Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
ENGINE
Model Case Family IV 667TA/EED(LT and XLT), Tier III certified
Case Family IV 667TA/EBF(LGP), Tier III certified
Cylinders 6
Bore/Stroke 4.1 in x 5.2 in(104 x 132 mm)
Displacement 409 in3 (6.7 L)
Fuel injection Direct
Fuel Diesel
Fuel filter spin-on with in-line strainer
Air intake Cross-flow
Cooling Liquid
Engine speeds (rpm)
High idle - no load 2100±70
Rated - full load 2000
Low idle 780/920
Horsepower per SAE J1349LT, XLT
Net 184 (137 kW) @ 2000 rpm
Gross 194 (145 kW) @ 2000 rpm
Peak torque @ 1400 rpm
Net 634 lb·ft (860 N·m)
LGP
Net 199 (148 kW) @ 2000 rpm
Gross 210 (157 kW) @ 2000 rpm
Peak torque @ 1400 rpm
Net 702 lb·ft (952 N·m)
Engine lubrication –
Pump Deep sump plate cooler
with pressurized
under-piston nozzles
Pump operating angle ratings
Side-to-side 45°
Fore and aft 45°
Oil filtration Replaceable, spin-on full-flow cartridge
ENGINE COOLING
Radiator –
Core size area 1193 in2 (0.77 m2)
Rows of tubes 6
Fan –
Diameter 30 in. (762 mm)
Ratio 1.1:1
ELECTRICAL SYSTEM
System voltage 24
Alternator 65 amp
Batteries (2)
12-volt, low-maintenance, 650 cold-crankingamps @ 0° F (-18° C)
POWERTRAIN
Torque converter Single-stage
Diameter 15 in (381 mm)
Stall ratio 2.28
Drawbar pull* –
1st 65,200 lb (290 kN)
2nd 37,000 lb (165 kN)
3rd 21,000 lb (93 kN)
Tranmission Countershaft modulated full powershift
Steering Hydrostatic differential steering
Oil filter 25 micron absolute, spin-on replaceable
Travel speeds* –
Forward mph (km/h)
1st 2.7 (4.3)
2nd 4.1 (6.7)
3rd 6.8 (10.9)
Reverse
1st 3.2 (5.2)
2nd 5.2 (8.4)
3rd 8.1 (13.0)
Parking brakes
Heavy-duty, spring-applied, hydraulicpressure release
Brakes
Multi-disc, spring-applied, hydraulic pressurerelease, oil cooled; applied by depressingcenter floor brake pedal
Final drive Double reduction
* LT and XLT configuration
HYDRAULIC SYSTEM
Equipment and steering pump variable
piston pump – load sensing
Max. pump flow 65.8 gpm (249 L/min) @ 2000 rpm
CYLINDERS
Lift cylinders (2)
Bore diameter 3.74 in (95 mm)
Rod diameter 2.36 in (60 mm)
Stroke 49.2 in (1250 mm)
Tilt cylinder (1)
Bore diameter 5.51 in (140 mm)
Rod diameter 2.76 in (70 mm)
Stroke 4.96 in (126 mm)
UNDERCARRIAGE
Track adjustment Hydraulic
Frame Oscillating suspension
Length of track on ground
XLT, LGP 126 in (3200 mm)
LT 106.3 in (2700 mm)
Track link pitch 8 in (203 mm)
Track shoe height 2.8 in (71.5 mm)
Track shoes per side –
LT 40
XLT & LGP 45
Track rollers per side –
LT 7
XLT & LGP 8
Carrier rollers per side 2
TRACK
LONG TRACK
22 in (559 mm) closed grousers and CLT
24 in (610 mm) closed grousers and CLT
EXTRA LONG TRACK
22 in (559 mm) closed grousers and CLT
24 in (610 mm) closed grousers and CLT
LGP
30 in (762 mm) closed grousers and CLT
36 in (915 mm) closed grousers and CLT
1850K
Page 1 of 4
SERIES 3 LT/XLT/LGP CRAWLER DOZERTIER III CERTIFIED
OPERATOR ENVIRONMENT
ROPS canopy
Joystick lever with forward/reverse detentsand up/down shift button
Adjustable armrest
Foot rests
Retractable seat belt, 3 in (76 mm)
Vinyl suspension seat w/ fore/aft and heightadjustment
Center brake pedal
INSTRUMENTATION
Warning lights:
Engine coolant
Air filter
Battery
Brakes
Engine oil pressure
Low fuel level
Hydraulic filter
Transmission pressure
Transmission temperature
Indicator lights (green):
Front work lights on
Rear work lights on
Display lights on
Gauges:
Fuel level
Tachometer
Water temperature
Audible warnings:
Engine oil pressure
Transmission pressure
Engine coolant
Transmission temperature
Brakes
Digital display (5 digits):
Displays engine hours upon start up and thengear selected
BLADE
Blade cutting edge 55°
Lift speed
(per second) 8.3 in (212 mm)
Cutting edge Reversibleand replaceable
Width 8.0 in (203 mm)
Thickness 0.75 in (19 mm)
RIPPER
Max. penetration 21 in (540 mm)
Width 83.9 in (2130 mm)
Cut width 74.8 in (1900 mm)
Ground clearance (at carry) 19.8 in(503 mm)
Points Replaceable
Number of shanks 3
Tooth spacing 36.3 in (922 mm)
Hydraulic cylinder (2-double-acting)
Diameter 3.94 in (100 mm)
Stroke 18.9 in (480 mm)
Rod 2.20 in (56 mm)
Weight 4,431 lbs (2010 kg)
SERVICE CAPACITIES
Fuel tank 106 gal (401.2 L)
Engine oil w/filter 20 qt (19 L)
Engine oil w/o filter 16.8 qt (16 L)
Engine cooling system 26.4 qt (25 L)
Hydraulic reservoir 122.6 qt (118 L)
Final drive (per side) 34.9 qt (33 L)
OPERATING WEIGHTS
Unit equipped with ROPS, full fuel tank, 175 lb(79 kg) operator, semi U blade and 22 in(560 mm) grousers
Long Track 44,269 lbs (20 080 kg)
Extra Long Track 46,649 lbs (21 159 kg)
LGP* 49,450 lbs (22 430 kg)
Add-on weights —
Ripper 4,431 lbs (2010 kg)
Cab 661 lbs (300 kg)
24 in grousers on LT 330 lbs (150 kg)
24 in grousers on XLT 375 lbs (170 kg)
* Unit equipped with ROPS, full fuel tank, straightblade and 36 inch grousers.
1850K Page 2 of 4
A
BE
G
H
I
1850K Page 3 of 4
CD
J
DIMENSIONSLong Track (LT) Extra Long Track (XLT) Low Ground Pressure (LGP)
BLADE Semi U Semi U Straight PTA. Blade lift above ground 43 in (1100 mm) 46 in (1160 mm) 46 in (1160 mm)B. Blade depth below ground 18.5 in (472 mm) 21 in (534 mm) 21 in (534 mm)C. Blade tilt, each end 33 in (838 mm) 33 in (838 mm) 33 in (838 mm)D. Blade height 56 in (1425 mm) 56 in (1425 mm) 43.7 in (1110 mm)
Blade capacity 7.3 yd3 (5.6 m3) 7.3 yd3 (5.6 m3) 4.8 yd3 (3.7 m3)
TRACKSTrack gauge 75 in (1905 mm) 75 in (1905 mm) 82 in (2082 mm)Max. shoe width 24 in (609 mm) 24 in (609 mm) 36 in (914 mm)
E. Length of track on ground 106.3 in (2700 mm) 126 in (3200 mm) 126 in (3200 mm)Ground pressure 8.6 psi (60.3 kpa) 7.5 psi (52.8 kpa) 5.4 psi (37.6 kpa)
DIMENSIONSG. Height to top of ROPS 127 in (3226 mm) 127 in (3226 mm) 127 in (3226 mm)H. Height to top of exhaust 125 in (3175 mm) 125 in (3175 mm) 125 in (3175 mm)
Ground clearance w/drawbar 15 in (381 mm) 15 in (381 mm) 15 in (381 mm)I. Length – blade straight
with drawbar 216 in (5487 mm) 223 in (5675 mm) 223 in (5675 mm)with ripper 253 in (6420 mm) 262 in (6655 mm) 262 in (6655 mm)
J. Width –with blade straight 134.6 in (3420 mm) 134.6 in (3420 mm) 154 in (3900 mm)over track 98.8 in (2510 mm) 98.8 in (2510 mm) 118 in (2997 mm)
DIMENSIONS – PAT BLADELong Track (LT) Extra Long Track (XLT) Low Ground Pressure (LGP)
BLADE PAT PAT PATA. Blade lift above ground 45.2 in (1148 mm) 51.2 in (1300 mm) 49.6 in (1260 mm)B. Blade depth below ground 30.1 in (764 mm) 31.5 in (800 mm) 31.5 in (800 mm)C. Blade tilt, each end 18.9 in (480 mm) 18.9 in (480 mm) 22.4 in (569 mm)D. Blade height 52.1 in (1323 mm) 52.1 in (1323 mm) 52.1 in (1323 mm)
Blade capacity 6.3 yd3 (4.8 m3) 6.3 yd3 (4.8 m3) 7.1 yd3 (5.4 m3)
TRACKSTrack gauge 75 in (1905 mm) 75 in (1905 mm) 75 in (1905 mm)Max. shoe width 24 in (609 mm) 24 in (609 mm) 36 in (914 mm)
E. Length of track on ground 106.2 in (2697 mm) 126.2 in (3205 mm) 126.2 in (3205 mm)Ground pressure 8.8 psi (60.7 kpa) 7.9 psi (54.2 kpa) 6.6 psi (45.2 kpa)
DIMENSIONSG. Height to top of ROPS 127 in (3226 mm) 127 in (3226 mm) 127 in (3226 mm)H. Height to top of exhaust 125 in (3175 mm) 125 in (3175 mm) 125 in (3175 mm)
Ground clearance w/drawbar 15 in (381 mm) 15 in (381 mm) 15 in (381 mm)I. Length – blade straight
with drawbar 221 in (5613 mm) 233 in (5918 mm) 233 in (5918 mm)with ripper 258 in (6553 mm) 270 in (6858 mm) 270 in (6858 mm)
J. Width –with blade straight 142 in (3607 mm) 142 in (3607 mm) 160 in (4064 mm)over track 98.8 in (2510 mm) 98.8 in (2510 mm) 118 in (2997 mm)
Form No. CCE11220601R Printed in U.S.A. © 2007 CNH America LLC Replaces form no. CCE11220601 1850K Page 4 of 4 All Rights Reserved
NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices, where applicable.NOTE: All engines meet current EPA emissions requirements.IMPORTANT: CNH America LLC reserves the right to change these specifications without notice andwithout incurring any obligation relating to such change. CNH America LLC does not warrant thesafety or reliability of attachments from other manufacturers.Case is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goodsand/or services of companies other than CNH America LLC, are the property of those respective companies.
www.casece.com
STANDARD EQUIPMENT
OPERATOR’S COMPARTMENT
ROPS/FOPS canopy
ROPS headliner
Vinyl suspension seat w/fore/aft and heightadjustment
Retractable seatbelt, 3 in (76 mm)
Adjustable armrests
Foot rests
ENGINE
Case Family IV 667TA 6.7L
Tier III certified
Decelerator
Automatic fan belt tensioner
Integral engine oil cooling
Fuel filter
Dual element radial seal air cleaner
70 amp alternator
12-volt battery
Anti-sandblast screens (2) for radiator
Side-by-side radiator/transmission coolers
Engine side panels
POWERTRAIN
3F/3R modulated Powershift transmission
“Power steer” steering
Joystick control with F/R detents and up/downshift button
“AS” auto shift feature allows auto shift from1F gear to 2R gear
“AL” auto load shifts down under load
BLADE
Single lever control for blade functions
Pilot-operated control
For optional PAT configurationSingle lever control with hoist function
UNDERCARRIAGE
Hydraulic track adjusters
Case lubricated track chain
Permanently lubricated track and carrier rollers
Track adjuster guard
Track guides (front and rear)
OTHER
Backup alarm
Horn
Anti-vandalism package
Mirror
Pre-cleaner, turbo
Lights – 2 front, 2 rear
Bottom transmission guard
Bottom engine guard
Winch drive
OPTIONAL EQUIPMENT
OPERATOR’S COMPARTMENT
Cab (w/heater, air conditioner, defroster, front &rear windshield washer/wiper, lights, clothsuspension seat, cigarette lighter and ashtray)
Air suspension seat
HYDRAULICS
Rear hydraulic function for field-installed ripper
REAR MOUNTED EQUIPMENT
Ripper (3 shanks)
Retrieval hitch
Drawbar
BLADES
142.5 in (3620 mm) Semi-U
154 in (3900 mm) Straight PT
142 in (3607 mm) PAT
160 in (4064 mm) PAT
GUARDS
Sweeps
Center rockguard
SCREENS
Rear ROPS and cab
Forestry package (includes sweeps, rearscreen, side screens, door screens, front screenand radiator screen)
OTHER
Cold start aid
Radio (cab only)
KK SERIES CRAWLER DOZERS1650K 1850K
K Series DozersCUSTOMER SUPPORT
2
The Case dealer: Your professional partner
Start with world-class Casemachinery and attachmentsYour Case dealer will help youwork smarter and faster by select-ing equipment that delivers quality,performance and operator comfort.Your dealer has the knowledge andexperience necessary to guide youin choosing the right attachmentsso you can…• Work faster with less wear on your
equipment• Reduce the number of machines
you need• Increase your capabilities
Let your Case dealer service yourmachine on the jobsiteYou’ll be back in the dirt fasterwhen your Case dealer servicesyour equipment on the jobsite.Advantages include…• Saving time and the cost of
transporting machines to and fromyour dealer
• Reducing costs due to downtime• Reducing service staff and stocking
fewer parts
Manage your equipment betterThe Case Care PlusPac™ is a pre-paid maintenance plan designedespecially for your machine.
Factory-trained Case techniciansperform routine inspections andregular service to detect problemsbefore they start. Other plans,such as the Machine ProtectionPlusPac, can be purchased toextend protection beyond the basewarranty. Add the GlobalTRACS®
Fleet Management CommunicationsSystem to complete your program.GlobalTRACS gives you the infor-mation to manage your fleet betterwhile protecting it against theft.Ask your local Case dealer aboutadding value and peace of mindto your machine with thesehelpful programs.
Power behind the pushFor the really big jobs, you need acrawler dozer with the fortitude to pushdirt, mud, or whatever Mother Naturedeals on a given day. While the power-train provides the driving force behindany crawler dozer, you need a heavy-duty engine to power it. The 1650K and1850K get their power from high torque,long lasting, 6-cylinder diesel enginesthat maximize productivity. These ruggedengines are extremely durable andfeature outstanding fuel economy.
With a 5.9-liter engine in the 1650K andan 6.7-liter engine powering the 1850K,these dozers keep pushing on, hour afterproductive hour.
Premium push powerSmart engineering makes the most ofpower and speed—the torque converterautomatically matches speed to loadconditions for optimal push power whilepreventing driveline shock, protectingyour investment. Torque multiplicationdelivers maximum drawbar pull—onthe 1850K, that’s 65,200 lbs. (290.0 kN)in first gear.
Three-speed PowershiftTransmission smoothes the rideThe Case three-speed PowershiftTransmission provides outstandingdurability and performance, withelectronically controlled, smoothlymodulated shifts. The PowershiftTransmission features two specialmodes, Auto Shift and Auto Load.
In the Auto Shift Mode, the unit shiftsfrom 1st forward to 2nd reverse, andback to 1st forward for faster, easier, andmore efficient operation. This is reallyhandy when you’re doing precisiongrading work.
In the Auto Load Mode, thetransmission downshiftsautomatically whenengine RPM drops belowthe preset speed, allow-ing you to concentrateon the job. Auto Loadis designed for highspeed bearing loadssuch as light grading.
Doze where you want to…PowerSteer moves you in the rightdirection, wherever it isThe exclusive Case hydraulic variablePower Steer feature delivers maximumpower to both tracks. This feature letsyou push a full load of material througha turn with no problem. A single, easy-to-use lever controls both directionand steering. The drivetrain deliversoutstanding power to each track throughbeefy double-reduction final drives.
There’s absolutely no need to brake orlift the blade to lighten the load whenturning—no wonder we call it “PowerSteer.” This means you’ll make fewerpasses to move material for greaterproductivity. You’ll find these dozersare much more productive thancompetitive machines using clutchand brake steer systems. And thePower Steer feature makes the dozereasy to run, improving productivity,reducing operator fatigue, and loweringoperating cost per cubic yard.
Maximum maneuverabilityCounter-rotation gives you maximummaneuverability. One track movesforward, one track reverses, and thedozer rotates in place. The 1650K and
1850K can turn withintheir own length.It doesn't get anybetter than that.
3
The Heavyweights of the Case K Series… the 1650K and 1850K Crawler Dozers
K Series Dozers
4
Long Track, Wide Track, and Low Ground Pressure VersionsThe 1650K and 1850K are available in a wide variety of undercarriage andblade versions to match application requirements. Correctly matching themachine configuration to the application results in maximum productivityand efficiency, improving your bottom line.
The Long Track (LT) is perfect for rough grading and stumping. Select theExtra Long Track (XLT) version for precision grading and increased flotation.The Wide Track (WT) version provides extra stability and accommodateswider blades for finish grading or slope work. For applications requiringlower ground pressure, the LGP Track version maximizes flotation whileproviding superb blade coverage. Ask your Case dealer to help youdetermine the best track/blade combination for your application.
Blade visibilityVisibility to the blade is important for precision work –even with machines as productive as these. The narrowdash and tapered engine compartment on these dozerspermit the operator to see the cutting edge of the bladeand monitor material flow off the blade.
Equalizer Beam SuspensionThe Case 1650K and 1850K Dozers feature anoscillating undercarriage, which means the tracksfollow the terrain, no matter what the conditions, foroutstanding traction, stability and blade control. Theoscillating undercarriage makes these dozers highlyproductive in all kinds of applications, generatinggreater revenue for your business.
POWER AND VERSATILITY
5
Iso-Mounted Cab/ROPSThe operator platform is isolation mounted from themain frame to cushion your body from the effects ofnoise and vibration, providing a comfortable ride,reducing fatigue, and increasing your productivity levels.
Power Angle Tilt OptionThe Power Angle Tilt (PAT) blade is standard onthe 1650K and is available as an option on the1850K. The PAT blade provides the flexibility thattoday’s job sites require. It is ideally suited tobackfilling, finish and rough grading, mediumdozing, windrowing, V-ditching, and side-slopeoperation. Simply put, the PAT blade makes aCase 1650K or 1850K Dozer more versatile.
Tapered Track CoversSmooth tapered track covers are just one of thestandard features included on the Case 1650K and1850K Dozers to help ensure long life and minimizeowning and operating costs. Track covers contributeto longer undercarriage life by minimizing packingand resultant undercarriage component abrasion.
K Series DozersOPERATOR ENVIRONMENT
6
In this cab, you’ll hardly know you’re outdoors
Please see your Case dealer for specialapplication needs.
To add versatility to your Case Crawler Dozer, equip itwith attachments and special packages designed foryour application. These include:
The luxurious cab available on the 1650Kand 1850K gives an exceptional view tothe blade and provides a comfortableworking space you’ll tailor to fit yourneeds. The heating, ventilation, andcooling system keeps the environmentjust right—no matter what the weatherconditions. All cabs are equipped with amechanical suspension seat, adjustablearmrests, feature low dB(A), and areradio-ready. Add in the optional, air-suspension, 15-degree swivel seat,and you’ll feel like you’re not evenworking outdoors.
Intuitive controlsErgonomically designed controls helpkeep you relaxed yet focused on thejob. The intuitive, single-lever steering/directional control and the hydrauliccontrol make operation of these dozersa breeze. If you’re a novice operator,you’ll be up to speed quickly. If you’rehighly experienced, you’ll be moreproductive than ever.
VisibilityExpansive, tinted glass provides 360-degree visual command of the entire jobsite. All-around visibility is outstanding.The tinted glass helps reduce eye strainfrom long days in the sun, reducingfatigue and increasing productivity.
ATTACHMENTS
DrawbarFairlead/ArchesForestryGuarding
RippersRoot RakesSpecialty BladesWinches
SERVICEABILITY
7
Lightning-fast serviceability keeps the1650K and 1850K Dozers running atpeak performance — when they aremost profitable. Easy access tocomponents also reduces owning andoperating costs.
Swing-out side shields, grille and bellypans provide quick access to grouped,spin-on filters and make clean-out easy.
Tilt cab provides easy accessShould your 1650K or 1850K needrepair, the operator platform can betilted in less than 10 minutes toprovide convenient access to thedrivetrain and hydraulic componentsfor minimized downtime.
A lift-out radiator sand screen, auto belttensioner, sight gauges for coolant andthe hydraulic system, remote drain linesfor fluids, and easy-access diagnostictest ports make the 1650K and 1850Kdozers as easy to care for as they are tooperate. Contact your Case dealer for ademonstration today.
Designed with easy access in mind
K
Bodycopy.Copygoeshere.Copygoeshere.Copygoeshere.Copy goeshere. Copygoes here.Copygoeshere.Copygoes
here. Copy goes here. Copy goeshere. Copy goes here. Copy goeshere. Copy goes here. Copy goeshere.
1650K/1850K CRAWLER DOZER
QUICK SPECS
www.casece.com
NOTE: All engines meet current EPA emission regulations.
NOTE: All specifications are stated in accordance with SAE Standards orRecommended Practices, where applicable.
IMPORTANT: CNH America LLC reserves the right to change these specificationswithout notice and without incurring any obligation relating to such change.Availability of some models and equipment builds vary according to the countryin which the equipment is used. The illustrations and text may include optionalequipment and accessories and may not include all standard equipment. YourCase dealer/distributor will be able to give you details of the products and theirspecifications available in your area.
Always read the Operator’s Manual beforeoperating any equipment. Inspect equipmentbefore using it, and be sure it is operatingproperly. Follow the product safety signs anduse any safety features provided.
© 2006 CNH America LLC. Case is a registered trademark of CNH America LLC.Any trademarks referred to herein, in association with goods and/or services ofcompanies other than CNH America LLC, are the property of those respectivecompanies. All rights reserved. Printed in U.S.A.
Form No. CCE1170601 Replaces Form No. CCE7150503
LT 1650K 1850K
Engine — 184 net hp (137 kW)
Operating weight — 44,269 lb (20 080 kg)
Blade capacity — 7.3 cu yd (5.6 cu m)
Track on ground — 106.3 in (2.7 m)
XLT 1650K 1850K
Engine 140 net hp (104 kW) 184 net hp (137 kW)
Operating weight 33,780 lb (15 355 kg) 46,649 lb (21 159 kg)
Blade capacity 4.12 cu yd (3.15 cu m) 7.3 cu yd (5.6 cu m)
Track on ground 118 in (2.99 m) 126 in (3.2 m)
LGP 1650K 1850K
Engine 140 net hp (104 kW) 199 net hp (148 kW)
Operating weight 35,700 lb (16 230 kg) 49,450 lb (22 430 kg)
Blade capacity 4.3 cu yd (3.3 cu m) 4.8 cu yd (3.7 cu m)
Track on ground 118 in (2.99 m) 126 in (3.2 m)