Upload
others
View
9
Download
0
Embed Size (px)
Citation preview
www.digimimic.comOne Company, more solutions
DIGIMIMIC Digital/AnalogParts Portfolio
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 2www.digimimic.com
Goal of this presentation is to quicklyintroduce the customer to DIGIMIMIC company and its digital and analog product family.
The DIGIMIMIC core founder team has been span off from one Co-founder (VP of digital product development in iTerra LLC) and one Senior Engineer of iTerra Communications LLC with the support and blessing of the former mother company.
As matter of fact the starting product portfolio was designed and tested by the same DIGIMIMIC technical team in iTerra Communications using both GaAs HBT and InP HBT. This product portfolio is currently manufactured, under license agreement, using the iTerra Communications LLC mask set.
Introduction (1)
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 3www.digimimic.com
DIGIMIMIC core technical team has also designed fully functional 40G digital dies in InP HBT.
The following Slides will give a glance of the parts functionality, aimed to highlight the signal quality achieved at the output of the individual components.
Introduction (2)
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 4www.digimimic.com
DM4005 – DFF
Assembly Drawing Eye Diagram Performances @ 12.5 Gb/s
Device System Diagram Features
2-13 GHz Clock Frequency Range900 mVpp single ended output dynamic Output Rise time (20%-80%) : 25 psOutput Fall time (20%-80%) : 24 psDC coupled clock inputDC coupled data input50 ohm matched DC coupled data outputLow power consumption :
1 W @ -5.2V (VQH = 0.0V, VQL = -0.9V)0.7 W @ -4.5V (VQH = 0.0V, VQL = -0.6V)0.5 W @ -4.0V (VQH = 0.0V, VQL = -0.4V)
DM4005
DM4005
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 5www.digimimic.com
DM4021 – TFF Gate
D
D
D
D
Q
Q
Q
Q50 Ohm
50 Ohm100 Ohm
100 Ohm
Assembly Drawing Eye Diagram Performances @ 12.5 GHz Clock Input
Device System Diagram FeaturesData rate range: DC up to 20 Gb/s NRZ Maximum Clock Frequency as clock divider: 14 GHz900 mVpp typical single ended output dynamicInput sensitivity: single ended input > 250 mV jitter transfer RMS < 1 psOutput Rise time (20%-80%): < 27 psOutput Fall time (20%-80%): < 24 psDC or AC coupled data input50 ohm matched DC coupled data outputDifferential or single ended inputsDifferential or single ended outputFull SCFL I/O levels compatibilityLow power consumption : 0.71 W
DM4021
DM4021
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 6www.digimimic.com
DM4011 – XOR Gate
Assembly Drawing Eye Diagram Performances @ 10.7 Gb/s NRZ Data Input(Edge Detector Application)
Device System Diagram Features
DM4011
DM4011
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 7www.digimimic.com
DM4031 – 100 ps Phase Delay
Assembly DrawingShifting Capability @ 10.7 Gb/s NRZ Data Input
Device System Diagram FeaturesUltra wideband signal handling: up to 12.5Gb/s NRZDelay adjustment: up to 100ps 900 mV p-p typical single ended output dynamicjitter RMS: < 1.5psOutput Rise time (20% – 80 %): < 23psOutput Fall time (20% – 80 %): < 20ps50Ohm matched DC-coupled inputs50Ohm matched DC-coupled outputsDifferential or single ended I/OsPower consumption: 1.65W
DM4031
DM4031
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 8www.digimimic.com
DM4032 – 50 ps Phase Delay +180° Flipper
Assembly Drawing Shifting Capability @ 12.5 Gb/s NRZ Data Input
Device System Diagram FeaturesUltra wideband signal handling: up to 12.5Gb/s NRZDelay adjustment: up to 50ps Flipping capability (180 degrees shift) 900 mV p-p typical single ended output dynamicjitter RMS: < 1.5psOutput Rise time (20% – 80 %): < 22psOutput Fall time (20% – 80 %): < 20ps50Ohm matched DC-coupled inputs50Ohm matched DC-coupled outputsDifferential or single ended I/OsPower consumption: 1.15W
DM4032
DM4032
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 9www.digimimic.com
DM4033 – Dual Independent 100 ps Phase Delay
iT4033
50 Ohm
100ps tunable delay
CORE2
50 Ohm
VEE2
DIN2
DIN2/
VC2m
DOUT2
DOUT2/
VC2p VC2ref
100ps tunable delay
CORE1
50 Ohm
50 Ohm
60 Ohm
60 Ohm
60 Ohm
60 Ohm
VC1m VC1p VC1ref
DIN1
DIN1/
DOUT1
DOUT1/
VEE1
Assembly Drawing Eye Diagram Performances @ 12.5 Gb/s NRZ Data Input
Device System Diagram FeaturesUltra wideband signal handling: up to 12.5Gb/s NRZDelay adjustment: up to 100ps Dual Independent cores on one single Die900 mV p-p typical single ended output dynamicjitter RMS: < 1.5psOutput Rise time (20% – 80 %): < 21psOutput Fall time (20% – 80 %): < 18ps50Ohm matched DC-coupled inputs50Ohm matched DC-coupled outputsDifferential or single ended I/OsPower consumption: 1.6W (each core)
text560 pF
1 uF
text560 pF
1 uF
iT4033
text560 pF
1 uF
text560 pF
1 uF
text560 pF
1 uF
GND
GND
GND
DIN2
DIN2/
GND
GND
GND
DOUT2
DOUT2/
text560 pF
1 uF
text560 pF
1 uF
text560 pF
1 uF
VEE1
VC1
VEE2
VC2
GND
GND
GND
DIN1
DIN1/
GND
GND
GND
DOUT1
DOUT1/
DM4033
DM4033
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 10www.digimimic.com
DM4050 – LVDS to SCFL 3Gb/s Level Translator
iT4050
100 Ohm
VDD
DIN1
DIN1/50 Ohm
50 Ohm
DOUT1
DOUT1/
VEE
DIN2
DIN2/50 Ohm
50 Ohm
DOUT2
DOUT2/100 Ohm
Assembly Drawing Eye Diagram Performances @ 3 Gb/s NRZ Data Input
Device System Diagram FeaturesWideband signal handling: up to 3.125Gb/s NRZInput sensitivity: 350mV differential450 mV p-p typical single ended output dynamicjitter RMS: < 2psOutput Rise time (20% – 80 %): < 55psOutput Fall time (20% – 80 %): < 55ps100Ohm (differential) matched DC-coupled inputs50Ohm matched DC-coupled outputsDifferential or single ended OutputPower consumption: 140mW per translator
iT4050
text560 pF
1 uF
text560 pF
1 uF
text560 pF
1 uF
VDD1
GND
GND
GND
DIN2
DIN2/
text560 pF
1 uF
GND
GND
GND
DOUT1
DOUT1/
GND
GND
GND
DOUT2
DOUT2/
VDD2
VEE1
VEE2
GND
GND
GND
DIN1
DIN1/
DM4050
DM4050
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 11www.digimimic.com
DM4051 – Rockets I/O to SCFL Level Translator
iT4051
50 Ohm
50 Ohm
VDD
DIN1
DIN1/50 Ohm
50 Ohm
DOUT1
DOUT1/
VEE
VD D
VD D
50 Ohm
50 Ohm
DIN2
DIN2/50 Ohm
50 Ohm
DOUT2
DOUT2/
VD D
VD D
Assembly Drawing Eye Diagram Performances @ 3 Gb/s NRZ Data Input
Device System Diagram FeaturesWideband signal handling: up to 3.125Gb/s NRZInput sensitivity: 500mV single ended450 mV p-p typical single ended output dynamicjitter RMS: < 2psOutput Rise time (20% – 80 %): < 33psOutput Fall time (20% – 80 %): < 33ps50Ohm matched DC-coupled inputs50Ohm matched DC-coupled outputsDifferential or single ended I/OsPower consumption: 175mW per translator
iT4051
text560 pF
1 uF
text560 pF
1 uF
text560 pF
1 uF
VDD1
GND
GND
GND
DIN2
DIN2/
text560 pF
1 uF
GND
GND
GND
DOUT1
DOUT1/
GND
GND
GND
DOUT2
DOUT2/
VDD2
VEE1
VEE2
GND
GND
GND
DIN1
DIN1/
DM4051
DM4051
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 12www.digimimic.com
DM4034 – 1:2 Power Splitter with 100 ps Phase Delay
iT4034
50 Ohm
50 Ohm
VEE
DIN
DIN/
60 Ohm
60 Ohm
DOUT1
DOUT1/
60 Ohm
60 Ohm
DOUT2/
DOUT2
100ps tunabledelay
VC2m VC2p VC2ref
100ps tunabledelay
VC1m VC1p VC1ref
Assembly Drawing Independent Shifting Capability @ 10.7 Gb/s NRZ Data Input
Device System Diagram FeaturesUltra wideband signal handling: up to 12.5Gb/s NRZIndependent delay adjust on each output: 100psHigh Input sensitivity: 300mV single ended900 mV p-p typical single ended output dynamicjitter RMS: < 1.5psOutput Rise time (20% – 80 %): < 20psOutput Fall time (20% – 80 %): < 17ps50Ohm matched DC-coupled inputs50Ohm matched DC-coupled outputsDifferential or single ended I/OsPower consumption: W
iT4034
GND
GND
GND
DIN
DIN/
GN D
GN D
GN D
DOUT1
DOUT1/
GN D
GN D
GN D
DOUT2/
DOUT2
text560 pF
1 uF
text560 pF
1 uF
text560 pF
1 uF
text560 pF
1 uF
VEE
VC2
text560 pF
1 uF
text560 pF
1 uF
text560 pF
1 uF
text560 pF
1 uF
VC1
DM4034
DM4034
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 13www.digimimic.com
DM4035 – 1:4 Power Splitter
iT4035
50 Ohm
50 Ohm
VEE
DIN
DIN/
OUT1/ OUT1
60 O hm 60 Ohm
OUT2/ OUT2
60 O hm 60 Ohm
OUT4/ OUT4
60 Ohm 60 Ohm
OUT3/ OUT3
60 Ohm 60 Ohm
Assembly Drawing Eye Diagram Performances @ 12.5 Gb/s NRZ Data Input
Device System Diagram FeaturesUltra wideband signal handling: up to 12.5Gb/s NRZHigh Input sensitivity: 300mV single ended900 mV p-p typical single ended output dynamicjitter RMS: < 1.5psOutput Rise time (20% – 80 %): < 20psOutput Fall time (20% – 80 %): < 17ps50Ohm matched DC-coupled inputs50Ohm matched DC-coupled outputsDifferential or single ended I/OsPower consumption: 2.0W
text560 pF 1 uF
iT4035
text
560 pF
1 uF
text560 pF
1 uF
text560 pF
1 uF
VEE
GND
GND
GND
DIN
DIN/
text
560 pF
1 uF
text560 pF 1 uF
GND
GND
GND
DO
UT1
/
DO
UT1
GND
GND
GND
DO
UT4/
DO
UT
4
GND
GND
GND
DO
UT2/
DOU
T2
GND
GND
GND
DO
UT3/
DOU
T3
DM4035
DM4035
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 14www.digimimic.com
DM4131 – x2 Clock Multiplier (2-4 GHz)Device System Diagram
Assembly Drawing Eye Diagram Performances @ 2.5 GHz Clock Input
Clock Input range: from 2 GHz up to 4 GHz900 mVpp typical single ended output dynamicInput sensitivity: single ended input > 200mVJitter RMS < 1 ps50 Ohm matched inputs50 Ohm matched outputs (DC)SCFL I/O levels fully compatibleDifferential or single ended I/OsDuty Cycle controlEcho inputs availablePower Consumption: 1.4W
Features
DM4131
DM4131
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 15www.digimimic.com
DM4134 – x2 Clock Multiplier (4-7 GHz)
Assembly Drawing Eye Diagram Performances @ 5 GHz Clock Input
Clock Input range: from 4 GHz up to 7 GHz900 mVpp typical single ended output dynamicInput sensitivity: single ended input > 200mVJitter RMS < 1 ps50 Ohm matched inputs50 Ohm matched outputs (DC)SCFL I/O levels fully compatibleDifferential or single ended I/OsDuty Cycle controlEcho inputs availablePower Consumption: 1.25W
Device System Diagram Features
DM4134
DM4134
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 16www.digimimic.com
DM4122 – 2:1 Mux
Assembly Drawing Eye Diagram Performances @ 12.5 Gb/s Data Output
Device System Diagram Features Output data rate range: DC-12.5 Gb/s900 mVpp typical single ended output dynamicInput sensitivity: single ended input > 300 mV 1.0ps jitter RMS Output Rise time (20%-80%): < 27 psOutput Fall time (20%-80%): < 24 psFull SCFL input levels compatibility50 Ohm matched AC/DC coupled inputs50 Ohm matched AC/DC coupled clock input50 Ohm matched AC/DC coupled Selector input50 Ohm matched DC coupled outputPower consumption: 0.82 W(@ -5V), 0.915 (@-5.2V)
DM4122
DM4122
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 17www.digimimic.com
DM4122A – 2:1 Combinatorial Mux
Assembly DrawingEye Diagram Performances @ 12.5 Gb/s NRZ Data Input
(NRZ to RZ conversion application)
Device System Diagram Features Output data rate range: DC-12.5 Gb/s900 mVpp typical single ended output dynamicInput sensitivity: single ended input > 300 mV 1.2ps jitter RMS Output Rise time (20%-80%): < 27 psOutput Fall time (20%-80%): < 24 psFull SCFL input levels compatibility50 Ohm matched AC/DC coupled inputs50 Ohm matched AC/DC coupled Selector input50 Ohm matched DC coupled outputup to 12.5 Gb/s AND/OR logic gate implementationup to 12.5 Gb/s NRZ to RZ converterup to 12.5 Gb/s input data rate static switchup to 12.5 Gb/s output data rate muxPower consumption: 0.715 W
DM4122A
DM4122A
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 18www.digimimic.com
DM4080 Single chip clock divider by four
Eye Diagram Performances @ 12.5 GHz clock Input
Device Eval Board
Features Input clock rate range: DC-12.5 Gb/s900 mVpp typical single ended output dynamicInput sensitivity: single ended input > 300 mV 1.2ps jitter RMS Output Rise time (20%-80%): < 27 psOutput Fall time (20%-80%): < 24 psFull SCFL input levels compatibility50 Ohm matched AC/DC coupled inputs50 Ohm matched DC coupled outputPower consumption: 1.3 W
Not used
CLK IN
CLK IN\
CLKD2
CLKD4
CLKD4\
GN
D
VEE
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 19www.digimimic.com
DM4120A GaAs HBT 4 to 1 combinatorial Mux
DM4120A on a quick 16 mm package demo board
Selectors DC clips (S0, S0b, S1, S1b)
Southwest High Performance SMA connector
A
B
C
D
VEE DC clips (4 access points)
VEE = -5.0 V (176 mA)Bit Rate = 12.5Gbps
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 20www.digimimic.com
DM3022D GaAs HBT linear buffer
Device System Diagram Features
Buffer function3-dB bandwidth: 10GHzSingle-ended gain: 6 dBStandard bias supply : -5V, +5V Power Consumption: 1.35W1% total harmonic distortion at Pout: 0dBmLow group delayLow jitterCMRR: >20dB at 10GHzAC and DC input coupling (SCFL compatible)AC and DC output coupling
DM3022
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 21www.digimimic.com
DM4006D InP HBT 13.0 DFF
Assembly DrawingEye Diagram Performances @ 12.5 Gb/s
Device System Diagram Features
Supports data rate up to 13 Gb/sFast output rise time (20%-80%) < 22 psFast output fall time (20%-80%) < 20 ps450 mVpp single ended outputDC coupled data and clock inputAC or DC coupled data outputDifferential or single ended inputsLow power consumption: 270 mW
10.709 Gb/s 231-1 PRBS data inputVin = +/-150 mVpp (Data and Clock)
12.5 Gb/s 231-1 PRBS data inputVin = +/-150 mVpp (Data and Clock)
DM4006
DM4006
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 22www.digimimic.com
DM4124 4:1 Mux InP HBT 13.0 Gbps
Eye Diagram Performances @ 12.5 Gb/s(dynamic test 2^31-1)
Device System Diagram Features
Supports data rate DC up to 13 Gb/sFast output rise time (20%-80%) < 22 psFast output fall time (20%-80%) < 20 ps450 mVpp single ended outputDC coupled data and clock inputAC or DC coupled data outputDifferential or single ended inputsLow power consumption: 350 mW
Eye Diagram Performances @ 2.5 Gb/s(dynamic test 2^31-1)
DM4124
DIGIMIMIC confidential – iTerra Part Numbers iTxxyy renamed to DMxxyy 23www.digimimic.com
For any information please contact:
or fax number : +39-06-5587394or land line phone number : + 39-06-5582904
Contacts