construction Works
(A Case Study of Katsina State), 2006
4. Effectiveness of Project Execution at Local Govt. Level, 2005.
5. Detailed Engineering Design and Economic Analysis of Flexible
Pavement (A Case Study of Eastern Bypass Road, B/Kebbi), 2006.
6. Comparative Strength Test on Sandcrete Blocks in Zamfara State,
2006.
7. An Investigation into the Compressive Strength of Laterite
Cement Compressed Bricks as a Low-Cost Building Material, 2007.
8. An Evaluation of Contract Procurement in Katsina State, 2006.
9. Budgets and Budgetary Trends for Public Construction Project
(A Case Study of Katsina State Budget from 1997-2001), 2006
10. Compressive Strength Analysis of Soil Cement Blocks Exposed to
Fire, 2006.
11. Compressive Strength Analysis of Soil Cement Blocks Exposed to
Fire, 2006.
12. The Effect of Different Overlapping Lengths to the Efficiency of
Glued Joints in Timber, 2006.
13. Variability in Strength of Reinforcement Steel Bars Used in
Construction Industry in Nigeria, 2005.
14. The Effect of Animal Dung on the Engineering Properties of
Lateritic Blocks, 2005.
15. Design of Conical Shaped R.C. Water Tower for Inwala Quarters,
Katsina., 2005.
16. An Appraisal of Collapsed Buidings in Nigeria and Structural
Engineers, 2005.
17. Failure of Two Storey Hostel Building in Auchi Polytechnic, Auchi
of Edo State, 2005.
18. Public Building Maintenance Strategies, 2003.
19. The Assessment and Suitability of Locally Sourced Lateritic
Soils for Civil Engr‟g Construction Purposes(A Case Study of
Ungogo Local Govt. Area of Kano State), 2008
20. Re-design of Minna Airport Runway and Parallel Taxiway, 2008,
21. Engr‟g Properties of Timber used for Construction in Nigeria, 2008.
22. Analysis and Design of R.C. Bridge at Mosedaru River in Irepo Local
Govt., Oyo State to BS 8110, 2008
31
23. Analysis and Design of R.C. Bridge Over River Kosu. Jere Local
Govt., Kaduna State, 2008.
24. Effect of Wind Power on Buildings (A Case Study of Argungu Town
in Kebbi State), 2008.
25. Comparison Effect of Acid on Compressive Strength of Cement and
Asphaltic Concrete, 2008.
26. Properties of Long Span Aluminium Roofing Materials used in
Nigeria Construction Industry, 2008.
27. Health and Safety Measures at Project Sites (A Case Study of
Kano Metropolis), 2008.
28. Modification of Lateritic Soil with Neem Seed Husk Ash as an
Admixture, 2008.
29. The Effects of Corrosive Agents on Steel Reinforcements, 2008.
30. An Investigation into the Factors Controlling Engr‟g Properties of
Laterite Bed Rock (A Case Study of Sokoto Town), 2010.
31. Causes of Building Collapse in Nigeria, 2010.
32. Factors affecting Maintenance Management in Public Building 2011
33. Palm Kernel Shell as Partial Replacement of Granite in Cement
Concrete 2011
34. Effect of Rice Husk Ash Average Particles size on the mechanical
Properties of RHA Concrete.
35. Reliability Assessment of Reinforced Concrete Box Culvert to BS
8110 2013
36. Analysis and Design of Reinforced Concrete Silo for the Storage of
Maize for Taraba State 2012
37. The Impact of Climate Change on Agriculture and Alterations of
the ecosystem
38. Computer Aided Design of Reinforced Concrete Shallow
Foundations 2012
39. Assessment of Irrigation Water Quality 2014
40. Design of Traffic Signal System for Zaria- Kaduna-Sabon gari Road
intersection, Zaria 2015; Ibrahim Suleiman Magaji
41. An Investigation into the Causes of Pavement Faliure ( A case
study of failed sections along Duste-Kwanar-Huguma Road)
P. Some B.Eng Thesis Supervised
1. Design and Analysis of R.C Elevated Water Storage Tank for
BUK New Campus Hostel; Jude Onoriode Ukueje Tec/96/7561
and Shakir-deen Adeshina Akinloye Tec/96/7519 (2003).
2. Computer Aided Design and Analysis of Shear Walls System
Supporting an Elevator Sadiq Ahmed Rufai tec/97/12143 (2002)
32
3. Investigation into the Engineering properties of Soil in Badawa-
Quarters of Kano (2002)
4. The Variability in Strength of Cement Brands Commonly Used in
Kano; Atiku Abubakar (2004)
5. Computer Aided Design Of Highway Engineering Curves; Rilwanu
Usman Tec/97/12188 (2004)
6. Design and Analysis of 3-storey Residential Building for Zone 1
Police H/Q (2004)
7. Comparative Strength Analysis of Common Portland Cement
Used in Northern Nigeria (2004)
8. Quality Assessment of Hollow Block produced in Bauchi
Metropolis (2004)
9. Quality Assessment of Hollow Block produced in Abuja and its
Environs (2004).
10. Effect of Cement Stabilization on Kano lateritic Soil (2004);
Abubakar Umar Tec/97/12192.
11. Effect of Cement on the Compressive Strength of Laterite used
in Earth-road construction in Kano
12. Strength Characteristics of Palm Kernel Shell-Aggregate
Concrete; Suleiman Nasir Abubakar Tec/97/12173 (2005)
13. An Investigation into the Causes of Cracks in Building Uchechi
Onyewotu, Tec/99/20576 (2005)
14. Design of Steel Warehouse for Storage of Construction
Equipment; Diana Ohiomokhare Adams Tec/99/20602 (2005)
15. Software Development for the analysis and Design of RC Slab;
Abdullahi Nabade Tech/99/20430 (2005)
16. Geotechnical properties of the Soil in North-Bank Area of
Makurdi in Benue State(2005)
17. Geophysical Method of Borehole Exploitation; Yamusa Bello
Yamusa; Tec/99/20494 (2005)
18. An Improvement of Lateritic Soil Blocks Using Makuba as
Additive; Ja‟afar Abubakar Tec/99/20323 (2005)
19. Soil Improvement Using Locally available Chalk, “Farar-
Kasa”(2006)
20. Computer Aided Design of Raft Foundation; Ofoneme O. Arinze
(Tec/00/CIV/00083) (2006)
33
21. Soil improvement Using Super-Phosphate Fertilizer Residue
(SFPR); Nasiru Danlami (Tec/01/00934) and Asama‟u Hamdan
Kankai (Tec/00/CIV/00259) (2006)
22. An Investigation on the Suitability of Locally Available Chalk
Fararkasa for Soil Improvement; Nuhu Isah Daliman
Tec/00/CIV/00075 and Saidu Sule Sagagi Tec/01/CIV/00936
(2006)
23. Effect of Curing System on Normal Concrete; Sadiq Awopeju
Tec/99/20532 and Nurudeen Yusuf Tec/00/CIV/00022 (2006)
24. Compressive Strength Test on Concrete Using Destructive and
non Destructive Test Methods Nurradden Ibrahim Abubakar
Tec/01/CIV/00595(2007)
25. Health and Safety Measures at Project Sites in Northern
Nigerian (2005)
26. The Effect of Different Fasteners in the Efficiency of Timber
Lap joint; Abubakar Dayyabu Tec/02/CIV/01920 (2008)
27. Implication of Section Modulus on Back to Back Steel Channel in
Structural Design; Babatunde Sefun Olubadewo
Tec/01/CIV/00536 (2008)
28. The Use of Rice Husk Ash in Low Sandcrete Block Production;
Abdurrashid Bashir Usman Tec/02/CIv/01039 (2009)
29. Effect of Donkey Dung on Engineering Properties of Laterites
30. An Investigation into the Factors Controlling Engineering
Properties of Lateritic Bed Rock
31. Comparative Assessment of Compressive Strength of Concrete
using Destructive and non Destructive test methods; Nasiru
Sani Ahmed tech/97/12/12175 (2006)
32. The effect of Firewood Ash on Setting Time of Cement and
Compressive Strength of Concrete; Bashir Alhaji Labaran
tec/01/CIV/00448 and Isiya Aminu Dabai Tec/01/CIV/00616(
2007)
33. The effect of Crude oil Spill on Normal Concrete, Anone Salifu
(Tec/02/01392 2007)
34. Effect of Rice Husk Ash and Lime on the Lateritic Soil
stabilization; Isaq Abdulazeez Tec/01/CIV/00438 and Ibrahim
Yakubu Tech/01/Civ/00629 (2007)
35. Computer Aided Analysis and Design of Power Transmission
Steel tower; Mustapha Yakubu Tec/01/CIV/00732 and Saheed
Adebayo Mustapha Tec/01/CIV/00540(2007)
34
36. Design of Concrete Pavement; Mohammed Saleek
tec/00/CIV/00117 (2007)
37. Effect of Recycled Concrete Aggragate (RCA) on Compressive
Strength of Concrete; Faisal Mukatar (Tec/01/CIV/00666
(2007)
38. An Investigation on the effectiveness of Firewood Ash(TOKA)
and Lime in Lateritic soil Improvement; Abubakar Abdullahi
Tec/01/CIV/00528 (2008)
39. Effect of mixing and curing water types on Compressive
Strength of Concrete; Saidu Dahiru (Tec/02/CIV/01048) 2009.
40. Effect of NSHA as a Partial Replacement on Properties of
Concrete; Ibrahim Tukur Tec/04/CIV/01472 and Habib
Mahmud Tec/04/CIV/01499 (2010)
41. Relationship Between Aggregate Crushing Value And Ten
Percent Fines Value For Nigerian Aggregates, Muhammad Isa
Giginya(Tech/02/CiV/01017) (2010)
42. The Effect Of Temperature On Chemical Coagulation Of Water;
Haruna Idris Abdullahi Tec/01/CIV/00738 and Salisu Ahmad
Tec/01/CIV/00739 (2010)
43. Prediction of Saturation Flow Using Three Models; Mohammed
Bello Abubakar Tec/02/CIV/01011 (2010)
44. An Investigation into the Strength Properties of Fibre
reinforced Lateritic Cement Bricks.
45. Properties of Maize Cob Ash (MCA) Concrete, B.Eng.2011
46. The Use of Bagasse as Pozzolana in Cement Mortar and
Concrete, B. Eng.2011
47. Effect of Millet Husk Ash on Properties of Concrete; Yusuf
Saminu Yakassai Tec/05/CIV/01542 and Abdulmalik Suleiman
Jere tech/05/CIV/01545 (2011)
48. Effect of Waste Rubber tyre tube fibres on the tensil strength
of Concrete; Habib Tukur Usman Tec/05/CIV/01588 and Sadiq
Ado Galadimma Tec/05/CIV/01550 (2011)
49. Effect of Waste Tiles as Coarse Aggregate in Concrete;
Mahamoud M Farouq Tec/06/CIV/01641 and Nura Garba
Tec/06/CIV/01650 (2012)
50. Geotechnical Investigation of a Proposed Building Site at
Janguza, Kano, 2012 Moses Benjamin Akuso Tec/06/CIV/01621
51. The Use of Waste Glass Powder as Fine Aggregate Replacement
in Concrete, 2012
52. Determination of the compressive Strength of Concrete using
Palm kernel Shell as partial Replacement of Coarse Aggregate;
35
Apepoju A Abdulrazaq Tec/05/CIV/01575 and Omolabi Musa
Isa Tec/05/CIV/01592 (2012)
53. Effect of Crushed Waste Glass(CWG) on Properties of
Concrete; Raubil Muhammad Lawal, tec/05/CIV/01547(2012)
54. Effect of Waste rubber tyre tube fibres on tensile strength of
concrete 2012
55. An investigation on Mango Husk Ash as Admixture in Mortar;
Tasiu Ashiru Sulaiman tec/06/CIV/01620 (2012)
56. Effect of Neem Seed Husk Ash (NSHA) as Partial Replacement
of Cement on Properties of Mortar; Abdmalik Abdullateef
Tec/06/CIV/01642 and Abdulrasheed Muhammad
Tec/06/CIV/01640 (2012)
57. Reliability Assessment of Lap-Length of Bars in Column and
Beams in Reinforced Concrete. B.eng. 2013
58. Reliability Analysis of Notched Timber Beam in Fire, B.Eng 2013
59. An Investigation on the Flexural Strength of Bamboo
Reinforced Concrete; Usman Sani Usaman tec/07/CIV/00072
and Jibrin Muhammad Salihu Tec/06/CIV/01618 ( 2013)
60. An Investigation of Highway Structural Pavement Failures ( A
case study of Dayi-Kano Road, Kano; Yusuf Babangida Attahiru
Tec/08/CIV/00422 and Amina Ahmed Aminu
Tec/06/CIV/01601 (2013)
61. Performance of Recycled Asphalt Pavement (RAP) Coarse
Aggregate in Concrete; Abdlkarim Muhammad Auwal
tec/06/CIV/01629 (2012)
62. Finite Element Analysis and Design of Reinforced Concrete
Shear Wall with Openings under seismic and gravity actions;
Mohammed Danjuma Yakubu Tec/o8/CIV/00297 June 2014
63. Using Mathematical Model to Determine the Extent of Cracks in
Structures ; Ogie Frank Jeffrey Tec/08/CIV/00277 and
Mustapha Isah Tec/08/CIv/00283 June 2014
64. Reliability Analysis and Assessment of Hyperstatic Kingpost
Trusses, March Sheriff Yusuf Bidemi Tec/09/CIV/00439 2015
Q. Prize/Honours/Awards
I. Best Over-all Graduating Student in the School of Engineering. The
Polytechnic Nekede Owerri (now, the Federal Polytechnic Owerri),
1988.
II. Best Graduating Student in The Polytechnic Nekede, Owerri (1988)
36
III. Scholarship Award for Academic Performance in the Faculty of
Technology, Bayero University, Kano (1992, 93)
IV. Balarabe Ismail Award for Best Graduating Student In Civil
Structures (1994)
V. Over all Best Graduating Student in Civil Engineering B.U.K (1994)
VI. Certificate of Honour, Bayero University Students‟ Union
Caretaker/Electoral Committee
VII. Certificate of Honour for Service, National Union of Engineering
Students Association‟s (NUESA) , Bayero University Kano‟s
chapter,
VIII. Certificate of Honour for Contribution Towards Development of
Engineering in Kano University of Technology, by National Union of
Engineering Students Association‟s (NUESA), Kano University of
Technology‟s chapter,
IX. A plaque by Nigerian Society of Engineers, Kano Branch for
Services to the Organization in 2006
X. A Plaque by Nigeria Society of Engineers, Kano Branch for Services
to the Organisation in 2014
R. REFEREES:
1 Engr. Prof. Mustapha Hassan Bichi, FNSE
Former Dean, Faculty of Engineering,
Bayero University,
P.M.B 3011,
Kano.
2 Engr. Dr. M.O.A. Mtallib
Head, Department of Civil Engineering
Bayero University,
Kano, Nigeria
Tel: 08037019138
3 Engr. A.A Rabiu, FNSE
Managing Partner,
AR-AR Partnership,
Suite B6, SDY Plaza, 13 Independence Road/Club road
P.O. Box 2590, Kano
Kano.
