Upload
nguyenphuc
View
252
Download
3
Embed Size (px)
Citation preview
Technical Datasheet
MPP Film Power Capacitors (Box) Item Number : VAC070812 Construction
� Dielectric: Metallized Polypropylene film
� Electrode: Metallized Film
� Connection:∆
� External Discharge device: Resistor
� Encapsulation: Liquid resin / Dry resin
� MS Container : Powder Coated
� RoHS Compliant
Terminals:
� Tin Plated Brass terminals.
Typical Applications: � For Industrial Power factor correction applications
Features: � Conforms to IEC 60831-1+2:1996
� Bureau of Indian Standards License No.CM/L 6700260
� Low dissipation factor
� High insulation resistance
� NPCB(Non- polychlorinated biphenyl) compliant
Safety:
� Over pressure disconnector ( Burst Proof)
� Self-healing properties
� Protection: IP 40 with top cover
� Discharge Device
Installation Features:
� Indoor, Vertically mounted
� Clamps for earthing and Mounting"
Marking / Identification Label � Viz logo � 3 Phase
� Rated voltage
� Rated Current
� SH- MPP
� Discharge Device :
� Date of Manufacture
Technical Datasheet
(Box) Burst Proof Design
1
olypropylene film
External Discharge device: Resistor
/ Dry resin
Power factor correction applications
:1996 & IS 13340:1993
of Indian Standards License No.CM/L 6700260
polychlorinated biphenyl) compliant
Over pressure disconnector ( Burst Proof)
Clamps for earthing and Mounting"
Rated Frequency
Serial number
Rated Kvar
Rated Current ∆ Connection
ISI Mark
Over pressure Disconnector ≠
Design
Technical Datasheet
MPP Film Power Capacitors (Box) Burst Proof Design
2
Delivery Mode:
� Single stacking arranged Packing
Electrical Characteristics:
� Reference Standard : IEC:60831-1+2 & IS:13340/41
� Rated Kvar : 1KVAr To 50 KVAr
� No of Phases : 1Ø and 3Ø
� Capacitance tolerance : -5 To + 10 %
� Rated voltage VR : 250Vac To 660Vac
� Inrush current I : Up to 150* IR
� Over Voltage Vmax : VR *1.1 Continuos
� Over Current I max : Up to 1.5 * IR
� Rated Frequency FR : 50 / 60 Hz
� AC test Voltage terminal to terminal : 2.15 x VR ,2s (Routine test) : 2.15 x VR ,60s (Type test)
� AC test Voltage terminal to can : 3 KV AC ,10s
� Discharge time : < 50 V within 60 seconds.
� Losses (tan δ) Dielectric : 0.0002 Total : 0.00045**
� Temperature Category : -10/D
Authorised by: Product Design & Development Dept Date: 07.08.2012 Viz Technologies Pvt Ltd Rev: 00
Important notes:
1. KVAr ratings and rated voltages can be customized as per customer requirement. 2. We always try hard to improve our products Quality. Thus, the products explained in this Data sheet may change from time to time. The same is true of the corresponding product specifications. 3. Please check the product descriptions and specifications mentioned in this datasheet are still applicable
before or when you place an order.
4. Ratings and container dimensions can be changed as per customer requirement
Technical Datasheet
MPP Film Power Capacitors (Box) Burst Proof Constructions: (Plastic Top)
Burst Proof Constructions: (Metallic Top)
Technical Datasheet
(Box) Burst Proof Design
3
Burst Proof Constructions: (Plastic Top)
Burst Proof Constructions: (Metallic Top)
Burst Proof Construction: Before fault operation
Burst Proof Construction: After fault operation
Internal construction: Overpressure disconnector
Internal construction: Expandeble bellow
Internal construction: MPP film with self healing propertise.
Burst Proof Construction: Before fault operation.
Burst Proof Construction: After fault operation. Capacitor failed safely with burdge top.
Contacts connected (Intact) Before fault operation.
Burst Proof Construction: After fault operation.
Design