DD-Commands.rtf

7/30/2019 DD-Commands.rtf

1/30

Script started on Mon Mar 5 13:18:58 2012bash-3.2# ssh [email protected] Domain OS 5.0.2.3-259543Password:Last login: Mon Mar 5 13:01:38 CST 2012 from 10.10.10.10 on pts/0Last login: Mon Mar 5 13:14:50 2012 from 10.10.10.10

Welcome to Data Domain OS 5.0.2.3-259543----------------------------------------ciime@dd-cablevision# enclosure show controllers 2Encl 2

Model ES20Capacity 16 SlotsWWN 50050CC10011BD78Serial # 50050CC10011BD78Number of Controllers 2

Controller AWWN 50050CC1013D68EFFirmware 0605 R02Serial # IMS8579313D68EFStatus OKHOST port 12.0 Gbps

EXP'N port 12.0 GbpsController BWWN 50050CC1013D649FFirmware 0605 R02Serial # IMS8579313D649FStatus OKHOST port 12.0 GbpsEXP'N port 12.0 Gbps

ciime@dd-cablevision# enclosure show topologyPort enc.ctrl.port enc.ctrl.port enc.ctrl.port---- - ------------- - ------------- - -------------2a2b > 4.B.H: 4.B.E > 2.B.H: 2.B.E > 3.B.H: 3.B.E

2c2d3a > 3.A.H: 3.A.E > 2.A.H: 2.A.E > 4.A.H: 4.A.E3b3c3d---- - ------------- - ------------- - -------------Encl WWN Serial #---- ---------------- ---------------2 50050CC10011BD78 SHU0945847LB47H3 50050CC10011BB48 SHU0945847LB47C4 50050CC10011B35E SHU0945847LB453---- ---------------- ---------------

Error Message:-----------------No error detected-----------------Enclosure rear view:

CONTROLLER-B CONTROLLER-A OP-PANEL+--------------------------------------------------------+| | E | H | || | | | || | H | E | |


2/30

+--------------------------------------------------------+

ciime@dd-cablevision# enclosure show topologybeacon 2Invalid command "enclosure show beacon 2", showing help:

Commands matching "enclosure show":enclosure show all [] Show all enclosure environmentalsenclosure show controllers []

Show status of enclosure controllersenclosure show fans [] Show status of enclosure fansenclosure show powersupply []

Show status of enclosure powersuppliesenclosure show summary Show enclosure summaryenclosure show temperature-sensors []

Show status of enclosure temperaturesensors

enclosure show topology Show topology of all the enclosures

ciime@dd-cablevision# enclosure show beacon 2bbbbbStart LED beaconing...

LED beaconing completed.ciime@dd-cablevision# enclosure show allEnclosure 1

Fans Description Level Status----------- ----- ------FAN 1 low OKFAN 2 low OKFAN 3 low OKFAN 4 low OKFAN 5 low OKFAN 6 low OKFAN 7 low OKFAN 8 low OK----------- ----- ------

Temperature

Description C/F Status-------------- ------ ------MLB TEMP 1 38/100 OKMLB TEMP 2 18/64 OKFP TEMP 17/63 OKBP LEFT TEMP 23/73 OKBP MIDDLE TEMP 21/70 OKBP RIGHT TEMP 17/63 OKLP TEMP 41/106 OKFHFL TEMP 43/109 OKCPU 0 TEMP 28/82 OKCPU 1 TEMP 27/81 OK-------------- ------ ------

Power SupplyDescription Status--------------- ------Power Module #1 OKPower Module #2 OK--------------- ------

Enclosure 2Fans

Description Level Status------------------- ----- ------


3/30

Power module #1 fan low OKPower module #2 fan low OK------------------- ----- ------

TemperatureDescription C/F Status---------------- ----- ------Internal ambient 36/97 OK---------------- ----- ------


Enclosure 3Fans

Description Level Status------------------- ----- ------Power module #1 fan low OKPower module #2 fan low OK------------------- ----- ------

TemperatureDescription C/F Status---------------- ----- ------

Internal ambient 36/97 OK---------------- ----- ------Power Supply

Description Status--------------- ------Power Module #1 OKPower Module #2 OK--------------- ------

Enclosure 4Fans

Description Level Status------------------- ----- ------Power module #1 fan low OK

Power module #2 fan low OK------------------- ----- ------Temperature

Description C/F Status---------------- ----- ------Internal ambient 35/95 OK---------------- ----- ------


ciime@dd-cablevision# enclosure show allsummaryEnclosure Model No. Serial No. Capacity--------- --------- --------------- --------1 DD890 1F41526125 4 Slots2 ES20 SHU0945847LB47H 16 Slots3 ES20 SHU0945847LB47C 16 Slots4 ES20 SHU0945847LB453 16 Slots--------- --------- --------------- --------4 enclosures present.ciime@dd-cablevision# enclosure show all 2


4/30

Enclosure 2Fans

Description Level Status------------------- ----- ------Power module #1 fan low OKPower module #2 fan low OK------------------- ----- ------

TemperatureDescription C/F Status---------------- ----- ------Internal ambient 36/97 OK---------------- ----- ------


ciime@dd-cablevision# help

Help is available on the following topics:

adminaccess disk ntpalerts enclosure replication

alias filesys routearchive ipmi snapshotauthentication license snmpautosupport log storagecifs mtree supportcluster ndmpd systemconfig net userddboost nfs vtl

Type "help " to view help for the given topic.

Type "help " to search the commands for a specific keyword.For example, "help timezone" shows all commands relating to timezones.

ciime@dd-cablevision# file ssysInvalid command "filesys", showing help:

Commands matching "filesys":filesys archive unit add Creates an archive unit from the

archive tier and adds it to thefilesystem

filesys archive unit del Deletes the given archive unit

filesys archive unit expand Expands the size of the archive unit

filesys archive unit list [ | all]

Lists the given archive unitfilesys clean reset {schedule | throttle | all}

Reset (to default) the schedulefilesys clean set schedule [daily | monthly | never]

Schedule when cleaning startsfilesys clean set throttle

Set cleaning throttle (100 => fastest,0 => slowest)

filesys clean show config Show the cleaning configurationfilesys clean show schedule Show the cleaning schedule


5/30

filesys clean show throttle Show the cleaning throttlefilesys clean start Start cleaning nowfilesys clean status Show cleaning statusfilesys clean stop Stop the cleaning operationfilesys clean watch Monitor cleaning processfilesys create Creates a filesystem with the active

tier storagefilesys destroy [and-zero] Reinitialize the file system,

destroying all datafilesys disable Disable file system operationsfilesys enable Enable file system operationsfilesys encryption algorithm reset Reset the encryption algorithm to

default (aes_256_cbc)filesys encryption algorithm set

{aes_128_cbc | aes_256_cbc | aes_128_gcm | aes_256_gcm}Set the encryption algorithm

filesys encryption algorithm show Show the encryption algorithmfilesys encryption apply-changes Bring the filesystem up to date with

current encryption configurationfilesys encryption disable Disable encryptionfilesys encryption enable Enable encryptionfilesys encryption lock Lock the filesystemfilesys encryption passphrase change

Change the passphrase

filesys encryption show Show the encryption configurationfilesys encryption unlock Unlock the filesystemfilesys expand Expands the filesystem with the active

tier storagefilesys fastcopy source destination

Fastcopy from source to destinationfilesys option disable report-replica-as-writable

Disable filesys optionfilesys option enable report-replica-as-writable

Enable filesys optionfilesys option reset {local-compression-type | low-bw-optim | marker-type

| report-replica-as-writable | global-compression-type| staging-reserve | staging-clean | staging-delete-suspend

| compute-segfeatures} Reset (to default) filesys optionsfilesys option set global-compression-type {1 | 9}

Set global compression typefilesys option set local-compression-type {none | lz | gzfast | gz}

Set compression typefilesys option set staging-reserve

Set staging reserve percentage from 0to 90

filesys option show [{local-compression-type | low-bw-optim | marker-type| report-replica-as-writable | global-compression-type| staging-reserve | staging-clean | staging-delete-suspend| compute-segfeatures}]

Show filesys optionsfilesys restart Restart the filesystemfilesys show compression [] [last { hours | days }] [no-sync]filesys show compression [summary | daily | daily-detailed]

{[last { hours | days | weeks | months }]| [start [end ]]}

Show file system compression statisticsfilesys show file-info Shows the file informationfilesys show space Show the file system space reportfilesys show uptime Show the file system uptime report


6/30

filesys status Show whether or not the file system isrunning

filesys sync Sync all modified files to disk

ciime@dd-cablevision# filesys statusThe filesystem is enabled and running.ciime@dd-cablevision# filesys show file-info datao

**** Missing one or more required arguments.

Incomplete syntax "filesys show file-info", showing help:filesys show file-info Shows the file information

ciime@dd-cablevision# silesysyfilesys show space

Active Tier:Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB---------------- -------- -------- --------- ---- -------------/data: pre-comp - 0.0 - - -/data: post-comp 65880.5 0.1 65880.4 0% 0.0/ddvar 132.9 1.2 124.9 1% ----------------- -------- -------- --------- ---- -------------ciime@dd-cablevision# filesys destriyoy /dataciime@dd-cablevision# df

Active Tier:Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB---------------- -------- -------- --------- ---- -------------/data: pre-comp - 0.0 - - -/data: post-comp 65880.5 0.1 65880.4 0% 0.0/ddvar 132.9 1.2 124.9 1% ----------------- -------- -------- --------- ---- -------------ciime@dd-cablevision# filesys destroy /dataIncorrect syntax "filesys destroy /data", showing help:filesys destroy [and-zero] Reinitialize the file system, destroying all

data

ciime@dd-cablevision# filesys destroy dataIncorrect syntax "filesys destroy data", showing help:filesys destroy [and-zero] Reinitialize the file system, destroying all

data

ciime@dd-cablevision# filesys destroy

Only sysadmin may use this command.

ciime@dd-cablevision# sudo -sThat doesn't look like a valid command, displaying help...


adminaccess disk ntpalerts enclosure replicationalias filesys routearchive ipmi snapshotauthentication license snmpautosupport log storagecifs mtree supportcluster ndmpd systemconfig net user


7/30

ddboost nfs vtl



ciime@dd-cablevision# help


adminaccess disk ntpalerts enclosure replicationalias filesys routearchive ipmi snapshotauthentication license snmpautosupport log storagecifs mtree supportcluster ndmpd systemconfig net userddboost nfs vtl



ciime@dd-cablevision# exitConnection to 10.10.10.1 closed.bash-3.2# ssh [email protected] Domain OS 5.0.2.3-259543Password:Last login: Mon Mar 5 13:00:59 CST 2012 from 10.10.10.10 on pts/0Last login: Mon Mar 5 13:27:48 2012 from 10.10.10.10

Welcome to Data Domain OS 5.0.2.3-259543

----------------------------------------sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision# filesys destroy /dataIncorrect syntax "filesys destroy /data", showing help:filesys destroy [and-zero] Reinitialize the file system, destroying all

data

sysadmin@dd-cablevision# filsesysddestroy

The 'filesys destroy' command irrevocably destroys all data inall the MTrees, including all virtual tapes and archive units.The 'filesys destroy' operation will take about 10-11 minutes.File access is disabled during this process.

Are you sure? (yes|no|?) [no]: yes

ok, proceeding.


8/30

Please enter sysadmin password to confirm 'filesys destroy':.........The filesystem is now disabled.Destroying the filesystem.

The filesystem has been destroyed.sysadmin@dd-cablevision# dfFilesystem doesn't exist.Filesystem of size 64.56 TiB can be created.sysadmin@dd-cablevision# storegageInvalid command "storage", showing help:

Commands matching "storage":storage add [tier {active | archive}]

{enclosure | dev [spindle-group ]| disk . }

Adds storage to the specified tierstorage remove

{enclosure | dev| disk .}

Removes specified storage from its tierstorage show {all | summary | tier {active | archive}}

Show storage information

sysadmin@dd-cablevision# storage show allActive tier details:Disk Disks Count AdditionalGroup Information----------- ------------------------------- ----- -----------(spare) 2.15-2.16, 3.15-3.16, 4.15-4.16 6(available) 2.1-2.14, 3.1-3.14, 4.1-4.14 42----------- ------------------------------- ----- -----------sysadmin@dd-cablevision# storage remove enclosure 2

Removing enclosure 2...done

Updating system information...done

Enclosure 2 successfully removed.

sysadmin@dd-cablevision# storage show

**** Syntax error: exactly one argument [in a group of arguments] must be specified.

Incorrect syntax "storage show", showing help:storage show {all | summary | tier {active | archive}}

Show storage information

sysadmin@dd-cablevision# storage show allsummaryDisk States Active tier----------- -----------Spare 4Available 28TOTAL DISKS 32----------- -----------sysadmin@dd-cablevision# storage show allActive tier details:Disk Disks Count Additional


9/30

Group Information----------- -------------------- ----- -----------(spare) 3.15-3.16, 4.15-4.16 4(available) 3.1-3.14, 4.1-4.14 28----------- -------------------- ----- -----------

Storage addable disks:Disk Disks Count AdditionalType Information--------- -------- ----- -----------(unknown) 2.1-2.16 16--------- -------- ----- -----------sysadmin@dd-cablevision# storage remove enclosure 3

Removing enclosure 3...doneUpdating system information...done


sysadmin@dd-cablevision# enclosure show topologyPort enc.ctrl.port enc.ctrl.port enc.ctrl.port---- - ------------- - ------------- - -------------2a2b > 4.B.H: 4.B.E > 2.B.H: 2.B.E > 3.B.H: 3.B.E

2c2d3a > 3.A.H: 3.A.E > 2.A.H: 2.A.E > 4.A.H: 4.A.E3b3c3d---- - ------------- - ------------- - -------------Encl WWN Serial #---- ---------------- ---------------2 50050CC10011BD78 SHU0945847LB47H3 50050CC10011BB48 SHU0945847LB47C4 50050CC10011B35E SHU0945847LB453---- ---------------- ---------------

Error Message:-----------------No error detected-----------------Enclosure rear view:

CONTROLLER-B CONTROLLER-A OP-PANEL+--------------------------------------------------------+| | E | H | || | | | || | H | E | |+--------------------------------------------------------+

sysadmin@dd-cablevision# storage show all

Active tier details:Disk Disks Count AdditionalGroup Information----------- --------- ----- -----------(spare) 4.15-4.16 2(available) 4.1-4.14 14----------- --------- ----- -----------

Storage addable disks:Disk Disks Count Additional


10/30

Type Information--------- ------------------ ----- -----------(unknown) 2.1-2.16, 3.1-3.16 32--------- ------------------ ----- -----------sysadmin@dd-cablevision# storage remove enclosure 4



sysadmin@dd-cablevision# storage show allActive tier details:Active tier has no storage.

Storage addable disks:Disk Disks Count AdditionalType Information--------- ---------------------------- ----- -----------(unknown) 2.1-2.16, 3.1-3.16, 4.1-4.16 48--------- ---------------------------- ----- -----------sysadmin@dd-cablevision#

sysadmin@dd-cablevision#

sysadmin@dd-cablevision# config setup

Licenses ConfigurationConfigure Licenses at this time (yes|no) [no]: no

Network ConfigurationConfigure Network at this time (yes|no) [no]: yes

HostnameEnter the hostname for this system (fully-qualified domain name)[dd-cablevision.localdomain]:

Domainname

Enter your DNS domainname[localdomain]:

Ethernet port eth0aEnable Ethernet port eth0a (yes|no|?) [yes]:Use DHCP on Ethernet port eth0a (yes|no|?) [no]: noEnter the IP address for eth0a[10.10.10.1]:Enter the netmask for eth0a[255.255.255.0]:

Ethernet port eth0bEnable Ethernet port eth0b (yes|no|?) [no]: no

Ethernet port eth1aEnable Ethernet port eth1a (yes|no|?) [no]: no


Ethernet port eth4aEnable Ethernet port eth4a (yes|no|?) [no]: no


11/30


Default GatewayEnter the default gateway IP address: 10.10.

DNS ServersEnter the DNS Server list (zero, one, two or three IP addresses):

Pending Network SettingsHostname dd-cablevision.localdomainDomain name localdomainDefault GatewayDNS Server List DNS Server ListPort Enabled Cable DHCP IP Address Netmask----- ------- ----- ---- ---------- -------------eth0a yes yes no 10.10.10.1 255.255.255.0eth0b no no n/a n/a n/aeth1a no no n/a n/a n/aeth1b no no n/a n/a n/aeth4a no no n/a n/a n/aeth4b no no n/a n/a n/a

----- ------- ----- ---- ---------- -------------Do you want to save these settings (Save|Cancel|Retry): save

Filesystem ConfigurationConfigure Filesystem at this time (yes|no) [no]: no

System ConfigurationConfigure System at this time (yes|no) [no]: no

CIFS ConfigurationConfigure CIFS at this time (yes|no) [no]: no

NFS Configuration

Configure NFS at this time (yes|no) [no]: no

Configuration complete.sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision# storage show allActive tier details:Active tier has no storage.

Storage addable disks:Disk Disks Count Additional

Type Information--------- ---------------------------- ----- -----------(unknown) 2.1-2.16, 3.1-3.16, 4.1-4.16 48--------- ---------------------------- ----- -----------sysadmin@dd-cablevision# enclosure show topologyPort enc.ctrl.port enc.ctrl.port enc.ctrl.port---- - ------------- - ------------- - -------------2a2b > 4.B.H: 4.B.E > 2.B.H: 2.B.E > 3.B.H: 3.B.E2c


12/30

2d3a > 3.A.H: 3.A.E > 2.A.H: 2.A.E > 4.A.H: 4.A.E3b3c3d---- - ------------- - ------------- - -------------Encl WWN Serial #---- ---------------- ---------------2 50050CC10011BD78 SHU0945847LB47H3 50050CC10011BB48 SHU0945847LB47C4 50050CC10011B35E SHU0945847LB453---- ---------------- ---------------Error Message:-----------------No error detected-----------------Enclosure rear view:

CONTROLLER-B CONTROLLER-A OP-PANEL+--------------------------------------------------------+| | E | H | || | | | || | H | E | |+--------------------------------------------------------+

sysadmin@dd-cablevision# storage add tier active enclosure 2

Checking storage requirements...doneAdding enclosure 2 to the active tier...doneUpdating system information...done

Enclosure 2 successfully added to the active tier.

sysadmin@dd-cablevision# storage show allActive tier details:Disk Disks Count AdditionalGroup Information----------- -------- ----- -----------

(available) 2.1-2.16 16----------- -------- ----- -----------

Storage addable disks:Disk Disks Count AdditionalType Information--------- ------------------ ----- -----------(unknown) 3.1-3.16, 4.1-4.16 32--------- ------------------ ----- -----------sysadmin@dd-cablevision# storage add tier active enclosure 3

Checking storage requirements...doneAdding enclosure 3 to the active tier...done

Updating system information...done


sysadmin@dd-cablevision# storage show allActive tier details:Disk Disks Count AdditionalGroup Information----------- ------------------ ----- -----------(available) 2.1-2.16, 3.1-3.16 32


13/30

----------- ------------------ ----- -----------

Storage addable disks:Disk Disks Count AdditionalType Information--------- -------- ----- -----------(unknown) 4.1-4.16 16--------- -------- ----- -----------sysadmin@dd-cablevision# storage add tier active enclosure 4



sysadmin@dd-cablevision# filesysInvalid command "filesys", showing help:



filesys archive unit del

Deletes the given archive unitfilesys archive unit expand Expands the size of the archive unit

filesys archive unit list [ | all]Lists the given archive unit

filesys clean reset {schedule | throttle | all}Reset (to default) the schedule

filesys clean set schedule [daily | monthly | never] Schedule when cleaning starts

filesys clean set throttle Set cleaning throttle (100 => fastest,0 => slowest)

filesys clean show config Show the cleaning configuration

filesys clean show schedule Show the cleaning schedulefilesys clean show throttle Show the cleaning throttlefilesys clean start Start cleaning nowfilesys clean status Show cleaning statusfilesys clean stop Stop the cleaning operationfilesys clean watch Monitor cleaning processfilesys create Creates a filesystem with the active






current encryption configurationfilesys encryption disable Disable encryptionfilesys encryption enable Enable encryptionfilesys encryption lock Lock the filesystem


14/30

filesys encryption passphrase changeChange the passphrase

filesys encryption show Show the encryption configurationfilesys encryption unlock Unlock the filesystemfilesys expand Expands the filesystem with the active





| report-replica-as-writable | global-compression-type| staging-reserve | staging-clean | staging-delete-suspend| compute-segfeatures}

Reset (to default) filesys optionsfilesys option set global-compression-type {1 | 9}

Set global compression typefilesys option set local-compression-type {none | lz | gzfast | gz}

Set compression typefilesys option set staging-reserve

Set staging reserve percentage from 0to 90


Show filesys optionsfilesys restart Restart the filesystemfilesys show compression [] [last { hours | days }] [no-sync]filesys show compression [summary | daily | daily-detailed]


Show file system compression statisticsfilesys show file-info Shows the file informationfilesys show space Show the file system space report

filesys show uptime Show the file system uptime reportfilesys status Show whether or not the file system isrunning

filesys sync Sync all modified files to disk

sysadmin@dd-cablevision# filesys createA filesystem of approximate size 64.56 TiB will be created.

Do you want to continue? (yes|no) [yes]: no

user aborted the command

sysadmin@dd-cablevision# storage remove enclosure 4



sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision# storage show allActive tier details:


15/30

Disk Disks Count AdditionalGroup Information----------- ------------------ ----- -----------(available) 2.1-2.16, 3.1-3.16 32----------- ------------------ ----- -----------

Storage addable disks:Disk Disks Count AdditionalType Information--------- -------- ----- -----------(unknown) 4.1-4.16 16--------- -------- ----- -----------sysadmin@dd-cablevision# filesys create ciimeA filesystem of approximate size 42.76 TiB will be created.

Do you want to continue? (yes|no) [yes]: yes

ok, continuing.

This will take 5 - 10 minutes.

Provisioning storage...########################################### [5%]########################################### [100%]

Initializing filesystem...

########################################### [5%]########################################### [100%]You now have a freshly initialized filesystem.Enable the filesystem using 'filesys enable'.

sysadmin@dd-cablevision# filesys enablePlease wait.............The filesystem is now enabled.sysadmin@dd-cablevision# df

Active Tier:Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB---------------- -------- -------- --------- ---- -------------/data: pre-comp - 0.0 - - -

/data: post-comp 43647.3 0.0 43647.3 0% 0.0/ddvar 132.9 1.3 124.9 1% ----------------- -------- -------- --------- ---- -------------sysadmin@dd-cablevision# storage add tier active enclosure 4



sysadmin@dd-cablevision# storage show allActive tier details:

Disk Disks Count AdditionalGroup Information----------- -------------------- ----- -----------dg1 2.1-2.14 14dg2 3.1-3.14 14(spare) 2.15-2.16, 3.15-3.16 4(available) 4.1-4.16 16----------- -------------------- ----- -----------sysadmin@dd-cablevision# storage shfilesys expandThe filesystem will be expanded approximately by 21.80 TiB.


16/30


ok, proceeding.

########################################### [5%]########################################### [100%]The approximate size of the filesystem is 64.98 TiB.sysadmin@dd-cablevision# df

Active Tier:Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB---------------- -------- -------- --------- ---- -------------/data: pre-comp - 0.0 - - -/data: post-comp 65876.5 0.1 65876.4 0% 0.0/ddvar 132.9 1.3 124.9 1% ----------------- -------- -------- --------- ---- -------------sysadmin@dd-cablevision# disk portInvalid command "disk port", showing help:

Commands matching "disk port":disk port enable Allow I/O on specified initiator portdisk port show {stats | summary} Show disk port information

sysadmin@dd-cablevision# disk port show summaryPort Connection Link Connected Status

Type Speed Enclosure IDs---- ---------- ------- ------------- -------2a SAS offline2b SAS 12 Gbps 2, 3, 4 online2c SAS offline2d SAS offline3a SAS 12 Gbps 2, 3, 4 online3b SAS offline3c SAS offline3d SAS offline---- ---------- ------- ------------- -------sysadmin@dd-cablevision# disk mulrtipath statusPort Hops Status Disk

---- ---- ------- ----------2b 2 Active 2.1 - 2.82 Standby 2.9 - 2.163 Standby 3.1 - 3.161 Active 4.1 - 4.16

3a 2 Active 2.9 - 2.162 Standby 2.1 - 2.81 Active 3.1 - 3.163 Standby 4.1 - 4.16

---- ---- ------- ----------sysadmin@dd-cablevision# disk multipath option set monitor


Incomplete syntax "disk multipath option set monitor", showing help:disk multipath option set monitor {enabled | disabled}

Enable or disable multipath monitoring

sysadmin@dd-cablevision# disk multipath option set monitor enable

**** Invalid argument: "enable". Valid strings are: disabled, enabled.

sysadmin@dd-cablevision# disk multoipath option set monitor enabled


17/30

Multi-path configuration monitoring is already enabled.sysadmin@dd-cablevision# disk multipath statusPort Hops Status Disk---- ---- ------- ----------2b 2 Active 2.1 - 2.8

2 Standby 2.9 - 2.163 Standby 3.1 - 3.161 Active 4.1 - 4.16

3a 2 Active 2.9 - 2.162 Standby 2.1 - 2.81 Active 3.1 - 3.163 Standby 4.1 - 4.16

---- ---- ------- ----------sysadmin@dd-cablevision# df

Active Tier:Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB---------------- -------- -------- --------- ---- -------------/data: pre-comp - 0.0 - - -/data: post-comp 65876.5 0.1 65876.4 0% 0.0/ddvar 132.9 1.3 124.9 1% ----------------- -------- -------- --------- ---- -------------sysadmin@dd-cablevision# filesys statusThe filesystem is enabled and running.

sysadmin@dd-cablevision# filesys modeInvalid command "filesys mode", showing help:



filesys archive unit del Deletes the given archive unit

filesys archive unit expand Expands the size of the archive unit

filesys archive unit list [ | all]Lists the given archive unit

filesys clean reset {schedule | throttle | all}Reset (to default) the schedulefilesys clean set schedule [daily | monthly | never]

Schedule when cleaning startsfilesys clean set throttle

Set cleaning throttle (100 => fastest,0 => slowest)

filesys clean show config Show the cleaning configurationfilesys clean show schedule Show the cleaning schedulefilesys clean show throttle Show the cleaning throttlefilesys clean start Start cleaning nowfilesys clean status Show cleaning statusfilesys clean stop Stop the cleaning operation

filesys clean watch Monitor cleaning processfilesys create Creates a filesystem with the active





18/30



current encryption configurationfilesys encryption disable Disable encryptionfilesys encryption enable Enable encryptionfilesys encryption lock Lock the filesystemfilesys encryption passphrase change

Change the passphrasefilesys encryption show Show the encryption configurationfilesys encryption unlock Unlock the filesystemfilesys expand Expands the filesystem with the active





| report-replica-as-writable | global-compression-type| staging-reserve | staging-clean | staging-delete-suspend| compute-segfeatures}

Reset (to default) filesys optionsfilesys option set global-compression-type {1 | 9}Set global compression type

filesys option set local-compression-type {none | lz | gzfast | gz}Set compression type

filesys option set staging-reserve Set staging reserve percentage from 0to 90


Show filesys options

filesys restart Restart the filesystemfilesys show compression [] [last { hours | days }] [no-sync]filesys show compression [summary | daily | daily-detailed]


Show file system compression statisticsfilesys show file-info Shows the file informationfilesys show space Show the file system space reportfilesys show uptime Show the file system uptime reportfilesys status Show whether or not the file system is

runningfilesys sync Sync all modified files to disk

sysadmin@dd-cablevision# filesysdf

Active Tier:Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB---------------- -------- -------- --------- ---- -------------/data: pre-comp - 0.0 - - -/data: post-comp 65876.5 0.1 65876.4 0% 0.0/ddvar 132.9 1.3 124.9 1% ----------------- -------- -------- --------- ---- -------------sysadmin@dd-cablevision#


19/30

sysadmin@dd-cablevision# cifsInvalid command "cifs", showing help:

Commands matching "cifs":cifs add /backup Add a CIFS backup clientcifs add /ddvar Add a CIFS administrative clientcifs del /backup Delete a CIFS clientcifs del /ddvar Delete a CIFS clientcifs disable Disable CIFS clients from connectingcifs enable Enable CIFS clients to connectcifs hosts add

Add a lmhosts mappingcifs hosts del Remove a lmhosts mappingcifs hosts reset Reset (to default) the lmhosts mappingscifs hosts show Show lmhosts mappingscifs nb-lookup Resolve a NetBIOS name to IP addresscifs option reset Reset (to default) a CIFS optioncifs option set Set a CIFS optioncifs option show Show CIFS optionscifs reset authentication Reset (to default) CIFS authenticationcifs reset clients Reset (to default) the CIFS client listcifs reset nb-hostname Reset (to default) the NetBIOS hostnamecifs reset wins-server Reset (to default) the WINS Servercifs set authentication active-directory { [ [ ...]] | * }

Set mode to Active Directorycifs set authentication nt4 { [ []] | * }

Set mode to NT4 domaincifs set authentication workgroup

Set mode to workgroupcifs set nb-hostname Set the NetBIOS hostnamecifs set wins-server Set the WINS Server IPcifs share create path {max-connections

| clients | browsing {enabled | disabled}| writeable {enabled | disabled} | users | comment }

Create a new share

cifs share destroy Destroy a sharecifs share disable Disable a sharecifs share enable Enable a sharecifs share modify {max-connections


Modify a sharecifs share show [] Show shares configurationcifs show active Show the active CIFS clientscifs show clients Show all allowed CIFS clientscifs show config Show the CIFS configurationcifs show detailed-stats Show detailed CIFS statistics

cifs show stats Show CIFS statisticscifs status Show whether or not CIFS is enabledcifs troubleshooting domaininfo Show domain infocifs troubleshooting group | |

List one CIFS groupcifs troubleshooting list-groups List all CIFS groupscifs troubleshooting list-users List all CIFS userscifs troubleshooting performance Collect traces for CIFS performance

analysiscifs troubleshooting user | |


20/30

List one CIFS user

sysadmin@dd-cablevision#sysadmin@dd-cablevision# cifs share create ciime /data/ciime

**** A value must be supplied for the "/data/ciime" keyword.

sysadmin@dd-cablevision# cisffs share create ciime /data/ciime browser enableding enabled writable enabled

**** "/data/ciime" is an unknown keyword.

sysadmin@dd-cablevision# cifs share create ciime /path /data/ciime

**** Path must begin with /data or /backup or /ddvar.

sysadmin@dd-cablevision# cifs createshare create ciime /backup/path /backup/ciime** Directory "/backup/ciime" does not exist.Share "ciime" has been created.sysadmin@dd-cablevision# cifs shiowowInvalid command "cifs show", showing help:

Commands matching "cifs show":cifs show active Show the active CIFS clients

cifs show clients Show all allowed CIFS clientscifs show config Show the CIFS configurationcifs show detailed-stats Show detailed CIFS statisticscifs show stats Show CIFS statistics

sysadmin@dd-cablevision# cifs show active

PID Username Group Machine-------------------------------------------------------------------

Service pid machine Connected at-------------------------------------------------------

No locked files

sysadmin@dd-cablevision# cifs share enable ciimeShare "ciime" has been enabled.sysadmin@dd-cablevision# cifs show avctive



No locked files

sysadmin@dd-cablevision# cisf share show ciimeThat doesn't look like a valid command, displaying help...


adminaccess disk ntpalerts enclosure replication


21/30

alias filesys routearchive ipmi snapshotauthentication license snmpautosupport log storagecifs mtree supportcluster ndmpd systemconfig net userddboost nfs vtl



sysadmin@dd-cablevision# cifs share show ciimeShares information for: ciime

--------------- share ciime ---------------enabled: yespath: /backup/ciimeWARNING: The share path does not exist!sysadmin@dd-cablevision# df

Active Tier:

Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB---------------- -------- -------- --------- ---- -------------/data: pre-comp - 0.0 - - -/data: post-comp 65876.5 0.1 65876.4 0% 0.0/ddvar 132.9 1.3 124.9 1% ----------------- -------- -------- --------- ---- -------------sysadmin@dd-cablevision# cifs statusCIFS is enabled and running.sysadmin@dd-cablevision# cifs show configMode WorkgroupWorkgroup not specifiedWINS Server not specifiedNB Hostname not specified; using hostname: DD-CABLEVISION

Max Connections 600Max open files per connection 10000sysadmin@dd-cablevision# cifs showaacrtive



No locked files

sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision# cifs share disabled ciimeInvalid command "cifs share disabled ciime", showing help:

Commands matching "cifs share":cifs share create path {max-connections

| clients | browsing {enabled | disabled}


22/30

| writeable {enabled | disabled} | users | comment }

Create a new sharecifs share destroy Destroy a sharecifs share disable Disable a sharecifs share enable Enable a sharecifs share modify {max-connections


Modify a sharecifs share show [] Show shares configuration

sysadmin@dd-cablevision# cifs share disabled ciimeciimedisable ciimeShare "ciime" has been disabled.sysadmin@dd-cablevision# cifs share destroy ciimeAre you sure you want to destroy "ciime" share?


ok, proceeding.

Share "ciime" has been deleted.sysadmin@dd-cablevision# cifs show active



No locked files

sysadmin@dd-cablevision# cifs add /backup


Incomplete syntax "cifs add /backup", showing help:cifs add /backup Add a CIFS backup client

sysadmin@dd-cablevision# cifs add /backup 10/.10.10.10Successfully added clients to share "backup".** This command is deprecated. Use 'cifs share create' or 'cifs share modify'instead.

For more information see 'cifs share' commands.sysadmin@dd-cablevision# cifs share createdf

Active Tier:Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB---------------- -------- -------- --------- ---- -------------

/data: pre-comp - 0.0 - - -/data: post-comp 65876.5 0.1 65876.4 0% 0.0/ddvar 132.9 1.3 124.9 1% ----------------- -------- -------- --------- ---- -------------sysadmin@dd-cablevision#sysadmin@dd-cablevision# cifs share create ciime /path /backup/ciime** Directory "/backup/ciime" does not exist.Share "ciime" has been created.sysadmin@dd-cablevision# cifs share shoiw ciimeShares information for: ciime


23/30

--------------- share ciime ---------------enabled: yespath: /backup/ciimeWARNING: The share path does not exist!sysadmin@dd-cablevision# cifs statusCIFS is enabled and running.sysadmin@dd-cablevision# cifs share create ciime path /backup/ciime browsing enabled witteritteeable enbaabled

**** "ciime" share name already exists.

sysadmin@dd-cablevision# cifs share statusInvalid command "cifs share status", showing help:



Create a new sharecifs share destroy Destroy a sharecifs share disable Disable a sharecifs share enable Enable a share

cifs share modify {max-connections | clients | browsing {enabled | disabled}| writeable {enabled | disabled} | users | comment }


sysadmin@dd-cablevision# cifs share enabled ciimeInvalid command "cifs share enabled ciime", showing help:


| clients | browsing {enabled | disabled}

| writeable {enabled | disabled} | users | comment }Create a new share

cifs share destroy Destroy a sharecifs share disable Disable a sharecifs share enable Enable a sharecifs share modify {max-connections



sysadmin@dd-cablevision# cifs sharemtreeInvalid command "mtree", showing help:

Commands matching "mtree":mtree create Create a MTreemtree delete Delete a MTreemtree list [] List the MTreesmtree rename

Rename a Mtreemtree retention-lock disable mtree


24/30

Disables retention-lock for specifiedMTree.

mtree retention-lock enable mtree Enables retention-lock for specifiedMTree.

mtree retention-lock reset{min-retention-period | max-retention-period}mtree

Reset retention periods to default forspecified MTree.

mtree retention-lock revert Reverts retention-lock for specifiedpath.

mtree retention-lock set{min-retention-period | max-retention-period} mtree

Set retention periods for specifiedMTree.

mtree retention-lock show{min-retention-period | max-retention-period}mtree

Show retention periods for specifiedMTree.

mtree retention-lock status mtree Show retention-lock status for

specified MTree.mtree show compression [tier {active | archive}][summary | daily | daily-detailed]{[last { hours | days | weeks | months } |[start [end ]]}

Show mtree compression statisticsmtree undelete Undelete a Mtree

sysadmin@dd-cablevision# mtree create /backup

**** Invalid MTree path "/backup": MTree path has to start with /data/col1/ followed by MTree-name

sysadmin@dd-cablevision# mtree create /data/col1/ciimeMTree "/data/col1/ciime" created successfully.sysadmin@dd-cablevision#sysadmin@dd-cablevision# cifs share create ciime path /data/col1/ciime browsingenabled writeable enabled

**** "ciime" share name already exists.

sysadmin@dd-cablevision# share cifscifs share disable ciimeShare "ciime" has been disabled.sysadmin@dd-cablevision# cifs shraeare destroy ciimeAre you sure you want to destroy "ciime" share?


ok, proceeding.

Share "ciime" has been deleted.sysadmin@dd-cablevision# cifs shraare create cciime parth /data/col1/ciime browsingenabled writeable enabledShare "ciime" has been created.sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision# df


25/30

Active Tier:Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB---------------- -------- -------- --------- ---- -------------/data: pre-comp - 0.0 - - -/data: post-comp 65876.5 0.1 65876.4 0% 0.0/ddvar 132.9 1.3 124.9 1% ----------------- -------- -------- --------- ---- -------------sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision# cd /dataThat doesn't look like a valid command, displaying help...


adminaccess disk ntpalerts enclosure replicationalias filesys routearchive ipmi snapshotauthentication license snmpautosupport log storagecifs mtree supportcluster ndmpd systemconfig net user

ddboost nfs vtl



sysadmin@dd-cablevision# cd /data/col1That doesn't look like a valid command, displaying help...


adminaccess disk ntp

alerts enclosure replicationalias filesys routearchive ipmi snapshotauthentication license snmpautosupport log storagecifs mtree supportcluster ndmpd systemconfig net userddboost nfs vtl


Type "help " to search the commands for a specific keyword.

For example, "help timezone" shows all commands relating to timezones.

sysadmin@dd-cablevision# df

Active Tier:Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB---------------- -------- -------- --------- ---- -------------/data: pre-comp - 0.0 - - -/data: post-comp 65876.5 0.1 65876.4 0% 0.0/ddvar 132.9 1.3 124.9 1% -


26/30

---------------- -------- -------- --------- ---- -------------sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision# df

Active Tier:Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB---------------- -------- -------- --------- ---- -------------/data: pre-comp - 0.0 - - -/data: post-comp 65876.5 0.1 65876.4 0% 0.0/ddvar 132.9 1.3 124.9 1% ----------------- -------- -------- --------- ---- -------------sysadmin@dd-cablevision# cifs share showShares information for: all shares

--------------- share backup ---------------clients: 10.10.10.10enabled: yespath: /backup

--------------- share ciime ---------------browsing: yesclients: 10.10.10.10enabled: yes

maxconn: 0path: /data/col1/ciimewriteable: yessysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision# cifsaInvalid command "cifs", showing help:

Commands matching "cifs":

cifs add /backup Add a CIFS backup clientcifs add /ddvar Add a CIFS administrative clientcifs del /backup Delete a CIFS clientcifs del /ddvar Delete a CIFS clientcifs disable Disable CIFS clients from connectingcifs enable Enable CIFS clients to connectcifs hosts add

Add a lmhosts mappingcifs hosts del Remove a lmhosts mappingcifs hosts reset Reset (to default) the lmhosts mappingscifs hosts show Show lmhosts mappingscifs nb-lookup Resolve a NetBIOS name to IP addresscifs option reset Reset (to default) a CIFS option

cifs option set Set a CIFS optioncifs option show Show CIFS optionscifs reset authentication Reset (to default) CIFS authenticationcifs reset clients Reset (to default) the CIFS client listcifs reset nb-hostname Reset (to default) the NetBIOS hostnamecifs reset wins-server Reset (to default) the WINS Servercifs set authentication active-directory { [ [ ...]] | * }

Set mode to Active Directorycifs set authentication nt4 { [ []] | * }


27/30

Set mode to NT4 domaincifs set authentication workgroup

Set mode to workgroupcifs set nb-hostname Set the NetBIOS hostnamecifs set wins-server Set the WINS Server IPcifs share create path {max-connections




Modify a sharecifs share show [] Show shares configurationcifs show active Show the active CIFS clientscifs show clients Show all allowed CIFS clientscifs show config Show the CIFS configurationcifs show detailed-stats Show detailed CIFS statisticscifs show stats Show CIFS statistics

cifs status Show whether or not CIFS is enabledcifs troubleshooting domaininfo Show domain infocifs troubleshooting group | |

List one CIFS groupcifs troubleshooting list-groups List all CIFS groupscifs troubleshooting list-users List all CIFS userscifs troubleshooting performance Collect traces for CIFS performance

analysiscifs troubleshooting user | |

List one CIFS user

sysadmin@dd-cablevision# cifs share disabled


Incomplete syntax "cifs share disable", showing help:cifs share disable Disable a share

sysadmin@dd-cablevision# cifs share disable ciimeShare "ciime" has been disabled.sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#

sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision# cifs shreare destroy ciimeAre you sure you want to destroy "ciime" share?


ok, proceeding.

Share "ciime" has been deleted.


28/30

sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision# cifs share destroy backupAre you sure you want to destroy "backup" share?


ok, proceeding.

Share "backup" has been deleted.sysadmin@dd-cablevision# cifs hsashareInvalid command "cifs share", showing help:




| clients | browsing {enabled | disabled}| writeable {enabled | disabled} | users

| comment } Modify a sharecifs share show [] Show shares configuration

sysadmin@dd-cablevision# cifs share create ciime path /data/col1/ciime clients 10.10.10.10 browsing enabled writeable enabledShare "ciime" has been created.sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision# nfsInvalid command "nfs", showing help:

Commands matching "nfs":

nfs add [ ( ) ]Add NFS clients to an exportnfs del Delete NFS clients from an exportnfs disable Disable NFS clients from connectingnfs enable Enable NFS clients to connectnfs reset clients Reset (to default) the NFS client listnfs reset stats Clear NFS statisticsnfs show active Show active NFS clientsnfs show clients Show all allowed NFS clientsnfs show detailed-stats Show detailed NFS statisticsnfs show histogram [] Show an NFS histogramnfs show stats Show NFS statisticsnfs status Show whether or not NFS is enabled

sysadmin@dd-cablevision# nfs show clientNo NFS clients found.sysadmin@dd-cablevision# nfs add /data/col1/nfs 10.10.10.10** Directory "/data/col1/nfs" does not exist.NFS export for "/data/col1/nfs" added.sysadmin@dd-cablevision# nfs show activepath client----- ---------------------/data localhost.localdomain


29/30

----- ---------------------sysadmin@dd-cablevision# nfs show clientspath client options-------------- ----------- ----------------------------------------/data/col1/nfs 10.10.10.10 (rw,no_root_squash,no_all_squash,secure)-------------- ----------- ----------------------------------------sysadmin@dd-cablevision# nfs status

The NFS system is currently active and running.

Total number of NFS requests handled = 104.sysadmin@dd-cablevision# nfs reset clientssysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision#sysadmin@dd-cablevision# nfs show activepath client----- ---------------------/data localhost.localdomain----- ---------------------sysadmin@dd-cablevision# nfs enableNFS server is already enabled.sysadmin@dd-cablevision# nfs show clientsNo NFS clients found.

sysadmin@dd-cablevision# nfs add /data/col1/nfs 10.10.10.10** Directory "/data/col1/nfs" does not exist.NFS export for "/data/col1/nfs" added.sysadmin@dd-cablevision# df

Active Tier:Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB---------------- -------- -------- --------- ---- -------------/data: pre-comp - 0.0 - - -/data: post-comp 65876.5 0.1 65876.4 0% 0.0/ddvar 132.9 1.3 124.9 1% ----------------- -------- -------- --------- ---- -------------sysadmin@dd-cablevision#

sysadmin@dd-cablevision# dfnfs add /data/col1/nfs 10.10.10.10show clientsenableshow activereset clientsstatushow clientsactiveadd /data/col1/nfs 10.10.10.10show clientcifs share create ciime path /data/col1/ciime clients 10.10.10.10 browsing enabled writeable enabled destroy backupciimeisable share showdfcd /data/col1dfcifs share create ciime path /data/col1/ciime browsing enabled writeable enableddestroyciimeisablecreate ciime path /data/col1/ciime browsing enabled writeable enabledmtree create /data/col1/ciimebackup create /backupdata/col1/ciimecifs share create ciime path /data/col1/ciime browsing enabled writeable enableddisable ciimeestroycreate ciime path /data/col1/ciime browsing enabled writeable enableddfcd /data/col1dfcifs share show share disable ciimeestroybackup create ciime path /data/col1/ciime clients 10.10.10.10 browsing enabled writeable enablednfs show clientadd /data/col1/nfs 10.10.10.10show activeclientstatusreset clientsshow activeenableshow clientsadd /data/col1/nfs 10.10.10.10dfmtree

Invalid command "mtree", showing help:

Commands matching "mtree":mtree create Create a MTreemtree delete Delete a MTreemtree list [] List the MTreesmtree rename

Rename a Mtreemtree retention-lock disable mtree

Disables retention-lock for specified


30/30

MTree.mtree retention-lock enable mtree

Enables retention-lock for specifiedMTree.

mtree retention-lock reset{min-retention-period | max-retention-period}mtree

Reset retention periods to default forspecified MTree.

mtree retention-lock revert Reverts retention-lock for specifiedpath.

mtree retention-lock set{min-retention-period | max-retention-period} mtree

Set retention periods for specifiedMTree.

mtree retention-lock show{min-retention-period | max-retention-period}mtree

Show retention periods for specifiedMTree.

mtree retention-lock status mtree Show retention-lock status forspecified MTree.

mtree show compression [tier {active | archive}][summary | daily | daily-detailed]{[last { hours | days | weeks | months } |[start [end ]]}

Show mtree compression statisticsmtree undelete Undelete a Mtree

sysadmin@dd-cablevision# mtree create /data/col1mtreedfnfs add /data/col1/nfs 10.10.10.10show clientsenableshow activereset clientsstatushow clientsactiveadd /data/col1/nfs 10.10.10.10show clientcifs share create ciime path /data/col1/ciime clients 10.10.10.10 browsingenabled writeable enabled destroy backupciimeisable share showdfcd /data/col1dfcifsshare create ciime path /data/col1/ciime browsing enabled writeable enableddestroy ciimeisablecreate ciime path /data/col1/ciime browsing enabled writeable enab

ledmtree create /data/col1/ciimebackup create /backupdata/col1/ciimecifs share create ciime path /data/col1/ciime browsing enabled writeable enableddisable ciimeestroycreate ciime path /data/col1/ciime browsing enabled writeable enableddfcd /data/col1dfcifs share show share disable ciimeestroybackup create ciime path /data/col1/ciime clients 10.10.10.10 browsing enabled writeable enablednfs show clientadd /data/col1/nfs 10.10.10.10show activeclientstatusreset clientsshow activeenableshow clientsadd /data/col1/nfs 10.10.10.10dfmtreesysadmin@dd-cablevision# mtreee create /data/col1/nfsMTree "/data/col1/nfs" created successfully.sysadmin@dd-cablevision# df

Active Tier:Resource Size GiB Used GiB Avail GiB Use% Cleanable GiB

---------------- -------- -------- --------- ---- -------------/data: pre-comp - 0.0 - - -/data: post-comp 65876.5 0.1 65876.4 0% 0.0/ddvar 132.9 1.3 124.9 1% ----------------- -------- -------- --------- ---- -------------sysadmin@dd-cablevision# exitexitConnection to 10.10.10.1 closed.bash-3.2# Fbash-3.2#Script done on Wed Mar 7 11:08:57 2012

Documents

DD-Commands.rtf