DialogAd Sm Chapter 7-8-2008

Dialog/Dialog Advanced 7 . S p a r e P a r t s L i s t 8 / 2 0 0 8 7-1

BA-TE08C M.KAY DialogAd_sm_Chapter 7_8-2008.doc/pdf <081102> yymmdd B. Braun Avitum AG

Contact your LocalB. Braun Representative

for Service Support

Spare Parts List The spare parts list (edition 8/2008, edition date 08.11.02) isvalid with immediate effect. All previous spare parts lists areinvalid.

Refurbished Spare Parts Conditions of Delivery for Refurbished Spare Parts (dependingon availability):Defective spare parts must be sent back with theaccompanying documents (Material Return Form) to B. BraunAvitum AG via the representative of the respective country forthe ability to supply refurbished spare parts. The condition andthe version of the defective spare parts must allow a qualifiedrefurbishment.

Backward Compatibilityof Spare Parts

New spare parts always have article numbers with numericcharacters and are backward compatible unless otherwisespecified in the spare parts list. If a spare part is modified the lastdigit of the article number changes to an alphabetic characterwith the initial index A. These spare parts are in principlebackward compatible to the previous article number (numeric oralphanumeric - with or without an index). See table with anexample for the switch mode power supply SMPS.

34519572

34514740

3451957A

3451474A

3451957B

3451474B

3451957C3451957D

- new numerical art. no.

- new numerical art. no.- backward compatible

- present alphanumerical art. no.- backward compatible

- alphanumerical art. no.- initial index A- backward compatible

- alphanumerical art. no.- initial index A- backward compatible

B. Braun Avitum AGSchwarzenberger Weg 73 - 79

34212 MelsungenGermany

Technical Hotline (Germany): Tel. No.: +49 5661 71 3796

Technical Support (Germany): Tel. No.: +49 5661 71 3500

Spare Parts (Germany): Tel. No.: +49 5661 71 3662E-Mail: [email protected]

Dialog/Dialog Advanced 7 . S p a r e P a r t s L i s t 8 / 2 0 0 8 7-2


B. Braun Avitum AGWareneingang - Service

Schwarzenberger Weg 73-79

D-34212 MelsungenGermany

Reason for returning the part (please tick !):

Warranty return (replacement to be ordered separately) ----------------"Defective part for refurbishment --------------------------------------"Wrong shipment -----------------------------------------------------"Complaint sample (use complaint form for details) ---------------------"Part returned for investigation ----------------------------------------"Part returned for disposal by the manufacturer -------------------------"

Sender: Name of Company: ....................................................................................................................................................................................................

..........................................................................................................................................................................................................................................................

............................................................................................................................... City: ...............................................................................................................

Country: .............................................................................................................. Name of responsible person: ..................................................................

Customer number: ........................................................................................... Telephone/e-mail: .....................................................................................

Returned part: Article number: ................................................................. Part serial number: ...................................................................................

Part description: .........................................................................................................................................................................................................................

Description of the defect: ........................................................................................................................................................................................................

..........................................................................................................................................................................................................................................................

From machine type: .................................................. Serial number: ................................................. Working hours: .......................................

Software Version: ......................................................... Description of the problem on the machine: ....................................................................

..........................................................................................................................................................................................................................................................

..........................................................................................................................................................................................................................................................

The described defect appears: Intermittently " Permanently " (please tick !)

Cleaned/disinfected: cleaned " yes disinfected " yes (please tick !)

Disinfectant: ......................................................................................................................................................................

Cleaning and Disinfection of Spare Parts Used in a Dialog MachineAll spare parts sent by the customer to the B. Braun representative for repair, complaint, refurbishment, technical analysis orwarranty must be cleaned and disinfected (exception: boards). Spare parts considerably soiled, damaged or not disinfected arescrapped.

Packaging Notice:Each returned part must be properly packed to prevent any damage during transportation due to mechanical impact ordue to electrostatic discharge. The safest way to prevent damage is by using the packaging material from the new sparepart and by packing the returned part exactly in the same way.Returned parts containing electronic components (electrostatic sensitive devices) must be packed in special ESD packagingmaterial. Only shielded bags or antistatic bags may be used. Unprotected electronic parts (e.g. wrapped in normal plastic bags orparts padded with Styrofoam) are assumed to be damaged by electrostatic discharge and will be scrapped.

Material Return Form

This form must be attached to every spare part sent back to your B. Braun representative!Spare parts without this form are scraped.

Please Copy!

Dialog/Dialog Advanced 7 . S p a r e P a r t s L i s t 8 / 2 0 0 8


7-3

!

Copyright This document is the property of B. Braun Avitum AG with all rights reserved.

Commissioning and Service Only trained personnel must commission and service the Dialog.Servicing must only be performed with proper tools, calibration equipment and be in accordance withthe most recent revision of this service manual/technical information, which must be clearly andthoroughly understood.

Prevent Electrical Shock Hazard Switch off the Dialog and disconnect unit from mains if you have to open the machine for servicing.Do not touch any exposed wiring or conductive surfaces while the Dialog is opened. The voltagespresent when electrical power is connected to the Dialog can cause serious injury or death.

High Voltage Battery Option If a battery option is present in the machine: high voltage can be present in the basic housing andmonitor due to the battery (if monitor booster is defective), even if the machine has beendisconnected from mains. Pull out the battery compartment in the base platform and switch off thebattery voltage before opening the machine.

Prevent Shorts during Exchange of Boards/Valves/Pumps (+24 VL) Mains Power Supply (Ascom/Delta)Prevent shorts during the exchange of boards, valves and pumps: remove the fuse SI 14 6.3 AT (+24VL) from the mains power supply (Ascom/Delta), because the +24 VL reduction is very slow.

Connection and Operation Service Board The service board must only be operated in the TSM service program. If the service board is connectedto the Dialog it is prohibited to connect a patient to the Dialog and to run a therapy.

Prevent Chemical Burns and Scalding During servicing on running machines: prevent chemical burns and scalding of the skin due to thepenetration of disinfectant or hot liquid.

Contaminated Machines Protective gear should be worn in case of servicing of assumed contaminated machines.

Cover in Rear Door Servicing of mechanical assembly groups (components in contact with fluid): the black cover in therear door must be assembled during servicing because it serves as a spray protection for the assembledprinted circuit boards.

Tubing Tubing must be replaced only by the same tubing type/length and identical installation manner.Make sure that the tubings in the machine are not kinked or twisted after servicing (e.g. if sub-racksare pulled out and inserted again). The tubing must not touch moving/rotating components (e.g.motors of gear pumps).



7-4Wiring Wiring must be replaced only by the same cable type/length and identical installation manner. The

cables must not touch moving/rotating components (e.g. motors of gear pumps).

O-Rings Always check o-rings from disassembled groups/components and replace if necessary.

ESD Information Pay attention to ESD information, because electronic components are sensitive to electrostaticdischarges.

Figures The displayed figures can differ slightly from the machines on site, due to different hardware statuses.

Calibration Only perform a calibration after the Dialog has reached working temperature. You should save thecalibration data to the hard disk drive before you exit the TSM service program: TSM Main Menu, FileOperations, Save Calibration Data.

Fuses If fuses are replaced they must exactly match the type and rating specified by the manufacturer in thespare parts list/technical information. Where applicable: fuses must be approved by UL/CSA.

Spare Parts Only use original spare parts manufactured and sold by B. Braun Avitum AG.

TSM Service Program Only activate the TSM service program for service activities. It is prohibited to connect a patient tothe Dialog and to run a therapy if the TSM service program is activated in the Dialog.If the TSM service program is activated the audible alarm is switched off.The TSM service program is started in the service mode: supervisor board, hardware switch K1,position 2.

Software The software is installed in the software mode: supervisor board, hardware switch K1, position 3.

Therapy Mode After completion of all procedures switch back to the therapy mode: supervisor board, hardwareswitch K1, position 0.

Function Check Check the respective function of the assembly group/component after servicing. A complete functioncheck must be performed after every service, according to the operating instructions.



7-5

Table of Contents Page

7.1 Sub-Racks Dialog 7-97.2 Sub-Racks Dialog Advanced 7-107.3 Overview Solenoid Valves 7-117.3.1 Solenoid Valve Dialog 7-117.3.2 Solenoid Valves Dialog Advanced 7-127.4 Water Inlet Sub-Rack Dialog 7-137.4.1 Upline Tank Dialog 7-157.5 Water Inlet Sub-Rack Dialog Advanced 7-167.5.1 Upline Tank Dialog Advanced 7-177.6 DF Sub-Rack Dialog 7-187.6.1 DF Distribution Manifold Dialog 7-197.6.2 Piston Pumps Dialog 7-227.7 DF Sub-Rack Dialog Advanced 7-237.7.1 DF Distribution Manifold Dialog Advanced 7-247.7.2 Piston Pumps Dialog Advanced 7-277.8 UF Sub-Rack Dialog 7-287.8.1 Air Separator Assembly Group Dialog 7-297.8.2 Balance Chamber 1 Dialog 7-307.9 UF Sub-Rack Dialog Advanced 7-317.9.1 Air Separator Assembly Group Dialog Advanced 7-327.9.2 Balance Chamber 2 Dialog Advanced 7-33



7-6

Page

7.10 Top Level Sub-Rack 7-347.10.1 Motherboard POS-460 7-347.10.2 Motherboard GX1LCD 7-357.11 Rear Door 7-367.11.1 Compatibility Table for Boards 7-387.11.2 Mains Power Supply (Ascom/Delta) Dialog 7-397.11.3 Switch Mode Power Supply SMPS (Benning) Dialog Advanced 7-407.11.3.1 Compatibility Table SMPS (Benning) 7-407.12 Front Door Dialog 7-427.13 Front Door Dialog Advanced 7-447.14 Basic Housing Dialog 7-467.14.1 Concentrate Suction Rods Dialog 7-477.14.2 Rinsing Chambers for Concentrate Suction Rods Dialog 7-487.14.3 Rinsing Bridge 1 Dialog 7-497.15 Basic Housing Dialog Advanced 7-537.15.1 Concentrate Suction Rods Dialog Advanced 7-547.15.2 Rinsing Chambers for Concentrate Suction Rods Dialog Advanced 7-557.15.3 Rinsing Bridge 2 Dialog Advanced 7-567.16 Colour Monitor 7-597.17 Test and Calibration Equipment and Tools 7-617.18 Service Kits 7-64



7-7

Page

7.19 Software 7-667.19.1 Compatibility Table Software 7-677.19.2 Compatibility Table Software Patches/BIOS Update 7-677.20 Miscellaneous 7-687.21 HDF Bag (Substitution Option) 7-707.22 HDF Bag (Option) 7-717.22.1 Flow Detector 7-727.22.2 UF Piston Pump 7-737.22.3 HFS Board 7-737.23 Staff Call (Option) 7-747.24 Single Needle Valve (Option) 7-757.25 Bicarbonate Cartridge Holder (Option) 7-767.25.1 BIC Cartridge Holder 7-767.25.2 Air Separator LAB1, Throttle DBK and Valve VBKO/VBKS 7-777.25.3 Air Separator LAB2/Valve VBICP and Valve VVB 7-787.25.4 BIC Cartridge Holder Boards 7-787.26 Bicarbonate Cartridge Holder with Valve (Option) 7-797.26.1 BIC Cartridge Holder with Valve 7-797.26.2 Air Separator LAB2/Valve VBICP and Valve VVB 7-807.26.3 Air Separator LAB1, Throttle DBK and Valve VBKO/VBKS 7-817.26.4 BIC Cartridge Holder Boards 7-82



7-8

Page

7.27 HDF Online (Option) 7-837.27.1 Substitution Port 7-847.27.2 UF Sub-Rack HDF Online 7-857.27.3 Valve Block HDF Online 7-867.27.4 HDF Online Boards 7-877.27.5 DF/HDF Filter Holder HDF Online 7-887.28 Automatic Blood Pressure Measurement ABPM (Option) 7-907.28.1 Automatic Blood Pressure Measurement ABPM Module M2000 7-907.28.1.1 Compatibility Table ABPM Modules/Interface Boards 7-917.28.2 Automatic Blood Pressure Measurement ABPM Module M2005 7-927.28.2.1 Compatibility Table ABPM Module M2005 7-937.29 Battery (Option) 7-947.29.1 Battery Sub-Rack 7-957.29.2 Charge LED 7-967.30 Nexadia -BSL/WAN-BSL (Option) 7-977.31 Spare Parts List Alphabetical Order 7-987.32 Changes/Modifications in Spare Parts List 7-117

Dialog/Dialog Advanced 7 . S p a r e P a r t s L i s t 8 / 2 0 0 8Pos. Art. No. Qty. Description Comments


7-9

7.1 Sub-Racks Dialog1 - Top level sub-rack see paragraph 7.10 for

single parts

2 - UF sub-rack see paragraph 7.8 forsingle parts

3 - DF sub-rack see paragraph 7.6 forsingle parts

4 - Water inlet sub-rack see paragraph 7.4 forsingle parts



7-10

7.2 Sub-Racks Dialog Advanced5 - Top level sub-rack see paragraph 7.10 for

single parts

6 - UF sub-rack see paragraph 7.9 forsingle parts

7 - DF sub-rack see paragraph 7.7 forsingle parts

8 - Water inlet sub-rack see paragraph 7.5 forsingle parts



7-11

7.3 Overview Solenoid Valves7.3.1 Solenoid Valve Dialog

1 34517979 1 Solenoid valve 2/2 way coil straight, connector/flange(pay attention to bottom notes)

1

A

B CNotes for Solenoid Valve 34517979

Self-Locking Nut ADo not readjust the self-locking nut A,because the nut is assembled with adefined torque (1.3 Nm ± 10 %).

The position of the magnet coil can beadapted to the assembly location, i.e. thecoil can be carefully turned (B or C)without loosening the self-locking nut. Theprocedure is only permissible if the coil canbe turned without much effort.



7-12

7.3.2 Solenoid Valves Dialog Advanced1 3451902B 1 Solenoid valve 2/2 way coil straight, connector/flange (AKM)

(pay attention to bottom notes)

2 3451906C 1 Solenoid valve 2/2 way coil straight, connector/connector (AKM)

2

1

AB C 1i

iiiii

2ivv

iv 1 x Screw 40x10v 1 x Washer 4.2

i 1 x Screw M4ii 2 x Spring Washer 4.2iii 1 x Washer 4.2

Notes for Solenoid Valve 3451902B

Self-Locking Nut ADo not readjust the self-locking nut A,because the nut is assembled with adefined torque (1.3 Nm ± 10 %).

The position of the magnet coil can beadapted to the assembly location, i.e. thecoil can be carefully turned (B or C)without loosening the self-locking nut A.The procedure is only permissible if the coilcan be turned without much effort.



7-13

VZRVDA

WT

VBTSE

H

RVVB

DMV

1 32 4 5,6 7 8,9 6,10

11,611,614,6 13 1218 17 16,15

6,10

7.4 Water Inlet Sub-Rack Dialog1 3451727B 1 Throttle 0.4 bar

1 3451664B 1 Throttle 1.3 bar for Dialog with HDF online

1 34570683 20 O-ring 4.47 x 1.78

2 3451603B 1 Solenoid valve 2/2 way

2 34517979 1 Solenoid valve 2/2 way coil straight, connector/flange

2 34770852 5 O-ring 11.1 x 1.6

3 34511547 1 Heat exchanger(option)

insulation material and cable ties are obsolete and notrequired after replacement or retrofitting the option

4 3451614B 1 Temperature sensor without connector

4 3477104A 10 O-ring 8.3 x 2.4

5 34511164 1 Tubing connector ∅ 9 x 1/4" stainless steel

6 34770852 5 O-ring 11.1 x 1.6

7 34560165 1 Upline tank with lid see separate figure

8 3451604B 1 Level sensor complete see separate figure

9 34560246 1 Float ball incl. o-ring see separate figure

10 3477084A 5 Tubing connector ∅ 7 x 1/8" plastic


12 34516069 1 Throttle 0 - 4 bar

13 34516077 1 Proportional control valve

13 34570292 10 Vibration absorber for RVVB

�14�3451457A��5�Reducer tubing connector�replaces tubing connector 34517243 and reducer 14�3

3451457A�� 5� Reducer tubing connector�replaces replaces tubing connector 34517243and reducer 34570306 in tubing��

�

15 34519580 1 Heater element 240V / 1800 Welement only hand-tight



7-14

Water Inlet Sub-Rack Dialog16 34516018 1 Seal for heater element

16 34519378 1 Cylinder for heater element

17 3451662A 1 Isolating transformer

17 34570446 10 Fuse T3.15 A (5 x 20)

18 3451608A 1 Mains transformer



7-15

7.4.1 Upline Tank Dialog7 34560165 1 Upline tank with lid

8 3451604B 1 Level sensor complete with float ball

9 34560246 1 Float ball incl. o-ring the o-ring B must be assembled additionallyduring the assembly of the float ball A

(see figure)

8

9

A

B

7,8,9



7-16

7.5 Water Inlet Sub-Rack Dialog Advanced1 3451727B 1 Throttle 0.4 bar

1 3451664B 1 Throttle 1.3 bar for Dialog with HDF online

1 34570683 20 O-ring 4.47 x 1.78

2 3451902B 1 Solenoid valve 2/2 way coil straight, connector/flange (AKM)


4 34770852 5 O-ring 11.1 x 1.6


6 34516069 1 Throttle 0 - 4 bar


8 34570306 5 Reducer tubing connector

9 34511547 1 Heat exchanger(option)

insulation material and cable ties are obsolete and notrequired after replacement or retrofitting the option


11 34560165 1 Upline tank with lid see separate figure

12 3451604B 1 Level sensor complete see separate figure

13 34560246 1 Float ball see separate figure


14 3477104A 10 O-ring 8.3 x 2.4

15 3451969A 1 Heater element 120V / 1800 W lubricate thread and assemble heater

15 34519580 1 Heater element 240V / 1800 W element only hand-tight

15 34516018 1 Seal for heater element

15 34519378 1 Cylinder for heater element

- 34570292 10 Vibration absorber for RVVB

TSEH

WT

VZ

DMVRVDA

RVVBVB

1 3,4 4,5 3,42

15 14

6 4,54,1098 11 12,13 4,54,5 7



7-17

7.5.1 Upline Tank Dialog Advanced11 34560165 1 Upline tank with lid

12 3451604B 1 Level sensor complete with float ball

13 34560246 1 Float ball incl. o-ring the o-ring B must be assembled additionallyduring the assembly of the float ball A

(see figure)

12

13

A

B

11,12,13



7-18

7.6 DF Sub-Rack Dialog1 3451863B 1 DF distribution manifold (preassembled) with throttle, without

tubing connectorsee separate figure for

single parts

2 - - BICP and KP piston pumps see separate figure forsingle parts

3 - - UF piston pump see separate figure forsingle parts

1 2 3

RVB

BICLF ENDLF PE EKRVE

RVK

RVFPE

FPE EP

BICP KP UFP



7-19

7.6.1 DF Distribution Manifold Dialog1 3477084A 5 Tubing connector ∅ 7 x 1/8" plastic

2 34770852 5 O-ring 11.1 x 1.6

3 3451611B 1 Bicarbonate conductivity sensor

4 34770950 20 O-ring 8.0 x 1.6

5 3451610B 1 END conductivity sensor


7 34511342 1 Glass cylinder

8 34771158 2 Seal

9 34513540 1 Sieve disc

10 34771166 20 O-ring 3.68 x 1.78

11 34516131 1 Pressure sensor - 660 mbar

12 34773762 10 O-ring 9.25 x 1.78

13 34515330 1 Gear pump (Micropump version 1) withmagnet, without motor

14 3451663A 1 Motor

15 34771140 20 O-ring 3.1 x 1.6


17 34570373 10 Plug (long)

18 3477104A 10 O-ring 8.3 x 2.4

BICLF ENDLF

TSBIC

RVE

PE

FPE EP

EK

1,2

1,2

1,23,4 4,5 6 7,8,9,10

11,12

4,13,14

16,17,18 15

16

17

18



7-20

RVB


RVK

RVFPE

FPE EP

19,20,21,22 2,23 1,2 1,224,25 2,26

11,12 7,8,9,10

15,14,136532,1

DF Distribution Manifold Dialog19 34770925 5 Plug

20 34771050 10 Pressure spring 500 mmHg

21 34772928 3 Centre disc

22 34771085 5 Seal

23 34517251 1 Tubing connector ∅ 3.5 x 1/8" plastic

23 34514961 1 Reducer tubing connector ∅ 8 x 1/8" if necessary substitute for tubingconnector A

24 3451664B 1 Throttle 1.3 bar for RVFPE

- 34514953 1 Reducer if necessary insert for RVB

19

22

20

21

2RVB

A



7-21

DF Distribution Manifold Dialog23 34514961 1 Reducer tubing connector ∅ 8 x 1/8" if necessary substitute for tubing

connector A

25 34570683 20 O-ring 4.47 x 1.78

26 3477103A 2 Tubing connector ∅ 3.5 x 1/8" plastic

27 34570381 10 Plug (short)

RVFPE

TSD-S

TSD

2,26 1,2 16,18,27 2,23

2,1 25,24 2,1

A



7-22

7.6.2 Piston Pumps Dialog1 3451749E 1 Piston pump for UF/BICP/KP piston pump. Return valve

additionally necessary for standard UF piston pump.

2 3451789D 1 Piston pump (HDF bagoption)

for HDF bag option.return valve not necessary

3 34519246 1 Reed sensor complete4 34514988 1 Return valve, incl.

2 x tubing clamps,2 x cable ties

return valve RV necessary for standard UFPreplaces one-way bearing 3451754A.

5 34560556 1 Motor for piston pump6 34560572 1 Bell joint for piston pump7 34560602 1 Pump body for piston pump8 34560564 1 Plastic elbow for piston pump- 7703848 1 Assembly jig (motor piston pump) required for motor assembly

1

4

1 1

3 3

B

A

3

2

5

63

7

5

83

7

VBP

VABK1

VABK2

VDABK1

VDABK2

BK1

BK2

MSBK2

MSBK1

VLA

LAFS

FBK2FPA LA

RVFPA

C B

UFPRV

C B

UFPRV



7-23

7.7 DF Sub-Rack Dialog Advanced1 3451863B 1 DF distribution manifold (preassembled) with throttle, without

tubing connectorsee separate figure for

single parts

2 - - BICP and KP piston pump see separate figure forsingle parts

3 - - UF piston pump see separate figure forsingle partsBICP KP UFP


FPE EP

RVFPE

1 2 3

RVB RVK



7-24

7.7.1 DF Distribution Manifold Dialog Advanced1 3451916A 5 Tubing connector ∅ 8 x 1/8" plastic

2 34770852 5 O-ring 11.1 x 1.6

3 3451611B 1 Bicarbonate conductivity sensor

4 34770950 20 O-ring 8.0 x 1.6

5 3451610B 1 END conductivity sensor


7 34511342 1 Glass cylinder

8 34771158 2 Seal

9 34513540 1 Sieve disc

10 34771166 20 O-ring 3.68 x 1.78

11 34516131 1 Pressure sensor - 660 mbar

12 34773762 10 O-ring 9.25 x 1.78


14 3451663A 1 Motor

15 34771140 20 O-ring 3.1 x 1.6


17 34570373 10 Plug (long)

18 3477104A 10 O-ring 8.3 x 2.4

BICLF ENDLF

TSBIC

RVE

PE

FPE EP

EK

1,2

1,2

1,23,4 4,5 6 7,8,9,10

11,12

4,13,14

16,17,18 15

16

17

18



7-25

RVB


RVK

RVFPE

FPE EP

19,20,21,22 2,23 1,2 1,224,25 2,26

11,12 7,8,9,10

15,14,136532,1

DF Distribution Manifold Dialog Advanced19 34770925 5 Plug



22 34771085 5 Seal

23 34517251 1 Tubing connector ∅ 3.5 x 1/8" plastic

23 34514961 1 Reducer tubing connector ∅ 8 x 1/8" if necessary substitute for tubingconnector A

24 3451664B 1 Throttle 1.3 bar for RVFPE

- 34514953 1 Reducer if necessary insert for RVB

19

22

20

21

2

RVB

A



7-26

DF Distribution Manifold Dialog Advanced23 34514961 1 Reducer tubing connector ∅ 8 x 1/8" if necessary substitute for tubing

connector A

25 34570683 20 O-ring 4.47 x 1.78


27 34570381 10 Plug (short)

RVFPE

TSD-S

TSD

2,26 1,2 16,18,27 2,23

2,1 25,24 2,1

A



7-27

7.7.2 Piston Pumps Dialog Advanced1 3451749E 1 Piston pump for UF/BICP/KP piston pump. Return valve

additionally necessary for standard UF piston pump.

2 3451789D 1 Piston pump (HDF bagoption)

for HDF bag option.return valve not necessary

3 34519246 1 Reed sensor complete4 34514988 1 Return valve, incl.

2 x tubing clamps,2 x cable ties

return valve RV necessary for standard UFPreplaces one-way bearing 3451754A.

5 34560556 1 Motor for piston pump6 34560572 1 Bell joint for piston pump7 34560602 1 Pump body for piston pump8 34560564 1 Plastic elbow for piston pump- 7703848 1 Assembly jig (motor piston pump) required for motor assembly

1

4

1 1

3 3

B

A

3

2

5

63

7

5

83

7

VBP

VABK1

VABK2

VDABK1

VDABK2

BK1

BK2

MSBK2

MSBK1

VLA

LAFS

FBK2FPA LA

RVFPA

C B

UFPRV

C B

UFPRV



7-28

FPA

RVFPA

LA

VBPVLA

DDE

1 2

V FPA Z RVDA

VABK1

VEBK2 VEBK1

VABK2

V FPE Z DDE

VABK2

VABK1

VEBK2

VEBK1

VDABK1

VDABK2

VDEBK1

VDEBK2MSBK2 MSBK1

7.8 UF Sub-Rack Dialog1 - - Balance chamber 1 see separate figure

2 - - Air separator complete see separate figure



7-29

FPA

DDE

RVFPA

VBP

VLA

LA

1,2 3,4 2,5 2,6 4,7 8 9

10

7.8.1 Air Separator Assembly Group Dialog1 3477084A 2 Tubing connector ∅ 7 x 1/8" plastic

2 34770852 5 O-ring 11.1 x 1.6

3 3451727B 1 Throttle 0.4 bar

4 34570683 20 O-ring 4.47 x 1.78





9 3451663A 1 Motor

10 3456018A 1 Housing with lid (air separator)

10 34560190 1 Lid (air separator)



7-30

VABK2

VABK1

VEBK2

VEBK1

VDABK1

VDABK2

VDEBK1

VDEBK2MSBK2 MSBK1

1 2,3 4 2,3 1

2,3 2,35,3

V FPA Z RVDA

VABK1

VEBK2 VEBK1

VABK2

V FPE Z DDE

7.8.2 Balance Chamber 1 Dialog1 34519092 1 Coil

1 34770976 10 O-ring 15.6 x 1.78


2 34517987 1 Distance piece with 2 x O-ring 11.1x 1.6 and 2 x screw M4 x 4.5

necessary for the assembly of thesolenoid valves VDABK1/2,

VDEBK1/2, VABK1/2

3 34770852 5 O-ring 11.1 x 1.6

4 3451897A 1 Repair kit balancechamber

for the complete replacement of both membranes,incl. all o-rings and assembly parts

(self-locking nuts, screws, springs etc.)

4 3451615A 2 Membrane for balance chamber


6 3451665A 2 Membrane position sensor board exchange as pair only

- 34570195 20 Tubing clamp SNP-1.5 ∅ 7-8mm plastic

- 34570209 20 Tubing clamp SNP-4 ∅ 10-11mm plastic

6 6



7-31

VEBK1

VEBK2VABK2 VDABK1

FPA

RVFPA

LA

VBPVLA

DDE

MSBK2

MSBK1

VABK1

VDEBK2

VDEBK1

3

4

4

5

1,2

7.9 UF Sub-Rack Dialog Advanced1 3451902B 1 Solenoid valve 2/2 way manuf. AKM only, coil straight, connector/flange

2 34770852 5 O-ring 11.1 x 1.6

3 - - Air separator complete see separate figure

4 3451906C 1 Solenoid valve 2/2 way manuf. AKM only, coil straight,connector/connector

5 - 1 Balance chamber 2 see separate figure



7-32

FPA

DDE

RVFPA

VBP

VLA

LA

1,2 3,4 2,5 2,6 4,7 8 9

10

7.9.1 Air Separator Assembly Group Dialog Advanced1 3451916A 5 Tubing connector ∅ 8 x 1/8" plastic

2 34770852 5 O-ring 11.1 x 1.6


4 34570683 20 O-ring 4.47 x 1.78





9 3451663A 1 Motor

10 3456018A 1 Housing with lid (air separator)

10 34560190 1 Lid (air separator)



7-33

7.9.2 Balance Chamber 2 Dialog Advanced1 3451902B 1 Solenoid valve 2/2 way manuf. AKM only, coil straight, connector/flange

2 34770852 5 O-ring 11.1 x 1.6

3 3451897A 1 Repair kit balancechamber

for the complete replacement of both membranes,incl. all o-rings and assembly parts (self-locking nuts,

screws, springs etc.)

3 3451615A 2 Membrane for balance chamber

4 34519092 1 Coil

4 34770976 10 O-ring 15.6 x 1.78

5 3451906C 1 Solenoid valve 2/2 way manuf. AKM only, coil straight,connector/connector

6 3451665A 2 Membrane position sensor board exchange as pair only



VEBK1

VEBK2

VABK2 VDABK1

MSBK2

MSBK1

VABK1

VDEBK2

VDEBK1

1,2

3

1,2

4

5

4

5

6 6



7-34

7.10 Top Level Sub-Rack7.10.1 Motherboard POS-460

1 34519416 1 Supervisor communication board (SCB)2 - - Motherboard POS-460

all-in-one Rev B1is replaced by retrofit kit POS-460 – GX1LCD

see paragr. 7.10.2 for GX1LCD motherboard

2 34519327 1 Battery BR2032, 3V for motherboard POS-460 all-in-one Rev B1

2 34519319 1 Battery (rechargeable) 3.6V for motherboard POS-460 all-in-one

2 34519963 1 SIM module 32 MB for motherboard POS-460

2 3451404A 1 MotherboardGX1LCD

Ex works the BIOS of the GX1LCD is set toBIOS version 1.9 (for SW ≥ 7.58)

The BIOS for Dialog/Dialog Advanced machines must beset to BIOS version 1.8

- 34514694 1 Retrofit kit POS-460 – GX1LCDincluding:BIOS must be changed to version 1.8 for DialogAdvanced machines.• Sub-rack• GX1LCD motherboard• Adapter RS-232 (for COM3)• SC board adapter loudspeaker/GX1LCD• Cable harness for voltage supply• Assembly material

SW update required:• from 3.46 to 3.48• from 5.35 to 5.36

Must be ordered additionally.

- 34514813 1 Adapter RS-232

- 34514821 1 DCI cable, internal

3 3451458A 1 Hard disk drive 40 GB for SW ≥ 3.46

4 34517952 1 SC board adapter additional amplifier for monitorloudspeaker

4 34514708 1 SC board adapterloudspeaker/GX1LCD

for supervisor communicationboard index < F

- 34517472 1 Fan for CPU

- 34516662 1 Floppy disk drive 3.5"

• After replacement of the hard disk drive: the respective TLC software has to be installed(not included in delivery).

SupervisorCommunication

Board SCB

MotherboardGX1LCD

FDD

HDD

VGACable

34

1 2

HDD

SCBAdapter



7-35

7.10.2 Motherboard GX1LCD1 34519416 1 Supervisor communication board (SCB)2 3451404A 1 Motherboard

GX1LCDEx works the BIOS of the GX1LCD is set to

BIOS version 1.9 (for SW ≥ 7.58)The BIOS for Dialog/Dialog Advanced machines must be

set to BIOS version 1.8

2 34514791 1 SODIM module 64 MB for motherboard GX1LCD

2 34519327 1 Battery BR2032, 3V for motherboard GX1LCD

3 3451458A 1 Hard disk drive 40 GB for SW ≥ 3.46

4 34514708 1 SC board adapter loudspeaker/GX1LCD

5 34516662 1 Floppy disk drive 3.5"

• After replacement of the hard disk drive: the respective TLC software has to be installed(not included in delivery).

SupervisorCommunication

Board SCB

MotherboardGX1LCD

FDD

HDD

VGACable

34

1 2

HDD

SCBAdapter

Floppy Disk Drive FDD

Red dot conductor 1Roter Farbpunkt Ader 1

45



7-36

PB2 PB1

1,2

3

45

6

8

7

3

Supervisor Board SB

Controller Board CB

7.11 Rear Door- 34519610 1 Internal cover rear door for Dialog

- 39410668 1 Cap ∅ 34 mm for internal cover Dialog

- 34560424 1 Internal cover rear door for Dialog Advanced

- 39410625 1 Cap ∅ 44 mm for internal cover Dialog Advanced

1 3451059A 1 Mains switch

2 34770003 5 Protection cap for mains switch

3 34517610 1 Fan 80 x 80 mm with connector

3 34570284 5 Dust filter

Power Boards PB

4 34519424 1 Power board 1 version 2 see 7.11.1

5 34519432 1 Power board 2 version 2 see 7.11.1

5 34519440 1 Power board 2 version 2 for HDF bag, see 7.11.1

Supervisor Boards SB

6 3451499B 1 Supervisor board version 3 for mains power supply (Ascom/Delta)

6 3451461A 1 Supervisor board version 3 for SMPS (Benning)

Controller Boards CB

7 3451627E 1 Controller board 1 MB

7 3451921B 1 Controller board 2 MB for SW ≥ 4.00

Mains Power Supplies

8 - - Mains power supplies see separate figures



7-37

Rear Door9a - 1 Tubing holder/fan cover replaced by 3451441A

9b 3451441A 1 Tubing holder/fan cover 9b replaces 9acompatible to crank 10a/10b

10a 34518355 1 Crank for blood pump compatible to tubing holder 9a/9b

10b 34560157 1 Crank for blood pump compatible to tubing holder 9b

9a

9b

10a

10b



7-38

7.11.1 Compatibility Table for BoardsArt. No. Dialog

(Power SupplyAscom/Delta)

Dialog(HDF Online +PowerSupply Ascom/Delta)

Dialog AdvancedSMPS

(Benning)

Dialog+SMPS

(Benning)

Supervisor Communication SC Board Version 2(with SMD potentiometer for volume)

34519416(3810801X)

X X X NA

Power Board 1 Version 2 34519424(3810808X)

X X X X

Power Board 2 Version 2(for piston pumps)

34519432(3810809X)

X X X -

Power Board 2 HDF Version 2(for HDF bag)

34519440(3810813X)

X(HDF bag)

- X(HDF bag)

-

Power Board 2 Version 3(for SAKV-SG)

34514201 old 34514210(3810840X) (3810834X)

- - - X

Power Board 2 HDF Version 3(for HDF bag)

34514236(3810841X)

- - - X(HDF bag)

BIC-KV Board Version 2(for BIC cartridge holder)

34560149 old 34519467(38108625) (3810811X)

X X X X

HOP Board Version 2(for HDF online)

34519475(3810812X)

- X(HDF online)

X(HDF online)

X(HDF online)

SN Board Version 2 34560076 old 3451945A(3810862X) (3810810X)

X X X X

MSBK Board 3451665A old 34516654(3810814X) (3810671X)

X X X X

Controller Board 1 MB 3451627E old 3451627D(3810842X) (3810645X)

X - - -

Controller Board 2 MB 3451921B(3810843X)

X(≥ 5.XX)

X X X

Supervisor Board Version 3(for mains power supply Ascom/Delta)

3451499B (old 3451952X, version 2)(38108601) (3810818X)

X X - -

Supervisor Board Version 3(for switch mode power supply SMPS Benning)

3451461A (old 3451951X, version 2)(38108600) (3810817X)

- - X X

• After the replacement of a supervisor or controller board: the LLS or LLC software must be reinstalled if the LLS or LLC software does not match with the software version in the machine. These boards are always delivered withthe latest LLS/LLC software versions!

• You will require the bootloader version 0.07 for the supervisor board for SMPS because the board is delivered with the latest LLS software, e.g. software 8.2X for Dialog+!



7-39

7.11.2 Mains Power Supply (Ascom/Delta) Dialog1 719259B 1 Mains power supply (230/240 V~) refurbished part

1 3451758A 1 Mains power supply (110/120 V~) discontinued

1 719260A 1 Mains power supply (110/120 V~) refurbished part

SI1/2 34570179 10 Fuse M10 A (6.3 x 32 mm)

SI3/4 34570144 10 Fuse T0.05 A (TR5)

SI5/6 34570101 10 Fuse T6.3 A (5 x 20 mm)

SI7/8 34570136 10 Fuse T15 A (6.3 x 32 mm)

SI9/10 34570128 10 Fuse T10 A (6.3 x 32 mm)

SI11/12 34570160 10 Fuse T3.15 A (TR5)

SI14 34570101 10 Fuse T6.3 A (5 x 20 mm)

SI15/16 34570098 10 Fuse T5 A (5 x 20 mm)

SI22-27 34570071 10 Fuse T4 A (TR5)

1 34570152 10 Fuse T0.1 A (TR5)

1 34570063 10 Fuse T2 A (TR5)

1 34570080 10 Fuse T4 A (5 x 20 mm)

1 34771310 10 Fuse T6.3 A (6.3 x 32 mm)

1 34570110 10 Fuse T10 A (5 x 20 mm)

1 34771328 10 Fuse F12 A (6.3 x 32 mm)

1 34570187 10 Fuse F20 A (6.3 x 32 mm)

K5/K6 34560262 2 Relay (12 V) for Ascom/Delta

K1 34560254 1 Relay (heater) for Ascom/Delta

C18/C60 34519912 2 Capacitor 1F

H1 34519971 1 Buzzer

K6K5

K1

H1

C60 C18

1



7-40

7.11.3 Switch Mode Power Supply SMPS (Benning) Dialog Advanced1 3451474B 1 Switch mode power supply SMPS version

12see table 7.11.3.1

1 719287B 1 Switch mode power supply SMPS version12

refurbished part,see table 7.11.3.1

F1/F2 34570462 10 Fuse T6.25 A (6.3 x 32 mm)

F3/F4 34570160 10 Fuse T3.15 A (TR5)

F5/F6 34771328 10 Fuse F12 A (6.3 x 32 mm) for 230 V

F5/F6 34570187 10 Fuse M20 A (6.3 x 32 mm) for 110/120 V

F301 34570160 10 Fuse T3.15 A (TR5)

F302 34570470 10 Fuse T5 A (TR5)

F303 34570160 10 Fuse T3.15 A (TR5)

F304 34570160 10 Fuse T3.15 A (TR5)

F401 34570160 10 Fuse T3.15 A (TR5)

F402 34570470 10 Fuse T5 A (TR5)

F403 34518819 10 Fuse T1.25 A (TR5)

F600 34570179 10 Fuse M10 A (6.3 x 32 mm)

F601 34570160 10 Fuse T3.15 A (TR5)

F602 34570160 10 Fuse T3.15 A (TR5)

K3/K4 34514775 2 Relay (12 V) for 24 V

C114/C115 34519912 2 Capacitor 1F

H104 34560580 1 Buzzer

P7

P8

P101X100

P2

P13

P9

+-P3

P5

P4

P10

P12F401

F402

F403

F303

F304

F6

F3F4

F1 F2

F5

X3X1

X2PE3 N3 L3 N2 L2

PE L N PE L1 N1X1.3 X1.1 X1.2 X1.6 X1.5 X1.4

F302

F301

K4K3

C115

C114

H104

F602

F601

TypeSNTN/PN XXXXXX 11Opt.

Art/KindHzVA

1



7-41

Switch Mode Power Supply SMPS (Benning) Dialog Advanced

7.11.3.1 Compatibility Table SMPS (Benning)SMPS Type Plate (TN/PN) Dialog Advanced Dialog+

719284(≤ B) (revision ≤ 8) XXXXXX≤8 X -

3451957(C/D)/719284(C/D) (revision 9/10) XXXXXX9/10 X X

34514740(A)/7192878(A) (Revision 11) XXXXXX≥11 X X

3451474B/719287B (Revision 12) XXXXXX≥12 X Xex works

P7

P8

P101X100

P2

P13

P9

+-P3

P5

P4

P10

P12F401

F402

F403

F303

F304

F6

F3F4

F1 F2

F5

X3X1

X2PE3 N3 L3 N2 L2

PE L N PE L1 N1X1.3 X1.1 X1.2 X1.6 X1.5 X1.4

F302

F301

K4 K3

C115

C114

H104

F602

F601

TypeSNTN/PN XXXXXX 11Opt.

Art/KindHzVA



7-42

7.12 Front Door Dialog1 34516352 1 Pressure sensor

2 3457058A 5 Manometer connection (white) with plastic nut A and

2 3451833A 5 Manometer connection (red) safety disc B (pay attention to

2 3451884A 5 Manometer connection (blue)correct assembly, see left figure)

3 39971260 m PUR tubing 3.6 x 1.1 for manometer connection (filter)

4 34516409 1 Filter

5 3451711F 1 Blood pump without roller

5 719262F 1 Blood pump without roller refurbished part

6 34516689 1 Roller 8x12 for blood pump

7 3451669E 1 Cover for blood pump cover without threadfor hinge pin with interior thread

7a 34560025 1 Magnet ∅ 5 mm see paragraph 7.13

7b 34560033 1 Metal disc ∅ 10 mm see paragraph 7.13

7 3451981E 1 Cover for blood pump (upgradekit)

cover without threadincl. hinge pin with interior thread

8 34519823 2 Hinge pin with interior thread for cover without thread

8 34517758 2 Hinge pin for cover with thread

- 7702736 1 Extraction tool for hinge pin with interiorthread

toolfor cover without thread

9 3451708D 1 Red detector board with housing

10 34516670 1 Seal for blood pump

11 34517138 1 Reed sensor with contacts and o-ring 3.68 x 1.78

12 34560076 1 Single needle board incl. ribbon cablex

13 34570616 5 Latch

SAKASAKV

PV PA

BPA BPV

PBS/SN PBE

HP

SADRDV

V A

1,2,3,45,6,7,8,9,10,11,12

1314,15,16 17,18

1,2,3,4 1,2,3,4

17,18

19

222120

23

24

25

26

Pos. 2

AB



7-43

Front Door Dialog14 - - ABPM module M2000 without

interface boardreplaced by ABPM module M2005,

see 7.28.2 for details

15 34514147 1 ABPM interface board M2000 for ABPM module 2000

15 34518525 1 ABPM interface board M1050 for ABPM module 1050

16 34518517 1 Coupling (ABPM) for pressure tubing

17 34570535 1 Single tubing holder ∅ 6,8 mm

18 34570543 1 Double tubing holder ∅ 6,8 mm

19 34570560 1 Single tubing holder ∅ 6 mm

20 3451632B 1 Heparin pump Comfort complete

21 34517057 1 Seal for housing heparin pump

22 34517090 1 Potentiometer for syringe detection

23 34570578 1 Cover for tubing holder SAKA/SAKV

23 3456000A 1 Rotary magnet complete

24 3456005C 1 SAD version 3 with red detector

25 34570527 1 Single holder, small

26 34570551 1 Double holder, big

26 34570519 1 Single holder, big

TP4

TP6

TP2TP1 R3 C1

V1

SAKA SAKV

SADRDV

HP

PBE

BPV BPA

PA PV

1,2,3,4 1,2,3,4 1,2,3,4 1,2,3,414,15,16

9

24

23

20

21

22

11

12

PBS/SN



7-44

7.13 Front Door Dialog Advanced1 34516352 1 Pressure sensor

2 3457058A 5 Manometer connection (white) with plastic nut A and

2 3451833A 5 Manometer connection (red) safety disc B (pay attention to

2 3451884A 5 Manometer connection (blue)correct assembly, see left figure)

3 39971260 m PUR tubing 3.6 x 1.1 for manometer connection (filter)

4 34516409 1 Filter

5 3451711F 1 Blood pump without roller

5 719262F 1 Blood pump without roller refurbished part

6 34516689 1 Roller 8x12 for blood pump

7 3451669E 1 Cover for blood pump cover without thread (see separate figure), forhinge pin with interior thread

7a 34560025 1 Magnet ∅ 5 mm for cover

7b 34560033 1 Metal disc ∅ 10 mm for cover

7 3451981E 1 Cover for blood pump(upgrade kit)

cover without thread (see separate figure), incl.hinge pin with interior thread

8 34519823 2 Hinge pin with interior thread for cover without thread

8 34517758 2 Hinge pin for cover with thread

- 7702736 1 Extraction tool for hinge pin with interiorthread

toolfor cover without thread

9 3451708D 1 Red detector board with housing

10 34516670 1 Seal for blood pump


12 34560076 1 Single needle board incl. ribbon cablex

13 34570616 5 Latch

SAKV SAKA

HP

BPA BPV

PBS/SNPAPV PBE

SN SN

RDA

SADRDV

V A

20ml 30m

l 10ml

1,2,3,45,6,7,8,9,10,11,12 14,15

1,2,3,4 1,2,3,4

20

14,15

16

18

17

19

21

13

Pos. 2

AB



7-45

23

24

25

Front Door Dialog Advanced14 34570535 1 Single tubing holder ∅ 6,8 mm

15 34570543 1 Double tubing holder ∅ 6,8 mm

16 34570560 1 Single tubing holder ∅ 6 mm

17 3451432B 1 Heparin pump Compact

17a 34514732 1 Syringe holder

17b 34570640 5 Dummy plug

17c 34570667 1 Clamp

17d 34570659 1 Unlocking lever set

18 34570578 1 Cover for tubing holder SAKA/SAKV

18 3456000A 1 Rotary magnet complete

19 3456005C 1 SAD version 3 with red detector

20 34570527 1 Single holder, small

21 34570551 1 Double holder, big

21 34570519 1 Single holder, big

22 34519734 1 SAKV-SG board SAKV-SG currentless closed option

23 34771166 20 O-ring 3.68 x 1.78 SAKV-SG currentless closed option

24 34519742 1 Rotary magnet with mechanicallocking

SAKV-SG currentless closed option

24 34514317 1 Cover for tubing holder SAKA-SG SAKV-SG currentless closed option

SADRDV

SAKVSAKA

HP

RDA

BPABPV

PBS/SN PA PVPBE

1,2,3,4 1,2,3,4 1,2,3,4

9

19

18

17

11

12

7

7b

7a5a 5b 5c 5d17a 17b 17c 17d



7-46

1

3

2

5

6

4

10

8

7

9

7.14 Basic Housing Dialog1 3451716A 1 Infusion pole version 1 height adjustable

2 3451439A 1 Holder, top

3 3451854A 1 Holder pole

4 3451438A 1 Holder, bottom

5 34511628 1 Mains cord, without connector 230/240 V

5 34518029 1 Strain relief

6 34514724 1 Interference filter

7 34517804 1 Front panel, bottom

8 - 1 Base platform with raised platform replaced by pos. 11

9 34517723 1 Swivel caster grey


11 34519335 1 Retrofit kit base platform complete withcasters

11 34519564 1 Silicone profile

12 34519343 1 Swivel caster

12 34519351 1 Swivel caster with brake

11

12



7-47

7.14.1 Concentrate Suction Rods Dialog1 3451726A 1 Feed-through connector

2 39972011 m Silicone tubing 3.3 x 2.85 per meter (transparent)

3 34517782 5 Disposable filter

4 39972313 m Silicone tubing 5 x 1.5, blue per meter

5 39972305 m Silicone tubing 5 x 1.5, red per meter

6 34514597 1 Suction coupling for central concentrate supply

6 34570438 5 O-ring 8.0 x 1.25

7 3451654A 1 Suction rod complete for central concentrate supply

7 34514651 2 Suction nipple with o-rings 9.3 x 2.4

8 34514759 1 Male connector (blue) with o-rings

8 34519939 1 Suction rod complete, blue

9 34514767 1 Male connector (red) with o-rings

9 34519920 1 Suction rod complete, red

10 34570004 5 O-ring 9.3 x 2.4

11 39971414 m Silicone tubing 3.2 x 1.6 per meter

12 3451728A 1 PE tube 4 x 1 with silicone tubing

2

3

1

45

76

109

11

12

8



7-48

DialysateDialysat

WaterWasser

1

2

3

4,5,65,6,7

7.14.2 Rinsing Chambers for Concentrate Suction Rods Dialog1 3451774A 1 Cover for concentrate supply

1 3451643A 1 Retainer for suction rod


2 34514678 1 Connection nipple central concentratesupply (option)

2 34570004 5 O-ring 9.3 x 2.4 central concentratesupply (option)

3 34514597 1 Suction coupling for central concentratesupply

3 34570438 5 O-ring 8.0 x 1.25

4 34515186 1 Tubing connector ∅ 11 x 1/8" plastic, for dialysateoutlet (standard)

4 3477084A 5 Tubing connector ∅ 7 x 1/8" plastic, for dialysateoutlet (option)

5 34770852 5 O-ring 11.1 x 1.6

6 34771271 10 Tubing clamp 15/9

7 34515194 1 Tubing connector ∅ 11 x 1/8" stainless steel, for waterinlet (standard)

7 34517243 1 Tubing connector ∅ 7 x 1/8" stainless steel, for waterinlet (option)

- 34515143 m PVC tubing 10 x 3, red per meter (for waterinlet)

34565140 50m PVC tubing 10 x 3, red 50 meter (for waterinlet)

- 34515151 m PVC tubing 10 x 3, black per meter (for dialysateoutlet)

34565159 50m PVC tubing 10 x 3, black 50 meter (for dialysateoutlet)



7-49

BL

VD

6 7,8

10,9,813,12,11

VDE VDA

1,2 2,3 4 5

Blue

to Dialyser

from Dialyser

Red

7.14.3 Rinsing Bridge 1 Dialog1 3451445A 1 Dialyser coupling, red

2 34990445 5 O-ring for dialyser coupling

3 3451446A 1 Dialyser coupling, blue

4 34773550 20 Membrane for dialyser coupling

5 39236315 m Silicone tubing 5 x 3 per meter



8 34770852 5 O-ring 11.1 x 1.6

9 34517251 1 Tubing connector ∅ 3.5 x 1/8" stainless steel

10 34517294 1 Suction set with tubing, suction port and black lid for disinfection

10 34514562 1 Suction set with tubing, suction port and yellow lid for disinfection

10 8903409 m PVC tubing 3.5 x 1 for disinfection, per meter

10 34512675 1 Suction port for suction tubing

11 34511792 1 Tubing coupling


13 34771255 20 O-ring 14 x 1.5

14 34773762 10 O-ring 9.25 x 1.78

14



7-50

1 2 3 4 5 6

4321

Rinsing Bridge 1 Dialog- 3451898A 1 Repair kit rinsing bridge for the complete replacement of all

small parts in the disinfection valve

1 34570012 10 O-ring 2.7 x 1.5 for valve tappet

2 34517332 2 Pressure spring for valve tappet

3 3477106A 5 O-ring 6.4 x 1.3 for cover valve tappet

4 34517324 2 Valve tappet for VD

5 34570457 10 O-ring 5.0 x 1.6 for eccecntric shaft

6 3451659D 1 Servomotor with board for VD,servomotor and board must be

exchanged together



7-51

Rinsing Bridge 1 Dialog1 3477103A 2 Tubing connector ∅ 3.5 x 1/8" plastic

2 34770852 5 O-ring 11.1 x 1.6






8 3451659D 1 Servomotor with board for VD


10 3451657B 1 Pressure sensor PDA

11 34773762 10 O-ring 9.25 x 1.78

12 3451656E 1 Blood leak detector 1 complete < SW 3.46 with potentiometer

12 3451894C 1 Blood leak detector 3 complete with Adapter for rinsing bridge 1,SW ≥ 3.46

12 3451908C 1 Blood leak detector 3 replaces version 2, only if BLD with adapter isalready present

13 34770976 10 O-ring 15.6 x 1.78

14 34770950 20 O-ring 8.0 x 1.6

15 3477106A 5 O-ring 6.4 x 1.3 for cover screw blood leak detector



18 34771255 20 O-ring 14 x 1.5

19 34516506 1 Rinsing bridge 1 without blood leak detector, pressure sensor, solenoidvalve, servomotor, fork light barrier and seal cord

20 34773762 10 O-ring 9.25 x 1.78

VD

PDAVDE VDA

BL

1,23,4,5,6,7,8

2,9 10,112,9

12,13,14,15

18,17,161920



7-52

VDE

PDABL

VD

12,13,14,15 2,9 10,11 2,9 3,4,5,6,7,8

192023,22,21

VDA

Rinsing Bridge 1 Dialog20 34516603 1 Fork light barrier for servomotor

21 34770852 5 O-ring 11.1 x 1.6


23 34517294 1 Suction tubing, suction port and lid (black) for disinfection



7-53

Floppy Disk Drive FDD

Red dot conductor 1Roter Farbpunkt Ader 1

9

12,11,10

1

2

3

6

5

4

7

8

7.15 Basic Housing Dialog Advanced1 3451962A 1 Infusion pole version 2 height adjustable


3 3451438A 1 Holder, bottom

4 34511628 1 Mains cord, without connector 230/240 V

4 34518029 1 Strain relief

5 34514724 1 Interference filter

6 34517804 1 Front panel, bottom

7 34519335 1 Retrofit kit base platform complete withcasters

7 34519564 1 Silicone profile

8 34519343 1 Swivel caster

8 34519351 1 Swivel caster with brake


10 34514147 1 ABPM interface board M2000 for ABPM module 2000see 7.28.2 for details

11 - - ABPM module M2000 withoutinterface board

replaced by ABPM moduleM2005, see 7.28.2 for details

11 34519807 1 Assembly bracket incl. assemblymaterial

to exchange an ABPM module M1050against ABPM module 2000

12 3451487A 1 ABPM module M2005 (integratedinterface board) incl. assembly angle

see 7.28.2 for detailsbackwards compatible to

M2000/M1050

- 34518525 1 ABPM interface board M1050 for ABPM module 1050

- 34518517 1 Coupling (ABPM) for pressure tubing

R5

R6

R7

10 11

12



7-54

7.15.1 Concentrate Suction Rods Dialog Advanced1 3451726A 1 Feed-through connector

2 39972011 m Silicone tubing 3.3 x 2.85 per meter (transparent)


4 39972313 m Silicone tubing 5 x 1.5, blue per meter

5 39972305 m Silicone tubing 5 x 1.5, red per meter


6 34570438 5 O-ring 8.0 x 1.25

7 3451654A 1 Suction rod complete for central concentrate supply

7 34514651 2 Suction nipple with o-rings 9.3 x 2.4

8 34514759 1 Male connector (blue) with o-rings

8 34519939 1 Suction rod complete, blue

9 34514767 1 Male connector (red) with o-rings

9 34519920 1 Suction rod complete, red

10 34570004 5 O-ring 9.3 x 2.4

11 39971414 m Silicone tubing 3.2 x 1.6 per meter

12 3451728A 1 PE tube 4 x 1 with silicone tubing

2

3

1

45

76

109

11

12

8



7-55

7.15.2 Rinsing Chambers for Concentrate Suction Rods DialogAdvanced

1 3451774A 1 Cover for concentrate supply

1 3451643A 1 Retainer for suction rod


2 34514678 1 Connection nipple central concentratesupply (option)

2 34570004 5 O-ring 9.3 x 2.4 central concentratesupply (option)


3 34570438 5 O-ring 8.0 x 1.25

4 34515186 1 Tubing connector ∅ 11 x 1/8" plastic, for dialysateoutlet (standard)

4 3477084A 5 Tubing connector ∅ 7 x 1/8" plastic, for dialysateoutlet (option)

5 34770852 5 O-ring 11.1 x 1.6

6 34771271 10 Tubing clamp 15/9

7 34515194 1 Tubing connector ∅ 11 x 1/8" stainless steel, for waterinlet (standard)

7 34517243 1 Tubing connector ∅ 7 x 1/8" stainless steel, for waterinlet (option)

- 34515143 m PVC tubing 10 x 3, red per meter (for waterinlet)

34565140 50m PVC tubing 10 x 3, red 50 meter (for waterinlet)

- 34515151 m PVC tubing 10 x 3, black per meter (for dialysateoutlet)

34565159 50m PVC tubing 10 x 3, black 50 meter (for dialysateoutlet)

DialysateDialysat

WaterWasser

1

2

3

4,5,65,6,7



7-56

VD

Blue

to Dialyser

from Dialyser

Red

1,2 2,3 4 5

67,8

10,9,813,12,11

VDE

7.15.3 Rinsing Bridge 2 Dialog Advanced1 3451445A 1 Dialyser coupling, red

2 34990445 5 O-ring for dialyser coupling



5 39236315 m Silicone tubing 5 x 3 per meter


7 3451902B 1 Solenoid valve 2/2 way coil straight, connector/flange

8 34770852 5 O-ring 11.1 x 1.6


10 34517294 1 Suction set with tubing, suction port and black lid for disinfection

10 34514562 1 Suction set with tubing, suction port and yellow lid for disinfection

10 8903409 m PVC tubing 3.5 x 1 for disinfection, per meter

10 34512675 1 Suction port for suction tubing



13 34771255 20 O-ring 14 x 1.5

14 34773762 10 O-ring 9.25 x 1.78

14



7-57

1 2 3 4 5 6

4321

Rinsing Bridge 2 Dialog Advanced- 3451898A 1 Repair kit rinsing bridge for the complete replacement of all

small parts in the disinfection valve






6 3451659D 1 Servomotor with board for VD,servomotor and board must be

exchanged together



7-58

Rinsing Bridge 2 Dialog Advanced1 3451908C 1 Blood leak detector 3 replaces version 2

2 3451902B 1 Solenoid valve 2/2 way coil straight, connector/flange

3 34770852 5 O-ring 11.1 x 1.6

4 3451657B 1 Pressure sensor PDA

5 34773762 10 O-ring 9.25 x 1.78






11 3451659D 1 Servomotor with board for VD

12 34519033 1 Rinsing bridge 2 housing

13 34516603 1 Fork light barrier for servomotor



16 34771255 20 O-ring 14 x 1.5

17 34773762 10 O-ring 9.25 x 1.78

PDABL

VDE

VD

1 2,3 4,5 6,7,8,9,10,11

1213

VDPDA

VDE

BL

4,5 2,3

16,15,14

16,7,8,9,10,11

17



7-59

7.16 Colour Monitor1 34518100 1 Loudspeaker

2 34517610 1 Fan 80 x 80 mm with connector

3 3451855B 1 Colour monitor chassis with CRT,electronics and cable

without housing

4 34518568 1 Keyboard

- 34519360 1 Repair kit monitor cable for monitor type14HC4AA4 consisting of:1 x VGA cable1 x Ribbon cable



21 3 4



7-60

Colour Monitor5 34517847 1 Glass touch screen

6 34518720 1 Keyboard membrane for SW ≥ 3.46

-

+STARTSTOP

5 6



7-61

7.17 Test and Calibration Equipment and Tools

Inspection for Calibration Equipment# Calibration equipment is subject to inspection and

must be checked and calibrated in regular intervals.# 7701357 1 Manometer 0-4 bar

# 34511571 1 Manometer 2.5 bar

- 770085A 1 Flow meter 1.1 l/min

- 7700911 1 Reference solution (red) for calibration blood leak detector

# 7702493 1 Template 1.4/1.5 for tubing clamp

# 7702027 1 Template 1.5/1.6 for SAKV option

# 7701543 1 Potentiometer template 20 ml for heparin pump Comfort

# 7701551 1 Potentiometer template 50 ml for heparin pump Comfort

- 7701667 1 Service board for power supply (Ascom/Delta)for watchdog generation and voltage

check of power supply

- 7702655 1 Service board SMPS for switch mode power supply SMPSfor watchdog generation and voltage

check of power supply

- 34518614 1 Program adapter for memory card

- 7703503 1 Bootloader version 0.07 Bootloader for supervisor board for Dialog/DialogAdvanced and Dialog+. Is backward compatible to

old bootloader and replaces art. no. 34518584

- 34518592 1 Supervisor communication program adapterSCB-S 1.03

for HDF option

- 34518738 1 Supervisor communication program adapterSCB-C 2.05/SCB-S 2.12

for SW ≥ 3.46



7-62

Test and Calibration Equipment and Tools# - - Dialysis measurement

instrument HDM 99XPFor example manufacturer:IBP Instruments GmbHInternet: www:ibpmt.com

for temperature, conductivity,flow and pressure measurement

for details contact manufacturer directly

# - - Secutest SIIIFor example manufacturer:GMC Instruments GroupInternet: www:gmc-instruments.com

for electrical safety checkaccording to EN 60601-1/IEC 601-1

for details contact manufacturerdirectly

- - - Balance (e.g. Pocket Balance)For example manufacturer:Kern & Sohn GmbHInternet: www:kern-sohn.com

for calibration of UFP, BICP and KPfor details contact manufacturer

directly

- 770284A 1 DCI cable, external for HDM 99 RS 232 interface

- 7701756 1 Extraction tool set (AMP)

# 7701713 1 Calibration weight (10 kg) with marked weight for calibrationof the load cell

# 7701861 1 Graduated cylinder 250 ml

# 7702302 1 Volumetric flask 500 ml for the calibration of the pistonpump/HDF option

- 7702310 10 Syringe 1 ml for the calibration of the piston pump only/HDF optionNot for medical use!

- 7702736 1 Extraction tool for hinge pinwith interior thread

for cover without thread (blood pump)

- 770203A 1 Stopcock system with fivestopcocks, incl. lines

for the combined calibration of thepressure sensors (5 x original Perfusor

lines 50 cm

- 7703090 1 Measurement chamber 500 ml for function testABPM module

7703848 1 Assembly jig (motor for pistonpump)

for assembly motor for piston pump



7-63

Test and Calibration Equipment and Tools- 7701497 1 Special socket spanner ∅ 18 mm for assembly of MFC socket

- 7107232 1 External MFC/LAN connectioncable

for network

- 7703589 1 Crossover cable RJ45 for network

- 7703597 1 Coupling (female/female) RJ45 for network

- 7703635 1 Extension cable D-sub 9 pin (male/female) for network

- 7703643 1 Chip card for BSL-Nexadia for network

- 7703473 1 Test plug RS 232 for network

- 7703805 1 Male to male connector Adapter to connect both dialysercouplings for the measurement of the

patient leakage current



7-64

7.18 Service Kits- 7703058 1 Assembly kit for glass touch screen

- 3451898A 1 Repair kit rinsing bridge for the complete replacementof all small parts in the

disinfection valve

- 3451893C 1 Maintenance kit Dialog/Dialog Advanced/Dialog+consisting of:6 x Disposable filter for FVD, FB, FK, FBK1, FBK2, FBIC2.1 m Dialyser tubing (silicone tubing 5 x 3)1.1 m Suction tubing for concentrate (Silicone tubing 2.9 x 3)0.95 m Suction tubing (3.5 x 1) for disinfectant compl. with yellowlabelling and suction port6 cm Suction tubing blue for concentrate (silicone tubing 5 x 1.5)6 cm Suction tubing red/white for concentrate (silicone tubing 5 x 1.5)1 x Dust filter for fan rear door1 x Reference solution for blood leak detector2 x O-ring for dialyser couplings2 x Membrane for dialyser couplings2 x O-ring (9.2 x 2.7) for BIC cartridge holder with valve, version 2 (ifoption present)4 x O-ring (9.3 x 2.4) for suction rod2 x O-ring (8 x 1.25) for suction coupling central concentrate supply (ifoption present)

all parts areincluded which

are requiredfor the

exchangeduring a

preventivemaintenance

- 3451897A 1 Repair kit balance chamber for the complete replacement ofboth membranes, incl. all o-ringsand assembly parts (self-locking

nuts, screws, springs etc.)



7-65

Service Kits- 34518681 1 Retrofit kit HDF (SLB/ADB)

- 34518606 1 Retrofit kit fuse holder board 230/240 V

- 34518622 1 Retrofit kit fuse holder board 110/120 V

- 34519505 1 Retrofit kit SAKV currentless closed

- 3451948B 1 Hardware kit for ≥ SW 5.00

- 34514694 1 Retrofit kit POS-460 – GX1LCDincluding:• Sub-rack• GX1LCD motherboard• Adapter RS-232 (for COM3)• SC board adapter loudspeaker/GX1LCD• Cable harness for voltage supply• Assembly material

SW update required:• from 3.46 to 3.48• from 5.35 to 5.36



7-66

00

7.19 Software- 77051A 1 Software 3.46 see compatibility table

- 7703520 1 Software 3.48 (diskettes for TLC/LLS) see compatibility table

- 770532 1 Software 5.35 see compatibility table

- 7703538 1 Software 5.36 (diskettes for TLC/LLS) see compatibility table

- 770621 1 Software 6.21 incl. diskette with PDF file forcover page of operating manual SW 6.21

see compatibility table

- 7703511 1 Software 6.58 incl. diskette with PDF file forcover page of operating manual SW 6.58


- 770721 1 Two diskettes treatment language version044.07.05 (English)/049.07.05 (German) forSW 6.58


- 7703686 1 Software 6.59 see compatibility table

- 7703600 1 bioLogic RR patch diskettes (two) for SW6.58/7.21


- 7703546 1 HD patch diskette V0.10 see compatibility table

- 7703783 1 BIOS update disketteversion 1.8/1.9

see compatibility table1.8 for Dialog Advanced, 1.8/1.9 for Dialog+

- 7703554 1 CD Remote Bedside Link List ReBeLL version1.5.13

for network

- 7703562 1 CD WAN-BSL firmware version 1.0.4.8 for WAN-BSL only



7-67

7.19.1 Compatibility Table SoftwareSoftware (Ex Works) BIOS Dialog Dialog

AdvancedDialog

AdvancedPOS-460 GX1LCD POS-460 GX1LCD GX1LCD

(ex Works)

Software 3.46 (QNX2) - X - - - -Software 3.48 (QNX2) 1.8 - X - - -Software 5.35 (QNX2) - # - X - -Software 5.36 (QNX2) 1.8 - # - X -Software 6.XX (QNX4) 1.8 # * ~ # * ~ # * ~ # * ~ X

# Hardware retrofitting may be necessary depending on status of machine.* For Networking!~ Treatment language version 044.07.05 (English) must be updated only if machine is used in a network (SW ≥6.58)!

7.19.2 Compatibility Table Software Patches/BIOS UpdateDialog Dialog

AdvancedDialog

AdvancedDialog

AdvancedDialog

AdvancedDialog/Dialog Advanced Software Patch QNX2

POS-460/GX1LCDSW 3.46/3.4840 GB HDD(Seagate

ST340014A)

QNX2POS-460/GX1LCDSW 5.35/5.3640 GB HDD(Seagate

ST340014A)

QNX4SW 6.21

bioLogic RR

QNX4SW 6.58

bioLogic RR

QNX4GX1LCD

(BIOS 1.6)Fujitsu HDD

Hard Disk Drive Software Patch X X - - -bioLogic RR Software Patch - - X X -

BIOS Update Diskette - - - - X



7-68

7.20 Miscellaneous- 37840053 m Tubing 12 x 2 (RAL 9001) per meter

- 37840096 m Silicone tubing 8 x 2 per meter


- 39971007 m Silicone tubing 6 x 1.75, red per meterinternal high temperature tubing

39238032 1 Single ear clamp 13.3 for internal high temperature tubing

- 39972348 m Silicone tubing 8 x 3.2, red per meterexternal high temperature tubing

39224538 1 Single ear clamp 17.5 for external high temperature tubing

- 39972321 m Reinforced tubing 6 x 1.75 per meter


- 39972313 m Silicone tubing 5 x 1.5, blue per meter

- 39972305 m Silicone tubing 5 x 1.5, red per meter

- 39971260 m PUR tubing 3.6 x 1.1 per meter

- 8903409 m PVC tubing 3.5 x 1 per meter

- 39972011 m Silicone tubing 3.3 x 2.85 per meter

- 39971414 m Silicone tubing 3.2 x 1.6 per meter

- 39972445 m Silicone tubing 2 x 3, transparent per meter

- 39971210 m Silicone tubing 2 x 1.5 per meter

- 34515143 m PVC tubing 10 x 3, red per meter

- 34565140 m PVC tubing 10 x 3, red 50 meter

- 34515151 m PVC tubing 10 x 3, black per meter

- 34565159 m PVC tubing 10 x 3, black 50 meter

- 34570195 20 Tubing clamp SNP-1.5 ∅ 7-8 mm plastic

- 34570209 20 Tubing clamp SNP-4 ∅ 10-11 mm plastic

- 34570365 20 Tubing clamp SNP-6 ∅ 11.4-13 mm plastic

- 34517766 10 Canister lid, red with retainer for suction rod

- 34517774 10 Canister lid, blue with retainer for suction rod

- 33990492 m Spiral band per meter

- 34773770 5 Y-Tubing connector 6 mm- 39237648 1 Y-Tubing connector 8 mm

A BxA x B Tubing



7-69

Miscellaneous- 39508013 1 Threaded insert M4 a drill ∅ 5.7 mm is required for the threaded insert M4

Note: Do not exceed max. drilling depth 11 mm +0.1(see left figure)

- 34506977 1 Colour pen RAL 9001 (white)

- 7702345 1 Silicone grease 410

- 7702353 1 Silicone rubber adhesive (white) RTV 162

- 7702388 1 Silicone rubber adhesive (transparent) RTV 118

- 34501207 1 Screw locking paint (yellow)

- 39227146 1 Teflon tape

- 7702809 1 Terminal grease 50 ml

1 34570322 10 Grounding for sub-racks d consisting of:screw a, terminal b, tooth lock washer c,washer e, spring washer f, nut g

pay attention to correctassembly sequence!

- 7703708 1 Grease SKD 4002 100 g tube(to lubricate the needle bearing of the roller)

11

60 o

1 +0.15.7+0.1

a1

bcdefg



7-70

7.21 HDF Bag (Substitution Option)1 3451740A 1 Load cell

2 34514406 1 Membrane keyboard

3 34517413 1 Microswitch without spring lever

4 3451744A 1 Trapezoid thread nut

5 34517375 1 Shaft adapter

6 34517456 1 DC gear motor

7 34517839 1 Substitution supervisor board 2 (SSB 2)

8 3451759A 1 Substitution air detector (SUBAD)

8 34560378 1 Substitution air detector 2 (SUBAD 2) not backward compatiblefrom option series no. 0547

9 3451736B 1 Substitution drive board 2 (SAB 2)

10 34570314 5 Single tubing holder (black)

11 34518673 1 Clamp



7-71

1

234

5

67

8

3

9

1011

127.22 HDF Bag (Option)

1 3451740A 1 Load cell

2 34514406 1 Membrane keyboard

3 34517413 1 Microswitch without spring lever

3 3313 2658 1 Spring lever

4 3451759A 1 Substitution air detector (SUBAD)

4 34560378 1 Substitution air detector 2 (SUBAD 2) not backward compatiblefrom option series no. 0547

5 3451744A 1 Trapezoid thread nut

6 3451877A 1 Air detector board ADB

6 34517839 1 Substitution supervisor board 2 (SSB 2) for HDF optionbackwards compatible

7 34517375 1 Shaft adapter

8 34517456 1 DC gear motor

9 3451736B 1 Substitution drive board 2 (SAB 2)

10 34570314 5 Single tubing holder (black)

10 34774106 10 Thread forming screw 50 x 8

11 34518673 1 Clamp

12 3451876B 1 Single load cell board (SLB)



7-72

7.22.1 Flow Detector1 34770925 5 Plug not upwards compatible to pos. 6,

because longer plug

2 34770852 5 O-ring 11.1 x 1.6


4 34772928 3 Centre disc not upwards compatible to pos. 7,because shorter centre disc

5 34771085 5 Seal

6 34514937 1 Plug not backwards compatible to pos. 1,because shorter plug

7 34514945 1 Centre disc not backwards compatible to pos. 4,because higher centre disc

8 3451787A 1 HFD board

123

45

866

23

57



7-73

7.22.2 UF Piston Pump1 3451789D 1 Piston pump (HDF bag option) one-way bearing not necessary

7.22.3 HFS Board1 34517863 1 HFS board for option HDF and

BIC cartridge holder

PowerBoard 2

PowerBoard 1

Supervisor Board

2HFSBoard

1



7-74

7.23 Staff Call (Option)- 34517685 1 Staff call board

DYN AUS

STAT (Default)DYN

1



7-75

7.24 Single Needle Valve (Option)1 34519882 1 SAKA board

PowerBoard 2

PowerBoard 1

Supervisor Board

Controller Board

1SAKABoard



7-76

321 4 5 6

57489

7.25 Bicarbonate Cartridge Holder (Option)7.25.1 BIC Cartridge Holder


2 34519769 1 Housing, top

3 3451791A 1 Insert complete with piercing spike

4 34570608 10 O-ring 9.3 x 2.4

4 34570241 5 O-ring 9.19 x 2.62 alternative

5 3451964A 1 Reed sensor with cable harness and tubing(tubing 12 x 2, silicone tubing 3.3 x 2.85)

for top BIC cartridgeholder only

5a 34517138 1 Reed sensor with contacts and o-ring 3.68 x 1.78

6 34517901 1 Pressure spring

7 34570250 5 O-ring 15.54 x 2.62

8 34517928 1 Connector piece complete with piercingspike

9 34519750 1 Housing, bottom

- 34517782 5 Disposable filter filter FBIC

a



7-77

DBK

DBK

1,2

6

34

5

7.25.2 Air Separator LAB1, Throttle DBK and Valve VBKO/VBKS1 3477084A 5 Tubing connector ∅ 7 x 1/8" plastic

2 34770852 5 O-ring 11.1 x 1.6

3 34770925 5 Plug

4 34770852 5 O-ring 11.1 x 1.6




8 3451603B 1 Solenoid valve 2/2 way





7-78

7.25.3 Air Separator LAB2/Valve VBICP and Valve VVB- 3451603B 1 Solenoid valve 2/2 way for VVB, VBICP

- 34517979 1 Solenoid valve 2/2 way coil straight, connector/flange

- 34770852 5 O-ring 11.1 x 1.6 for LAB2

- 3477084A 5 Tubing connector ∅ 7 x 1/8" plastic, for LAB2

- 34570233 5 O-ring 26.64 x 2.62 for LAB2

7.25.4 BIC Cartridge Holder Boards1 34560149 1 BIC-KV board

2 34517944 1 HFS board

PowerBoard 2

PowerBoard 1

Supervisor Board

2

1

HFSBoard

BIC-KVBoard



7-79

1

2 2

2

3

9

4 5 6

6

7

7

8

7.26 Bicarbonate Cartridge Holder with Valve (Option)7.26.1 BIC Cartridge Holder with Valve

1 34519637 1 Holder, top (RAL 9001)

2 3451953A 1 Valve with piercing spike version 1complete with o-ring

not upward compatible

2 34560084 1 Valve with piercing spike version 2complete with o-ring

not backward compatiblebatch no. ≥ 019-05-01 on valve housing

batch no. 1489-04 on valve housingor 07—05-N or 08-05-N on valve bottom

3 34519840 1 Housing, top

4 34514422 1 Cover for top housing

5 34519866 1 Slide ring

6 34519548 1 Swivel arm version 1 not upward compatiblefor valve with piercing spike version 1 only

6 34560092 1 Swivel arm version 2 not backward compatiblefor valve with piercing spike version 2 only

7 34570594 10 O-ring 9.2 x 2.7

7 34570241 5 O-ring 9.19 x 2.62 alternative

8 34570420 5 Pressure spring

9 34519858 1 Housing, bottom

10 34514449 1 Cover for bottom housing

11 34517138 1 Reed sensor with contacts and o-ring3.68 x 1.78

bottom BIC cartridge holder

- 34517782 5 Disposable filter filter FBIC

2

10

11

Pos. 6Version 1 Version 2

19.7mm



7-80

7.26.2 Air Separator LAB2/Valve VBICP and Valve VVB1 3451906C 1 Solenoid valve 2/2 way coil straight, connector/connector (AKM)

2 34770852 5 O-ring 11.1 x 1.6


3 34570233 5 O-ring 26.64 x 2.62


VVB

VBICPBICP

KP

UFPEK

EP

FPEPE

RVE

ENDLF

BICLF

RVB

RVFPE

RVK

LAB2

1,2 3 2,4



7-81

LAB1

VBKOVBKS

VBKSDBK

DBK7 8

4

4

1,2

1,2

5

6

2,3

2,3

7.26.3 Air Separator LAB1, Throttle DBK and Valve VBKO/VBKS1 3477103A 2 Tubing connector ∅ 3.5 x 1/8" plastic

2 34770852 5 O-ring 11.1 x 1.6


4 34770925 5 Plug

5 34770852 5 O-ring 11.1 x 1.6








7-82

7.26.4 BIC Cartridge Holder Boards1 34560149 1 BIC-KV board

2 34517944 1 HFS board

2

1

PowerBoard 2

PowerBoard 1

Supervisor Board

HFSBoard

BIC-KVBoard



7-83

SAKASAKV

V A

SADRDV

PV PA PBS/SN PBE

BPVBPA

HP

1

7.27 HDF Online (Option)1 - - Substitution port see separate figure

- - UF sub-rack see separate figure



7-84

7.27.1 Substitution Port1 3451448A 1 Substitution port complete

2 34570349 5 Pressure spring ∅ 4.6 x 14 mm

3 3457035A 2 Quadring 12.37 x 2.62 incl. seal quadring is fastened with siliconerubber adhesive RTV 118

4 34560017 1 Substitution connector stainless steel, without o-ring

5 3477106A 5 O-ring 6.4 x 1.3


1

4,53

2

6

4,5

6

A or A+B (A=Quadring; B=Spacer)

AB

AB



7-85

VDA

VSAAVSAEVEBK1

VEBK2

VABK2 VDABK1

FPA

RVFPA

LA

VDFFVLA

DDE

MSBK2

MSBK1

HFB

VBE

VBP

VSB

VABK1

VDEBK2

VDEBK1

3

1,2

3

4

3

1,2

s

7.27.2 UF Sub-Rack HDF Online1 3451906C 1 Solenoid valve 2/2 way manuf. AKM only, coil straight,

connector/connector

2 34770852 5 O-ring 11.1 x 1.6

3 3451902B 1 Solenoid valve 2/2 way manuf. AKM only, coil straight, connector/flange

4 - - Valve block see separate figure



7-86

VBE

HFB

VSB

VBP

1

2

3

7.27.3 Valve Block HDF Online1 34560661 1 Hydrophobe filter

2 34519009 1 Solenoid valve 3/2 way




7-87

7.27.4 HDF Online Boards1 34519475 1 HOP board version 2

2 34519432 1 Power board 2 version 2

3 34519114 1 HOA board

HOPBoard

BIC-KVBoard

HOABoard

PowerBoard 2

PowerBoard 1

Supervisor Board

Controller Board

Switch Mode Power SupplySMPS

2

1

3



7-88

3

3

7.27.5 DF/HDF Filter Holder HDF Online1 - - Filter holder complete

version 1filter holder version 1 can be replaced by

a pair of filter holders version 2(see version 2)


3 34570632 10 O-ring 12.1 x 2.7

1

1

2

2 2



7-89

DF/HDF Filter Holder HDF Online1 34560041 1 Filter holder complete version 2 also see filter holder version 1


3 3451445A 1 Dialyser coupling, red


3 34990445 5 O-ring


1

2

2

3

3

3

Red/Rot

Red/Rot

Blue/Blau

Blue/Blau

Red/RotBlue/Blau



7-90

7.28 Automatic Blood Pressure Measurement ABPM (Option)7.28.1 Automatic Blood Pressure Measurement ABPM Module M2000

1 34519807 1 Assembly bracket incl. assemblymaterial

to exchange an ABPM module M1050against ABPM module 2000

2 - - ABPM module M2000 withoutinterface board

replaced by ABPM module M2005,see 7.28.2 for details

3 34514147 1 ABPM interface board M2000 for ABPM module M2000

- 34518525 1 ABPM interface board M1050 for ABPM module M1050

- 34518517 1 Coupling (ABPM) for pressure tubing

1 2 3

3



7-91

7.28.1.1 Compatibility Table ABPM Modules/Interface Boards

Interface Board ABPM Module Motherboard

M1050 M2000 POS-460 GX1LCD34518525 (ABPM interface board M1050) X - X -34514147 (ABPM interface board M2000) - X *X *X

*X The factory setting of the interface board isfor GX1LCD motherboard.

GX1LCD Motherboard (Factory Setting):R5/R6/R7 are assembled.

POS-460 Motherboard:Unsolder R5/R6/R7 (zero ohm resistors) and solder theseresistors in position R2/R3/R4 for POS-460 motherboard.

R2

R3

R4

R5

R6

R7

ABPM InterfaceBoard M2000



7-92

7.28.2 Automatic Blood Pressure Measurement ABPM Module M20051 3451487A 1 ABPM module M2005 (integrated

interface board) incl. assemblyangle

backwards compatible toM2000/M1050

firmware version of ABPM module onsticker: Version C:X.X

1

P2P1Version CX.X



7-93

7.28.2.1 Compatibility Table ABPM Module M2005

P1P2

DIL1 2 43 5 61

1ON

DIL Switch: Default GX1LCD (ex Works)

OFF

DIL Switch

Position of DIL Switches for POS-460 Motherboard

Position of DIL Switches for GX1LCD Motherboard

1 2 43 5 6ON

OFF

1 2 43 5 6ON

OFF

DIL Switch1 3 52 4 6

POS-460 ON ON

ON

OFF

OFF

OFF

GX1LCD(default) O

N

ON ON

OFF

OFF OFF



7-94

7.29 Battery OptionThe battery (rechargeable) contains diluted sulfric acid, a very toxic substance.If the battery leaks and the liquid inside spills on the skin or clothing,immediately wash it off with plenty of clean water.

If the liquid splashes into the eyes, immediately flush the eyes with plenty ofclean water and consult a doctor. Sulfric acid in the eyes may cause loss ofeyesight and acid on the skin will cause burns.

Pay attention to the included documentation of the battery supplier.

High voltage can be present in the basic housing and monitor due to the battery(if monitor booster is defective), even if the machine has been disconnectedfrom mains. Pull out the battery compartment in the base platform and switchoff the battery voltage before opening the machine.

1 34519602 1 Monitor booster board

2 - - Battery sub-rack see separate figure

X201

X203

X202

MonitorBoosterBoard

+-AB

SMPS(P13)

SMPS(P3)

1

2



7-95

SMPSP3

blue/blau

green/yellowgrün/gelb

brown/braun

blue/blaublue/blau

brownbraun

brownbraun

brownbraun

green/yellowgrün/gelb

1

1

7.29.1 Battery Sub-RackIf a battery must be replaced exchange the complete battery set!

Prevent shorts in the battery compartment during disassembly and assembly:Please pay attention to the correct assembly/disassembly sequence during theconnection and disconnection of the battery.Connection:Connect the (+) terminal then the (-) terminal. Then connect the ground leadto the compartment plate.Disconnection:Disconnect the (-) terminal and the ground lead and then the (+) terminal.

1 34519599 1 Battery (rechargeable) set12 V/17 Ah, incl. cable ties 2 x battery (rechargeable) 12 V/17 Ah

prior to assembly: slightly grease thebattery terminals with terminal grease

- 7702809 1 Terminal grease 50 ml



7-96

7.29.2 Charge LED1 34519874 1 LED yellow assemble and seal with silicone

rubber adhesive RTV 1181+ -

BPV

PBS/SN PBE

-+

1blue/blau

red/rot



7-97

7.30 Nexadia -BSL/WAN-BSL (Option)1 34514554 1 Bedside link board (BSL board) without firmware

1

7 . S p a r e P a r t s L i s t 7 / 2 0 0 6Art. No. Qty. Description


7-98Dialog/Dialog Advanced

7.31 Spare Parts List Alphabetical Order

Please note that the alphabetic spare parts have been listed using anomenclature hierarchy structure, because the common approach forsearching a specific spare part would be in a structured way.

How to search and find a specific spare part

Some examples:

Controller board 2 MB

Search for the keyword board and look for controller to find therequired spare part number.

3451921B 1 Board, controller, 2 MB

Solenoid valve

Search for the keyword valve and look for solenoid to find the requiredspare part number.

3451902B

3451906C

1

1

Solenoid valve 2/2 way

Solenoid valve 2/2 way

Spare Parts List as PDF File

You can easily search and find in PDF files using the Adobe Reader (clickon right mouse button: Search).


Spare Parts List Alphabetical Order Art. No. Qty. Description


7-99

34570292 10 Absorber, vibration

34514813 1 Adapter RS-232

34518614 1 Adapter, program, for memory card

34517375 1 Adapter, shaft

34518738 1 Adapter, supervisor communication program, SCB-C 2.05/SCB-S2.12

34518592 1 Adapter, supervisor communication program, SCB-S 1.03

7702388 1 Adhesive, silicone rubber, (transparent) RTV 118

7702353 1 Adhesive, silicone rubber, (white) RTV 162

34519548 1 Arm, swivel, version 1

34560092 1 Arm, swivel, version 2

34560246 1 Ball, float, incl. o-ring

33990492 m Band, spiral

34519319 1 Battery (rechargeable) 3.6V

34519599 1 Battery (rechargeable) set 12 V/17 Ah, incl. cable ties

34519327 1 Battery BR2032, 3V

34518525 1 Board, ABPM interface, M1050

34514147 1 Board, ABPM interface, M2000

3451877A 1 Board, air detector, ADB

34514554 1 Board, bedside link, BSL

34560149 1 Board, BIC-KV

3451627E 1 Board, controller, 1 MB

3451921B 1 Board, controller, 2 MB

3451787A 1 Board, HFD




7-100

34517863 1 Board, HFS

34517944 1 Board, HFS

34519114 1 Board, HOA

34519475 1 Board, HOP, version 2

3451665A 1 Board, membrane position sensor

34519602 1 Board, monitor booster

34519424 1 Board, power, 1 version 2



3451708D 1 Board, red detector with housing

34519882 1 Board, SAKA

34519734 1 Board, SAKV-SG

34517952 1 Board, SC, adapter

34514708 1 Board, SC, adapter loudspeaker/GX1LCD

7701667 1 Board, service

7702655 1 Board, service, SMPS

3451876B 1 Board, single load cell, (SLB)

34560076 1 Board, single needle

34517685 1 Board, staff call

3451736A 1 Board, substitution drive, 2 (SAB2)

34517839 1 Board, substitution supervisor, 2 (SSB 2)

34519416 1 Board, supervisor communication, (SCB)

3451461A 1 Board, supervisor, version 3




7-101

3451499B 1 Board, supervisor, version 3

34560602 1 Body, pump, for piston pump

7703503 1 Bootloader version 0.07

34519807 1 Bracket, assembly, incl. assembly material

34560580 1 Buzzer

34519971 1 Buzzer

7703589 1 Cable RJ45, crossover

770284A 1 Cable, DCI, external

34514821 1 Cable, DCI, internal

7703635 1 Cable, Extension, D-sub 9 pin (male/female)

7107232 1 Cable, external MFC/LAN connection

39410668 1 Cap ∅ 34 mm

39410625 1 Cap ∅ 44 mm

34770003 5 Cap, protection for mains switch

34519912 2 Capacitor 1F

7703643 1 Card, chip, for BSL-Nexadia

34517723 1 Caster, swivel

34519343 1 Caster, swivel

34519351 1 Caster, swivel, with brake

3451740A 1 Cell, load

7703090 1 Chamber, measurement 500 ml

34518673 1 Clamp

34570667 1 Clamp




7-102

39238032 1 Clamp, single ear, 13.3

39224538 Clamp, single ear, 17.5

34570195 20 Clamp, tubing, SNP-1.5 ∅ 7-8mm

34771271 10 Clamp, tubing, 15/9

34570209 20 Clamp, tubing, SNP-4 ∅ 10-11mm

34570365 20 Clamp, tubing, SNP-6 ∅ 11.4-13mm

34519092 1 Coil

3451884A 5 Connection, manometer (blue)

3451833A 5 Connection, manometer (red)

3457058A 5 Connection, manometer (white)

34517928 1 Connector piece complete with piercing spike

3451726A 1 Connector, feed-through

7703805 1 Connector, male to male

34514759 1 Connector, male, (blue) with o-rings

34514767 1 Connector, male, (red) with o-rings

34570306 5 Connector, reducer tubing

3451457A 5 Connector, reducer tubing

34514961 5 Connector, reducer tubing, ∅ 8 x 1/8"

34519106 1 Connector, substitution

34515186 1 Connector, tubing, ∅ 11 x 1/8"


3477103A 2 Connector, tubing, ∅ 3.5 x 1/8"

34517251 1 Connector, tubing, ∅ 3.5 x 1/8"




7-103

3477084A 5 Connector, tubing, ∅ 7 x 1/8"


3451916A 5 Connector, tubing, ∅ 8 x 1/8"


34773770 5 Connector, Y-Tubing, 6 mm

39237648 1 Connector, Y-Tubing, 8 mm

34511628 1 Cord, mains, without connector 230/240 V

34518517 1 Coupling (ABPM)

7703597 1 Coupling (female/female) RJ45

3451446A 1 Coupling, dialyser, blue

3451445A 1 Coupling, dialyser, red

34514597 1 Coupling, suction

34511792 1 Coupling, tubing

3451669E 1 Cover for blood pump

3451981E 1 Cover for blood pump (upgrade kit)

34514449 1 Cover for bottom housing

3451774A 1 Cover for concentrate supply

34514422 1 Cover for top housing

34570578 1 Cover for tubing holder SAKA/SAKV

34514317 1 Cover for tubing holder SAKA-SG

34519610 1 Cover, internal, rear door

34560424 1 Cover, internal, rear door

34518355 1 Crank for blood pump




7-104

34560157 1 Crank for blood pump

34519378 1 Cylinder for heater element

34511342 1 Cylinder, glass

7701861 1 Cylinder, graduated, 250 ml

3451656E 1 Detector 1, blood leak, complete < SW 3.46

3451908C 1 Detector 3, blood leak

3451894C 1 Detector 3, blood leak, complete with Adapter

3456005C 1 Detector, safety air, SAD version 3 with red detector

3451759A 1 Detector, substitution air, (SUBAD)

34560378 1 Detector, substitution air, 2 (SUBAD 2)

34514945 1 Disc, centre



7703783 1 Diskette version 1.8/1.9, BIOS update

7703546 1 Diskette, HD patch, V0.10

7703600 1 Diskettes (two), bioLogic RR patch, for SW 6.58/7.21

770721 1 Diskettes, two, treatment language version 044.07.05(English)/049.07.05 (German) for SW 6.58

34517987 1 Distance piece with 2 x O-ring 11.1 x 1.6 and 2 x screw M4 x 4.5

34516662 1 Drive 3.5", floppy disk

3451458A 1 Drive, hard disk, 40 GB

34560564 1 Elbow, plastic, for piston pump

7702736 1 Extraction tool for hinge pin with interior thread

7701756 1 Extraction tool set (AMP)




7-105

34517610 1 Fan 80 x 80 mm with connector

34517472 1 Fan for CPU

34516409 1 Filter

34560041 1 Filter holder complete version 2

34517782 5 Filter, disposable

34570284 5 Filter, dust

34560661 1 Filter, hydrophobe

34514724 1 Filter, interference

7703562 1 Firmware, CD WAN-BSL firmware version 1.0.4.8

7702302 1 Flask, volumetric, 500 ml

34516603 1 Fork light barrier for servomotor

34517804 1 Front panel, bottom

34570144 10 Fuse T0.05 A (TR5)

34570152 10 Fuse T0.1 A (TR5)

34518819 10 Fuse T1.25 A (TR5)

34570063 10 Fuse T2 A (TR5)

34570446 10 Fuse T3.15 A (5 x 20)

34570160 10 Fuse T3.15 A (TR5)

34570080 10 Fuse T4 A (5 x 20 mm)

34570071 10 Fuse T4 A (TR5)

34570098 10 Fuse T5 A (5 x 20 mm)

34570470 10 Fuse T5 A (TR5)

34570462 10 Fuse T6.25 A (6.3 x 32 mm)




7-106

34570101 10 Fuse T6.3 A (5 x 20 mm)

34771310 10 Fuse T6.3 A (6.3 x 32 mm)

34570110 10 Fuse T10 A (5 x 20 mm)

34570128 10 Fuse T10 A (6.3 x 32 mm)

34570179 10 Fuse M10 A (6.3 x 32 mm)

34771328 10 Fuse F12 A (6.3 x 32 mm)

34570136 10 Fuse T15 A (6.3 x 32 mm)

34570187 10 Fuse M20 A (6.3 x 32 mm)

7702345 1 Grease, silicone, 410

7703708 1 Grease SKD 4002

7702809 1 Grease, terminal 50 ml

34570322 10 Grounding for sub-racks d consisting of:

34511547 1 Heat exchanger (option)

3451969A 1 Heater element 120V / 1800 W

34519580 1 Heater element 240V / 1800 W

34517758 2 Hinge pin

34519823 2 Hinge pin with interior thread

3451438A 1 Holder, bottom

34570543 1 holder, double tubing

34570551 1 Holder, double, big

34570535 1 Holder, single tubing

34570560 1 Holder, single tubing

34570314 5 Holder, single tubing, (black)




7-107

34570519 1 Holder, single, big

34570527 1 Holder, single, small

34518835 1 Holder, syringe

3451439A 1 Holder, top

34519637 1 Holder, top (RAL 9001)

3451441A 1 Holder, tubing, fan cover

34519750 1 Housing, bottom

34519858 1 Housing, bottom

34519769 1 Housing, top

34519840 1 Housing, top

3456018A 1 Housing with lid (air separator)

3451791A 1 Insert complete with piercing spike

39508013 1 Insert, threaded M4

7703848 1 Jig, assembly, (motor piston pump)

34560572 1 Joint, bell, for piston pump

34518568 1 Keyboard

34514406 1 Keyboard, membrane

34518720 1 Keyboard, membrane

7703058 1 Kit, assembly, for glass touch screen

3451948B 1 Kit, hardware, for ≥ SW 5.00

710740A 1 Kit, hardware, for SW 3.10

34518649 1 Kit, hardware, for SW 3.40/3.46

3451893C 1 Kit, maintenance, Dialog/Dialog Advanced/Dialog+




7-108

3451897A 1 Kit, repair, balance chamber

34519360 1 Kit, repair, monitor cable for monitor type 14HC4AA4



3451898A 1 Kit, repair, rinsing bridge

34519335 1 Kit, retrofit, base platform complete with casters

34518622 1 Kit, retrofit, fuse holder board 110/120 V

34518606 1 Kit, retrofit, fuse holder board 230/240 V

34518681 1 Kit, retrofit, HDF (SLB/ADB)

34514694 1 Kit, retrofit, POS-460 – GX1LCD

34519505 1 Kit, retrofit, SAKV currentless closed

34570616 5 Latch

34519874 1 LED yellow

3313 2658 1 Lever, spring

34570659 1 Lever, unlocking, set

34560190 1 Lid (air separator)

34517774 10 Lid, canister, blue

34517766 10 Lid, canister, red

34518100 1 Loudspeaker

3456000A 1 Magnet, rotary, complete

34519742 1 Magnet, rotary, with mechanical locking

3451863B 1 Manifold (preassembled), DF distribution

7701357 1 Manometer 0-4 bar




7-109

34511571 1 Manometer 2.5 bar

3451615A 2 Membrane for balance chamber

34773550 20 Membrane for dialyser coupling

770085A 1 Meter, flow, 1.1 l/min

34517413 1 Microswitch without spring lever

3451487A 1 Module M2005, ABPM, (integrated interface board)

34519963 1 Module, SIM, 32 MB

34514791 1 Module, SODIM, 64 MB

3451855B 1 Monitor, colour

3451404A 1 Motherboard GX1LCD

3451663A 1 Motor

34517456 1 Motor, DC gear

34560556 1 Motor for piston pump

34514678 1 Nipple, connection

34514651 2 Nipple, suction, with o-rings 9.3 x 2.4

3451744A 1 Nut, trapezoid thread

34990445 5 O-ring

34570012 10 O-ring 2.7 x 1.5

34771140 20 O-ring 3.1 x 1.6

34771166 20 O-ring 3.68 x 1.78

34570683 20 O-ring 4.47 x 1.78

34570457 10 O-ring 5.0 x 1.6

3477106A 5 O-ring 6.4 x 1.3




7-110

34570438 5 O-ring 8.0 x 1.25

34770950 20 O-ring 8.0 x 1.6

3477104A 10 O-ring 8.3 x 2.4

34570241 5 O-ring 9.19 x 2.62

34570594 10 O-ring 9.2 x 2.7

34773762 10 O-ring 9.25 x 1.78

34570004 5 O-ring 9.3 x 2.4

34570608 10 O-ring 9.3 x 2.4 (for BIC option)

34770852 5 O-ring 11.1 x 1.6

34570632 10 O-ring 12.1 x 2.7

34771255 20 O-ring 14 x 1.5

34570250 5 O-ring 15.54 x 2.62

34770976 10 O-ring 15.6 x 1.78

34570233 5 O-ring 26.64 x 2.62

34501207 1 Paint, screw locking (yellow)

34506977 1 Pen, colour, RAL 9001 (white)

34770925 5 Plug

34514937 1 Plug

34570640 5 Plug, dummy

34570373 10 Plug (long)

34570381 10 Plug (short)

7703473 1 Plug, test, RS 232

3451854A 1 Pole, holder




7-111

3451716A 1 Pole, IV

3451962A 1 Pole, infusion, version 2

3451448A 1 Port, substitution, complete

34512675 1 Port, suction

34517090 1 Potentiometer

7701543 1 Potentiometer template 20 ml

7701551 1 Potentiometer template 50 ml

719260A 1 Power supply, mains, (110/120 V~)

3451758A 1 Power supply, mains, (110/120 V~)

719259B 1 Power supply, mains, (230/240 V~)

719284D 1 Power supply, switch mode, SMPS

719287B 1 Power supply, switch mode, SMPS version 12

3451474B 1 Power supply, switch mode, SMPS version 12

34519564 1 Profile, silicone

719262F 1 Pump, blood, without roller

3451711F 1 Pump, blood, without roller

34515330 1 Pump, gear, with magnet, without motor (Micropump version1)

3451632B 1 Pump, heparin, Comfort complete

3451432B 1 Pump, heparin, Compact

3451749E 1 Pump, piston

3451789D 1 Pump, piston, (HDF bag option)

34514953 1 Reducer

34560262 2 Relay (12 V – Ascom/Delta)




7-112

34514775 2 Relay (12 V - SMPS)

34560254 1 Relay (heater – Ascom/Delta)

3451643A 1 Retainer for suction rod

3457035A 2 Ring, quad-, 12.37 x 2.62 incl. seal

34519866 1 Ring, slide

34516506 1 Rinsing bridge 1

34519033 1 Rinsing bridge 2 housing

3451654A 1 Rod, suction, complete

34519939 1 Rod, suction, complete, blue

34519920 1 Rod, suction, complete, red

34516689 1 Roller 8x12 for blood pump

34774106 10 Screw, thread forming, 50 x 8

34771085 5 Seal

34771158 2 Seal

34516670 1 Seal for blood pump

34516018 1 Seal for heater element

34517057 1 Seal for housing heparin pump

3451611B 1 Sensor, bicarbonate conductivity

3451610B 1 Sensor, END conductivity

3451604B 1 Sensor, level, complete with float ball

3451657B 1 Sensor, pressure, PDA

34516352 1 Sensor, pressure

34516131 1 Sensor, pressure - 660 mbar




7-113

34517138 1 Sensor, reed, with contacts and o-ring 3.68 x 1.78

34519246 1 Sensor, reed, complete

3451964A 1 Sensor, reed, with cable harness and tubing (tubing 12 x 2,silicone tubing 3.3 x 2.85)

3451614B 1 Sensor, temperature

3451659D 1 Servomotor with board

34517294 1 Set, suction, with tubing, suction port and black lid

34514562 1 Set, suction, with tubing, suction port and yellow lid

34513540 1 Sieve disc

77051A 1 Software 3.46

7703520 1 Software 3.48

770532 1 Software 5.35

7703538 1 Software 5.36

770621 1 Software 6.21 incl. diskette with PDF file for cover page ofoperating manual SW 6.21

7703511 1 Software 6.58 incl. diskette with PDF file for cover page ofoperating manual SW 6.58

7703686 1 Software 6.59

7703554 1 Software, CD Remote Bedside Link List ReBeLL version 1.5.13

7700911 1 Solution, reference, red

7701497 1 Spanner, special socket, ∅ 18 mm

34570420 5 Spring, pressure






7-114

34570349 5 Spring, pressure, ∅ 4.6 x 14 mm

34771093 10 Spring, pressure, 100 mmHg

34771050 10 Spring, pressure, 500 mmHg

770203A 1 Stopcock system with five stopcocks, incl. lines

34518029 1 Strain relief

3451059A 1 Switch, mains

7702310 10 Syringe 1 ml

34560165 1 Tank, upline, with lid

39227146 1 Tape, teflon

34517324 2 Tappet, valve

7702493 1 Template 1.4/1.5

7702027 1 Template 1.5/1.6

34516069 1 Throttle 0 - 4 bar

3451727B 1 Throttle 0.4 bar

3451664B 1 Throttle 1.3 bar

34517847 1 Touch screen, glass

3451662A 1 Transformer, isolating

3451608A 1 Transformer, mains

3451728A 1 Tube, PE, 4 x 1

37840053 m Tubing 12 x 2 (RAL 9001)

39971260 m Tubing, PUR, 3.6 x 1.1

8903409 m Tubing, PVC, 3.5 x 1

34515151 m Tubing, PVC, 10 x 3, black




7-115

34565159 50m Tubing, PVC, 10 x 3, black

34515143 m Tubing, PVC, 10 x 3, red

34565140 50m Tubing, PVC, 10 x 3, red

39972321 m Tubing, reinforced, 6 x 1.75

39971210 m Tubing, silicone, 2 x 1.5

39972445 m Tubing, silicone, 2 x 3, transparent

39971414 m Tubing, silicone, 3.2 x 1.6

39972011 m Tubing, silicone, 3.3 x 2.85

39972313 m Tubing, silicone, 5 x 1.5, blue

39972305 m Tubing, silicone, 5 x 1.5, red

39236315 m Tubing, silicone, 5 x 3





3451953A 1 Valve with piercing spike version 1 complete with o-ring

34560084 1 Valve with piercing spike version 2 complete with o-ring

34516077 1 Valve, proportional control

34516123 1 Valve, proportional control

34514988 1 Valve, return, incl. 2 x tubing clamps, 2 x cable ties

3451603B 1 Valve, solenoid, 2/2 way

34517979 1 Valve, solenoid, 2/2 way

3451902B 1 Valve, solenoid, 2/2 way




7-116

3451906C 1 Valve, solenoid, 2/2 way

34519009 1 Valve, solenoid, 3/2 way

7701713 1 Weight, calibration, (10 kg)


Page Pos. Old Art. No. Description New Art. No. Description Cause of Change/Modification


7-117

7.32 Changes/Modifications in Spare Parts List

All changes and modifications are listed since the last edition of thisspare parts list (from edition 7-2007/edition date 06.10.12 to edition 8-2008/edition date 08.11.02).

7-2 - - - - - Supplemented Material Return Form (cleaningand disinfection of spare parts)

7-12 2 3451906B Solenoid valve 2/2 way 3451906C Solenoid valve 2/2 way new art. no.

7-13 1 34771000 O-ring 5.0 x 1.5 34570683 O-ring 4.47 x 1.78 new art. no.

7-15 8 3451604A Level sensor complete with floatball

3451604B Level sensor complete new art. no./modified purchase text






7-19 3 3451611A Bicarbonate conductivity sensor 3451611B Bicarbonate conductivity sensor new art. no.

7-19 5 3451610A END conductivity sensor 3451610B END conductivity sensor new art. no.

7-19 13 34515330 Gear pump (Micropump) withmagnet, without motor

- Gear pump (Micropump version 1)with magnet, without motor

modified purchase text


7-22 1 3451749C Piston pump 3451749E Piston pump new art. no.

7-22 2 3451789C UF piston pump (HDF option) 3451789D Piston pump (HDF bag option) new art. no./modified purchase text




7-118

7-22 5 - - 34560556 Motor for piston pump new art. no.

7-22 6 - - 34560572 Bell joint for piston pump new art. no.

7-22 7 - - 34560602 Pump body for piston pump new art. no.

7-22 8 - - 34560564 Plastic elbow for piston pump new art. no.

7-22 - - - 7703848 Assembly jig (motor piston pump) new art. no.

7-24 3 3451611A Bicarbonate conductivity sensor 3451611B Bicarbonate conductivity sensor new art. no.

7-24 5 3451610A END conductivity sensor 3451610B END conductivity sensor new art. no.





7-27 1 3451749C Piston pump 3451749E Piston pump new art. no.

7-27 2 3451789C UP piston pump (HDF option) 3451789D Piston pump (HDF bag option) new art. no./modified purchase text

7-27 5 - - 34560556 Motor for piston pump new art. no.

7-27 6 - - 34560572 Bell joint for piston pump new art. no.

7-27 7 - - 34560602 Pump body for piston pump new art. no.

7-27 8 - - 34560564 Plastic elbow for piston pump new art. no.






7-29 10 34560181 Housing with lid (air separator) 3456018A Housing with lid (air separator) new art. no.

7-30 6 34516654 Membrane position sensor board 3451665A Membrane position sensor board new art. no./modified purchase text (exchangeas pair only)





7-119





7-32 10 34560181 Housing with lid (air separator) 3456018A Housing with lid (air separator) new art. no.


7-33 6 34516654 Membrane position sensor board 3451665A Membrane position sensor board new art. no./modified purchase text

7-34 2 - - 3451404A Motherboard GX1LCD new art. no.

7-34 3 34514589 Hard disk drive 40 GB 3451458A Hard disk drive 40 GB new art. no.

7-34 2 - - 34514791 SODIM module 64 MB new art. no.

7-35 3 34514589 Hard disk drive 40 GB 3451458A Hard disk drive 40 GB new art. no.

7-36 - 34519726 Internal cover rear door 34560424 Internal cover rear door new art. no.

7-38 - - - - - Updated compatibility table

7-39 1 3451629B Mains power supply (230/240 V~) - - discontinued

7-39 K5/K6 34560262 Relay (24 V) - Relay (12 V) modified purchase text

7-40 1 34514740 Switch mode power supply SMPS 3451474B Switch mode power supply SMPSversion 12

new art. no./modified purchase text (SMPSVersion 12)

7-40 1 7192878 Switch mode power supply SMPS 719287B Switch mode power supply SMPS new art. no./modified purchase text (SMPSVersion 12)

7-40 F600 34570179 Fuse M10 A (TR5) - Fuse M10 A (6.3 x 32 mm) modified purchase text

7-40 K3/K4 34514775 Relay (24 V) - Relay (12 V) modified purchase text

7-40 H104 34503447 Buzzer 34560580 Buzzer new art. no.

7-41 - - - 3451474B Switch mode power supply SMPS new art. no. (SMPS Version 12)

7-41 - - - 719287B Switch mode power supply SMPS new art. no. (SMPS Version 12)

7-42 6 7192630 Roller 8x12 for blood pump - - discontinued




7-120

7-42 12 3451945B Single needle board 34560076 Single needle board new art. no.

7-43 16 34518517 Coupling - Coupling (ABPM) modified purchase text

7-43 20 3451632A Heparin pump Comfort complete 3451632B Heparin pump Comfort complete new art. no.

7-43 23 34518924 Rotary magnet complete 3456000A Rotary magnet complete new art. no.

7-43 24 3456005B SAD version 3 with red detector 3456005C SAD version 3 with red detector new art. no.

7-44 6 7192630 Roller 8x12 for blood pump - - discontinued

7-44 12 3451945B Single needle board 34560076 Single needle board new art. no.

7-45 17 3451432A Heparin pump Compact 3451432B Heparin pump Compact new art. no.

7-45 17b - - 34570640 Dummy plug new art. no.

7-45 17c - - 34570667 Clamp new art. no.

7-45 17d - - 34570659 Unlocking lever set new art. no.

7-45 18 34518924 Rotary magnet complete 3456000A Rotary magnet complete new art. no.

7-45 19 3456005B SAD version 3 with red detector 3456005C SAD version 3 with red detector new art. no.

7-46 1 34519629 Infusion pole 3451962A Infusion pole version 2 new art. no./modified purchase text

7-46 5 34511628 Mains cord, without connector - Mains cord, without connector230/240 V


7-47 6 34516557 Suction coupling 34514597 Suction coupling new art. no.

7-47 7 34514660 Suction nipple with o-rings 9.3 x2.4

34514651 Suction nipple with o-rings 9.3 x2.4

new art. no.

7-48 2 34519289 Connection nipple 34514678 Connection nipple new art. no.

7-48 2 34514031 Valve with seal - - discontinued


7-48 - - - 34565140 PVC tubing 10 x 3, red new art. no. (50 m)




7-121

7-48 - - - 34565159 PVC tubing 10 x 3, black new art. no. (50 m)

7-49 14 - - 34773762 O-ring 9.25 x 1.78 new art. no.

7-51 10 3451657A Pressure sensor 3451657B Pressure sensor PDA new art. no./modified purchase text

7-51 12 719266E Blood leak detector 1 complete <SW 3.46

- - discontinued

7-51 20 - - 34773762 O-ring 9.25 x 1.78 new art. no.

7-53 1 34519629 Infusion pole 3451962A Infusion pole version 2 new art. no./modified purchase text

7-53 5 34511628 Mains cord, without connector - Mains cord, without connector230/240 V


7-53 - 34518517 Coupling - Coupling (ABPM) modified purchase text


7-55 2 34519289 Connection nipple 34514678 Connection nipple new art. no.

7-55 2 34514031 Valve with seal - - discontinued


7-55 7 34514660 Suction nipple with o-rings 9.3 x2.4

34514651 Suction nipple with o-rings 9.3 x2.4

new art. no.



7-56 14 - - 34773762 O-ring 9.25 x 1.78 new art. no.

7-58 4 3451657A Pressure sensor 3451657B Pressure sensor PDA new art. no./modified purchase text

7-58 17 - - 34773762 O-ring 9.25 x 1.78 new art. no.

7-60 7 34518576 Keyboard membrane - - discontinued

7-61 - 7700857 Flow measurement set 0.1 - 1.2l/min

770085A Flow meter 1.1 l/min new art. no./modified purchase text




7-122

7-62 - 7702841 DCI cable, external 770284A DCI cable, external new art. no.

7-62 - 7701993 Swab - - discontinued

7-62 - 7702035 Stopcock system with fivestopcocks

770203A Stopcock system with fivestopcocks, incl. lines

new art. no./modified purchase text


7-63 - 7703643 Chip card - Chip card for BSL-Nexadia modified purchase text

7-64 - 3451756A Upgrade kit raised platform - - discontinued

7-64 - 34518991 Upgrade kit high temperaturetubing

- - discontinued

7-65 - 34519831 Retrofit kit SAKA - - discontinued

7-65 - 34518665 Modification set BIC cartridgeholder

- - discontinued

7-65 - 710740A Hardware kit for SW 3.10 - - discontinued

7-65 - 34518649 Hardware kit for SW 3.40/3.46 - - discontinued

7-66 - 770511 Software 3.46 77051A Software 3.46 new art. no.

7-66 - 77003686 Software 6.59 7703686 Software 6.59 corrected art. no.

7-68 - - - 39972445 Silicone tubing 2 x 3, transparent new art. no. (for BIC cartridge holder)

7-68 - - - 34773770 Y-Tubing connector 6 mm new art. no.

7-68 - - - 39237648 Y-Tubing connector 8 mm new art. no.



7-69 - - - 7703708 Grease SKD 4002 new art. no.

7-70 1 34517405 Load cell 3451740A Load cell new art. no.




7-123

7-70 8 - - 34560378 Substitution air detector 2 (SUBAD2)

new art. no.

7-70 9 3451736A Substitution drive board 2 (SAB2) 3451736B Substitution drive board 2 (SAB 2) new art. no.

7-71 1 34517405 Load cell 3451740A Load cell new art. no.

7-71 4 - - 34560378 Substitution air detector 2 (SUBAD2)

new art. no.

7-71 9 3451736A Substitution drive board 2 (SAB2) 3451736B Substitution drive board 2 (SAB 2) new art. no.

7-71 12 3451876A Single load cell board (SLB) 3451876B Single load cell board (SLB) new art. no.

7-73 1 3451789C UP piston pump (HDF bag option) 3451789D Piston pump (HDF bag option) new art. no./modified purchase text

7-78 1 34519467 BIC-KV board 34560149 BIC-KV board new art. no.

7-79 4 3451922A Cover for top housing 34514422 Cover for top housing new art. no.

7-79 - 34570500 Thread forming screw 22 x 12 - - discontinued


7-82 1 34519467 BIC-KV board 34560149 BIC-KV board new art. no.


7-86 1 39237591 Hydrophobe filter 34560661 Hydrophobe filter new art. no.

7-90 - 34518517 Coupling - Coupling (ABPM) modified purchase text

7-92 1 34514872 ABPM module M2005 (integratedinterface board) incl. assemblyangle

3451487A ABPM module M2005 (integratedinterface board) incl. assemblyangle

new art. no.




7-124



7-125

Notes



7-126

Notes



7-127

Notes

Documents

DialogAd Sm Chapter 7-8-2008