Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Issue 1 9/3/15
SPECIFICATION SHEET
25kg m3 Closed Cell PE Foam
All data is based on a 10mm thick sample
The above figures are average values and should be considered as guidelines not specifications.
While reasonable care has been taken to ensure that this data is representative, Alanto Ltd does
not warrant or otherwise guarantee, expressly or impliedly, the suitability, accuracy, reliability or
completeness of the information.
We recommend evaluation prior to use to ascertain the suitability of the material for the
application.
Unit 21 & 23 Regal Drive, Walsall Ent Park, Walsall, WS2 9HQ
Tel : 01922 723740 – Fax : 01922 724284 – Email : [email protected]
Desc. Standard Value Unit
Density ISO 845 25 Kg/m³
Tensile strength ISO 1798 252 kPa
Elongation ISO 1798 161 %
Compression 10% ISO 844 34 kPa
Compression 25% ISO 844 52 kPa
Compression 50% ISO 844 113 kPa
Compression Set -0.5Hrs ISO 1856 16 %
Compression Set -24H ISO 1856 4 %
Compression Set 50% 0.5 Hrs ISO 1856 33 %
Compression Set 50% 24 Hrs ISO 1856 21 %
Working Temperature Range Internal -60 \ 90 ˚C
Water Absorption % Vol (Max) Internal 1 %
Water Vapour Transmission ISO 1663 1.28 g/m²*24h
Thermal Conductivity at 10˚C ASTM C177 0.0380 W/mK
Thermal Conductivity at 40˚C ASTM C177 0.0410 W/mK
Shore-OO ASTM D2240 46 oo
Flammability FMVSS302 67 mm/min
Issue 1 7/7/15
SPECIFICATION SHEET
TA3000 – 33kg PE Foam
PROPERTY SPECIFICATION AVE VALUE MAX UNIT
Density ISO-845 33 Kg/m³
Tensile Strength @ 23˚C (Lengthwise at Break) ISO-1926 410 kPa
Tensile Strength @ 23˚C (Crosswise at Break) ISO-1926 280 kPa
Elongation @ 23˚C (Lengthwise) ISO-1926 130 %
Elongation @ 23˚C (Crosswise) ISO-1926 120 %
Compression Deflection 10% ISO-3386-1 26 kPa
Compression Deflection 25% ISO-3386-1 47 kPa
Compression Deflection 40% ISO-3386-1 82 kPa
Compression Deflection 50% ISO-3386-1 120 kPa
Compression Set 25%, 1/2hr Discharge ISO-1856-C 18 %
Compression Set 25%, 24hr Discharge ISO-1856-C 10 %
Thermal Stability – Max Temperature Internal 100 ˚C
Thermal Stability – Shrink, lengthwise & Crosswise Internal 5 %
Shore Hardness 868-1985 12 Shore A
Shore Hardness ASTM D2240 17 Shore O
Shore Hardness ASTM D2240 51 Shore OO
Volume Water Absorption ISO 2896 1.0 %
Flame Resistance FMVSS302 Pass >8mm
The above figures are average values and should be considered as guidelines not specifications.
While reasonable care has been taken to ensure that this data is representative, Alanto Ltd does
not warrant or otherwise guarantee, expressly or impliedly, the suitability, accuracy, reliability or
completeness of the information.
We recommend evaluation prior to use to ascertain the suitability of the material for the
application.
Unit 21 & 23 Regal Drive, Walsall Ent Park, Walsall, WS2 9HQ
Tel : 01922 723740 – Fax : 01922 724284 – Email : [email protected]
Issue 1 2/10/15
SPECIFICATION SHEET
33 kg/m3 Flame Resistant Closed Cell PE Foam
FR Standards : UL94 HF-1, EN 11925-2 CLASS E
All data is based on a 10mm thick sample
The above figures are average values and should be considered as guidelines not specifications.
While reasonable care has been taken to ensure that this data is representative, Alanto Ltd does
not warrant or otherwise guarantee, expressly or impliedly, the suitability, accuracy, reliability or
completeness of the information.
We recommend evaluation prior to use to ascertain the suitability of the material for the
application.
Unit 21 & 23 Regal Drive, Walsall Ent Park, Walsall, WS2 9HQ
Tel : 01922 723740 – Fax : 01922 724284 – Email : [email protected]
Desc. Standard Value Unit
Density ISO 845 33 Kg/m³
Tensile strength ISO 1798 258 kPa
Elongation ISO 1798 179 %
Compression 10% ISO 844 41 kPa
Compression 25% ISO 844 60 kPa
Compression 50% ISO 844 121 kPa
Compression Set 25% -0.5Hrs ISO 1856 14 %
Compression Set 25% -24Hrs ISO 1856 5 %
Compression Set 50% - 0.5 Hrs ISO 1856 37 %
Compression Set 50% - 24 Hrs ISO 1856 19 %
Working Temperature Range Internal -60 / 90 ˚C
Water Absorption % Vol (Max) Internal 1 %
Water Vapour Transmission ISO 1663 1.3 g/m²*24h
Shore-OO ISO 868 52 Shore-OO
Issue 1 9/3/15
SPECIFICATION SHEET
EV22H 240kg m3 Closed Cell PE EVA Foam
The above figures are average values and should be considered as guidelines not specifications.
While reasonable care has been taken to ensure that this data is representative, Alanto Ltd does
not warrant or otherwise guarantee, expressly or impliedly, the suitability, accuracy, reliability or
completeness of the information.
We recommend evaluation prior to use to ascertain the suitability of the material for the
application.
Unit 21 & 23 Regal Drive, Walsall Ent Park, Walsall, WS2 9HQ
Tel : 01922 723740 – Fax : 01922 724284 – Email : [email protected]
Desc. Standard Value Unit
Density ISO 845 240 Kg/m³
Tensile strength ISO 1798 >1500 kPa
Elongation ISO 1798 150 %
Compression 10% ISO 844 320 kPa
Compression 25% ISO 844 400 kPa
Compression Set -24H ISO 1856 4 %
Working Temperature Range Internal -60 \ 80 ˚C
Water Absorption % Vol (Max) Internal 1 %
Shore-A ASTM D2240 38 A
Shore - oo ASTM D2240 80 oo
Issue 2 5/8/15
SPECIFICATION SHEET
165kg m3 Closed Cell PE Foam
All data is based on a 10mm thick sample
The above figures are average values and should be considered as guidelines not specifications.
While reasonable care has been taken to ensure that this data is representative, Alanto Ltd does
not warrant or otherwise guarantee, expressly or impliedly, the suitability, accuracy, reliability or
completeness of the information.
We recommend evaluation prior to use to ascertain the suitability of the material for the
application.
Unit 21 & 23 Regal Drive, Walsall Ent Park, Walsall, WS2 9HQ
Tel : 01922 723740 – Fax : 01922 724284 – Email : [email protected]
Desc. Standard Value Unit
Density ISO 845 165 Kg/m³
Tensile strength ISO 1798 1870 kPa
Elongation ISO 1798 155 %
Compression 10% ISO 844 346 kPa
Compression 25% ISO 844 423 kPa
Compression 50% ISO 844 622 kPa
Compression Set -0.5Hrs ISO 1856 4.0 %
Compression Set -24H ISO 1856 3.0 %
Working Temperature Range Internal -60 \ 90 ˚C
Water Absorption % Vol (Max) Internal 1 %
Thermal Conductivity at 10˚C ASTM C177 0.080 W/mK
Shore-A ASTM D2240 45 A
Shore-OO ASTM D2240 85 oo
Flammability (>2mm) FMVSS302 Pass
Issue 2 5/8/15
SPECIFICATION SHEET
100 kg/m3 Closed Cell PE Foam
All data is based on a 10mm thick sample
The above figures are average values and should be considered as guidelines not specifications.
While reasonable care has been taken to ensure that this data is representative, Alanto Ltd does
not warrant or otherwise guarantee, expressly or impliedly, the suitability, accuracy, reliability or
completeness of the information.
We recommend evaluation prior to use to ascertain the suitability of the material for the
application.
Unit 21 & 23 Regal Drive, Walsall Ent Park, Walsall, WS2 9HQ
Tel : 01922 723740 – Fax : 01922 724284 – Email : [email protected]
Desc. Standard Value Unit
Density ISO 845 100 Kg/m³
Tensile strength ISO 1798 1485 kPa
Elongation ISO 1798 128 %
Compression 10% ISO 844 182 kPa
Compression 25% ISO 844 228 kPa
Compression 50% ISO 844 356 kPa
Compression Set -0.5Hrs ISO 1856 4 %
Compression Set -24H ISO 1856 2 %
Working Temperature Range Internal -60 / 90 ˚C
Water Absorption % Vol (Max) Internal 1 %
Thermal Conductivity at 10˚C ASTM C177 0.0500 W/mK
Thermal Conductivity at 40˚C ASTM C177 0.0520 W/mK
Shore -A ASTM D2240 34 A
Shore-OO ASTM D2240 79 oo
Flammability FMVSS302 51 mm/min
Issue 2 5/8/15
SPECIFICATION SHEET
60 kg/m3 Closed Cell PE Foam
All data is based on a 10mm thick sample
The above figures are average values and should be considered as guidelines not specifications.
While reasonable care has been taken to ensure that this data is representative, Alanto Ltd does
not warrant or otherwise guarantee, expressly or impliedly, the suitability, accuracy, reliability or
completeness of the information.
We recommend evaluation prior to use to ascertain the suitability of the material for the
application.
Unit 21 & 23 Regal Drive, Walsall Ent Park, Walsall, WS2 9HQ
Tel : 01922 723740 – Fax : 01922 724284 – Email : [email protected]
Desc. Standard Value Unit
Density ISO 845 60 Kg/m³
Tensile strength ISO 1798 629 kPa
Elongation ISO 1798 185 %
Compression 10% ISO 844 105 kPa
Compression 25% ISO 844 123 kPa
Compression 50% ISO 844 200 kPa
Working Temperature Range Internal -60 / 90 ˚C
Water Absorption % Vol (Max) Internal 1 %
Thermal Conductivity at 10˚C ASTM C177 0.0400 W/mK
Thermal Conductivity at 40˚C ASTM C177 0.0430 W/mK
Shore-A ASTM D2240 19 A
Shore-OO ASTM D2240 70 OO
Issue 2 5/8/15
SPECIFICATION SHEET
45 kg/m3 Closed Cell PE Foam
All data is based on a 10mm thick sample
The above figures are average values and should be considered as guidelines not specifications.
While reasonable care has been taken to ensure that this data is representative, Alanto Ltd does
not warrant or otherwise guarantee, expressly or impliedly, the suitability, accuracy, reliability or
completeness of the information.
We recommend evaluation prior to use to ascertain the suitability of the material for the
application.
Unit 21 & 23 Regal Drive, Walsall Ent Park, Walsall, WS2 9HQ
Tel : 01922 723740 – Fax : 01922 724284 – Email : [email protected]
Desc. Standard Value Unit
Density ISO 845 45 Kg/m³
Tensile strength ISO 1798 446 kPa
Elongation ISO 1798 227 %
Compression 10% ISO 844 83 kPa
Compression 25% ISO 844 100 kPa
Compression 50% ISO 844 168 kPa
Compression Set 25% -0.5Hrs ISO 1856 7 %
Compression Set 25% -24H ISO 1856 2 %
Compression Set 50% 0.5 Hrs ISO 1856 21 %
Compression Set 50% 24 Hrs ISO 1856 9.5 %
Working Temperature Range Internal -60 / 90 ˚C
Water Absorption % Vol (Max) Internal 1 %
Thermal Conductivity at 10˚C ASTM C177 0.044 W/mK
Thermal Conductivity at 40˚C ASTM C177 0.046 W/mK
Shore-OO ISO 868 61 oo
Flammability FMVSS302 43 mm/min
Issue 2 5/8/15
SPECIFICATION SHEET
45 kg/m3 EEV Closed Cell PE Foam
All data is based on a 10mm thick sample
The above figures are average values and should be considered as guidelines not specifications.
While reasonable care has been taken to ensure that this data is representative, Alanto Ltd does
not warrant or otherwise guarantee, expressly or impliedly, the suitability, accuracy, reliability or
completeness of the information.
We recommend evaluation prior to use to ascertain the suitability of the material for the
application.
Unit 21 & 23 Regal Drive, Walsall Ent Park, Walsall, WS2 9HQ
Tel : 01922 723740 – Fax : 01922 724284 – Email : [email protected]
Desc. Standard Value Unit
Density ISO 845 45 Kg/m³
Tensile strength ISO 1798 438 kPa
Elongation ISO 1798 315 %
Compression 10% ISO 844 36 kPa
Compression 25% ISO 844 55 kPa
Compression 50% ISO 844 118 kPa
Working Temperature Range Internal -60 / 80 ˚C
Water Absorption % Vol (Max) Internal 1 %
Shore-OO ISO 868 46 oo
Issue 2 5/8/15
SPECIFICATION SHEET
30 kg/m3 Closed Cell PE Foam
All data is based on a 10mm thick sample
The above figures are average values and should be considered as guidelines not specifications.
While reasonable care has been taken to ensure that this data is representative, Alanto Ltd does
not warrant or otherwise guarantee, expressly or impliedly, the suitability, accuracy, reliability or
completeness of the information.
We recommend evaluation prior to use to ascertain the suitability of the material for the
application.
Unit 21 & 23 Regal Drive, Walsall Ent Park, Walsall, WS2 9HQ
Tel : 01922 723740 – Fax : 01922 724284 – Email : [email protected]
Desc. Standard Value Unit
Density ISO 845 30 Kg/m³
Tensile strength ISO 1798 282 kPa
Elongation ISO 1798 189 %
Compression 10% ISO 844 44 kPa
Compression 25% ISO 844 62 kPa
Compression 50% ISO 844 122 kPa
Compression Set -0.5Hrs ISO 1856 12 %
Compression Set -24H ISO 1856 4 %
Compression Set 50% 0.5 Hrs ISO 1856 28 %
Compression Set 50% 24 Hrs ISO 1856 16 %
Working Temperature Range Internal -60 / 90 ˚C
Water Absorption % Vol (Max) Internal 1 %
Water Vapour Transmission ISO 1663 1.30 g/m²*24h
Thermal Conductivity at 10˚C ASTM C177 0.0390 W/mK
Thermal Conductivity at 40˚C ASTM C177 0.0410 W/mK
Shore-OO ASTM D2240 54 oo
Flammability FMVSS302 55 mm/min
ISSUE 2 15/3/18
Specification Sheet
DP100 – 100kg PE
Physical Property Test Method Unit of Measure Unit
Compression Set(23±2℃, 22h, 25%
Compression):Measure after 0.5Hrs ASTM D 1056 5-5.5 %
Compression Set(23±2℃, 22h, 25%
Compression):Measure after 24h ASTM D 1056 2-3 %
Compression deflection 10% ASTM D 1056 110-150 kPa
Compression deflection 25% ASTM D 1056 180-200 kPa
Compression deflection 50% ASTM D 1056 260-300 kPa
Density(kg/m3) ASTM D 3575 100-105 Kg/m3
Water absorption ASTM D 1056 0.1-1 %
Tensile strength ASTM D 412 900-983 kPa
Working Temperature range
-60 +90 ◦c
Flammability
pass mm/min
Elongation minimum ASTM D 412 90-105 %
Hardness Shore 00 75-80 00
The above figures are average values and should be considered as guidelines not specifications.
While reasonable care has been taken to ensure that this data is representative, Alanto Ltd does
not warrant or otherwise guarantee, expressly or impliedly, the suitability, accuracy, reliability or
completeness of the information.
We recommend evaluation prior to use to ascertain the suitability of the material for the
application.
Unit 21 & 23 Regal Drive, Walsall Ent Park, Walsall, WS2 9HQ
Tel : 01922 723740 – Fax : 01922 724284 – Email : [email protected]