FEATURES SUMMARY: ■ 10 isolated low voltage motor ports ■ Provides power to SDN Device Ports from internal power supplies. (Bus Power Supply is not needed for non-networked Power Panels) ■ 2 Device Ports isolated from SDN Bus ■ Includes bus segment status LEDs for; • Power • Communication • End of line notification ■ Protects system components from mis-wire ■ Can mount on-wall or in-wall (between studs) ■ Separated line and low-voltage areas ■ Front cover includes two handles with keyed locks ■ cULus Listed TECHNICAL SPECIFICATIONS: ■ Input: Digital Electricity™(DE) from the Digital Electricity™ Transmitter. ■ Motor Output: 24V DC fused at 2A ■ Power Consumption: Consumes 0 units on bus (Consumes power from internal power supplies). Each device port supports 1 device, up to 8 power units. (Bus Power is not needed if Bus In and Out ports are not used) ■ Material: Steel enclosure ■ Dimensions: 19.75” L 14.95” W x 4.14” H (inner) ■ Dimensions: 20.75” L 15.20” W x 5.65” H (inner with door) ■ Maximum Wiring Distance • To motors: ◦ Up to 240ſt per motor port. Somfy requires the use of the SDN Low-voltage Motor Power and Data Cable, available in both Plenum (US: 9020127, Canada: 9020453) and Non-Plenum (US: 9020126, Canada: 9020452) versions • To devices: ◦ Up to 200 ſt. per device port ■ Operating Temperature Range: Ambient temperature ■ Shipping Weight: 26 lbs. ■ Indoor use only CABLE PINOUTS: ■ Digital Electricity™ Power Panel for SDN Includes Digital Electricity™ Receiver (1870520) ■ (10) Low-voltage motor to panel connectors ■ Keys The Digital Electricity™ Power Panel for SDN is a Somfy Digital Network™ (SDN) bus distribution component used to add 10 isolated motor ports and two isolated device ports to an SDN bus segment. This Power Panel is power by a Digital Electricity™(DE) transmitter and receives input power from Digital Electricity instead of standard 120V AC line-voltage. The isolated motor ports support up to 240 feet of power and data wiring to Somfy's range of low-voltage SDN motors. The in-wall or on-wall mountable enclosure offers easily accessible line and low-voltage areas for simplified of installation. This product can be used in small SDN systems with two control devices and 10 individual motors as a stand-alone solution and large scale SDN or animeo® IP systems. OVERVIEW: WHAT’S IN THE BOX: SOMFY DIGITAL NETWORK SYSTEM OVERVIEW: Somfy Digital Network™ (SDN) is Somfy’s intelligent wired shading network. An SDN system is comprised of bus distribution devices that create a network for user interfaces, motorized applications and sensors to be connected. SDN is scalable and suitable for both small and large projects. The same components are used whether an SDN system remains standalone, integrated into third party automation systems, or with Somfy’s animeo® IP automated total solar management system. Digital Electricity ™ Power Panel for SDN Item #: 1870628 CONNECTIONS AND INDICATORS: LED Indicators LABEL ELEMENT COLOR FUNCTION ON FUNCTION OFF P Bus Power Green Power No Power H Bus High (I) Green No Data Data L Bus Low (A) Green Data No Data E End of Bus Yellow End of Bus Not End of Bus D Device LED Green Device port powered Device port not powered Isolated Motor Port Front view E 5 2 3 D D P L H 4 D 5 Power + Power - Data + Data - Ground Motor Input Connector 1 - Data + 2 - Data - 3 - Reserved 4 - Power + 5 - Power + 6 - Reserved 7 - Ground - 8 - Ground - SDN Input Motor Input Power + Power - Data + Data - Ground Orange = SDN RS485 (-) Orange/white = SDN RS485 (+) Red = power (+) Black = power (-) Brown = ground SDN RS485 Silver = Drain D DIGITAL ELECTRICITY™ (DE) OVERVIEW: Digital Electricity™ is a Limited Power Source which allows it to utilize standard 12-18AWG multi-conductor cabling, without conduit, while conforming to the National Electric Code standards for building installations (NOTE: Always follow local codes). The Digital Electricity™ Range are listed products, certified to safety and EMC standards by a Nationally Recognized Test Laboratory. NOTE: use connector included with this power panel Non-plenum Rated: US: 9020126 Canada: 9020452 Plenum Rated: US: 9020127 Canada: 9020453 Required conductors for SDN SDN Low-voltage Motor Power and Data Cable 24V DC/SDN Control 5 Conductor Cable ELEMENT FUNCTION 1 Power Input Screw terminal block. Only use 14AWG solid or stranded. 2 SDN Bus Input Input for bus signals 3 SDN Bus Output Output for bus signals 4 Isolated Motor Port 10 low voltage motors to SDN network 5 Device Ports Connect SDN Device to Power Panel (1 SDN Device per port. Max. 200 ſt. each)
FEATURES SUMMARY: 10 isolated low voltage motor ports Provides
power to SDN Device Ports from
internal power supplies. (Bus Power Supply is not needed for
non-networked Power Panels)
2 Device Ports isolated from SDN Bus Includes bus segment status
LEDs for;
• Power • Communication • End of line notification
Protects system components from mis-wire Can mount on-wall or
in-wall (between studs) Separated line and low-voltage areas Front
cover includes two handles with
keyed locks cULus Listed
TECHNICAL SPECIFICATIONS: Input: Digital Electricity™(DE) from the
Digital Electricity™ Transmitter. Motor Output: 24V DC fused at 2A
Power Consumption: Consumes 0 units on bus (Consumes power
from
internal power supplies). Each device port supports 1 device, up to
8 power units. (Bus Power is not needed if Bus In and Out ports are
not used)
Material: Steel enclosure Dimensions: 19.75” L 14.95” W x 4.14” H
(inner) Dimensions: 20.75” L 15.20” W x 5.65” H (inner with door)
Maximum Wiring Distance
• To motors: Up to 240ft per motor port. Somfy requires the use of
the SDN
Low-voltage Motor Power and Data Cable, available in both Plenum
(US: 9020127, Canada: 9020453) and Non-Plenum (US: 9020126, Canada:
9020452) versions
• To devices: Up to 200 ft. per device port
Operating Temperature Range: Ambient temperature Shipping Weight:
26 lbs. Indoor use only
CABLE PINOUTS:
Digital Electricity™ Power Panel for SDN Includes Digital
Electricity™ Receiver (1870520)
(10) Low-voltage motor to panel connectors Keys
The Digital Electricity™ Power Panel for SDN is a Somfy Digital
Network™ (SDN) bus distribution component used to add 10 isolated
motor ports and two isolated device ports to an SDN bus segment.
This Power Panel is power by a Digital Electricity™(DE) transmitter
and receives input power from Digital Electricity instead of
standard 120V AC line-voltage. The isolated motor ports support up
to 240 feet of power and data wiring to Somfy's range of
low-voltage SDN motors. The in-wall or on-wall mountable enclosure
offers easily accessible line and low-voltage areas for simplified
of installation. This product can be used in small SDN systems with
two control devices and 10 individual motors as a stand-alone
solution and large scale SDN or animeo® IP systems.
OVERVIEW:
WHAT’S IN THE BOX:
SOMFY DIGITAL NETWORK SYSTEM OVERVIEW: Somfy Digital Network™ (SDN)
is Somfy’s intelligent wired shading network. An SDN system is
comprised of bus distribution devices that create a network for
user interfaces, motorized applications and sensors to be
connected. SDN is scalable and suitable for both small and large
projects. The same components are used whether an SDN system
remains standalone, integrated into third party automation systems,
or with Somfy’s animeo® IP automated total solar management
system.
Digital Electricity™ Power Panel for SDN Item #: 1870628
CONNECTIONS AND INDICATORS:
H Bus High (I) Green No Data Data
L Bus Low (A) Green Data No Data
E End of Bus Yellow End of Bus Not End of Bus
D Device LED Green Device port powered Device port not
powered
Isolated Motor Port
Motor Input Connector
1 - Data + 2 - Data - 3 - Reserved 4 - Power + 5 - Power + 6 -
Reserved 7 - Ground - 8 - Ground -
SDN Input Motor Input
Silver = Drain
Data and Power Cable 24V DC / SDN Control 5 conductor cable
Somfy SDN Low-voltage Motor Cable
9020127 - Plenum Rated
D
DIGITAL ELECTRICITY™ (DE) OVERVIEW: Digital Electricity™ is a
Limited Power Source which allows it to utilize standard 12-18AWG
multi-conductor cabling, without conduit, while conforming to the
National Electric Code standards for building installations (NOTE:
Always follow local codes). The Digital Electricity™ Range are
listed products, certified to safety and EMC standards by a
Nationally Recognized Test Laboratory.
NOTE: use connector included with this power panel
Non-plenum Rated: US: 9020126 Canada: 9020452
Plenum Rated: US: 9020127 Canada: 9020453
Required conductors for SDN
SDN Low-voltage Motor Power and Data Cable 24V DC/SDN Control 5
Conductor Cable
ELEMENT FUNCTION
1 Power Input Screw terminal block. Only use 14AWG solid or
stranded.
2 SDN Bus Input Input for bus signals
3 SDN Bus Output Output for bus signals
4 Isolated Motor Port 10 low voltage motors to SDN network
5 Device Ports Connect SDN Device to Power Panel (1 SDN Device per
port. Max. 200 ft. each)
www.somfysystems.com
RoHS IP65
HAZARDOUS VOLTAGE2.56"
[65mm] 3.78"
20.75
15.20
SDN Low-voltage Motor Power and Data Cable
SDN Low-voltage Motor Power and Data Cable
Sonesse® 30 RS485 DCSonesse® 50 ULTRA RS485 DC Irismo™ 35 Mini
DC
SDN Ir is
N Power Panel
DE Transmitter
DE Receiver
The diagram shown below is meant for illustrative purposes to show
the connections from product to product. This device could be used
in other configurations than shown below. For specification
information on individual products see related product information.
Follow all SDN wiring standards for distance limitations.
Adds 10 isolated motor ports and 2 isolated device ports to a
system. Each device port supports 1 device, up to 8 power units
Motor wiring distance up to 240 ft per motor port. Somfy requires
the use of the SDN Low-voltage Motor Power and Data Cable,
available in both
Plenum (US: 9020127, Canada: 9020453) and Non-Plenum (US: 9020126,
Canada: 9020452) versions from Somfy. Maximum 200 ft. per isolated
device port.
NOTE: Provides power to SDN Device Ports from internal power
supplies. Consumes power from internal power supplies. (Bus Power
is not needed if Bus In and Out ports are not used)
R TS
RTS Transmitter
M O
TO R
S B
U S
D IS
TR IB
U TIO
N U
S E
R IN
TE R
FA C
E S
SDN Low-voltage Motor Power and Data Cable
SDN Low-voltage Motor Power and Data Cable
Sonesse® 30 RS485 DCSonesse® 50 ULTRA RS485 DC Irismo™ 35 Mini
DC
SD N Power Panel
Co py
rig ht
S om
fy S
ys te
m s,
In c.
8 /2
02 0
The Digital Electricity™ Receiver is a component in a Digital
Electricity™(DE) line powering system. When paired with a Digital
Electricity™(DE) transmitter unit, a Digital Electricity™(DE)
system is formed (see diagram). If a person or foreign conductor
comes in contact with the DE wiring, power is disconnected;
preventing fire, equipment damage and personal injury. The safety
features of the DE system allow it to be operated as an
IEC-60950-21 compatible limited power source over standard
multi-conductor cabling, without conduit, while conforming to the
National Electric Code standards for building installations. This
Receiver provides up to 3A at a nominal output voltage of
336VDC.
OVERVIEW:
Digital Electricity™ Receiver Item #: 1870520 (Included in Digital
Electricity™ Power Panel for SDN)
DIGITAL ELECTRICITY™ (DE) OVERVIEW: Digital Electricity™ is a
Limited Power Source which allows it to utilize standard 12-18AWG
multi-conductor cabling, without conduit, while conforming to the
National Electric Code standards for building installations (NOTE:
Always follow local codes). The Digital Electricity™ Range are
listed products, certified to safety and EMC standards by a
Nationally Recognized Test Laboratory.
FEATURES SUMMARY: Safe to the touch electrical distribution Extend
power distribution to 1,000 ft. per output port
*Max distance is dependent on the installation and gauge of the
cabling used between the Transmitter and Receiver.
Use 12-18 AWG cable to distribute power The Digital Electricity™
Receiver is designed into the Digital Electricity Power Panel for
SDN (1870628) The Digital Electricity Receiver features over and
under voltage, over-current, short circuit and over-temperature
protection Features a compact design with mounting tabs that allow
for easy installation within the Somfy Power Panel for SDN
TECHNICAL SPECIFICATIONS: Input Voltage: 310-350V (336V
Nominal),
*Must be supplied by listed Digital Electricity™ Transmitter
• Number of Channels: 1 • Current Per Input Channel: 3A MAX • Input
Wire Gauge: 12-18AWG *Factory installed cable whips are 18AWG
• Input Cable Diameter: 0.105”-0.315” (2.7mm-8.0mm) (includes
insulation) Output Voltage: 315-350 V (336 V Nominal) - Digital
Electricity™
• Number of output channels: 1 • Current: 3.0A Max • Efficiency @
max load: 96% - AE to DE Conversion Efficiency • Continuous
Operating Output Power 1000 W • Max Distance:(from Transmitter)
1,000 ft.
*Max distance is dependent on the installation and gauge of the
cabling used between the Transmitter and Receiver.
Environment: • Operating Temperature: -4°F (-20°C) to 104°F (40°C)
• Exposure Ratings: IP65 • Altitude: Up to 6,600 ft. (2000m) •
Humidity: 5 to 95 %
Dimensions: 4.72” x 4.05” x 1.79” (120 x 103 x 45.5 mm) Weight: 1
lbs. (2.2 kg) Approvals:
• Safety: IEC 60950-1 NRTL SZAA (Bureau Veritas)
• Electro-magnetic compliance: CFR 47 FCC Part 15 Class A (USA) EN
55022 - Class A EN 55024
• Environmental: RoHS • General: CE
Normal Operation
Boot-up Start-up sequence occurs when power is first applied to the
receiver.
Pre-charge DE Part of normal start-up sequence
Pre-charge Load Part of normal start-up sequence
FAULTS LED PATTERN FAULT CODE TROUBLESHOOTING LOAD CONNECTION 2
Blinks Connection problem between receiver output and load
Check receiver output polarity Check connections to load
OVERLOAD 3 Blinks Load Current too high Reduce Load Check
wiring
TRANSMITTER 4 Blinks Transmitter Power Problem Check transmitter
card(s) Check wiring from transmitter
TEMPERATURE 5 Blinks Receiver over temperature Reduce ambient temp
surrounding receiver Reduce Load
SHORT CIRCUIT 6 Blinks Short Circuit detected between receiver and
load Check wiring Check load for short circuit or ground
fault
INTERNAL FAILURE 8 Blinks Internal hardware Failure Contact
Voltserver
INDICATORS: (SEE LED WINDOW ON DRAWING IN DIMENSIONS)
Pin Color Description 1 White DE Input Neg (-) 2 Black DE Input Pos
(+) 3 Green Not Used
Pin Color Description 1 White 336V Out Pos (+) 2 Black 336V Out Pos
(+) 3 Green Ground
Pre-terminate input cable whip pin-out Pre-terminate output cable
whip pin-outInput Connection to Digital Electricity Transmitter:
Output Connection to Power Panel for SDN:
Negative (-)
Positive (+)
Green = ground
BEST WIRING PRACTICES: The diagram shown below is meant for
illustrative purposes to show the connections from product to
product. This device could be used in other configurations than
shown below. For specification information on individual products
see related product information. Follow all SDN wiring standards
for distance limitations.
Each Digital Electricity Transmitter adds 8 isolated power ports to
operate a Digital Electricity Power Panel for SDN (1870628) in a
system. - Only one Digital Electricity Receiver can be connected to
each DE Output Port on the Digital Electricity Transmitter
Digital Electricity wiring distance up to 1,000 ft. per port
between Digital Electricity Transmitter and Digital Electricity
Receiver using 12-18 AWG 2 conductor cable. *Max distance is
dependent on the installation and gauge of the cabling used between
the Transmitter and Receiver.
Important: Refer to product specification sheet for use of the
Power Panel for SDN (1870628)
4.72" [120mm]
RoHS IP65
HAZARDOUS VOLTAGE2.56"
[65mm] 3.78"
1.79" [45mm]
4.72" [120mm]
2.56" [65mm]
3.78" [96mm]
1.79" [45mm]
LED WINDOW
P O
W E
R D
IS TR
IB U
TI O
SDN Low-voltage Motor Power and Data Cable
SDN Low-voltage Motor Power and Data Cable
Sonesse® 30 RS485 DCSonesse® 50 ULTRA RS485 DC Irismo™ 35 Mini
DC
SDN Ir is
SD N Power Panel
SDN Low-voltage Motor Power and Data Cable
SDN Low-voltage Motor Power and Data Cable
Sonesse® 30 RS485 DCSonesse® 50 ULTRA RS485 DC Irismo™ 35 Mini
DC
SD N Power Panel
Co py
rig ht
S om
fy S
ys te
m s,
In c.
8 /2
02 0