Embed Size (px)
Citation preview
Said BEN ABDALLAH Emails: [email protected]
Tel: (+216) 22 221 656
Address: El Ain Street, 3003, Sfax – Tunisia
Age: 28 years old
Nationality: Tunisian
Surface Well Testing/Data Acquisition Engineer Since 2012, been a graduate engineer from Tunisia Polytechnic School, I have started working in OILSERV Company as Well Test and Data Acquisition Engineer.
During this four year hand-on experience, I have been involved in diverse interesting operations starting from tender evaluation and
technical/commercial offers preparation to equipment installation and on site work.
This has enabled me not just to enhance my technical knowledge in Oil and Gas domain, but also to acquire new skills and develop my
personality.
Being a dedicated professional with a great eye for details, keen to learn and a strong team player who can withstand a burden of work,
I have performed successfully a variety of jobs and looking forward to further diversify and deepen my knowledge.
PR OF E SSI ON AL E XP E RIE N CE S
OILSERV, Tunisia/Iraq from September 2012 until now (One of the providers of an expanding range of oilfield services from well logging to integrated oilfield services...)
Well Testing/Data Acquisition Engineer
Tenders evaluation/offers preparation/contracts negotiations:
Lead All Technical discussions and analysis of tenders’ Scopes of Work and provide convincing recommendations regarding
Company technical capability and required equipment list: 80 % of evaluated tenders were technically qualified.
Responsible of screening and preparing the commercial offers: 70% of prepared offers were commercially qualified.
Actively negotiate main terms of contracts with clients (duration, equipment to be used, discount to be applied…).
Well testing planning, design and maintenance:
Responsible of Well Test design and equipment selection to provide cost effective solution to client and best benefit to
Oilserv.
Responsible of delivering Test programs for Full package Well Tests onshore.
Supervise and witness the spotting and the installation of testing equipment.
Supervise and witness of electrical and mechanical equipment.
Supervise the maintenance of equipment.
Prepare the Layouts and P&ID’s of diverse types of jobs.
Operation Safety and Risk assessment:
Apply all HSE policies in well testing jobs.
Participate in the preparation of Job Safety Analysis, HAZID, HAZOP documents.
Elaborate the Task Risk Assessment and Job safety analysis (JSA).
Well Testing Skills:
Work on All Testing High Pressure (5K, 10K) equipment operating, Pressure testing, and Maintaining: Hydraulic ESD
Panels, Surface Safety Valves, Choke Manifolds Gate Valves, 3-Phase Separators…
Calibrate all measuring equipment: DW Testers, Ranarex, Senior Daniels, Pressure Controllers, Barton and differential
recorders, transfer pumps, API Kit…
Compute, record (using Fekete Fieldnotes) and interpret Well Test data.
Run Well Testing program of Well Testing calculation.
Elaboration of well testing procedures.
Laboratory supervision.
Perform the pipe sizing studies and provide convincing proposal of piping design.
Perform around 30 training sessions for technicians, operators and junior engineers.
Prepare Quality Job file for well testing jobs.
Development of well testing calculations software to help well test crew during operations.
Development of multiple software using VB.NET (equipment maintenance management, well testing glossary,
equipment thickness database…).
Development of database of drawings for all the well testing equipment to prepare the layout and P&ID.
Production Monitoring/Data management.
Memory gauges programming and maintenance.
Surface PVT sampling (preparation, execution and reporting).
Major Performed Jobs:
Iraq - Kurdistan:
GENEL ENERGY: DST Jobs in Iraq Kurdistan.
TALISMAN: DST Jobs in Iraq Kurdistan.
- Basra:
ENI North Rumaila and Safouen: Well Testing Jobs.
Tunisia
PETROFAC: DST, Completion, Clean-up, production Job.
OMV: Inline production test, well testing with sand production.
MARETAP: Swabbing, Production.
WINSTAR: Frac, Swabbing, Coil Tubing.
PERENCO: Clean-up, Production Job.
CTKCP: Well Test Job.
TPS: Clean-up, Production Job.
I N T E R N S H I P S
TOTAL S.A, Pau, France from March till June 2012 (One of the global leaders in the oil and gas industry)
Graduation project internship During my graduation internship, I was able to design an experimental Apparatus for Micromodel Experiments at High Pressure and High Temperature.
SEREPT (Tunisian Company for Oil Research and Exploitation), Tunisia from July till August 2011 (Venture ETAP and OMV, Tunisian Company for Oil Research and Exploitation, development and production of oil and gas in Tunisia.)
Engineering internship The issue of the performed internship deals with the replacement of a pump and how to choose a new one that meets the
required characteristics. The obtained results confirm that the centrifugal pumps are the most appropriate for the problem. This
internship aims also at seeking solutions for troubleshooting pumps and maintenance methods to improve the
performance of the selected pump.
MATEM (MANUFACTURES TECHNIQUES DES METAUX), Tunisia from July till August 2010 Work internship
Major Performed Tasks:
Regular worker tasks (Assembling, cutting and welding metal sheets and metal profiles);
Using XSTEEL TEKLA for a simple design of buildings;
Acquisition of fundamental knowledge of welding methods and types of profiles used in the field of metal
construction.
E D U C A TI O N B A C K G R O U N D
Tunisia Polytechnic School, La Marsa, Tunisia from September 2011 to February 2012
Master degree in Science in computational mechanics
Fluid mechanics, Finite element method, Finite volume method, Continuum mechanics, Vibration, Structural and solid mechanics, English...
Tunisia Polytechnic School, La Marsa, Tunisia from 2009 to 2012
Engineering degree (Option: Structures and Mechanics) Some Realized projects:
Energetic: Design of a zero-energy commercial building and simulation in 4 Tunisian sites using e-QUEST. Process engineering Simulation of a vapor-liquid equilibrium diagram (binary Acetone- Methanol), and development of
a graphical user interface using MATLAB. Structure Dynamics: Pad Footing Design Based on the British Standard Design and simulation of six-degree of freedom manipulator with spherical wrist.
Preparatory Engineering Institute of Sfax (IPEIS), Sfax, Tunisia June 2009
General Academic Studies Degree (DEUG)
Success in the national exam of entrance to engineering schools (ranked 26th out from 1550 successful candidates).
15 November 1955 School, Sfax, Tunisia June 2007
Baccalaureate exam school Section: Mathematics
Distinction: very good (17.04/20)
Computer Skills
Programming Languages: C/C++, Turbo Pascal, FORTRAN, VB, VB. NET and Python. Software: Matlab/Simulink, Maple, TEKLA XSTEEL, PROTEL, RDM6, CATIA V5, AUTOCAD, Surfer, eQUEST, SAP 2000, WELLFLO, Mathematica, FEKETE Fieldnotes, PHA-Pro, Fleet Maintenance Pro. Others: Ms Office (Word, Excel, PowerPoint, Project, VISIO), LaTeX, Nitro PDF.
Languages
Arabic Native language English (TOIEC Certified) Fluent French Fluent
Trainings
Security training (HSEQ) in SEREPT and TOTAL to understand the security’s standards used in the oilfield.
Training in entrepreneurship and business creation in the innovation incubator in the EPT-Carthage.
OiLSERV Oilfield Introduction Course (OSI) in Antalya, Turkey.
OILSERV SAFE training.
OILSERV Pressure Operation standard.
Fire Fighting (Level 1).
Emergency First Aid (Level 1).
Desert Defensive Driving.
Slip, trip and fall awareness.
H2S Training.
Lifting Training.
