Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
T31A
1
DATOS TÉCNICOS
POTENCIA
SERIE:
SUSTITUYE HASTA
LÚMENES TOTALES:
EFICIENCIA LUMÍNICA:
CONSUMO:
VOLTAJE:
ÍNDICE DE REP. CROM. (IRC):
FACTOR DE POTENCIA:
DISTORSIÓN ARMÓNICA (THD):
60W
T31A-2
150W
7500
125 LM/W
60W
100-277 V~ 50/60 Hz
≥ 70 ºK
0.95 RA
<15%
T31A-3
300W
15000
125 LM/W
120W
100-277 V~ 50/60 Hz
≥ 70 ºK
0.95 RA
<15%
T31A-4
600W
30000
125 LM/W
240W
100-277 V~ 50/60 Hz
≥ 70 ºK
0.95 RA
<15%
240W120W
T31A-5
750W
37500
125 LM/W
240W
100-277 V~ 50/60 Hz
≥ 70 ºK
0.95 RA
<15%
300W
3000 / 4000 / 5000 / 5700 KºTEMPERATURA DE COLOR (CCT):
* Sin fotocelda, ideal para circuitos dedicados y servicio medido.
Temperatura de Almacenamiento = - 40 C a + 50 CDiámetro de Instalación = 57 a 63 mm
vandal resistance
2
DISTRIBUCIONES LUMÍNICAS DISPONIBLES
* Usos Tipo I *
TIPO I
TIPO I: Vialidades es calles secundarias,
corredores viales, callejones, ciclovías,
Vialidades primarias con camellón
* Usos Tipo II *
TIPO II
TIPO II: Vialidades en fraccionamientos, vías
secundarias, primarias, colectoras, estacion-
amientos, accesos industriales.
INSTALACIÓN
1.Connectthegroundwire, neutralwireandlivewireto theACinput(makesureit sufficientl-ygrounded)
2.LoosenthefourM10x45 hexagon-socketheadcap screwsonthebeam.
3.Drawtheluminaryonto thepole. 4.Tightenupthescrewson thebeam
3
1.Unscrew the two M4x10 screws for the driver casing.
2.Draw the driver casing out. 3.Disconnect the driver from the wires of AC input.
4.Unscrew the waterproof connector for the driver.
7.Replace the failed driver with a new set.Tighten up the screws for driver and for the shield.
8.Re-connect the waterproof connector and to the AC input.
9.Draw the driver casing in to hang it on the beam at the groove, and fix it with screw son the beam.
5.Unscrew the four M3x6 screw son the shield of the driver casing, then remove thes hield.
6.Unscrew the screws on the back of the casing
Conector y partes eléctricasMANTENIMIENTO
4
Guía de funcionamiento de conectores
Indicativo: conector hembra #1
Indicativo: conector hembra #2
Indicativo: conector hembra #3
Indicativo: conector hembra #4
Indicativo macho
Vista frontal Vista trasera
Gire el conector macho en sentido horario. Cuando la flecha indicativa del conector macho apunte entre las flechas indicativas del conector hembra 2 y 3 siendo el espacio entre los conectores macho y hembra extremadamente pequeño, significará que los conectores se encuentran debidamente acoplados; de lo contrario, habrá riesgos en su rendimiento impermeable. Si se detectara alguna holgura entre los conectores macho y hembra, simplemente gire el terminal macho en el sentido de las agujas del reloj hasta que quede apretado.
CONEXIÓN DE CONECTORES IMPERMEABLES IP68
1) Acople los conectores macho y hembra alineando las flechas indicativas.
conector hembra
conector machoConecte los cables de los accesorios a los cables de suministro de voltaje apropiados, utilizando conectores del tamaño adecuado:
1) Conecte el cable tierra del lado suministro al cable verde del accesorio, el cable neutro del lado suministro al cable blanco del accesorio y el cable vivo del lado suministro al cable negro del accesorio.
2) Conecte el cable tierra del lado suministro al cable doble amarillo-verde del accesorio, el cable neutro del lado suministro al cable azul del accesorio y el cable vivo del lado suministro al cable marrón del accesorio.
5
DIMENSIONES
MODELO
T31A-2T31A-3T31A-4T31A-5
T31A-1T31A-2T31A-3T31A-5
394 mm474 mm554 mm674 mm
ANCHO
5.9 Kg6.9 Kg8.0 Kg10.5 Kg
PAQUETE
300 mm300 mm300 mm300 mm
87 mm87 mm87 mm87 mm
5.0 Kg5.8 Kg6.6 Kg8.8 Kg
385 mm385 mm385 mm385 mm
480 mm560 mm640 mm740 mm
165 mm165 mm165 mm165 mm
LARGO GROSOR PESO
IMÁGENES
6
GARANTÍA:
VIDA ÚTIL DEL SISTEMA:
GRADO DE PROTECCIÓN EN SISTEMA ÓPTICO:
GRADO ANTIVANDÁLICO EN SISTEMA ÓPTICO:
GRADO DE PROTECCIÓN EN SISTEMA COMPLETO:
GRADO ANTIVANDÁLICO EN SISTEMA COMPLETO:
6>60000IP68IK10IP66IK09
AÑOS
HRS.
EN CARCASA
SUPRESOR DE PICOS (SPD):
PROTECCIONES DE DRIVER:
RANGO VOLTAJE DE ENTRADA:
ATENUEABLE:
PROGRAMABLE:
FORMA DE ATENUACIÓN:
FORMA DE PROGRAMACIÓN:
10CORTO CIRCUITOSOBRE VOLTAJESOBRE TEMPERATURA (100ºC)AUTO RECUPERACIÓN90 A 277SISIPWM (0-10V)INFRARROJOSERIALINFRARROJO
MATERIAL DE FABRICACIÓN CARCASA:
MÉTODO DE FABRICACIÓN DE CARCASA:
MÉTODO DE PINTURA EN CARCASA:
MATERIAL DE FABRICACIÓN SISTEMA ÓPTICO:
ALEACIÓN DE ALUMINIOINYECCIÓN DE ALUMINIOPINTURA ELECTROSTÁTICAPOLICARBONATO DE ALTA PUREZA
KV, INTEGRADO
Av. P. Roque Saenz Peña 943 1 Piso - Buenos Aires, Argentina T. +54 11 4326.0160 [email protected] www.lightledsa.com
NORMAS INTERNACIONALES