CV Inst, Supv 2015

+91 9974188485, [email protected]

CURRICULAM VITAEPosition applied for: Instrument SupervisorPersonal ProfileName : Hitendrabhai Vashanbhai LadFather’s name : Vashanbhai S. LadDate of birth : 18th September 1968Gander : MaleMarital status : MarriedNationality : Indian Religion : HinduLanguage Known : English, Hindi & Gujarati Permanent Address Hitendrabhai Vashanbhai LadJivan Laxmi Park Society, Nursery roadVillage: Devsar, Bilimora , Taluka: Gandevi, District: NavsariGujarat, INDIA.Mobile No INDIA : +91 9974188485E-mail id: [email protected]

Passport DetailsPassport No : K 0692812Date of Issue : 23-12-2011Date of Expiry : 22-12-2021Place of issue : Surat, IndiaTechnical QualificationDiploma in Instrumentation & Control AIMES July-2005ITI (Instrumentation) I.T.I Bilimora, July-1984 to July-1986NCTVT (Instrumentation) I.T.I Baroda, Oct- 1987 to Oct-1989Experience DetailsGulf Experience-12 Years

1. Company name : KENTECH Doha Qatar. Period : 29th January 2015 to 16th April 2015Site/project : Shell GTL Project (ASU-1, 2, 3, 4)Designation : Instrument Supervisor (MTA)Nature of Duties : Report to MTA Manager/MTA Engineer and responsibility for MTA activity like Manpower handling for instrument crew & work supervision, Preparation of work permits(PTW) & Job Distribution, Documentation and planning of instrumentation works, Handled instrument work for GE turbine and compressor vibration & temperature monitoring system bently Nevada 3300 series, responsibility of remove , function test, loop test, re-install, re-checks vibration and temperature instruments installed on compressor and turbine, body and casing vibration/temperature, axial/radial vibration, key phaser, speed probes, temperature elements installed in turbine and compressor for bearing vibration, checking of vibration junction boxes, repair stroke test of anti-surge control valves, checking of lube oil and seal oil instruments etc.

2. Company name : S K Engineering & construction (SKEC), Saudi Arabia. Period : 10th December 2012 to 28th April 2014Site/project : Wasit Gas ProjectDesignation : Instrument Supervisor (Construction)Nature of Duties : Report to Instrument Manager/Project manager and responsibility for construction activity like Manpower handling for instrument crew & work supervision, Preparation of work permits & Job Distribution, Documentation and planning of instrumentation works, Able to read and follow P&ID and different types of loop diagram’s, Logic Diagrams, Cause & effect diagrams, Instrument specification sheets, Instrument block Diagrams, Instrument wiring diagrams, instrument cable and conduit schedule, Instrument installation schedule, instrument cable tray routings, instrument cable routings, Instrument and junction boxes location drawings, panel arrangement drawings, etc.

Page 1


Able to handle Installation of instruments cable tray, cable tray supports, instrument stands, Installation of instruments, Tubing installation as per hook-up drawings, instrument cables megger and continuity test, Cables pulling in trench and cable trays, indoor and outdoor, conduit installation indoor and outdoor, Instrument Cables termination in JBs and marshaling cabinets, Inter-panel wiring termination PIB, control room, Cable termination in Instruments side, Continuity check ,Megger test, Loop check from field instrument to control system by calibrators-375 & 475 & with different simulators, red-mark/As-Built drawings as per vendor provided data & approved modification drawings and data.

3. Company name : TCJV (Through NES Global), Doha Qatar.Period : 1th April 2011 to 10 May-2011Site/project : QG#1/2 LNG (Shut-Down)Designation : Instrument SupervisorNature of Duties : Report to Instrument Manager and responsibility for Manpower handling for instrument crew & work supervision, Preparation of work permits & Job Distribution, Documentation and planning of instrumentation works, coordinate with sub-contractor for instrumentation work like de-isolate, transmitter calibration, control valve removal/installation, termination, re-loop test/function test up to system, installation of NOX analyzer on flare, tube bundle installation, cable pulling, testing of anti-surge valves, replacement of solenoid valves and function test etc.

4. Company name : S K Engineering & construction (SKEC), Abu-Dhabi. Period : 18th January 2011 to 21st August 2011 Site/project : CS#1 Bab Gas Compression Designation : Instrument Supervisor (Construction)Nature of Duties : Report to Instrument Manager/Project manager and responsibility for construction activity like Manpower handling for instrument crew & work supervision, Preparation of work permits & Job Distribution, Documentation and planning of instrumentation works, Able to read and follow P&ID and different types of loop diagram’s, Logic Diagrams, Cause & effect diagrams, Instrument specification sheets, Instrument block Diagrams, Instrument wiring diagrams, instrument cable and conduit schedule, Instrument installation schedule, instrument cable tray routings, instrument cable routings, Instrument and junction boxes location drawings, panel arrangement drawings, etc.

Able to handle Installation of instruments cable tray, cable tray supports, instrument stands, Installation of instruments, Tubing installation as per hook-up drawings, instrument cables megger and continuity test, Cables pulling in trench and cable trays, indoor and outdoor, conduit installation indoor and outdoor, Instrument Cables termination in JBs and marshaling cabinets, Inter-panel wiring termination PIB, control room, Cable termination in Instruments side, Continuity check ,Megger test, Loop check from field instrument to control system by calibrators-375 & 475 & with different simulators, red-mark/As-Built drawings as per vendor provided data & approved modification drawings and data.

5. Company name : M. S. Al- Suwaidi Industrial Services, Saudi Arabia.Period : 10th October 2003 to 8th March 2010 Site/project : Bulk plants, Waste Water Upgrade, NGL, GOSP Designation : Project Engineer Instrument (Construction & Commissioning)Nature of Duties : Report to Instrument Manager/Project manager and responsibility for construction activity like Manpower handling for instrument crew & work supervision, Preparation of work permits & Job Distribution, Documentation and planning of instrumentation works, Review bid documents & preparing material take-off, Vendor offer review & technical discussion with vendor, NMR review & material follow-up with vendor, Preparation of Daily work reports, preparation of project materials requests, tools and equipment’s request, Attending client and construction meetings for progress , Assist different system vendor, Attending QA/QC instrumentation punch list item during construction work. Experience in installation, Maintenance, Trouble shooting, Loop checking, Erection and commissioning, Hot cut over upgrading, on Electronic / pneumatic and hydraulic instrument made by Honeywell, Foxboro, Allen Bradley, Rosemount, Yokogawa, Masoneilan, Taylor, Bently Nevada, for control and measuring process parameter like pressure, level, flow, temperature, speed and vibration system. Worked with different control system vendor TDC-3000 Honeywell DCS system, Foxboro DCS IA series, Triconex PLC, Siemens CS7 Scada system, Scan-3000 & Plantscape Honeywell Scada system, Siemens Simatic S5/S7 PLC, Bently Nevada 3300 and 3000 Vibration and temperature measuring system, & Fire and Gas detection system, GE compressors and turbine for lube oil and seal oil system, Simulation of alarm’s and trip’s on GE, Ellote, Demac compressors & Mistubhushi & Dresser land Turbine’s.

Page 2


Able to handle instrument calibration shop as per client requirements, calibration of all types of transmitters PT, TT, TC,FT,LT,TG,PG, control valves, all types of switches, solenoid valves, I/P convertor, E/P convertors, limit switches, Micro switches, Test equipment used during calibration smart field communicator 375 & 475, druck calibrators, Dead weight tester, Vaccum pumps, Temperature calibrator, Pneumatic calibrators, pressure pumps, Manometers, multimeter, DC power supply, pneumatic calibrator, standard pressure gauges, decade box, air regulators etc.

6. Company name : National Company (Kharafi) Kuwait. Period : 15th March 2001 to 24th August 2002Site/project : Shuaiba RefineryDesignation : Instrument Foreman (Maintenance)Nature of Duties : Report to Instrument maintenance Manager/Engineer and responsibility for maintenance of field instruments, Day to day PTW, Maintenance supports, routine maintenance of running instruments, worked on Tata Honeywell TDC-3000 DCS system with Triconex PLC system, loop simulation, stroke test of control valves, on-off valves, alarm simulations, fault finding for bad readings/errors rectifications, repair and calibration of control valves, I/P convertors, switches, transmitters, temperature elements RTD/Thermocouples, flow instruments, GE Compressor & turbine vibration & temperature instruments checking for Bently neveda system 3300 series etc.

7. Company name : Saudi Arabian Kent Company, Saudi Arabia. Period : 20th January 1993 to 12th September 1994Site/project : Petrokemya, IBN Zahr, Berry Gas Designation : Sr. Instrument Technician (Construction & Commissioning)Nature of Duties : Report to Instrument Manager/Engineer and responsibility for construction activity like instrument installation as per instrument hook-up drawings, air impulse tubing’s as per hook-up drawings, cable pulling as per cable schedule, glanding and termination as per instrument termination details, instrument calibration with Rosemount calibrators-375 & Honeywell 3000 series SFC, worked with Honeywell TDC-3000 DCS system vendor for loop checks & fault findings, able to read and follow PID, Location Drawings, Hook-up drawings, Instrument Installation drawings, instrument wiring diagrams, instrument cause and effect diagrams, instrument specification sheets, Instrument Logic diagrams, marshaling cabinets termination, system Input/output card installation, pre-commissioning and commissioning activity jobs.

ABROAD SHUT-DOWN/SHOT TERM JOBS 1Years 5 Months 1. Company name : Costain Abu-Dhabi Co. Abu-Dhabi, U.A.E

Period : 25th March 1997 to 22nd April 1997: 13th March 1998 to 17th April 1998: 08th March 1999 to 14th April 1999: 05th March 2000 to 12th April 2000

Site/project : Das Island Train 1,2,3Designation : Instrument Technician Machine (Possum no: 93563)

2. Company name : Middle East General Enterprise (Asahi) Abu-Dhabi, U.A.E Period : 21st October 1998 to 21st January 1999 Site/project : Banduq Island Designation : Instrument Technician

3. Company name : Mideast Constructor, (Mecon) Doha-Qatar.Period : 23 October 1997 to 16th November 1997Site/project : QAFCO FertilizerDesignation : Instrument Technician

4. Company name : Med Gulf Construction Company, Doha Qatar. Period : 24th October 1996 to 24th December 1996Site/project : QGPC Designation : Control valve Technician

5. Company name : Genipo Co ltd, Abu-Dhabi, U.A.E Period : 01st October 1995 to 13th February 1996Site/project : Das IslandDesignation : Instrument Technician

6. Company name : M/s Imeco, Abu-Dhabi, U.A.EPeriod : 09th April 1995 to 15th June 1995Site/project : Banniyas Power Station

Page 3


Designation : Instrument TechnicianNature of Duties : Report to Instrument Manager/Instrument Engineer and responsibility for Manpower handling for instrument crew & work supervision, Preparation of work permits & Job Distribution, Documentation and planning of instrumentation works,

India Experience-04 Years 2 Months

1. Company name : Gujarat Godrej Innovative Chemical Ltd, Gujarat.Period : 21st January 1992 to 15th October 1992 Site/project : Alfa Olefin Plant Designation : Instrument Technician (Maintenance)Nature of Duties : Report to Instrument Maintenance Manager/Engineer and responsibility for Maintenance of field instruments, Day to day Maintenance supports, routine maintenance of running instruments, worked on Tata Honeywell TDC-3000 DCS system with Allen Bradly PLC system vendor loop simulation, stroke test of control valves, on-off valves, alarm simulations, fault finding for bad readings/errors rectifications, repair and calibration of control valves, I/P convertors, switches, transmitters, temperature elements RTD/Thermocouples etc.

2. Company name : A.B.S. Plastic Ltd, Gujarat.Period : 08th September 1990 to 18th January 1992 Site/project : Poly Propylene PlantDesignation : Instrument Technician (Maintenance)Nature of Duties : Report to Instrument Engineer and responsibility for Maintenance of field instruments, Day to day operation supports, routine maintenance of running instruments, alarms checks, worked on microprocessor based instruments, repairs and calibration of level, pressure, flow, temperature instruments like control valves, transmitters, switches, Rosemount, fisher, Mesonilean, Control valve with Positioner etc.

3. Company name : Consolidated Petrotech Industries Ltd, Gujarat.Period : 01st September 1989 to 07th September 1990 Site/project : Carbon plantDesignation : Instrument Technician (Maintenance)Nature of Duties : Report to Instrument Engineer and responsibility for Maintenance of field instruments, Day to day operation supports, obtain work permit system, Instrument repairs, calibration of field instruments like level, pressure, flow, temperature instruments, routine maintenance of running instruments.

4. Company name : Indian Petrochemical corp. Ltd, Gujarat. Period : 30th September 1987 to 29th September 1988 Site/project : Poly Propylene Plant Designation : Trainee Instrument TechnicianNature of Duties : maintenance technician training

DeclarationI hereby declare that all the above furnished information is correct to the best of my knowledge.

Date: _________________ Place: ________________ Signature of Applicant

Page 4

Documents

CV Inst, Supv 2015