Diesel Pile Hammer
Corporate Offices:3101 New Haven Ave.Fort Wayne IN 46803Ph: 219
424 0405800 348 1890Fax: 219 422 2040email: [email protected]
Call Your HMC R e p r e s e n t a t i v eFor More
Information
800.348.1890www.hmc-us.com
Vertical or
batter piling
APE Diesel pile hammers are tough.
Based on extensive experience and construc-tion know-how,
constant improvements withregard to design and manufacturing,
APEDiesel pile hammers are the most productiveand reliable
availabe.APE Diesel pile hammers are both ram andpower plant. They
do not require an additionalpower source. APE Diesel pile hammers
areunbeatable with regard to minimum wear and lownumber of parts to
wear. They have no pistonrods, no crankshaft, no cams or
bearings.APE Diesel pile hammers are reliable andalways ready to
operate in variable climates andproducing the highest energy
transfer.For demanding pile driving projects the APEis the diesel
pile hammer of choice.
D46-32
Technical DataMaximum
batter.....................................................1:3 |
1:1Piston
weight........................................................10,143
lbsEnergy per blow: max / min (Adjustable)...107,177/52,260
ft.lbsBlows per minute: min /
max..........................................37/53Consumption:
Diesel fuel........................................4.23
gal/hrConsumption: Lubrication
oil.................................0.61 gal/hrCapacity: Diesel
fuel.............................................23.51 galCapacity:
Lubrication oil......................................4.49
galOperating wt.: Hammer.....................18,720 | 19,580
lbs
Operating wt.: Tripping device..............882 lbsOperating
wt.: Tool box........220 lbs
Dimensions (in)a Length
overall......................................208.1a1 Length over
cylinder extension..............247.4b Impact block
diameter..................................27.2
c Width over
bolts..............................................34.6
d Hammer width
overall.....................................28.3
e Width for guiding-face to face.........................25.2f
Hammer center to pump guard.......................17.9g Hammer
center to bolt center.......................10.8h Hammer depth
overall..............................31.6
H Minimum clearance for leads................19.7
a a1
b
