Request for Information

Page 19 of 19

DISTRICT OF COLUMBIA WATER AND SEWER AUTHORITY (DC Water)

REQUEST FOR INFORMATION

RFI Number

17-PR-PRO-22

Response Due Date and Time

April 12, 2017 2:00 EST

Date Issued

March 9, 2017

This RFI is subject to Prevailing Wages

Description

Establish a strategic materials management vendor base whose goals are aligned with DC Water

DC Water Point of Contact (POC):

Submission Instruction:

Name: Mark Stewart

Title: Sourcing Consultant

Tel: 202.787.2697

Email Address: mark.stewart2@dcwater.com

Submit your response only by Email to DC Water POC. Do not submit printed hard copies.

Timeline (Estimated)*

RFI Published/Advertised

March 9, 2017

Deadline to Submit Questions

April 7, 2017

Response Due

April 12, 2017

Estimated Vendor Selection to receive RFP(s)

April 30, 2017

* Dates may change at DC Waters convenience

TABLE OF CONTENTS

1.DC WATER INTRODUCTION3

2.DEFINITIONS4

3.PURPOSE OF THIS RFI5

3.1.DC Water the Materials Management5

3.2.Current Challenges5

3.3.New Goals5

3.4.Targeted RFP6

3.5.Spend Under Contract6

4.CONTENTS OF RFI DOCUMENT7

5.GENERAL RESPONSE INSTRUCTIONS, TERMS AND CONDITIONS8

5.1.DC Water Point of Contact (POC) and Communication:8

5.2.Response Submission Method:8

5.3.Intent to Respond8

5.4.Questions and Answers8

5.5.Date and Time for Receipt of Responses:8

5.6.Response Contents9

5.7.Evaluation and Vendor Selection9

6.ADDITIONAL RFI TERMS AND CONDITIONS10

7.CERTIFIED LOCAL/SMALL BUSINESS ENTERPRISE PROGRAM13

8.ATTACHMENT A19

9.ATTACHMENT B19

DC WATER INTRODUCTION

In 1996, the District Government initiated the creation of the District of Columbia Water and Sewer Authority (DC Water), an independent authority of the District of Columbia providing services to the region. On April 18, 1996, following a 30-day Congressional review period, the District Council enacted DC Law 11-111, "The Water and Sewer DC Water Establishment and Department of Public Works Reorganization Act of 1996."

DC Water is governed by a Board of Directors consisting of 11 principal and 11 alternate members. The Board is composed of six District of Columbia representatives, two each from Montgomery and Prince Georges counties in Maryland, and one from Fairfax County in Virginia.

At DC Water, we care about our community. We often travel throughout our city, meeting those who live or work in Washington, D.C., so we can better understand their concerns and share our latest news on neighborhood water and sewer services.

DC Water's service area is approximately 725 square miles providing retail water and wastewater (sewer) service to the District of Columbia. Additionally, DC Water provides wholesale wastewater treatment service to Montgomery and Prince George's counties in Maryland and Fairfax and Loudoun counties in Virginia.

The Blue Plains Advanced Wastewater Treatment Plant is the largest advanced wastewater treatment plant in the world, with a capacity of 370 million gallons per day (MGD), a peak capacity of 1.076 billion gallons per day and covering 150 acres.

To distribute water and support the distribution system, the DC Water operates over 1,200 miles of pipes, five pumping stations, five reservoirs, four elevated water storage tanks, 36,000 valves and more than 9,000 public hydrants.

To collect wastewater, the DC Water operates 1,800 miles of sanitary and combined sewers, 22 flow-metering stations, nine off-site wastewater pumping stations, and 16 storm water pumping stations within the District.

For more information about DC Water, please visit www.dcwater.com.

DEFINITIONS

Authorized Representative: A DC Water POC is designated as DC Waters authorized representative for the purposes of this RFI.

Contract: A definitive agreement that will be executed by DC Water and the vendor for the performance of the work requested in this RFI. The contract shall incorporate the provisions of the RFI.

DC Water: District of Columbia Water and Sewer Authority.

May: Indicates something that is not mandatory but permissible for this RFI.

Must/Shall: Indicates a mandatory requirement for this RFI. A response that fails to meet a mandatory requirement will be deemed non-responsive and may not be considered for award.

Vendor: Any person, firm, corporation, organization, agency, or a duly authorized representative that may submit a response for the work described in this RFI.

Request for Information (RFI or RFI Document): Shall mean all the contents provided in the RFI document, all attachments provided, future addendums or amendments.

Request for Proposal (RFP or RFP Document): Shall mean all the contents provided in the RFP document, all attachments provided, future addendums or amendments.

Responsive vendor: To be responsive, vendor must submit a response which conforms in all material respects to the requirements set forth in this RFI, as determined solely by DC Water.

Should: Indicates something that is recommended but not mandatory. Failure to do what "should" be done will not result in rejection of vendor response but may receive lower consideration as determined solely by DC Water.

Statement of Work (SOW): An executable document that describes all details of service to be performed by vendor. SOW is required for all services and will become a part of the contract.

Subcontractor: Any person or corporation other than vendor supplying services or materials for work described in this RFI.

Successful vendor: Vendor to whom DC Water awards a Contract.

PURPOSE OF THIS RFI

The purpose of this RFI is to identify qualified and capable firms to invite to the RFP.

1.

2.

3.

DC Water the Materials Management

DC Water Materials Management team (MM), within the Department of Procurement, was created 5 years ago and manages all water and sewer operation maintenance materials (see the list of materials in Attachment B). MM also operates two main warehouses to store these materials: Blue Plains (BP1) and Bryant St. (BS4).

Current Challenges

The annual spend on the operation maintenance materials is $7M-$8M with over 200 vendors for about 6,000 - 7,000 active parts. The average inventory value is over $10M. However, this spend was never seriously competitively sourced in the past. In many cases, we have discovered that we are paying MSRP or with very little discounts despite large purchases. We also discovered multiple shipping charges (for example, inter-warehouse shipping cost), and often shipping cost exceeds the cost of a material. Also over 200 vendors are too many vendors to properly manage with 3 buyers in the MM team. Often the price on an item changes frequently, resulting in a need to request a new price quote before each purchase, wasting valuable time to get the materials on time.

New Goals

Department of Procurement embarked on a total transformation since early 2015 to become a world-class procurement organization, including its materials management operation. Under the new MM management, MM established following strategic goals:

Achieve 100% on-time availability of material.

Achieve 99% inventory and ordering accuracy.

Improve inventory optimization by increasing inventory turnover and reducing inventory values.

Reduce shrinkage to less than 1%.

Reduce materials cost by 25%.

To achieve these goals, MM is looking to establish a strategic vendor base whose goals are aligned with DC Water and help achieve our goals. Therefore, MM would like to achieve following objectives through this RFI and subsequent RFP:

Create a strategic vendor base:

Attachment A contains almost 6,000 active parts that we purchase from over 200 vendors today. MM would like to consolidate the parts and volume and purchase from a few number of vendors who are most aligned with our objectives. This will then enable MM to invest into building stronger relationship with these vendors. These items are grouped into 25 groups. Our goals is to find at least 2 or 3 vendors (one primary and one or two backups) for each group so we can reduce supply risk, standardize supply, manage quality, effectively administer materials spend, and enter into value-added supplier partnerships.

Cost Reduction by 25% or more:

MM is seeking a minimum 25% price reduction on materials. As mentioned earlier, current materials have never been competitively sourced. Through consolidation of vendor base, a selected vendor will receive more business volume and in return offer more competitive pricing to DC Water. In addition, MM is seeking to reduce shipping and material handling costs such as free local delivery.

Establish simple price formula:

As mentioned above, many of these items are re-quoted at the time of purchase, wasting valuable time. Therefore, we are seeking vendors who can offer a simple pricing formula such as a % discount off MSRP (or web price) for all parts.

Improved spending and relationship with LBE/LSBE:

Our Local Business Enterprise (LBE) and Local Small Business Enterprise (LSBE) program information is provided in Attachment G. MM is currently spending less than 1% with LBE/LSBE and would like to improve our spending with LBE/LSBE firms and improve relationship as well.

Vendor consignment or vendor managed inventory at DC Water warehouse:

MM is also seeking to reduce the number of purchase order transactions and receiving for some common materials such as hand tools, standard hardware and materials. MM can provide a space (and security) at its warehouses for vendor consignment or vendor managed inventory and is seeking creative proposals.

Strategic Relationship Building, Account Management and Reporting

DC Water MM would like to build strategic vendor base and build strong business relationship with them. Current business is transactional without much active account management/support and reporting on purchases and spend. MM is seeking vendors who will value DC Water as the key strategic customer and provide a full suite of account management and support.

Targeted RFP

It is DC Waters intention to use the responses to this RFI to develop a narrow list of vendors to receive follow-on RFP(s). The desired outcomes of the RFP(s) include: spend more money with fewer vendors, develop deeper integration between suppliers and DC Water operations, standardize transportation and shipping, capitalize on volume spend to ensure best market prices, ensure efficient inventory levels, improve spend with LBE and LSBE [footnoteRef:1] vendors. [1: See Section 7 for details regarding DCW Certified Supplier Program]

Spend Under Contract

Going forward DC Water estimates it will spend $7-8,000,000 annually on materials per the item sample listed in 3.2 above. Our goal is to ensure that 98% of all materials spend is under contract.

CONTENTS OF RFI DOCUMENT

In general, the RFI document contains the following contents:

Main RFI Document

Cover Page: Contains important RFI information such as RFI # and name, due date, DC Water POC for this RFI, submission, and timeline.

General Response Instructions, Terms and Conditions: This section contains general instructions on how to submit a response, and terms and conditions of this RFI that each vendor must agree to in order to be considered for the opportunity.

Additional RFI Terms And Conditions: This section contains additional terms and conditions, rights, and remedies associated with this RFI.

Certified Local/Small Business Enterprise Program: This section includes the details of the DC Water Certified Supplier program and necessary forms to apply.

Attachment A

This attachment contains DC Waters business questions and instructions that must be addressed in vendors response to be considered responsive.

Attachment B

This attachment contains the technical requirements of the RFI. Vendors response must contain all required items and properly follow all instructions in this section to be considered responsive.

GENERAL RESPONSE INSTRUCTIONS, TERMS AND CONDITIONS

4.

5.

DC Water Point of Contact (POC) and Communication:

All inquiries or communications regarding procurement, general questions, clarifications, or any aspect of this RFI must be directed via email to the DC Water POC identified on the Cover page of this RFI.

No calls or correspondence or contacts shall be made to anyone other than this DC Water POC about this RFI. Any violation of this communication policy, regardless of severity, may result in the immediate elimination from consideration at the sole discretion of DC Water.

Response Submission Method:

Electronic Submission:

Unless specified on the Cover page requesting a paper response to be delivered or mailed, all response submissions must be emailed to the DC Water POC (unless other methods are provided).

Vendor must save each response document using the following naming convention:

Your company name_RFI #_Document name_mmddyy

(Example: Acme_RFI 16DRT20_Pricing Response_011316.xlsx)

If DC Water is unable to locate any part of your response because you used a different or unclear naming convention, then your response may be considered unresponsive and may be eliminated from consideration.

Email and any digital media must not contain files unrelated to this RFI and must be free from virus or other malware in order to be accepted.

Intent to Respond

If vendor is interested in submitting a response, vendor is strongly encouraged (but not required) to send a notice via email to DC Water POC by the Intent to Respond Due date to confirm vendors intention with the following information so vendor can receive timely notices/updates by DC Water POC:

Vendors Main Point of Contact throughout the RFI process (name, title, tel, email)

Questions and Answers

Questions or comments regarding the meaning or interpretation of specifications and other response documents in this RFI must be submitted via email to DC Water POC by the Deadline to Submit Questions as stated in the RFI Cover page.

Only written questions will be accepted.

Vendor questions and DC Water responses will be made available to all bidders.

Oral communications between DC Water and vendor regarding the interpretation or meaning of any aspect of this solicitation shall not be binding for any purpose.

DC Water will try to respond in a timely manner to all questions and comments that are properly submitted and deemed relevant and substantive in nature.

Date and Time for Receipt of Responses:

Submit COMPLETE responses to the DC Water POC identified on the Cover page of this RFI. COMPELTE Responses must be received by no later than the date and time specified on the Cover page of this RFI.

Partial submissions will be rejected and will not be considered.

Vendor may withdraw their response and/or submit a revised response prior to the RFI Response Due date and time. After this response deadline, vendor initiated changes will not be accepted.

Unless prior approval is received by DC Water of the notice (via email or call) by vendor explaining the circumstances that will prevent the timely submission, any late submission will be rejected.

The following reasons will not be acceptable:

Technical difficulties (i.e. internet access)

Lack of resource or out of town or vacation to prepare and submit the response on time

Traffic

Any modification of a response is subject to the same late responses and modifications of response conditions listed above.

Notwithstanding the preceding paragraphs of this provision, a late modification of an otherwise successful response, which makes its terms more favorable to the DC Water, may be considered at any time it is received and may be accepted.

A late response, late modification, or late withdrawal of offer that is not considered shall be held until after award and then retained with unsuccessful offers.

Response Contents

Please see Attachments A and B for detailed list of required contents for your response.

Evaluation and Vendor Selection

Evaluation criteria that may be used for evaluation are, but not limited to:

Ability to meet DC Waters requirements

Warranty, guarantee

Vendors financial viability

Experience and qualification

Past performances, references

Qualification of key personnel when applicable

Certifications when applicable

Preferences points for Local Business and Local Small Business Enterprise (LBE/LSBE)

DC Water reserves the right to reject any and all responses determined to be inadequate or unacceptable.

Based on RFI responses DC Water will select the finalists to receive subsequent RFP(s).

LBE and LSBE Preferences Points: DC Water encourages the use of certified local business enterprises who will receive preference points in any final RFP evaluations. For further information see Section 7 Certified Local/Small Business Enterprise Program.

ADDITIONAL RFI TERMS AND CONDITIONS

The RFI solicitation process is conducted in accordance with and subject to DC Waters procurement policies and procedures.

Any work and all costs incurred by vendors in the preparation and submission of a response shall be at the vendors own discretion and expense. DC Water will not be obligated for any vendor costs related to this RFI.

Vendors should carefully read all the requirements, instructions, and documents included in this RFI as no allowance will be made for failure to comprehend any of the requirements or conditions set forth anywhere throughout this RFI document.

Submission of a response constitutes the acknowledgement that the vendor has read and agrees to be bound by all terms in the RFI Document.

While this RFI is the product of an intensive information gathering process and has been subjected to an extensive review, DC Water makes no representations or warranties as to the accuracy of the information contained in it.

DC Water reserves the right to suspend, withdraw, or amend this RFI at any time without any obligation to any vendors.

This RFI does not represent a commitment to purchase, lease or license any product or service and does not obligate any funds by DC Water.

Amendments issued by DC Water prior to the due date shall be considered as if written into the RFI. Vendors are required to acknowledge the receipt of the same in their response. Failure to provide such an acknowledgement will result in the rejection of a response.

If vendor is in doubt as to the true meaning of any part of the specifications or other RFI documents, or finds discrepancies or omissions in the specifications, vendor may submit to DC Water a written request via email for an interpretation or correction. Vendor is responsible for prompt delivery of any requests. When DC Water considers interpretations necessary, DC Water answers will be in the form of a written amendment to the RFI document, and will be emailed to all vendors. Oral and other interpretations or clarifications shall be without legal or contractual effect.

It is the responsibility of each vendor to ensure DC Water has their correct business name, address, phone number, and email on file.

DC Water is not responsible for any information relating to any DC Water solicitation document which is not obtained directly from DC Water.

Any prospective vendor who obtained a set of RFI documents from anyone other than DC Water is responsible for advising DC Water that they have a set of RFI documents and wish to receive subsequent amendments.

The response shall represent the best efforts of the vendor and will be evaluated as such. It must set forth full, accurate, and complete information as required. Unnecessarily elaborate brochures, elaborate artwork, expensive paper and bindings, and other presentation aids are neither necessary nor desired.

CONFIDENTIALITY OF RFI DOCUMENTS. All contents of RFI documents are to be treated as proprietary and confidential information belonging to DC Water. By acceptance and delivery of this RFI, vendor agrees to hold the same in strict confidence and shall not disclose, copy, or distribute this RFI in whole or in part to persons other than the vendors employees and agents who are required by nature of their duties to receive such information. In the event that a vendor who receives this RFI is unable or unwilling to comply with these confidentiality conditions, vendor shall permanently delete the entire RFI, including any copies, and confirm in writing to DC Water that the entire RFI and any copies are permanently deleted. DC Water may, in its sole discretion, disqualify any vendor who violates the provisions of this section from participating in any future opportunity with DC Water. Vendor will not use information in this RFI or any other materials related to the business affairs or procedures of DC Water and of its affiliates for vendors advantage, other than in performance of this RFI. If vendor utilizes a business partner, the vendor may forward its business partner a copy of the RFI and the business partner is subject to this section.

CONFIDENTIALITY IN RESPONSES: Vendor shall identify portions of the response it deems to be confidential, proprietary information, or trade secrets, and provide justification why such materials shall not be disclosed by DC Water. All such materials shall be clearly indicated by stamping the pages on which such information appears, at the top and bottom thereof with the word CONFIDENTIAL or PROPRIETARY. Such materials stamped CONFIDENTIAL or PROPRIETARY must be easily separable from non-confidential sections of the response. All such materials so indicated shall be reviewed by DC Water and any decision not to honor a request for confidentiality shall be communicated in writing to the vendor. Prices, makes and model, or catalog numbers of the item offered, deliveries, and terms of the payment shall be publicly available after response opening regardless of any designation of confidentiality made by the vendor. All response documents shall be retained by the DC Water. Vendor understands that all responses submitted in response to this RFI become the property of DC Water and under the Public Records Act (Government Code 6250 et. seq.) are considered to be public records, and as such may be subject to public review. However, the responses shall not be disclosed until any negotiations are complete and a recommendation for selection and award (if appropriate) is made by DC Water.

RESPONSE CONTENT: Vendor must describe in detail how vendor will meet the requirements of this RFI, and may provide additional related information in the response. The response must be presented in a format as requested in Attachments A and B. Responses should be straightforward and concise and provide "layman" explanations of technical terms that are used. Emphasis should be concentrated on conforming to the RFI instructions, responding to the RFI requirements, and on providing a complete and clear description of the information presented. If a complete response cannot be provided without referencing supporting documentation, you must provide such documentation with the response indicating where the supplemental information can be found.

Errors: Responders or their authorized representative are expected to fully inform DC Water of any errors to the conditions, requirements and specifications found in this RFI after submitting their responses. Failure to do so will be at the vendors own risk. If major changes are necessary, new responses will be secured on the basis of revised lists, drawings, and other documents.

DC Water reserves the right to request verification, validation or clarification of any information contained in any of the responses. This clarification may include checking references and securing other data from outside sources, as well as from the vendor. Slow responses or failure to comply with DC Waters requests may result in the rejection of response.

DC Water reserves the right to reject any response not submitted in conformance with the RFI and any amendment hereto. DC Water will not select any vendor that is not capable, in DC Water's sole judgment, of satisfactorily performing the work required in any subsequent RFP.

USE OF RFI IDEAS. Except as otherwise prohibited by law, and except for information regarding price of a Response that is marked Confidential, DC Water has the right to use any and all ideas presented in response to this RFI, whether amended or not. Selection or rejection of the response does not affect this right.

Protests/Appeals:

Protests directed to the terms, conditions, or form of a proposed procurement action, must be received by the Contracting Officer in writing not later than ten (10) calendar days prior to the date established for opening of responses, except that an initial protest that arises under an amendment to a solicitation may be filed up to four (4) calendar days after the date the amendment was issued but in no case after the time established for opening of responses.

The aggrieved party shall deliver the protest to the DC Water POC identified on the Cover page of this RFI in care of General Manager.

District of Columbia Water and Sewer DC Water

Office of the General Manager

5000 Overlook Ave., SW, Third Floor

Washington, DC 20032

A copy of the protest shall be delivered to the Director, Department of Procurement. It shall be delivered to:

District of Columbia Water and Sewer DC Water

Director of Procurement

5000 Overlook Ave., SW, Room 200

Washington, DC 20032

The Contracting Officer shall issue a decision within thirty (30) calendar days after the protest is filed, subject to any extension approved by the General Manager. The decision of the Contracting Officer shall be final and conclusive. No further administrative remedies will be available to the protester.

Appeal: A protester may appeal a denial of protest by a Contracting Officer to a court of competent jurisdiction.

CERTIFIED LOCAL/SMALL BUSINESS ENTERPRISE PROGRAM

1.General

DCWateriscommittedtotheparticipationandutilizationofcertifiedLBEsandLSBEsinits

contractingandprocurementactivities.PursuanttotheAuthoritysProcurementRegulationsand

BusinessDevelopmentPlan,preferencesshallapplyintheevaluationofbidsandproposalsfrom

localandsmallbusinesseslocatedwithintheDistrictofColumbia,FairfaxCounty,Loudoun

County,MontgomeryCountyandPrinceGeorgesCounty.

Tofacilitateandencouragetheparticipationoflocalandsmallbusinessutilizationand

participation,apreferencewillapplytocompetitivesolicitationsforgoods,services,

constructionandarchitecturalandengineeringservices.Inordertoparticipateinthepreference

program,abusinessenterpriseshallhavecurrentcertificationorregistrationasaLBEorLSBE

byoneofthefollowing:

a)DistrictofColumbiasCBECertificationProgram;

b)MontgomeryCountysMinority,FemaleandDisabledBusinessEnterprisesCertification

Program;

c)PrinceGeorgesCountysLocal,MinorityBusinessEnterpriseRegistrationProgram;

d)VirginiaDepartmentofMinorityBusinessEnterprisesSmall,WomenandMinority

OwnedBusinessProgramasacceptedbyFairfaxCounty;

e)VirginiaDepartmentofMinorityBusinessEnterprisesSmall,WomenandMinority

OwnedBusinessProgramasacceptedbyLoudounCounty;or

f)OthercertificationprogramsrecognizedbytheDistrictofColumbia;FairfaxCounty;

LoudounCounty;MontgomeryCounty;andPrinceGeorgesCountyandmeettheir

Request for Information

Page 5 of 19

respectivecriteriaforLocalandLocalandSmallBusinesses.

Proprietary Property of District of Columbia Water and Sewer Authority

Proprietary Property of District of Columbia Water and Sewer Authority

2.Preferences

TheProgramprovidesfortheutilizationofpreferencepointsinevaluatingproposalsanda

percentagereductioninpriceinevaluatingbidssubmittedbyLBEsandLSBEsorPrime

contractorsutilizingLBEsandorLSBEsassubcontractors.Forevaluationpurposes,the

allowablepreferencesforacompetitivesolicitationareasfollows.

a)Anyprimebidder/proposerthatiscertifiedasaLBEwillreceiveamaximumoffive

percent(5%)reductioninthebidpriceinresponsetoanInvitationforBids(IFB)orthe

additionofamaximumoffive(5)pointsaddedtotheoverallscoreforproposalsin

responsetoaRequestforProposal(RFP).

b)AnyprimebidderthatiscertifiedorregisteredasaLSBEwillreceiveamaximumoften

percent(10%)reductioninthebidpriceor$100,000inresponsetoanInvitationforBids

ortheadditionofamaximumten(10)pointsaddedtotheoverallscoreforproposalsin

responsetoaRequestforProposal(RFP).

Themaximumeligiblepreferencepricereductionforasinglebidisatotaloftenpercent

(10%)or$100,000,whicheverisless.

Themaximumnumberofeligiblepreferencepointsforasingleproposalisanadditional

ten(10)points.

3.PreferencesforSubcontractingwithLBEsandLSBEs

a)Iftheprimebidder/proposerisnotacertifiedLBEorLSBE,preferenceswillbeapplied

tothedollarvaluethatisdesignatedbytheprimecontractorforsubcontractingwithLBE

orLSBEfirms.

b)Iftheprimebidder/proposerisajointventurethatisnotacertifiedLBEorLSBEjoint

venture,preferenceswillbeappliedproportionatelybasedonthetotaldollarvalueofthe

bidorproposalthatisdesignatedforthecertifiedLBEorLSBEparticipationinthejoint

venture.

c)Iftheprimebidder/proposerisacertifiedLBE,preferenceswillalsobeappliedtoLBE

and/orLSBEbasedonthedollarvaluethatisdesignatedbytheprimecontractorfor

subcontractingwithanLBEand/orLSBE.

Thefollowingformulawillbeusedtocalculatethenumberofpreferencepointsor

percentpricereductionthatwillbeusedinevaluatingthebid/proposal:

Proposal

AmountofLBE/LSBEsubcontractdividedbythetotalproposalamounttimesfive(5)

pointsforLBE(ortimesten(10)pointsforLSBE)equalapplicablepreferencepointsor:

LBESubcontractAmount

TotalProposalAmount

X5=Applicablepoints

Bid

AmountofLBE/LSBEsubcontractdividedbythetotalbidamounttimesfivepercent

(5%)forLBE(ortimestenpercent(10%)forLSBE)equalapplicablepricereductionor:

LSBESubcontractAmountX10=Applicable%PriceReduction

TotalBidAmount

d)Anyprimebidder/proposerreceivingthefullmaximumbidpricereductionormaximum

pointadditiontoitsoverallscorewillnotreceiveanyadditionalpricereductionorpoints

forLBEorLSBEparticipationonasubcontractinglevel.

e)WhenajointventureincludesacertifiedLBEorLSBEthatownsandcontrolsatleast

fifty-one(51%)oftheventure,thejointventurewillreceivethepreferencesasifitwere

acertifiedLBEorLSBE.

f)WhenaprimecontractorisacertifiedLBEorLSBE,theprimecontractorshallperform

atleastfifty-onepercent(51%)ofthecontractingeffort,excludingthecostofmaterials,

goodsandsupplies,withitsownorganizationandresources.

4.LBEandLSBEDocumentation

a)Whentheprimecontractorisseekingapreferenceonthebasisofsubcontractingwithan

LBEorLSBE,theprimecontractorshallsubmitthefollowing:

1)AcompletedContractorsIntenttoSubcontractwithCertifiedLocalandLocalSmall

BusinessEnterpriseForm;andaCertifiedLocalandLocalSmallBusinessEnterprise

Form.

2)Assurancethattheprimecontractorwillcooperateinanystudiesorsurveysthatmaybe

requiredbythecontractingofficer,andsubmitperiodicreports,asrequestedbythe

contractingofficer,toallowDCWatertodeterminecompliancebytheprimecontractor

withthesubcontractingplan.

3)AcopyofcurrentLBEorLSBEcertificationorregistrationletter(s)fromoneofthe

following:

a)DistrictofColumbiaDepartmentofSmallandLocalBusinessDevelopment;

b)MontgomeryCountyEconomicDevelopmentAgency;

c)PrinceGeorgesCountyMinorityBusinessDevelopmentDepartment;

d)VirginiaDepartmentofMinorityBusinessEnterprise;or

e)OthercertificationagenciesandprogramsrecognizedbytheDistrictofColumbia

oraDCWateruserjurisdictionandmeetstheDistrictofColumbiasoruser

jurisdictionscriteriaforlocalandlocalandsmallbusinessenterprises.

Bidders/proposersshouldcontacttheapplicableagencydirectlyregardingitscertification

procedures,requirementsand/orcertificationorregistrationstatusasaLBEorLSBE.

4)Anymaterialmisrepresentationonthecertificateformmayresultinterminationofthe

contract,contractorsliabilityforcivilandcriminalactioninaccordancewiththelaw,and

possibledebarment.

TheDCWaterBusinessDevelopmentPlancanbeaccessedon-lineat:

http://www.dcwater.com/business/special_contracts.cfm, or by contacting the DC Water, DepartmentofProcurementat202/787-2704.

Ifawardedthisproject,thePrimeContractorintendstousethefollowingsubcontractor(s):

CompanyName

TypeofWorkToBe

Performed

EstimatedDollar

Amount

Current

Certification

Type(Localor

LocalSmall)

Certification

Number

SolicitationNumber:

ProjectName:

CONTRACTORSINTENTTOSUBCONTRACTWITHCERTIFIEDLOCALandLOCAL

SMALLBUSINESSENTERPRISES

Noncertifiedprimecontractorsmayobtainconsiderationforevaluationofpreferencesfor

subcontractingwithcertifiedlocalorlocalsmallbusinessenterprisesasdescribedin

SECTION 7CertifiedLocal/SmallBusinessEnterpriseProgramforGoodsandServices

Contracts,bycompletingthisformforthequalifyingsubcontractor(s)withtheirresponse.

NameofPrimeBidder/Proposer_______________________________________________________________

CERTIFIEDLOCALandLOCALSMALLBUSINESSENTERPRISEPROGRAM

CERTIFICATIONSTATEMENT

(ToBeFilledOutforEachCertifiedFirmthePrimeContractorisSeekingPreferencePoints)

SolicitationNumber:______________________

ProjectName:______________________________________________________________________

ProjectLocation:_____________________________________________________________________

NameofBiddingPrime:______________________________________________________________

TotalBidPrice: ______________________________________________________________________

NameofCertifiedSubcontractor:________________________________________________________

NameofCertifiedSubcontractor Representative:___________________________________________

Title

ContactTelephone:ContactEmail:______________________________

Address of Certified Subcontractor: ___________________________________________________

Address 1

___________________________________________________

Address 2

___________________________________________________

CityStateZip

AmountofPlannedSubcontract____________________________________________________________

DescriptionofWorktoBePerformed_______________________________________________________

PrimeContractorSignatureDateCertifiedSubcontractorSignatureDate

ATTACHMENT A

ATTACHMENT B

Proprietary Property of District of Columbia Water and Sewer Authority

Business Questions

Matrix

Instructions

InstructionsNote this file contains multiple sheets (tabs). Click the tabs at the bottom of the window for access.Vendor Responses Complete the Business Questions Matrix by placing answer in Response column (C) for each DCW question Vendors are encouraged to elaborate on any question to ensure DC Water has a clear understanding of the firm's willingness and capability Include any digital documents per instructions outlined below and in the RFI documentDetailed InstructionsIf the Respondent wishes to refer to/attach a document to a particular question Respondent shall use this naming convention: Question_#_Respondent (i.e., Question_5_ACME). File name should be noted in column C with any special instructions or comments. Respondent shall return attachments with their response in digital format. All attachments shall be in PDF or MS Office 2010/2013 format.If more than one file is to be attached to a single question Zip the files together and follow the same naming convention for the Zip. Files in the Zip shall be named Question_5_ACME-1, Question_5_ACME-2 and so on.Do not print and return the completed Business Questions Matrix, Respondent shall return a completed Excel spreadsheet with their response as MS Excel file. Respondent is NOT to modify Business Questions Matrix format in any way. Do not add rows or columns, do not change column names, do not add color, do not embed objects, etc. Column C is formatted to "Wrap Text".

Questions

BUSINESS QUESTIONS MATRIXREFQUESTIONRESPONSEBUSINESS QUESTIONSVENDOR RESPONSE1How many years in business does your firm have?2Please provide a representative list of your firm's current customers.3Has your firm been profitable the past three years? Explain.4How many people are employed by your firm?5Does your firm qualify as a LBE (see Section 7 of RFI for details)? If so, please attach your firm's certification.6Does your firm qualify as a LSBE (see Section 7 of RFI for details)? If so, please attach your firm's certification.7If your firm is successful winning business with DC Water will an account manager be assigned to the DC Water account?8Does your firm have a local (within 20 miles of Washington) warehouse(s)?9Does your firm have delivery trucks in the local area?10Please list your firm's locations including headquarters offices? 11Does your firm offer an online ordering portal or "punch-out" catalog that can be customized to DC Water requirements?12Does your firm offer local store pick-up for one-time emergency purchases?13Does your firm offer vendor managed inventory program at DC Water warehouse(s)?14Does your firm offer vendor inventory consignment program? If so explain.15Describe any additional concepts or programs your firm offers that would likely add value to DC Water Materials Management operations. Include diagrams, charts, or other collateral in your response to make your point.16Describe your firm's order cancellation policy and any penalties?17Describe your firm's return policy and any restocking fees?18Does your firm accept net 30 days payment terms?19Does your firm offer volume discount pricing? Explain.20Will your firm offer free daily delivery to DC Water warehouse (i.e., FOB DC Water warehouse)?21Does your firm agree to a negotiated % off MSRP or List discount pricing structure? Please provide details. 22Is your firm willing to pass on manufacturer incentives/promotions to DC Water?23Will your firm agree to include all shipping and transportation cost in its pricing (i.e., free shipping)?24Will your firm agree to random audits of certain company financials to assure DC Water is receiving appropriate pricing?25Will your firm agree to pass-through any manufacturer warranties?

RFIItemList

COMPLIANCE MATRIX

Compliance Matrix and InstructionsSupplier Name:LBE:COMPLIANCE MATRIX*LSBE:PARTS GROUP75%GROUP-1GROUP-2GROUP-3GROUP-4GROUP-5GROUP-6GROUP-7GROUP-8GROUP-9GROUP-10GROUP-11GROUP-12GROUP-13GROUP-14GROUP-15GROUP-16GROUP-17GROUP-18GROUP-19GROUP-20GROUP-21GROUP-22GROUP-23GROUP-24GROUP-25

INSTRUCTIONS1Supplier Name is required in cell B3. Failure to provide supplier name may result in DC Water auto-evaluation tool misreading your response.2If Suplier qualifies as LBE per requirements in Section 7. CERTIFIED LOCAL/SMALL BUSINESS ENTERPRISE PROGRAM of the Main RFI Document, mark an "X" in cell B4.3If Suplier qualifies as LSBE per requirements in Section 7. CERTIFIED LOCAL/SMALL BUSINESS ENTERPRISE PROGRAM of the Main RFI Document, mark an "X" in cell B5.4Go to the PARTS LIST tab for the complete list of parts by group. In the PARTS LIST tab filter column "F" to see the parts (i.e., type of parts) in each Group.5Estimate the percentage of the parts in each Group your company is willing and able to provide.6Mark an "X" in the Compliance Matrix (above) for the parts groups by estimated quantities (percentage) that your company is willing and able to offer DC Water.7Category and subcategory notations in columns G and H in the PARTS LIST tab are for convenience in determining parts and percentages calculations.8Where there is a known manufacturer preference, manufacturer and part number are noted in columns I, J, and K in the PARTS LIST tab. 9Column A of the PARTS LIST tab is a line reference number for ease of use.10Column B of the PARTS LIST tab is the internal DC Water item reference number.11Column C of the PARTS LIST tab is the internal DC Water item description.12Column D of the PARTS LIST tab is the internal DC Water unit of measure.13Column E of the PARTS LIST tab is the estimated internal annual forecast.14Name and zip completed Compliance Matrix (your response) per the instructions in Section 5. GENERAL RESPONSE INSTRUCTIONS, TERMS AND CONDITIONS of the Main RFI Document.

EXAMPLES1) If your company is willing and able to provide 50% of the items in GROUP-1 and 70% of the items in GROUP-4 your response would look like EXAMPLE 1:2) If your company is willing and able to provide 40% of Group-1, 75% of GROUP-3, 100% of, GROUP-4, 90% of GROUP-7, AND 20% of GROUP-12 your response would look like EXAMPLE 2:EXAMPLE 1EXAMPLE 2COMPLIANCE MATRIX*COMPLIANCE MATRIX*PARTS GROUP75%PARTS GROUP75%GROUP-1XGROUP-1XGROUP-2GROUP-2GROUP-3GROUP-3XGROUP-4XGROUP-4XGROUP-5GROUP-5GROUP-6GROUP-6GROUP-7GROUP-7XGROUP-8GROUP-8GROUP-9GROUP-9GROUP-10GROUP-10GROUP-11GROUP-11GROUP-12GROUP-12XGROUP-13GROUP-13GROUP-14GROUP-14GROUP-15GROUP-15GROUP-16GROUP-16GROUP-17GROUP-17GROUP-18GROUP-18GROUP-19GROUP-19GROUP-20GROUP-20GROUP-21GROUP-21GROUP-22GROUP-22GROUP-23GROUP-23GROUP-24GROUP-24*Percentages are approximations (i.e., your best estimate), but be prepared to defend your matrix selections.GROUP-25GROUP-25DO NOT change the format of this page in any way. DO NOT add columns or rows. DO NOT embed objects.

PARTS LISTREFDCWITEMITEM-DESCRIPTIONUOMFORECASTGROUPCATEGORYSUBCATEGORYMFRMANUFACTURER NAMEPART NUMBERSORT16349PIERS,CONCRETE,15" X 12"EACH397GROUP-1CONSTRUCTIONCONCRETE124413RING, MANHOLE, CONCRETE, 4" X 30" X 37-1/2" O.D.EACH220GROUP-1CONSTRUCTIONCONCRETE1310371RING,MANHOLE,CONCRETE 6" X 30" X 37-1/2/" O.D.EACH371GROUP-1CONSTRUCTIONCONCRETE141918RING,MANHOLE,CONCRETE, 8" X 30" X 37-1/2" O.D.EACH20GROUP-1CONSTRUCTIONCONCRETE1513056SLAB,CONCRETE PRECAST, 4'X4' : FOR CROSS CONNECTION 6EACH78GROUP-1CONSTRUCTIONCONCRETER026RETRO8415/24-G-91623256TOP, Catch Basin, 8", concreteEACH25GROUP-1CONSTRUCTIONCONCRETE8" DC CB1718852FAN, CENTRIFUGAL: OF-1E THRU 4EEACH8GROUP-1CONSTRUCTIONEQUIPMENT1828630FAN, DC axial flow, brushless, 92 mm x 92 mm x 25 mm, 24 VDC, 0.168 amp, 3200 rpm, 51 cfmEACH4GROUP-1CONSTRUCTIONEQUIPMENTE9225H24B1928160FAN, for GE MCC, 4-7/8" x 4-7/8", GE Evolution E9000, Bucket model E23791, E33752, Type AF3VTEACH1GROUP-1CONSTRUCTIONEQUIPMENTGE 273A7844CWP111026266FAN, PF2000 BEIGE FILTER FAN 115, PF2000, 115VOLTEACH1GROUP-1CONSTRUCTIONEQUIPMENTH064HAMMOND POWER SOLUTIONSPF200011116447FLIGHT, ? TYPE, 3 X 8 X 8' - 11" LG, FIBERGLASS REINFORCED PLASTICS (FRP), 10H, DUAL PURPOSEEACH10GROUP-1CONSTRUCTIONEQUIPMENTP032POLYCHEM SYSTEMS641-1353811213104FLIGHT, 10 HOLE, 3' X 8' X 18", ? MATERIAL, FOR SEDIMENTATION BASIN/FLOATATION THICKNER/SLUDGE COLLECTOR (NCS-720-S)EACH32GROUP-1CONSTRUCTIONEQUIPMENTP032POLYCHEM SYSTEMS641-2133311313090FLIGHT: FOR WEST SEDIMENTATION BASINEACH32GROUP-1CONSTRUCTIONEQUIPMENTP032POLYCHEM SYSTEMS641-2131711410704FLIGHT:3" X 8" X 231",DIAMOND POLY,FLOATATION THICKENEREACH156GROUP-1CONSTRUCTIONEQUIPMENTS034SIEMENS WTR TECH (US FILTER/ENVIREXW2T339020111521836LIGHT, Emergency, 120/277, 2 fixtureEACH9GROUP-1CONSTRUCTIONEQUIPMENTE038EMERGI-LITE12KSC50-2-IG11625986GLAND, Pusher; for CSFP pumpsEACH1GROUP-1CONSTRUCTIONEQUIPMENTM074MOYNO30211722550RING, GLANDEACH1GROUP-1CONSTRUCTIONEQUIPMENTF047FYBROC01720B001111822552WASHER, GLAND, ? NOMINAL SZ, 303 SSEACH1GROUP-1CONSTRUCTIONEQUIPMENTF047FYBROC70001B01A11917830PAVING BREAKER,MPB-90AEACH28GROUP-1CONSTRUCTIONPAVING12032996RISER, Work Platform, 5'9" Lg. 19" Wide, Telescoping Tube Steel, for THP Cake bin conveyor repairsEACH1GROUP-1CONSTRUCTIONSCAFFOLDING8004T11121SCAFFOLDINGSCAFFOLDING RENTALDAY1GROUP-1CONSTRUCTIONSCAFFOLDING12229658TOOL, Three-Person Scaffolding Stage, 28" x 12 ft., 750 lb. capacity, weight = 71 lbsEACH1GROUP-1CONSTRUCTIONSCAFFOLDING3AZW512329657TOOL, Three-Person Scaffolding Stage, 28" x 16 ft., 750 lb. capacity, weight = 103 lbsEACH1GROUP-1CONSTRUCTIONSCAFFOLDING3AZW612422524ISOLATOR, DC input signal conditioner, RWWP 7E and 8EEACH4GROUP-2CONSTRUCTIONSIGNAGEE078EurothermQ406-A00222533086SIGN, ARROW SHIFT LEFT, 48x48,EACH4GROUP-2CONSTRUCTIONSIGNAGEM144MUTCDW1-4L22633084SIGN, END ROAD WORK, 36x18, TrEACH6GROUP-2CONSTRUCTIONSIGNAGEM144MUTCDG20-222733085SIGN, FLAGGER SYMBOL, 48x48, TEACH6GROUP-2CONSTRUCTIONSIGNAGEM144MUTCDW20-7A22833083SIGN, KEEP LEFT, 24x30, TraffiEACH1GROUP-2CONSTRUCTIONSIGNAGEM144MUTCDR4-8A22930445SIGN, PADDLE STOP/SLOW, 82 INCH POLES, HI INTENSITYEACH4GROUP-2CONSTRUCTIONSIGNAGE1465523022457SIGN, SIDEWALK CLOSED USE OTHER SIDE, STREETEACH10GROUP-2CONSTRUCTIONSIGNAGESM 200023119406SIGN: ROAD CLOSED AHEAD,48"X48",ROLL UPEACH22GROUP-2CONSTRUCTIONSIGNAGE23219415SIGN:MERGA LEFT,48"X48" ROLL UPEACH22GROUP-2CONSTRUCTIONSIGNAGE23319416SIGN:MERGA RIGHT,48"X48", ROLL UPEACH22GROUP-2CONSTRUCTIONSIGNAGE23415869SIGN:STOP/SLOW PADDLE,24",ALUMINUM COMPOSITE,TRAFFIC,(DIAMOND GRADE REFLECTIVE)EACH6GROUP-2CONSTRUCTIONSIGNAGE23515872SIGN:TRAFFIC, ROAD CLOSED,48"X48",BLACK LETTERS ON ORANGE,ALUMINUM COMPOSITE,SW2032D (DIAMOND GRADE REFLECTIVE)EACH25GROUP-2CONSTRUCTIONSIGNAGE23615890STAND SIGN,X-550 INTERSTATE SERIES,GALVANIZED STEELEACH5GROUP-2CONSTRUCTIONSIGNAGE23728482STAND, CONSTRUCTION SIGNS, HIGH-LEVEL, DOUBLE SPRING, BREAKAWAY BASE, USED FOR TRAFFIC CONTROL SAFETYEACH100GROUP-2CONSTRUCTIONSIGNAGEA133ACCUFORM SIGNSFRC76323828483STAND, CONSTRUCTION SIGNS, LOW-LEVEL, TILT ADJUST, SINGLE SPRING, GALVANIZED STEEL FRAME, USED FOR TRAFFIC CONTROL SAFETYEACH40GROUP-2CONSTRUCTIONSIGNAGEA133ACCUFORM SIGNSFRC7862393267320 AMP 3 WAY SWITCHEACH10GROUP-3ELECTRICALELECTRICALC149COOPER INDUSTRIES (EATON)CS320B3403267420 AMP MOMENTARY CONTACT TOGGLE SWITCH SPDTEACH2GROUP-3ELECTRICALELECTRICALH036HUBBELLHBL15571341ECHOMAX XPS-10 TRANSDUCER7ML1115-OFA30EACH2GROUP-3ELECTRICALELECTRICAL342ECHOMAX XPS-10 TRANSDUCER7ML1115-OKA30EACH2GROUP-3ELECTRICALELECTRICAL34319483ACTUATOR GEAR BOX PTA 50EACH4GROUP-3ELECTRICALELECTRICAL34432948ACTUATOR,ELECTRIC, 3/60/460, SG-SRI-6C, 3EACH1GROUP-3ELECTRICALELECTRICALL023LIMITORQUE (FLOWSERVE)MXa-10/MOD/AD-NB-SS-4A-AX-TA34528356ADAPTER, GEARBOX ADAPTER, TUBE LENGTH 2", 3 MICRON, 3/4" NPT, DRAIN 1"EACH28GROUP-3ELECTRICALELECTRICALD075DES-CASEGAB102H8234633198AMPLIFIER, isolating switchingEACH2GROUP-3ELECTRICALELECTRICAL34722822ANODE, ELECTRIC, 22MM, 10/100EACH1GROUP-3ELECTRICALELECTRICALL044LOCHINVAR198093-00034822831ANODE, NPT, 16" LONG 0.840" DIAMETER, 3/4"EACH1GROUP-3ELECTRICALELECTRICAL34922832ANODE, NPT, 33" LONG 0.840" DIAMETER, 3/4"EACH1GROUP-3ELECTRICALELECTRICAL35033208ARRESTER, Regolator mounted, 1EACH10GROUP-3ELECTRICALELECTRICAL35123526ASSEMBLY, BATTERY FUSE ASSEMBLY, COMBUSTIBLE GAS ANALYZEREACH1GROUP-3ELECTRICALELECTRICALE0753435225025ASSEMBLY, POWER CABLE, SUBMERSIBLE SEWAGE PUMPEACH1GROUP-3ELECTRICALELECTRICALK052KSB INC18082938-16M35323531ASSEMBLY, POWER SUPPLY, COMBUSTIBLE GAS ANALYZEREACH1GROUP-3ELECTRICALELECTRICALC148CROWNCON DETECTION INSTRUMENTSS01174635423623ASSEMBLY, POWER, CENTRIFUGAL ROOF EXHAUST FANEACH2GROUP-3ELECTRICALELECTRICALL032LOREN COOK COMPANY70958335526473ASSEMBLY, WIREWAY, 4" X 4" GRAY, PANDUIT G4X4LG6EACH1GROUP-3ELECTRICALELECTRICALP066PANDUITG4X4LG635620950BALLAST, 2-TUBE, 120/277V, T-8EACH186GROUP-3ELECTRICALELECTRICAL232-120/27735725710BALLAST, BALLAST HPS CORE & COIL CWA BALLAST KIT HPS CORE & COIL BALLAST, 250W, S50 LAMP, S0250-11C-211-DKEACH44GROUP-3ELECTRICALELECTRICALP027PHILLIPS LIGHTING1FYD935832974BALLAST, CFL, 120/277 volts, 1 or 2 lamps, CFTR42W/GX24Q lamp, 42 watts, Security/Visitor Center, 50/60 HzEACH6GROUP-3ELECTRICALELECTRICALP027PHILLIPS LIGHTINGIFC2S42M2LDK35925627BALLAST, CORE AND BALLAST KIT (71A5790 CORE AND COIL), 120/208/240/277/480 VOLTS, 250W, 1 LAMP, M58, METAL HALIDE, 60 HzEACH24GROUP-3ELECTRICALELECTRICALA024ADVANCE BALLAST71A5770-001D36025638BALLAST, CORE AND BALLAST KIT, 100W, 1 LAMP, S54 LAMP, S0100-71C-512-DK, 60 HzEACH24GROUP-3ELECTRICALELECTRICAL1093-910144-35036125634BALLAST, CORE AND BALLAST KIT, HP SODIUM 1015CU3101A, 120/208/240/277/480 VOLTS, 400W, 1 LAMP, S51 LAMP, S400ML5AC4M-500K, PRE-WIRED WITH CAPACITOR. INCLUDES BRACKETS AND HARDWARE, 60 HzEACH24GROUP-3ELECTRICALELECTRICALS400ML5AC4M-500K36225637BALLAST, CORE AND BALLAST KIT, HP SODIUM 1016CU3202A, 120/208/240/277 VOLTS, HX-HPF, 100W, 1 LAMP, S54 LAMP, S100MLTLC3M-500K, PRE-WIRED WITH CAPACITOR. INCLUDES BRACKETS AND HARDWARE, 60 HzEACH24GROUP-3ELECTRICALELECTRICALS100MLTLC3M-500K36325642BALLAST, CORE AND BALLAST KIT, HP SODIUM 1234CU5201A, 120/208/240/277/480 VOLTS, 1000W, 1 LAMP, S52 LAMP, S1000ML5AC5M-500K, PRE-WIRED WITH CAPACITOR. INCLUDES BRACKETS AND HARDWARE, 60 HzEACH24GROUP-3ELECTRICALELECTRICALS1000ML5AC5M-500K36425632BALLAST, CORE AND BALLAST KIT, HP SODIUM, 480 VOLTS, 400W, 1 LAMP, S51, 60 HzEACH24GROUP-3ELECTRICALELECTRICALA024ADVANCE BALLAST71A8443-001D36525635BALLAST, CORE AND BALLAST KIT, METAL HALIDE, 1000W, 1 LAMP, M47, M1000-81C-213-CK, MULTI-TAP V, 60 HzEACH48GROUP-3ELECTRICALELECTRICAL1093-910321-37236625636BALLAST, CORE AND BALLAST KIT, METAL HALIDE, 120/208/240/277/480 VOLTS, 1000W, 1 LAMP, M47, FEATURES 71A6552-A CORE AND COIL, 60 HzEACH24GROUP-3ELECTRICALELECTRICALA024ADVANCE BALLAST71A6552-00136725630BALLAST, CORE AND BALLAST KIT, METAL HALIDE, 120/208/240/277/480 VOLTS, 400W, 1 LAMP, M59, 60 HzEACH70GROUP-3ELECTRICALELECTRICAL1FYG336825639BALLAST, CORE AND BALLAST KIT, METAL HALIDE, 250W, 1 LAMP, M58 LAMP, S0250-11C-211-CK, 60 HzEACH48GROUP-3ELECTRICALELECTRICAL1091-9100-30036925633BALLAST, CORE AND BALLAST KIT, METAL HALIDE, 480 VOLTS, 250W, 1 LAMP, M58, M0250-11C-211-CK, 60 HzEACH52GROUP-3ELECTRICALELECTRICALH079HOWARD INDUSTRIESM-250-5T-CWA-K-25037025641BALLAST, CORE AND BALLAST KIT, METAL HALIDE, HX-HPF, 120/277 VOLTS, 50W, 1 LAMP, S68, FEATURES 71A6552-A CORE AND COIL, 60 HzEACH24GROUP-3ELECTRICALELECTRICAL6V62737132698BALLAST, ELECTRONIC BALLAST, 120/277 VOLTEACH6GROUP-3ELECTRICALELECTRICALA024ADVANCE BALLASTICF-2S42-M2-LD-K37232943BALLAST, electronic compact fluorescent, 120/277 VAC, 25 to 56 watts, one or two lamps (see attached cut sheet), Multi-exit lead configutation with 2" studs on centerEACH3GROUP-3ELECTRICALELECTRICALU014UNIVERSAL LIGHTING TECHNOLOGYC2642UNVMES37322414BALLAST, Flourescent, 120/277 volt, 4 lamps, F32/T8, 4-TUBEEACH30GROUP-3ELECTRICALELECTRICALU014UNIVERSAL LIGHTING TECHNOLOGY4 tube F32/T8 120/27737432864BALLAST, fluorescent battery backup, 120/277 VAC, 3.3 watts at 120V, 3.2 watts @ 277 V, one or two 2'-4' T8-T12, one 6'-8' T8-T12, damp/wet location, 60 HzEACH10GROUP-3ELECTRICALELECTRICALL028LITHONIAPS1400DW37532944BALLAST, fluorescent battery pack, NiCad, 120/277 VAC, 2.5 watts, one-lamp emergency operation, T8, T12, U-lamp or tube, twin-tube CFL, T9, (see attached cut sheet), quick connectEACH3GROUP-3ELECTRICALELECTRICALL028LITHONIAPSQ500QD37633030BALLAST, fluorescent, dimmableEACH10GROUP-3ELECTRICALELECTRICALA024ADVANCE BALLASTREZ3S32SC37727326BALLAST, fluorescent, dimmable, 277 volts, 0.38/0.32 amp, 32/25 watts, 3 lamps, F32/T8, U-tube lamps in Central Control RoomEACH5GROUP-3ELECTRICALELECTRICALA024ADVANCE BALLASTVEZ-3S3237820175BALLAST, HIGH PRESSURE SODIUM, 120/208/240/277, 1, HPS, 150 watt, MAGNETIC, HID LIGHTINGEACH26GROUP-3ELECTRICALELECTRICALS096SYLVANIA461354733537927095BALLAST, HIGH PRESSURE SODIUM, 480V, 250W, 1 LAMP, S50, 60HzEACH59GROUP-3ELECTRICALELECTRICAL1091-910113-30138025628BALLAST, HP SODIUM, 120/208/240/277 VOLT, 150W, 1 LAMP, S-55 HP LAMP, GE150MLTLC3D-5, PRE-WIRED WITH CAPACITOR AND IGNITOR. INCLUDES BRACKETS AND HARDWAREEACH72GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRIC8709438128287BALLAST, HPS IGNITOR, HPS IGNITOREACH23GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRICGELTG 35-216702R2238231516BALLAST, Metal Halide Ballast, 120/208/240/277/480 V, 2.6/1.5/1.4/1.1/0.7A, 290 W; 60 HZ;, 1, Metal Halide, 250W, 60hZEACH12GROUP-3ELECTRICALELECTRICALP027PHILLIPS LIGHTING71A5750-001D 250 250W MH 5 - Tap38331928BALLAST, metal halide core and coil, 5-Tap ballast (120, 208, 240, 277,480), 175 watts, GEM175ML5AA3-5EACH6GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRIC6307838423816BALLAST, METAL HALIDE LAMP, M58, CW AUTOTRANSFORMER, 277/240/208/120 VOLTS, 250W, FEATURES 71A5791 CORE AND COIL, 60 HzEACH12GROUP-3ELECTRICALELECTRICALA024ADVANCE BALLASTADV71A5750001D 250W MH 5-TAP38522356BALLAST, metal halide, 120/208/240/277/480 volt multi-tap, M400/U, B37 lamp, E39 mogul base, 400 watt lampEACH40GROUP-3ELECTRICALELECTRICALA024ADVANCE BALLAST71A6051001D38625629BALLAST, METAL HALIDE, 120/208/240/277/480 VOLT, 175W, 1 LAMP, M-57, GEM175ML5AC3-5, PRE-WIRED WITH CAPACITOR AND IGNITOR. INCLUDES BRACKETS AND HARDWAREEACH18GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRIC8721038727962BALLAST, metal halide, multi-tap, 120/208/240/277 volt, 0.70 amps @ 277 volts operating /0.45 amps starting @ start, 60 HZKIT51GROUP-3ELECTRICALELECTRICALU011UNIVERSAL ELECTRICMH150 multi-tap38820228BALLAST, T-8, 120 V, 2, ELECTRIC FLORESCENTEACH200GROUP-3ELECTRICALELECTRICAL38924307BALLAST, TYPE B1 LIGHTING FIXTURE, ?VOLTAGEEACH10GROUP-3ELECTRICALELECTRICALH001H. E. WILLIAMS, INCEB2/239024321BALLAST, TYPE C LIGHTING FIXTURE, ?VOLTAGEEACH20GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRIC35-962190-239110922BALLAST:FLUORESCENT,2 LAMP,T-8 LAMP,32W LAMPEACH30GROUP-3ELECTRICALELECTRICALP027PHILLIPS LIGHTING29NT9739222747BASE, GFI CIRCIUT BREAKER DIN RAIL MOUNTINGEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DQOMB239330187BASE, sub, selector switch, and legend plate, for use with TC-1101 thermostat, Primary head house EUH-1EACH1GROUP-3ELECTRICALELECTRICALB011BARBER COLMAN COAT-60239419806BATTERY PACK: 18V TWIN HD XRPEACH6GROUP-3ELECTRICALELECTRICAL6VEE339524827BATTERY, 1756-BA1 AB CONTROLLOGIX BATTERYEACH9GROUP-3ELECTRICALELECTRICALA042ALLEN BRADLEY CO (ROCKWELL AUTOMTN)1756-BA139621333BATTERY, AA, ALKALINE, PK 24EACH27GROUP-3ELECTRICALELECTRICALD054DURACELL5LE2339721335BATTERY, AAA, ALKALINE, PK 24EACH7GROUP-3ELECTRICALELECTRICALD054DURACELL5LE2539823525BATTERY, BACK UP POWER, 12V, COMBUSTIBLE GAS ANALYZER, 1.2AH, E01875EACH1GROUP-3ELECTRICALELECTRICALE0187539929399BATTERY, charger, 18 volt, use with Milwaukee M18 lithium-ion batteries, 2792-20, 120 volt AC wall outlet connectionEACH1GROUP-3ELECTRICALELECTRICAL42160499310028952BATTERY, CHARGER, dual port, 120 volt/18 volt, Lithium-Ion, Ni-Cad, NiMH batteries, 7.2 amps, 1 hour chargeEACH2GROUP-3ELECTRICALELECTRICAL40114977310120822BATTERY, CORDLESS - XRP SERIES, 18 VEACH8GROUP-3ELECTRICALELECTRICALD024DEWALTDC9096310222026BATTERY, Lead calcium, 6 volt, Emergency Lighting rechargeable, 4 amp hrs, Portalac PE6v4.5, 4 1/8"h x 2 3/4" w x 1 7/8"dEACH32GROUP-3ELECTRICALELECTRICALL028LITHONIA1127310322287BATTERY, Lead-Acid sealed enclosure, rechargeable, 6 volt, emergency Lighting, 10 amp hrsEACH18GROUP-3ELECTRICALELECTRICALNP10-6310421351BATTERY, LITHIUM, 9VEACH24GROUP-3ELECTRICALELECTRICALLA522310527462BATTERY, pack, Lithium-Ion, 20 VDC, 4 amp-hoursEACH10GROUP-3ELECTRICALELECTRICALD024DEWALTDCB204310627767BATTERY, RBC48 BTI UPS REPLACEMENT, 750VA, CARTRIDGE LEAD ACIDEACH20GROUP-3ELECTRICALELECTRICALSLA48-BTI310727766BATTERY, RBC7 BTI UPS REPLACEMENT, 1500VA, CARTRIDGE LEAD ACIDEACH6GROUP-3ELECTRICALELECTRICALSLA7-BTI310828108BATTERY, ROTORK ACTUATOR, WIQ81222EACH25GROUP-3ELECTRICALELECTRICALR056ROTORK CONTROLSWIQ8122310927823BATTERY, solar voltaic, 12 volt, Primary G-house pole lamp, deep cycle, 6-1/2" x 12" x 8" heightEACH3GROUP-3ELECTRICALELECTRICALDC27311032892BATTERY,DRY CELL, button cell, silver oxide, 357, 1.55 voltEACH4GROUP-3ELECTRICALELECTRICALD054DURACELL41333661285311115655BATTERY:6VDC,POWER SONIC,12.0 AMPEACH4GROUP-3ELECTRICALELECTRICAL81334001018311226429BLOCK, FUSEBLOCK, PULL CLASS CC 3P, 30A, 600VEACH2GROUP-3ELECTRICALELECTRICALF014FERRAZ-SHAWMUT (FRMRLY GOULD SHAWMUUSM31311326428BLOCK, FUSEBLOCK, PULL, FNQ, 1 P, 30A WITH BLOWNFUSEEACH2GROUP-3ELECTRICALELECTRICALF014FERRAZ-SHAWMUT (FRMRLY GOULD SHAWMUUSM1I311426427BLOCK, FUSEBLOCK, PULL, FNQ, 3P, 30A WITH BLOWNFUSEEACH2GROUP-3ELECTRICALELECTRICAL311526264BLOCK, SHORTING TERMINAL BLOCK, KUSC4EACH1GROUP-3ELECTRICALELECTRICALKUSC4311626265BLOCK, SHORTING TERMINAL BLOCK, KUSC6EACH1GROUP-3ELECTRICALELECTRICALKUSC6311726268BLOCK, STEM, 2-1/2" OD X 6" LENGHT, UPPER ANACOSTIAEACH2GROUP-3ELECTRICALELECTRICALN036NORTHCOAST VALVE AND GATE INCNUT2-1/2"ODX6"LENGHT311826267BLOCK, TERMINAIL, 3 CIRCUIT FRONT MOUNTED NON PULL APARTEACH1GROUP-3ELECTRICALELECTRICALNSS3-WH311926472BLOCK, TERMINAL BLOCKS, 12 POINT, DISTRIBUTION CONTROL PANELEACH1GROUP-3ELECTRICALELECTRICALM017MARATHON1512STD312025881BLOCK,TERMINALEACH68GROUP-3ELECTRICALELECTRICALA042ALLEN BRADLEY CO (ROCKWELL AUTOMTN)1797-TB3312132885BLOCK,TERMINAL, 600 V, 90 A, 3-terminal, dead front, 2.31" wide, #4 - #14 CU, SP-A18A and BEACH10GROUP-3ELECTRICALELECTRICALC130COOPER BUSSMANN14004-3312231563BLOCK,TERMINAL, 600 VAC/DC, 25 amp, panel mount, 20-12 AWG wire, pull apart (2 piece), Primary grit chamber pumps, GT-1A to 15BEACH4GROUP-3ELECTRICALELECTRICALA042ALLEN BRADLEY CO (ROCKWELL AUTOMTN)1492-EC85312328933BLOCK,TERMINAL, 600 VAC/DC, 60 amp, panel mount, 4-14 AWG wire, pull apart (2 piece), Secondary collector MCCEACH4GROUP-3ELECTRICALELECTRICALA042ALLEN BRADLEY CO (ROCKWELL AUTOMTN)1492-ED103312427042BLOCK,TERMINAL, 600 VOLTS, 145 AMPS, 2 SCREW CLAMPS & 1 TAPPED HOLE FOR CROSS CONNECTION, 58 X52.5, 8-2 AWG, POLYAMIDE 6.6EACH19GROUP-3ELECTRICALELECTRICALCTS35U312531168BOARD,PRINTED CIRCUIT, Gardner-Denver air compressor, dechlorination buildingEACH1GROUP-3ELECTRICALELECTRICALG005GARDNER DENVER201ASL1173312632643BOARD,PRINTED CIRCUIT, Hi-Power control, Spent Washwater Pump eddy current controlEACH1GROUP-3ELECTRICALELECTRICALD058DYNAMATIC015-001201-0012312732644BOARD,PRINTED CIRCUIT, Power assembly, EC digital logic, Spent Washwater Pump eddy current controlEACH1GROUP-3ELECTRICALELECTRICALD058DYNAMATIC015-001200-0001312829786BODY, CONDUIT OUTLET, 1" TYPE-T ; FORM 7, DARK GRAY PVC COATEDEACH5GROUP-3ELECTRICALELECTRICALOCLT37-G312929616BODY, CONDUIT OUTLET, 1" TYPE-LB; FORM 7, DARK GRAY PVC COATEDEACH10GROUP-3ELECTRICALELECTRICALOCLLB37-G313029482BODY, CONDUIT OUTLET, 1/2" TYPE-C; FORM 7, DARK GRAY PVC COATED, with coverEACH5GROUP-3ELECTRICALELECTRICALT026THOMAS & BETTSC17-G313127037BODY, CONDUIT OUTLET, 3/4" TYPE-LB; FORM 7, DARK GRAY PVC COATEDEACH13GROUP-3ELECTRICALELECTRICALT026THOMAS & BETTSLB27-G313228473BODY, CONDUIT OUTLET, 3/4" TYPE-LL; FORM 7, DARK GRAY PVC COATEDEACH5GROUP-3ELECTRICALELECTRICALOCLLL27-G313328479BODY, CONDUIT OUTLET, 3/4" TYPE-LR; FORM 7, DARK GRAY PVC COATEDEACH5GROUP-3ELECTRICALELECTRICALOCLLR27-G313426045BODY, CONDUIT OUTLET, 3/4" TYPE-T ; FORM 7, DARK GRAY PVC COATEDEACH4GROUP-3ELECTRICALELECTRICALOCLT27-G313527076BODY, CONDUIT OUTLET, 3/4" TYPE-T; FORM 8, DARK GRAY PVC COATED, includes cover and screwsEACH14GROUP-3ELECTRICALELECTRICALT28-4X-G313626044BODY, CONDUIT OUTLET, 3/4" TYPE-TB; FORM 7, DARK GRAY PVC COATEDEACH4GROUP-3ELECTRICALELECTRICALOCLTB27-G313732608BOOK, reference, NFPA 70E, handbook, 2015 editiion, 368 pagesEACH3GROUP-3ELECTRICALELECTRICAL46UA84313832646BOOK, reference, two book set, 2015 edition, NFPA 70E standard and NFPA 70E handbookEACH5GROUP-3ELECTRICALELECTRICALNFP-70ESET15313932778BOX, 30 Key BoxEACH1GROUP-3ELECTRICALELECTRICALM082MASTER LOCK7122D314024512BOX, ATTACHED LID CONTAINER, OUTSIDE LG 21-1/2", OUTSIDE WD 15", OUTSIDE HT 12-1/2", INSIDE LG 18-7/16", INSIDE WD 13-1/4"EACH10GROUP-3ELECTRICALELECTRICAL5LA33314131562BOX, BIN Storage, 11" Wide x 23-7/8" Deep x 7" High, Polypropylene, Bin storage for Maintenance shopEACH102GROUP-3ELECTRICALELECTRICAL42185T91314230574BOX, bin, storage, yellow, 4-1/8" x 11-5/8" x 4", 50 lb. capacity, Polypropylene/Polyethylene, Order Qty of 1 = (1) 36 PackEACH2GROUP-3ELECTRICALELECTRICAL73087306314328462BOX, storage for small parts, organizer, 18-1/2" x 13" x 3" deep, 8 to 32 compartments, copolymer material, greyEACH6GROUP-3ELECTRICALELECTRICAL00292995314430054BOX, storage, truck, saddle, fits mini-long and short bed, 48-3/4" wide x 5-7/8" high x 19-7/8" deep, 6.4 cubic feet, diamond tread aluminumEACH1GROUP-3ELECTRICALELECTRICAL65365272314531539BOX, Tier17 PG style Quazite box, 11"x18", ANSI/SCTE 77., 22,500 lbsEACH1GROUP-3ELECTRICALELECTRICALH078HUBBELL POWER SYSTEMSPG1118BA18314631332BOX,CONDUIT OUTLET, C-through, rectangle, 2 mounting holes, FD (deep), rigid & IMC, single gang, 3/4", one hub top, one hub bottom, w/o cover, cast iron, zinc platedEACH2GROUP-3ELECTRICALELECTRICALT026THOMAS & BETTSFDC2-TB314731333BOX,CONDUIT OUTLET, C-through, rectangle, 2 mounting holes, FD (deep), rigid & IMC, single gang, 3/4", one hub top, one hub bottom, w/o cover, malleable ironEACH2GROUP-3ELECTRICALELECTRICALK020KILLARKFDC-2M314828994BOX,CONDUIT OUTLET, ROUND, SXPLOSION PROOF, 3/4", 1, COUPLING, ROUND, PVCEACH4GROUP-3ELECTRICALELECTRICALL049LIGHTALARMS (THOMAS&BETTS)GUAL24314927131BOX,CONDUIT-CAST DEVICE, 3/4", dead end, deep, iron, two hub bottom, dark gray, PVC coatedEACH6GROUP-3ELECTRICALELECTRICALT026THOMAS & BETTSFDD2-G315026739BOX,CONDUIT-CAST DEVICE, 3/4", one hub top, two hub bottom, dark grayEACH2GROUP-3ELECTRICALELECTRICALT026THOMAS & BETTSFDCC2-G315128057BOX,CONDUIT-CAST DEVICE, FS, 3/4" hub, 1 gang, cast aluminum, hub at bottomEACH16GROUP-3ELECTRICALELECTRICALC114CROUSE HINDSFS2-SA315226805BOX,CONDUIT-CAST DEVICE, FS, 3/4" hub, 1-gang, malleable iron, one connectionEACH2GROUP-3ELECTRICALELECTRICALA073APPLETONFS-1D-75315326738BOX,CONDUIT-CAST DEVICE, FS/FD, deep, feed through, 3/4", 1-gang, PVC coated gray iron, one hub top, one hub bottom, dark grayEACH2GROUP-3ELECTRICALELECTRICALT026THOMAS & BETTSFDC2-G315431197BOX,CONDUIT-CAST DEVICE, single gang, with mounting lugs, 3/4" hubs (3), one on each end, one on bottom, for threaded rigid conduit, PVC coated cast ironEACH10GROUP-3ELECTRICALELECTRICALT026THOMAS & BETTSFDCT2-G315525849BOX,ELECTRICAL, "gem", for MC/Armored cable, 3 x 2 x 2.5, One 1/2" KO back, single gang, galvanized zincEACH49GROUP-3ELECTRICALELECTRICALR003RACO518315625342BOX,ELECTRICAL, 1900 Box, Corner Edges, 4" square, 1-1/2" deep, 1/2" and 3/4" K/Os, welded corners, galvanized zincEACH10GROUP-3ELECTRICALELECTRICALR003RACO189315725091BOX,ELECTRICAL, 1900 Box, Corner Edges, 4" square, 2-1/8" deep, 1/2" and 3/4" K/Os, welded corners, galvanized zincEACH10GROUP-3ELECTRICALELECTRICALR003RACO232315828389BOX,ELECTRICAL, 1900, square with welded corner edges, 4" x 4" ' 2-1/8" deep, 3/4" KOs, steel, 30.3 cubic-inch volumeEACH24GROUP-3ELECTRICALELECTRICALR003RACO231315928961BOX,ELECTRICAL, aWEATHERPROOF, 12"X12"X8", lUMINIUM COATED WITH PVCEACH2GROUP-3ELECTRICALELECTRICAL57516H03316032962BOX,ELECTRICAL, Explosion Proof Enclosure, 08x08x06, Copper-Free Aluminum, To terminate electrical connectionsEACH6GROUP-3ELECTRICALELECTRICALC114CROUSE HINDSECP080806316132986BOX,ELECTRICAL, FD Type, Cast Box, 1/2" to 1", 1, Feraloy iron alloy or copper-free aluminum, RectagleEACH8GROUP-3ELECTRICALELECTRICALA073APPLETONFD-1-75316227439BOX,ELECTRICAL, Hinged, wall mount enclosure, 12" x 12" x 6", 14 gauge steel, NEMA 1EACH3GROUP-3ELECTRICALELECTRICALH036HUBBELLN1C121206316326006BOX,ELECTRICAL, junction, surface mount, 9" x 9" x 4.2" deep, PVCEACH26GROUP-3ELECTRICALELECTRICAL4FYU7316432874BOX,ELECTRICAL, Rigid Non-Metallic Conduit Junction Boxes, 6"x6"x6", 1, Non-Metallic, Carlon junction box offers all the corrosion resistance and physical properties needed for direct burial applicationsEACH4GROUP-3ELECTRICALELECTRICALC016CARLONE989RRR-UPC316527955BOX,ELECTRICAL, switch, 2.625" x 4.219" x 2.5" deep, (2) 1/2" end KOs, (2) 1/2" bottom KOs, gangable, 2 or more devices, steel, plaster ears (old work clips)EACH24GROUP-3ELECTRICALELECTRICAL1RVX6316627038BOX,ELECTRICAL, wall mount with clamp on cover and polyurethane gasker, 6" x 6" x 4" deep, no KOs, NEMA 4, 316L SS, FCV-4522EACH2GROUP-3ELECTRICALELECTRICALH036HUBBELLBN4060604SSA316726956BOX,ELECTRICAL, wall mount with screw on cover and neoprene gasker, 6" x 6" x 4" deep, no KOs, carbon steel with polyester powder finish, DAF alarmsEACH6GROUP-3ELECTRICALELECTRICALWA060604GSC316828325BOX,Roll Cab, Double Bank, 11 Drawers, RedEACH3GROUP-3ELECTRICALELECTRICALS049SNAP-ONKRL722BPBO316931217BOX,STUFFING, HEAD, FRAME 12MF21-6AEACH4GROUP-3ELECTRICALELECTRICAL06018-075317026710BOX,TOOL, Attache Tool Case; Color: Black; Material: Plastic; Width (Inch): 33-3/8; Depth (Inch): 28-7/16; Height (Inch): 18-1/4; Certifications: IP67EACH1GROUP-3ELECTRICALELECTRICAL317126712BOX,TOOL, Attache Tool Case; Type: Equipment Case; Color: Black; Material: Structural Resin; Width (Inch): 17-1/2EACH1GROUP-3ELECTRICALELECTRICAL317226711BOX,TOOL, Attache Tool Case; Type: Micro Case; Color: Black; Material: Polycarbonate; Width (Inch): 9-3/8; Depth (Inch): 5-9/16; Height (Inch): 2-5/8EACH1GROUP-3ELECTRICALELECTRICAL0679761731738568BREAKER, :600VAC/250VDC, 3P, 30A, 65KAICEACH2GROUP-3ELECTRICALELECTRICALW035WESTINGHOUSEHFD3030317426326BREAKER, 150 VCP-W100, Cutler Hammer, MFR # 211149-1, SKU # 93F7339EACH3GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)211149-1317526179BREAKER, 2 PHASE, 30A, 250VDCEACH1GROUP-3ELECTRICALELECTRICALS007SCHNEIDER ELECTRICFIL26030317626445BREAKER, 3000A MAGNUM OS DRAW-OUT BREAKER, MDS-630, CODE WCNEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)MDS6303WEA317726183BREAKER, 30A, 2 POLEEACH1GROUP-3ELECTRICALELECTRICALS007SCHNEIDER ELECTRICFIL36030317826015BREAKER, 3P 400A LAL MAG-GARD THERMAL MAGNETIC CIRCUIT BREAKEREACH1GROUP-3ELECTRICALELECTRICALLAL3640035M317926378BREAKER, 5000A MAIN, TIE AND MAIN DOUBLE-WIDE MAGNUMDS DRAW-OUT BREAKER, MDS-850, CODE 34B9EACH4GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)MDS8503WEA318026379BREAKER, 600A MAGNUM DS DRAW-OUT FEEDER BREAKERS, MDS-808, CODE VBSEACH4GROUP-3ELECTRICALELECTRICAL318126182BREAKER, 60A, 3 POLEEACH1GROUP-3ELECTRICALELECTRICALS007SCHNEIDER ELECTRICFIL36060318226181BREAKER, 70A, 600VEACH1GROUP-3ELECTRICALELECTRICALFIL26070318326449BREAKER, 800A MAGNUM OS DRAW-OUT FEEDER BREAKERS, MDN-608, CODE 28HEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)MDN6083XEA318427419BREAKER, B250EACH4GROUP-3ELECTRICALELECTRICALS122SIEMENS USAB250318527420BREAKER, B350, 3 POLE 50 AMP, MOLDED CASE, SIEMENS PANELBOARDS, 240 VOLTSEACH1GROUP-3ELECTRICALELECTRICALS122SIEMENS USA3CNC1318629709BREAKER, BAB MOLDED CASE CIRCUIT BREAKER, 2 POLE, 40 AMPEACH1GROUP-3ELECTRICALELECTRICALBAB2040318729708BREAKER, BAB MOLDED CASE CIRCUIT BREAKER, 3 POLE, 50 AMPEACH1GROUP-3ELECTRICALELECTRICALBAB3050H318831369BREAKER, BHL, 20Amps, B, MOLDED CASE, 120/240, Siemens PanelboardsEACH1GROUP-3ELECTRICALELECTRICALS122SIEMENS USAB220H318926184BREAKER, BKR, CURRENT LIMITING, MOLDED CASE, 40A, 2P, 125VAC, 10KA/C, UNIT MOUNTINGEACH1GROUP-3ELECTRICALELECTRICALS007SCHNEIDER ELECTRICMG24137319022713BREAKER, BRANCH, 20A BAB 1 POLEEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)BAB1020319122716BREAKER, BRANCH, 20A GHB 3 POLEEACH1GROUP-3ELECTRICALELECTRICAL319222715BREAKER, BRANCH, 20A GHQ 1 POLEEACH1GROUP-3ELECTRICALELECTRICAL319322711BREAKER, BRANCH, 30A BAB 1 POLEEACH1GROUP-3ELECTRICALELECTRICALBAB1030319422712BREAKER, BRANCH, 30A BAB 2 POLEEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)BAB2030319522717BREAKER, BRANCH, 30A GHB 3 POLEEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)GHB3030319622718BREAKER, BRANCH, 60A GHB 3 POLEEACH1GROUP-3ELECTRICALELECTRICAL319729697BREAKER, BREAKER -MULTI PACK, SQUARE D QOB3100ZEACH1GROUP-3ELECTRICALELECTRICALQOB3100Z319829692BREAKER, BULK PACK RETURNABLE 20A BREAKEREACH1GROUP-3ELECTRICALELECTRICALQOB120RP319929847BREAKER, CHMDL TYPE, 3 POLE, 800 AMPSEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)CHMDL3800F320029798BREAKER, CHND FRAME, 1200 AMPEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)CHND312T33W320125589BREAKER, CIRCUIT BREAKER (QOB) STANDARD, 20A, 2-POLE, 120/240 VAC, 1-PHASE, 22KAEACH4GROUP-3ELECTRICALELECTRICALS066SQUARE DQOB220VH320225127BREAKER, CIRCUIT BREAKER 8A, HYDRAULIC POWER PACK MAIN CONTROL PANEL, 60 VDCEACH1GROUP-3ELECTRICALELECTRICALA005ABBS201-K8320333074BREAKER, CIRCUIT BREAKER, BOLTEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DQOB23032041994BREAKER, CIRCUIT, 120/240VAC, 2POLE, 20AMP, 10KAIC,THERMAL MAGNETICEACH2GROUP-3ELECTRICALELECTRICALW035WESTINGHOUSEBAB2020320522618BREAKER, CIRCUIT, 2 A ONE POLEEACH1GROUP-3ELECTRICALELECTRICALWMS1D02320626453BREAKER, EATON BREAKER, 30 AMP, 4 POLE, TYPE HFDEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)HFD4030L320729677BREAKER, EDB CIRCUIT BREAKER, E- FRAME, "D" INTERRUPTING LEVEL 18KA AT 480/277 VAC, 1- POLE 20 AMPEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DEDB14020320829678BREAKER, EDB CIRCUIT BREAKER, E- FRAME, "D" INTERRUPTING LEVEL 18KA AT 480/277 VAC, 2 POLE 20 AMPEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DEDB24020320929704BREAKER, EGH MOLDED CASE CIRCUIT BREAKER, 2 POLE, 20 AMPEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)EGH2020FFB321029705BREAKER, EGH MOLDED CASE CIRCUIT BREAKER, 3 POLE, 20 AMPEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)EGH3020FFB321129706BREAKER, EGH MOLDED CASE CIRCUIT BREAKER, 3 POLE, 30 AMPEACH1GROUP-3ELECTRICALELECTRICALEGH3030FFB321229702BREAKER, EGH MOLDED CASE CIRCUIT BREAKER, 3 POLE, 40 AMPEACH1GROUP-3ELECTRICALELECTRICALEGH3040FFB321329703BREAKER, EGH MOLDED CASE CIRCUIT BREAKER, 3 POLE, 70 AMPEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)EGH3070FFB321429679BREAKER, EJB CIRCUIT BREAKER, 3 POLE, 20 AMPEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DEJB34020321529682BREAKER, EJB MOLDED CASE CIRCUIT BREAKER, 1 POLE, 20 AMP, E-FRAME, 277 VACEACH1GROUP-3ELECTRICALELECTRICALEJB14020321629683BREAKER, EJB MOLDED CASE CIRCUIT BREAKER, 1 POLE, 30 AMP, E-FRAME, 277 VACEACH1GROUP-3ELECTRICALELECTRICALELB14030321729684BREAKER, EJB MOLDED CASE CIRCUIT BREAKER, 3 POLE, 30 AMP, E-FRAME, 480 / 277 VACEACH1GROUP-3ELECTRICALELECTRICALEJB34030321829685BREAKER, EJB MOLDED CASE CIRCUIT BREAKER, 3 POLE, 40 AMP, E-FRAME, 480 / 277 VACEACH1GROUP-3ELECTRICALELECTRICALEJB34040321929686BREAKER, EJB MOLDED CASE CIRCUIT BREAKER, 3 POLE, 60 AMP, E-FRAME, 480 / 277 VACEACH1GROUP-3ELECTRICALELECTRICALEJB34060322029687BREAKER, EJB MOLDED CASE CIRCUIT BREAKER, 3 POLE, 80 AMP, E-FRAME, 480 / 277 VACEACH1GROUP-3ELECTRICALELECTRICALEJB34080322129707BREAKER, FD MOLDED CASE CIRCUIT BREAKER, 3 POLE, 20 AMPEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)FD3020322226298BREAKER, GHC, 80AMP, 480VAC/250VDC, 3POLEEACH2GROUP-3ELECTRICALELECTRICAL322329819BREAKER, HFD 125 AMP, 3 POLE, 600 VACEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)HFD3125322429799BREAKER, HFD 3P, 110AEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)HFD3110322528298BREAKER, HFD BREAKER, 3 POLE 30 amp, Site Runoff Pump Station 5 valve actuatorEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)HFD3030322629800BREAKER, HFD, 150 AMP, EATON HFD3150, 600 VOLTEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)HFD3150322729688BREAKER, HJ MOLDED CASE CIRCUIT BREAKER, H-FRAME, 3 POLE, 150 AMP, 600 / 250 VACEACH1GROUP-3ELECTRICALELECTRICALHJL36150RP322829801BREAKER, HJD, 250 AMP , EATON HJD3250FB1EACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)HJD3250FB1322922672BREAKER, HKCEACH5GROUP-3ELECTRICALELECTRICAL323029802BREAKER, HKD 400 AMP FRAME, EATON HKD3400FB1EACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)HKD3400FB1323129845BREAKER, HMCP 7 AMP, 600 VAC / 250VDC, EATON HMCP007C0CEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)HMCP007C0C323222671BREAKER, HNCEACH1GROUP-3ELECTRICALELECTRICAL323329699BREAKER, MAIN BREAKER 150A/3P, 240VAC,TYPE QBLEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DQBL32150323426332BREAKER, MAIN PANEL, 80 AMP, 2 POLEEACH4GROUP-3ELECTRICALELECTRICAL323522709BREAKER, MAIN, 150A EDB 3 POLEEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)EDB3150323622714BREAKER, MAIN, 400A KD 3 POLEEACH1GROUP-3ELECTRICALELECTRICAL323731137BREAKER, MINIATURE CIRCUIT BREAKER, 10A, 1 POLE, 3.46 x .69 x 2.98 IN, S200U SERIES, 240 VACEACH1GROUP-3ELECTRICALELECTRICALA005ABBS201U-K10323828139BODY,CONDUIT OUTLET, C type, Form 7, threaded, snap tight cover, 3/4"EACH15GROUP-3ELECTRICALELECTRICALC114CROUSE HINDSC27323928140BODY,CONDUIT OUTLET, L type, Form 7, threaded, snap tight cover, 3/4"EACH15GROUP-3ELECTRICALELECTRICALC114CROUSE HINDSL27324028141BODY,CONDUIT OUTLET, LB type, Form 7, threaded, snap tight cover, 3/4"EACH15GROUP-3ELECTRICALELECTRICALCRHLB27324128142BODY,CONDUIT OUTLET, LL type, Form 7, threaded, snap tight cover, 3/4"EACH15GROUP-3ELECTRICALELECTRICALCRHLL27324228143BODY,CONDUIT OUTLET, LR type, Form 7, threaded, snap tight cover, 3/4"EACH15GROUP-3ELECTRICALELECTRICALC114CROUSE HINDSLR27324328144BODY,CONDUIT OUTLET, T type, Form 7, threaded, snap tight cover, 3/4"EACH50GROUP-3ELECTRICALELECTRICALC114CROUSE HINDST27324428985BOOK, Electrical Estimating Professional Reference, Publisher : Cengage LearningEACH1GROUP-3ELECTRICALELECTRICAL9HM48324528702BOOK, Electrical Estimating Textbook, 2nd Edition, 256 pagesEACH1GROUP-3ELECTRICALELECTRICALEST2B324626292BOOK, Electrical ReferencesEACH1GROUP-3ELECTRICALELECTRICAL10451324728579BOOK, Electrical, The Taunton Press, 7th EditionEACH70GROUP-3ELECTRICALELECTRICALCODE CHECK324828329BOOK, Electrician Exam Preparation & Journeyman Simulated Exam, 2011, based on NECEACH1GROUP-3ELECTRICALELECTRICAL11EPJX324928706BOOK, National Electrical Code Handbook, 2014EACH1GROUP-3ELECTRICALELECTRICALN042NATIONAL FIRE PROTECTION70HBK14325028251BOOK, National Electrical Code Prior YearsEACH1GROUP-3ELECTRICALELECTRICAL5WMU8325128249BOOK, National Electrical Code Softbound 2014EACH1GROUP-3ELECTRICALELECTRICAL29NT81325232047BOOK, reference handbook, Maintenance Planning & Scheduling Handbook, 3rd Edition, Richard (Doc) PalmerEACH2GROUP-3ELECTRICALELECTRICAL59963645325332607BOOK, reference, "Electrical Materials", 128 pagesEACH1GROUP-3ELECTRICALELECTRICAL13K604325432609BOOK, reference, "Thermography Principles", 72 pagesEACH1GROUP-3ELECTRICALELECTRICALF059FLUKE USBOOK-ITP325531717BREAKER, MINIATURE CIRCUIT BREAKER, 15 AMP, 1 POLE, QO SERIES, 120 / 240 V ACEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DQOU115325631138BREAKER, MINIATURE CIRCUIT BREAKER, 15A, 3 POLE, 3.94 x 2.07 x 2.98 IN, S200UP SERIES, 480Y/277 VACEACH1GROUP-3ELECTRICALELECTRICALA005ABBS203UP-K15325731136BREAKER, MINIATURE CIRCUIT BREAKER, 5A, 1 POLE, 3.46 x .69 x 2.98 IN, S200U SERIES, 240 VACEACH1GROUP-3ELECTRICALELECTRICALA005ABBS201U-K5325831139BREAKER, MINIATURE CIRCUIT BREAKER, 5A, 3 POLE, 3.94 x 2.07 x 2.98 IN, S200UP SERIES, 480Y/277 VACEACH1GROUP-3ELECTRICALELECTRICALA005ABBS203UP-K5325926381BREAKER, MINIATURE CIRCUIT BREAKER, QCR, 10AAMP, 1 POLE, 120/240VEACH4GROUP-3ELECTRICALELECTRICAL326026383BREAKER, MINIATURE CIRCUIT BREAKER, QCR, 10AMP, 2 POLE, 120/240VEACH4GROUP-3ELECTRICALELECTRICAL326126382BREAKER, MINIATURE CIRCUIT BREAKER, QCR, 15AMP, 1 POLE, 120/240VEACH4GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)QCR1015326229672BREAKER, MOLDED CASE CIRCUIT BREAKER 15 AMP, 3 POLE, 600 VACEACH1GROUP-3ELECTRICALELECTRICALHJA36015RP326329673BREAKER, MOLDED CASE CIRCUIT BREAKER 20 AMP, 3 POLE, 600 VACEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DHJA36020RP326429674BREAKER, MOLDED CASE CIRCUIT BREAKER 30 AMP, 3 POLE, 600 VACEACH1GROUP-3ELECTRICALELECTRICALHJA36030RP326529675BREAKER, MOLDED CASE CIRCUIT BREAKER 60 AMP, 3 POLE, 600 VACEACH1GROUP-3ELECTRICALELECTRICALHJA36060RP326629676BREAKER, MOLDED CASE CIRCUIT BREAKER 80 AMP, 3 POLE, 600 VACEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DHJA36080RP326729681BREAKER, MOLDED CASE CIRCUIT BREAKER, 175 AMP, J-FRAME, 600 VOLTEACH1GROUP-3ELECTRICALELECTRICALJDP36175RP326829680BREAKER, MOLDED CASE CIRCUIT BREAKER, 225 AMP, J-FRAME, 600 VOLTEACH1GROUP-3ELECTRICALELECTRICALJDM36225RP326931716BREAKER, MOLDED CASE CIRCUIT BREAKER, 30 AMP, 3 POLE, 600 V ACEACH1GROUP-3ELECTRICALELECTRICAL48R175327029833BREAKER, MOLDED CASE CIRCUIT BREAKER, EATON CHLD3600F, 600 AMPS, 3 POLE, 3 PHASE, CHLD SERIES, 600 VOLTEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)CHLD3600F327129696BREAKER, MOLDED CASE CIRCUIT BREAKER, Q FRAME, 225A, 3 POLEEACH1GROUP-3ELECTRICALELECTRICALQBL32225327231715BREAKER, MOLDED CASE CIRCUIT BREAKER, THERMAL MAGNETIC, 15 AMP, 3 POLE, HD SERIES, 600 V ACEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DHDL36015327329694BREAKER, MOLDED CASE, CIRCUIT BREAKER, 1 POLE 120VAC 30 AMP, 10KAIC, BOLT ONEACH1GROUP-3ELECTRICALELECTRICALQOB130327429695BREAKER, MOLDED CASE, CIRCUIT BREAKER, 3 POLE 240VAC 60 AMP, 10KAIC, BOLT ONEACH1GROUP-3ELECTRICALELECTRICALQOB360327529698BREAKER, MOLDED CASE, CIRCUIT BREAKER, 3 POLE, 120 / 240VAC, 60 AMP, 10KAIC, BOLT ONEACH1GROUP-3ELECTRICALELECTRICALQOB260327626430BREAKER, TYPE EHD, EATON BREAKER, 70AMP, 2POLEEACH4GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)EHD2070L327726408BREAKER, TYPE FDC, 20AMP, 3POLEEACH4GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)FDC3020L327826410BREAKER, TYPE FDC, 30AMP, 4POLEEACH4GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)FDC4030L327926407BREAKER, TYPE FDC, 70AMP, 2POLEEACH4GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)FDC2070L328026431BREAKER, TYPE FDC, 70AMP, 3POLEEACH4GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)FDC3070L328126409BREAKER, TYPE FDC, 80AMP, 3POLEEACH4GROUP-3ELECTRICALELECTRICAL328226411BREAKER, TYPE HFD, 70AMP, 2POLEEACH4GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)HFD2070L328326297BREAKER, VACUUM, 1200A, 50 VCP-W350EACH4GROUP-3ELECTRICALELECTRICAL328410001BREAKER,CIRCUIT, ? V, ? POLE, 800 AEACH1GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)NB-3800PT328522607BREAKER,CIRCUIT, ? VOLTAGE, 1 POLE, 5 AEACH2GROUP-3ELECTRICALELECTRICALS066SQUARE D60106328630318BREAKER,CIRCUIT, 120 volt, 1-pole, 30 amp, 10K interrupt capacity, type THQB, HACREACH2GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRICRT-692328723458BREAKER,CIRCUIT, 120/240 VAC, 2 pole, 40 amp, 10,000 amp interrup capacity, QOEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DQO240328832338BREAKER,CIRCUIT, 120/240 VAC, 2-pole, 20 amps, plug-in, molded case, internal common trip barEACH4GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRICTHQP220328932444BREAKER,CIRCUIT, 120/240 VAC, 2-pole, 30 amp, 10kA max AIR, THQBEACH1GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRICTHQB2130329032809BREAKER,CIRCUIT, 120/240 VAC, 2-pole, single throw, 70 amp, 10 kA interrupt current, bolt-inEACH2GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)BAN2070329133013BREAKER,CIRCUIT, 120/240 volt, 2-pole, 100 amp, 100kA interrupt capacity, QOB series, bolt-in, Solids mechanic shop parts washerEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DQOB2100329227469BREAKER,CIRCUIT, 120/240 volt, single pole, 20 ampEACH20GROUP-3ELECTRICALELECTRICALS066SQUARE DHOM120329328344BREAKER,CIRCUIT, 120/277 volt, two pole, 30 amp, molded case, series C, NEMA G-frameEACH1GROUP-3ELECTRICALELECTRICALC119CUTLER HAMMERCHB GB2030329432748BREAKER,CIRCUIT, 230Volt, 3 pole, 100AmpEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE D8539EG3V84CFFH30P91P92TX11329528449BREAKER,CIRCUIT, 240 volt, 3 pole, 100 amp, 10kA@240Vac, molded case, Gravity Thickener Heat Exchanger Building, Powerpact, Trip Range Hold: 1200A - Trip: 2400AEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DQBL32100329622746BREAKER,CIRCUIT, 240 VOLTAGE, 2 POLE, 25 AMP, GFIEACH1GROUP-3ELECTRICALELECTRICAL329729750BREAKER,CIRCUIT, 240, 3, 150, MOLDED CASE, CSO MAIN BREAKEREACH3GROUP-3ELECTRICALELECTRICALS122SIEMENS USAQJH23B150329827190BREAKER,CIRCUIT, 480 volt, 3 pole, 5.5 - 8 amp adjustable, 104 amp instantaneouse short circuit release, 65kA short-circuit breaking capacity, motor starter protector, type E, nitrification seal water pump motors, use with 3RT1016-1AK61 contactorEACH2GROUP-3ELECTRICALELECTRICALSIE 3RV1021-1HA10329927177BREAKER,CIRCUIT, 480 volt, 3-pole, 30 amp, interrupt rating 65kA 2 480V, FCB, molded case, Solids bldg garage door, this breaker is discontinued and can only be bought as reconditioned with 1-year warranteeEACH1GROUP-3ELECTRICALELECTRICALFCB34030330029382BREAKER,CIRCUIT, 480 VOLTS, 3, 70, 22KA @ 480 VOLTS, MOLDED CASE, C SERIES, EASTERN AVENUE STORM PUMPSEACH4GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)GD3070330131196BREAKER,CIRCUIT, 480/277 VAC, 2-pole, 15 amp, 65kA @ 480/277 VAC, molded case TEYL, bolt on, includes load lugs, 1" wide per pole, 14 - 10 AWG wireEACH1GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRICTEYL2015B330228682BREAKER,CIRCUIT, 480VAC, N/A, 30A, RATING PLUG, GE BREAKER PANELEACH6GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRIC3HWZ1330331824BREAKER,CIRCUIT, 480Y/277, 3-pole, 30 amp, miniature molded caseEACH3GROUP-3ELECTRICALELECTRICALS066SQUARE DEHB34030330432251BREAKER,CIRCUIT, 480Y/277VAC, 2-pole, 30 amp, 14,000 amps @ 480/277, molded case, panel board mount (bolted), 100 amp frameEACH2GROUP-3ELECTRICALELECTRICALS122SIEMENS USABQD230330529922BREAKER,CIRCUIT, 480Y/277VAC, 3-pole, 30 amp, AIR/A nom 1, interrupt 25kA @ 240 VAC, 18kA @ 480Y/277VAC, HACR type, miniature, CMF 2nd floorEACH1GROUP-3ELECTRICALELECTRICALS066SQUARE DEDB34030330631591BREAKER,CIRCUIT, 600 V, 3 pole, 100 amp, 65 kA interrupt, electronic trip, COF feed to Security booth, Spectra, SE150EACH2GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRICSELA36AT0100330725339BREAKER,CIRCUIT, 600 V, 3 pole, 30 amp, 65 kA interrupt, electronic trip, Secondary reactor gates, Spectra, SE150, 150 frame ratingEACH1GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRICSELA36AT0030330825101BREAKER,CIRCUIT, 600 VAC, 250 VDC, 3 pole, 15 max cont amps, molded case, HFD thermal magnetic with non-interchangeable trip unit, Traveling Bridges, style 6639C98G84EACH1GROUP-3ELECTRICALELECTRICALHFD3015L330932821BREAKER,CIRCUIT, 600 VAC, 3-pole, 125 amp non-interchangeable adjustable trip unit, 200 kA interrupt, molded case, internally fused, 400 amp frame, East Secondary MCC A/CEACH1GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRICTB43125331030858BREAKER,CIRCUIT, 600VAC, 3, 60, Interchangeable Rating Plug, SEEACH4GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRICGED SELA36AI0060331131374BREAKER,CIRCUIT, molded case, electronic, 600 VAC, three-pole, max. cont. amp rating at 40C, 1200 amp, 65kA interrupting current, interchangable rating plug, ORPN12A___, trip model 1050, trip type LSIG, without terminalsEACH2GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)HND312T106W331219275BREAKER: 150VCPW 1000, 1200A 60HZ, 125VDCEACH6GROUP-3ELECTRICALELECTRICALE008EATON CORPORATION (AKA CUTLER HAMMER)8075A37G02331319736BRUSH, BLOCK, 4.7" OAH x 0.625" W, 43" OAL, 040TLEACH21GROUP-3ELECTRICALELECTRICALO026OSBORN0007432000331429866BRUSH, tube, 0.0050 wire bristel, galvanized steel handle, 4" long, 1/4" diameter, SS, helical,EACH2GROUP-3ELECTRICALELECTRICAL03715042331529865BRUSH, tube, 0.0050 wire bristel, galvanized steel handle, 4" long, 3/8" diameter, SS, helical,EACH2GROUP-3ELECTRICALELECTRICAL03715067331629868BRUSH, tube, 0.0050 wire bristel, galvanized steel handle, 4" long, 5/16" diameter, SS, helical,EACH2GROUP-3ELECTRICALELECTRICAL03715059331729869BRUSH, tube, 0.0060 wire bristel, galvanized steel handle, 2-1/2" brusl length, 5-1/2" OAL, 1" diameter, SS, helical,EACH2GROUP-3ELECTRICALELECTRICAL03715117331822953BRUSH,ELECTRICAL, 2"long, 1.25"w, 0.5"h, carbon, 4" shunt, RWWP-4W and 5WEACH8GROUP-3ELECTRICALELECTRICALH018HELWIG CARBON PRODUCTS INC14125020102203331922704BRUSH,ELECTRICAL, motor, 1.5", 7/8", 3/8", carbon, 3" shunt, Filter Influent pumps 1-10EACH12GROUP-3ELECTRICALELECTRICALH018HELWIG CARBON PRODUCTS INC10-378716-400-1-01332027637BRUSH,WIRE, 3 rows, 19 columns, 13-11/16" OAL,EACH8GROUP-3ELECTRICALELECTRICALO026OSBORN53502209332126508BULB, # SR-120PSBR (R= red)EACH10GROUP-3ELECTRICALELECTRICALL023LIMITORQUE (FLOWSERVE)SR-120PSBR332231515BULB, 250 Watt - BT28 - Metal Halide, 250W, 120/230V, 3.5 in.x8.31 in.EACH48GROUP-3ELECTRICALELECTRICALS096SYLVANIAMP250/BU332324313BULB, 4' TSO, 54 WATT, LIGHTING FIXTUREEACH20GROUP-3ELECTRICALELECTRICAL4-54 TSO332431207BULB, BA15D, 75WATTS, 24 VOLTSEACH12GROUP-3ELECTRICALELECTRICALS007SCHNEIDER ELECTRICDL1BDB1332532745BULB, BAYONET/BA9S, 945 mW, 6.3V, T-3 1/4 (10mm), GLASS, LIGHTINGEACH12GROUP-3ELECTRICALELECTRICALS096SYLVANIA35763332633077BULB, GE, 25W, 130Volt, 1.25x3EACH24GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRIC90905332732841BULB, Halogen PARIncandescent Lamp, 75 Watt, 130Volt, Diameter 4.75 in. - Length M.O.L. 5.31 in, For Indoor And Outdoor FloodlightEACH12GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRIC76143332832491BULB, Halogen, 100 Watt, 120V, Length 2.44 in.and diameter 0.5in, clear hallogen bulbEACH30GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRIC15508332933066BULB, HIGH PRESSUE SODIUM, 100EACH24GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRICLU0100-13250333016689BULB, HIGH PRESSURE SODIUM, 100W, CLEAR, MOGUL BASEEACH72GROUP-3ELECTRICALELECTRICAL67514333126824BULB, High Pressure Sodium, S50 Lamp, 250W, N/A, Mogul Base, Glass, Hg, High Bay LightingEACH24GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRICLU250/H/ECO333222987BULB, INCANDESCENT A19, 100 W, 120 VEACH250GROUP-3ELECTRICALELECTRICAL5UCW0333332493BULB, Incandescent Medium (E26), 40 Watt, 120, Length 2.25in and diameter 1.75inEACH30GROUP-3ELECTRICALELECTRICALS120SatcoS4706333427437BULB, INCANDESCENT, 25 WATTS, 12VEACH2GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRIC6VK18333523300BULB, LED CLUSTER, 2W, 120V, SW STATIONEACH2GROUP-3ELECTRICALELECTRICALL023LIMITORQUE (FLOWSERVE)1125C5-120333623299BULB, LED CLUSTER, 2W, 120V, SW STATIONEACH2GROUP-3ELECTRICALELECTRICALL023LIMITORQUE (FLOWSERVE)1126C1-120333722605BULB, LIGHTEACH2GROUP-3ELECTRICALELECTRICALH028HOFFMANF6T5333826856BULB, LU70 HPS, 70, MEDIUM BASEEACH1GROUP-3ELECTRICALELECTRICALSATS3127333930706BULB, METAL HALIDE, 175, MOGUL BASEEACH49GROUP-3ELECTRICALELECTRICALS096SYLVANIA90500S334032978BULB, Miniature Bayonet Base, 3Watt, 120EACH25GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRICGE 12078334126852BULB, MP100, 100W, N/A, MEDIUM BASE, METAL HALIDE, HID LIGHT BULB/ LAMPEACH24GROUP-3ELECTRICALELECTRICALSATS5858334226506BULB, SR-120PSBC (C = clear).EACH20GROUP-3ELECTRICALELECTRICALL023LIMITORQUE (FLOWSERVE)SR-120PSBC (C: clear)334326507BULB, SR-120PSBG (G= Green)EACH10GROUP-3ELECTRICALELECTRICALL023LIMITORQUE (FLOWSERVE)SR-120PSBG334430299BULB, Tubular light bulb, 25, 130, 4.5 inches long, Glass, LightingEACH26GROUP-3ELECTRICALELECTRICALG012GENERAL ELECTRIC25T10/CL-130V T10334527005CABINET, BIN-BOX, 36" W X 78" H X 24" DEEP 126 BINS, SWAGELOKEACH1GROUP-3ELECTRICALELECTRICAL4491T63-1S334621544CARD, INPUT/OUTPUT, POWERFLEX753, 24v DCEACH1GROUP-3ELECTRICALELECTRICALA042ALLEN BRADLEY CO (ROCKWELL AUTOMTN)20-750-2262C-2R334728930CHASSIS, Controllogix, 7 slot, PLCEACH1GROUP-3ELECTRICALELECTRICALA042ALLEN BRADLEY CO (ROCKWELL AUTOMTN)1756-A7334825167CLAMP, HOSE CLAMP, MATERIAL, SPX25 HOSE PUMPEACH1GROUP-3ELECTRICALELECTRICALW016WATSON-MARLOW/BREDELC122505334928204CLAMP, Latch Type, 1.6 to 2.5 inches, Steel Galv., Safety Guards for rotating equipment.EACH25GROUP-3ELECTRICALELECTRICAL13435A61335023410CLAMP, SOCKET CLAMP 316SS 4", ., .EACH37GROUP-3ELECTRICALELECTRICALSP-N450SS-0032335127436CLAMP,CONDUIT, hanger, 1/2", steel, with bolt and nutEACH100GROUP-3ELECTRICALELECTRICALSTC6H0-B 6H335221993CLAMP,CONDUIT, Metal framing, 3/4", steel, universalEACH12GROUP-3ELECTRICALELECTRICALP039POWER-STRUT1300AS 3/433537926CLAMP,HOSE, 1-3/16", ZINC-PLATE STL. BAND,1-3/16"EACH3GROUP-3ELECTRICALELECTRICAL335429648CLAMP,HOSE-TUBING, 11/16"-1-1/2" #5416, AluminiumEACH5GROUP-3ELECTRICALELECTRICAL12541633556983CLAMP,LEAK BELL JOINT,STEEL,30"EACH13GROUP-3ELECTRICALELECTRICAL33568035CLAMP,LEAK BELL JOINT,STEEL,36"EACH1GROUP-3ELECTRICALELECTRICALS2740000379600033571359CLAMP:1",STL,INSULATOR SUPPORT BEAMEACH50GROUP-3ELECTRICALELECTRICALT026THOMAS & BETTS54065818335827082CLEANER, AEROSOL, CAN, Contact Cleaner 2000, Precision CleanerEACH12GROUP-3ELECTRICALELECTRICALC112CRC INDUSTRIES INC654-2140335930369COIL, Single, 400AEACH2GROUP-3ELECTRICALELECTRICALA042ALLEN BRADLEY CO (ROCKWELL AUTOMTN)80026-230-01-R336025703COIL, TRIP C