Difference between ZMG,Genie and Dingli

ZMG/Genie/Dingli MODEL COMPARISON

ModelsSpecifications GS-3246 ZS1012 JCPT1212

Max Working Height 11.75 m 11.96 m 12.00m

Height stowed fixed rails 2.39 m 2.47 m 2.45 mHeight stowed rails folded 1.80 m 1.83 m 1.91 m

Capacity 318 kg 320 kg 320 kgWidth 1.16 m 1.15 m 1.15 m

Length - stowed 2.44 m 2.47 m 2.48 mSlide-out platform extension deck 0.91 m 1 m 0.90 m

Weight 2,812 kg 2,800 kg 2,945 kg

Note:Following ZMG/GENIE comparison based on above ZMG/GENIE/Dingli models

www.zmglift.com

Scissor Width

ZMG Scissor Width: 910mmGenie Scissor Width: 710mmDingli Scissor Width: 710mm

ZMG advantage:Scissor width bigger, more stability,less waggle, more safety

www.zmglift.com

Platform Extension Size

ZMG Extended platform length: 1000mmGenie Extended platform length: 910mmDingli Extended platform length: 900mm

ZMG advantage:Under the premise of ensuring safety, extended platform longer, easir for approaching.

www.zmglift.com

Connect Type Between Scissor and Platform

ZMG Scissor connect the platform by slider directly , simple, strong, less maintenance, Supporting point in corner/side of platform, more reasonable, more stability, more safety, less waggle

ZMG advantage:more stably, more safety, less waggle, less maintenance

Genie/Dingli Scissor connect the platform by a transition plate, the baseplate easy deformation.Supporting point in the middle of platform, more waggle especially after a period of use

www.zmglift.com

Connect Type Between Scissor and Chassis

ZMG Scissor connect the chassis directly , simple, strong, less maintenance, Supporting point in side of chassis, more reasonable, more stability, more safety, less waggle

ZMG advantage:more stable, more safety, less waggle, less maintenance

Genie/Dingli Scissor connect the chassis by a transition plate, the baseplate easy deformation.Supporting point in middle of platform, more waggle especially after a period of use

www.zmglift.com

Strength of slider pathway

ZMG platform slider pathway with extra reinforcing rib

ZMG advantage:Much more strong , more stably, more safety, less waggle,

ZMG chassis slider pathway:ü Super strong with 8mm steel

sheetü Inside design for anti-collisionü Special two-piece separate

design with forklift lifting hole

Dingli same as Genie, platform slider pathway no reinforcing rib

Genie / Dingli chassis slider pathway:ü with 5mm steel sheetü No inside design，easy

deformation by collisionü One-piece design with

forklift lifting hole, easy deformation

www.zmglift.com

Genie platform slider pathway no reinforcing rib

E-coating processwww.zmglift.com

1.Reinforce on link--ZMG Yes2.Extra 5mm steel reinforce at scissor link which joint with cylinder--ZMG Yes

Reinforce on link--Genie No

ZMG advantage: More stable, more safety, less waggle, less maintenance

112

Reinforce on link--Dingli No

E-coating processwww.zmglift.com

E-coating process--ZMG Yes E-coating process--Genie Yes E-coating process--Dingli No

ZMG/Genie advantage: E-coating process first, after E-coating, then painting again for better anti-corrosion

www.zmglift.com

Connecting Hole Position

ZMG Connecting hole Position---Middle of the tube

Genie Connecting hole Position---Middle of the tube

Dingli Connecting hole Position---Side of the tube

ZMG/Genie advantage: More stable, more safety, less waggle, less maintenance

www.zmglift.com

Thank you