DEPARTMENT OF MECHANICAL ENGINEERING DR. …dbatuonline.com/admin/uploads/1470135439.pdf · department of mechanical engineering dr. babasaheb ambedkar technological university, lonere,

DEPARTMENT OF MECHANICAL ENGINEERING DR. BABASAHEB AMBEDKAR TECHNOLOGICAL UNIVERSITY, LONERE, RAIGAD-402103 PROSPECTUS 2016-17

1

Salient Features

Established in the year 1992, the Department of Mechanical Engineering offers following academic programs: (i) B. Tech. in Mechanical Engineering, (ii) M. Tech. in Manufacturing Engineering, (iii) M. Tech. in Thermal & Fluids Engineering and (iv) Ph.D. The department takes pride in its highly qualified and motivated faculty members most of whom are PhDs from IITs. The alumni of the Department have made a mark in industry and profession. Over the years, the department has maintained good academic and research culture. As a result, the faculty members in the department have published more than 600 papers in peer-reviewed international journals and conferences so far. Further, some of the laboratories have developed innovative products which are being patented for commercial usage. The Department has strong linkages with institutes like IIT Bombay and BARC. In addition, the Department has also conducted several continuing education programs (CEPs) and STTPs for the benefit of faculty and industry personnel.

Our Mission

Imparting quality education, looking after holistic development of students and conducting need-based research and extension.

Our Vision

The vision of the department is to achieve excellence in teaching, learning, research and transfer of technology and overall development of students.

Our Objectives

• To provide quality education. • To create world class educational facilities. • To provide conducive atmosphere for higher studies and research among the

students and the faculty. • To provide the platform for filing patents, publications and books.


2

About the University

Dr. Babasaheb Ambedkar Technological University is one and only one of its kinds in the Maharashtra State. It is autonomous in nature. This University was established on 5th May 1989 by the Government of Maharashtra under the Dr. Babasaheb Ambedkar Technological University Act No. XXII,1989.

1st March 2016 is another milestone now in the history of this university as it becomes the State Technical University, by Government of Maharashtra Act No. XXIX, 2014, to which the Engineering and Technology, Pharmacy, Architecture and Hotel Management and Catering Technology Institute from the State shall get affiliated over the next few years. The University is committed to provide guidance and directions in the technical education, research and development to meet the needs of the industry, business, and the society at large. Although relatively young, the University is making its mark in the field of research and technological services through its dedicated faculty and disciplined students.


3

A Message from Head of the Department

“The future belongs to those who prepare for it today.”

A warm welcome to the Department of MECHANICAL ENGINEERING

It gives me immense pleasure to introduce you to the department of Mechanical Engineering for the year 2016-17. It is a matter of great pride that the Department has made consistent progress, year on year, in academic and co-curricular activities. The level of education offered by this Department is up-to-date and appropriate to the needs of the industry and profession.

Overall development of the individual is the goal of education and we all have to ensure that there is no stone left unturned to equip the student of today for the challenges of life. The Department, through state-of-the-art laboratories and conducive environment, facilitates learning and development of students. We provide our students opportunities to engage in experiments, design work, project work, industrial training, professional society activities and team work to enhance the learning process. Each of our faculty members is engaged in meaningful research and innovation by involving not only Ph.D./M. Tech students but also B. Tech students.

Our mission is to prepare our students to apply basic and advanced engineering knowledge and skills to the design, analysis and research of engineering systems; to prepare them to compete successfully in today's job market and for lifelong learning. In addition to good teachers, we also provide our students with an innovative and engaging curriculum. The holistic approach of the department stimulates innovation among students by inspiring fresh ideas with different perceptiveness, creative thinking and strong conviction to achieve true success. I take this opportunity to thank teaching as well as non-teaching staff and students, who are rendering their wholehearted support and co-operation to make the department a centre of excellence. I extend my best wishes to all the students in their chosen career path.

Dr. P.K. Brahmankar Professor & Head


4

Department of Mechanical Engineering Programme Educational Objectives (PEOs)

To prepare students to excel in technical fields in order to peruse post-graduate programmes or to succeed in industry/technical profession, R&D institutions through global and new emerging areas in Mechanical Engineering.

To provide students with solid foundation in scientific and engineering fundamentals required to solve engineering problems.

To develop in students, professional and ethical attitude, effective communication skills, leadership, teamwork skills, multi-disciplinary approach, and an ability to relate engineering issues to broader socio-economic context.

To provide students conducive academic environment, awareness of excellence and the life-long learning needed for successful professional carrier.

Programme Outcomes (POs)

The graduates will possess the knowledge of differential equations, vector calculus, complex variables, matrix theory, probability theory, physics, chemistry, and mechanical engineering.

The graduate will demonstrate and ability to identify, formulae and solve mechanical engineering problems.

The graduates will have and ability to design, machine elements, analyze and interpret data.

The graduates will possess the knowledge of advanced and emerging topics in the field of mechanical engineering.

The graduate will demonstrate the skills to use modern tools software & equipments to analyze and solve real life problems.

The graduates will possess the communication skills necessary to communicate engineering ideas. The skills set include verbal, written and listening skills.

The graduate will demonstrate the ability to work and collaborate in heterogeneous teams.

The graduate will demonstrate the awareness of professional and ethical responsibilities.

The graduates will develop self confidence and ability for life-long learning.


5

Overview of Academic Programme Sr. No. Course Intake Year of Establishment

1 UG 60 1991 2 PG (Manufacturing) 18 2001 3 PG (Thermal) 18 2001 4 Ph.D. 33 2003

List of Faculty Members

Sr. No. Faculty Name Designation Academic

Qualification Specialization Teaching Experience

1 Dr. P. K. Brahmankar Professor Ph.D. IIT Bombay

(Mechanical Engg.)

Manufacturing Engineering 32 Yrs.

2 Dr. M. S. Tandale Professor Ph.D. IIT Bombay

(Mechanical Engg.)

Thermal Engineering 28 Yrs.

3 Dr. V. G. Sargade Professor

Ph.D. IIT Kharagpur

(Mechanical Engg.)

Manufacturing Engg. 18 Yrs.

4 Dr. M. Sadaiah Associate Professor

Ph.D. PSG Tech Coimbatore (Mechanical

Engg.)

Manufacturing Engg.

CAD/CAM, Mechatronics

28 Yrs.

5 Dr. R. P. Kate Associate Professor

Ph.D. IIT Kharagpur

(Mechanical Engg.)

Thermal and Fluids Engg. 29 Yrs.

6 Dr. Neeraj Agarwal Associate Professor

Ph.D. IIT Kharagpur

(Mechanical Engg.)

Thermal Engg., Refrigeration

and Air Conditioning

21 Yrs.

7 Dr. R. S. Pawade Associate Professor

Ph.D. IIT Bombay (Mechanical

Engg.)

Manufacturing Engineering 25 Yrs.

8 Dr. H. N. Warhatkar Associate Professor

Ph.D. IIT Delhi (Mechanical

Engg.)

Design Engg., Bio-Mechanics 21 Yrs.

9 Dr. B. F. Jogi Associate Professor

Ph.D. IIT Bombay (Mechanical

Engg.)

Material Science, Polymers

17 Yrs.


6

10 Dr. H. S. Joshi Assistant Professor

Ph.D. IIT Kharagpur

(Mechanical Engg.)

CAD/CAM, FEM, Robotics 16 Yrs.

11 Mr. G. S. Warkhade (On QIP Deputation)

Assistant Professor

M. Tech Thermal & Fluids Engg.)

Ph.D. NIT Warangal (Ongoing)

Thermal and Fluids Engg. 16 Yrs.

12 Mr. D. B. Waghmare (On QIP Deputation)

Assistant Professor

M. E. Production Engg.

Ph. D. IIT Kharagpur (Ongoing)

Non Traditional Machining 13 Yrs.

13 Mr. S. R. Dhale Assistant Professor

M. E. Design Ph. D. (Ongoing)

Design Engg. Metrology 15 Yrs.

14 Mr. ShripadNirantar Assistant Professor

M. E. Design Ph.D. (Ongoing) Polymers 7 Yrs.

15 Mr. BabasahebShinde Assistant Professor

M. E. Manufacturing

Engg. Ph.D. (Ongoing)


16 Mr. Ajay Chavan Assistant Professor

M. E. Manufacturing

Engg. Ph.D. (Ongoing)


17 Mrs. RupaliShet Assistant Professor

M. E. Manufacturing

Engg.


Non-Teaching Staff

Sr. No. Name Designation Qualification Experience

1 Mr. A. B. Chaudhary Lab Technician SSC, NCTVT

(Chemical), B.A. 26 years

2 Mr. S. G. Lad Lab Technician B.Sc. (Chemistry) 23 years

3 Mrs. A. U. Sakate Lab Assistant B.Sc. 7.6 years

4 Mr.G. B. Pashte Lab Attendant S.S.C. 23 Yrs.


7

List of Laboratories and Computing Facility 1 Refrigeration and Air Conditioning Lab

2 Fluid Mechanics and Fluid Machinery Lab

3 Heat Transfer Lab

4 Renewable Energy Lab

5 I.C. Engine / Thermal Engineering Lab

6 Material Science / Engineering Metallurgy Lab

7 Material Testing Lab (SOM)

8 Photochemical Machining Lab (PCM)

9 Theory of Machines And Machine Dynamics Lab/ Engineering Mechanics Lab

10 Machine Design Lab

11 Metrology and Quality Control Lab

12 CAD / CAM Lab

13 Robotics and Mechatronics Lab

14 Center for Advanced Machining Technology (CAMT)


8

COURSE STRUCTURE (Draft) Semester I

Sr. No. Subject Teaching scheme Credits

L P T C

01 Engineering Mathematics I 3 -- 1 4

02 Engineering Mechanics 3 2 -- 4

03 Engineering Physics /OR Engineering Chemistry 3 2 1 5

04 Engineering Graphics/OR Workshop Practices

2 --

4 3

-- --

5 4

05 Basic Electrical Engineering/ OR Basic Electronics Engineering 3 2 -- 4

06 Basic Mechanical Engineering /OR Basic Civil Engineering 3 -- -- 3

07 Energy and Environmental Engineering OR Basic Computer Programming

2 3

-- 2

-- --

2 4

08 NCC/NSS/Sports/ Arts 0 0 0 0

Total 19 10 02 27

Semester II Sr. No. Subject L P T C

01 Engineering Mathematics II 3 -- 1 4

02 Engineering Mechanics/OR Communication Skills

3 2 -- 4

03 Engineering Chemistry/OR Engineering Physics 3 2 1 5

04 Workshop Practices /OR Engineering Graphics

-- 2

3 4

-- --

4 5

05 Basic Electronics Engineering/ OR Basic Electrical Engineering

3 2 -- 4

06 Basic Mechanical Engineering /OR Basic Civil Engineering

3 -- -- 3

07 Basic Computer Programming /OR Energy and Environmental Engineering

3 2

2 --

0 --

4 2

08 NCC/NSS/Sports/ Arts 0 0 0 0 Total 18 11 2 28

Grand Total 38 28 2 55


9

Semester III Sr. No. Subject L P C MSE ESE

01 Materials Science and Metallurgy 4 0 8 30 70 02 Strength of Materials 4 0 8 30 70

03 Machine Drawing and Computer-aided Drafting 2 0 4 30 70

04 Thermodynamics 4 0 8 30 70 05 Fluid Mechanics 4 0 8 30 70 06 Engineering Mathematics-III 4 0 8 30 70

07 Machine Drawing and Computer-aided Drafting Lab

0 2 4 50 50

08 Seminar Report and Presentation** 4 09 NCC/NSS/Sports/Arts

Total 22 2 52 230 470 ** Self Study Report on any Topic of Choice based on the Subjects studied so far or beyond

Semester IV Sr. No. Subject L P C MSE ESE

01 Manufacturing Processes-I 3 0 6 30 70 02 Theory of Machines and Mechanisms-I 3 0 6 30 70 03 Machine Design-I 3 0 6 30 70 04 Applied Thermodynamics 4 0 8 30 70 05 Electrical and Electronic Devices 4 0 8 30 70 06 Elective –I 4 0 8 30 70 07 History of Science and Technology* 4 50 08 Fluid Mechanics Lab 0 2 2 50 50 09 Manufacturing Processes Lab-I 0 2 2 50 50 10 Strength of Materials Lab 0 2 2 50 50 11 Materials Science and Metallurgy Lab 0 2 2 50 50 12 Industrial Exposure** 13 NCC/NSS/Sports/Arts

Total 21 8 54 430 620 * Self Study Course (Objective University Level Common Exam.) ** Two weeks in Industry Elective I:

• Humanities and Social Sciences • Professional Ethics • Renewable Energy Sources


10

Semester V

Sr. No. Subject L P C MSE ESE 01 Manufacturing Processes-II 3 0 6 30 70 02 Theory of Machines and Mechanisms-II 3 0 6 30 70 03 Heat Transfer 4 0 8 30 70 04 Mechanical Measurements and Metrology 4 0 8 30 70 05 Elective II 4 0 8 30 70 06 Mechanical Measurements and Metrology Lab 0 2 2 50 50 07 Theory of Machines and Mechanisms Lab I 0 2 2 50 50 08 Electrical and Electronic Devices Lab 0 2 2 50 50 09 Thermal Engineering Lab 0 2 2 50 50 10 Industrial Exposure** 11 NCC/NSS/Sports/Arts

Total 18 8 44 350 550 ** Evaluation of Two weeks Industrial Exposure Elective II:

• Engineering Economics • Quantitative Methods in Project Management • Appropriate Technology • Knowledge Management • Nuclear Power Plants

Semester VI Sr. No. Subject L P C MSE ESE

01 Manufacturing Processes-III 3 0 6 30 70 02 Dynamics of Machines 3 0 6 30 70 03 Machine Design-II 3 0 6 30 70 04 I.C. Engines and Fluid Machinery 4 0 8 30 70 05 Elective III 3 0 6 30 70 06 Manufacturing Processes Lab-II 0 2 2 50 50 07 Machine Design Practice-I 0 2 2 50 50 08 I. C. Engines and Fluid Machinery Lab 0 2 2 50 50 09 Heat Transfer Lab 0 2 2 50 50 10 Industrial Training* 11 NCC/NSS/Sports/Arts

Total 16 8 40 350 550 *Four weeks in Industry Elective III:

• Numerical Methods for Engineering • Sensors for Engineering Applications • Design of Experiments • Sustainable Development • Entrepreneurship Development • Intellectual Property Rights


11

Semester VII

Sr. No. Subject L P C MSE ESE 01 CAD/CAM 3 0 6 30 70 02 Machine Design-III 3 0 6 30 70 03 Refrigeration & Air-conditioning 3 0 6 30 70 04 Elective-IV 4 0 8 30 70 05 Manufacturing Processes Lab-III 0 4 4 50 50 06 Theory of Machines and Mechanisms Lab-II 0 2 4 50 50 07 CAD/CAM Lab 0 2 4 50 50 08 Technical Project for Community Services 0 2 4 50 50 09 Industrial Training Seminar* 4 50 10 Project Stage-I 2 4 50

Total 13 12 50 370 530 * Evaluation of Four weeks Industrial Training Elective IV:

• Engineering Tribology • Tool Condition Monitoring • Robotics • Manufacturing Automation • Computational Fluid Dynamics • Biomechanics • Piping Engineering

• Failure Analysis and Design • Advanced Methods in Engineering Design • Analysis and Synthesis of Mechanisms • Alternative Fuels and Advances in I.C. Engines • Numerical Heat Transfer • M.Tech. subjects

Semester VIII

Sr. No. Subject L P C MSE ESE 01 Mechatronics 3 0 6 30 70 02 Power Plant Technologies 4 0 8 30 70 03 Industrial Engineering and Management 3 0 6 30 70 04 Elective-V 4 0 8 30 70 05 Refrigeration & Air-conditioning Lab 0 2 2 50 50 06 Mechatronics Lab 0 2 2 50 50 07 Manufacturing Processes Lab-IV 0 2 2 50 50 08 Machine Design Practice II 0 2 2 09 Project Stage-II 4 8 100

Total 14 12 44 270 530 ** Students opting for M. Tech Course as Elective IV and V (in 7th and 8th Semester) will be awarded additional 4 Credits Elective V:

• Tool Design • Process Equipment Design • Surface Engineering • Manufacturing Planning and Control • Automobile Engineering

• Experimental Stress Analysis • Product Life-cycle Management • Design for Quality • Finite Element Method • Design of Air-Conditioning Systems

• Advanced Power Generation • M.Tech. subjects


12

Examinations and Grading System

The candidate who obtains 40% and more marks of the total marks of a subject head shall be deemed to have passed the respective subject head.

The performance of a student shall be documented by a letter grade. Each letter grade has a Grade Point associated with it. The total marks (in-semester + end-semester) of a candidate in a subject head are converted into a letter grade, based on the relative performance of the student.

Letter Grade EX AA AB BB BC CC CD DD DE EE Grade Point 10 9.5 9.0 8.5 8.0 7.5 7.0 6.5 6.0 5.0

Semester Grade Point Average (SGPA) & Cumulative Grade Point Average (CGPA)

A SGPA & CGPA will be computed as follows:

𝑆𝑆𝑆𝑆𝑆𝑆𝑆𝑆 =(∑ 𝑐𝑐𝑖𝑖𝑔𝑔𝑖𝑖𝑛𝑛

𝑖𝑖=1 )(∑ 𝑐𝑐𝑖𝑖𝑛𝑛

𝑖𝑖=1 ) 𝐶𝐶𝑆𝑆𝑆𝑆𝑆𝑆 =∑ 𝑠𝑠𝑖𝑖𝑚𝑚𝑖𝑖=1 𝑐𝑐𝑖𝑖∑ 𝑐𝑐𝑖𝑖𝑚𝑚𝑖𝑖=1

Where ‘n’ is the number of subjects for the semester, ‘ci’ is the number of credits allotted to a particular subject, ‘gi’, is the grade points awarded to the student for the subject based on his performance as per the above table, ‘si’, is the SGPA of that semester.

Competitive Exam Qualified

Every year students from final year B.Tech are appearing for GATE examination. In this year about 11 students have cleared GATE-2016 examination.

Sr. No. Name Gate Marks 1 Akshay Joshi 49.35 2 MayureshKange 38.79 3 ShivprasadMawal 35.67 4 AniketGunjal 34.96 5 ManojPatil 28.00 6 Vishal Wankhede 28.00 7 SupriyaDhone 53.74 8 ShubhankarGurav 55.00 9 SumitTetgure 34.00 10 Tushakrant Pate 49.00 11 JeetendraJangid 42.61


13

Department Activities MESA

Debate Competition under MESA

ISHRAE

Inauguration of ISHRAE Students’ Chapter for the year 2015-16


14

SAE

Vehicle designed and manufactured by students for SAE BAJA competition

Student Placement

Following students from the department have got campus placement during year 2015-16. Sr. No. Roll No. Name Company

1 20120146 Manoj Patil Max Val Technologies pvt.ltd. Mumbai 2 20120115 Pooja Gole Galaxy Roofing India Pvt. Ltd. Pune 3 20120135 Vaibhav Leharkar Galaxy Roofing India Pvt. Ltd. Pune 4 20120115 Atmaram V Gaware Galaxy Roofing India Pvt. Ltd. Pune 5 20120121 Shraddha Imandar Kiroshkar Chillers 6 20120114 Mayur Garad Anukool Pvt. Ltd., Mumbai 7 20120136 Jagruti Mahamunkar SARA HVAC 8 20120110 Lahu Dhigole Anukool Pvt. Ltd., Mumbai 9 20120133 Ashwin Kolte Anukool Pvt. Ltd., Mumbai 10 20130178 Vishal Potdar Sudarshan Chemicals Ltd. Roha 11 20120136 Gajanan Modi Rashtriya Industries, Vasai 12 20120141 Rushikesh oak Galaxy Roofing India Pvt. Ltd. Pune 13 20120156 Yash Sawant Galaxy Roofing India Pvt. Ltd. Pune 14 20120155 Pranay Sawant Vighneshwar Industries Pvt. Ltd. Mumbai


15

Examination Scheme

The University has adopted continuous assessment credit based system to evaluate the performance of the student. There will be a mid-semester examination of 30 marks, internal assessment of 20 marks and end semester examination of 50 marks. The laboratory courses are assessed on continuous basis. Internal Assessment of 20 Marks For each course there is an internal weightage of 20 marks. The assessment tool may include Quiz, Assignments, Mini-projects, Presentations, Surprise Tests, Seminar, Attendance, etc.Depending upon the course outcomes, teacherwill select the suitable and effective toolfor assessment. Accordingly, teachermay fix up the weightage for each or some of the effective tools. All these tools assessment needs to be planned and executed in accordance with examination schedule of the department.

Alumni Meet

Department organizes Alumni meet regularly. Recently it was organized by department on 06th April 2016.About sixty fivealumni attend the event and shared their experience. They shared their experience as well as interesting moments of their campus life to the audience. They also shared their expectations from the department and hope they can contribute for the development of the department. An interaction session was organized with alumni so that students get proper guidance for the various opportunities after engineering, preparations for various exams like GATE, GRE, TOEFL, and research opportunities.

Students WelfareDepartment has Parent Teacher Association. The feedback taken from the parents is considered for appropriate corrections/ improvements in the system so as to improve quality of the education.

Department also has Guidance and Counseling Cells for Counseling of the needful and students.


16

Contact Details Sr. No. Faculty Name Email ID

1 Dr. P. K. Brahmankar [email protected]

2 Dr. M. S. Tandale [email protected]

3 Dr. V. G. Sargade [email protected] 4 Dr. M. Sadaiah [email protected] 5 Dr. R. P. Kate [email protected]

6 Dr. Neeraj Agarwal [email protected]

7 Dr. R. S. Pawade [email protected] 8 Dr. H. N. Warhatkar [email protected]

9 Dr. B. F. Jogi [email protected]

10 Dr. H. S. Joshi [email protected] 11 Mr. G. S. Warkhade [email protected] 12 Mr. D. B. Waghmare [email protected]

13 Mr. S. R. Dhale [email protected]

14 Mr. Shripad Nirantar [email protected]

15 Mr. Babasaheb Shinde [email protected]

16 Mr. Ajay Chavan [email protected]

17 Mrs. Rupali Shet [email protected] ADDRESS FOR CORRESPONDENCE

DR. P K BRAHMANKAR HEAD, DEPARTMENT OF MECHANICAL ENGINEERING DR. BABASAHEB AMBEDKAR TECHNOLOGICAL UNIVERSITY, LONERE, RAIGAD-402103 EMAIL: [email protected] PHONE: 02140-275142

mailto:[email protected]















Documents

DEPARTMENT OF MECHANICAL ENGINEERING DR. …dbatuonline.com/admin/uploads/1470135439.pdf · department of mechanical engineering dr. babasaheb ambedkar technological university, lonere,