SUDHIR KUMAR Mobile : +91 9001954954 / +77753486404 E-mail : [email protected] Carrier Objective A position as a Chief Mechanic in an environment that will utilize my skills and experience as well as complement my work and career goals. Work Experience Sun Drilling Co LLC Kazakhstan ( November 2014 – Continue) Currently associated with Sun Drilling Co. Kazakhstan, as Chief Mechanic for ZJ70 Drilling rig 2000 HP VFD Deep Industries Ltd ( April 2014 – October 2014) Associated with Deep Industries as Chief Mechanic and taking care of commissioning of work over rig of 100 ton with Cairn Project at Barmer for 7 months and doing maintenance of all Rig site tools, engines and equipments. Focus Energy Ltd (February 2009 – February 2014) Having an experience of more than 6 years as a” Chief Mechanic” on Rigs like: Drilling Rig (2000 HP) 1. (ZJ50) Drilling Rig (1000 HP) 2. (Zj30) 3. RD 20 Atlas Copco Shiv-Vani oil & gas exploration services ltd (February2004 December 2005) Had work as a Mechanic for around 1 year and was looking after most of the commissioning and maintenance part of tools and equipments. Dewanchand Ramsaran, Industries Ltd (January 2006 to january2009)

CV _SUDHIR KUMAR(Chief mechanic) (1)

Download DOCX Report

Upload
sudhir-kumar
View
66
Download
0

Embed Size (px)

Citation preview

SUDHIR KUMAR

Mobile: +91 9001954954 / +77753486404 E-mail: [email protected]

Carrier Objective

A position as a Chief Mechanic in an environment that will utilize my skills and experience as well as complement my work and career goals.

Work Experience

Sun Drilling Co LLC Kazakhstan ( November 2014 – Continue)

Currently associated with Sun Drilling Co. Kazakhstan, as Chief Mechanic for ZJ70 Drilling rig 2000 HP VFD

Deep Industries Ltd ( April 2014 – October 2014)

Associated with Deep Industries as Chief Mechanic and taking care of commissioning of work over rig of 100 ton with Cairn Project at Barmer for 7 months and doing maintenance of all Rig site tools, engines and equipments.

Focus Energy Ltd (February 2009 – February 2014)

Having an experience of more than 6 years as a” Chief Mechanic” on Rigs like: Drilling Rig (2000 HP)

1. (ZJ50)

Drilling Rig (1000 HP)2. (Zj30)3. RD 20 Atlas Copco

Shiv-Vani oil & gas exploration services ltd (February2004 December 2005)

Had work as a Mechanic for around 1 year and was looking after most of the commissioning and maintenance part of tools and equipments.

Dewanchand Ramsaran, Industries Ltd (January 2006 to january2009)

Expertise

-Caterpillar and Cummins engines as D-397, D-398, D-399, 3512, C-18 and C-15- Wilson 65, Wilson 75, IR-1200, work over and drilling mobile rigs -- 1500 HP, 2000 HP, and 2000 HP SCR and VFD rigs.- 11S, 8S NOV top drive, LTI top drive and can rig top drive.-Overhauling and repair all mechanical safety equipments as per NOV standard.-Repaired and Overhauling of : Draw works, Mud pumps, Rotary table, Traveling block and Crown Blocks Act-Maintenance and overhauling all type BOP, and accumulators as per NOV maintenance system Air Drilling-Frac Unit (Stewart and Stevenson):

Operation and Maintenance of Frac Pumper units and its engine and all (DDEC IV, Allison Transmission)Operation and maintenance of Coil Tubing Unit, Sandar Unit.

Technical Skills

1. BOP control system lining

Page 2: CV _SUDHIR KUMAR(Chief mechanic) (1)

2. Hydraulic Equipment handling3. Maintenance

Education Qualification

1. Diploma in Mechanical from Rajeev Gandhi Produdhyogiki Vishwavidyalaya, Madhya Pradesh.2. Intermediate from U.P. Board Allahabad3. Matriculation from U.P. Board Allahabad

Personal Details:

Date of Birth: 20/05/1982Address: 52, Village Post – Aurangabad (Ahir), District : Buland-Saher, Uttar Pradesh.