Embed Size (px)
Citation preview
FixingFixing is by the specialpolypropylene Plaster-Lathplug at 250mm centres.An area 100mm free ofmesh on the Plaster-Lathallows firm and positiveoverlap jointing.
Dry liningDry lining can be fixed toPlaster-Lath by applyingadhesive plaster dabsdirectly onto Plaster-Lathfixings. (See manufacturer’sinstructions for full guide).
VentilationThe air gap can be vented externally via an air vent or internallyusing the PT-profile stripsat the top and bottom ofthe system.
RenderingPlaster-Lath will accepttraditional renders andplaster. All applications are applied in two coats.(See fixing instructions for full guide).
The original damp-proofing membrane system
PLASTER-LATH Easy-to-useDamp-proof system for walls
Damp-proof system for wallsProvides key for plaster, render or dab fixFast-track applicationControls damp; salts & contaminated surfacesAir gap improves insulationEasy to use, easy to handle, just drill & fix
DELTA
BasementINFORMATION CENTRE
UniclassL6813
CI/SfBLn6 (L34)
November 2011
®
DELTA MEMBRANE SYSTEMS LTD.
DELTA_PLASTER_LATH_A4 13/2/07 10:12 am Page 1
The original damp-proofing membrane system
The fast-track damp-proof system guaranteedfor 30 years
Technical DataSIZE supplied in rolls
1.5m x 10m (15m2)
WEIGHT 8.5kg per roll
DEPTH < 8mm
RESISTANCE TO 80kN/m2
COMPRESSION
TENSILE STRENGTH 600N/60mm
ELASTICITY 60% (approx)
TEMPERATURE Thermal resistance forRESISTANCE 105mm outer leaf at
2.7% v/V moisturecontent is:0.105 = 0.072mm2K/W1.485
STANDARD Plaster-Lath+U-VALUES plaster+105mm brick
wall 2.25W/m2K
Plaster-Lath+Plaster+220mm brickwall 1.72W/m2K
HEALTH & SAFETY No health hazard
Specification guide
JOINTING Plaster-Lath to belap jointed eitherhorizontally orvertically allowing100mm overlap.
FIXING At 250mm internallyand 150mmexternally (maximum)Vertical and horizontalcentres by Plaster-LathPlugs, followingmanufacturer’sinstructions.
PLASTERING* In accordance withBS5492
RENDERING* In accordance withBS5262
DECORATION Renderings to bethoroughly dry beforePainting or applicationof wallpapers etc.
* Refer to manufacturer’s instructionsfor specific plasters and renders.
Guarantee Plaster-Lath is guaranteed againstdeterioration for a period of 30 yearson condition that is has been fixed and finished in accordance with themanufacturer’s instructions. Delta MSLtd cannot be held responsible for theperformance of plasters, renders or other finishes.
c Copyright DMS Limited 2001 01/04/DMS
The ‘Original’ damp-proof plastic membrane systems which eliminates dampness, the effects of salts andcontaminated backgrounds.Guaranteed for 30 years.
The surface of the membrane has a meshed key permanentlymanufactured to it, whichprovides a key for render, plaster,or dab fixing plasterboard.
The dimpled design createsan air gap, which insulatesand allows for ventilation,and natural drying of the wall, while providing a drydecorative finish internally.
The air gap can be ventedexternally via an air vent orinternally using the PT-profilestrips at the top and bottomof the system.
Roll size:1.5 x 10 metre (15m2)
Available from:
DELTA Membrane Systems LtdDelta House, Merlin Way, North Weald, Epping, Essex CM16 6HRtel: 01992 523523 fax: 01992 523250email: [email protected] Website: www.deltamembranes.com
®PLASTER-LATH
DELTA_PLASTER_LATH_A4 13/2/07 10:12 am Page 2
