Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
• Highest wind resistance and waterproof.• Prevents rain damage.• Helps prevent mold, rot, and roof leaks.• Stronger and lighter than felt.• Adds value to your home.
DELTA®-ROOF Tough, Long-lasting Underlayment for Asphalt Shingle Roofs.
HIGH PERFORMANCE AIR & MOISTURE BARRIERS
AC188 ApprovedESR-2625
A reliable combination of materials that protect against rain, wind, dust and driven snow.
DELTA®-ROOF
■ Consists of four layers. A watertight layer between two spun-fibre fabrics and a reinforcement grid provides much improved wind resistance and longevity over asphalt saturated base sheets.
■ Is watertight and provides reliable protection against rain, wind, dust and driven snow.
■ Thanks to its special surface structure, is very abrasion-proof and non-slip, wet or dry.
■ Can be laid directly underneath all conventional roofing products.
■ Is pleasantly light in comparison to bitumen and asphalt saturated sheathing membranes.
■ Speeds up installation and reduces labor cost due to roll size and weight.
Technical Data Overview:
Material Spun-fibre material combined with a waterproof intermediate layer and reinforcement grid
Application On pitched roofs with rigid sheathing
ASTM E96 (Proc. B)Water Vapor Transmission Permeance Perms
0.415 (g/m2. 24h) 3.42 (ng/Pa/s/m2) 0.06 (grains/h/ft2/inHg)
ASTM D5035MD: Breaking Load MD: Elongation at break CD: Breaking LoadCD: Elongation at break
146.9 lb/2 in. (653.5 N/50 mm) 17.7 %137.6 lb/2 in. (611.8 N/50 mm) 18.3 %
ASTM D1922 - 03aMD: Tear resistanceCD: Tear resistance
2624 g 2975 g
ASTM D4533 - 2004MD: Tearing Strength CD: Tearing Strength
41.6 lb (185.2 N)36.1 lb (160.6 N)
ASTM D751 (sections 33-36)MD: Tearing Strength CD: Tearing Strength
N.M.127.9 N
AATCC Test Method 42-2000Resistance to water penetration
795.4 cm
CAN/CGSB-4.2 No 26.3 Water impact resistance
pass
ASTM D3462-03 section 8.1.11 Pull-Through Force
284.0 N
Service temperature range -40 °F to 176 °F (- 40 °C to + 80 °C)
Roll weight approx. 35 lbs (16 kg)
Roll size 164 ft x 4.92 ft (50 m x 1.5 m)8 squares
Due to variable weather and UV conditions, we recommendefficient covering of the roof underlayment.
DEL
TA®
is a
regi
ster
ed tr
adem
ark
of E
wal
d D
örke
n AG
, Her
deck
e, G
erm
any.
■ Visit us on:
LinkedIn Twitter YouTube
■ Laid directlyunderneath conventionalroofing products
■ Special surface structure. Abrasion-proof and non-slip, wet or dry
■ Reinforcement Grid
DELTA® quality branded products made by Dörken.
■ The information printed in this brochure reflects product infor-mation and specifications at the date of printing. The manufacturer reserves the right to make changes when necessary. All rights reserved. DELTA®-branded quality products manufactured by Dörken.
Dörken Systems Inc.
4655 Delta Way
Beamsville,
ON L0R 1B4, Canada
Tel.: +1 (905) 563 3255
Fax: +1 (905) 563 5582
www.dorken.com
A Dörken Group company