12
1/7  Hany Abdelfatah Ahmed Senior Mechanical Engineer  Cell #1: +966564541849  Email #1 : [email protected] Cell #2: +966596081407 Email #2 : [email protected] Date of Birth: May, 30 th  1979 Qualifications: B.SC Mechanical  Engineering Mechanical Power Division Faculty of Engineering  Cairo University‐ 2001   Grade:  Very Good with Honor Degree Current Location: AlKhobar  Eastern District  Saudi Arabia Professional Affiliates: Egypt & Saudi Syndicate of Engineers Nationality : Egyptian Marital Status : Married Language: Arabic, English Skills: Excellent Coordination skills  Excellent Communication skills Leadership personality Hard worker, selfmotivated, multi task personality working with team spirit willing to learn and improve Listening and Analyzing  Research abilities, writing effective reports and seeking relevant information  Computer Skills: Sprinkler Hydraulic Calculation Software Program (Elite). AutoCAD, MS Office, Design Spreadsheets Dear Sir, Please find herein after a brief about my professional experience. I am graduated from the Faculty of Engineering, Cairo University, Mechanical Power Department 2001 (Very Good With Honor Degree).  I have 14 years of experience in mechanical design and contracting technical office for Building & High Rise construction.  I worked as a Designer for Dar AlHandasah (Shair and Partners) Cairo Core Team, AlEstishareyoon Zohair Fayez & Partnership (ZFP) Cairo Office, and GHD global international, Cairo Office, and DPME.  I worked also as Main Contractor Technical Office Leader in Saudi Oger ltd in a major project under ARAMCO supervision using ARAMCO standards.  During my professional experience I worked in major large scale building construction projects; for example: ‐ Jabal Alkal'a (Abraj Albeit) Makkah, KSA ‐ Facility Management Buildings in Pearl, Qatar with Dar AlHandasah ‐ King Abdulaziz Center for World Culture Dhahran, KSA with Saudi Oger ‐ JIMI Mall UAE With GHD. Faculty of Education Taibah University Medina KSA with ZFP.   My work experience is extended to Plumbing Systems using all international codes (UPC ‐ NPC –ASPE  BS ‐ Aramco Standard (SAES)) ‐ Fire Protection Systems according to NFPA ‐ Irrigations Systems  Pump Station ‐ Swimming Pools  Water Fountains ‐ LPG System ‐ ‐ Medical Gases ‐ External networks for towns and compounds  etc. In addition to general experience about HVAC systems & Installations.  I used to work in development, review, and approval of Design Drawings, calculations, and issuance of Tender Documents & Shop Drawings creation/approval & Preparation of BOQ’s, Material Submittals, Change orders, Site Sketches, RFI’s, Value Engineering and RFI’s, and all design/engineering related issues. In additions to skills of engineering team management, and client management.  Sincerely, Hany Abdelfatah Ahmed 

CV_Senior Mechanical Engineer

Embed Size (px)

Citation preview

Page 1: CV_Senior Mechanical Engineer

1/7

 

Hany Abdelfatah Ahmed Senior Mechanical Engineer

 

Cell #1: +966‐564‐541‐849   Email #1 : [email protected]

Cell #2: +966‐596‐081‐407 Email #2 : [email protected] 

Date of Birth: May, 30th 1979 

Qualifications: 

B.SC Mechanical  Engineering 

Mechanical Power Division 

Faculty of Engineering  

Cairo University‐ 2001   

Grade:  

Very Good with Honor Degree 

Current Location: 

Al‐Khobar – Eastern District  

Saudi Arabia 

Professional Affiliates: 

Egypt & Saudi Syndicate of 

Engineers 

Nationality : Egyptian 

Marital Status : Married 

Language: Arabic, English 

Skills: 

Excellent Coordination skills  

Excellent Communication skills 

Leadership personality 

Hard worker, self‐motivated, 

multi task personality 

working with team spirit 

willing to learn and improve 

Listening and Analyzing  

Research abilities, writing 

effective reports and seeking 

relevant information  

Computer Skills: 

Sprinkler Hydraulic Calculation 

Software Program (Elite). 

AutoCAD, MS Office, Design 

Spreadsheets 

Dear Sir, 

Please find herein after a brief about my professional experience. 

I am graduated from the Faculty of Engineering, Cairo University, Mechanical 

Power Department 2001 (Very Good With Honor Degree).  

I have 14 years of experience in mechanical design and contracting technical 

office for Building & High Rise construction.  

I worked as a Designer for Dar Al‐Handasah (Shair and Partners) Cairo Core 

Team, Al‐Estishareyoon Zohair Fayez & Partnership (ZFP) Cairo Office, and 

GHD global international, Cairo Office, and DPME.  

I worked also as Main Contractor Technical Office Leader in Saudi Oger ltd in a 

major project under ARAMCO supervision using ARAMCO standards.  

During my professional experience I worked in major large scale building 

construction projects; for example: ‐ Jabal Alkal'a (Abraj Albeit) Makkah, KSA 

‐ Facility Management Buildings in Pearl, Qatar with Dar Al‐Handasah ‐ King 

Abdulaziz Center for World Culture Dhahran, KSA with Saudi Oger ‐ JIMI Mall 

UAE With GHD. Faculty of Education Taibah University Medina KSA with ZFP.  

 

My work experience is extended to Plumbing Systems using all international 

codes (UPC ‐ NPC –ASPE – BS ‐ Aramco Standard (SAES)) ‐ Fire Protection 

Systems according to NFPA ‐ Irrigations Systems – Pump Station ‐ Swimming 

Pools – Water Fountains ‐ LPG System ‐ ‐ Medical Gases ‐ External networks 

for towns and compounds … etc. 

In addition to general experience about HVAC systems & Installations.

 

I used to work in development, review, and approval of Design Drawings, 

calculations, and issuance of Tender Documents & Shop Drawings 

creation/approval & Preparation of BOQ’s, Material Submittals, Change 

orders, Site Sketches, RFI’s, Value Engineering and RFI’s, and all 

design/engineering related issues. In additions to skills of engineering team 

management, and client management. 

 

Sincerely, Hany Abdelfatah Ahmed  

Page 2: CV_Senior Mechanical Engineer

2/7

DETAILED WORKING EXPERIENCE  

1‐ Saudi Oger Ltd,– KSA  A leading main contractor in KSA  From 09/04/2008 until present 

 

1.1‐ King Abdulaziz Center for World Culture “KACWC” in Al‐Dhahran – Eastern District‐

KSA (13/06/2010 till the moment)  

Center of Knowledge and culture includes an Auditorium, Library, Cinema Hall, 18 floors Tower, energy center, and 

museum. The owner is Saudi Arabian oil Company (ARAMCO). 

An innovative Architecture design from SNOHETTA (Norwegian office) and structural/electromechanical design by 

BURO HAPPOLD (UK office). 

 

The main task is preparation of the following: ‐ 

a. General concept 

b. Study of IFC Tender documents from the designer. 

c. Tender design review and evaluation and preparation of redesign where applicable. 

d. Preparation of tender forms for subcontractors. 

e. Evaluation of subcontractors offers 

f. Preparation of  Shop drawings 

g. Preparation of Calculations Sheets 

h. Preparation of Design Drawings of the delegated items. 

i. Preparation of material submittals  

j. Preparation of change orders. 

         

1.2‐ Construction of GSE (Ground Service Equipment) Tunnel in KAIA (King Abdulaziz 

International Airport) Jeddah KSA. (01/08/2009 to 12/06/2010) The main task is preparation of the following: ‐ 

1.3‐ General concept. 

1.4‐ Tender documents for subcontractors 

1.5‐ Evaluation of subcontractors offers 

1.6‐ Execution (Shop drawings) 

1.7‐ Calculations 

 

 

Page 3: CV_Senior Mechanical Engineer

3/7

1.3‐ Renovation of existing King Abdullah International Convention Center Project in 

Jeddah district. (09/04/2008 to 12/06/2010) An existing 20 floors hotel tower above a two floors podium of 60,000 m2. The building has been constructed from 

30 years. Renovation of some areas is required. 

The main task is preparation of the following: ‐ 

1.4‐ General concept 

1.5‐ Tender documents for subcontractors 

1.6‐ Evaluation of subcontractors offers 

1.7‐ Execution (Shop drawings) 

1.8‐ Calculations 

1.9‐ Material submittals  

 

2‐ Dar Al‐Handasah (Shair & Partners), Cairo Office From 01/03/2007 until 01/04/2008. 

Providing consulting services that mainly design & supervising on the execution of the following selected projects: ‐ 

 

2.1‐ Jabal Alkal'a (Abraj Albeit) Makkah, K.S.A. Review and approval of plumbing and fire protection shop drawings 

Review and approval of material submittals 

  

2.2‐ Toilet Block around Makkah Haram, Makkah, K.S.A. 4 Huge public toilet blocks (944 Asiatic water closets in one toilet block) 

Preparation of plumbing design and sewage/waste water pumping stations from A to Z 

 

2.3‐ Burj Albaher Complex, Tripoli, Libya. Three towers (Hotel, Residential, and Office) about 80m 

height, with common podium.  

Preparation of Design drawings for all plumbing and fire 

protection systems. 

 

 

 

 

Page 4: CV_Senior Mechanical Engineer

4/7

2.4‐ Tunnels Storm water pumping station, Muzdalifah, K.S.A Designing of pump station with storm water collecting tank and dry pit pumps.  

 

2.5‐ Facility Management Buildings in Pearl, Qatar. Communication building, medical center, fire station, main laundry and warehouse. 

Preparation of design drawings for water supply and drainage systems, fire sprinklers/FM‐200 system, steam boiler, 

fuel oil tanks, medical gases network, LPG network. 

 

   

 

3‐ GHD global international, Cairo Office From 01/01/2007 till 28/02/2007. 

 

3.1‐ JIMI Mall, Abu Dhabi (UAE) With ALDAR PROPERTIES Preparation of design drawings for plumbing and fire fighting systems 

 

  

4‐ AL‐ESTISHAREYOON Zohair Fayez & Partnership (ZFP) Cairo Office From 26/08/2006 till 31/12/2006 

 

4.1‐ Medical Center Expansion in Jubail & Yanbu K.S.A  Under Supervision of Royal Commission of Jubail & Yanbu 

Preparation of design drawings for plumbing, firefighting and medical gases systems 

 

4.2‐ Faculty of Education Taibah University, Medina K.S.A. Prepare of design drawings for plumbing and firefighting systems) 

 

Page 5: CV_Senior Mechanical Engineer

5/7

5‐ (DPME) Design & Project Management Engineering Co. in Giza – Egypt  

From 26/11/2002 till 25/08/2006 in Cairo head office, Design Department. 

And in Qatar branch from 23/04/2005 till 08/07/2005 and from 19/11/2005 till 09/02/2006. 

In this office I designed tens of projects, Here are some selective projects: ‐ 

 

5.1‐ First industrial zone in Suez for Suez industrial development co. (part of Orascom) Preparation of design works and profiles for water supply, fire protection, storm water, Sewage networks. 

 

5.2‐ Al Areen Residential Tower, Dafna, Doha, Qatar  2 basement + ground + 34 typical floors 

Preparation of Shop Drawings for plumbing and fire protection systems for JETTCO Company. 

 

5.3‐ Al Za’abi Residential Tower, Dafna, Doha, Qatar  2 basement + ground + 32 typical floors 

Preparation of plumbing and firefighting Shop Drawings for plumbing and fire protection systems for COMMODOR 

Qatar Contracting Company. 

 

5.4‐ 90th street main Road Tunnels in Altajamoa Alkhames – Egypt Preparation of design works for fire protection and pumping station with Muharram Bakhoum Consultant Office. 

 

5.5‐ Al Rabwah‐2 mall (50’000 m2) in Al Riyadh‐K.S.A Preparation of design works for pluming and fire protection systems for Al‐Othayem Group 

 

5.6‐ MAC Textile Factory, Egypt. Preparation of design drawings for fire sprinklers, stand pipe, CO2, pump station and fire water storage tank.  

Page 6: CV_Senior Mechanical Engineer

6/7

In addition; site supervision on the execution and testing the networks. 

 

 

5.7‐ conference building (dream land):  Preparation of design drawings for plumbing & fire sprinklers, stand pipe, pump station and fire water storage tank.  

In addition; site supervision on the execution and testing the networks. 

5.8‐ SPA building  (dream land): Design & supervision of plumbing installations  

5.9‐ Morgan palace (Saudi Arabia): Preparation of design drawings for plumbing works. 

5.10‐ Al‐Essaiy villa (Saudi Arabia) – (8‐ villa): Preparation of design drawings for plumbing works. 

5.11‐ Jeddah Hospital & Medical clinic (Saudi Arabia): Preparation of design drawings for plumbing & firefighting works including BOQ, specification & calculation note. 

Getting approval from the client consultant  

 

5.12‐ Ain‐Shams Hospital (delivery rooms): Modification of plumbing installations and rerouting of existing services and adding medical gases system. 

 

5.13‐ Teachers Syndicate Hospital (ALSHARQIA): Preparation of design drawings for plumbing & firefighting works including BOQ, specification & calculation note. 

Getting approval from the client consultant  

 

5.14‐ VACSEERA Hospital (virus building): Design & coordination of plumbing works including steam network. 

 

5.15‐ Testing Laborite of Egyptian Committee for Import & Export Supervision/Aswan & 

Portsaid Preparation of design drawings for plumbing & firefighting works including BOQ, specification & calculation note. 

Getting approval from the client consultant  

 

5.16‐ Misr Insurance company building : Preparation of design drawings for plumbing & firefighting works including BOQ, specification & calculation note. 

Getting approval from the client consultant  

 

5.17‐ Minia AlQamh Mall  (ALSHARQIA): Preparation of design drawings for plumbing & firefighting works including BOQ, specification & calculation note. 

Getting approval from the client consultant  

 

5.18‐ Sayed Darwish Theater   (Alexandria): Redesign & Supervision of firefighting installations (sprinklers & FM‐200) 

 

Page 7: CV_Senior Mechanical Engineer

7/7

5.19‐ Hamza company building : Preparation of design drawings for plumbing & firefighting works including BOQ, specification & calculation note. 

 

5.20‐ Misr Insurance company building : Preparation of design drawings for plumbing & firefighting works including BOQ, specification & calculation note. 

Getting approval from the client consultant  

 

5.21‐ CIB Bank AL ASHRAF building branch – Cairo: Preparation of design drawings for plumbing & firefighting works including BOQ, specification & calculation note. 

Getting approval from the client consultant  

 

5.22‐ SALEH ELRASHED Hotel – ALMADINA‐ KSA: Preparation of design drawings for plumbing & firefighting works including BOQ, specification & calculation note. 

Getting approval from the client consultant  

 

5.23‐ ALMENIA MUISIUM – EGYPT:  Preparation of design drawings for plumbing & firefighting works including BOQ, specification & calculation note. 

Getting approval from the client consultant  

 

5.24‐ PORT SAID THEATER: Preparation of design drawings for plumbing & firefighting works including BOQ, specification & calculation note. 

Getting approval from the client consultant  

5.25‐ ALFASHN HOSPITAL:  Preparation of design drawings for plumbing & firefighting works including BOQ, specification & calculation note. 

Getting approval from the client consultant  

 

5.26‐ Hilton Extension Dream Land Supervision on all plumbing, firefighting, pump station system. 

 

5.27‐ Hurgada Paradise Hotel Supervision on all plumbing, firefighting, pump station system. 

 

Page 8: CV_Senior Mechanical Engineer
Page 9: CV_Senior Mechanical Engineer

Scanned by CamScanner

Page 10: CV_Senior Mechanical Engineer

Scanned by CamScanner

Page 11: CV_Senior Mechanical Engineer

Scanned by CamScanner

Page 12: CV_Senior Mechanical Engineer