Demographic Update through Update Client Lite (UCL)...Operator Manual for the Enrolment Process – UCL @CSC CSC-SPV, 2016 Page 2 of 18 1. About Demographic Update and UCL (Update

Operator Manual for the Enrolment Process – UCL @CSC

CSC-SPV, 2016 Page 1 of 18

CSC e-Governance Services India Limited,Ministry of Communications & Information Technology,Electronics Niketan, 3rd Floor, DeitY, 6 CGO Complex,Lodhi Road, New Delhi – 110003Phone : - 011-24301349

Demographic Update through Update Client Lite (UCL)Document Version: 2.0/2016



1. About Demographic Update and UCL (Update Client Lite)

The residents who would have got enrolled with AADHAAR enrollment process may have some

information to be corrected either demographic or biometric. Demographic details likes:

Address

Name

Gender

Mobile number or Email

Age/DOB

PIN

It is equally important for the resident to update the central repository to avail the AADHAAR benefits.

Update process is required to enable the residents to request for the updates in the system.

The UCL allows to updates only on demographic details. For biometric details update, the resident

should visit an enrolment centre where Standard Update Client and necessary infrastructure is available.

The biometric data of user is expected to identify a user uniquely and is not changed naturally for a long

period of time, whereas the demographic details can change multiple times without any hard conditions, it

would be expected that residents will have to update their demographic data in the central repository

much frequently than the biometric data. This would require large scale deployment of update centers to

cater to the need of demographic updates. These updates are not as sensitive as the biometric updates

from security and identity perspective and hence certainly have different need from authentication

measures perspective. Even within demographic details, email address, mobile number and PIN are the

fields that do not need any verification or proof apart from resident authentication and hence can be

updated instantly in an online mode.

Update process using UCL allows the resident to update the demographic details if any after the resident

has been allotted an AADHAAR number. Update process accepts the details as requested by the

resident, authenticates the details with resident’s single fingerprint bio-metric and sends it to the server to

be updated in the central repository. Update process up-dates the details and generates a print receipt

bearing the changes which have been requested by the resident.



2. About UCL Application for CSCs

VLEs without enrollment machines can update resident’s “aadhaar demographic” details through

apna CSC portal. VLEs can avail service using single finger print authentication device authorized

by UIDAI i.e. Morpho

To avail the service all VLEs have to register themselves on “Aadhaar Demographic Registration”

link in “UID Services” list of apna CSC Portal and must be NSEiT/Sify Certified.



3. Pre-requisites for UCL

Laptop with Genuine Windows 32-Bit & USB hub , Minimum 2Ghz, core i3 Processor,3GB RAM, 160 GB HDD, Single Fingerprint Authentication Device(like Morpho), Digital Camera as per UIDAI’s specifications, Color Laser Printer, Internet connectivity, Scanner, Printed Correction Forms.

Check that your system has the above configuration

Download the correction form from UIDAI website

Note * (Windows Vista/any 64 bit Operating System is not supported)



4. UCL Installation Process:-

After the successful registration on Apna CSC portal, download UCL Software from the “Aadhaar Demographic Registration” Link.

Save the software in your system.



Run setup to install UCL on your system

Select the Finger print device.



Select the Device and click next till the installation is finished.

After successful registration VLEs have to coordinate with CSC representative or helpdesk to Register the Machine.



5. How to Use UCL with apna CSC Portal

5.1 Login in to the Aadhaar Enrolment Update Client

Aadhaar Enrolment Update Client Lite (UCL) has been registered and configured using Enrolment Client

Administrator. In order to start enrolling the residents and generate an Enrolment ID, Operator should

login to the UCL.

To begin doing this, first launch the UCL by clicking on the UCL from the start menu.

On launching the application, enter the user credentials and biometric (finger print) to login to the

enrolment client



Enter Aadhaar number to register.

Authentication through biometric.

5.2 Update Resident Information

* The first step in the process of updating a resident is to capture the resident’s demographic data in the

enrolment client.

(For a resident desiring to update his/her demographic details, it is mandatory to bring documents that

serve as Proof of Identity and Proof of Address or the resident should get introduced by an Introducer in

case if he/she does not have the relevant documents.)



Edit Icon displayed against each of the fields should be clicked.

Once demographic details are captured, click on the Next button to move to the Reference

screen.

For any correction in name and demographic details, resident should provide valid documents as proof of

identity (POI) and proof of address (POA). Based on the corrections made in each section identity proof

(POI) and address proof (POA) drop downs will get enabled. Operator needs to select the corresponding

document name from the dropdown menu, which is same as the document submitted by the resident for

verification purpose.



Click on confirm if details are correct.

This Confirm button will take you to the Biometric confirmation screen:

Resident Biometric confirmation .

Operator Biometric confirmation .

5.3 Authentication and attached enclosures



Click on Attach document

Browses /scan document from respective location.



Click on Save after the successful attachment

After above process click on verify on both resident and operator.



5.4 Insert the payment Authentication Code:

Click on validate PAC

PAC generation is describing on Annexure-1



A successful PAC will be verified.

Click Submit to biometric confirmation once the request is submitted and if successful then “Resident

Enrolment Updated Successfully” message appears on the screen.



Note: There are three submit attempts each for operator and resident to capture fingerprints. If all three

submit attempts are failed or exceeded, the transaction needs to be restarted from the beginning.

Click check box, to generate declaration in local language

Operator or Supervisor needs to click Print Receipt to generate resident receipt.

---------------------------------------------------



Annexure-1

For generation of PAC.

Log in to apna CSC portal.

o VLE services UIDAI Services Aadhaar Demographic Update

Enter Aadhaar Number & Service type



Fill wallet password.

.

A PAC will be generated which will be used in UCL. And UCL will generate the Update Request

Number which will be submitted by Operator.

-----------------------------------------------------------

Documents

Demographic Update through Update Client Lite (UCL)...Operator Manual for the Enrolment Process – UCL @CSC CSC-SPV, 2016 Page 2 of 18 1. About Demographic Update and UCL (Update