Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
D5000 & InfoSAP Creator TRICKS AND TIPS
2. Login into the D5000 WEB PAGE (User Name & Password) Page 2
3. Factory reset (Hardware) Page 2
4. Hidden Menu Page 2
5. Finding and Uploading Page 3
6. Updating Firmware Page 3
7. Altering the Start-up Image Page 3
8. Updating/Uploading Content Page 4/5
9. Direct LAN Connect Page 6/7
10. Standard Output at shipping Page 8
11. Special Ticker and Clock Fonts Page 8
12. FTP Uploads Page 9
13. CD Content (Start-up) Page 9
14. Questions and answers Page 11
15. Video Streaming Page 11/12
16. Proxy Server issues Page 11/13
17. Hardware Toggle Switch “Change default Video Output” Page 13/14
2 | P a g e
2: Login into the D5000 WEB PAGE (User Name & Password)
User Name: default
Password: 0000
3: Factory reset (Hardware)
Unplug your D5000 and then press the green button on the back and keep pressed in, then power up and
keep the green button pressed... you will see the Green LED will flash to Red and go back to Green, once
this happens you can stop pressing the green button. (See Reset button below)
Once the factory reset is done you will need to update:
Time and date (Reset to your local time and date)
Network (Set to DHCP (Default) or (Static IP address)
Video Out (VGA 1024 x 768 Default)
The D5000 will revert to DVI-I (VGA “XGA” 1024 x 768) (Default) so good to have a DVI-I to VGA cable
plugged in. Also, if your player is set to DHCP (Default) then just add to a network and change using the
player’s web page. (Login details above)
By default the players Date and Time is set to Asia time zone (Remember GMT is always (0 Zero) so if
you’re in the UK set (GMT 0) and save. Use the remote to get into the players OSD or login to the player
web page and change the Date/Time to your local date/time zone or your schedule will not play. Please
remember to save (apply) once you update.
4: Hidden Menu
Go into the players OSD menu by using the remote control, then press “Left Arrow, Right Arrow, Up Arrow,
Down Arrow and then the SET button”. Two extra options show up, UPGRADE and SYSTEM one is used for
firmware upgrade, the rest on the list you will not need in most cases. In the SYSTEM page you can also do
a factory reset and change the player’s password. Remember if you change the password and then do a
factory reset (see above) the password will revert back to 0000
Reset Button LED
3 | P a g e
5: Finding and Uploading
Remember to check your firewall settings, you can either turn off or open a port for the player. If you’re
using Windows XP you will also need to click “My Network Places” and click Unhide icons for network UPnP
devices. If this is set to “hide icons for network UPnP devices” then just leave alone. In Vista or Windows 7
you do not need to do the above as it’s already done for you.
6: Updating Firmware
This can be done in 3 ways, USB, Direct over LAN or by copying into the SD CARDS root.
USB
First copy the latest firmware onto a USB Stick, put the USB into the back of your D5000 and do a reboot,
go into the players OSD and then into the hidden menu outlined above.
Go to UPGRAGE and then click System Driver by pressing the SET button. You should then see the firmware
name show up on the right window “click this” and upload. The player will restart once the upload is
complete so please don’t power off until this is done.
Direct over LAN
This is the easiest way to upgrade the firmware by using the players’ internal web page. Just login as
outlined above Login into the D5000 WEB PAGE (User Name & Password) and click Upgrade on the top
menu, then click System Driver and browse for the file and click Upgrade. Please remember not to power-
off your player when the upgrade is taking place.
SD CARD
Just copy the new System Driver on to the root of your SD CARD making sure you first delete the old one.
The file would look something like this “lip-ds-player_V9.21_20090727.img” the last 8 digits are a date
stamp so you know when it was released. (SD CARD format is FAT32)
7: Altering the Start-up Image
You can easy change the Start-Up image to suite your own needs i.e. company logo or picture. The file you
need to change is held in the config directory on your SD CARD. This file is called logo. The default file size
is “1360 x 768” but if your panel is say 1280 x 1024 then set your image to the size of your panel/screen.
The file format must be .PNG and saved back into the “config” directory and also must be called logo i.e.
logo.png
When you next re-start your D5000 the image will then show your logo/graphic.
Default start-up graphic
4 | P a g e
8: Updating content
Once you have made your content there are 3 ways to upload.
Direct over LAN from InfoSAP Creator
Click on the Schedule Update Button on InfoSAP’s left menu “see Image” the forth button down.
Click start on the top menu “First 4 tabs” if your player or players show up in the box then you can just
click the radio button to highlight which player or players you wish to upload too. You can also get into
the players Web Page if you wish by clicking this icon then all you need do is browse for your .SHE
file using the drop down button and then click the upload button.
As the Upload takes place you will see this as shows the update status and once done
the player will re-start.
SD CARD DIRECT
You can also update your content direct by SD CARD, all you need do is copy all your content and XML plus
SHE file to the media folder on your CARD.
Upload
Browse Player
List
Start
Schedule Upload
5 | P a g e
File layout: (media folder)
Make sure first you delete all content within the SD CARDS “media” folder before you copy the new files.
Then insert the SD CARD and power-on your D5000.
As long as the schedule is set correct then the player will start to play your new content. If your D5000
does not play your project then check the date and time on the player, it may be out of sync with your
schedule.
USB (DIRECT)
Please use the following steps:
1. Make a folder called “media” in the root director of your USB.
2. Put the new content you want to update in the media folder of the USB.
3. Makes the D5000 is running then plug in the USB
4. Wait a few seconds and you should see a message pop up and saying “A content folder is found in USB
memory”. Press the Remote “SET BUTTON” if you want to update the content in SD card with the new one on
your USB, or press EXIT to stop.
5. Press remotes “SET BUTTON” to update content and please wait for a minute; the updating time depends on
the size of the new content.
6 | P a g e
9: Direct LAN Connect
You can connect directly to a D5000 by LAN just using a standard RJ45 LAN cable so no need for a router.
Set your PC/Laptop NETWORK to a STATIC IP ADDRESS (see below if you’re using XP)
Then setup the D5000 with a STATIC ADDRESS as below.
The above is the same for Windows Vista and Windows 7 but the layout will look different.
7 | P a g e
You will notice the IP ADDRESS’s are almost the same accept the last 3 digits i.e. PC/LAPTOP is
192.168.11.250 and D5000 is 192.168.11.251. All you now need to do is open Internet Explorer on your
Laptop/PC and type in 192.168.11.251 then the D5000’s web page will show up. Add the user name and
password as outlined above (1: Login into the D5000 WEB PAGE (User Name & Password).
Remember to switch your laptop back to “Obtain an IP address automatically” and also the D5000 to
DHCP if you need RSS or Internet access.
VIDEO OUT SETTINGS
The easiest way to change the video output is to log into the D5000 via its on-board web page “see above”
from this page you can set all the resolutions from VGA to Digital Video. If you use a DVI to HDMI cable or
Adapter you should pick Digital Video as this also provides audio (Good for a TV panel)
8 | P a g e
10: Standard Video Output at Shipping
The D5000 is set for VGA (XGA) on boot up so you will need a (DVI-I to VGA Cable) or (DVI-I to VGA Adapter
(supplied) and a VGA to VGA cable) to first get your D5000 playing on a panel or projector. You can change
the video output easily in the players OSD or by connecting to your LAN and using the players WEBPAGE
menu as the D5000’s standard LAN setup is DHCP. Please also check “Hardware Toggle Switch to Change
Video Output” on page (17) if you don’t have the correct cable or adapter ready to hand.
11: Special Ticker and Clock Fonts
InfoSAP can use SPECIAL character fonts for local languages if needed like Russian and Chinese, in some
cases you will need to add the special font to your ticker or clock for the character to show up.
To do this, please look at the image below:
When you save your schedule InfoSAP will also save any fonts and upload them to your D5000 in the same
folder as your content.
Note: Windows fonts are held in the Windows font folder so you need to copy from this folder to your work folder before you
can use.
Special Fonts
9 | P a g e
12: FTP Uploads
The D5000 can download from an FTP site automatically; all you need do is first have an FTP site setup on
your server. I suggest if you don’t have one then you ask your MIS or whoever looks after your network to
set up for you as it’s not for the fainthearted. A black art for sure, but if you’re an expert then all you need
do is:
On InfoSAP’s Schedule Update TAB you will see “Set Auto Update Parameters” see below image
Click the radio button to select with players or groups and then set Daily Checking Time in the right hand
box. As long as you upload a Schedule on to your FTP the player will find and pull the Schedule from the
FTP at the time you set. Good for overnight uploads if you have large content and also many players.
Add your FTP IP address in the next box “you do not need to add ftp:// as already done so just
192.168.11.250” if your content is in a sub directory say TEST then you will need to also add this to your
address i.e. 192.168.11.250/TEST (This is a sample address just for reference)
Add your User name and Password and then press SET. Remember to select the player or players and
groups you need to send schedules too in the device list.
You can put the player in standby and it will go on while the upload takes place and the go back to standby.
13: What’s on the CD?
The D5000 comes with a CD and this has all the files to get you started. All you need is a SD Card and then
copy the contents for the folder “System Driver” directly over to your SD Card i.e. “lib-ds-
player_V8.17.6_xxxx and the “media” folder. Insert the SD CARD and power on the player. As long as the
Date and Time are set correctly then the player should start.
InfoSAP (Design Software) V3.0 Build010 should also be installed. There are updated versions of both
InfoSAP (V3.3 Build004) and the System Driver on our web server so you should down load when you get a
chance. If you do download the latest version you do not need to uninstall the older version before
10 | P a g e
installing the later version this will be done for you. The latest System Driver can just be uploaded to the
player or copied to your SD Card as outlined in item 5: Updating Firmware above.
REGESTER your player and get the LATEST InfoSAP Creator and software Serial at:
http://www.optoma.co.uk/dsMPdetails.aspx?PC=SignShow D5000&PTypeDB=ds
See below on how to register:
Note: If you have not registered before please select the correct button i.e. “I have not registered before”
Click
Click
Click
11 | P a g e
14: Questions and answers
MS POWERPOINT – the D5000 cannot play MS PowerPoint in its standard format, but you can save
PowerPoint slides in a PNG or JPEG format and then play them back from a USB or within a zone in
InfoSAP. You can also convert a PowerPoint Presentations into an AVI or MPEG4 file format and
also play in a zone.
Can you run 2 different schedules (Projects) on one box – NO you cannot. You can have a number
of screens linked to one box but showing the same schedule, this can be done via a video splitter.
Can you have InfoSAP software on more than one PC/Laptop for one box: YES, various segments of the
software can also be locked down with administrator rights?
Does the D5000 have a TV tuner: NO but you can connect a Freeview/Sky or CCT into the box via the S-Video
input and it will show in the OUTSOURCE zone.
The D5000 does not play HTML (Web pages)
15: Video Streaming
Please carefully note the spec regarding video streaming function of D5000: The IP range of multicast is from 224.0.0.0 to 239.255.255.255. D5000 supports the following codec:
Video: MPEG1, MPEG2 Audio: AC3, MPEG Layer 1/2/3
How to set video streaming configuration in OSD menu (Network Streaming Mode) Use the remote to get into the players OSD menu, select PLAY MODE, select Network Streaming, you will see the IP and port configuration show up. Enter the same IP and Port as the Streaming server setting above, select Apply.
12 | P a g e
Your Stream should show on your panel or monitor. Within InfoSAP Creator you also need to setup a zone (VS) and also set the IP and PORT address for this zone. (See image below)
16: Proxy Server issues
In some cases a Proxy Server is used so there are some setup points that need to be covered. A proxy
server is used by most schools and collages so if you’re selling into education or are an education user
please read this part.
Within the D5000’s Network OSD or Web Page there is a Proxy setup setting. You’re Proxy IP and Port
address needs to be added if you need the D5000 to get information like an RSS feed from the Internet or
even upload your content.
Also, within IE or the web browser you’re using under (Microsoft IE) Tools, Internet Options, LAN Settings
you can also see a Proxy server setup.
You also need to set an Exception using “DigitalSignateTools.exe; and the players IP address (Sample
Address Used) See Image below:
NOTE: Having this setting enabled within your browser and not in the players Network OSD will stop you
being able to upload to the player over LAN.
13 | P a g e
Sample proxy settings
17: Hardware Toggle Switch to Change Video Output
The purpose is to simply change output between VGA 1024 x 768 and DVI 1024 x 768 by pressing the green button
(RESET button) on the back of the D5000.
Sometimes, when you take out your D5000, you may not know which output is set. So you may just pick a VGA cable,
plug it in the D5000 and power on; in this case if the current output is DVI then you will get a black screen.
With Firmware V9.35 or above, you can just press the green button (as Pic1) then the D5000 will change output from
current output to the next. In the case above the D5000 will change output to VGA from DVI.
14 | P a g e
Change output
(Click green button)
LED response
(Around 30 seconds)
Done
From DVI or HDMI into VGA Flashing Green Green
From VGA into DVI Flashing Orange Green
Further, you can also press and hold the green for 3 seconds button to check what video output is set.
When you press and hold the green button for 3 seconds:
If the current output is VGA, the LED will flash green once. If the current output is DVI or HDMI, the LED will flash orange once. This function just tells you what output it is currently; it will not make any changes to the output.
Check current output (Press and Hold
green button for 3 seconds)
LED response Done
From DVI or HDMI into VGA Flashing Green for once Green
From VGA into DVI Flashing Orange for once Green
The above does not change the factory reset function as this remains as “Power off” Press in the Green Button and keep pressed in and do a “Power on”.
Green Button LED
Pic1