Diamondback Tactical 2011

Embed Size (px)

Citation preview

  • 8/3/2019 Diamondback Tactical 2011

    1/34

    CONCEALABLEARMOR

  • 8/3/2019 Diamondback Tactical 2011

    2/34

    Made in the USA

    (800) 882-7667 www. .m

    Lightweight Performance, Ultra Flexibility

    SYNERGYTM

    NIJ .06 CERTIfIEd

  • 8/3/2019 Diamondback Tactical 2011

    3/34

    Diamondback Tactical is certied to ISO 9001/2008 for the design and manufacture of

    soft body armor, hard body armor, structural armor systems, portable armor systems

    and tactical nylon equipment for law enforcement and military use by NQA, an ANAB

    accredited third party registrar.

    Contents and information is subject to change without notice.

    Nominal Weights Listed.

    Certicate Number: 11209

    EAC Code: 04 Made in the USA

    (800) 882-7667 www. .m

    Rev. 4 04.2

    Finally, a vest that doesnt make you compromise. The SynergyTM is a hybrid designed vest that is NIJ .06 certied

    for lightweight performance and ultra exibility. The Synergy II and IIIA provides protection against a variety of

    known threats. In addition, the Synergy IIIA is tested to meet DEA protocol and exceeds military fragmentation

    requirements. For a full-spectrum threat stopper, the Synergy allows you to perform your job without worrying about

    performance or comfort.

    SYNERGYTM

    Ftu:

    Available in a male and female designHigh performance hybrid design using Honeywell advanced

    performance uni-directional ballistic materials

    Heat-sealed fabric cover featuring FX1 Technology available

    exclusively through Diamondback Tactical

    Dynamic carrier offers increased shoulder and waist adjustability

    Compatible with all Diamondback Tactical outer tactical carriers

    Experience Triple Threat Protection with a 5 x 8 or 7 x 9 KAP

    plate (sold separately)

    TesTed and MeeTs dea proTocol

    - 9MM 124gr FMJ- 9MM 127gr +P+SXT

    - .40 S&W 165gr GDHP

    addITIonal specIal THreaT TesTInG

    - .357 Sig SPEER 125gr GDHP- 9mm Aquila 65gr HP

    - 9mm WIN Ranger 127gr SXT HP

    - 7.62 X 25 Tokarev FMJ LC

    - 5.7 X 28 SS 196 40gr (red tip)

    - 5.7 X 28 VMAX 40 gr (blue tip)

    FraGMenTaTIon TesTInG

    2gr RCC4gr RCC

    16gr RCC

    17gr RCC

    64gr RCC

    NOTE: Th thi t it bw i t th sygy (m) Xs6X IIIa onlY

    *All level II performance is tested with a 9mm for V501 and .357 Mag for V502

    **All level IIIA performance is tested with a .357 Sig for V501 and .44 Mag for V502

    nIJ .06 cerTIFIed LEVEL II PERFORMANCE

    Gender Male Female

    NIJ Number Synergy-II XS6X Synergy-II XS6XF

    9mm V50 1735 FPS 1726 FPS

    .357 Mag V50 1662 FPS 1693 FPS

    Areal Density

    Thinness

    nIJ .06 cerTIFIed LEVEL IIIA PERFORMANCE

    Gender Male Female

    NIJ Number Synergy-IIIA XS6X1 Synergy-IIIA XS6XF.1

    .357 Sig V50 1797 FPS 1788 FPS

    .44 Mag V50 1634 FPS 1658 FPS

    Areal Density

    Thinness

    1.07 lb/ft2

    0.79 lb/ft2

    0.34 inches

    0.19 inches

  • 8/3/2019 Diamondback Tactical 2011

    4/34(800) 882-7667 www. .

    COMMITMENT

    &INNOVATION Made in the USA

    Diamondback Tactical is certifed to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    NFORCE-II S6X-06.1(S A)

    PerformAnce At certificAtion

    9mm V50 9mm V501807 fps. 1777 fps

    551 m/s 542 m/s

    2138 rpi 2103 rpi

    1.25 in. N/A in.

    31.7 mm N/A mm

    1660 fps. 1649 fps

    506 m/s 503 m/s1964 rpi. 1951 rpi.

    1.36 in. N/A in.

    34.5 mm N/A mm

    357 Mag V50 357 Mag V50

    357 Mag V50 357 Mag V50357 Mag 357 Mag

    357 Mag BFS 357 Mag BFS

    357 Mag BFS 357 Mag BFS

    9mm V50 9mm V50

    9mm BFS 9mm BFS

    9mm BFS 9mm BFS

    9mm 9mm

    .357 SIG SPEER 125 GR. GOLD DOT HP

    .40 S&W SPEER 165 GR. GOLD DOT HP

    9MM GECO 124 GR. FMJ

    9MM SELLER & BELLOT 115 GR. FMJ

    9MM WINCHESTER RANGER 127 GR. SXT HP

    1521 FPS

    1265 FPS

    1366 FPS

    1377 FPS

    1372 FPS

    36 MM

    37 MM

    33 MM

    30 MM

    35 MM 1635 FPS

    SPeciAl threAt PerformAnce

    Body Armor SPecificAtionS

    Ballistic Standard NIJ0101.06

    NForce-II S6X-06.1

    II

    0.85 lbft2.

    13.52 ozft2

    41.26 grams dM2

    0.29 in.7.37 mm

    Male

    Areal Density

    Thinness

    Gender

    Model Number

    Threat Level

    C1-C5Size Range

  • 8/3/2019 Diamondback Tactical 2011

    5/34(800) 882-7667 www. .

    COMMITMENT

    &INNOVATION Made in the USA

    Diamondback Tactical is certifed to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    17 Grain FSP

    2 Grain RCC

    4 Grain RCC

    16 Grain RCC

    64 Grain RCC

    2157 FPS

    2830 FPS

    2694 FPS

    2174 FPS

    1704 FPS

    NFORCE-IIIA MF34-06

    (S A)

    PerformAnce At certificAtion

    357 SIG V50 357 SIG V501854 fps. 1798 fps

    565 m/s 548 m/s

    1545 rpi 1498 rpi

    1.06 in. N/A in.

    27 mm N/A mm

    1598 fps. 1590 fps

    487 m/s 485 m/s

    1332 rpi. 1325 rpi.

    1.38 in. N/A in.

    35 mm N/A mm

    44 Mag V50 44 Mag V50

    44 Mag V50 44 Mag V50

    44 Mag 44 Mag

    44 Mag BFS 44 Mag BFS

    44 Mag BFS 44 Mag BFS

    357 SIG V50 357 SIG V50

    357 SIG BFS 357 SIG BFS

    357 SIG BFS 357 SIG BFS

    357 SIG 357 SIG

    .357 SIG SPEER 125 GR. GOLD DOT HP

    .40 S&W SPEER 165 GR. GOLD DOT HP

    5.7x28 HORNADY V-MAX 40 GR. BLUE TIP

    7.62x25 TOKAROV FMJ LEAD CORE

    9MM AQUILA 65 GR. HP

    9MM GECO 124 GR. FMJ

    9MM SELLER & BELLOT 115 GR. FMJ

    9MM WINCHESTER RANGER 127 GR. SXT HP

    1543 FPS

    1271 FPS

    1780 FPS

    1588 FPS

    1905 FPS

    1376 FPS

    1382 FPS

    1365 FPS

    31 MM

    32 MM

    21 MM

    29 MM

    26 MM

    28 MM

    27 MM

    28 MM 1803 FPS

    SPeciAl threAt PerformAnce

    Body Armor SPecificAtionS

    Ballistic Standard NIJ0101.06

    NForce-IIIA MF34-06

    IIIA

    1.20 lbft2.

    19.2 ozft2

    58.59 grams dM2

    0.327 in.8.31 mm

    Male

    Areal Density

    Thinness

    Gender

    Model Number

    Threat Level

    C2-C5Size Range

  • 8/3/2019 Diamondback Tactical 2011

    6/34(800) 882-7667 www.

    COMMITMENT

    &INNOVATION Made in the USA

    Diamondback Tactical is certifed to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    TBL-II XS6XF(S A)

    PerformAnce At certificAtion

    9mm V50 9mm V501646 fps. 1619 fps.

    502m/s 493 m/s

    1568 rpi 1542 rpi

    1.25 in. N/A in.

    31.7 mm N/A mm

    1597 fps. 1609 fps.

    487 m/s 490 m/s

    1521 rpi. 1532 rpi.

    1.36 in. N/A in.

    34.5 mm N/A mm

    357 Mag V50 357 Mag V50

    357 Mag V50 357 Mag V50

    357 Mag 357 Mag

    357 Mag BFS 357 Mag BFS

    357 Mag BFS 357 Mag BFS

    9mm V50 9mm V50

    9mm BFS 9mm BFS

    9mm BFS 9mm BFS

    9mm 9mm

    Body Armor SPecificAtionS

    Ballistic Standard NIJ0101.06

    TBL-II XS6XF

    C1-C5

    II

    1.05 lbft2.

    16.8 ozft2

    51.27 grams dM2

    0.237 in.6.02 mm

    Female

    Areal Density

    Thinness

    Gender

    Model Number

    Size Range

    Threat Level

  • 8/3/2019 Diamondback Tactical 2011

    7/34(800) 882-7667 www. .

    COMMITMENT

    &INNOVATION Made in the USA

    Diamondback Tactical is certifed to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    Performance at certification

    357 SIG V50 357 SIG V501828 fps. 1883 fps

    557 m/s 574 m/s

    1164 rpi 1199 rpi

    1.20 in. N/A in.

    30.6 mm N/A mm

    1659 fps. 1692 fps

    506 m/s 516 m/s

    1057 rpi. 1078 rpi.

    1.51 in. N/A in.

    38.4 mm N/A mm

    44 Mag V50 44 Mag V50

    44 Mag V50 44 Mag V50

    44 Mag 44 Mag

    44 Mag BFS 44 Mag BFS

    44 Mag BFS 44 Mag BFS

    357 SIG V50 357 SIG V50

    357 SIG BFS 357 SIG BFS

    357 SIG BFS 357 SIG BFS

    357 SIG 357 SIG

    Body armor SPecificationS

    Ballistic Standard NIJ0101.06

    TBL-IIIA S6X.1

    IIIA

    1.57 lbft2.

    25.12 ozft2

    76.65 grams dM2

    0.389 in.9.8 mm

    Male

    Areal Density

    Thinness

    Gender

    Model Number

    Threat Level

    C2-C5Size Range

    TBL-IIIA S6X.1(S a)

  • 8/3/2019 Diamondback Tactical 2011

    8/34(800) 882-7667 www. .

    COMMITMENT

    &INNOVATION Made in the USA

    Diamondback Tactical is certifed to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    Body Armor SpecificAtionS

    Ballistic Standard NIJ 0115.00

    FCA-K1

    KNIFE 1

    1.32 lbft2.

    21.12 ozft2

    64.45 grams dM2

    0.35 in.8.89 mm

    Male

    P1/S1

    24-36 Joules

    24 Joules

    0 mm

    36 Joules

  • 8/3/2019 Diamondback Tactical 2011

    9/34(800) 882-7667 www. .

    COMMITMENT

    &INNOVATION Made in the USA

    Diamondback Tactical is certied to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    Body Armor SpecificAtionS

    Ballistic Standard NIJ 0115.00

    FCA-K2

    KNIFE 2

    1.65 lbft2.

    26.4 ozft2

    80.56 grams dM2

    0.4 in.10.16 mm

    Male

    P1/S1

    33-50 Joules

    33 Joules

    0 mm

    50 Joules

  • 8/3/2019 Diamondback Tactical 2011

    10/34(800) 882-7667 www. .

    COMMITMENT

    &INNOVATION Made in the USA

    Diamondback Tactical is certifed to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    Body Armor SpecificAtionS

    Ballistic Standard NIJ 0115.00

    FCA-K3

    KNIFE 3

    1.98 lbft2.

    31.68 ozft2

    96.67 grams dM2

    0.47 in.11.94 mm

    Male

    P1/S1

    43-65 Joules

    43 Joules

    0 mm

    65 Joules

  • 8/3/2019 Diamondback Tactical 2011

    11/34(800) 882-7667 www. .

    COMMITMENT

    &INNOVATION Made in the USA

    Diamondback Tactical is certifed to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    Body Armor SpecificAtionS

    Ballistic Standard NIJ 0115.00

    S1FC7

    SPIKE 1

    0.29 lbft2.

    4.64 ozft2

    14.16 grams dM2

    0.068 in.1.73 mm

    Male

    SPIKE

    24-36 Joules

    24 Joules

    0 mm

    36 Joules

    0 mm

    Areal Density

    Thinness

    Gender

    Blade Size

    Test Energy

    Impact Energy 1

    Penetration

    Impact Energy 2

    Penetration 2

    Model Number

    Threat Level

    C1-C5Size Range

    S1FC7(S A)

  • 8/3/2019 Diamondback Tactical 2011

    12/34(800) 882-7667 www. .

    COMMITMENT

    &INNOVATION Made in the USA

    Diamondback Tactical is certifed to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    Body Armor SpecificAtionS

    Ballistic Standard NIJ 0115.00

    S2FC10

    SPIKE 2

    0.42 lbft2.

    6.72 ozft2

    20.51 grams dM2

    0.097 in.2.46 mm

    Male

    SPIKE

    33-50 Joules

    33 Joules

    0 mm

    50 Joules

    0 mm

    Areal Density

    Thinness

    Gender

    Blade Size

    Test Energy

    Impact Energy 1

    Penetration

    Impact Energy 2

    Penetration 2

    Model Number

    Threat Level

    C1-C5Size Range

    S2FC10(S A)

  • 8/3/2019 Diamondback Tactical 2011

    13/34(800) 882-7667 www. .

    COMMITMENT

    &INNOVATION Made in the USA

    Diamondback Tactical is certifed to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    Body Armor SpecificAtionS

    Ballistic Standard NIJ 0115.00

    S3FC16

    SPIKE 3

    0.67 lbft2.

    10.72 ozft2

    32.71 grams dM2

    0.157 in.3.99 mm

    Male

    SPIKE

    43-65 Joules

    43 Joules

    0 mm

    65 Joules

    0 mm

    Areal Density

    Thinness

    Gender

    Blade Size

    Test Energy

    Impact Energy 1

    Penetration

    Impact Energy 2

    Penetration 2

    Model Number

    Threat Level

    C1-C5Size Range

    S3FC16(S A)

  • 8/3/2019 Diamondback Tactical 2011

    14/34

    CONCEALABLEACCESSORIES

  • 8/3/2019 Diamondback Tactical 2011

    15/34(800) 882-7667 www. .com

    COMMITMENT

    &INNOVATION Made in the USA

    Diamondback Tactical is certied to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    ABBREVIATED NIJ TESTING OF ADDITIONAL THREATS - STAND ALONE

    1134 fps 25 mm

    31 mm

    12 mm

    14 mm

    34 mm

    21 mm

    30 mm

    35 mm

    26 mm

    27 mm

    33 mm

    29 mm

    34 mm

    1586 fps

    1465 fps

    1604 fps

    1134 fps

    1223 fps

    1293 fps

    1519 fps

    1780 fps

    1439 fps

    2082 fps

    1826 fps

    Winchester Ranger 9mm 127 gr. SXT + P +

    Aquila 9mm 65 gr. IQ, HP

    Aguila 40 S&W 95 gr. IQ HP

    Aguila 45 cal. IQ HP

    9mm 115 gr. FIOCCHI FMJ

    40 S&W 150 gr. CORBON, JHP

    45 cal. 165 gr. CORBON +P JHP

    357 SIG 115 gr. CORBON

    30 cal. 110 gr. CARBINE FMJ

    SPEER Gold Dot 357 SIG 125 gr. GDHP

    FN5.7x28 Hollow Point

    7.62x25 85 gr. FMJ

    FN5.7x28 RED TIP 1552 fps

    KAP Plate

    (Hard Armor)

    Ability to be worn in conjunction with concealable accommodating a 5 x 8 plate

    pocket. Slides easily into any manufacturers carrier. Instantly upgrades protection

    from ballistic-only to edge-weapon and ballistic protection all in one.

    TRIPLE THREAT PROTECTION:

    ballistic, knife, and spike

    All in one trama plate.

    FEATuRES: Meets Knife 2 / Spike 1 NIJ

    Standards-0115-00

    Independent Stand Alone Ballistic

    Capabilities (see special threat

    rounds listed) Single curve construction conforms

    to bodys shape for comfortable

    use while in car, on-foot pursuit

    and any other on-duty situations

    Wafer thin protection for improved

    survivability in violent attacks

    Built with Fierce Fiber Technology

    which allows for high energy

    impacts to dissipate across the plate Allows for unparalleled protection unlike any

    other product on the market

    Also available in a multi-curve for

    female ofcers

  • 8/3/2019 Diamondback Tactical 2011

    16/34(800) 882-7667 www. .m

    COMMITMENT

    &INNOVATION Made in the USA

    Diamondback Tactical is certied to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    Qay Aa: Diamondback Tactical maintains quality program certied under the ISO 9001:2008 Quality Assurance Certication. The scope of

    certication includes design, manufacture of technologically for advanced personal safety equipment including concealable and tactical bullet resistant

    vests, custom body armor, composite armor, ballistic face/head protection, ballistic shields, police and military apparel.

    LifeShell Plate(Had Am)

    The LifeShell, a double-curved, wafer-thin plate, conforms to the bodys shape

    for comfortable on-duty use. Worn with your ballistic vest, the LifeShell offers

    instant edge-weapon protection. Its FierceFiber technology allows blunt forc-

    es to dissipate across the plate, adding an extra layer of protection on top of

    your existing ballistic panel.

    This technology from Diamondback Tactical can instantly upgrade your protection from standard ballistic stopping power to spike- and edged-weapon

    protection, as tested by an NIJ-approved laboratory, as well as blunt-force trauma protection.

    FeAtures:

    Meets Spike 1 NIJ 0115.00 Standards

    Meets Knife 2 NIJ 0115.00 Standards

    Double-curve construction conforms to bodys shape

    Wafer-thin protection for improved survivability in violent attacks

    Built with Fierce Fiber allowing high-energyimpacts to dissipate

    across the plate

    Can be worn in conjunction with concealable body armor

    Slides into any manufacturers carrier with ease

    tecHnicAl speciFicAtions

    options:

    Sizes: 5 x 8, 7 x 10, 10 x 12, 11 x 13

    Color: Black

    Max. thk

    Aa Dy

    sz

    Max. Wgh

    3.5 mm

    1.4 PSF

    5 x 8

    0.38 lbs 0.56 lbs 0.93 lbs 1.41 lbs

    3.5 mm

    1.4 PSF

    7 x 10

    3.5 mm

    1.4 PSF

    11 x 13

    3.5 mm

    1.4 PSF

    10 x 12

  • 8/3/2019 Diamondback Tactical 2011

    17/34

    CONCEALABLEANDLIGHTTACTICALCARRIERS

  • 8/3/2019 Diamondback Tactical 2011

    18/34(800) 882-7667 www. .com

    COMMITMENT

    &INNOVATION Made in the USA

    Certicate Number: 11209

    EAC Code: 04

    Diamondback Tactical is certied to ISO 9001/2008

    for the design and manufacture of soft body armor

    hard body armor, structural armor systems, por

    table armor systems and tactical nylon equipmen

    for law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    Dynamic Carrier(Armor Carrier)

    One of our most advanced carrier designs, the Dynamic carrier accommodates concealable armor panels, while providing

    front and back, dual plate pockets for upgraded protection. The Dynamic carrier accommodates the KAP plate, LifeShell

    corrections plate and various other steel, titanium or soft armor trauma plates. With a microber outer shell and anti-microbial

    mesh inner lining, the Dynamic carrier is offered in a male and female design. Its low-prole design also offers a unique shoul-

    der lock system, helping to secure shoulder adjustment.

    - Accommodates all Diamondback Tactical concealable armor panels

    - Front and back, dual plate pockets for a variety of ballistic, corrections

    or multi-threat 5X8 and 7X10 plates (plates sold separately)- Microber outer shell provides comfortable stretch for secure t

    - Anti-microbial, moisture-wicking mesh liner

    - Male and female design

    - Hidden, outer zipper for easy insertion of armor panels

    - Shoulder lock system helps secure shoulder adjustment

    - Four (4) inch removable, waist straps for side closure

    - Sized to t custom armor panels

    - Available colors include black, navy and od green

    When paired with a 5X8 or 7X10 triple threat KAP plate, the

    Dynamic carrier allows an ofcer to upgrade to ballistic protection

    of more than 14 special threats, spike 1 protection and stab/knife

    2 protection.

    Enhanced Front and Back Trauma Protection

    Dynamic Duo

    (KAP Plate)

  • 8/3/2019 Diamondback Tactical 2011

    19/34(800) 882-7667 www. .com

    COMMITMENT

    &INNOVATION Made in the USA

    Certicate Number: 11209

    EAC Code: 04

    Diamondback Tactical is certied to ISO 9001/2008

    for the design and manufacture of soft body armor

    hard body armor, structural armor systems, por

    table armor systems and tactical nylon equipmen

    for law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    First Responder(Armor Carrier)

    The Diamondback Tactical First Responder is an external carrier that provides maximum

    load-bearing capabilities using a MOLLE (Modular Lightweight Load-carrying Equipment)

    attachment system. This MOLLE-style carrier allows custom pouch conguration from

    the Diamondback Tactical line of tactical pouches. With front and back plate pockets to

    accommodate 10X12 armor plates, the First Responder offers shoulder and waistadjustability for a secure t.

    - Accommodates all Diamondback Tactical concealable armor panels

    - 360-degree MOLLE attachment systems (pouches sold separately)

    - 500-denier Cordura outer shell for long-lasting durability

    - Front and back 10X12 plate pockets (plates sold separately)

    - Adjustable, inner cummerbund for secure t

    - Sized to t custom armor panels

    - Available colors: Black, Navy, Coyote, OD Green, Multi-Cam and ACU

    Ultimate Load-Bearing, MOLLE-Style External Carrier

  • 8/3/2019 Diamondback Tactical 2011

    20/34(800) 882-7667 www. .com

    COMMITMENT

    &INNOVATION Made in the USA

    Certicate Number: 11209

    EAC Code: 04

    Diamondback Tactical is certied to ISO 9001/2008

    for the design and manufacture of soft body armor

    hard body armor, structural armor systems, por

    table armor systems and tactical nylon equipmen

    for law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    TAS II(Armor Carrier)

    The TAS II (Tactical Assault Shell) is an external carrier that accommodates concealable

    armor panels during light tactical operations. Made of a nylon blend outer shell and inner

    lining for easy maintenance, the TAS II offers left and right side closure for quick donning.

    The TAS II also comes with eight (8) standard sewn-in pouches, a badge holder, small

    and large ID attachment system, and mic clip.

    - Accommodates all Diamondback Tactical concealable armor panels

    - Nylon blend outer shell provides ease of maintenance and repels order

    - Adjustable, inner cummerbund for secure t

    - Eight (8) standard sewn-in pouches, including:

    o Flashlight pouch

    o Handcuff pouch

    o Double M16 magazine pouch

    o 4X8 utility pouch

    o 8X8 utility pouch

    o Universal radio pouch

    o Pepper spray pouch

    o Taser holder pouch

    - Front and back 10X12 plate pockets (plates sold separately)- Sized to t custom armor panels

    - Available colors: Black, Navy and OD Green

    Excellent External Carrier for Light Tactical Operations

  • 8/3/2019 Diamondback Tactical 2011

    21/34(800) 882-7667 www. .com

    COMMITMENT

    &INNOVATION Made in the USA

    Certicate Number: 11209

    EAC Code: 04

    Diamondback Tactical is certied to ISO 9001/2008

    for the design and manufacture of soft body armor

    hard body armor, structural armor systems, por

    table armor systems and tactical nylon equipmen

    for law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    Uniform Shirt Carrier(Armor Carrier)

    The Diamondback Tactical Uniform Shirt Carrier gives ofcers the opportunity to enjoy the

    ease and comfort of an external wear carrier, while also providing the low prole, professional

    appearance of a uniform shirt. The Uniform Shirt can accommodate all Diamondback Tactical

    concealable armor panels. Also, the Uniform Shirt Carrier offers two (2) full chest pockets, a

    badge holder and pen pocket.

    - Accommodates all Diamondback Tactical concealable armor panels

    - Front, internal plate pocket accommodates 5X8 trauma or KAP

    plate

    - Poly-cotton outer shell is machine-washable for easy maintenance

    - Eight (8) inch side closure system

    - Available colors include black and navy

    (custom colors available upon request)

    Protection in Disguise

  • 8/3/2019 Diamondback Tactical 2011

    22/34

    TACTICALVESTS

  • 8/3/2019 Diamondback Tactical 2011

    23/34

    Made in the USA

    (800) 882-7667 www.d .com

    Universal Tactical Outer Carrier

    UTOCTM

  • 8/3/2019 Diamondback Tactical 2011

    24/34

    Diamondback Tactical is certied to ISO 9001/2008 for the design and manufacture of

    soft body armor, hard body armor, structural armor systems, portable armor systems

    and tactical nylon equipment for law enforcement and military use by NQA, an ANAB

    accredited third party registrar. Certicate Number: 11209

    EAC Code: 04 Made in the USA

    (800) 882-7667 www. .com

    The UTOC carrier was engineered to carry and conceal bulky items and gear, while maintaining a casual appearance. It was

    designed with convenience, efciency and durability in mind. This carrier features foam-padded adjustable shoulder straps, as

    well as a unique quilted-comfort spacer mesh on the interior for improved air circulation and extended wearability.

    UTOCTM

    (Universal Tactical Outer Carrier)

    Features:

    Fully adjustable foam-padded shoulder straps with optional NIJ

    level 3A ballistic inserts

    Dri-Lex mesh in shoulder straps for extra comfort and moisture

    wicking

    Padded spacer mesh on vests interior surfaces for maximum

    cooling capability

    Ambidextrous communications channel

    Adjustable cummerbund

    Exterior plate pockets

    Side armor plate pockets

    Front ap pocket with optional available pouches for extra storage

    Optional, matched-to-t concealable carrier for ballistic panels

    available

    May be purchased with QVA-3A ballistic panels that meet the rigid

    FBI standard

    The UTOC is a custom sized vest

    Adjustable cummerbund Side armor plate pockets Padded spacer mesh Communications channel

    Available Colors:

    ACU BK CRYE CYTDTS RG

    Additional ballistic accessorie

    and pouches for use in the fron

    fap are available. Visit www

    diamondbacktactical.com to view

    the details.

  • 8/3/2019 Diamondback Tactical 2011

    25/34

    Special Features

    Integrated and enlarged front flapcummerbund closure

    Reinforced drag handle andDri-Lexadjustable shoulders

    Side armor plate pockets Breathable spacer mesh

    Additional ballistic accessoand pouches for use in thefront flap are available. Viswww.diamondbacktacticato view the details.

    Predator 2, with increased coverage and a higher level of comfort, is far and away the most impressive tactical vest

    on the market today.

    Predator 2 was designed to meet the needs of operators for an all-encompassing tactical vest with

    increased load carry capacity, mobility, speed and ease of adjustability. This vest is NTOA member tested

    and recommended.

    THE PREDATOR BALLISTIC VEST IS LOADED WITH FEATURES:

    SPEAR cut armor for increased ballistic coverage (as used by Special Operations Command)

    Enlarged and integrated front flap external cummerbund closure

    Low profile front flap pouch for additional carry capacity (sidearm, ammo, etc.)

    Super reinforced drag handle

    Extended, adjustable, foam-padded shoulder straps with Dri-Lex lining for increased

    comfort and moisture wicking

    Breathable and durable mesh liner for extra comfort and reduced weight

    Side armor plate pockets

    Soft armor pockets in external cummerbund

    Rigid strength-member along edges of external cummerbund to prevent sagging

    SIZES: Small, Medium, Medium/Long, Large, XL, XLL, XXL, XXLLwww.diamondbacktactical.com 800-735-7030

    PREDATOR 2

  • 8/3/2019 Diamondback Tactical 2011

    26/34

    made in th

    Diamondback Tactical

    Fast Attack Plate Carrier Gen II (F.A.P.C-2)

    The Gen. II Fast Attack Plate Carrier was designedto meet the needs of operators who want a high

    mobility plate carrier with great load carrying

    capacity. The F.A.P.C-2 has 1/4" closed cell foam in

    both the shoulders and upper torso regions to

    relieve load stress on the operators back and

    shoulders. It also allows for quick adjustments and

    modifications when loads, clothing or operational

    positions change. Available options include Side

    Cummerbund System, Side Cummerbund Armor

    Panels (6x 12), Side Plate Pocket Armor Panels

    (6x 8), and Level IIIA Soft Armor Ballistic Inserts.Optional pouches are also available for use in the

    front flap.

    Sizes: Small, Medium, Large and X-Large

    Available Colors:ACU Digital, DTS/ABU Pattern,

    Coyote Brown, Ranger Green, CRYE and Black

    Level 3A Soft Armor Ballistic Inserts

    for the F.A.P.C.-2

    CAT-FAPC

    800- - www. .com

    Optional cummerbund sy

    Reinforced drag handle

    Textured padding

    Integrated front flap poc

    Plate pocket

  • 8/3/2019 Diamondback Tactical 2011

    27/34

    made in th

    Features

    Fully padded shoulders featuring DryLex and a vastly

    improved adjustment system

    Fully lined with a unique, breathable "spacer" material

    allowing increased airflow and reducing thermal load on

    the body

    An integrated and enlarged front flap cummerbund

    closure, featuring a low profile pocket and pouch system

    based on the BattleLab Praetorian RCBV and Predator

    Gen 2 designs

    Improved side closure system featuring "pull forward"

    adjustment

    Reinforced drag handle

    Integrated Soft Armor Ballistics with either

    (QVA-3A, LTA-3A or EMA)

    Optional Integrated soft armor panels for the shoulders

    and armored cummerbund adding increased overall

    protection for the wearer.

    Optional Accessory Features:

    Insertable Low Profile Shoulder Armor Inserts

    Insertable Side Ballistic Panels into Cummerbund

    Integrated cummerbund for Diamondback Tacticals

    patented Side Armor Plate Pocket Design

    Advanced Warrior - Fast Attack Plate Carrier (AW-FAPC)

    The original F.A.P.C. was a great success with thousands currently

    in use by our Military, Law Enforcement, Contractors, Diplomats,OGA, and Coalition Partners. A majority of these customers also

    bought the Fast Attack Rack cummerbund system. With that in

    mind, we have created a vastly improved Rack system. The all-

    new Advanced Warrior Fast Attack Plate Carrier includes the plate

    carrier chassis and the cummerbund. It is more comfortable, a

    better load carry platform, easier to don and adjust, yet remains

    very affordable.

    800- - www. .com

  • 8/3/2019 Diamondback Tactical 2011

    28/34

    HARDARMORRIFLEPLATES

  • 8/3/2019 Diamondback Tactical 2011

    29/34

    Diamondback Tactical is certied to ISO 9001/2008 for the design and manufacture of

    soft body armor, hard body armor, structural armor systems, portable armor systems

    and tactical nylon equipment for law enforcement and military use by NQA, an ANAB

    accredited third party registrar. Certicate Number: 11209

    EAC Code: 04 Made in the USA

    (800) 882-7667 www.diamondbacktactical.com

    As a leader in hard armor technology, Diamondback Tactical offers a line of plates capable of defeating high-

    powered level III and IV ballistic rie threats. All of our hard armor rie plates are tested to NIJ Standard 2005 Interim

    Requirements (2005 IR), and are manufactured from a variety of high-density composites and bers for lightweightcomfort. Upgrade your upper torso protection with state-of-the-art, reliable performance.

    HARD ARMOR RIFLE PLATE TECHNOLOGYPrecision and Performance

    FEATURES & BENEFITS

    VBSS Stand Alone (DY23 III)

    THREAT LEVEL Level III

    WEIGHT/THICKNESS 3.0 lbs (1.36 kgs) REC; 1.56 inches (40 mm)

    AVAILABLE SIZES 10 X 12, 8 X 10, 6 X 8

    SHAPE/CURVE Standard or Shooters Cut; Single Curve

    COMPOSITE Polyethelene/Fiberglass composite with mil-tuff nish

    THREATS 7.62mm X 51mm (NATO) at 2800 fps

    FCA-III-01 In Conjunction With (ICW)

    THREAT LEVEL Level III in conjunction with all DBT IIIA NIJ .06 vests*

    WEIGHT/THICKNESS 3.8 lbs (1.95 kgs) REC; .70 inches (18 mm)

    AVAILABLE SIZES 10 X 12 Only

    SHAPE/CURVE Standard Cut; Single Curve

    COMPOSITE Polyethelene/Fiberglass composite with mil-tuff nish

    THREATS/

    SPECIAL THREATS

    7.62mm X 51mm (NATO) at 2800 fps

    7.62mm X 39mm (AK47 MSC) at 2400 fps; 5.56mm X

    45mm (SS109 Green Tip and M193 Ball) at 3300 fps

    LEVEL III - HARD ARMOR RIFLE PLATES (NIJ 2005 IR)

    Hard armor rie plates tested to defeat

    NIJ Standard 2005 IR.

    High performance composite designs

    for reliable performance and comfort.

    Durable Mil-Tuff nish for protection

    against environmental wear and tear.

    Available in 10 X 12, 8 X 10 or

    6 X 8 sizes, respectively.

    Improved range of motion with optional

    shooters cut (trapezoid) style.

    In Conjunction With rie plates

    available with all DBT level IIIA NIJ .06

    certied soft armor.

    5-year ballistic material warranty/

    18-month workmanship.

    VBBS In Conjunction With (ICW)

    THREAT LEVEL Level III in conjunction with all DBT IIIA .05 IR/NIJ .06 vests*

    WEIGHT/THICKNESS 3.0 lbs (1.36 kgs) REC; .75 inches (19 mm)

    AVAILABLE SIZES 10 X 12, 8 X 10, 6 X 8

    SHAPE/CURVE Standard or Shooters Cut; Single Curve

    COMPOSITE Polyethelene/Fiberglass composite with mil-tuff nish

    THREATS 7.62mm X 51mm (NATO) at 2800 fps

    MULTI-HIT TESTED

    N I J S T A N D A R D

    2005 IR

    LEVEL IV - HARD ARMOR RIFLE PLATE (NIJ 2005 IR)

    THREAT LEVEL Level IV in conjunction with all DBT IIIA NIJ .06 vests*

    WEIGHT/THICKNESS 6.6 lbs (2.99 kgs) REC; .50 inches (13 mm)

    AVAILABLE SIZES 10 X 12, 8 X 10, 6 X 8

    SHAPE/CURVE Standard or Shooters Cut; Single Curve

    COMPOSITE Ceramic composite with mil-tuff nish

    THREATS/

    SPECIAL THREATS

    7.62mm X 63mm (30-06 APM2) at 2900 fps

    7.62mm X 51mm (NATO) at 2800 fps; 7.62mm X 39mm

    (AK47 Black Tip and AK47 MSC) at 2400 fps; 5.56mm X

    45mm (SS109 Green Tip and M193 Ball) at 3300 fps

    FCA FGIV-ICJW In Conjunction With (ICW)

    * original certications tested in conjunction

    with (ICW) N-Force MF34-06 level IIIA

  • 8/3/2019 Diamondback Tactical 2011

    30/34

    Diamondback Tactical is certied to ISO 9001/2008 for the design and manufacture of

    soft body armor, hard body armor, structural armor systems, portable armor systems

    and tactical nylon equipment for law enforcement and military use by NQA, an ANAB

    accredited third party registrar. Certicate Number: 11209

    EAC Code: 04 Made in the USA

    (800) 882-7667 www.diamondbacktactical.com

    For years Diamondback has combined innovation and technology to manufacture high-quality, reliable

    armor. Now, that same level of quality has been engineered into the KAP III+ hard armor rie plate. The

    KAP III+ is tested and certied to the NIJ Standard-0101.06, and is made of heat-compressed layers

    of Honeywell unidirectional ballistic bers, with proprietary ceramic infusion technology. The KAP III+

    provides level III protection and is independently tested to additional rie threats.

    KAP III+ (ICW)NIJ .06 Level III Rife Protection (In Conjunction With NIJ .06 DBT N-Force Level IIIA Vest)

    FEATURES & BENEFITS

    KAP III+ ICW (In conjunction with NIJ .06 DBT N-Force level IIIA vest)

    THREAT LEVEL Level III in conjunction with

    (IIIA only

    WEIGHT/THICKNESS 4.3 lbs (1.95 kgs) REC; 1.0 inches (25.4 mm)

    AVAILABLE SIZES 10 X 12 only

    SHAPE/CURVE Standard Cut; Single Curve

    COMPOSITE Proprietary ceramic-infused technology with mil-tuff

    nish

    THREATS/

    SPECIAL THREATS

    7.62mm X 51mm (NATO) at 2800 fps

    7.62mm X 39mm (AK47 MSC) at 2400 fps;5.56mm X 45mm (SS109 Green Tip and M193

    Ball) at 3300 fps

    Hard armor rie plate tested to defeat NIJ Standard-0101.06.

    Heat-compressed design featuring ceramic-infused technology for reliable performance.

    In Conjunction With design (must be worn with certied N-Force MF34-06 soft armor).

    Available in 10 X 12 size only.

    Increased range of motion with optional shooters cut (trapezoid) style.

    Durable mil-tuff nish for protection against environmental wear and tear.

    5-year ballistic material warranty/ 18-month workmanship.

    LEVEL IV - HARD ARMOR RIFLE PLATE (NIJ 0101.06)

    III+

    RIFLEPROTECTION

  • 8/3/2019 Diamondback Tactical 2011

    31/34

    HARDARMORSHIELDS

  • 8/3/2019 Diamondback Tactical 2011

    32/34(800) 882-7667 www. .com

    COMMITMENT

    &INNOVATION Made in the USA

    Diamodbak Tatia is tid to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    M.U.S.T. Shield

    (Multi Us Shild Tchnology)

    A hIgher level Of prOTecTIOnFeaTUreS:

    Aaiab l III o IIIA

    la, mo utioa iw ot

    fiams a b doyd om it ad t sids

    easi o-u doymt

    Sia sa o dud xosu

    routioay i systm

    easi doymt i od sas

    Mitiats iots w doyd o t oud

    low adjustab sta o t oam

    Tik i dsity oam ad 7 x 11.5 x 1.5 tat

    never loses memory Uiqu velcrO attamt systm

    Sizs: 24 x 36 o 24 x 48

    coos: Bak, rd, Yow

    OPTIONS:

    rmoab t, is ads ottio

    custom tatia ou akas aaiab

    leD Stob lit Systm

    Itatd Baisti Sid co o taii o

    shield deployment, in different colors

    hao its

  • 8/3/2019 Diamondback Tactical 2011

    33/34(800) 882-7667 www. .com

    COMMITMENT

    &INNOVATION Made in the USA

    Diamondback Tactical is ctid to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    O.U.T. Shield

    (Option in Ubn Tin)

    Never OuT Of The fIghT

    T O.u.T. (Opations in uban Tain) ballistic nty sild was catd wit as o s

    in mind for any team member. This shield can be ordered with or without illumination and

    is aailabl in bot Ll III and IIIA.

    FeaTUres:

    Am paddin

    Mltipl it

    Aailabl in bot Ll III and IIIA

    Ll IIIA: Ti-andl

    Ll III: Stait ba andl

    OPTIONs:

    rtntion staps

    Ballistic ision pot 16 x 4

    Cay ba

    roman-styl andl systm

    LeD Stob Lit Systm

    Intatd Ballistic Sild Co o tainin o sild

    deployment, in different colors

    Sizs: 18 x 30, 20 x 36, 20 x 44, 24 x 36, 24 x 48

  • 8/3/2019 Diamondback Tactical 2011

    34/34

    Diamondback Tactical is certied to ISO

    9001/2008 for the design and manufacture

    of body armor and protective equipment fo

    law enforcement and military use by NQA, an

    ANAB accredited third party registrar.

    This Strobe Light System, installed on Diamondback Tactical

    M.U.S.T. or O.U.T. ballistic shields, offers lightweight illumination

    that can be deployed for offensive and defensive maneuvers.

    LIGHT THE FIGHT!

    Strobe light featureS:

    Lightweight design, less than one pound total weight

    Two operating modes, steady or strobe

    Powerful blinding LED light exceeds 90 LUMENS

    Light kit can be added to existing M.U.S.T. or O.U.T.

    shields manufactured by Diamondback Tactical,

    assembly required

    Limited workmanship warranty for one year

    Strobe light can be ordered installed on M.U.S.T. or

    O.U.T. shield

    90 minute run time on full battery charge

    Battery-powered by four 3-Volt lithium batteries

    Ambidextrous hand hold (see inset)

    STROBE LIGHT(fs M.u.S.t. nd o.u.t. Sds)

    tMtM