DETAN ROD SYSTEMS

FAÇADE

DT 08.1-EE

DETAN ROD SYSTEM

DETAN - a c reat ive des ign e lement

DETAN in structural application: In horizontal alignment for cross bracing, In vertical alignment for suspension.

DETAN as a creative design element: lightweight, elegant, aesthetically pleasing, integrated, unobtrusive.

Project:Civil Justice Centre,Manchester

2

DETAN ROD SYSTEM

DETAN - a s t ructura l e lement wi th aes thet ic c la im

DETAN in structural application: Cross bracing enables a modern, lightweight construction.

DETAN in this project used within the glazed facade providing structural support.

DETAN as an aesthetically integrated element - lightweight, components fulfil their technical requirements without intrusion.

Project:The Sage, Gateshead

3

DETAN ROD SYSTEM

Label with project-specific data

Pre-assembled delivery

Corrosion protection

The DETAN Rod Sys tem: Advantages at a g lance

With ETA-05/0207 of the European Technical Licensing authority the tension system DETAN-S460 fulfils all important product characteristics being significant in terms of fulfilment of planning laws in the members of the EU states.

With its CE mark HALFEN confirms compliance with the documenting procedures as described above as well

Quick and economical

Reduction of assembly errors•Saving time by reducing assembly •costs

Reliable and durable

Tension rods completely hot-dip •galvanised after the manufacturing processNo danger of hydrogen •embrittlementNo zinc flaking •Large spanner flats for reliable •tightening

Licenses

as conformity with the licensing procedure. The type test according to EC3 on the basis of European Technical Licensing provides additional safety and service: The documentation of verified structural calculations for the tension rod system DETAN-S460 issued by LGA Würzburg (acknowledged inspection authorities of the Federal Ministry).

Simple and customer-oriented

Clear assignment•Simple sorting•Optimum and quick construction •site logisticsCustomer-specific information•

In major projects the label allows easy identification and sorting of different rod systems. Included are product- specific data - e.g. system length, dimensions etc. On request inclusion of project- specific data e.g. storey levels, is possible.

The DETAN Rod Systems offers a high protection against corrosion - e.g. threads, especially in high-risk applications such as marine environments.

Another quality improvement: Spanner flats are milled and hot-dip galvanised.

The DETAN Rod Systems are delivered in a pre-assembled state, where possible. Depending on system length,

delivery in several parts may be necessary to avoid damages in transit.

Seals (standard) hot-dip galvanisedhot-dip galvanised (brushed)Threaded plug

Qual i t y character is t i cs

4

DETAN ROD SYSTEM

Sys tem over v iew

Basic system:

System variants:

with couplers or with couplers with lug

DETAN Tension Rod

Anchor disc for cross bracing

with cross coupler for cross bracing

DETAN Tension Rod System

DETAN Compression Rod

Cross bracing consisting of one anchor disc and up to 8 basic systems

Cross bracing consisting of one system variant with cross coupler and one basic system

Suspension consisting of a system variant with coupler with lug and one basic system

Order procedure p. 6Load capacity, system dimensions and materials p. 10 + 12

Order procedure p. 6Dimensions and materials p. 11 + 13

Order procedure p. 8Load capacity, system dimensions and materials p. 14

Order procedure → p. 7Dimensions and materials p. 11

Order procedure p. 8Dimensions and materials p. 11 + 13

Cross bracing:

DETAN Compression Rod System

5

System DETAN-S-460, type-tested on the basis of the European technical approval ETA-05/0207

System - Ø ds [mm] 10 12 16 20 24 27 30 36 42 48 52 56 60 76 85 95

Available minimum system length L [mm]

Rod hot-dip galvanised 250 310 360 440 520 560 600 700 810 940 990 1050 1160 1480 1640 1810

Available maximum system length L with one rod [mm]

Rod hot-dip galvanised 6060 6070 12080 12100 12120 12140 12140 12170 12220 12260 12270 12290 12320 15430 15480 15530

System DETAN-E of stainless steel, type-tested

System - Ø ds [mm] 6 8 10 12 16 20 24 27 30

Available minimum system length L [mm]

polished 190 210 250 310 360 440 520 560 600

Available maximum system length L with one rod [mm]

polished 3040 6050 6060 6070 6080 6100 6120 6140 6140

Materials and designs of all construction parts and special designs p. 10 + 12

DETAN ROD SYSTEM

System length L

System length L

System length L

System-Ø ds

System-Ø ds

System-Ø ds

Product range over v iew : DETAN Tens ion Rod Sys tems

Bas ic sys tem

Order procedure

Product / System DETAN / System Ø ds / System length L / specification

Order example (material steel): Tension Rod System, DETAN-S460, ds=52mm, L = 3620 mm fv

Sys tem var iants

with coupler:

Order example (material stainless steel): Tension Rod System, DETAN-E, ds=24mm, L = 11200 mm, 2 couplers

Note: Maximum 5 couplers possible

with coupler with lug:

Order example (material steel): tension rod system, DETAN-S460, ds=30mm, L = 34000 mm fv, 3 couplers with lug

Note: Maximum 5 couplers possible Delivery in single components

Tension Rod System, DETAN S-460, ds=30mm, L = 4500 mm fv, 1 couplerExample order:

6

System DETAN S-460, type-tested EC3

System - Ø ds [mm] 16 20 24 27 30 36

Available minimum system length L [mm]

Rod hot-dip galvanised 1100 1200 1400

Materials and designs of all construction parts and special designs p. 10 + 11

DETAN ROD SYSTEM

System length L

System-Ø ds

Product range over v iew : DETAN Tens ion Rod Sys tems

Sys tem var iants

Sys tem var iant wi th asymmetr ic d is t r ibut ion of couplers

Order with specification of system length L:

Halfen calculates the rod lengths and minimum and/or maximum system length. The couplers are distributed symmetrically. If an asymmetric distribution of the couplers is desired, a dimensioned drawing must be included, or the order has to be made via the Halfen dimensioning software p. 9

Note: Maximum 2 cross couplers possible Delivery in single components

with cross coupler for cross bracing:

Order example (material steel): Tension Rod System, DETAN S460, ds=30mm, L=5600mm fv, 1 cross coupler

Order example: Tension Rod System, DETAN-S460, ds=24, System length according to drawing, wb, couplers according to drawing Tension Rod System, DETAN-S460, ds=10, System length L=1050mm wb

Complex tension rod systems are co-ordinated by Halfen as complete systems. A drawing with system dimensions is sufficient.

L1=12000mm L2=800mm L3=850mm L4=12000mm

L=25650mm

L=10

50m

m

ds=24mm

ds=10mm

7

α

α

β

System DETAN-S355

Compression Rod Ø Ds 42 54 60 76 89 114

Fork connector Ø ds according to structural calculations p. 14

Available minimum system length L [mm]

hot-dip galvanised 1000

Available maximum system length L with one rod [mm]

hot-dip galvanised 6340 6380 6440 6540 6610 6710

System DETAN-S460 on the basis of the European technical approval ETA-05/0207

System - Ø ds [mm] ds 10 12 16 20 24 27 30 36 42 48 52 56 60 76 85 95

System DETAN-E of stainless steel, type-tested

System - Ø ds [mm] ds 6 8 10 12 16 20 24 27 30

DETAN ROD SYSTEM

System-Ø DsSystem-Ø ds

System length L

Syste

m- Ø ds

Syste

m- Ø ds

Width W [mm]

Hei

ght

H [

mm

]

Width W [mm]

Hei

ght

H [

mm

]

Product range over v iew : Cross brac ings,DETAN Compress ion Rod Sys tem

Materials and designs of all components plus special designs p. 14

Order example: Compression Rod System, DETAN-S355, Ds= 42mm, L=2000mm; Fork connector ds=16mm

As an addition to DETAN Tension Rod System Halfen also offers compression rods which can be incorporated perfectly from a technical as well as visual approach into the system. Compression rods consist of large diameter tubes, which are reduced at each end to be used with standard DETAN fork connectors to the structure.

Cross brac ing

1. Order example (material steel): Anchor disc, DETAN-S460, ds=42mm, 4 bore holes, α 40°, β 140° (see drawing), fv

Anchor disc:

2. Order example (material stainless steel): Anchor disc, DETAN-E, ds=24mm, 8 bore holes, α 45° (see drawing)

Note:max. 8 tension rod connections •possibleConnecting angle α min = 40°•

Inquiries for bracing with cross couplers or anchor disks as a complete system can be accepted. The provision of a dimensioned drawing is sufficient to process the inquiry.

Note: System DETAN-E on request Delivery in single components

Compress ion Rod

8

• Tension rod (specify rod length separately) •Pin

•Fork connection set: Fork, locking nuts, pins, circlips, seal kit , left-hand thread

•Lockingnut,left-handthread

•Lockingnut,right-handthread

•Fork connection set: Fork, locking nuts, pins, circlips, seal kit , right-hand thread

•Flatseal

•Roundseal

•Coupler set: coupler + 2 locking nuts, seal kit

•Circlipforonefork

•Coupler with lug set: coupler with lug + 2 locking nuts, seal kit

•Coupler,withlug

•Couplerwithoutlug

•Cross coupler set: cross coupler + 2 locking nuts, seal kit

• Fork, left-hand thread

• Fork, right-hand thread

• Spanner • Cross coupler

If individual system components are used the type test and licensing are not valid. not available with stainless steel

DETAN ROD SYSTEM

Product range over v iew : Set ar t ic les and indiv idual components , DETAN sof tware

Materials, designs and dimensions according to tables p. 10 - 14

DETAN Dimens ioning Sof tware

2. Order example: Tension rod, DETAN-E, ds = 10, L = 500mm, thread length left = 120mm, thread length right = 150mm

The DETAN dimensioning software: Structural calculation and planning tool in one program.

User-friendly program interface•Structural calculations of the system •applying tensile forces according to the DIN18800 or the new standard (EC3)Type-tested structural calculations of the •tension rod systemsSelection of various materials and •surfacesPlanning and ordering of individual •solutions and standardsTransferring the dimensioning results to •parts lists, with individual items as printed listLatest program versions at all times •available on the Internet www.halfen.co.uk

1. Order example: Connection set, DETAN-S460, ds = 20, left-hand thread, fv

Set ar t ic les and indiv idual components

9

System load capacities, System- und available rod lengths; Material specification: steel strength grade S355 (Ø ds 10-12) resp. S460N

System - Ø ds [mm] 10 12 16 20 24 27 30 36 42 48 52 56 60 76 85 95

System load capacities

Load capacity NR,d [kN] 21.3 30.94 70.5 110.2 158.6 206.7 252.3 367.5 504.4 662.9 791.0 913.5 1063 1750 2227 2823

Available minimum system length L [mm]

black, h.d. galvanised 250 310 360 440 520 560 600 700 810 940 990 1050 1160 1480 1640 1810

Available maximum system length with one rod [mm] Â

black, h.d. galvanised 6060 6070 12080 12100 12120 12140 12140 12170 12220 12260 12270 12290 12320 15430 15480 15530

Available maximum rod length L [mm]

black, h.d. galvanised 6000 12000 15000

NR,d: Design load acc. to type-testing on basis of the European technical approval ETA-05/0207, the partial safety factor acc. to ETA recommendation on material side γM1= 1.1 and γM2= 1.25 has been supplied in the calculation Longer system lengths L consisting of several rods with connecting couplers possible

System components - Materials and finish

Tension rod Fork Couplers, locking nuts Anchor disc

System - Ø ds [mm] 10 - 12 16 - 95 10 - 12 16 - 95 10 - 95 10 - 95

Material S355J2 S460N S355J2 G20 Mn5+QT S355J2/S235JR S355J2

Finishfv h.d. galvanised geomet coated geomet coated h.d. galvanised

wb mill finish geomet coated geomet coated h.d. galvanised

Four-layer coating consisting of zinc and aluminium lamella which are applied in cold immersion or injection procedures before being exposed to 300°C.The coating is free of chrome oxide and heavy metals

System dimensions [mm]; Materials: see table above

System - Ø ds 10 12 16 20 24 27 30 36 42 48 52 56 60 76 85 95

Fork length LDT 60 73 89 110 133 147 160 192 225 265 285 305 335 460 520 580

Pin length lB 28 32 44 52 60 65 72 84 97 111 119 130 139 180 202 229

Fork breadth p 20 24 33 40 46 51 57 68 79 90 98 107 116 146 166 189

Fork height q 26 31 41 51 61 69 75 90 105 119 125 137 146 196 216 236

Screw-in depth om 15.0 18.5 22.5 27.0 34.0 37.5 42.5 51.0 55.0 62.5 70.5 77.5 85.0 115 130 155

Screw-in adjustment oj 5.0 6.5 7.5 8.0 11.0 12.5 12.5 14.0 15.0 17.5 20.0 22.5 25.0 39 45 60

Length locking nut M 24.5 37.0 41.0 50.0 58.0 63.0 64.0 72.0 83.0 91.0 98.0 105 112 148 165 205

Tension rodSpanner width hook spanner

8 10 14 18 21 24 27 32 36 41 46 50 55 90/6 90/6 155/6

Locking nuts Use soft touch pliers

hook spanner

25-28 30-32 34-36 40-42 45-50 52-55 68-75 68-75 80-90 80-90 80-90 155/8 155/8 230/10

Length locking nut r

→ see table dimensions connecting plate page 7Pin hole diameter j

Thickness conn. plate b

Delivery time on requestCorrosion protection: rod thread hot-dip galvanised, fork ends sealed off with thread stopper, also see seal system p. 14

DETAN ROD SYSTEM

System length L

Fork

Sys tem DETAN-S460, t ype - tes ted on bas is of the European technica l approval ETA -05/0207

10

d s

LM

om

+ jo - jo

k M

d s

LM

k M

dsa

d s

LM

d M

ds

dsk

dKMLKM

αm

in =60°-90°

Ø j

Øf

b

Øg

αmin 40°

Anchor disc dimensions [mm]; Material specification: Steel strength grade S355J2, hot-dip galvanised

System diameter ds 10 12 16 20 24 27 30 36 42 48 52 56 60 76 85 95Diameter of circ.hole Ø f 90 110 140 180 210 240 260 310 360 420 450 490 520 702 777 832Outer anchor disc g 120 146 186 238 280 318 346 412 480 558 600 652 692 960 1075 1150

Dimensions [mm]; Material specification: Steel strength grade S355J2

System diameter ds 10 12 16 20 24 27 30 36 42 48 52 56 60 76 85 95Coupler length LM 40 50 62 78 94 104 120 140 158 180 195 210 245 328 370 450Coupler diameter dM 20 22 28 35 42 47 53 64 75 87 93 98 104 155 180 195Screw-in depth om 15.0 18.5 22.5 27.0 34.0 37.5 42.5 51.0 55.0 62.5 70.5 77.5 85.0 115 130 155Screw-in adjustment oj 5.0 6.5 7.5 8.0 11.0 12.5 12.5 14.0 15.0 17.5 20.0 22.5 25.0 39 45 60Suspension system Ø dsa – 10 10 10 10 10 10 10 10 12 12 12 12 12 16 16Dist. of suspension hole km – 28.0 31.0 44.5 48.0 50.5 57.5 72.0 86.5 98.5 111.5 124.5 137.0 140.0 150.0 157.5Hook spanner size – – – – – – – – – – – – – 155/8 230/10 230/10

Dimensions [mm]; Material- minimum qualities for Ø 10 - 12: Steel strength grade S235JR, for Ø 16 - 95: Steel strength grade S355J2

System diameter ds 10 12 16 20 24 27 30 36 42 48 52 56 60 76 85 95Thickness conn. plate b 8 10 15 18 20 22 25 30 35 40 45 50 55 65 75 85Hole for pin Ø j 9.5 11.5 15.5 19.5 23.5 26.5 29.5 33.5 41 47 49 53 57 76 86 96Hole position r 15 18 24 29 35 39 43 51 60 70 76 83 88 129 149 159Minimum width s 28 33 40 51 64 73 80 94 113 129 142 151 161 216 240 270

Cross coupler: Dimensions [mm]; Material specification: Steel strength grade S355J2, geomet coated

System diameter ds 16 20 24 27 30 36Coupler length LKM 142 166 200 222 242 284Coupler diameter Ø dKM 32 39 46 52 57 70Ø of cross rod dsk 16 20 24 27 30 36

DETAN ROD SYSTEM

Sys tem DETAN-S460,t ype - tes ted on bas is of the European technica l approval ETA -05/0207

The dimensions specified in the table below must be complied with. Plates are not included in the delivery scope. The specifications also refer to the Compression Rod System.

Cross bracing:

Example: Anchor disc with 4 tension rods (max. of 8 rod con-nections per disc)

Connecting plates

Couplers

ExamplesConnecting plates:

Option 1: Anchor disc, Standard K40 (minimum connecting angle αmin = 40°)

Option 2: Cross coupler(connecting angle αmin = 60°-90°)

Note: Coupler with lug as from system - Ø 12

11

System dimensions [mm]; materials: see table above

System - Ø ds 6 8 10 12 16 20 24 27 30

Fork length LDT 42 50 60 73 89 110 133 147 160

Pin length lB 18 22 28 32 42 50 58 63 70

Fork width p 12 16 21 24 33 40 46 51 57

Fork height q 17 21 26 31 41 51 61 69 75

Screw-in depth om 10.5 12.5 15.0 18.5 22.5 27.0 34.0 37.5 42.5

Screw-in adjustment oj 4.5 4.5 5.0 6.5 7.5 8.0 11.0 12.5 12.5

Length locking nut M 17.5 20.0 24.5 37.0 41.0 50.0 58.0 63.0 64.0

Tension rod assembly:spanner width ts 5 6 8 10 14 18 21 24 27

Locking nut assembly:hook spanner size Use soft touch pliers 25 - 28 30 - 32 34 - 36 40 - 42 45 - 50

Edge distance r

→ see table dimensions connecting plate page 13Pin hole diameter j

Thickness conn. plate b

System load capacities, system- and available rod length; material: stainless steel A4

System - Ø ds [mm] 6 8 10 12 16 20 24 27 30

System load capacities

Load capacity Zd[kN] 8.2 14.7 23 33.1 58.9 92 133 168 207

Available minimum system length L [mm]

polished 190 210 250 310 360 440 520 560 600

Available maximum system length with one rod [mm]

polished 3040 6050 6060 6070 6080 6100 6120 6140 6140

Available maximum rod length L [mm]

polished 3000 6000

Zd: Design load in accordance with DIN 18800 (Nov. 1990), if the partial safety values gF were used as a basis for calculations in a combination of load impacts. Partial safety value gM= 1.1 is applicable. Also see type test DETAN-E.

Larger system lengths L of several rods with couplers possible

System components – material and design

Tension rod Fork Couplers, locking nuts Pins, circlips Anchor disc

System - Ø ds [mm] 6 - 30 6 - 30 6 - 30 6 - 30 6 - 30

Material Stainless steel A4 Stainless steel A4 Â Stainless steel A4 Stainless steel A4 Stainless steel A4

Finish A4 p polished polished polished polished polished

acc. to DIN 471, material 1.4122 stainless steel A2 material 1.4401 or 1.4571, strength grade S355Â material 1.4462, strength grade S460

material 1.4401 or 1.4571, strength grade S235 material 1.4401, strength grade S460

DETAN ROD SYSTEM

Sys tem DETAN-E of s ta in less s tee l , t ype - tes ted

System length L

Fork

Note: The use of Detan-E with regard to corrosion load in the event of varying ambient environmental conditions must be verified by the planning party in each individual case.

12

d s

LM

om

+ jo - jo

k M

d s

LM

k M

dsa

d s

LM

d M

Ø j

Øf

b

Øg

Dimensions [mm], material: 1.4401 or 1.4571 (stainless steel A4), strength grade S235

System diameter ds 6 8 10 12 16 20 24 27 30

Diameter of circ.hole Ø f 55 75 90 110 140 180 210 240 260

Outer Anchor disc g 73 99 120 146 186 238 280 318 346

Dimensions [mm], material: 1.4401 or 1.4571 (stainless steel A4), strength grade S235

System diameter ds 6 8 10 12 16 20 24 27 30

Coupler length LM 34 40 40 50 62 78 94 104 120

Coupler diameter dM 12 15 20 22 28 35 42 47 53

Screw-in depth om 10.5 12.5 15.0 18.5 22.5 27.0 34.0 37.5 42.5

Screw-in adjustment oj 4.5 4.5 5.0 6.5 7.5 8.0 11.0 12.5 12.5

Suspension system Ø dsa – – – 6 6 8 8 10 10

Dist. of suspension hole km – – – 27.5 33.0 37.0 44.0 50.5 57.5

Dimensions [mm]; material: 1.4401 or 1.4571 (stainless steel A4), strength grade S235

System diameter ds 6 8 10 12 16 20 24 27 30

Thickness conn. plate b 6 8 10 12 16 20 22 25 30

Hole for pin Ø j 6.5 7.5 9.5 11.5 14.5 18.5 21.5 24.5 26.5

Hole position r 9 12 15 18 24 29 35 39 43

Minimum width s 17 21 26 31 41 51 61 69 75

DETAN ROD SYSTEM

Sys tem DETAN-E of s ta in less s tee l , t ype - tes ted

Anchor discs

Example: Anchor disc with 4 tension rods max. of 8 rod connections per disc

Connecting plates

Couplers

Standard K40 (minimum connecting angle αmin = 40°)

αmin 40°

ExamplesConnecting plates:

The dimensions specified in the table below must be complied with. Plates are not included in the delivery scope. The specifications also refer to the Compression Rod System.

13

System and standard lengths [mm]; material: steel strength grade S355

System - Ø Ds [mm] 42 54 60 76 89 114

Tube diameter 42.4 54.0 60.3 76.1 88.9 114.3

Section thickness 2.6 2.6 2.9 2.9 3.2 3.6

Available minimum system length L [mm] 1000 1000 1000 1000 1000 1000

Available maximum system length L [mm] 6340 6380 6440 6540 6610 6710

Max. system length L [mm] without reduction of load capacity Nb.R,d [KN] acc. to EC3 : selected examples

Load capacity Nb.R,d [kN]

Fork Ø ds [mm]

max. System length [mm]

26 16 2.000 3.000 3.700 5.400 7.300 11.400

43 20 1.500 2.200 2.800 4.100 5.600 8.800

61 24 1.200 1.800 2.300 3.400 4.600 7.300

84 27 800 1.400 1.900 2.800 3.900 6.200

106 30 - 1.100 1.600 2.400 3.400 5.400

160 36 - - - 1.700 2.600 4.300

223 42 - - - - 1.800 3.400

System components – material and design

System - Ø Ds [mm]

Compression rod Fork Locking nut

42 - 114 acc. statics acc. statics

Material S355J2 G20 Mn5+QT S235JR

Finishfv h.d. galvanised geomet coated geomet coated

wb mill finish geomet coated geomet coated

Four-layer coating consisting of zinc and aluminium lamella which are applied in cold immersion or injection procedures before being exposed to 300°C. The coating is free of chrome oxide and heavy metals

DETAN ROD SYSTEM

Threaded plug Seal set (fv,wb) Flat seal Round seal

Fork end Locking nut Tension rod

Fork system- Ø ds Compression Rod system- Ø Ds

System length L

Note: System DETAN-E on request. The use of Detan-E with regard to corrosion load in the event of varying ambient environmental conditions must be verified by the planning party in each individual case.

all fork and connecting plates system dimensions p. 10 + 11

All fork ends are delivered in a standard design with a threaded plug mounted to the end of the screw-in thread. Colour coded plug denotes thread direction. Yellow=right-hand thread. Blue=left-hand thread.A special seal system offers additional pro-tection. Available as standard for all sizes

Seal systems: effective protection against humidity and contamination.

For dimensioning and structural calculation of concrete system lengths and special dimensions also see: www.halfen.co.uk (

p. 9). Alternatively an inquiry with drawing, system dimensions and documentation of load capacity is possible.

Seal sys tems

as from Ø 16mm.We recommend the outer joints of the locking nuts on the construction side to be sealed applying a permanent elastic silicone which is designed for external use. Sealing with silicone in connecting couplers of sizes < M16 must be carried out.

Safety instructions and information on installation of the DETAN Rod System are available on our website: www.halfen.co.uk

Compress ion Rod Sys tem, DETAN-S355

14

Halfen Ltd

Humphrys Road, Woodside Estate

Dunstable LU5 4TP

Inquiry Order Order date:

Customer address: Delivery address:

Sales: Tel: +44 (0) 1582 470 300 Fax: +44 (0) 1582 470 304 Tel.: Fax: Mobile:

Contact: Project:

Item No. Product

System DETAN-

System- Ø System length Rod

finishSpecification

S460(S355) E

ds [mm]Ds [mm]

L [mm]

1 0 Tension Rod System X 30 34000 fv 3 Couplers

PDF with 2 order pages available on www.halfen.co.uk

Prices are understood ex works, at Dunstable, UK plus packaging and VAT Payment conditions by agreement. Our general standard contract terms and conditions apply. Signature

HALFEN is represented in more than 45 countr ies worldwide. Please contact us: www.halfen.com

CONTACT HALFEN WORLDWIDE

NOTES REGARDING THIS CATALOGUE

Technical and design changes reservedThe information in this publication is based on state-of-the-art technology at the time of publication. We reserve the right to make technical and design changes at any time. Halfen GmbH shall not accept liability for the accuracy of the information in this publication or for any printing errors.

The Quality Management System of Halfen GmbH is certified for the locations in Germany, Switzerland and Poland according to DIN EN ISO 9001:2000, Certificate No. QS-281 HH.