Upload
others
View
22
Download
1
Embed Size (px)
Citation preview
07.2015
GUTMANN F60+ | 1ProfilesProfile
7
Konstruktionsvorteile F60
• Uf-Werte 0,91 bis 1,3 W/m²K nach DIN EN ISO 10077-2
• Gleiches Profil für Pfosten und Riegel annähernd ohne Verschnitt
• Kontrolliertes Entwässerungssystem über spezielle Riegel-Dichtung
• Hochwärmegedämmte Konstruktion durch PE-Isolator
• Keine Klinkung von Riegel bzw. Pfostenbearbeitung• Rationelle Fertigung und Montage
durch gerade Zuschnitte• Geringe Kantenradien für optisch
einwandfreien inneren Riegel-Anschluß• Einzigartiger Riegelverbinder für spaltfreien
Riegelanschluß an den senkrechten Pfosten• Innere Verglasungsdichtung
umlaufend mit gleicher Ansicht• Erhöhung der statischen Werte durch Einschieben
von handelsüblichen Alu- oder Stahlprofilen
F60 construction advantages
• Uf values 0.91 to 1.3 W/m²K in accorance with DIN EN ISO 10077-2
• Same profile for mullion and transom• Nearly no cut-off• Controlled drainage system via
a special transom gasket• Highly insulated construction due to PE insulator• No notching of mullion or transom• Efficient manufacturing and
installation due to straight cuts• Low edge radius for visually • Flawless inner transom connection -
unique transom connector for gapless mounting to the vertical mullion
• Circumferential interior glazing gasket with identical face
• Improved statical data due to inserted standard steel or aluminum profiles
Die Pfostenriegel-Fassade The mullion-transom curtain wall
Das GUTMANN Fassadensystem erfüllt alle von der Architektur gestellten Anforderun-gen. GUTMANN ist die innovative Systemlösung mit den entscheidenden Vorsprung in Technik und Wirtschaftlichkeit.
The GUTMANN curtain wall system fulfills all architectural requirements. GUTMANN is the innovative system solution with the competitive edge in technology and cost-effectiveness.
07.2015
2 | GUTMANN F60+ ProfilesProfile
7
Konstruktionsbeschreibung
Pfostenriegel-Fassade (Ansichtsbreite 60mm)
Wärmegedämmte Pfostenriegel-Konstruktionen aus stranggepressten Aluminium Profilen mit 60 mm Ansichtsbreite.
System GUTMANN / F 60+
Klassifizierung / Einstufung
• Uf - Werte nach DIN EN ISO 10077 - 2• Widerstandsfähigkeit Windlast EN 13116 2000 Pa / 3000 Pa • Luftdichtigkeit nach EN 12152, Klasse AE• Schlagregendichheit nach EN 12154, statisch RE 900• Stoßfestigkeit nach EN 14019, E5 / I5
Einsetzbar für senkrechte oder geneigte Aluminium-Glas-Fassaden, ein oder mehrge-schossig bis 100 m Gebäudehöhe. Im Grundriß als Gerade oder Polygon ausführbar. Schrägverglasung nur in Abstimmung mit dem Systemgeber.
Die Grundkonstruktion der Pfostenriegel-Fassade ist so konzipiert, daß Pfosten und Riegel aus den gleichen Profilquerschnitten bestehen. Eine Klinkung der Riegelprofile ist nicht erforderlich, wobei die Glasfalz- Entwässerung über die einteilige Riegel-dichtung in die Drainagenut des senkrechten Pfostens erfolgt. Die Anbindung des Riegels erfolgt über eine spezielle patentierte Stoßverbindertechnik. Diese ist so ausgelegt, daß der Riegel selbsttätig an den Pfosten angepresst wird, und somit sich die Anschlußfuge zwischen Riegel und Pfosten schließt.
Verarbeitungsvorteile
Pfosten und Riegelprofile mit raumseitigen Kantenradien von max. 0,5 mm für op-tisch einwandfreien Riegel-Anschluß bei gleicher Bautiefe. Dabei weist die Innenflä-che von Pfosten und Riegelprofil exakt die gleiche Ebene auf.
Die inneren Verglasungsdichtungen bei Pfosten und Riegelprofilen haben die glei-chen Ansichtsbreiten. Die Hohlkammern der Aluminium Pfosten und Riegel sind vor-gerichtet für das Einschieben von Halbzeugprofilen (Rohr - oder Flachquerschnitt) um Stoß- und Befestigungspunkte auszubilden, und um gegebenenfalls die statischen Werte zu erhöhen.
Glasfalzbelüftung bzw. Dampfdruckausgleich über die beidseitigen Drainagenuten im Pfosten, die Belüftung erfolgt jeweils über die vier Feldecken. Äußere Vergla-sungsdichtungen als Einzeldichtungen, wahlweise mit vulkanisierten Endstücken ausführbar. Äußere Druckleisten wahlweise sichtbar oder verdeckt geschraubt; sicht-bar verschraubte Druckleisten als U - Profil oder Flachprofil lieferbar. Deckschalen für verdeckte Verschraubung in unterschiedlichen Bauhöhen lieferbar.
Construction details
Mullion-transom curtain wall (face width 60 mm)
Insulated mullion-transom constructions from extruded aluminum profiles with 60 mm face widths.
System GUTMANN / F 60+
Classification
• Uw values in accordance with DIN EN ISO 10077 - 2• Resistance to wind load EN 13116 2000 Pa / 3000 Pa • Air tightness in accordance with EN 12152. class AE• Resistance to heavy rain in accordance with EN ISO 12154, static
RE 900• Impact resistance in accordance with EN 14019, E5 / I5
Applicable in vertical or sloped aluminum-glass curtain walls, in one or more level buildings with heights up to 100 m. May be constructed straight or in polygon shape. Sloped glazing only in coordination with the system supplier.
The basic structure of the mullion-transom curtain wall is designed so that mullions and transoms consist of the same profile cross-sections. Notching transom profiles is not necessary, as the glass rebate is drained via the one-piece transom gasket into the drainage groove of the vertical mullion. The transom is connected with a special patented joint connector technique. In this technique, the transom is automati-cally pressed onto the mullion, which causes the connection groove between mullion and transom to close.
Advantages in processing
Mullion and transom profiles with room-side edge radii of max. 0.5 mm for visually flawless transom connection of equal construction depth. The level is exactly the same on the interior surfaces of mullion and transom profiles.
The inner glazing gaskets in mullion and transom profiles display the same face widths. The hollow chambers of the aluminum mullions and transoms are prepared for the insertion of semi-finished parts (pipe or flat cross-section) in order to create joints and fastening points und possibly to increase statical values.
Glass groove ventilation and steam pressure balancing occurs via drainage grooves on both sides of the mullion, while ventilation occurs on each of the four section corners. Outer glazing gaskets as individual gaskets, optionally with vulcanized end pieces. Outer pressure strips may either be screwed visibly or concealed; visibly screwed pressure strips are available as U-profiles or flat profiles. Sandwich panels for concealed screwing available in various construction heights.
07.2015
GUTMANN F60+ | 3ProfilesProfile
7
750240
Pfosten /Mullion
Riegel /Transom
750028
Pfosten /Mullion
Riegel /Transom
Detail Zusammenbau Pfosten-Riegel-Stoß Assembly details for mullion-transom joint
Spezielles Konstruktionsdetail für Pfosten-Rie-gel-Verbindung mit spaltfreiem Riegelanschluß an den senkrechten Pfosten. Beim Verschrauben des Riegels am Stoßverbinder wird der Riegel mit der speziellen Profilkennung selbstständig an den Pfosten gedrückt.
Special contruction detail for mullion-transom connections with gapless mounting to the vertical mullion. When screwing the transom to the joint connector, the transom is automatically with the special profile identification pressed tightly onto the mullion.
07.2015
4 | GUTMANN F60+ ProfilesProfile
7
Riegeltransom
Riegeltransom
Entwässerungsprinzip
Die Pfosten-Riegel-Fassade F60+ ist so konstruiert, daß Pfosten und Rie-gel aus den gleichen Profilquerschnitten bestehen können. Gewährleistet wird die Entwässerung vom Riegel in den Pfosten über die Riegeldichtung in die senkrechte Drainagenut des Pfostens und wird von dort nach unten abgeleitet.
Drainage principles
The F60+ mullion-transom curtain wall is designed so that mullions and transoms can consist of the same profile cross-sections. This guarantees drainage from the transom into the mullion via transom gasket into the vertical drainage groove of the mullion and from there downward.
07.2015
GUTMANN F60+ | 5ProfilesProfile
7
Flachprofil Stahloder Aluminiumflat profile steel or aluminum
Einschieblinge in die Pfostenprofile aus handelsüblichen Querschnitten (siehe Einzelprofile)Inserts for mullion profiles from standard cross-sections (also see individual profiles)
Rohrprofil Stahloder Aluminiumpipe profile steel or aluminum
Empfehlung:Einschiebling zur leichteren Montage mit Lack beschichten(Schichtdicke ca. 30 µm)
Recommendation:Coat insert with varnish for easier assembly (coat thickness approx. 30 µm)
Zur statischen Verstärkung können die Trägheitsmomente der Pfosten- und Riegelprofile und der Einschieblinge addiert werden.
For statical reinforcemenet, the moments of inertia of the mullion and transom profiles as well as the inserts may be added.
07.2015
6 | GUTMANN F60+ ProfilesProfile
7
ArtikelnummerItem no.
ProfilmaßProfile dimension
BezeichnungName
ProfilProfile
SeitePage
160055 55 mmPfosten/Riegelmullion/transom
11
160075 *(* auf Anfrage)(* upon request)
75 mmPfosten/Riegelmullion/transom
11
160095 95 mmPfosten/Riegelmullion/transom
12
160115 115 mmPfosten/Riegelmullion/transom
12
160135 135 mmPfosten/Riegelmullion/transom
13
160155 155 mmPfosten/Riegelmullion/transom
14
160195 195 mmPfosten/Riegelmullion/transom
15
160215 215 mmPfosten/Riegelmullion/transom
16
151001 - -VerbindungsprofilConnection profile
28
07.2015
GUTMANN F60+ | 7ProfilesProfile
7
161095 95 mmMontagepfostenmount. mullion
17
161115 115 mmMontagepfostenmount. mullion
17
161135 135 mmMontagepfostenmount. mullion
18
161155 155 mmMontagepfostenmount. mullion
18
162095 95 mmEckpfostencorner mullion
19
164003 - -Basisprofilbase profile
20
169012 12 mmDeckleistecover plate
21
169016 16 mmDeckleistecover plate
21
169020 20 mmDeckleistecover plate
21
07.2015
8 | GUTMANN F60+ ProfilesProfile
7
169313 - -Druckleiste gefülltpressure strip close
22
169210 - -Druckleistepressure strip
22
169030 - -Deckleistecover plate
21
169230 - -Druckleistepressure strip
22
169300 - -Druckleistepressure strip
22/23
169301 - -Druckleistepressure strip
23
169302 - -Druckleiste WK2pressure strip WK2
23
159309 - -Druckleistepressure strip 159309
23
446001 - -Stoßverbinderjoint connector
24
07.2015
GUTMANN F60+ | 9ProfilesProfile
7
446003 - -Montagestoßverbinderassembly joint connectors
24
446004 - -Montageplattemounting panel
24
446005 - -variabler Stoßverbindervariable joint connector
25
465022 - -Einschubprofilinsert profile
26
159404 - -Dachrinnenhaltergutter fastener
28
159405 - -Dachrinnegutter
28
460004 - -GlasauflageGlass seat
29
460005 - -GlasauflageGlass seat
29
460011 - -GlasauflageGlass seat
29
07.2015
10 | GUTMANN F60+ ProfilesProfile
7
460012 - -GlasauflageGlass seat
29
465001 - -Fassadenbefestigungcurtain wall connection
27
465002 - -Justierplatteadjusting plate
27
07.2015
GUTMANN F60+ | 11ProfilesProfile
7
EinschieblingRohr 50/40 mmFlach 50/8 mmInsertpipe 50/40 mmflat 50/8 mm
55
160055
60
160055 Pfosten/Riegel | Mullion/transomLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 351 mm mech.
mech. 170 mm
TrägheitsmomenteMoments of inertia lx 35,99 cm4 ly 28,69 cm4
Verbinder / ConnectorsVerbinderprofil Zuschnittconnectingprofile Cutting
Stoßverbinder760602 446001 39 mm
joint connectorMontagestoßverbinder
760612446003 40,5 mm
assembly joint connector 446004 39 mmvariabler Stoßverbinder
– 446005 39 mmvariable joint connectorEinschubprofil
– 465022 40 mmInsert profile
160075 *Pfosten/Riegel | Mullion/transomLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 391 mm mech.
mech. 210 mm
TrägheitsmomenteMoments of inertia lx 71,40 cm4 ly 36,28 cm4
Verbinder / ConnectorsVerbinderprofil Zuschnittconnectingprofile Cutting
Stoßverbinder760603 * 446001 59 mm
joint connectorMontagestoßverbinder
760613 *446003 60,7 mm
assembly joint connector 446004 59 mmvariabler Stoßverbinder
– 446005 59 mmvariable joint connectorEinschubprofil
– 465022 60 mmInsert profile
* Auf Anfrage* Upon request
160075*
60
75
Insertpipe 60/50 mm **flat 70/8 mm
EinschieblingRohr 60/50 mm **Flach 70/8 mmInsertpipe 60/50 mm **flat 70/8 mm
EinschieblingRohr 60/50 mm **Flach 70/8 mm
** Kein handelsübliches Profil vorhanden** No profile available, that is customary in trade
07.2015
12 | GUTMANN F60+ ProfilesProfile
7
Insertpipe 80/50 mmflat 90/8 mm
EinschieblingRohr 80/50 mmFlach 90/8 mm
95
160095
60
160095 Pfosten/Riegel | Mullion/transomLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 431 mm mech.
mech. 250 mm
TrägheitsmomenteMoments of inertia lx 121,83 cm4 ly 43,67 cm4
Verbinder / ConnectorsVerbinderprofil Zuschnittconnectingprofile Cutting
Stoßverbinder760604 446001 79 mm
joint connectorMontagestoßverbinder
760614446003 80,7 mm
assembly joint connector 446004 79 mmvariabler Stoßverbinder
– 446005 79 mmvariable joint connectorEinschubprofil
– 465022 80 mmInsert profile
Insertpipe 100/50 mmflat 110/8 mm
EinschieblingRohr 100/50 mmFlach 110/8 mm
160115
6011
5
160115 Pfosten/Riegel | Mullion/transomLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 471 mm mech.
mech. 290 mm
TrägheitsmomenteMoments of inertia lx 189,25 cm4 ly 51,01 cm4
Verbinder / ConnectorsVerbinderprofil Zuschnittconnectingprofile Cutting
Stoßverbinder760605 446001 99 mm
joint connectorMontagestoßverbinder
760615446003 100,7 mm
assembly joint connector 446004 99 mmvariabler Stoßverbinder
– 446005 99 mmvariable joint connectorEinschubprofil
– 465022 100 mmInsert profile
07.2015
GUTMANN F60+ | 13ProfilesProfile
7
160135 Keine handelsüblichen Rechteckrohre vorhanden | Industrial rectangular pipes not available
Pfosten/Riegel | Mullion/transomLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 511 mm mech.
mech. 330 mm
TrägheitsmomenteMoments of inertia lx 289,63 cm4 ly 59,54 cm4
Verbinder / ConnectorsVerbinderprofil Zuschnittconnectingprofile Cutting
Stoßverbinder760606 446001 119 mm
joint connectorMontagestoßverbinder
760616446003 120,9 mm
assembly joint connector 446004 119 mmvariabler Stoßverbinder
– 446005 119 mmvariable joint connectorEinschubprofil
– 465022 120 mmInsert profile
135
60
160135
Insertpipe 120/50 mmflat 130/8 mm
EinschieblingRohr 120/50 mmFlach 130/8 mm
07.2015
14 | GUTMANN F60+ ProfilesProfile
7
160155 Keine handelsüblichen Rechteckrohre vorhanden | Industrial rectangular pipes not available
Pfosten/Riegel | Mullion/transomLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 551 mm mech.
mech. 370 mm
TrägheitsmomenteMoments of inertia lx 462,2 cm4 ly 73,67 cm4
Verbinder / ConnectorsVerbinderprofil Zuschnittconnectingprofile Cutting
Stoßverbinder760607 446001 139 mm
joint connectorMontagestoßverbinder
760617446003 140,9 mm
assembly joint connector 446004 139 mmvariabler Stoßverbinder
– 446005 139 mmvariable joint connectorEinschubprofil
– 465022 140 mmInsert profile
155
160155
60
Insert* pipe 140/50 mm flat 150/8 mm
Einschiebling* Rohr 140/50 mm Flach 150/8 mm
* Keine handelsüblichen Rechteckrohre vorhanden* No commercial tubes available.
07.2015
GUTMANN F60+ | 15ProfilesProfile
7
160195 Pfosten/Riegel | Mullion/transomLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 631 mm mech.
mech. 450 mm
TrägheitsmomenteMoments of inertia lx 849,65 cm4 ly 90,66 cm4
Verbinder / ConnectorsVerbinderprofil Zuschnittconnectingprofile Cutting
Stoßverbinder760609 446001 179 mm
joint connectorMontagestoßverbinder
760619446003 181,2 mm
assembly joint connector 446004 179 mmvariabler Stoßverbinder
– 446005 175 mmvariable joint connectorEinschubprofil
– 465022 180 mmInsert profile
195
160195
60
Insert* pipe 180/50 mm
Einschiebling* Rohr 180/50 mm
* Keine handelsüblichen Rechteckrohre vorhanden* No commercial tubes available.
07.2015
16 | GUTMANN F60+ ProfilesProfile
7
160215 Keine handelsüblichen Rechteckrohre vorhanden | Industrial rectangular pipes not available
Pfosten/Riegel | Mullion/transomLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 671 mm mech.
mech. 490 mm
TrägheitsmomenteMoments of inertia lx 1157 cm4 ly 104,8 cm4
Verbinder / ConnectorsVerbinderprofil Zuschnittconnectingprofile Cutting
Stoßverbinder760622 446001 199 mm
joint connectorMontagestoßverbinder
760623446003 201,2 mm
assembly joint connector 446004 199 mmvariabler Stoßverbinder
– 446005 199 mmvariable joint connectorEinschubprofil
– 465022 200 mmInsert profile
215
60
160215
Insert* pipe 200/50 mm
Einschiebling* Rohr 200/50 mm
* Keine handelsüblichen Rechteckrohre vorhanden* No commercial tubes available.
07.2015
GUTMANN F60+ | 17ProfilesProfile
7
95
27
161095
Insertflat 60/8 mmpipe 50/20 mm
EinschieblingFlach 60/8 mmRohr 50/20 mm
161095Montagepfosten | Mounting mullionLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 358 mm mech.
mech. 122 mm
TrägheitsmomenteMoments of inertia lx 60,26 cm4 ly 6,54 cm4
115
27
161115
Insertflat 80/8 mmpipe 70/20 mm *
EinschieblingFlach 80/8 mmRohr 70/20 mm *
161115Montagepfosten | Mounting mullionLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 398 mm mech.
mech. 142 mm
TrägheitsmomenteMoments of inertia lx 102,42 cm4 ly 7,96 cm4
* Kein handelsübliches Profil vorhanden* No profile available, that is customary in trade
07.2015
18 | GUTMANN F60+ ProfilesProfile
7
27
16113513
5
Insertflat 100/8 mmpipe 90/20 mm *
EinschieblingFlach 100/8 mmRohr 90/20 mm *
161135Montagepfosten | Mounting mullionLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 438 mm mech.
mech. 162 mm
TrägheitsmomenteMoments of inertia lx 159,28 cm4 ly 9,34 cm4
155
27
161155
Insertflat 120/8 mmpipe 110/20 mm *
EinschieblingFlach 120/8 mmRohr 110/20 mm *
161155Montagepfosten | Mounting mullionLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 478 mm mech.
mech. 182 mm
TrägheitsmomenteMoments of inertia lx 233,37 cm4 ly 10,77 cm4
* Kein handelsübliches Profil vorhanden* No profile available, that is customary in trade
07.2015
GUTMANN F60+ | 19ProfilesProfile
760
162095
95
95
Insertpipe 80/50 mmflat 90/8 mm
EinschieblingRohr 80/50 mmFlach 90/8 mm
162095 Eckpfosten | Corner mullionLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 622 mm mech.
mech. 260 mm
TrägheitsmomenteMoments of inertia lx 191,77 cm4 ly 107,98 cm4
07.2015
20 | GUTMANN F60+ ProfilesProfile
7
5.5
150
20
Ø5
2522
46
5
164003 U*
164003 U* Ohne Bearbeitung | Without processing
Druckleiste | Pressure stripLieferlängeFactory length 6000 mm
164003Lochbild siehe Skizze | Hole pattern see draft
Druckleiste | Pressure stripLieferlängeFactory length 6000 mm
22
46
5
164003
25
* Auf Anfrage* Upon request
07.2015
GUTMANN F60+ | 21ProfilesProfile
7
12169012169012 Deckleiste | Cover plateLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 165 mm mech.
mech. 84 mm
16169016169016 Deckleiste | Cover plateLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 191 mm mech.
mech. 92 mm
20
169020
169020 Deckleiste | Cover plateLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 207 mm mech.
mech. 100 mm
30
169030
169030 Deckleiste | Cover plateLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 247 mm mech.
mech. 120 mm
07.2015
22 | GUTMANN F60+ ProfilesProfile
7
169313 Druckleiste | Pressure stripLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 140 mm mech.
mech. 60 mm
10
169210
169210 Druckleiste | Pressure stripLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 181 mm mech.
mech. 80 mm
30169230
60
169230 Druckleiste | Pressure stripLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 259 mm mech.
mech. 158 mm
169300169300 Gelocht Ø 6 mm | Punched Ø 6 mm
Druckleiste | Pressure stripLieferlängeFactory length 6000 mm
07.2015
GUTMANN F60+ | 23ProfilesProfile
7
169300169300 L *Druckleiste | Pressure stripGelocht, Langloch 7 x 20 mmPerforated, oblong hole 7 x 20 mmLieferlängeFactory length 6000 mm
169302169302Gelocht Ø 6 mm | Punched Ø 6 mm
Druckleiste | Pressure stripLieferlängeFactory length 6000 mm
6169301
60
169301 Druckleiste | Pressure stripLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 155 mm mech.
mech. 67 mm
159309Druckleiste | Pressure stripLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 112 mm mech.
mech. 52 mm
15930950
* Auf Anfrage* Upon request
07.2015
24 | GUTMANN F60+ ProfilesProfile
7
446001
52
50
446003
34
52
446004
14.5
52
460001 Stoßverbinder | Joint connectorLieferlängeFactory length 6000 mm
460003 Stoßverbinder | Joint connectorLieferlängeFactory length 6000 mm
460004 Stoßverbinder | Joint connectorLieferlängeFactory length 6000 mm
Stoßverbinder in Eigenfertigung siehe VerarbeitungshinweiseSelf-finished joint connectors please see installations instrucitions
07.2015
GUTMANN F60+ | 25ProfilesProfile
7
52 446005
445005Stoßverbinder | Joint connectorLieferlängeFactory length 6000 mm
445005 2*Stoßverbinder | Joint connectorLieferlängeFactory length 2000 mm
* Auf Anfrage* Upon request
Stoßverbinder in Eigenfertigung siehe VerarbeitungshinweiseSelf-finished joint connectors please see installations instrucitions
07.2015
26 | GUTMANN F60+ ProfilesProfile
7
52
200
465022
465022 Einschiebling | Insert profileauch zur Verwendung als Stoß- und Montagestoßverbinder
also usable as joint connector and assembly joint connector
Vor dem Zuschnitt von 465022 und 160055 sind die Ist-Maße am Pfostenprofil zu überprüfen
Please check mullion profile 465022 and 160055 for actual dimen-sions before cutting 465022.
Zuschnitt in mm für RiegelprofilCutting dimensions in mm for transom profile
160055 160075 * 160095 160115 160135 160155 160195 160215
400
600
800
1000
1200
1400
1800
2000
-0,5 -0,5 -0,5 -0,5 -0,5 -0,5 -0,5 -0,5
* Auf Anfrage* Upon request
07.2015
GUTMANN F60+ | 27ProfilesProfile
7
465001
2020
180
80
465002
465002
28
V2A - SchraubeM 12 x 110, DIN 931und Sechskantmutterselbstsichernd M 12,DIN 985
Distanzhülse aus AlurohrAußendurchmesser 16 mmLänge 66 mm
6066
V2A screwM 12 x 110, DIN 931and hexagon nutself-locking M 12,DIN 985
Spacer made of aluminum pipeouter diameter 16 mmlength 66 mm
Die Bohrbilder entnehmen Sie den VerarbeitungshinweisenPlease see processing guidelines for drill templates
465001 Fassadenbefestigung | Curtain wall connectionLieferlängeFactory length 6000 mm
465002 Justierplatte | Adjusting plateLieferlängeFactory length 6000 mm
30
6
465002
07.2015
28 | GUTMANN F60+ ProfilesProfile
7
159404 Dachrinnenhalter | Gutter fastenerLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 158 mm mech.
mech. 19 mm
159405 Dachrinne | GutterLieferlängeFactory length 6000 mm
AbwicklungExecution
eloxal annodized 502 mm mech.
mech. 140 mm
Zubehör für Regenrinne im Kapitel ZubehörSee accessories chapter for gutter accessories
40
15940433
18
70
60
159405
151001Verbindungsprofil | Connection profileLieferlängeFactory length 6000 mm
TrägheitsmomenteMoments of inertia lx 5,44 cm4 ly 1 cm4
07.2015
GUTMANN F60+ | 29ProfilesProfile
7
Glasauflager in Eigenfertigung siehe VerarbeitungshinweiseSelf-finished glass seat please see installations instrucitions
460004
26
460005
34
460011
34
460012
44
460004 Glasauflage | Glass seatLieferlängeFactory length 6000 mm
460005 Glasauflage | Glass seatLieferlängeFactory length 6000 mm
460011 Glasauflage | Glass seatLieferlängeFactory length 6000 mm
460012 Glasauflage | Glass seatLieferlängeFactory length 6000 mm
460004 2*Glasauflage | Glass seatLieferlängeFactory length 2000 mm
460005 2*Glasauflage | Glass seatLieferlängeFactory length 2000 mm
460011 2*Glasauflage | Glass seatLieferlängeFactory length 2000 mm
460012 2*Glasauflage | Glass seatLieferlängeFactory length 2000 mm