Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
KDL-19M4000
3-297-702-11(1) Making Audio/Video ConnectionsYour new TV includes various types of video inputs and two types of audio jacks; RCA type and digital audio (optical). Use the outputs/inputs that are available on your components that provide the best audio/video performances:
Connector typeBest Audio/Video
Performance
Connector typeDIGITAL
AUDIO OUT(OPTICAL)
Digital Audio Out(Optical)
HDMI (High-Definition Multimedia Interface)
Analog Audio Component video
S VIDEO
Composite video
The connection diagrams shown below and on the reverse side are recommendations only; other possible solutions may exist. Connections that include an AV receiver can often be complex, so check your AV receiver’s instruction manual for additional details.
See the “Cables Required” chart that appears with the diagram to determine which cables you’ll need. Depending on the components you plan to connect, you may need to purchase extra cables.
~
~
For Your ConveniencePlease contact Sony directly if you have questions on the use of your television after reading your Quick Setup Guide and Operating Instruction Manual.
Contact Sony Customer Support at:
http://www.sony.com/tvsupport
Or to speak with a support representative:
United States1-800-222-SONY (7669)
Canada1-877-899-SONY (7669)
Please Do Not Return the Product to the Store
©2008 Sony Corporation Printed in China
Quick Setup GuideFor further information, see the Operating Instruction Manual supplied with the TV.Please retain this guide for your future reference.
RGB
AUDIO
AUDIO
AUDIOIN
PC ININ
L(MONO)
VIDEOIN 1
SERVICEONLY
Y
PB
PR
L
R
(1080i/720p/480p/480i)
AUDIO
AUDIO OUT
COMPONENT IN
DIGITAL AUDIO OUT(OPTICAL)
CABLE/ANTENNA
Rear of TV
DVD Player
VCR
Splitter
Cable
PC
Use this diagram if you have;
VCR PlayerDVD PC
RGB
AUDIO
AUDIO
AUDIOIN
PC ININ
L(MONO)
VIDEOIN 1
SERVICEONLY
Y
PB
PR
L
R
(1080i/720p/480p/480i)
AUDIO
AUDIO OUT
COMPONENT IN
DIGITAL AUDIO OUT(OPTICAL)
Rear and Left Side of TV
VID
EO
2 IN
S
VID
EO
VIDE
OL
(MO
NO)
RAU
DIO
CABLE/ANTENNA
VCR
Cable Box orSatellite Receiver
Splitter
Cable
PC
A / V
DVD Player
Cables RequiredSplitter 1Coaxial 4Composite 2Component 1Audio 3
HD15-HD15 1Optical Audio 1
A Cables Required
Splitter 1
Coaxial 3
Composite 1
Component 1
Audio 2
HD15-HD15 1
Use this diagram if you have;
Cable Box VCR PlayerDVD PC AV Receiver
orSatellite Receiver
B
If your DVD player has an HDMI jack, use that instead of the video connections shown here.
If your DVD player or satellite receiver has an HDMI jack, use that instead of the video connections shown here.
If you are not using a cable box or satellite receiver, connect your cable to the VCR’s RF IN jack.
Upgrade your signal to high-definition programming to view the same picture quality at home as you’ve seen in the store. Contact your cable or satellite provider for upgrading to high-definition TV for stunning detail and richer sound.
Please select your language
Initial Setup
English
Español
Français
Initial Setup
First please connect cable or antenna.Allow 50+ minutes for completion.Start auto program now?
OK Cancel
Continued
Initial Setup
Analog Channels Found: 0Digital Channels Found: 0
Please wait. Allow 50+ minutes for completion.Press to cancel.
Cancel
Searching...
Initial Setup
If you want to use air signals, please connect antenna.Allow 50+ minutes for completion.
OK Cancel
Running Initial Setup
1 Select the language for the OSD (on screen display).
2 Connect either cable or antenna to your TV(you can connect both using an A-B RF switch). If you connect cable, the TV will scan cable channels. A�er this scanning, you can search antenna channels as well.
If you have cable and antenna connection available, please connect cable first. If you are not using the VHF/UHF CABLE connection to TV, you can cancel the Auto Program by selecting Cancel.
3 Your TV will detect the type of signal connected and will start scanning for the channels.
4 If the Initial Setup programming found cable channels, you will be able to scan antenna channels as well. Connect the antenna (using an A-B RF switch, not supplied) and change the switch to antenna, then start Auto Program to search antenna channels.
~
~
KDL-19M4000 EN 3-297-702-11(1)
RGB
AUDIO
AUDIO
AUDIOIN
PC ININ
L(MONO)
VIDEOIN 1
SERVICEONLY
Y
PB
PR
L
R
(1080i/720p/480p/480i)
AUDIO
AUDIO OUT
COMPONENT IN
DIGITAL AUDIO OUT(OPTICAL)
Rear and Left Side of TV
VID
EO
2 IN
S
VID
EO
VIDE
OL
(MO
NO)
RAU
DIO
CABLE/ANTENNA
Cable Box
DVD Player
SatelliteReceiver
VCR
Splitter
Cable
SatelliteAntennaCable
Use this diagram if you have;
Cable Box VCR PlayerDVD Satellite Receiver
RGB
AUDIO
AUDIO
AUDIOIN
PC ININ
L(MONO)
VIDEOIN 1
SERVICEONLY
Y
PB
PR
L
R
(1080i/720p/480p/480i)
AUDIO
AUDIO OUT
COMPONENT IN
DIGITAL AUDIO OUT(OPTICAL)
Rear of TV
CABLE/ANTENNA
A / V
Splitter
Cable
Digital Recorder
DVD Player
HD Cable Box orHD Satellite Receiver
CUse this diagram if you have; HD Cable Box Player
DVD AV Receiver Digital Recorder
or
HD Sat Receiver
D
If you are not using a cable box, connect your cable to the VCR’s RF IN jack.
If your DVD player or satellite receiver has an HDMI jack, use that instead of the component/composite video connections.
Cables Required
Splitter 1
Coaxial 5
Composite 3
Component 1
Audio 1
HDMI 1
Cables RequiredSplitter 1Coaxial 4Composite 1Component 1Audio 1HDMI 1Optical Audio 4
RGB
AUDIO
AUDIO
AUDIOIN
PC ININ
L(MONO)
VIDEOIN 1
SERVICEONLY
Y
PB
PR
L
R
(1080i/720p/480p/480i)
AUDIO
AUDIO OUT
COMPONENT IN
DIGITAL AUDIO OUT(OPTICAL)
Rear of TV
CABLE/ANTENNA
VCR
DVD PlayerHD Cable Box orHD Satellite Receiver or HD DVR
Cable
TerrestrialAntenna
Use this diagram if you have;
HD Cable Box VCR PlayerDVD
or
HD Sat Receiver or HD DVR
RGB
AUDIO
AUDIO
AUDIOIN
PC ININ
L(MONO)
VIDEOIN 1
SERVICEONLY
Y
PB
PR
L
R
(1080i/720p/480p/480i)
AUDIO
AUDIO OUT
COMPONENT IN
DIGITAL AUDIO OUT(OPTICAL)
Rear and Left Side of TV
VID
EO
2 IN
S
VID
EO
VIDE
OL
(MO
NO)
RAU
DIO
CABLE/ANTENNA
VCR
Cable Box orSatellite Receiver
/C
Sony DreamSystem
Splitter
Cable
EUse this diagram if you have;
Cable Box VCRSony
Dream System
or
Satellite Receiver
F
For best results, check the cable box’s manual for proper setup of the HD output.
If your HD cable box and DVD player have HDMI jacks, use HDMI with the HD cable box and component video with the DVD player (as shown). This will give you the best possible picture quality.
Cables Required
Coaxial 2
Composite 2
Component 1
Audio 2
HDMI 1
If you are not using a cable box or satellite receiver, connect the cable to the VCR’s RF IN jack.
Cables Required
Splitter 1
Coaxial 4
Composite 2
Component 1
Optical Audio 1
Audio cables must be connected for sound when DVI connector is used.