Embed Size (px)
Citation preview
STAINLESS MOTORS, INC. design innovation • stainless performance
Introducing
HOW CONTAMINATION
HAPPENS
• Food and Pharmaceutical processing facilities have a large amount of equipment to clean
• High cleaning standards required to maintain sanitary environment
• Limited time allowed for cleaning
• Electric motors have a number of crevices and areas that are not visible and not accessible during cleaning
• These areas increase the risk of contamination
We all are familiar with the
“DIRTY LITTLE SECRET”
of TEFC motors.
.ENDBELL, FAN AND AREA INSIDE SHROUD ARE NOT ACCESSIBLE FOR CLEANING
Fan shroud
Endbell and fan concealed inside fan shroud
EXAMPLES OF RISK AREAS
INSIDE FAN SHROUD
.
ON ENDBELL, FAN AND HARDWARE
.
ON ENDBELL, FAN AND HARDWARE
CONVENTIONALDESIGNS THAT CREATE
THE RISK
. TYPICAL COOLING FAN
BLIND POCKETS
Blind pockets and deep crevices conceal contaminants creating a potential hazard.
SHAFT BORE
SCREW THREADS
SHAFT KNURLS
Food particles settle in the knurls making it very difficult to clean.
DEEP KNURLS
DEEP KNURLS
.COMMON FOOT MOUNTING
Conventional foot mounting can easily
conceal contaminants.
FAN SHROUD MOUNTING BRACKET
Food particles and debris have many areas to hide on and around the bracket making it very difficult to clean.
GAPS AND CREVICES
SCREW THREADSAND CREVICES
GAPS AND CREVICES
STANDARD JUNCTION BOXES
GAPS AND CREVICES
GAPS AND CREVICES
GAPS AND CREVICES
.
THE SOLUTION
.
Sanifan® Technology is a patent pending comprehensive solution which dramatically reduces crevices and provides a means of
washing areas previously inaccessible.
. POLISHED CREVICE-FREE STAINLESS FAN
SANITARY FAN TO SHAFT MOUNTING
. CREVICE FREE FAN SHROUD MOUNTING
EPDM SANITARY
STANDOFF
.ENDBELL SANITARY SEAL DESIGN
Double Seal Design to Eliminate
Penetration
Sanitary Stainless Nut Blind Tapped To Eliminate
Crevices
Tapered Shaft/Fan Interface Eliminates
Splines and Crevices
Mechanical Seal
. BLIND TAPPED SANITARY FOOT
TIG Welded Blind Tapped Foot Mount
Sanifan ® Technology is now the sanitary standard for all
motors manufactured by Stainless Motors, Inc.
• Polished stainless crevice free cooling fan• Crevice free fan shroud mounting• Sanitary fan to shaft mounting with blind tapped sanitary nut• Type 304 stainless housing, endbells, feet and junction box• Junction box and feet smoothly TIG welded to body • O-ring sealed endbells• Sanitary seal on junction box• #4 Line finish on all exterior surfaces• Optional Spray endbell
SANIFAN® TECHNOLOGY
SANIFAN® TECHNOLOGY–optional spray endbell
• Integral spray cleaning endbell
• Cleans from inside out
• Multiple port configurations
• Self draining
Sanifan® Technology is available with an optional integral wet spray cleaning endbell for the ultimate
level of cleanability!
SANIFAN® TECHNOLOGY–water port options (spray endbell only)
Water port locations are indicated by “A” for 12:00 orientation (↑), “B’ for a 3:00 orientation (→), “C” for a 6:00 orientation (↓) and “D” for a 9:00 orientation (←). For other water port location, please contact our engineering department.
Tri Clamp Capped Spring valve Pipe
. SIDE BY SIDE COMPARISON
Conventional Design Sanifan® Technology Design
Sanifan® Technology Design With Optional
Spray Cleaning Endbell
.
Email inquiries to: [email protected] Gene Filion – Sales [email protected]
Donna Bertko – [email protected]
John Oleson – [email protected]
Andrew Cook – [email protected]
Stainless Motors, Inc.7601 Nita Pl. NERio Rancho, N.M. 87144
Phone: 505-867-0224Fax: 505-867-0225
www.stainlessmotors.com
Your partner for a cleaner, safer and more sanitary processing environment.
