Darwin Appren�ceship OpportunityCPC30211 Cer�ficate III in Carpentry

Posi�on Informa�on

Loca�on This posi�on is based in Darwin.

Descrip�onGTNT are now recrui�ng for a Carpentry Appren�ce to work with one of our Host Businesses in Darwin. This fantas�c opportunity is offering a CPC30211 Cer�ficate III in Carpentry with full �me paid employment.

Work HoursThis posi�on is full �me, working 38 hours per week.

To be successful in this role, you will have/be- Prepared to work 38 hours outside on a worksite- Willing to commit to four (4) years of training- Hold your White Card- A Drivers licence and own transport- Reliable and punctual

Qualifica�on Informa�on

Type This qualifica�on is an Appren�ceship.

Na�onal Qualficaiton NameCPC30211 Cer�ficate III in Carpentry.

Qualifica�on Descrip�onThis qualifica�on provides a trade outcome in carpentry, covering work in residen�al and commercial applica�ons. Occupa�onal �tles may include - Carpenter or Carpenter and joiner.

Nominal Dura�onThis qualificaion has a set nominal dura�on of 48 months. This is the amount of time you need to be committed to, for successful completion of this qualification

Nominal HoursThis qualifica�on has a set nominal hours of 1170.

To apply, please visit our website - www.gtnt.com.au For more informa�on, email our team recruitment@gtnt.com.au or call us on (08) 8980 0600

GTNT 'Creating Territory Futures Through Apprenticeships'

To apply, please visit our website - www.gtnt.com.au For more informa�on, email our team recruitment@gtnt.com.au or call us on (08) 8980 0600

GTNT 'Creating Territory Futures Through Apprenticeships'

Darwin Traineeship OpportunityBSB30115 Cer�ficate III in BusinessDarwin Appren�ceship OpportunityCPC30211 Cer�ficate III in Carpentry

Program Content

This qualifica�on provides a trade outcome in carpentry, covering work in residen�al and commercial applica�ons. This course will include all aspects of the building industry including, but not restricted to, site work, concre�ng, framing and finishing works.

To achieve a Cer�ficate III in Carpentry a total of thirty (30) units of competency must be completed. This comprises twenty two (22) core units of competency and eight (8) elec�ve units of competency (as outlined below).

RTOThe training will be delivered by Charles Darwin University (CDU).

Study ModeThe delivery mode for this qualifica�on will be via block training based at the CDU Casuarina Campus.

Further Study and Career PathwaysA�er achieving the Cer�ficate III in Carpentry students may undertake various courses of study to advance their career, such as, Cer�ficate IV in Building and/or Cer�ficate IV in Project Management.

Core and Elec�ve Units listed on next page

Core and Elec�ve Units include

Unit Code Unit Name

CPCCCA2002B Use carpentry tools and equipment CPCCCA2011A Handle carpentry materialsCPCCCA3001A Carry out general demoli�on of minor building structuresCPCCCA3002A Carry out se�ng outCPCCCA3003A Install flooring systems CPCCCA3004A Construct wall frames CPCCCA3005B Construct ceiling frames CPCCCA3006B Erect roof trusses CPCCCA3007C Construct pitched roofs CPCCCA3008B Construct eavesCPCCCA3023A Carry out levelling opera�onsCPCCCM1012A Work effec�vely and sustainably in the construc�on industryCPCCCM1013A Plan and organise workCPCCCM1014A Conduct workplace communica�onCPCCCM1015A Carry out measurements and calcula�ons CPCCCM2001A Read and interpret plans and specifica�ons CPCCCM2002A Carry out excava�on CPCCCM2007B Use explosive power tools CPCCCM2008B Erect and dismantle restricted height scaffolding CPCCCM2010B Work safely at heights CPCCCO2013A Carry out concre�ng to simple forms CPCCOHS2001A Apply OHS requirements, policies and procedures in the construc�on industry

CPCCCA2003A Erect and dismantle formwork for foo�ngs and slabs on groundCPCCCA3010A Install and replace windows and doorsCPCCCA3012A Frame and fit wet area fixturesCPCCCA3013A Install lining, panelling and mouldingCPCCCA3016A Construct �mber external stairsCPCCCA3017B Install exterior claddingCPCCCM3001C Operate elevated work pla�ormsCPCCCA3019A Erect and dismantle formwork to suspended slabs, columns, beams and walls

To apply, please visit our website - www.gtnt.com.au For more informa�on, email our team recruitment@gtnt.com.au or call us on (08) 8980 0600

GTNT 'Creating Territory Futures Through Apprenticeships'

Darwin Traineeship OpportunityBSB30115 Cer�ficate III in BusinessDarwin Appren�ceship OpportunityCPC30211 Cer�ficate III in Carpentry