Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Poartable D-Star Hot-Spot BuildClear pi caasDVMEGA RPI Dual band radio is a radio module that fits without a modem or node adapter directly on the Raspberry PI. The combination RPI and RPI DVMEGA radio is a complete D-Star compatible hotspot with an output power of 10mW. The DVMEGA RPI radio comes with firmware and is ready for use. There are 2 radio's available, configured to operate in the VHF and UHF band.- Fits on Raspberry PI version A and B- Dual band VHF / UHF radio- 10 mW output power- SMA antenna connector- Complete assembled- Ready to use, firmware is pre-loadedAbout $188.00 from http://www.dvmega.auria.nl/Winkel.html
Either a Raspberry Pi 2B+ will need an external WiFi adaptor if carrying portable which can be found on eBay ( EEEKit for Raspberry Pi B+/2 Model B/Pi,Wireless Wifi/Bluetooth Dongle Receiver $12.00) or a Raspberry Pi 3B which has built-in WiFi & Bluetooth. Raspberry cost roughly around $40.00
Raspberry Pi 2 B+ Raspberry Pi 3
Poartable D-Star Hot-Spot Build
Any Case of your choosing will work with modifications for the antenna port. I used this case which I found on eBay. Price Range between $1.78 - $10.00.
Micro Sd card 4GB to 32GB Class 10.
A Standard SMA male antenna. The antenna off the UV8D works great.
Poartable D-Star Hot-Spot BuildWiFi Adaptor fo the Pi 2B+
EEEKit for Raspberry Pi B+/2 Model B/Pi,Wireless Wifi/Bluetooth Dongle Receiver
About 12.00 on Ebay
Image List..
Western D-Star Image
The latest D-Star image from http://www.westerndstar.co.uk/html/downloads.html which is currently Jessie-based D-Star Widget image Version B,V2 and V3 Compatible
D-Star Commander Image
Best image.
Supports Pi 2b+ & Pi 3
http://w6kd.boards.net/thread/2/dstar-commander-public-release-download
Maryland D-Star Image
Currently supports Pi 2b+
http://www.maryland-dstar.org/html/raspiberry.html
Poartable D-Star Hot-Spot Build