http://www.elastix.org

Digium D40 and Elastix Server

Setup Guide

http://www.elastix.org

Digium D40 and Elastix Server

Setup Guide

http://www.elastix.org

Digium D40 and Elastix Server

Setup Guide

PaloSanto SolutionsDigium D40 Server Setup Guide

2

1.0 Setup DiagramFigure 1-1 is a setup diagram for a single IP Phone Digium D40 configuration.The phone is setup as a SIP telephony device.

Figure 1-1. Setup Diagram

2.0 Host PC EnvironmentTable 2-1. Host Server Environment Details

DescriptionHardware Type Elastix Appliance ELX-Series

Hardware Version ELX-3000Software Type Elastix

Software Version 2.3

3.0 Test Setup EquipmentTable 3-1. Test Setup Equipment

Equipment Model VersionIP (SIP) Phone N/A N/A

Digium D40 1_0_5_46476Switch N/A N/A

PaloSanto SolutionsDigium D40 Server Setup Guide

2

1.0 Setup DiagramFigure 1-1 is a setup diagram for a single IP Phone Digium D40 configuration.The phone is setup as a SIP telephony device.

Figure 1-1. Setup Diagram

2.0 Host PC EnvironmentTable 2-1. Host Server Environment Details

DescriptionHardware Type Elastix Appliance ELX-Series

Hardware Version ELX-3000Software Type Elastix

Software Version 2.3

3.0 Test Setup EquipmentTable 3-1. Test Setup Equipment

Equipment Model VersionIP (SIP) Phone N/A N/A

Digium D40 1_0_5_46476Switch N/A N/A

PaloSanto SolutionsDigium D40 Server Setup Guide

2

1.0 Setup DiagramFigure 1-1 is a setup diagram for a single IP Phone Digium D40 configuration.The phone is setup as a SIP telephony device.

Figure 1-1. Setup Diagram

2.0 Host PC EnvironmentTable 2-1. Host Server Environment Details

DescriptionHardware Type Elastix Appliance ELX-Series

Hardware Version ELX-3000Software Type Elastix

Software Version 2.3

3.0 Test Setup EquipmentTable 3-1. Test Setup Equipment

Equipment Model VersionIP (SIP) Phone N/A N/A

Digium D40 1_0_5_46476Switch N/A N/A

PaloSanto SolutionsDigium D40 Server Setup Guide

3

4.0 Setup ProcedureTo set up the Elastix Server for the Digium D40,1. Go to the web address of the Elastix Server Login page. The web address isdetermined by the customer, for this guide we have used the IP address 192.168.5.1862. On the Login page, type the username and password for an administrative user intothe Username and Password fields, see Figure 4-1. The username and password aredetermined by the customer.

Figure 4-1. Login

3. Press Enter or click on the Submit button to go to Elastix’s Dashboard

4. Once inside, click on the PBX tab on the menu at the top of the screen

Figure 4-2. Dashboard

PaloSanto SolutionsDigium D40 Server Setup Guide

4

5. Click on the Submit button to add an extension, see Figure 4-3. This will take you tothe Add SIP Extension page.

Figure 4-3. Add an Extension

6. On the Add SIP Extension page (Figure 4-4), fill in the following information:

• User Extension (301 in this example)• Display Name (‘DigiumD40’ in this example)• secret (‘h7Dka3Rf9si0t’ in this example)

Figure 4-4. Add SIP Extension

7. Click on the ‘Submit’ button at the end of the page. The extension will be created andyou will see the page on Figure 4-5 displaying the “Apply Configuration Changes Here”pink ribbon on top of the screen.

PaloSanto SolutionsDigium D40 Server Setup Guide

4

5. Click on the Submit button to add an extension, see Figure 4-3. This will take you tothe Add SIP Extension page.

Figure 4-3. Add an Extension

6. On the Add SIP Extension page (Figure 4-4), fill in the following information:

• User Extension (301 in this example)• Display Name (‘DigiumD40’ in this example)• secret (‘h7Dka3Rf9si0t’ in this example)

Figure 4-4. Add SIP Extension

7. Click on the ‘Submit’ button at the end of the page. The extension will be created andyou will see the page on Figure 4-5 displaying the “Apply Configuration Changes Here”pink ribbon on top of the screen.

PaloSanto SolutionsDigium D40 Server Setup Guide

4

5. Click on the Submit button to add an extension, see Figure 4-3. This will take you tothe Add SIP Extension page.

Figure 4-3. Add an Extension

6. On the Add SIP Extension page (Figure 4-4), fill in the following information:

• User Extension (301 in this example)• Display Name (‘DigiumD40’ in this example)• secret (‘h7Dka3Rf9si0t’ in this example)

Figure 4-4. Add SIP Extension

7. Click on the ‘Submit’ button at the end of the page. The extension will be created andyou will see the page on Figure 4-5 displaying the “Apply Configuration Changes Here”pink ribbon on top of the screen.

PaloSanto SolutionsDigium D40 Server Setup Guide

5

8. Click in the “Apply Configuration Changes Here” link

Figure 4-5. Apply Configuration Changes Here

9. With this you have just finished creating a SIP extension that will be used by theDigium D40 to register with the Elastix Server. Repeat Steps 5 through 8 to similarlycreate another extension (different values on Step 6) to be used by the IP (SIP) Phone toregister as well (extension 302 in this example). Once finished you will see somethingsimilar to Figure 4-6

Figure 4-6. Digium and IP Phone extensions successfully created

10. To register the Digium Phone, you will need to enter the information from theextension created on the Elastix Server into the Digium Phone by logging into theDigium D40 WebUI.

Log into the Digium D40 WebUI by pointing your browser to the Digium Phone’s IPaddress.

For the initial configuration, refer to the Digium D40 User Guide which can be found inthe Digium D40 product page at: http://www1.digium.com/en/products/ip-phones/d40

Factory default settings

IP Addressing DHCPWeb Access User Name adminWeb Access Password 789

11. When prompted, enter the Web Access Username and Web Access Password toaccess the Digium D40 WebUI (Figure 4-7).

PaloSanto SolutionsDigium D40 Server Setup Guide

6

Figure 4-7. Digium D40 WebUI

12. Use the information from the Add SIP Extension page (Figure 4-4) to enter thefollowing necessary information on “Lines => Line 1“ section of the Digium PhoneWebUI:

User ID/Extension: (301 in this example) Authorization Name: (301 in this example) Line Label on Phone: The local phone name showed on others phones when

calling (DigiumD40 in this example) Register: YES Password: (‘h7Dka3Rf9si0t’ in this example) IP Address or Hostname: Elastix Server’s IP Address (192.168.5.186 in this

example) Port: 5060

Figure 4-8. Account Configuration

13. Once you have entered the required information, click on ‘Submit Phone Settings’button located at the end of the page. If the phone is not able to register, make sureyou’ve entered the correct information.

14. Configure the other IP (SIP) Phone with the correct parameters.

PaloSanto SolutionsDigium D40 Server Setup Guide

7

15. To test the Digium D40, pick up the previously configured IP (SIP) Phone and callthe Digium D40’s extension number (301 in this example). When the call is established,speak into the phone and verify that the other IP (SIP) Phone can hear your voice.Check this by calling from both ends.

This step completes the procedure.