Upload
bhagwansingh22
View
246
Download
0
Embed Size (px)
Citation preview
7/27/2019 Device Logs LiteOn App Crash Restart
1/103
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2013.10.07 16:42:09 =~=~=~=~=~=~=~=~=~=~=~=Skipping bad block 0x03520000Skipping bad block 0x03d40000Skipping bad block 0x03da000033554432 bytes read: OKWrong Image Format for bootm commandERROR: can't get kernel image!
NAND read: device 0 offset 0x57c0000, size 0x20000131072 bytes read: OK
NAND read: device 0 offset 0x3c0000, size 0x20000131072 bytes read: OK
NAND read: device 0 offset 0x5800000, size 0x10004096 bytes read: OKProcessing Application image.
NAND read: device 0 offset 0x2400000, size 0x13e0000Skipping bad block 0x0352000020840448 bytes read: OKlength 20709376: 316 whole chunks with 0 remainderdone!Verifying Image RSA signature... OK.
Field Img Authentication passedCheck for Blob image...Processing Blob image.
NAND read: device 0 offset 0x5801000, size 0x20000131072 bytes read: OK
Verifying Image RSA signature... OK.AppImg (Blob) authenticated and copied to RAM addr : 0xbfff000
... OK to boot
## Booting kernel from Legacy Image at 08080000 ...Image Name: 15098Br13228_ENG_cavium_tms_IHSImage Type: ARM Linux Kernel Image (uncompressed)Data Size: 20622350 Bytes = 19.7 MiBLoad Address: 08080040Entry Point: 08080040XIP Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux.............................................................................................................................................
............. done, booting the kernel.mmc0: Version ID 0x5342230a.mount: mounting tmpfs on /dev/shm failed: No such file or directoryStarting logging: /etc/init.d/S01logging: line 24: start-stop-daemon: not found/etc/init.d/S01logging: line 24: start-stop-daemon: not foundOKInitializing random number generator... done.cp: can't stat '/lib/firmware/qualcomm/ar9374/v5.0.0.28/hw1.3/bdata_.bin': No such file or directorycp: can't stat '/lib/firmware/qualcomm/ar9374/v5.0.0.28/hw3.0/bdata_.bin': No su
7/27/2019 Device Logs LiteOn App Crash Restart
2/103
ch file or directoryUIBC=0WIFI_PD_GPIO is blank, setting it to 10Exporting WIFI_PD_GPIOUsing normal low-power mode.mkfifo: /cavium/wfd_rtsp_pipe: File existsath6kl: Disable firmware ext featureath6kl: wmi fail, cmd_id 0x29 ep_id 0 if_idx 0/etc/init.d/S80apprc: line 243: /cavium/parep2p: not foundcp: can't stat '': No such file or directoryrm: can't remove '': No such file or directory/etc/init.d/S80apprc: line 260: /cavium/resources/simpleGUI/splashgui.sh: not found
Trace initialized
semget: Setting up seamaphore: semget(0xd5d, 2, 1974)
main: semget: semget succeeded: semid = 32769Semaphore 3421 initialized.Semaphore 3421 initialized.OSD_COLOR_FORMAT_ARGB8888update fb0 configuration following fb2*** Init frame buffer
commandline read: simpleGUI
~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.17 |~~~~~~~~~~~~~~~~~~~~~~~~~~(c) 2001-2012 The world wide DirectFB Open Source Community(c) 2000-2004 Convergence (integrated media) GmbH
----------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2013-10-01 11:59)(*) Direct/Memcpy: Using armasm_memcpy()ash: you need to specify whom to kill(*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] ...(*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0]
...(*) DirectFB/FBDev: Found 'cncfb' (ID 255) with frame buffer at 0x0c800000, 57344k (MMIO 0xb0000000, 0k)(*) Direct/Modules: suppress module 'linux_input'ORION GFX: Using fbdev = /dev/fb2(*) DirectFB/Graphics: Celestial Semiconductor Inc. Celestialsemi Orion1.3/1.3.1/1.4 2D Gfx 0.1 (Celestial Semiconductor Inc.)(*) DirectFB/Core/WM: Default 0.3 (directfb.org)(*) FBDev/mode: SETTING 1280x720 ARGB(*) FBDev/Mode: Switched to 1280x720 (virtual 1280x720) at 32 bit (ARGB), pitch5120
*** CEC DISABLED, SETTING CAPTURE ID TO 0 ***
setting ITC bit to 0SIMPLEGUI:hdmi_cable_pluggedOriginal EDID:
Manufacturer: GSMProduct Code: 0x570d
7/27/2019 Device Logs LiteOn App Crash Restart
3/103
Serial Number: 0x00000d36Week of Mfg: 7Year of Mfg: 2009
Version: 1Revision: 3
Interface: DigitalColor Bit Depth: UndefinedInterface Std: Digital Interface Std is not defined
Horzontal: 48cm 18.48inVertical: 27cm 10.27in
Gamma: 2.20Standby: UnsupportedSuspend: Unsupported
Active Off: UnsupportedColor Type: RGB 4:4:4 & YCbCr 4:4:4
sRGB Std: is not the default color spacePreferred Mode: includes the native pixel format and preferred refresh
rateContinous Freq: Display is non-continuous frequency (multi-mode)Chromaticity R: x 0.646, y 0.333
G: x 0.302, y 0.616B: x 0.147, y 0.067W: x 0.313, y 0.329
Est Timings: 720x400p @ 70Hz
: 640x480p @ 60Hz: 640x480p @ 75Hz: 800x600p @ 60Hz: 800x600p @ 75Hz: 832x624p @ 75Hz: 1024x768p @ 60Hz: 1024x768p @ 70Hz: 1024x768p @ 75Hz: 1280x1024p @ 75Hz
Std Timings: 1280x1024p @ 60Hz: 1280x1024p @ 75Hz: 1152x864p @ 60Hz: 1680x1050p @ 60Hz
: 1280x960p @ 75Hz: 1920x1080p @ 60HzProduct Name: M227WA
Disp Range Lim: V min 56 Hz, max 75 Hz: H min 30 kHz, max 83 kHz: pixel clock max 170 MHz
Audio Formats: 2 channels of LPCM at: 32, 44.1, 48 kHz: 16, 20, 24 bits/sample
Vendor Specific: 03 0c 00 10 00 b8 2c
0: 720 x 400 p 70hz (EST) 0 01: 640 x 480 p 60hz (EST) 0 0
2: 640 x 480 p 75hz (EST) 0 03: 800 x 600 p 60hz (EST) 0 04: 800 x 600 p 75hz (EST) 0 05: 832 x 624 p 75hz (EST) 0 06: 1024 x 768 p 60hz (EST) 0 07: 1024 x 768 p 70hz (EST) 0 08: 1024 x 768 p 75hz (EST) 0 09: 1280 x 1024 p 75hz (EST) 0 010: 1280 x 1024 p 60hz (STD) 5 411: 1280 x 1024 p 75hz (STD) 5 4
7/27/2019 Device Logs LiteOn App Crash Restart
4/103
12: 1152 x 864 p 60hz (STD) 4 313: 1680 x 1050 p 60hz (STD) 16 1014: 1280 x 960 p 75hz (STD) 4 315: 1920 x 1080 p 60hz (STD) 16 916: 1920 x 1080 p 59hz*(EDID DTD) 0 017: 1680 x 1050 p 59hz (EDID DTD) 0 018: 1280 x 720 p 60hz (EXT SVD) 16 919: 1920 x 1080 i 60hz (EXT SVD) 16 920: 720 x 480 p 60hz (EXT SVD) 16 921: 720 x 480 p 60hz (EXT SVD) 4 322: 1920 x 1080 p 24hz (EXT SVD) 16 923: 1920 x 1080 p 30hz (EXT SVD) 16 924: 1920 x 1080 p 60hz (EXT SVD) 16 925: 720 x 576 p 50hz (EXT SVD) 4 326: 1280 x 720 p 50hz (EXT SVD) 16 927: 720 x 576 p 50hz (EXT SVD) 16 928: 1920 x 1080 i 50hz (EXT SVD) 16 929: 1920 x 1080 p 50hz (EXT SVD) 16 930: 720 x 480 i 60hz (EXT SVD) 16 931: 720 x 576 i 50hz (EXT SVD) 16 932: 1280 x 720 p 60hz (EXT DTD) 0 033: 1920 x 540 i 60hz (EXT DTD) 0 034: 720 x 480 p 59hz (EXT DTD) 0 035: 720 x 480 p 59hz (EXT DTD) 0 0
36: 1920 x 1080 p 60hz (EXT DTD) 0 0
Filtered EDID:
Manufacturer: GSMProduct Code: 0x570d
Serial Number: 0x00000d36Week of Mfg: 7Year of Mfg: 2009
Version: 1Revision: 3
Interface: DigitalColor Bit Depth: Undefined
Interface Std: Digital Interface Std is not definedHorzontal: 48cm 18.48inVertical: 27cm 10.27in
Gamma: 2.20Standby: UnsupportedSuspend: Unsupported
Active Off: UnsupportedColor Type: RGB 4:4:4 & YCbCr 4:4:4
sRGB Std: is not the default color spacePreferred Mode: includes the native pixel format and preferred refresh
rateContinous Freq: Display is non-continuous frequency (multi-mode)Chromaticity R: x 0.646, y 0.333
G: x 0.302, y 0.616B: x 0.147, y 0.067W: x 0.313, y 0.329
Est Timings: 640x480p @ 60Hz: 800x600p @ 60Hz: 1024x768p @ 60Hz
Std Timings: 1280x1024p @ 60Hz: 1920x1080p @ 60Hz
Product Name: M227WADisp Range Lim: V min 56 Hz, max 75 Hz
7/27/2019 Device Logs LiteOn App Crash Restart
5/103
: H min 30 kHz, max 83 kHz: pixel clock max 170 MHz
Audio Formats: 2 channels of LPCM at: 32, 44.1, 48 kHz: 16, 20, 24 bits/sample
Vendor Specific: 03 0c 00 10 00 80 2c
1: 640 x 480 p 60hz (EST) 0 03: 800 x 600 p 60hz (EST) 0 06: 1024 x 768 p 60hz (EST) 0 010: 1280 x 1024 p 60hz (STD) 5 415: 1920 x 1080 p 60hz (STD) 16 916: 1920 x 1080 p 59hz*(EDID DTD) 0 018: 1280 x 720 p 60hz (EXT SVD) 16 919: 1920 x 1080 i 60hz (EXT SVD) 16 920: 720 x 480 p 60hz (EXT SVD) 16 921: 720 x 480 p 60hz (EXT SVD) 4 322: 1920 x 1080 p 24hz (EXT SVD) 16 923: 1920 x 1080 p 30hz (EXT SVD) 16 924: 1920 x 1080 p 60hz (EXT SVD) 16 925: 720 x 576 p 50hz (EXT SVD) 4 326: 1280 x 720 p 50hz (EXT SVD) 16 927: 720 x 576 p 50hz (EXT SVD) 16 929: 1920 x 1080 p 50hz (EXT SVD) 16 9
30: 720 x 480 i 60hz (EXT SVD) 16 931: 720 x 576 i 50hz (EXT SVD) 16 932: 1280 x 720 p 60hz (EXT DTD) 0 034: 720 x 480 p 59hz (EXT DTD) 0 035: 720 x 480 p 59hz (EXT DTD) 0 036: 1920 x 1080 p 60hz (EXT DTD) 0 0
Waiting for EDID## NOTE: "TVOUT_MODE" not definedSimpleGUI:: Setting TV resolution from EDIDSimpleGUI:: Invoking CSTVOUT_SetMode(tvout0, 16) @ Line=3764SimpleGUI:: Sending TV out TV resolution change 16 to nethd_control @ Line=3562(*) Direct/Interface: Loaded 'PNG' implementation of 'IDirectFBImageProvider'.
cp: can't stat '/etc/conf/wifi/hostapd.conf': No such file or directory
Trace initializedWIFI_MGMT_EXTRA2=--dbg-level 31 --p2p-pbc-policy ask --concurrent-connect allow--concurrent-listen deny --wifi-force-reg-domain US from /mnt/jffs2/cavium/crumbs/wifi_mgmt2.cfgInside gpio_poll_buttonStarting wifi_mgmt2 : --wifi-dev qualcomm_ar9374_hw13 --sta --dbg-level 31 --p2p-pbc-policy ask --concurrent-connect allow --concurrent-listen deny --wifi-force-reg-domain USStarting Web Server## NOTE: "SHOW_IDLE_SCREEN_WHEN_DOZING" not defined
Trace initialized## NOTE: "RTCP_RR_PERIOD" not defined## NOTE: "IDR_REQ_PERIOD" not defined## NOTE: "RTPTCP" not defined
sh: bad numbersh: bad numbersh: : unknown operandDLNA=1 DLNA_P2P=0 WFD=
7/27/2019 Device Logs LiteOn App Crash Restart
6/103
Trace initialized
VERBOSE : 257
cncsec module already inserted.sec1800l_blob module already inserted.Uniq: 2 blobs found
buf_len after reducing PL and content key : 1728error : CSVID_GetSRCSequenceHeader in line 2561error : CSVID_SetOutputPostion in line 2056#
****************************************************************DMR_APP argument - SIMPLEGUI_DLNA=1DMR_APP argument - DMRONLY=1DMR_APP argument - GENERATE_UUID_FILE=0****************************************************************
Trace initialized
Trace initializedCNC_OS_TimerCreate: name=[CNC_OS_Timer].countMs=[1100].[MID] ====CNC_SYSTEM_Init Successful!====[CNC_setting-e] read data erro, Save Crc:0x00000000, Now Crc:0x86d49660[CNC_setting-e] Default data loaded OK!CSVID Version : Oct 5 2013CSAUD Version : Oct 5 2013CSAUD_Init in line 1353CSAUD_EnableDAC in line 2769CSAUD_EnableDAC in line 2769CSAUD_EnableSPDIF in line 2686OSD_COLOR_FORMAT_ARGB8888
update fb0 configuration following fb2HDMI_SEND_PID failed!simpleGUI.c :
(*) Direct/Interface: Loaded 'FT2' implementation of 'IDirectFBFont'. hdcp_verify_certificate: Verifying Device [0xAE5C66A70C] Certificate [ret=0 stat=1]
hdcp_init:semget: Setting up seamaphore: semget(0xd5d, 1, 1974)semget: semget failed: File exists
hdcp_init:semget: Setting up seamaphore: semget(0xd5d, 1, 438)Initializing Crypto H/W handleopenOutputPipe: open pipe /cavium/avdp_to_nethd_pipe_ignore error 2
CSVID Version : Oct 5 2013CSAUD Version : Oct 5 2013CSTVOUT_EnableHD2SD Handle ERROR in line 1390Disabled OSD clear in osd_display_getPipeline functionSU_FontInit TTFgfiles[i].fd = 15gfiles[i].fd: No such file or directorysh: /cavium/resources/simpleGUI/release_back.sh: not foundCSAUD_Init in line 1353sh: /cavium/resources/simpleGUI/release_back.sh: not foundgfiles[i].fd = 15
7/27/2019 Device Logs LiteOn App Crash Restart
7/103
gfiles[i].fd: No such file or directoryln: background.png: File existskillall: udhcpc: no process killedroute: SIOCDELRT: No such processgfiles[i].fd = 15gfiles[i].fd: No such file or directory
=====================================DMR Device Configuration Information:=====================================Manufacturer Name : [CAVIUM]Manufacturer URL : [www.cavium.com]Model Name : [CAVIUM Media Dongle]Model Description : [Supports DMR and Mirroring features]Model Number : [CAVIUM Media Dongle, v1.0]Model URL : [www.cavium.com/cavium_media]Serial Number : [CAVIUM_MEDIA:00001]=====================================
*************************************The UUID 24430284-1dd2-11b2-83f6-2244274cc54f*************************************
IP for interface [wlan0]: [192.168.11.6]*********************************The configured thread attributes*********************************Total Thread = 12Job and Thread Ratio = 10Total Job = 100*********************************sh: /cavium/resources/simpleGUI/release_back.sh: not found
U-Boot 2011.06-svn11677 (Sep 17 2012 - 18:10:42)
I2C: readyDRAM: 256 MiBSPI Speed at [R:23MHz/W:47MHz] Flash Size: 64KBNAND: 128 MiBMMC:initializing secure environmentBad block table found at page 65472, version 0x01Bad block table found at page 65408, version 0x01nand_read_bbt: Bad block at 0x000003520000nand_read_bbt: Bad block at 0x000003d40000nand_read_bbt: Bad block at 0x000003da0000nand_read_bbt: Bad block at 0x000004840000nand_read_bbt: Bad block at 0x0000048a0000
nand_read_bbt: Bad block at 0x000004ea0000In: serialOut: serialErr: serialMAC: 00:1a:cc:00:00:01Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x1c0000, size 0x1c20101843216 bytes read: OKmode = 5, picture_color_mode = 2
7/27/2019 Device Logs LiteOn App Crash Restart
8/103
1GFXLINEPITCHSIZE = 2560, screen_h = 7202GFXLINEPITCHSIZE = 2560, screen_h = 720tvmode = 5GFXLINEPITCHSIZE = 2560,screen_w 1280, screen_h 720,picture_color_mode 2pic_w = 1280,pic_h = 720,dst_x = 0,dst_y = 0ColorImg->LinePitch 0xa00,ColorImg->StartAddress 0xc000000,ColorImg->PixelHeight720,ColorImg->PixelWidth 1280
ColorImg->ColorFormat 2
layer_output.gfx_output[0] = 0Reg->df_gfx_control_reg.bits.iGfxEna = 1Display configurate complete!
argc=[2].argv[0]=[hdmi.bin].argv[1]=[5].main=[02056c94].in main:printf=[02056db8].in main:_start=[e92d01f0].mode=[5]MaJia ------ siiTXConfigVideoMode : In 5, Out 1, TblVal 27HDCP Authentication Begin...
----------------HDCP Release CP and Generate AN------------------------HDCP TX AN[0]=ceHDCP TX AN[1]=a8HDCP TX AN[2]=70HDCP TX AN[3]=9dHDCP TX AN[4]=57HDCP TX AN[5]=23HDCP TX AN[6]=a5HDCP TX AN[7]=38----------------HDCP Write AN to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4HDCP TX AKSV[0]=9HDCP TX AKSV[1]=71
HDCP TX AKSV[2]=d8HDCP TX AKSV[3]=b2HDCP TX AKSV[4]=ee----------------HDCP Write AKSV to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4----------------HDCP Read BKSV From RX------------------------HDCP RX BKSV[0]=70HDCP RX BKSV[1]=4eHDCP RX BKSV[2]=16HDCP RX BKSV[3]=f4HDCP RX BKSV[4]=cbHDCP wait Ri Ready--------HDCP R0RX is 5aa8,R0TX is 5aa8
-----------HDCP TX M[0]=b4HDCP TX M[1]=43HDCP TX M[2]=ddHDCP TX M[3]=a9HDCP TX M[4]=19HDCP TX M[5]=adHDCP TX M[6]=5fHDCP TX M[7]=8{DownStreamAuthState}: AuthenticatedMaJia ------ siiTXConfigVideoMode : In 2, Out 1, TblVal 0
7/27/2019 Device Logs LiteOn App Crash Restart
9/103
HDCP Authentication Begin...----------------HDCP Release CP and Generate AN------------------------HDCP TX AN[0]=89HDCP TX AN[1]=88HDCP TX AN[2]=c1HDCP TX AN[3]=60HDCP TX AN[4]=22HDCP TX AN[5]=e3HDCP TX AN[6]=efHDCP TX AN[7]=85----------------HDCP Write AN to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4HDCP TX AKSV[0]=9HDCP TX AKSV[1]=71HDCP TX AKSV[2]=d8HDCP TX AKSV[3]=b2HDCP TX AKSV[4]=ee----------------HDCP Write AKSV to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4----------------HDCP Read BKSV From RX------------------------HDCP RX BKSV[0]=70HDCP RX BKSV[1]=4eHDCP RX BKSV[2]=16HDCP RX BKSV[3]=f4
HDCP RX BKSV[4]=cbHDCP wait Ri Ready--------HDCP R0RX is 990c,R0TX is 990c-----------HDCP TX M[0]=69HDCP TX M[1]=e9HDCP TX M[2]=72HDCP TX M[3]=38HDCP TX M[4]=11HDCP TX M[5]=69HDCP TX M[6]=5bHDCP TX M[7]=f7{DownStreamAuthState}: Authenticated--------HDCP R0RX is 990c,R0TX is 990c
-----------NAND read: device 0 offset 0x2400000, size 0x2000000Skipping bad block 0x03520000Skipping bad block 0x03d40000Skipping bad block 0x03da000033554432 bytes read: OKWrong Image Format for bootm commandERROR: can't get kernel image!
NAND read: device 0 offset 0x57c0000, size 0x20000131072 bytes read: OK
NAND read: device 0 offset 0x3c0000, size 0x20000
131072 bytes read: OK
NAND read: device 0 offset 0x5800000, size 0x10004096 bytes read: OKProcessing Application image.
NAND read: device 0 offset 0x2400000, size 0x13e0000Skipping bad block 0x0352000020840448 bytes read: OKlength 20709376: 316 whole chunks with 0 remainder
7/27/2019 Device Logs LiteOn App Crash Restart
10/103
done!Verifying Image RSA signature... OK.Field Img Authentication passedCheck for Blob image...Processing Blob image.
NAND read: device 0 offset 0x5801000, size 0x20000131072 bytes read: OK
Verifying Image RSA signature... OK.AppImg (Blob) authenticated and copied to RAM addr : 0xbfff000
... OK to boot## Booting kernel from Legacy Image at 08080000 ...
Image Name: 15098Br13228_ENG_cavium_tms_IHSImage Type: ARM Linux Kernel Image (uncompressed)Data Size: 20622350 Bytes = 19.7 MiBLoad Address: 08080040Entry Point: 08080040XIP Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux.......................................................................................................................................................... done, booting the kernel.mmc0: Version ID 0x5342230a.mount: mounting tmpfs on /dev/shm failed: No such file or directoryStarting logging: /etc/init.d/S01logging: line 24: start-stop-daemon: not found/etc/init.d/S01logging: line 24: start-stop-daemon: not foundOKInitializing random number generator... done.cp: can't stat '/lib/firmware/qualcomm/ar9374/v5.0.0.28/hw1.3/bdata_.bin': No such file or directory
cp: can't stat '/lib/firmware/qualcomm/ar9374/v5.0.0.28/hw3.0/bdata_.bin': No such file or directoryUIBC=0WIFI_PD_GPIO is blank, setting it to 10Exporting WIFI_PD_GPIOUsing normal low-power mode.mkfifo: /cavium/wfd_rtsp_pipe: File existsath6kl: Disable firmware ext featureath6kl: wmi fail, cmd_id 0x29 ep_id 0 if_idx 0/etc/init.d/S80apprc: line 243: /cavium/parep2p: not foundcp: can't stat '': No such file or directoryrm: can't remove '': No such file or directory/etc/init.d/S80apprc: line 260: /cavium/resources/simpleGUI/splashgui.sh: not fo
und
Trace initialized
semget: Setting up seamaphore: semget(0xd5d, 2, 1974)
main: semget: semget succeeded: semid = 32769Semaphore 3421 initialized.Semaphore 3421 initialized.OSD_COLOR_FORMAT_ARGB8888
7/27/2019 Device Logs LiteOn App Crash Restart
11/103
update fb0 configuration following fb2*** Init frame buffercommandline read: simpleGUI
~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.17 |~~~~~~~~~~~~~~~~~~~~~~~~~~(c) 2001-2012 The world wide DirectFB Open Source Community(c) 2000-2004 Convergence (integrated media) GmbH
----------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2013-10-01 11:59)(*) Direct/Memcpy: Using libc memcpy()ash: you need to specify whom to kill(*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] ...(*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] ...(*) DirectFB/FBDev: Found 'cncfb' (ID 255) with frame buffer at 0x0c800000, 57344k (MMIO 0xb0000000, 0k)(*) Direct/Modules: suppress module 'linux_input'ORION GFX: Using fbdev = /dev/fb2(*) DirectFB/Graphics: Celestial Semiconductor Inc. Celestialsemi Orion1.3/1.3.1/1.4 2D Gfx 0.1 (Celestial Semiconductor Inc.)(*) DirectFB/Core/WM: Default 0.3 (directfb.org)(*) FBDev/mode: SETTING 1280x720 ARGB
(*) FBDev/Mode: Switched to 1280x720 (virtual 1280x720) at 32 bit (ARGB), pitch5120
*** CEC DISABLED, SETTING CAPTURE ID TO 0 ***
setting ITC bit to 0SIMPLEGUI:hdmi_cable_pluggedOriginal EDID:
Manufacturer: GSM
Product Code: 0x570dSerial Number: 0x00000d36Week of Mfg: 7Year of Mfg: 2009
Version: 1Revision: 3
Interface: DigitalColor Bit Depth: UndefinedInterface Std: Digital Interface Std is not defined
Horzontal: 48cm 18.48inVertical: 27cm 10.27in
Gamma: 2.20Standby: Unsupported
Suspend: UnsupportedActive Off: UnsupportedColor Type: RGB 4:4:4 & YCbCr 4:4:4
sRGB Std: is not the default color spacePreferred Mode: includes the native pixel format and preferred refresh
rateContinous Freq: Display is non-continuous frequency (multi-mode)Chromaticity R: x 0.646, y 0.333
G: x 0.302, y 0.616B: x 0.147, y 0.067
7/27/2019 Device Logs LiteOn App Crash Restart
12/103
W: x 0.313, y 0.329Est Timings: 720x400p @ 70Hz
: 640x480p @ 60Hz: 640x480p @ 75Hz: 800x600p @ 60Hz: 800x600p @ 75Hz: 832x624p @ 75Hz: 1024x768p @ 60Hz: 1024x768p @ 70Hz: 1024x768p @ 75Hz: 1280x1024p @ 75Hz
Std Timings: 1280x1024p @ 60Hz: 1280x1024p @ 75Hz: 1152x864p @ 60Hz: 1680x1050p @ 60Hz: 1280x960p @ 75Hz: 1920x1080p @ 60Hz
Product Name: M227WADisp Range Lim: V min 56 Hz, max 75 Hz
: H min 30 kHz, max 83 kHz: pixel clock max 170 MHz
Audio Formats: 2 channels of LPCM at: 32, 44.1, 48 kHz: 16, 20, 24 bits/sample
Vendor Specific: 03 0c 00 10 00 b8 2c
0: 720 x 400 p 70hz (EST) 0 01: 640 x 480 p 60hz (EST) 0 02: 640 x 480 p 75hz (EST) 0 03: 800 x 600 p 60hz (EST) 0 04: 800 x 600 p 75hz (EST) 0 05: 832 x 624 p 75hz (EST) 0 06: 1024 x 768 p 60hz (EST) 0 07: 1024 x 768 p 70hz (EST) 0 08: 1024 x 768 p 75hz (EST) 0 09: 1280 x 1024 p 75hz (EST) 0 010: 1280 x 1024 p 60hz (STD) 5 4
11: 1280 x 1024 p 75hz (STD) 5 412: 1152 x 864 p 60hz (STD) 4 313: 1680 x 1050 p 60hz (STD) 16 1014: 1280 x 960 p 75hz (STD) 4 315: 1920 x 1080 p 60hz (STD) 16 916: 1920 x 1080 p 59hz*(EDID DTD) 0 017: 1680 x 1050 p 59hz (EDID DTD) 0 018: 1280 x 720 p 60hz (EXT SVD) 16 919: 1920 x 1080 i 60hz (EXT SVD) 16 920: 720 x 480 p 60hz (EXT SVD) 16 921: 720 x 480 p 60hz (EXT SVD) 4 322: 1920 x 1080 p 24hz (EXT SVD) 16 923: 1920 x 1080 p 30hz (EXT SVD) 16 9
24: 1920 x 1080 p 60hz (EXT SVD) 16 925: 720 x 576 p 50hz (EXT SVD) 4 326: 1280 x 720 p 50hz (EXT SVD) 16 927: 720 x 576 p 50hz (EXT SVD) 16 928: 1920 x 1080 i 50hz (EXT SVD) 16 929: 1920 x 1080 p 50hz (EXT SVD) 16 930: 720 x 480 i 60hz (EXT SVD) 16 931: 720 x 576 i 50hz (EXT SVD) 16 932: 1280 x 720 p 60hz (EXT DTD) 0 033: 1920 x 540 i 60hz (EXT DTD) 0 0
7/27/2019 Device Logs LiteOn App Crash Restart
13/103
34: 720 x 480 p 59hz (EXT DTD) 0 035: 720 x 480 p 59hz (EXT DTD) 0 036: 1920 x 1080 p 60hz (EXT DTD) 0 0
Filtered EDID:
Manufacturer: GSMProduct Code: 0x570d
Serial Number: 0x00000d36Week of Mfg: 7Year of Mfg: 2009
Version: 1Revision: 3
Interface: DigitalColor Bit Depth: UndefinedInterface Std: Digital Interface Std is not defined
Horzontal: 48cm 18.48inVertical: 27cm 10.27in
Gamma: 2.20Standby: UnsupportedSuspend: Unsupported
Active Off: UnsupportedColor Type: RGB 4:4:4 & YCbCr 4:4:4
sRGB Std: is not the default color space
Preferred Mode: includes the native pixel format and preferred refreshrateContinous Freq: Display is non-continuous frequency (multi-mode)Chromaticity R: x 0.646, y 0.333
G: x 0.302, y 0.616B: x 0.147, y 0.067W: x 0.313, y 0.329
Est Timings: 640x480p @ 60Hz: 800x600p @ 60Hz: 1024x768p @ 60Hz
Std Timings: 1280x1024p @ 60Hz: 1920x1080p @ 60Hz
Product Name: M227WA
Disp Range Lim: V min 56 Hz, max 75 Hz: H min 30 kHz, max 83 kHz: pixel clock max 170 MHz
Audio Formats: 2 channels of LPCM at: 32, 44.1, 48 kHz: 16, 20, 24 bits/sample
Vendor Specific: 03 0c 00 10 00 80 2c
1: 640 x 480 p 60hz (EST) 0 03: 800 x 600 p 60hz (EST) 0 06: 1024 x 768 p 60hz (EST) 0 010: 1280 x 1024 p 60hz (STD) 5 415: 1920 x 1080 p 60hz (STD) 16 9
16: 1920 x 1080 p 59hz*(EDID DTD) 0 018: 1280 x 720 p 60hz (EXT SVD) 16 919: 1920 x 1080 i 60hz (EXT SVD) 16 920: 720 x 480 p 60hz (EXT SVD) 16 921: 720 x 480 p 60hz (EXT SVD) 4 322: 1920 x 1080 p 24hz (EXT SVD) 16 923: 1920 x 1080 p 30hz (EXT SVD) 16 924: 1920 x 1080 p 60hz (EXT SVD) 16 925: 720 x 576 p 50hz (EXT SVD) 4 326: 1280 x 720 p 50hz (EXT SVD) 16 9
7/27/2019 Device Logs LiteOn App Crash Restart
14/103
27: 720 x 576 p 50hz (EXT SVD) 16 929: 1920 x 1080 p 50hz (EXT SVD) 16 930: 720 x 480 i 60hz (EXT SVD) 16 931: 720 x 576 i 50hz (EXT SVD) 16 932: 1280 x 720 p 60hz (EXT DTD) 0 034: 720 x 480 p 59hz (EXT DTD) 0 035: 720 x 480 p 59hz (EXT DTD) 0 036: 1920 x 1080 p 60hz (EXT DTD) 0 0
Waiting for EDID## NOTE: "TVOUT_MODE" not definedSimpleGUI:: Setting TV resolution from EDIDSimpleGUI:: Invoking CSTVOUT_SetMode(tvout0, 16) @ Line=3764SimpleGUI:: Sending TV out TV resolution change 16 to nethd_control @ Line=3562(*) Direct/Interface: Loaded 'PNG' implementation of 'IDirectFBImageProvider'.
Trace initializedcp: can't stat '/etc/conf/wifi/hostapd.conf': No such file or directoryWIFI_MGMT_EXTRA2=--dbg-level 31 --p2p-pbc-policy ask --concurrent-connect allow--concurrent-listen deny --wifi-force-reg-domain US from /mnt/jffs2/cavium/crumbs/wifi_mgmt2.cfgInside gpio_poll_buttonStarting wifi_mgmt2 : --wifi-dev qualcomm_ar9374_hw13 --sta --dbg-level 31 --p2p-pbc-policy ask --concurrent-connect allow --concurrent-listen deny --wifi-force
-reg-domain USStarting Web Server## NOTE: "SHOW_IDLE_SCREEN_WHEN_DOZING" not defined
Trace initialized## NOTE: "RTCP_RR_PERIOD" not defined## NOTE: "IDR_REQ_PERIOD" not defined## NOTE: "RTPTCP" not defined
sh: bad numbersh: bad numbersh: : unknown operandDLNA=1 DLNA_P2P=0 WFD=
Trace initialized
VERBOSE : 257
cncsec module already inserted.sec1800l_blob module already inserted.error : CSVID_GetSRCSequenceHeader in line 2561Uniq: 2 blobs found
buf_len after reducing PL and content key : 1728error : CSVID_SetOutputPostion in line 2056
#
****************************************************************DMR_APP argument - SIMPLEGUI_DLNA=1DMR_APP argument - DMRONLY=1DMR_APP argument - GENERATE_UUID_FILE=0****************************************************************
7/27/2019 Device Logs LiteOn App Crash Restart
15/103
Trace initialized
Trace initializedCNC_OS_TimerCreate: name=[CNC_OS_Timer].countMs=[1100].[MID] ====CNC_SYSTEM_Init Successful!====[CNC_setting-e] read data erro, Save Crc:0x00000000, Now Crc:0xb5ec7cad[CNC_setting-e] Default data loaded OK!CSVID Version : Oct 5 2013CSAUD Version : Oct 5 2013CSAUD_Init in line 1353CSAUD_EnableDAC in line 2769CSAUD_EnableDAC in line 2769CSAUD_EnableSPDIF in line 2686OSD_COLOR_FORMAT_ARGB8888update fb0 configuration following fb2HDMI_SEND_PID failed!simpleGUI.c :
(*) Direct/Interface: Loaded 'FT2' implementation of 'IDirectFBFont'. hdcp_verify_certificate: Verifying Device [0xAE5C66A70C] Certificate [ret=0 stat=1]
hdcp_init:semget: Setting up seamaphore: semget(0xd5d, 1, 1974)semget: semget failed: File exists
hdcp_init:semget: Setting up seamaphore: semget(0xd5d, 1, 438)Initializing Crypto H/W handleopenOutputPipe: open pipe /cavium/avdp_to_nethd_pipe_ignore error 2CSVID Version : Oct 5 2013CSAUD Version : Oct 5 2013CSTVOUT_EnableHD2SD Handle ERROR in line 1390Disabled OSD clear in osd_display_getPipeline functionSU_FontInit TTFgfiles[i].fd = 15gfiles[i].fd: No such file or directorysh: /cavium/resources/simpleGUI/release_back.sh: not foundCSAUD_Init in line 1353sh: /cavium/resources/simpleGUI/release_back.sh: not found
gfiles[i].fd = 15gfiles[i].fd: No such file or directoryln: background.png: File existskillall: udhcpc: no process killedroute: SIOCDELRT: No such processgfiles[i].fd = 15gfiles[i].fd: No such file or directory
=====================================DMR Device Configuration Information:=====================================Manufacturer Name : [CAVIUM]
Manufacturer URL : [www.cavium.com]Model Name : [CAVIUM Media Dongle]Model Description : [Supports DMR and Mirroring features]Model Number : [CAVIUM Media Dongle, v1.0]Model URL : [www.cavium.com/cavium_media]Serial Number : [CAVIUM_MEDIA:00001]=====================================
*************************************
7/27/2019 Device Logs LiteOn App Crash Restart
16/103
The UUID 24430284-1dd2-11b2-83f6-2244274cc54f*************************************IP for interface [wlan0]: [192.168.11.6]*********************************The configured thread attributes*********************************Total Thread = 12Job and Thread Ratio = 10Total Job = 100*********************************sh: /cavium/resources/simpleGUI/release_back.sh: not found
U-Boot 2011.06-svn11677 (Sep 17 2012 - 18:10:42)
I2C: readyDRAM: 256 MiBSPI Speed at [R:23MHz/W:47MHz] Flash Size: 64KBNAND: 128 MiBMMC:initializing secure environmentBad block table found at page 65472, version 0x01Bad block table found at page 65408, version 0x01nand_read_bbt: Bad block at 0x000003520000
nand_read_bbt: Bad block at 0x000003d40000nand_read_bbt: Bad block at 0x000003da0000nand_read_bbt: Bad block at 0x000004840000nand_read_bbt: Bad block at 0x0000048a0000nand_read_bbt: Bad block at 0x000004ea0000In: serialOut: serialErr: serialMAC: 00:1a:cc:00:00:01Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x1c0000, size 0x1c20101843216 bytes read: OK
mode = 5, picture_color_mode = 21GFXLINEPITCHSIZE = 2560, screen_h = 7202GFXLINEPITCHSIZE = 2560, screen_h = 720tvmode = 5GFXLINEPITCHSIZE = 2560,screen_w 1280, screen_h 720,picture_color_mode 2pic_w = 1280,pic_h = 720,dst_x = 0,dst_y = 0ColorImg->LinePitch 0xa00,ColorImg->StartAddress 0xc000000,ColorImg->PixelHeight720,ColorImg->PixelWidth 1280
ColorImg->ColorFormat 2
layer_output.gfx_output[0] = 0Reg->df_gfx_control_reg.bits.iGfxEna = 1
Display configurate complete!
argc=[2].argv[0]=[hdmi.bin].argv[1]=[5].main=[02056c94].in main:printf=[02056db8].in main:_start=[e92d01f0].mode=[5]
7/27/2019 Device Logs LiteOn App Crash Restart
17/103
MaJia ------ siiTXConfigVideoMode : In 5, Out 1, TblVal 27HDCP Authentication Begin...----------------HDCP Release CP and Generate AN------------------------HDCP TX AN[0]=30HDCP TX AN[1]=d2HDCP TX AN[2]=cdHDCP TX AN[3]=faHDCP TX AN[4]=40HDCP TX AN[5]=24HDCP TX AN[6]=bbHDCP TX AN[7]=df----------------HDCP Write AN to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4HDCP TX AKSV[0]=9HDCP TX AKSV[1]=71HDCP TX AKSV[2]=d8HDCP TX AKSV[3]=b2HDCP TX AKSV[4]=ee----------------HDCP Write AKSV to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4----------------HDCP Read BKSV From RX------------------------HDCP RX BKSV[0]=70HDCP RX BKSV[1]=4eHDCP RX BKSV[2]=16
HDCP RX BKSV[3]=f4HDCP RX BKSV[4]=cbHDCP wait Ri Ready--------HDCP R0RX is 52f7,R0TX is 52f7-----------HDCP TX M[0]=4dHDCP TX M[1]=53HDCP TX M[2]=feHDCP TX M[3]=1cHDCP TX M[4]=3aHDCP TX M[5]=1bHDCP TX M[6]=fbHDCP TX M[7]=bc{DownStreamAuthState}: Authenticated
MaJia ------ siiTXConfigVideoMode : In 2, Out 1, TblVal 0HDCP Authentication Begin...----------------HDCP Release CP and Generate AN------------------------HDCP TX AN[0]=9cHDCP TX AN[1]=77HDCP TX AN[2]=2HDCP TX AN[3]=5bHDCP TX AN[4]=4HDCP TX AN[5]=a4HDCP TX AN[6]=abHDCP TX AN[7]=5f----------------HDCP Write AN to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4
HDCP TX AKSV[0]=9HDCP TX AKSV[1]=71HDCP TX AKSV[2]=d8HDCP TX AKSV[3]=b2HDCP TX AKSV[4]=ee----------------HDCP Write AKSV to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4----------------HDCP Read BKSV From RX------------------------HDCP RX BKSV[0]=70HDCP RX BKSV[1]=4e
7/27/2019 Device Logs LiteOn App Crash Restart
18/103
HDCP RX BKSV[2]=16HDCP RX BKSV[3]=f4HDCP RX BKSV[4]=cbHDCP wait Ri Ready--------HDCP R0RX is b9f8,R0TX is b9f8-----------HDCP TX M[0]=65HDCP TX M[1]=96HDCP TX M[2]=edHDCP TX M[3]=e2HDCP TX M[4]=aeHDCP TX M[5]=beHDCP TX M[6]=9cHDCP TX M[7]=ca{DownStreamAuthState}: Authenticated--------HDCP R0RX is b9f8,R0TX is b9f8-----------NAND read: device 0 offset 0x2400000, size 0x2000000Skipping bad block 0x03520000Skipping bad block 0x03d40000Skipping bad block 0x03da000033554432 bytes read: OKWrong Image Format for bootm commandERROR: can't get kernel image!
NAND read: device 0 offset 0x57c0000, size 0x20000131072 bytes read: OK
NAND read: device 0 offset 0x3c0000, size 0x20000131072 bytes read: OK
NAND read: device 0 offset 0x5800000, size 0x10004096 bytes read: OKProcessing Application image.
NAND read: device 0 offset 0x2400000, size 0x13e0000Skipping bad block 0x0352000020840448 bytes read: OK
length 20709376: 316 whole chunks with 0 remainderdone!Verifying Image RSA signature... OK.Field Img Authentication passedCheck for Blob image...Processing Blob image.
NAND read: device 0 offset 0x5801000, size 0x20000131072 bytes read: OK
Verifying Image RSA signature... OK.AppImg (Blob) authenticated and copied to RAM addr : 0xbfff000
... OK to boot## Booting kernel from Legacy Image at 08080000 ...
Image Name: 15098Br13228_ENG_cavium_tms_IHSImage Type: ARM Linux Kernel Image (uncompressed)Data Size: 20622350 Bytes = 19.7 MiBLoad Address: 08080040Entry Point: 08080040XIP Kernel Image ... OK
7/27/2019 Device Logs LiteOn App Crash Restart
19/103
OK
Starting kernel ...
Uncompressing Linux.......................................................................................................................................................... done, booting the kernel.mmc0: Version ID 0x5342230a.mount: mounting tmpfs on /dev/shm failed: No such file or directoryStarting logging: /etc/init.d/S01logging: line 24: start-stop-daemon: not found/etc/init.d/S01logging: line 24: start-stop-daemon: not foundOKInitializing random number generator... done.cp: can't stat '/lib/firmware/qualcomm/ar9374/v5.0.0.28/hw1.3/bdata_.bin': No such file or directorycp: can't stat '/lib/firmware/qualcomm/ar9374/v5.0.0.28/hw3.0/bdata_.bin': No such file or directoryUIBC=0WIFI_PD_GPIO is blank, setting it to 10Exporting WIFI_PD_GPIOUsing normal low-power mode.mkfifo: /cavium/wfd_rtsp_pipe: File existsath6kl: Disable firmware ext featureath6kl: wmi fail, cmd_id 0x29 ep_id 0 if_idx 0
/etc/init.d/S80apprc: line 243: /cavium/parep2p: not foundcp: can't stat '': No such file or directoryrm: can't remove '': No such file or directory/etc/init.d/S80apprc: line 260: /cavium/resources/simpleGUI/splashgui.sh: not found
Trace initialized
semget: Setting up seamaphore: semget(0xd5d, 2, 1974)
main: semget: semget succeeded: semid = 32769Semaphore 3421 initialized.Semaphore 3421 initialized.
OSD_COLOR_FORMAT_ARGB8888update fb0 configuration following fb2*** Init frame buffercommandline read: simpleGUI
~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.17 |~~~~~~~~~~~~~~~~~~~~~~~~~~(c) 2001-2012 The world wide DirectFB Open Source Community(c) 2000-2004 Convergence (integrated media) GmbH
----------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2013-10-01 11:59)ash: you need to specify whom to kill(*) Direct/Memcpy: Using libc memcpy()
(*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] ...(*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] ...(*) DirectFB/FBDev: Found 'cncfb' (ID 255) with frame buffer at 0x0c800000, 57344k (MMIO 0xb0000000, 0k)(*) Direct/Modules: suppress module 'linux_input'ORION GFX: Using fbdev = /dev/fb2(*) DirectFB/Graphics: Celestial Semiconductor Inc. Celestialsemi Orion1.3/1.3.1/1.4 2D Gfx 0.1 (Celestial Semiconductor Inc.)
7/27/2019 Device Logs LiteOn App Crash Restart
20/103
(*) DirectFB/Core/WM: Default 0.3 (directfb.org)(*) FBDev/mode: SETTING 1280x720 ARGB(*) FBDev/Mode: Switched to 1280x720 (virtual 1280x720) at 32 bit (ARGB), pitch5120
*** CEC DISABLED, SETTING CAPTURE ID TO 0 ***
setting ITC bit to 0SIMPLEGUI:hdmi_cable_pluggedOriginal EDID:
Manufacturer: GSMProduct Code: 0x570d
Serial Number: 0x00000d36Week of Mfg: 7Year of Mfg: 2009
Version: 1Revision: 3
Interface: DigitalColor Bit Depth: UndefinedInterface Std: Digital Interface Std is not defined
Horzontal: 48cm 18.48inVertical: 27cm 10.27inGamma: 2.20
Standby: UnsupportedSuspend: Unsupported
Active Off: UnsupportedColor Type: RGB 4:4:4 & YCbCr 4:4:4
sRGB Std: is not the default color spacePreferred Mode: includes the native pixel format and preferred refresh
rateContinous Freq: Display is non-continuous frequency (multi-mode)Chromaticity R: x 0.646, y 0.333
G: x 0.302, y 0.616
B: x 0.147, y 0.067W: x 0.313, y 0.329Est Timings: 720x400p @ 70Hz
: 640x480p @ 60Hz: 640x480p @ 75Hz: 800x600p @ 60Hz: 800x600p @ 75Hz: 832x624p @ 75Hz: 1024x768p @ 60Hz: 1024x768p @ 70Hz: 1024x768p @ 75Hz: 1280x1024p @ 75Hz
Std Timings: 1280x1024p @ 60Hz
: 1280x1024p @ 75Hz: 1152x864p @ 60Hz: 1680x1050p @ 60Hz: 1280x960p @ 75Hz: 1920x1080p @ 60Hz
Product Name: M227WADisp Range Lim: V min 56 Hz, max 75 Hz
: H min 30 kHz, max 83 kHz: pixel clock max 170 MHz
Audio Formats: 2 channels of LPCM at
7/27/2019 Device Logs LiteOn App Crash Restart
21/103
: 32, 44.1, 48 kHz: 16, 20, 24 bits/sample
Vendor Specific: 03 0c 00 10 00 b8 2c
0: 720 x 400 p 70hz (EST) 0 01: 640 x 480 p 60hz (EST) 0 02: 640 x 480 p 75hz (EST) 0 03: 800 x 600 p 60hz (EST) 0 04: 800 x 600 p 75hz (EST) 0 05: 832 x 624 p 75hz (EST) 0 06: 1024 x 768 p 60hz (EST) 0 07: 1024 x 768 p 70hz (EST) 0 08: 1024 x 768 p 75hz (EST) 0 09: 1280 x 1024 p 75hz (EST) 0 010: 1280 x 1024 p 60hz (STD) 5 411: 1280 x 1024 p 75hz (STD) 5 412: 1152 x 864 p 60hz (STD) 4 313: 1680 x 1050 p 60hz (STD) 16 1014: 1280 x 960 p 75hz (STD) 4 315: 1920 x 1080 p 60hz (STD) 16 916: 1920 x 1080 p 59hz*(EDID DTD) 0 017: 1680 x 1050 p 59hz (EDID DTD) 0 018: 1280 x 720 p 60hz (EXT SVD) 16 919: 1920 x 1080 i 60hz (EXT SVD) 16 9
20: 720 x 480 p 60hz (EXT SVD) 16 921: 720 x 480 p 60hz (EXT SVD) 4 322: 1920 x 1080 p 24hz (EXT SVD) 16 923: 1920 x 1080 p 30hz (EXT SVD) 16 924: 1920 x 1080 p 60hz (EXT SVD) 16 925: 720 x 576 p 50hz (EXT SVD) 4 326: 1280 x 720 p 50hz (EXT SVD) 16 927: 720 x 576 p 50hz (EXT SVD) 16 928: 1920 x 1080 i 50hz (EXT SVD) 16 929: 1920 x 1080 p 50hz (EXT SVD) 16 930: 720 x 480 i 60hz (EXT SVD) 16 931: 720 x 576 i 50hz (EXT SVD) 16 932: 1280 x 720 p 60hz (EXT DTD) 0 0
33: 1920 x 540 i 60hz (EXT DTD) 0 034: 720 x 480 p 59hz (EXT DTD) 0 035: 720 x 480 p 59hz (EXT DTD) 0 036: 1920 x 1080 p 60hz (EXT DTD) 0 0
Filtered EDID:
Manufacturer: GSMProduct Code: 0x570d
Serial Number: 0x00000d36Week of Mfg: 7Year of Mfg: 2009
Version: 1
Revision: 3Interface: Digital
Color Bit Depth: UndefinedInterface Std: Digital Interface Std is not defined
Horzontal: 48cm 18.48inVertical: 27cm 10.27in
Gamma: 2.20Standby: UnsupportedSuspend: Unsupported
Active Off: Unsupported
7/27/2019 Device Logs LiteOn App Crash Restart
22/103
Color Type: RGB 4:4:4 & YCbCr 4:4:4sRGB Std: is not the default color space
Preferred Mode: includes the native pixel format and preferred refreshrate
Continous Freq: Display is non-continuous frequency (multi-mode)Chromaticity R: x 0.646, y 0.333
G: x 0.302, y 0.616B: x 0.147, y 0.067W: x 0.313, y 0.329
Est Timings: 640x480p @ 60Hz: 800x600p @ 60Hz: 1024x768p @ 60Hz
Std Timings: 1280x1024p @ 60Hz: 1920x1080p @ 60Hz
Product Name: M227WADisp Range Lim: V min 56 Hz, max 75 Hz
: H min 30 kHz, max 83 kHz: pixel clock max 170 MHz
Audio Formats: 2 channels of LPCM at: 32, 44.1, 48 kHz: 16, 20, 24 bits/sample
Vendor Specific: 03 0c 00 10 00 80 2c
1: 640 x 480 p 60hz (EST) 0 0
3: 800 x 600 p 60hz (EST) 0 06: 1024 x 768 p 60hz (EST) 0 010: 1280 x 1024 p 60hz (STD) 5 415: 1920 x 1080 p 60hz (STD) 16 916: 1920 x 1080 p 59hz*(EDID DTD) 0 018: 1280 x 720 p 60hz (EXT SVD) 16 919: 1920 x 1080 i 60hz (EXT SVD) 16 920: 720 x 480 p 60hz (EXT SVD) 16 921: 720 x 480 p 60hz (EXT SVD) 4 322: 1920 x 1080 p 24hz (EXT SVD) 16 923: 1920 x 1080 p 30hz (EXT SVD) 16 924: 1920 x 1080 p 60hz (EXT SVD) 16 925: 720 x 576 p 50hz (EXT SVD) 4 3
26: 1280 x 720 p 50hz (EXT SVD) 16 927: 720 x 576 p 50hz (EXT SVD) 16 929: 1920 x 1080 p 50hz (EXT SVD) 16 930: 720 x 480 i 60hz (EXT SVD) 16 931: 720 x 576 i 50hz (EXT SVD) 16 932: 1280 x 720 p 60hz (EXT DTD) 0 034: 720 x 480 p 59hz (EXT DTD) 0 035: 720 x 480 p 59hz (EXT DTD) 0 036: 1920 x 1080 p 60hz (EXT DTD) 0 0
Waiting for EDID## NOTE: "TVOUT_MODE" not definedSimpleGUI:: Setting TV resolution from EDID
SimpleGUI:: Invoking CSTVOUT_SetMode(tvout0, 16) @ Line=3764SimpleGUI:: Sending TV out TV resolution change 16 to nethd_control @ Line=3562(*) Direct/Interface: Loaded 'PNG' implementation of 'IDirectFBImageProvider'.cp: can't stat '/etc/conf/wifi/hostapd.conf': No such file or directory
Trace initializedWIFI_MGMT_EXTRA2=--dbg-level 31 --p2p-pbc-policy ask --concurrent-connect allow--concurrent-listen deny --wifi-force-reg-domain US from /mnt/jffs2/cavium/crumbs/wifi_mgmt2.cfgInside gpio_poll_button
7/27/2019 Device Logs LiteOn App Crash Restart
23/103
## NOTE: "SHOW_IDLE_SCREEN_WHEN_DOZING" not definedStarting wifi_mgmt2 : --wifi-dev qualcomm_ar9374_hw13 --sta --dbg-level 31 --p2p-pbc-policy ask --concurrent-connect allow --concurrent-listen deny --wifi-force-reg-domain USStarting Web Server## NOTE: "RTCP_RR_PERIOD" not defined
Trace initialized## NOTE: "IDR_REQ_PERIOD" not defined## NOTE: "RTPTCP" not defined
sh: bad numbersh: bad numbersh: : unknown operandDLNA=1 DLNA_P2P=0 WFD=
Trace initialized
VERBOSE : 257
cncsec module already inserted.sec1800l_blob module already inserted.Uniq: 2 blobs found
buf_len after reducing PL and content key : 1728error : CSVID_GetSRCSequenceHeader in line 2561error : CSVID_SetOutputPostion in line 2056#
****************************************************************DMR_APP argument - SIMPLEGUI_DLNA=1DMR_APP argument - DMRONLY=1DMR_APP argument - GENERATE_UUID_FILE=0****************************************************************
Trace initialized
Trace initializedCNC_OS_TimerCreate: name=[CNC_OS_Timer].countMs=[1100].[MID] ====CNC_SYSTEM_Init Successful!====[CNC_setting-e] read data erro, Save Crc:0x00000000, Now Crc:0x74dfed28[CNC_setting-e] Default data loaded OK!CSVID Version : Oct 5 2013CSAUD Version : Oct 5 2013CSAUD_Init in line 1353CSAUD_EnableDAC in line 2769
CSAUD_EnableDAC in line 2769CSAUD_EnableSPDIF in line 2686OSD_COLOR_FORMAT_ARGB8888update fb0 configuration following fb2HDMI_SEND_PID failed!simpleGUI.c :
hdcp_verify_certificate: Verifying Device [0xAE5C66A70C] Certificate [ret=0 stat=1](*) Direct/Interface: Loaded 'FT2' implementation of 'IDirectFBFont'.
7/27/2019 Device Logs LiteOn App Crash Restart
24/103
hdcp_init:semget: Setting up seamaphore: semget(0xd5d, 1, 1974)semget: semget failed: File exists
hdcp_init:semget: Setting up seamaphore: semget(0xd5d, 1, 438)Initializing Crypto H/W handleopenOutputPipe: open pipe /cavium/avdp_to_nethd_pipe_ignore error 2CSVID Version : Oct 5 2013CSAUD Version : Oct 5 2013CSTVOUT_EnableHD2SD Handle ERROR in line 1390Disabled OSD clear in osd_display_getPipeline functionSU_FontInit TTFgfiles[i].fd = 15gfiles[i].fd: No such file or directorysh: /cavium/resources/simpleGUI/release_back.sh: not foundCSAUD_Init in line 1353sh: /cavium/resources/simpleGUI/release_back.sh: not foundgfiles[i].fd = 15gfiles[i].fd: No such file or directoryln: background.png: File existskillall: udhcpc: no process killedroute: SIOCDELRT: No such processgfiles[i].fd = 15gfiles[i].fd: No such file or directory
=====================================DMR Device Configuration Information:=====================================Manufacturer Name : [CAVIUM]Manufacturer URL : [www.cavium.com]Model Name : [CAVIUM Media Dongle]Model Description : [Supports DMR and Mirroring features]Model Number : [CAVIUM Media Dongle, v1.0]Model URL : [www.cavium.com/cavium_media]Serial Number : [CAVIUM_MEDIA:00001]=====================================
*************************************The UUID 24430284-1dd2-11b2-83f6-2244274cc54f*************************************IP for interface [wlan0]: [192.168.11.6]*********************************The configured thread attributes*********************************Total Thread = 12Job and Thread Ratio = 10Total Job = 100*********************************sh: /cavium/resources/simpleGUI/release_back.sh: not found
U-Boot 2011.06-svn11677 (Sep 17 2012 - 18:10:42)
I2C: readyDRAM: 256 MiBSPI Speed at [R:23MHz/W:47MHz] Flash Size: 64KBNAND: 128 MiBMMC:initializing secure environmentBad block table found at page 65472, version 0x01
7/27/2019 Device Logs LiteOn App Crash Restart
25/103
Bad block table found at page 65408, version 0x01nand_read_bbt: Bad block at 0x000003520000nand_read_bbt: Bad block at 0x000003d40000nand_read_bbt: Bad block at 0x000003da0000nand_read_bbt: Bad block at 0x000004840000nand_read_bbt: Bad block at 0x0000048a0000nand_read_bbt: Bad block at 0x000004ea0000In: serialOut: serialErr: serialMAC: 00:1a:cc:00:00:01Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x1c0000, size 0x1c20101843216 bytes read: OKmode = 5, picture_color_mode = 21GFXLINEPITCHSIZE = 2560, screen_h = 7202GFXLINEPITCHSIZE = 2560, screen_h = 720tvmode = 5GFXLINEPITCHSIZE = 2560,screen_w 1280, screen_h 720,picture_color_mode 2pic_w = 1280,pic_h = 720,dst_x = 0,dst_y = 0ColorImg->LinePitch 0xa00,ColorImg->StartAddress 0xc000000,ColorImg->PixelHeight720,ColorImg->PixelWidth 1280
ColorImg->ColorFormat 2
layer_output.gfx_output[0] = 0Reg->df_gfx_control_reg.bits.iGfxEna = 1Display configurate complete!
argc=[2].argv[0]=[hdmi.bin].argv[1]=[5].main=[02056c94].in main:printf=[02056db8].in main:_start=[e92d01f0].
mode=[5]MaJia ------ siiTXConfigVideoMode : In 5, Out 1, TblVal 27HDCP Authentication Begin...----------------HDCP Release CP and Generate AN------------------------HDCP TX AN[0]=8aHDCP TX AN[1]=20HDCP TX AN[2]=d7HDCP TX AN[3]=f8HDCP TX AN[4]=a8HDCP TX AN[5]=a4HDCP TX AN[6]=64HDCP TX AN[7]=32----------------HDCP Write AN to RX------------------------
~~~~~~~~~~~~~~~~~~MDDC Write status=4HDCP TX AKSV[0]=9HDCP TX AKSV[1]=71HDCP TX AKSV[2]=d8HDCP TX AKSV[3]=b2HDCP TX AKSV[4]=ee----------------HDCP Write AKSV to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4----------------HDCP Read BKSV From RX------------------------HDCP RX BKSV[0]=70
7/27/2019 Device Logs LiteOn App Crash Restart
26/103
HDCP RX BKSV[1]=4eHDCP RX BKSV[2]=16HDCP RX BKSV[3]=f4HDCP RX BKSV[4]=cbHDCP wait Ri Ready--------HDCP R0RX is a5c6,R0TX is a5c6-----------HDCP TX M[0]=c2HDCP TX M[1]=b2HDCP TX M[2]=efHDCP TX M[3]=ecHDCP TX M[4]=56HDCP TX M[5]=62HDCP TX M[6]=45HDCP TX M[7]=fd{DownStreamAuthState}: AuthenticatedMaJia ------ siiTXConfigVideoMode : In 2, Out 1, TblVal 0HDCP Authentication Begin...----------------HDCP Release CP and Generate AN------------------------HDCP TX AN[0]=faHDCP TX AN[1]=d7HDCP TX AN[2]=26HDCP TX AN[3]=61HDCP TX AN[4]=94HDCP TX AN[5]=f2
HDCP TX AN[6]=f0HDCP TX AN[7]=44----------------HDCP Write AN to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4HDCP TX AKSV[0]=9HDCP TX AKSV[1]=71HDCP TX AKSV[2]=d8HDCP TX AKSV[3]=b2HDCP TX AKSV[4]=ee----------------HDCP Write AKSV to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4----------------HDCP Read BKSV From RX------------------------HDCP RX BKSV[0]=70
HDCP RX BKSV[1]=4eHDCP RX BKSV[2]=16HDCP RX BKSV[3]=f4HDCP RX BKSV[4]=cbHDCP wait Ri Ready--------HDCP R0RX is 6394,R0TX is 6394-----------HDCP TX M[0]=e6HDCP TX M[1]=87HDCP TX M[2]=a9HDCP TX M[3]=54HDCP TX M[4]=6cHDCP TX M[5]=87HDCP TX M[6]=6e
HDCP TX M[7]=e7{DownStreamAuthState}: Authenticated--------HDCP R0RX is 6394,R0TX is 6394-----------NAND read: device 0 offset 0x2400000, size 0x2000000Skipping bad block 0x03520000Skipping bad block 0x03d40000Skipping bad block 0x03da000033554432 bytes read: OKWrong Image Format for bootm command
7/27/2019 Device Logs LiteOn App Crash Restart
27/103
ERROR: can't get kernel image!
NAND read: device 0 offset 0x57c0000, size 0x20000131072 bytes read: OK
NAND read: device 0 offset 0x3c0000, size 0x20000131072 bytes read: OK
NAND read: device 0 offset 0x5800000, size 0x10004096 bytes read: OKProcessing Application image.
NAND read: device 0 offset 0x2400000, size 0x13e0000Skipping bad block 0x0352000020840448 bytes read: OKlength 20709376: 316 whole chunks with 0 remainderdone!Verifying Image RSA signature... OK.Field Img Authentication passedCheck for Blob image...Processing Blob image.
NAND read: device 0 offset 0x5801000, size 0x20000131072 bytes read: OK
Verifying Image RSA signature... OK.AppImg (Blob) authenticated and copied to RAM addr : 0xbfff000
... OK to boot## Booting kernel from Legacy Image at 08080000 ...
Image Name: 15098Br13228_ENG_cavium_tms_IHSImage Type: ARM Linux Kernel Image (uncompressed)Data Size: 20622350 Bytes = 19.7 MiBLoad Address: 08080040Entry Point: 08080040
XIP Kernel Image ... OKOK
Starting kernel ...
Uncompressing Linux.......................................................................................................................................................... done, booting the kernel.mmc0: Version ID 0x5342230a.mount: mounting tmpfs on /dev/shm failed: No such file or directoryStarting logging: /etc/init.d/S01logging: line 24: start-stop-daemon: not found/etc/init.d/S01logging: line 24: start-stop-daemon: not foundOK
Initializing random number generator... done.cp: can't stat '/lib/firmware/qualcomm/ar9374/v5.0.0.28/hw1.3/bdata_.bin': No such file or directorycp: can't stat '/lib/firmware/qualcomm/ar9374/v5.0.0.28/hw3.0/bdata_.bin': No such file or directoryUIBC=0WIFI_PD_GPIO is blank, setting it to 10Exporting WIFI_PD_GPIOUsing normal low-power mode.mkfifo: /cavium/wfd_rtsp_pipe: File exists
7/27/2019 Device Logs LiteOn App Crash Restart
28/103
ath6kl: Disable firmware ext featureath6kl: wmi fail, cmd_id 0x29 ep_id 0 if_idx 0/etc/init.d/S80apprc: line 243: /cavium/parep2p: not foundcp: can't stat '': No such file or directoryrm: can't remove '': No such file or directory/etc/init.d/S80apprc: line 260: /cavium/resources/simpleGUI/splashgui.sh: not found
Trace initialized
semget: Setting up seamaphore: semget(0xd5d, 2, 1974)
main: semget: semget succeeded: semid = 32769Semaphore 3421 initialized.Semaphore 3421 initialized.OSD_COLOR_FORMAT_ARGB8888update fb0 configuration following fb2*** Init frame buffercommandline read: simpleGUI
~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.17 |~~~~~~~~~~~~~~~~~~~~~~~~~~(c) 2001-2012 The world wide DirectFB Open Source Community(c) 2000-2004 Convergence (integrated media) GmbH
----------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2013-10-01 11:59)ash: you need to specify whom to kill(*) Direct/Memcpy: Using libc memcpy()(*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] ...(*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] ...(*) DirectFB/FBDev: Found 'cncfb' (ID 255) with frame buffer at 0x0c800000, 57344k (MMIO 0xb0000000, 0k)(*) Direct/Modules: suppress module 'linux_input'ORION GFX: Using fbdev = /dev/fb2(*) DirectFB/Graphics: Celestial Semiconductor Inc. Celestialsemi Orion1.3/1.3.1
/1.4 2D Gfx 0.1 (Celestial Semiconductor Inc.)(*) DirectFB/Core/WM: Default 0.3 (directfb.org)(*) FBDev/mode: SETTING 1280x720 ARGB(*) FBDev/Mode: Switched to 1280x720 (virtual 1280x720) at 32 bit (ARGB), pitch5120
*** CEC DISABLED, SETTING CAPTURE ID TO 0 ***
setting ITC bit to 0SIMPLEGUI:hdmi_cable_plugged
Original EDID:
Manufacturer: GSMProduct Code: 0x570d
Serial Number: 0x00000d36Week of Mfg: 7Year of Mfg: 2009
Version: 1Revision: 3
Interface: Digital
7/27/2019 Device Logs LiteOn App Crash Restart
29/103
Color Bit Depth: UndefinedInterface Std: Digital Interface Std is not defined
Horzontal: 48cm 18.48inVertical: 27cm 10.27in
Gamma: 2.20Standby: UnsupportedSuspend: Unsupported
Active Off: UnsupportedColor Type: RGB 4:4:4 & YCbCr 4:4:4
sRGB Std: is not the default color spacePreferred Mode: includes the native pixel format and preferred refresh
rateContinous Freq: Display is non-continuous frequency (multi-mode)Chromaticity R: x 0.646, y 0.333
G: x 0.302, y 0.616B: x 0.147, y 0.067W: x 0.313, y 0.329
Est Timings: 720x400p @ 70Hz: 640x480p @ 60Hz: 640x480p @ 75Hz: 800x600p @ 60Hz: 800x600p @ 75Hz: 832x624p @ 75Hz: 1024x768p @ 60Hz
: 1024x768p @ 70Hz: 1024x768p @ 75Hz: 1280x1024p @ 75Hz
Std Timings: 1280x1024p @ 60Hz: 1280x1024p @ 75Hz: 1152x864p @ 60Hz: 1680x1050p @ 60Hz: 1280x960p @ 75Hz: 1920x1080p @ 60Hz
Product Name: M227WADisp Range Lim: V min 56 Hz, max 75 Hz
: H min 30 kHz, max 83 kHz: pixel clock max 170 MHz
Audio Formats: 2 channels of LPCM at: 32, 44.1, 48 kHz: 16, 20, 24 bits/sample
Vendor Specific: 03 0c 00 10 00 b8 2c
0: 720 x 400 p 70hz (EST) 0 01: 640 x 480 p 60hz (EST) 0 02: 640 x 480 p 75hz (EST) 0 03: 800 x 600 p 60hz (EST) 0 04: 800 x 600 p 75hz (EST) 0 05: 832 x 624 p 75hz (EST) 0 06: 1024 x 768 p 60hz (EST) 0 07: 1024 x 768 p 70hz (EST) 0 0
8: 1024 x 768 p 75hz (EST) 0 09: 1280 x 1024 p 75hz (EST) 0 010: 1280 x 1024 p 60hz (STD) 5 411: 1280 x 1024 p 75hz (STD) 5 412: 1152 x 864 p 60hz (STD) 4 313: 1680 x 1050 p 60hz (STD) 16 1014: 1280 x 960 p 75hz (STD) 4 315: 1920 x 1080 p 60hz (STD) 16 916: 1920 x 1080 p 59hz*(EDID DTD) 0 017: 1680 x 1050 p 59hz (EDID DTD) 0 0
7/27/2019 Device Logs LiteOn App Crash Restart
30/103
18: 1280 x 720 p 60hz (EXT SVD) 16 919: 1920 x 1080 i 60hz (EXT SVD) 16 920: 720 x 480 p 60hz (EXT SVD) 16 921: 720 x 480 p 60hz (EXT SVD) 4 322: 1920 x 1080 p 24hz (EXT SVD) 16 923: 1920 x 1080 p 30hz (EXT SVD) 16 924: 1920 x 1080 p 60hz (EXT SVD) 16 925: 720 x 576 p 50hz (EXT SVD) 4 326: 1280 x 720 p 50hz (EXT SVD) 16 927: 720 x 576 p 50hz (EXT SVD) 16 928: 1920 x 1080 i 50hz (EXT SVD) 16 929: 1920 x 1080 p 50hz (EXT SVD) 16 930: 720 x 480 i 60hz (EXT SVD) 16 931: 720 x 576 i 50hz (EXT SVD) 16 932: 1280 x 720 p 60hz (EXT DTD) 0 033: 1920 x 540 i 60hz (EXT DTD) 0 034: 720 x 480 p 59hz (EXT DTD) 0 035: 720 x 480 p 59hz (EXT DTD) 0 036: 1920 x 1080 p 60hz (EXT DTD) 0 0
Filtered EDID:
Manufacturer: GSMProduct Code: 0x570d
Serial Number: 0x00000d36Week of Mfg: 7Year of Mfg: 2009
Version: 1Revision: 3
Interface: DigitalColor Bit Depth: UndefinedInterface Std: Digital Interface Std is not defined
Horzontal: 48cm 18.48inVertical: 27cm 10.27in
Gamma: 2.20Standby: UnsupportedSuspend: Unsupported
Active Off: UnsupportedColor Type: RGB 4:4:4 & YCbCr 4:4:4sRGB Std: is not the default color space
Preferred Mode: includes the native pixel format and preferred refreshrate
Continous Freq: Display is non-continuous frequency (multi-mode)Chromaticity R: x 0.646, y 0.333
G: x 0.302, y 0.616B: x 0.147, y 0.067W: x 0.313, y 0.329
Est Timings: 640x480p @ 60Hz: 800x600p @ 60Hz: 1024x768p @ 60Hz
Std Timings: 1280x1024p @ 60Hz: 1920x1080p @ 60Hz
Product Name: M227WADisp Range Lim: V min 56 Hz, max 75 Hz
: H min 30 kHz, max 83 kHz: pixel clock max 170 MHz
Audio Formats: 2 channels of LPCM at: 32, 44.1, 48 kHz: 16, 20, 24 bits/sample
Vendor Specific: 03 0c 00 10 00 80 2c
7/27/2019 Device Logs LiteOn App Crash Restart
31/103
1: 640 x 480 p 60hz (EST) 0 03: 800 x 600 p 60hz (EST) 0 06: 1024 x 768 p 60hz (EST) 0 010: 1280 x 1024 p 60hz (STD) 5 415: 1920 x 1080 p 60hz (STD) 16 916: 1920 x 1080 p 59hz*(EDID DTD) 0 018: 1280 x 720 p 60hz (EXT SVD) 16 919: 1920 x 1080 i 60hz (EXT SVD) 16 920: 720 x 480 p 60hz (EXT SVD) 16 921: 720 x 480 p 60hz (EXT SVD) 4 322: 1920 x 1080 p 24hz (EXT SVD) 16 923: 1920 x 1080 p 30hz (EXT SVD) 16 924: 1920 x 1080 p 60hz (EXT SVD) 16 925: 720 x 576 p 50hz (EXT SVD) 4 326: 1280 x 720 p 50hz (EXT SVD) 16 927: 720 x 576 p 50hz (EXT SVD) 16 929: 1920 x 1080 p 50hz (EXT SVD) 16 930: 720 x 480 i 60hz (EXT SVD) 16 931: 720 x 576 i 50hz (EXT SVD) 16 932: 1280 x 720 p 60hz (EXT DTD) 0 034: 720 x 480 p 59hz (EXT DTD) 0 035: 720 x 480 p 59hz (EXT DTD) 0 036: 1920 x 1080 p 60hz (EXT DTD) 0 0
Waiting for EDID## NOTE: "TVOUT_MODE" not definedSimpleGUI:: Setting TV resolution from EDIDSimpleGUI:: Invoking CSTVOUT_SetMode(tvout0, 16) @ Line=3764SimpleGUI:: Sending TV out TV resolution change 16 to nethd_control @ Line=3562(*) Direct/Interface: Loaded 'PNG' implementation of 'IDirectFBImageProvider'.cp: can't stat '/etc/conf/wifi/hostapd.conf': No such file or directory
Trace initializedWIFI_MGMT_EXTRA2=--dbg-level 31 --p2p-pbc-policy ask --concurrent-connect allow--concurrent-listen deny --wifi-force-reg-domain US from /mnt/jffs2/cavium/crumbs/wifi_mgmt2.cfg
Inside gpio_poll_buttonStarting wifi_mgmt2 : --wifi-dev qualcomm_ar9374_hw13 --sta --dbg-level 31 --p2p-pbc-policy ask --concurrent-connect allow --concurrent-listen deny --wifi-force-reg-domain USStarting Web Server## NOTE: "SHOW_IDLE_SCREEN_WHEN_DOZING" not defined## NOTE: "RTCP_RR_PERIOD" not defined
Trace initialized## NOTE: "IDR_REQ_PERIOD" not defined## NOTE: "RTPTCP" not defined
sh: bad number
sh: bad numbersh: : unknown operandDLNA=1 DLNA_P2P=0 WFD=
Trace initialized
VERBOSE : 257
cncsec module already inserted.
7/27/2019 Device Logs LiteOn App Crash Restart
32/103
sec1800l_blob module already inserted.error : CSVID_GetSRCSequenceHeader in line 2561Uniq: 2 blobs found
buf_len after reducing PL and content key : 1728error : CSVID_SetOutputPostion in line 2056#
****************************************************************DMR_APP argument - SIMPLEGUI_DLNA=1DMR_APP argument - DMRONLY=1DMR_APP argument - GENERATE_UUID_FILE=0****************************************************************
Trace initialized
Trace initializedCNC_OS_TimerCreate: name=[CNC_OS_Timer].countMs=[1100].[MID] ====CNC_SYSTEM_Init Successful!====[CNC_setting-e] read data erro, Save Crc:0x00000000, Now Crc:0xcb1bbf95[CNC_setting-e] Default data loaded OK!
CSVID Version : Oct 5 2013CSAUD Version : Oct 5 2013CSAUD_Init in line 1353CSAUD_EnableDAC in line 2769CSAUD_EnableDAC in line 2769CSAUD_EnableSPDIF in line 2686OSD_COLOR_FORMAT_ARGB8888update fb0 configuration following fb2HDMI_SEND_PID failed!simpleGUI.c :
hdcp_verify_certificate: Verifying Device [0xAE5C66A70C] Certificate [ret=0 stat=1](*) Direct/Interface: Loaded 'FT2' implementation of 'IDirectFBFont'.
hdcp_init:semget: Setting up seamaphore: semget(0xd5d, 1, 1974)semget: semget failed: File exists
hdcp_init:semget: Setting up seamaphore: semget(0xd5d, 1, 438)Initializing Crypto H/W handleopenOutputPipe: open pipe /cavium/avdp_to_nethd_pipe_ignore error 2CSVID Version : Oct 5 2013CSAUD Version : Oct 5 2013CSTVOUT_EnableHD2SD Handle ERROR in line 1390Disabled OSD clear in osd_display_getPipeline functionSU_FontInit TTFgfiles[i].fd = 15gfiles[i].fd: No such file or directory
sh: /cavium/resources/simpleGUI/release_back.sh: not foundCSAUD_Init in line 1353sh: /cavium/resources/simpleGUI/release_back.sh: not foundgfiles[i].fd = 15gfiles[i].fd: No such file or directoryln: background.png: File existskillall: udhcpc: no process killedroute: SIOCDELRT: No such processgfiles[i].fd = 15gfiles[i].fd: No such file or directory
7/27/2019 Device Logs LiteOn App Crash Restart
33/103
=====================================DMR Device Configuration Information:=====================================Manufacturer Name : [CAVIUM]Manufacturer URL : [www.cavium.com]Model Name : [CAVIUM Media Dongle]Model Description : [Supports DMR and Mirroring features]Model Number : [CAVIUM Media Dongle, v1.0]Model URL : [www.cavium.com/cavium_media]Serial Number : [CAVIUM_MEDIA:00001]=====================================
*************************************The UUID 24430284-1dd2-11b2-83f6-2244274cc54f*************************************IP for interface [wlan0]: [192.168.11.6]*********************************The configured thread attributes*********************************Total Thread = 12Job and Thread Ratio = 10
Total Job = 100*********************************sh: /cavium/resources/simpleGUI/release_back.sh: not found
U-Boot 2011.06-svn11677 (Sep 17 2012 - 18:10:42)
I2C: readyDRAM: 256 MiBSPI Speed at [R:23MHz/W:47MHz] Flash Size: 64KBNAND: 128 MiBMMC:initializing secure environment
Bad block table found at page 65472, version 0x01Bad block table found at page 65408, version 0x01nand_read_bbt: Bad block at 0x000003520000nand_read_bbt: Bad block at 0x000003d40000nand_read_bbt: Bad block at 0x000003da0000nand_read_bbt: Bad block at 0x000004840000nand_read_bbt: Bad block at 0x0000048a0000nand_read_bbt: Bad block at 0x000004ea0000In: serialOut: serialErr: serialMAC: 00:1a:cc:00:00:01Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x1c0000, size 0x1c20101843216 bytes read: OKmode = 5, picture_color_mode = 21GFXLINEPITCHSIZE = 2560, screen_h = 7202GFXLINEPITCHSIZE = 2560, screen_h = 720tvmode = 5GFXLINEPITCHSIZE = 2560,screen_w 1280, screen_h 720,picture_color_mode 2pic_w = 1280,pic_h = 720,dst_x = 0,dst_y = 0ColorImg->LinePitch 0xa00,ColorImg->StartAddress 0xc000000,ColorImg->PixelHeight
7/27/2019 Device Logs LiteOn App Crash Restart
34/103
720,ColorImg->PixelWidth 1280
ColorImg->ColorFormat 2
layer_output.gfx_output[0] = 0Reg->df_gfx_control_reg.bits.iGfxEna = 1Display configurate complete!
argc=[2].argv[0]=[hdmi.bin].argv[1]=[5].main=[02056c94].in main:printf=[02056db8].in main:_start=[e92d01f0].mode=[5]MaJia ------ siiTXConfigVideoMode : In 5, Out 1, TblVal 27HDCP Authentication Begin...----------------HDCP Release CP and Generate AN------------------------HDCP TX AN[0]=b4HDCP TX AN[1]=38HDCP TX AN[2]=64HDCP TX AN[3]=92HDCP TX AN[4]=c5
HDCP TX AN[5]=96HDCP TX AN[6]=26HDCP TX AN[7]=32----------------HDCP Write AN to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4HDCP TX AKSV[0]=9HDCP TX AKSV[1]=71HDCP TX AKSV[2]=d8HDCP TX AKSV[3]=b2HDCP TX AKSV[4]=ee----------------HDCP Write AKSV to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4----------------HDCP Read BKSV From RX------------------------
HDCP RX BKSV[0]=70HDCP RX BKSV[1]=4eHDCP RX BKSV[2]=16HDCP RX BKSV[3]=f4HDCP RX BKSV[4]=cbHDCP wait Ri Ready--------HDCP R0RX is 2b65,R0TX is 2b65-----------HDCP TX M[0]=33HDCP TX M[1]=97HDCP TX M[2]=feHDCP TX M[3]=e0HDCP TX M[4]=cdHDCP TX M[5]=42
HDCP TX M[6]=13HDCP TX M[7]=33{DownStreamAuthState}: AuthenticatedMaJia ------ siiTXConfigVideoMode : In 2, Out 1, TblVal 0HDCP Authentication Begin...----------------HDCP Release CP and Generate AN------------------------HDCP TX AN[0]=f3HDCP TX AN[1]=53HDCP TX AN[2]=d7HDCP TX AN[3]=16
7/27/2019 Device Logs LiteOn App Crash Restart
35/103
HDCP TX AN[4]=17HDCP TX AN[5]=82HDCP TX AN[6]=f5HDCP TX AN[7]=35----------------HDCP Write AN to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4HDCP TX AKSV[0]=9HDCP TX AKSV[1]=71HDCP TX AKSV[2]=d8HDCP TX AKSV[3]=b2HDCP TX AKSV[4]=ee----------------HDCP Write AKSV to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4----------------HDCP Read BKSV From RX------------------------HDCP RX BKSV[0]=70HDCP RX BKSV[1]=4eHDCP RX BKSV[2]=16HDCP RX BKSV[3]=f4HDCP RX BKSV[4]=cbHDCP wait Ri Ready--------HDCP R0RX is 17ac,R0TX is 17ac-----------HDCP TX M[0]=97HDCP TX M[1]=6bHDCP TX M[2]=7c
HDCP TX M[3]=4bHDCP TX M[4]=a8HDCP TX M[5]=ebHDCP TX M[6]=8dHDCP TX M[7]=9b{DownStreamAuthState}: Authenticated--------HDCP R0RX is 17ac,R0TX is 17ac-----------NAND read: device 0 offset 0x2400000, size 0x2000000Skipping bad block 0x03520000Skipping bad block 0x03d40000Skipping bad block 0x03da000033554432 bytes read: OK
Wrong Image Format for bootm commandERROR: can't get kernel image!
NAND read: device 0 offset 0x57c0000, size 0x20000131072 bytes read: OK
NAND read: device 0 offset 0x3c0000, size 0x20000131072 bytes read: OK
NAND read: device 0 offset 0x5800000, size 0x10004096 bytes read: OKProcessing Application image.
NAND read: device 0 offset 0x2400000, size 0x13e0000Skipping bad block 0x0352000020840448 bytes read: OKlength 20709376: 316 whole chunks with 0 remainderdone!Verifying Image RSA signature... OK.Field Img Authentication passedCheck for Blob image...Processing Blob image.
7/27/2019 Device Logs LiteOn App Crash Restart
36/103
NAND read: device 0 offset 0x5801000, size 0x20000131072 bytes read: OK
Verifying Image RSA signature... OK.AppImg (Blob) authenticated and copied to RAM addr : 0xbfff000
... OK to boot## Booting kernel from Legacy Image at 08080000 ...
Image Name: 15098Br13228_ENG_cavium_tms_IHSImage Type: ARM Linux Kernel Image (uncompressed)Data Size: 20622350 Bytes = 19.7 MiBLoad Address: 08080040Entry Point: 08080040XIP Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux.......................................................................................................................................................... done, booting the kernel.mmc0: Version ID 0x5342230a.
mount: mounting tmpfs on /dev/shm failed: No such file or directoryStarting logging: /etc/init.d/S01logging: line 24: start-stop-daemon: not found/etc/init.d/S01logging: line 24: start-stop-daemon: not foundOKInitializing random number generator... done.cp: can't stat '/lib/firmware/qualcomm/ar9374/v5.0.0.28/hw1.3/bdata_.bin': No such file or directorycp: can't stat '/lib/firmware/qualcomm/ar9374/v5.0.0.28/hw3.0/bdata_.bin': No such file or directoryUIBC=0WIFI_PD_GPIO is blank, setting it to 10Exporting WIFI_PD_GPIOUsing normal low-power mode.
mkfifo: /cavium/wfd_rtsp_pipe: File existsath6kl: Disable firmware ext featureath6kl: wmi fail, cmd_id 0x29 ep_id 0 if_idx 0/etc/init.d/S80apprc: line 243: /cavium/parep2p: not foundcp: can't stat '': No such file or directoryrm: can't remove '': No such file or directory/etc/init.d/S80apprc: line 260: /cavium/resources/simpleGUI/splashgui.sh: not found
Trace initialized
semget: Setting up seamaphore: semget(0xd5d, 2, 1974)
main: semget: semget succeeded: semid = 32769Semaphore 3421 initialized.Semaphore 3421 initialized.OSD_COLOR_FORMAT_ARGB8888update fb0 configuration following fb2*** Init frame buffercommandline read: simpleGUI
~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.17 |~~~~~~~~~~~~~~~~~~~~~~~~~~(c) 2001-2012 The world wide DirectFB Open Source Community
7/27/2019 Device Logs LiteOn App Crash Restart
37/103
(c) 2000-2004 Convergence (integrated media) GmbH----------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2013-10-01 11:59)ash: you need to specify whom to kill(*) Direct/Memcpy: Using libc memcpy()(*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] ...(*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] ...(*) DirectFB/FBDev: Found 'cncfb' (ID 255) with frame buffer at 0x0c800000, 57344k (MMIO 0xb0000000, 0k)(*) Direct/Modules: suppress module 'linux_input'ORION GFX: Using fbdev = /dev/fb2(*) DirectFB/Graphics: Celestial Semiconductor Inc. Celestialsemi Orion1.3/1.3.1/1.4 2D Gfx 0.1 (Celestial Semiconductor Inc.)(*) DirectFB/Core/WM: Default 0.3 (directfb.org)(*) FBDev/mode: SETTING 1280x720 ARGB(*) FBDev/Mode: Switched to 1280x720 (virtual 1280x720) at 32 bit (ARGB), pitch5120
*** CEC DISABLED, SETTING CAPTURE ID TO 0 ***
setting ITC bit to 0SIMPLEGUI:hdmi_cable_pluggedOriginal EDID:
Manufacturer: GSMProduct Code: 0x570d
Serial Number: 0x00000d36Week of Mfg: 7Year of Mfg: 2009
Version: 1Revision: 3
Interface: DigitalColor Bit Depth: UndefinedInterface Std: Digital Interface Std is not defined
Horzontal: 48cm 18.48inVertical: 27cm 10.27in
Gamma: 2.20Standby: UnsupportedSuspend: Unsupported
Active Off: UnsupportedColor Type: RGB 4:4:4 & YCbCr 4:4:4
sRGB Std: is not the default color spacePreferred Mode: includes the native pixel format and preferred refresh
rate
Continous Freq: Display is non-continuous frequency (multi-mode)Chromaticity R: x 0.646, y 0.333
G: x 0.302, y 0.616B: x 0.147, y 0.067W: x 0.313, y 0.329
Est Timings: 720x400p @ 70Hz: 640x480p @ 60Hz: 640x480p @ 75Hz: 800x600p @ 60Hz: 800x600p @ 75Hz
7/27/2019 Device Logs LiteOn App Crash Restart
38/103
: 832x624p @ 75Hz: 1024x768p @ 60Hz: 1024x768p @ 70Hz: 1024x768p @ 75Hz: 1280x1024p @ 75Hz
Std Timings: 1280x1024p @ 60Hz: 1280x1024p @ 75Hz: 1152x864p @ 60Hz: 1680x1050p @ 60Hz: 1280x960p @ 75Hz: 1920x1080p @ 60Hz
Product Name: M227WADisp Range Lim: V min 56 Hz, max 75 Hz
: H min 30 kHz, max 83 kHz: pixel clock max 170 MHz
Audio Formats: 2 channels of LPCM at: 32, 44.1, 48 kHz: 16, 20, 24 bits/sample
Vendor Specific: 03 0c 00 10 00 b8 2c
0: 720 x 400 p 70hz (EST) 0 01: 640 x 480 p 60hz (EST) 0 02: 640 x 480 p 75hz (EST) 0 03: 800 x 600 p 60hz (EST) 0 0
4: 800 x 600 p 75hz (EST) 0 05: 832 x 624 p 75hz (EST) 0 06: 1024 x 768 p 60hz (EST) 0 07: 1024 x 768 p 70hz (EST) 0 08: 1024 x 768 p 75hz (EST) 0 09: 1280 x 1024 p 75hz (EST) 0 010: 1280 x 1024 p 60hz (STD) 5 411: 1280 x 1024 p 75hz (STD) 5 412: 1152 x 864 p 60hz (STD) 4 313: 1680 x 1050 p 60hz (STD) 16 1014: 1280 x 960 p 75hz (STD) 4 315: 1920 x 1080 p 60hz (STD) 16 916: 1920 x 1080 p 59hz*(EDID DTD) 0 0
17: 1680 x 1050 p 59hz (EDID DTD) 0 018: 1280 x 720 p 60hz (EXT SVD) 16 919: 1920 x 1080 i 60hz (EXT SVD) 16 920: 720 x 480 p 60hz (EXT SVD) 16 921: 720 x 480 p 60hz (EXT SVD) 4 322: 1920 x 1080 p 24hz (EXT SVD) 16 923: 1920 x 1080 p 30hz (EXT SVD) 16 924: 1920 x 1080 p 60hz (EXT SVD) 16 925: 720 x 576 p 50hz (EXT SVD) 4 326: 1280 x 720 p 50hz (EXT SVD) 16 927: 720 x 576 p 50hz (EXT SVD) 16 928: 1920 x 1080 i 50hz (EXT SVD) 16 929: 1920 x 1080 p 50hz (EXT SVD) 16 9
30: 720 x 480 i 60hz (EXT SVD) 16 931: 720 x 576 i 50hz (EXT SVD) 16 932: 1280 x 720 p 60hz (EXT DTD) 0 033: 1920 x 540 i 60hz (EXT DTD) 0 034: 720 x 480 p 59hz (EXT DTD) 0 035: 720 x 480 p 59hz (EXT DTD) 0 036: 1920 x 1080 p 60hz (EXT DTD) 0 0
Filtered EDID:
7/27/2019 Device Logs LiteOn App Crash Restart
39/103
Manufacturer: GSMProduct Code: 0x570d
Serial Number: 0x00000d36Week of Mfg: 7Year of Mfg: 2009
Version: 1Revision: 3
Interface: DigitalColor Bit Depth: UndefinedInterface Std: Digital Interface Std is not defined
Horzontal: 48cm 18.48inVertical: 27cm 10.27in
Gamma: 2.20Standby: UnsupportedSuspend: Unsupported
Active Off: UnsupportedColor Type: RGB 4:4:4 & YCbCr 4:4:4
sRGB Std: is not the default color spacePreferred Mode: includes the native pixel format and preferred refresh
rateContinous Freq: Display is non-continuous frequency (multi-mode)Chromaticity R: x 0.646, y 0.333
G: x 0.302, y 0.616B: x 0.147, y 0.067
W: x 0.313, y 0.329Est Timings: 640x480p @ 60Hz: 800x600p @ 60Hz: 1024x768p @ 60Hz
Std Timings: 1280x1024p @ 60Hz: 1920x1080p @ 60Hz
Product Name: M227WADisp Range Lim: V min 56 Hz, max 75 Hz
: H min 30 kHz, max 83 kHz: pixel clock max 170 MHz
Audio Formats: 2 channels of LPCM at: 32, 44.1, 48 kHz: 16, 20, 24 bits/sample
Vendor Specific: 03 0c 00 10 00 80 2c
1: 640 x 480 p 60hz (EST) 0 03: 800 x 600 p 60hz (EST) 0 06: 1024 x 768 p 60hz (EST) 0 010: 1280 x 1024 p 60hz (STD) 5 415: 1920 x 1080 p 60hz (STD) 16 916: 1920 x 1080 p 59hz*(EDID DTD) 0 018: 1280 x 720 p 60hz (EXT SVD) 16 919: 1920 x 1080 i 60hz (EXT SVD) 16 920: 720 x 480 p 60hz (EXT SVD) 16 921: 720 x 480 p 60hz (EXT SVD) 4 322: 1920 x 1080 p 24hz (EXT SVD) 16 9
23: 1920 x 1080 p 30hz (EXT SVD) 16 924: 1920 x 1080 p 60hz (EXT SVD) 16 925: 720 x 576 p 50hz (EXT SVD) 4 326: 1280 x 720 p 50hz (EXT SVD) 16 927: 720 x 576 p 50hz (EXT SVD) 16 929: 1920 x 1080 p 50hz (EXT SVD) 16 930: 720 x 480 i 60hz (EXT SVD) 16 931: 720 x 576 i 50hz (EXT SVD) 16 932: 1280 x 720 p 60hz (EXT DTD) 0 034: 720 x 480 p 59hz (EXT DTD) 0 0
7/27/2019 Device Logs LiteOn App Crash Restart
40/103
35: 720 x 480 p 59hz (EXT DTD) 0 036: 1920 x 1080 p 60hz (EXT DTD) 0 0
Waiting for EDID## NOTE: "TVOUT_MODE" not definedSimpleGUI:: Setting TV resolution from EDIDSimpleGUI:: Invoking CSTVOUT_SetMode(tvout0, 16) @ Line=3764SimpleGUI:: Sending TV out TV resolution change 16 to nethd_control @ Line=3562(*) Direct/Interface: Loaded 'PNG' implementation of 'IDirectFBImageProvider'.
Trace initializedcp: can't stat '/etc/conf/wifi/hostapd.conf': No such file or directoryWIFI_MGMT_EXTRA2=--dbg-level 31 --p2p-pbc-policy ask --concurrent-connect allow--concurrent-listen deny --wifi-force-reg-domain US from /mnt/jffs2/cavium/crumbs/wifi_mgmt2.cfgInside gpio_poll_buttonStarting wifi_mgmt2 : --wifi-dev qualcomm_ar9374_hw13 --sta --dbg-level 31 --p2p-pbc-policy ask --concurrent-connect allow --concurrent-listen deny --wifi-force-reg-domain USStarting Web Server## NOTE: "SHOW_IDLE_SCREEN_WHEN_DOZING" not defined## NOTE: "RTCP_RR_PERIOD" not defined
Trace initialized
## NOTE: "IDR_REQ_PERIOD" not defined## NOTE: "RTPTCP" not defined
sh: bad numbersh: bad numbersh: : unknown operandDLNA=1 DLNA_P2P=0 WFD=
Trace initialized
VERBOSE : 257
cncsec module already inserted.sec1800l_blob module already inserted.Uniq: 2 blobs found
buf_len after reducing PL and content key : 1728error : CSVID_GetSRCSequenceHeader in line 2561error : CSVID_SetOutputPostion in line 2056#
****************************************************************DMR_APP argument - SIMPLEGUI_DLNA=1DMR_APP argument - DMRONLY=1
DMR_APP argument - GENERATE_UUID_FILE=0****************************************************************
Trace initialized
Trace initializedCNC_OS_TimerCreate: name=[CNC_OS_Timer].countMs=[1100].[MID] ====CNC_SYSTEM_Init Successful!====
7/27/2019 Device Logs LiteOn App Crash Restart
41/103
[CNC_setting-e] read data erro, Save Crc:0x00000000, Now Crc:0x0834f524[CNC_setting-e] Default data loaded OK!CSVID Version : Oct 5 2013CSAUD Version : Oct 5 2013CSAUD_Init in line 1353CSAUD_EnableDAC in line 2769CSAUD_EnableDAC in line 2769CSAUD_EnableSPDIF in line 2686OSD_COLOR_FORMAT_ARGB8888update fb0 configuration following fb2HDMI_SEND_PID failed!simpleGUI.c :
hdcp_verify_certificate: Verifying Device [0xAE5C66A70C] Certificate [ret=0 stat=1](*) Direct/Interface: Loaded 'FT2' implementation of 'IDirectFBFont'.
hdcp_init:semget: Setting up seamaphore: semget(0xd5d, 1, 1974)semget: semget failed: File exists
hdcp_init:semget: Setting up seamaphore: semget(0xd5d, 1, 438)Initializing Crypto H/W handleopenOutputPipe: open pipe /cavium/avdp_to_nethd_pipe_ignore error 2CSVID Version : Oct 5 2013CSAUD Version : Oct 5 2013
CSTVOUT_EnableHD2SD Handle ERROR in line 1390Disabled OSD clear in osd_display_getPipeline functionSU_FontInit TTFgfiles[i].fd = 15gfiles[i].fd: No such file or directorysh: /cavium/resources/simpleGUI/release_back.sh: not foundCSAUD_Init in line 1353sh: /cavium/resources/simpleGUI/release_back.sh: not foundgfiles[i].fd = 15gfiles[i].fd: No such file or directoryln: background.png: File existskillall: udhcpc: no process killedroute: SIOCDELRT: No such processgfiles[i].fd = 15
gfiles[i].fd: No such file or directory
=====================================DMR Device Configuration Information:=====================================Manufacturer Name : [CAVIUM]Manufacturer URL : [www.cavium.com]Model Name : [CAVIUM Media Dongle]Model Description : [Supports DMR and Mirroring features]Model Number : [CAVIUM Media Dongle, v1.0]Model URL : [www.cavium.com/cavium_media]Serial Number : [CAVIUM_MEDIA:00001]
=====================================
*************************************The UUID 24430284-1dd2-11b2-83f6-2244274cc54f*************************************IP for interface [wlan0]: [192.168.11.6]*********************************The configured thread attributes*********************************
7/27/2019 Device Logs LiteOn App Crash Restart
42/103
Total Thread = 12Job and Thread Ratio = 10Total Job = 100*********************************sh: /cavium/resources/simpleGUI/release_back.sh: not foundifconfiglo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0inet6 addr: ::1/128 Scope:HostUP LOOPBACK RUNNING MTU:16436 Metric:1RX packets:0 errors:0 dropped:0 overruns:0 frame:0TX packets:0 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:0RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
wlan0 Link encap:Ethernet HWaddr 00:1B:4A:00:24:A0inet addr:192.168.11.6 Bcast:192.168.11.255 Mask:255.255.255.0inet6 addr: fe80::21b:4aff:fe00:24a0/64 Scope:LinkUP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1RX packets:549 errors:0 dropped:0 overruns:0 frame:0TX packets:607 errors:0 dropped:0 overruns:0 carrier:0collisions:0 txqueuelen:1000RX bytes:103275 (100.8 KiB) TX bytes:378999 (370.1 KiB)
#
U-Boot 2011.06-svn11677 (Sep 17 2012 - 18:10:42)
I2C: readyDRAM: 256 MiBSPI Speed at [R:23MHz/W:47MHz] Flash Size: 64KBNAND: 128 MiBMMC:initializing secure environmentBad block table found at page 65472, version 0x01Bad block table found at page 65408, version 0x01nand_read_bbt: Bad block at 0x000003520000
nand_read_bbt: Bad block at 0x000003d40000nand_read_bbt: Bad block at 0x000003da0000nand_read_bbt: Bad block at 0x000004840000nand_read_bbt: Bad block at 0x0000048a0000nand_read_bbt: Bad block at 0x000004ea0000In: serialOut: serialErr: serialMAC: 00:1a:cc:00:00:01Hit any key to stop autoboot: 0
NAND read: device 0 offset 0x1c0000, size 0x1c20101843216 bytes read: OK
mode = 5, picture_color_mode = 21GFXLINEPITCHSIZE = 2560, screen_h = 7202GFXLINEPITCHSIZE = 2560, screen_h = 720tvmode = 5GFXLINEPITCHSIZE = 2560,screen_w 1280, screen_h 720,picture_color_mode 2pic_w = 1280,pic_h = 720,dst_x = 0,dst_y = 0ColorImg->LinePitch 0xa00,ColorImg->StartAddress 0xc000000,ColorImg->PixelHeight720,ColorImg->PixelWidth 1280
ColorImg->ColorFormat 2
7/27/2019 Device Logs LiteOn App Crash Restart
43/103
layer_output.gfx_output[0] = 0Reg->df_gfx_control_reg.bits.iGfxEna = 1Display configurate complete!
argc=[2].argv[0]=[hdmi.bin].argv[1]=[5].main=[02056c94].in main:printf=[02056db8].in main:_start=[e92d01f0].mode=[5]MaJia ------ siiTXConfigVideoMode : In 5, Out 1, TblVal 27HDCP Authentication Begin...----------------HDCP Release CP and Generate AN------------------------HDCP TX AN[0]=8aHDCP TX AN[1]=20HDCP TX AN[2]=d7HDCP TX AN[3]=f8HDCP TX AN[4]=a8HDCP TX AN[5]=a4HDCP TX AN[6]=64HDCP TX AN[7]=32
----------------HDCP Write AN to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4HDCP TX AKSV[0]=9HDCP TX AKSV[1]=71HDCP TX AKSV[2]=d8HDCP TX AKSV[3]=b2HDCP TX AKSV[4]=ee----------------HDCP Write AKSV to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4----------------HDCP Read BKSV From RX------------------------HDCP RX BKSV[0]=70HDCP RX BKSV[1]=4eHDCP RX BKSV[2]=16
HDCP RX BKSV[3]=f4HDCP RX BKSV[4]=cbHDCP wait Ri Ready--------HDCP R0RX is a5c6,R0TX is a5c6-----------HDCP TX M[0]=c2HDCP TX M[1]=b2HDCP TX M[2]=efHDCP TX M[3]=ecHDCP TX M[4]=56HDCP TX M[5]=62HDCP TX M[6]=45HDCP TX M[7]=fd{DownStreamAuthState}: Authenticated
MaJia ------ siiTXConfigVideoMode : In 2, Out 1, TblVal 0HDCP Authentication Begin...----------------HDCP Release CP and Generate AN------------------------HDCP TX AN[0]=54HDCP TX AN[1]=56HDCP TX AN[2]=1dHDCP TX AN[3]=78HDCP TX AN[4]=d9HDCP TX AN[5]=1eHDCP TX AN[6]=5f
7/27/2019 Device Logs LiteOn App Crash Restart
44/103
HDCP TX AN[7]=f4----------------HDCP Write AN to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4HDCP TX AKSV[0]=9HDCP TX AKSV[1]=71HDCP TX AKSV[2]=d8HDCP TX AKSV[3]=b2HDCP TX AKSV[4]=ee----------------HDCP Write AKSV to RX------------------------~~~~~~~~~~~~~~~~~~MDDC Write status=4----------------HDCP Read BKSV From RX------------------------HDCP RX BKSV[0]=70HDCP RX BKSV[1]=4eHDCP RX BKSV[2]=16HDCP RX BKSV[3]=f4HDCP RX BKSV[4]=cbHDCP wait Ri Ready--------HDCP R0RX is 1f6e,R0TX is 1f6e-----------HDCP TX M[0]=3fHDCP TX M[1]=3eHDCP TX M[2]=2HDCP TX M[3]=27HDCP TX M[4]=bbHDCP TX M[5]=b6
HDCP TX M[6]=52HDCP TX M[7]=91{DownStreamAuthState}: Authenticated--------HDCP R0RX is 1f6e,R0TX is 1f6e-----------NAND read: device 0 offset 0x2400000, size 0x2000000Skipping bad block 0x03520000Skipping bad block 0x03d40000Skipping bad block 0x03da000033554432 bytes read: OKWrong Image Format for bootm commandERROR: can't get kernel image!
NAND read: device 0 offset 0x57c0000, size 0x20000131072 bytes read: OK
NAND read: device 0 offset 0x3c0000, size 0x20000131072 bytes read: OK
NAND read: device 0 offset 0x5800000, size 0x10004096 bytes read: OKProcessing Application image.
NAND read: device 0 offset 0x2400000, size 0x13e0000Skipping bad block 0x0352000020840448 bytes read: OK
length 20709376: 316 whole chunks with 0 remainderdone!Verifying Image RSA signature... OK.Field Img Authentication passedCheck for Blob image...Processing Blob image.
NAND read: device 0 offset 0x5801000, size 0x20000131072 bytes read: OK
7/27/2019 Device Logs LiteOn App Crash Restart
45/103
Verifying Image RSA signature... OK.AppImg (Blob) authenticated and copied to RAM addr : 0xbfff000
... OK to boot## Booting kernel from Legacy Image at 08080000 ...
Image Name: 15098Br13228_ENG_cavium_tms_IHSImage Type: ARM Linux Kernel Image (uncompressed)Data Size: 20622350 Bytes = 19.7 MiBLoad Address: 08080040Entry Point: 08080040XIP Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux.......................................................................................................................................................... done, booting the kernel.mmc0: Version ID 0x5342230a.mount: mounting tmpfs on /dev/shm failed: No such file or directoryStarting logging: /etc/init.d/S01logging: line 24: start-stop-daemon: not found/etc/init.d/S01logging: line 24: start-stop-daemon: not found
OKInitializing random number generator... done.cp: can't stat '/lib/firmware/qualcomm/ar9374/v5.0.0.28/hw1.3/bdata_.bin': No such file or directorycp: can't stat '/lib/firmware/qualcomm/ar9374/v5.0.0.28/hw3.0/bdata_.bin': No such file or directoryUIBC=0WIFI_PD_GPIO is blank, setting it to 10Exporting WIFI_PD_GPIOUsing normal low-power mode.mkfifo: /cavium/wfd_rtsp_pipe: File existsath6kl: Disable firmware ext featureath6kl: wmi fail, cmd_id 0x29 ep_id 0 if_idx 0
/etc/init.d/S80apprc: line 243: /cavium/parep2p: not foundcp: can't stat '': No such file or directoryrm: can't remove '': No such file or directory/etc/init.d/S80apprc: line 260: /cavium/resources/simpleGUI/splashgui.sh: not found
Trace initialized
semget: Setting up seamaphore: semget(0xd5d, 2, 1974)
main: semget: semget succeeded: semid = 32769Semaphore 3421 initialized.Semaphore 3421 initialized.
OSD_COLOR_FORMAT_ARGB8888update fb0 configuration following fb2*** Init frame buffercommandline read: simpleGUI
~~~~~~~~~~~~~~~~~~~~~~~~~~| DirectFB 1.4.17 |~~~~~~~~~~~~~~~~~~~~~~~~~~(c) 2001-2012 The world wide DirectFB Open Source Community(c) 2000-2004 Convergence (integrated media) GmbH
----------------------------------------------------------------
7/27/2019 Device Logs LiteOn App Crash Restart
46/103
(*) DirectFB/Core: Single Application Core. (2013-10-01 11:59)(*) Direct/Memcpy: Using armasm_memcpy()ash: you need to specify whom to kill(*) Direct/Thread: Started 'VT Switcher' (-1) [CRITICAL OTHER/OTHER 0/0] ...(*) Direct/Thread: Started 'VT Flusher' (-1) [DEFAULT OTHER/OTHER 0/0] ...(*) DirectFB/FBDev: Found 'cncfb' (ID 255) with frame buffer at 0x0c800000, 57344k (MMIO 0xb0000000, 0k)(*) Direct/Modules: suppress module 'linux_input'ORION GFX: Using fbdev = /dev/fb2(*) DirectFB/Graphics: Celestial Semiconductor Inc. Celestialsemi Orion1.3/1.3.1/1.4 2D Gfx 0.1 (Celestial Semiconductor Inc.)(*) DirectFB/Core/WM: Default 0.3 (directfb.org)(*) FBDev/mode: SETTING 1280x720 ARGB(*) FBDev/Mode: Switched to 1280x720 (virtual 1280x720) at 32 bit (ARGB), pitch5120
*** CEC DISABLED, SETTING CAPTURE ID TO 0 ***
setting ITC bit to 0
SIMPLEGUI:hdmi_cable_pluggedOriginal EDID:
Manufacturer: GSMProduct Code: 0x570d
Serial Number: 0x00000d36Week of Mfg: 7Year of Mfg: 2009
Version: 1Revision: 3
Interface: DigitalColor Bit Depth: UndefinedInterface Std: Digital Interface Std is not defined
Horzontal: 48cm 18.48inVertical: 27cm 10.27inGamma: 2.20
Standby: UnsupportedSuspend: Unsupported
Active Off: UnsupportedColor Type: RGB 4:4:4 & YCbCr 4:4:4
sRGB Std: is not the default color spacePreferred Mode: includes the native pixel format and preferred refresh
rateContinous Freq: Display is non-continuous frequency (multi-mode)Chromaticity R: x 0.646, y 0.333
G: x 0.302, y 0.616
B: x 0.147, y 0.067W: x 0.313, y 0.329
Est Timings: 720x400p @ 70Hz: 640x480p @ 60Hz: 640x480p @ 75Hz: 800x600p @ 60Hz: 800x600p @ 75Hz: 832x624p @ 75Hz: 1024x768p @ 60Hz: 1024x768p @ 70Hz
7/27/2019 Device Logs LiteOn App Crash Restart
47/103
: 1024x768p @ 75Hz: 1280x1024p @ 75Hz
Std Timings: 1280x1024p @ 60Hz: 1280x1024p @ 75Hz: 1152x864p @ 60Hz: 1680x1050p @ 60Hz: 1280x960p @ 75Hz: 1920x1080p @ 60Hz
Product Name: M227WADisp Range Lim: V min 56 Hz, max 75 Hz
: H min 30 kHz, max 83 kHz: pixel clock max 170 MHz
Audio Formats: 2 channels of LPCM at: 32, 44.1, 48 kHz: 16, 20, 24 bits/sample
Vendor Specific: 03 0c 00 10 00 b8 2c
0: 720 x 400 p 70hz (EST) 0 01: 640 x 480 p 60hz (EST) 0 02: 640 x 480 p 75hz (EST) 0 03: 800 x 600 p 60hz (EST) 0 04: 800 x 600 p 75hz (EST) 0 05: 832 x 624 p 75hz (EST) 0 06: 1024 x 768 p 60hz (EST) 0 0
7: 1024 x 768 p 70hz (EST) 0 08: 1024 x 768 p 75hz (EST) 0 09: 1280 x 1024 p 75hz (EST) 0 010: 1280 x 1024 p 60hz (STD) 5 411: 1280 x 1024 p 75hz (STD) 5 412: 1152 x 864 p 60hz (STD) 4 313: 1680 x 1050 p 60hz (STD) 16 1014: 1280 x 960 p 75hz (STD) 4 315: 1920 x 1080 p 60hz (STD) 16 916: 1920 x 1080 p 59hz*(EDID DTD) 0 017: 1680 x 1050 p 59hz (EDID DTD) 0 018: 1280 x 720 p 60hz (EXT SVD) 16 919: 1920 x 1080 i 60hz (EXT SVD) 16 9
20: 720 x 480 p 60hz (EXT SVD) 16 921: 720 x 480 p 60hz (EXT SVD) 4 322: 1920 x 1080 p 24hz (EXT SVD) 16 923: 1920 x 1080 p 30hz (EXT SVD) 16 924: 1920 x 1080 p 60hz (EXT SVD) 16 925: 720 x 576 p 50hz (EXT SVD) 4 326: 1280 x 720 p 50hz (EXT SVD) 16 927: 720 x 576 p 50hz (EXT SVD) 16 928: 1920 x 1080 i 50hz (EXT SVD) 16 929: 1920 x 1080 p 50hz (EXT SVD) 16 930: 720 x 480 i 60hz (EXT SVD) 16 931: 720 x 576 i 50hz (EXT SVD) 16 932: 1280 x 720 p 60hz (EXT DTD) 0 0
33: 1920 x 540 i 60hz (EXT DTD) 0 034: 720 x 480 p 59hz (EXT DTD) 0 035: 720 x 480 p 59hz (EXT DTD) 0 036: 1920 x 1080 p 60hz (EXT DTD) 0 0
Filtered EDID:
Manufacturer: GSMProduct Code: 0x570d
Serial Number: 0x00000d36
7/27/2019 Device Logs LiteOn App Crash Restart
48/103
Week of Mfg: 7Year of Mfg: 2009
Version: 1Revision: 3
Interface: DigitalColor Bit Depth: UndefinedInterface Std: Digital Interface Std is not defined
Horzontal: 48cm 18.48inVertical: 27cm 10.27in
Gamma: 2.20Standby: UnsupportedSuspend: Unsupported
Active Off: UnsupportedColor Type: RGB 4:4:4 & YCbCr 4:4:4
sRGB Std: is not the default color spacePreferred Mode: includes the native pixel format and preferred refresh
rateContinous Freq: Display is non-continuous frequency (multi-mode)Chromaticity R: x 0.646, y 0.333
G: x 0.302, y 0.616B: x 0.147, y 0.067W: x 0.313, y 0.329
Est Timings: 640x480p @ 60Hz: 800x600p @ 60Hz
: 1024x768p @ 60HzStd Timings: 1280x1024p @ 60Hz: 1920x1080p @ 60Hz
Product Name: M227WADisp Range Lim: V min 56 Hz, max 75 Hz
: H min 30 kHz, max 83 kHz: pixel clock max 170 MHz
Audio Formats: 2 channels of LPCM at: 32, 44.1, 48 kHz: