DIN規格 --- 2019-09月新刊情報 · 2019. 9. 26. · DIN EN IEC 62474*VDE 0042-4:2019 Material declaration for products of and for the electrotechnical industry (IEC 62474:2018);

DIN 2019-9 新刊情報(1/20page)

DIN規格 --- 　 2019-09 月　新刊情報　 ---

規格番号原文表題

DIN EN IEC 61967-1*VDE 0847-21-1:2019

Integrated circuits - Measurement of electromagnetic emissions - Part 1: Generalconditions and definitions (IEC 61967-1:2018); German version EN IEC 61967-1:2019

14,465円 (本体13,150円)

DIN EN IEC 62474*VDE0042-4:2019

Material declaration for products of and for the electrotechnical industry (IEC62474:2018); German version EN IEC 62474:2019

18,612円 (本体16,920円)

DIN EN ISO 12625-1:2019

Tissue paper and tissue products - Part 1: Vocabulary (ISO 12625-1:2019); Germanversion EN ISO 12625-1:2019

22,968円 (本体20,880円)

DIN EN ISO 15708-1:2019

Non-destructive testing - Radiation methods for computed tomography - Part 1:Terminology (ISO 15708-1:2017); German version EN ISO 15708-1:2019

11,374円 (本体10,340円)

DIN EN ISO 18451-1:2019

Pigments, dyestuffs and extenders - Terminology - Part 1: General terms (ISO 18451-1:2019); German and English version EN ISO 18451-1:2019

26,026円 (本体23,660円)

DIN ISO 10110-14:2019Optics and photonics - Preparation of drawings for optical elements and systems -Part 14: Wavefront deformation tolerance (ISO 10110-14:2018)

18,018円 (本体16,380円)

DIN ISO 10110-18:2019Optics and photonics - Preparation of drawings for optical elements and systems -Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae (ISO10110-18:2018)

22,968円 (本体20,880円)


DIN EN ISO 20976-1:2019

Microbiology of the food chain - Requirements and guidelines for conducting challengetests of food and feed products - Part 1: Challenge tests to study growth potential, lagtime and maximum growth rate (ISO 20976-1:2019); German version EN ISO 20976-1:2019

27,324円 (本体24,840円)

DIN IEC/IEEE62659:2019

Nanomanufacturing - Large scale manufacturing for nanoelectronics (IEC/IEEE62659:2015)

18,018円 (本体16,380円)


DIN 6862-2:2019Identification and characterization of radiological images in medical diagnosis - Part 2:Passing on of radiographs and related records in digital radiography, digital fluoroscopy,cone-beam computed tomography and computed tomography

21,318円 (本体19,380円)

DIN EN ISO 11073-10425:2019

Health informatics - Personal health device communication - Part 10425: Devicespecialization - Continuous glucose monitor (CGM) (ISO/IEEE 11073-10425:2019);English version EN ISO 11073-10425:2019

43,252円 (本体39,320円)

11 医療技術

定価(本体価格)

日本規格協会グループ

＊規格はICS分類別に掲載しております。分類は1つの規格に対して複数付けられる場合があります。　そのため、一覧の規格数は実際の出版規格数より多くなっていることがございますのでご注意ください。＊ここに掲載している規格は原則としてドイツ語版です。＊ご注文は末尾の注文書をご利用ください。

01 総論．用語．標準化．ドキュメンテーション


07 数学．自然科学


JSA Japanese Standards Association ＊本表記載の規格のご購入につきましては、当協会本部までFAXにてご注文願います。


DIN EN ISO 4049:2019Dentistry - Polymer-based restorative materials (ISO 4049:2019); German version ENISO 4049:2019

27,324円 (本体24,840円)

DIN EN ISO 80601-2-61:2019

Medical electrical equipment - Part 2-61: Particular requirements for basic safety andessential performance of pulse oximeter equipment (ISO 80601-2-61:2017, Correctedversion 2018-02); German version EN ISO 80601-2-61:2019

50,094円 (本体45,540円)


DIN 14664:2019 Firefighting and fire protection - Fire brigade control panel for emergency microphone 21,318円 (本体19,380円)

DIN 19639:2019 Soil protection during planning and execution of construction projects 31,262円 (本体28,420円)

DIN EN 13071-1:2019Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 1:General requirements; German version EN 13071-1:2019

21,318円 (本体19,380円)

DIN EN 13071-2:2019Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 2:Additional requirements for underground or partly underground systems; Germanversion EN 13071-2:2019

18,018円 (本体16,380円)

DIN EN 13274-7:2019Respiratory protective devices - Methods of test - Part 7: Determination of particlefilter penetration; German version EN 13274-7:2019

16,368円 (本体14,880円)

DIN EN 13381-7:2019Test methods for determining the contribution to the fire resistance of structuralmembers - Part 7: Applied protection to timber members; German version EN 13381-7:2019

43,252円 (本体39,320円)

DIN EN 1366-13:2019Fire resistance tests for service installations - Part 13: Chimneys; German version EN1366-13:2019

21,318円 (本体19,380円)

DIN EN 15269-11:2019

Extended application of test results for fire resistance and/or smoke control for door,shutter and openable window assemblies, including their elements of building hardware- Part 11: Fire resistance for operable fabric curtains; German version EN 15269-11:2018+AC:2019

44,506円 (本体40,460円)

DIN EN 16868:2019Ambient air - Sampling and analysis of airborne pollen grains and fungal spores fornetworks related to allergy - Volumetric Hirst method; German version EN 16868:2019

27,324円 (本体24,840円)

DIN EN 60825-2 Beiblatt2*VDE 0837-2 Beiblatt2:2019

Safety of laser products - Part 2: Safety of optical fibre communication systems(OFCS); Supplement 2: Interpretation Sheet 2 (IEC 60825-2:2004/ISH2:2018)

3,223円 (本体2,930円)

DIN EN IEC 60204-11*VDE 0113-11:2019

Safety of machinery - Electrical equipment of machines - Part 11: Requirements forequipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV (IEC60204-11:2018); German version EN IEC 60204-11:2019

24,178円 (本体21,980円)

DIN EN IEC 62474*VDE0042-4:2019


18,612円 (本体16,920円)

DIN EN ISO 12010:2019Water quality - Determination of short-chain polychlorinated alkanes (SCCP) in water- Method using gas chromatography-mass spectrometry (GC-MS) and negative-ionchemical ionization (NCI) (ISO 12010:2019); German version EN ISO 12010:2019

31,262円 (本体28,420円)

13 環境．健康予防．安全





DIN 45669-1:2019Measurement of vibration immissions - Part 1: Vibration meters - Requirements andtests

36,652円 (本体33,320円)

DIN 6801-1:2019Procedures of dosimetry with probe-type detectors for proton and ion radiation - Part1: Ionization chambers

37,840円 (本体34,400円)

DIN EN ISO 286-1:2019Geometrical product specifications (GPS) - ISO code system for tolerances on linearsizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013);German version EN ISO 286-1:2010 + AC:2013

28,556円 (本体25,960円)

DIN EN ISO 286-2:2019Geometrical product specifications (GPS) - ISO code system for tolerances on linearsizes - Part 2: Tables of standard tolerance classes and limit deviations for holes andshafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013

32,692円 (本体29,720円)

DIN EN ISO 28927-8:2019

Hand-held portable power tools - Test methods for evaluation of vibration emission -Part 8: Saws, polishing and filing machines with reciprocating action and small sawswith oscillating or rotating action (ISO 28927-8:2009 + Amd.1:2015 + Amd.2:2019);German version EN ISO 28927-8:2009 + A1:2015 + A2:2019

27,324円 (本体24,840円)


DIN EN ISO 15708-1:2019

Non-destructive testing - Radiation methods for computed tomography - Part 1:Terminology (ISO 15708-1:2017); German version EN ISO 15708-1:2019

11,374円 (本体10,340円)

DIN EN ISO 15708-2:2019

Non-destructive testing - Radiation methods for computed tomography - Part 2:Principles, equipment and samples (ISO 15708-2:2017); German version EN ISO15708-2:2019

21,318円 (本体19,380円)

DIN EN ISO 15708-3:2019

Non-destructive testing - Radiation methods for computed tomography - Part 3:Operation and interpretation (ISO 15708-3:2017); German version EN ISO 15708-3:2019

22,968円 (本体20,880円)

DIN EN ISO 15708-4:2019

Non-destructive testing - Radiation methods for computed tomography - Part 4:Qualification (ISO 15708-4:2017); German version EN ISO 15708-4:2019

18,018円 (本体16,380円)

DIN ISO 9276-4:2019Representation of results of particle size analysis - Part 4: Characterization of aclassification process (ISO 9276-4:2001 + Amd.1:2017)

19,756円 (本体17,960円)


DIN 3996:2019Calculation of load capacity of cylindrical worm gear pairs with rectangular crossingaxes

36,652円 (本体33,320円)

DIN 7477:2019 Plain bearings - Lubrication pockets for thick-walled multilayer plain bearings 9,768円 (本体8,880円)

DIN 85339:2019 Hexagon head screw plugs - With retaining pin and bleeding hole 13,112円 (本体11,920円)

19 試験


21 一般的に利用される機械的システム及びその構成要素


17 度量衡及び測定．物理的現象





DIN EN 12807:2019LPG equipment and accessories - Transportable refillable brazed steel cylinders forliquefied petroleum gas (LPG) - Design and construction; German version EN12807:2019

24,640円 (本体22,400円)

DIN EN 13445-3/A7:2019

Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2014/A7:2019 14,740円 (本体13,400円)

DIN EN 13445-3/A8:2019

Unfired pressure vessels - Part 3: Design; German version EN 13445-3:2014/A8:2019 31,262円 (本体28,420円)

DIN EN 1401-1:2019Plastics piping systems for non-pressure underground drainage and sewerage -Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittingsand the system; German version EN 1401-1:2019

28,556円 (本体25,960円)

DIN EN IEC 60665*VDE0705-665:2019

A.C. ventilating fans and regulators for household and similar purposes - Methods formeasuring performance (IEC 60665:2018); German version EN IEC 60665:2019

10,219円 (本体9,290円)

DIN EN ISO 14414:2019Pump system energy assessment (ISO/ASME 14414:2019); German version EN ISO14414:2019

35,178円 (本体31,980円)

DIN EN ISO 6149-1:2019Connections for hydraulic fluid power and general use - Ports and stud ends with ISO261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2019); German version EN ISO 6149-1:2019

16,368円 (本体14,880円)


DIN EN ISO 14174:2019Welding consumables - Fluxes for submerged arc welding and electroslag welding -Classification (ISO 14174:2019); German version EN ISO 14174:2019

21,318円 (本体19,380円)

DIN EN ISO 15620:2019Welding - Friction welding of metallic materials (ISO 15620:2019); German version ENISO 15620:2019

29,964円 (本体27,240円)

DIN EN ISO 17279-1:2019

Welding - Micro joining of 2nd generation high temperature superconductors - Part 1:General requirements for the procedure (ISO 17279-1:2018); German version EN ISO17279-1:2018

31,262円 (本体28,420円)

DIN EN ISO 17279-2:2019

Welding - Micro joining of 2nd generation high temperature superconductors - Part 2:Qualification for welding and testing personnel (ISO 17279-2:2018); German version ENISO 17279-2:2018

22,968円 (本体20,880円)

DIN EN ISO 24598:2019Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification(ISO 24598:2019); German version EN ISO 24598:2019

22,968円 (本体20,880円)

DIN EN ISO 28927-8:2019

Hand-held portable power tools - Test methods for evaluation of vibration emission -Part 8: Saws, polishing and filing machines with reciprocating action and small sawswith oscillating or rotating action (ISO 28927-8:2009 + Amd.1:2015 + Amd.2:2019);German version EN ISO 28927-8:2009 + A1:2015 + A2:2019

27,324円 (本体24,840円)

DIN EN ISO 5171:2019Gas welding equipment - Pressure gauges used in welding, cutting and allied processes(ISO 5171:2019); German version EN ISO 5171:2019

19,756円 (本体17,960円)

25 生産工学


23 一般的に利用される流体システム及びその構成要素





DIN EN 17127:2019Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporatingfilling protocols; German version EN 17127:2018

19,756円 (本体17,960円)

DIN EN IEC 62933-2-1Berichtigung 1*VDE0520-933-2-1Berichtigung 1:2019

Electrical energy storage (EES) systems - Part 2-1: Unit parameters and testingmethods - General specification (IEC 62933-2-1:2017/COR1:2019); German versionEN IEC 62933-2-1:2018/AC:2019

DIN EN ISO 12800:2019Nuclear fuel technology - Guidelines on the measurement of the specific surface areaof uranium oxide powders by the BET method (ISO 12800:2017); German version ENISO 12800:2019

14,740円 (本体13,400円)


DIN EN 50064*VDE0670-803:2019

High-voltage switchgear and controlgear - Gas-filled wrought aluminium and aluminiumalloy enclosures; German version EN 50064:2018

15,631円 (本体14,210円)

DIN EN 50069*VDE0670-805:2019

High-voltage switchgear and controlgear - Gas-filled welded composite enclosures ofcast and wrought aluminium alloys; German version EN 50069:2018

11,649円 (本体10,590円)

DIN EN 50341-2-4*VDE0210-2-4:2019

Overhead electrical lines exceeding AC 1 kV - Part 2-4: National Normative Aspects(NNA) for GERMANY (based on EN 50341-1:2012); German version EN 50341-2-4:2019

30,888円 (本体28,080円)

DIN EN 60598-1Berichtigung 1*VDE0711-1 Berichtigung1:2019

Luminaires - Part 1: General requirements and tests; (IEC 60598-1:2014, modified +A1:2017); German version EN 60598-1:2015 + A1:2018; Corrigendum 1

DIN EN IEC 60079-0*VDE 0170-1:2019

Explosive atmospheres - Part 0: Equipment - General requirements (IEC 60079-0:2017); German version EN IEC 60079-0:2018

41,316円 (本体37,560円)

DIN EN IEC 60204-11*VDE 0113-11:2019

Safety of machinery - Electrical equipment of machines - Part 11: Requirements forequipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV (IEC60204-11:2018); German version EN IEC 60204-11:2019

24,178円 (本体21,980円)

DIN EN IEC 62474*VDE0042-4:2019


18,612円 (本体16,920円)




3,223円 (本体2,930円)

DIN EN IEC 60384-21:2019

Fixed capacitors for use in electronic equipment - Part 21: Sectional specification -Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 (IEC 60384-21:2019); German version EN IEC 60384-21:2019

33,924円 (本体30,840円)

DIN EN IEC 60384-22:2019

Fixed capacitors for use in electronic equipment - Part 22: Sectional specification -Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 (IEC 60384-22:2019); German version EN IEC 60384-22:2019

33,924円 (本体30,840円)

-

-

31 エレクトロニクス


27 エネルギー及び熱伝達工学


29 電気工学




DIN EN IEC 60512-1*VDE 0687-512-1:2019

Connectors for electrical and electronic equipment - Tests and measurements - Part1: Generic specification (IEC 60512-1:2018); German version EN IEC 60512-1:2018

10,219円 (本体9,290円)

DIN EN IEC 61967-1*VDE 0847-21-1:2019


14,465円 (本体13,150円)

DIN EN IEC 62474*VDE0042-4:2019


18,612円 (本体16,920円)


DIN EN 13757-4:2019Communication systems for meters - Part 4: Wireless M-Bus communication; Englishversion EN 13757-4:2019

45,760円 (本体41,600円)

DIN EN 300132-2:2019

Environmental Engineering (EE) - Power supply interface at the input of Informationand Communication Technology (ICT) equipment - Part 2: -48 V Direct Current (DC)(Endorsement of the English version EN 300 132-2 V2.6.1 (2019-04) as a Germanstandard)

3,828円 (本体3,480円)

DIN EN 301841-2:2019VHF air-ground Digital Link (VDL) Mode 2 - Technical characteristics and methods ofmeasurement for ground-based equipment - Part 2: Upper layers (Endorsement of theEnglish version EN 301 841-2 V1.2.1 (2019-05) as a German standard)

3,828円 (本体3,480円)

DIN EN 303345-1:2019Broadcast Sound Receivers - Part 1: Generic requirements and measuring methods(Endorsement of the English version EN 303 345-1 V1.1.1 (2019-06) as a Germanstandard)

3,828円 (本体3,480円)

DIN EN 50117-9-1*VDE0887-9-1:2019

Coaxial cables - Part 9-1: Sectional specification for coaxial cables for analogue anddigital signal transmission - Indoor drop cables for systems operating at 5 MHz - 1 000MHz; German version EN 50117-9-1:2019

10,934円 (本体9,940円)

DIN EN 50117-9-2*VDE0887-9-2:2019


10,934円 (本体9,940円)

DIN EN 50117-9-3*VDE0887-9-3:2019


10,934円 (本体9,940円)

DIN EN 50377-14-1:2019

Connector sets and interconnect components to be used in optical fibrecommunication systems - Product specifications - Part 14-1: Simplex and duplexcords made from simplex plugs with cylindrical ferrules, using EN 60793-2-50 single-mode B1 or B6 fibre for Category C according to EN 61753-1; German version EN50377-14-1:2018

22,968円 (本体20,880円)

DIN EN 55016-4-2*VDE0876-16-4-2:2019

Specification for radio disturbance and immunity measuring apparatus and methods -Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentationuncertainty (CISPR 16-4-2:2011 + Cor. 1:2013 + A1:2014 + A2:2018 +A2:2018/COR1:2019); German version EN 55016-4-2:2011 + A1:2014 + A2:2018 +A2:2018/AC:2019

30,085円 (本体27,350円)



3,223円 (本体2,930円)

DIN EN 61000-6-5Berichtigung 1*VDE0839-6-5 Berichtigung1:2019

Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity forequipment used in power station and substation environment (IEC 61000-6-5:2015/COR1:2017); German version EN 61000-6-5:2015/AC:2018-01

DIN EN 61970-452:2019Energy management system application program interface (EMS-API) - Part 452: CIMstatic transmission network model profiles (IEC 61970-452:2017); English version EN61970-452:2017

85,074円 (本体77,340円)

-

33 電気通信工学．オーディオ及びビデオ工学




DIN EN 62351-7*VDE0112-351-7:2019

Power systems management and associated information exchange - Data andcommunications security - Part 7: Network and System Management (NSM) dataobject models (IEC 62351-7:2017); German version EN 62351-7:2017

48,928円 (本体44,480円)

DIN EN IEC 61967-1*VDE 0847-21-1:2019


14,465円 (本体13,150円)

DIN EN IEC 62087-7*VDE 0868-107:2019

Audio, video, and related equipment - Methods of measurement for power consumption- Part 7: Computer Monitors (IEC 62087-7:2018); German version EN IEC 62087-7:2019

13,167円 (本体11,970円)

DIN EN IEC 63135:2019

Maritime navigation and radiocommunication equipment and systems - Automaticidentification systems (AIS) - SAR Airborne equipment - Operational and performancerequirements, methods of test and required test results (IEC 63135:2018); Englishversion EN IEC 63135:2019

44,506円 (本体40,460円)


DIN 15584-1:2019Digital cinema - Image Projection - Part 1: Image geometries, their tolerances and testpatterns

21,318円 (本体19,380円)

DIN 15782:2019 Media and sound technology - Structured media cabling systems 21,318円 (本体19,380円)

DIN EN 13757-4:2019Communication systems for meters - Part 4: Wireless M-Bus communication; Englishversion EN 13757-4:2019

45,760円 (本体41,600円)

DIN EN 16815:2019CleANopen - Application profile for municipal vehicles; English version EN 16815:2019,only on CD-ROM

114,224円 (本体103,840円)

DIN EN 302636-5-1:2019

Intelligent Transport Systems (ITS) - Vehicular Communications - GeoNetworking -Part 5: Transport Protocols - Sub-part 1: Basic Transport Protocol (Endorsement ofthe English version EN 302 636-5-1 V2.2.1 (2019-05) as a German standard)

3,828円 (本体3,480円)

DIN EN 302890-1:2019Intelligent Transport Systems (ITS) - Facilities layer function - Part 1: ServicesAnnouncement (SA) specification (Endorsement of the English version EN 302 890-1V1.2.1 (2019-07) as a German standard)

3,828円 (本体3,480円)

DIN EN 319532-3:2019Electronic Signatures and Infrastructures (ESI) - Registered Electronic Mail (REM)Services - Part 3: Formats (Endorsement of the English version EN 319 532-3 V1.2.1(2019-04) as a German standard)

3,828円 (本体3,480円)

DIN EN 61970-452:2019Energy management system application program interface (EMS-API) - Part 452: CIMstatic transmission network model profiles (IEC 61970-452:2017); English version EN61970-452:2017

85,074円 (本体77,340円)

DIN EN 62325-451-3:2019

Framework for energy market communications - Part 451-3: Transmission capacityallocation business process (explicit or implicit auction) and contextual models forEuropean market (IEC 62325-451-3:2014 + A1:2017); German version EN 62325-451-3:2014 + A1:2017

99,022円 (本体90,020円)

DIN EN 62351-7*VDE0112-351-7:2019

Power systems management and associated information exchange - Data andcommunications security - Part 7: Network and System Management (NSM) dataobject models (IEC 62351-7:2017); German version EN 62351-7:2017

48,928円 (本体44,480円)

DIN EN ISO 11073-10425:2019

Health informatics - Personal health device communication - Part 10425: Devicespecialization - Continuous glucose monitor (CGM) (ISO/IEEE 11073-10425:2019);English version EN ISO 11073-10425:2019

43,252円 (本体39,320円)

35 情報技術．事務機械





DIN 15584-1:2019Digital cinema - Image Projection - Part 1: Image geometries, their tolerances and testpatterns

21,318円 (本体19,380円)

DIN 58772:2019 Production in optical engineering - Coating rings - General requirements 8,030円 (本体7,300円)

DIN ISO 10110-14:2019Optics and photonics - Preparation of drawings for optical elements and systems -Part 14: Wavefront deformation tolerance (ISO 10110-14:2018)

18,018円 (本体16,380円)

DIN ISO 10110-18:2019Optics and photonics - Preparation of drawings for optical elements and systems -Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae (ISO10110-18:2018)

22,968円 (本体20,880円)


DIN EN ISO 9202:2019Jewellery and precious metals - Fineness of precious metal alloys (ISO 9202:2019);German version EN ISO 9202:2019

11,374円 (本体10,340円)


DIN EN 16652-2:2019LPG equipment and accessories - Automotive LPG vehicles workshops - Part 2:Personnel competence and training; German version EN 16652-2:2019

18,018円 (本体16,380円)

DIN EN 16815:2019CleANopen - Application profile for municipal vehicles; English version EN 16815:2019,only on CD-ROM

114,224円 (本体103,840円)


DIN EN 16186-4:2019Railway applications - Driver's cab - Part 4: Layout and access; German version EN16186-4:2019

28,556円 (本体25,960円)

DIN EN 16922:2019Railway applications - Ground based services - Vehicle waste water dischargeequipment; German version EN 16922:2017+A1:2019

21,318円 (本体19,380円)

DIN EN 17069-1:2019Railway applications - Systems and procedures for change of track gauge - Part 1:Automatic Variable Gauge Systems; German version EN 17069-1:2019

26,026円 (本体23,660円)


DIN 85387-1:2019Ships and marine technology - Loose flanges and welding necks extra light duty - Part1: Loose flanges DN 32 to DN 50, PN up to 25, DN 65 to DN 125, PN up to 10

9,768円 (本体8,880円)

37 映像技術


43 自動車工学


45 鉄道工学


39 精密機械．宝石類


47 造船及び海洋構造物




DIN 85387-2:2019Ships and marine technology - Loose flanges and welding necks extra light duty - Part2: Welding necks made of CuNi10Fe1,6Mn, DN 32 to DN 50, PN up to 25, DN 65 to DN125, PN up to 10

9,768円 (本体8,880円)

DIN 86103:2019 Sockets for screwed ends with metric fine thread and Whitworth pipe thread 13,112円 (本体11,920円)

DIN 86150:2019 Welding sockets for pipes 11,374円 (本体10,340円)

DIN EN IEC 63135:2019

Maritime navigation and radiocommunication equipment and systems - Automaticidentification systems (AIS) - SAR Airborne equipment - Operational and performancerequirements, methods of test and required test results (IEC 63135:2018); Englishversion EN IEC 63135:2019

44,506円 (本体40,460円)

DIN EN ISO 12215-8:2019

Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009,including Cor 1:2010); German version EN ISO 12215-8:2018

32,692円 (本体29,720円)


DIN EN 16603-33-11:2019

Space engineering - Explosive subsystems and devices; English version EN 16603-33-11:2019

41,954円 (本体38,140円)

DIN EN 2638:2019Aerospace series - Aluminium alloy 2024- - T3 - Extruded bar and section - 1,2 mm<= (a or D) <= 150 mm with coarse peripheral grain control; German and English versionEN 2638:2019

14,740円 (本体13,400円)

DIN EN 2812:2019Aerospace series - Stripping of electric cables; German and English version EN2812:2019

22,968円 (本体20,880円)

DIN EN 3155-014:2019Aerospace series - Electrical contacts used in elements of connection - Part 014:Contacts, electrical, male, type A, crimp, class S - Product standard; German andEnglish version EN 3155-014:2019

16,368円 (本体14,880円)

DIN EN 3475-418:2019Aerospace series - Cables, electrical, aircraft use - Test methods - Part 418: Thermalendurance for conductors; German and English version EN 3475-418:2019

13,112円 (本体11,920円)

DIN EN 3645-005:2019

Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threadedcoupling, operating temperature 175 ｰC or 200 ｰC continuous - Part 005: Receptacle,hermetic, round flange, solder mounting - Product standard; German and Englishversion EN 3645-005:2019

13,112円 (本体11,920円)

DIN EN 3660-001:2019Aerospace series - Cable outlet accessories for circular and rectangular electrical andoptical connectors - Part 001: Technical specification; German and English version EN3660-001:2019

19,756円 (本体17,960円)

DIN EN 4708-001:2019Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification -Part 001: Technical specification; German and English version EN 4708-001:2019

18,018円 (本体16,380円)

DIN EN 6059-305:2019Aerospace series - Electrical cables, installation - Protection sleeves - Test methods- Part 305: Fluid absorption; German and English version EN 6059-305:2019

11,374円 (本体10,340円)

DIN EN 6059-407:2019Aerospace series - Electrical cables, installation - Protection sleeves - Test methods- Part 407: Mark adherence and print permanence; German and English version EN6059-407:2019

16,368円 (本体14,880円)

49 航空宇宙工学





DIN EN 14492-2:2019Cranes - Power driven winches and hoists - Part 2: Power driven hoists; Germanversion EN 14492-2:2019

58,014円 (本体52,740円)

DIN EN 16796-4:2019Energy efficiency of Industrial trucks - Test methods - Part 4: Variable-reach rough-terrain trucks; German version EN 16796-4:2019

13,112円 (本体11,920円)

DIN EN 16842-4:2019Powered industrial trucks - Visibility - Test methods and verification - Part 4:Industrial variable reach trucks up to and including 10 000 kg capacity; German versionEN 16842-4:2019

16,368円 (本体14,880円)

DIN EN 16842-9:2019Powered industrial trucks - Visibility - Test methods and verification - Part 9: Order-picking, lateral- and front-stacking trucks with elevating operator position; Germanversion EN 16842-9:2019

16,368円 (本体14,880円)


DIN EN 17130:2019Textiles and textile products - Determination of dimethylfumarate (DMFu), methodusing gas chromatography; German version EN 17130:2019

16,368円 (本体14,880円)

DIN EN 17131:2019Textiles and textile products - Determination of Dimethylformamide (DMF), methodusing gas chromatography; German version EN 17131:2019

13,112円 (本体11,920円)

DIN EN 17132:2019Textiles and textile products - Determination of Polycyclic Aromatic Hydrocarbons(PAH), method using gas chromatography; German version EN 17132:2019

14,740円 (本体13,400円)

DIN EN 17134:2019Textiles and textile products - Determination of certain preservatives, method usingliquid chromatography; German version EN 17134:2019

13,112円 (本体11,920円)

DIN EN ISO 11058:2019Geotextiles and geotextile-related products - Determination of water permeabilitycharacteristics normal to the plane, without load (ISO 11058:2019); German version ENISO 11058:2019

21,318円 (本体19,380円)

DIN EN ISO 18254-2:2019

Textiles - Method for the detection and determination of alkylphenol ethoxylates(APEO) - Part 2: Method using NPLC (ISO 18254-2:2018); German version EN ISO18254-2:2019

21,318円 (本体19,380円)


DIN 18320:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Landscape works

16,368円 (本体14,880円)

DIN EN 12733:2019Agricultural and forestry machinery - Pedestrian controlled motor mowers - Safety;German version EN 12733:2018

45,760円 (本体41,600円)

DIN EN 1853:2019 Agricultural machinery - Trailers - Safety; German version EN 1853:2017+AC:2019 32,692円 (本体29,720円)

DIN EN ISO 10517:2019Powered hand-held hedge trimmers - Safety (ISO 10517:2019); German version ENISO 10517:2019

28,556円 (本体25,960円)

59 繊維及び皮革技術


65 農業


53 荷役設備





DIN EN 15585:2019Cereals and cereal products - Durum wheat (T. durum Desf.) - Determination ofpercentage of mitadine grains and calculation of percentage of vitreous grains; Germanversion EN 15585:2008

16,368円 (本体14,880円)

DIN EN ISO 34101-3:2019

Sustainable and traceable cocoa - Part 3: Requirements for traceability (ISO 34101-3:2019); German version EN ISO 34101-3:2019

26,026円 (本体23,660円)

DIN EN ISO 34101-4:2019

Sustainable and traceable cocoa - Part 4: Requirements for certification schemes (ISO34101-4:2019); German version EN ISO 34101-4:2019

27,324円 (本体24,840円)

DIN EN ISO 9167:2019Rapeseed and rapeseed meals - Determination of glucosinolates content - Methodusing high-performance liquid chromatography (ISO 9167:2019); German version ENISO 9167:2019

26,026円 (本体23,660円)


DIN EN 17127:2019Outdoor hydrogen refuelling points dispensing gaseous hydrogen and incorporatingfilling protocols; German version EN 17127:2018

19,756円 (本体17,960円)


DIN EN ISO 12156-1:2019

Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR)- Part 1: Test method (ISO 12156-1:2018); German version EN ISO 12156-1:2018

22,968円 (本体20,880円)

DIN EN ISO 15589-1:2019

Petroleum, petrochemical and natural gas industries - Cathodic protection of pipelinesystems - Part 1: On-land pipelines (ISO 15589-1:2015); German version EN ISO15589-1:2017

45,760円 (本体41,600円)

DIN EN ISO 19345-2:2019

Petroleum and natural gas industry - Pipeline transportation systems - Pipelineintegrity management specification - Part 2: Full-life cycle integrity management foroffshore pipeline (ISO 19345-2:2019); English version EN ISO 19345-2:2019, only onCD-ROM

45,760円 (本体41,600円)

DIN EN ISO 22995:2019Petroleum products - Determination of cloud point - Automated step-wise coolingmethod (ISO 22995:2019); German version EN ISO 22995:2019

14,740円 (本体13,400円)

DIN EN ISO 3015:2019Petroleum and related products from natural or synthetic sources - Determination ofcloud point (ISO 3015:2019); German version EN ISO 3015:2019

18,018円 (本体16,380円)

DIN EN ISO 3016:2019Petroleum and related products from natural or synthetic sources - Determination ofpour point (ISO 3016:2019); German version EN ISO 3016:2019

19,756円 (本体17,960円)

DIN EN ISO 3405:2019Petroleum and related products from natural or synthetic sources - Determination ofdistillation characteristics at atmospheric pressure (ISO 3405:2019); German versionEN ISO 3405:2019

31,262円 (本体28,420円)

DIN ISO 11009:2019Petroleum products and lubricants - Determination of water washout characteristics oflubricating greases (ISO 11009:2000)

13,112円 (本体11,920円)

71 化学技術


75 石油及び関連技術


67 食品技術





DIN 50142:2019 Testing of metallic materials - Flat bending fatigue test 16,368円 (本体14,880円)

DIN 50154:2019Tensile test on foils and strips of aluminum and aluminum wrought alloys with a nominalthickness less than 0,200 mm

14,740円 (本体13,400円)

DIN EN 17263:2019Copper and copper alloys - Eddy current testing on the outer surface of rods, bars,hollow rods and wires for the detection of defects by encircling test coil; Germanversion EN 17263:2019

14,740円 (本体13,400円)

DIN EN ISO 4491-4:2019Metallic powders - Determination of oxygen content by reduction methods - Part 4:Total oxygen by reduction-extraction (ISO 4491-4:2019); German version EN ISO4491-4:2019

14,740円 (本体13,400円)

DIN EN ISO 4545-1:2019Metallic materials - Knoop hardness test - Part 1: Test method (ISO 4545-1:2017);German version EN ISO 4545-1:2018

26,026円 (本体23,660円)


DIN 18361:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Glazing works

9,768円 (本体8,880円)


DIN EN 12012-4:2019Plastics and rubber machines - Size reduction machines - Part 4: Safety requirementsfor agglomerators; German version EN 12012-4:2019

21,318円 (本体19,380円)

DIN EN 17224:2019Determination of compressive shear strength of wood adhesives at elevatedtemperatures; German version EN 17224:2019

16,368円 (本体14,880円)

DIN EN 17271:2019Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peelstrength of profiles laminated with foils; German version EN 17271:2019

18,018円 (本体16,380円)

DIN EN 549:2019Rubber materials for seals and diaphragms for gas appliances and gas equipment;German version EN 549:2019

24,640円 (本体22,400円)

DIN EN ISO 1110:2019Plastics - Polyamides - Accelerated conditioning of test specimens (ISO 1110:2019);German version EN ISO 1110:2019

11,374円 (本体10,340円)

DIN EN ISO 1183-1:2019Plastics - Methods for determining the density of non-cellular plastics - Part 1:Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019,Corrected version 2019-05); German version EN ISO 1183-1:2019

18,018円 (本体16,380円)

DIN EN ISO 15512:2019Plastics - Determination of water content (ISO 15512:2019); German version EN ISO15512:2019

28,556円 (本体25,960円)

DIN EN ISO 16014-5:2019

Plastics - Determination of average molecular weight and molecular weight distributionof polymers using size-exclusion chromatography - Part 5: Light-scattering method(ISO 16014-5:2019); German version EN ISO 16014-5:2019

22,968円 (本体20,880円)

83 ゴム及びプラスチック工業


77 金属工学


81 ガラス及びセラミック工業




DIN EN ISO 17556:2019Plastics - Determination of the ultimate aerobic biodegradability of plastic materials insoil by measuring the oxygen demand in a respirometer or the amount of carbondioxide evolved (ISO 17556:2019); German version EN ISO 17556:2019

26,026円 (本体23,660円)

DIN EN ISO 21302-1:2019

Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 1: Designationsystem and basis for specifications (ISO 21302-1:2019); German version EN ISO21302-1:2019

18,018円 (本体16,380円)

DIN EN ISO 21302-2:2019

Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparationof test specimens and determination of properties (ISO 21302-2:2019); German versionEN ISO 21302-2:2019

18,018円 (本体16,380円)

DIN EN ISO 29862:2019Self adhesive tapes - Determination of peel adhesion properties (ISO 29862:2018);German version EN ISO 29862:2019

19,756円 (本体17,960円)

DIN EN ISO 29863:2019Self adhesive tapes - Measurement of static shear adhesion (ISO 29863:2018); Germanversion EN ISO 29863:2019

19,756円 (本体17,960円)

DIN EN ISO 29864:2019Self adhesive tapes - Measurement of breaking strength and elongation at break (ISO29864:2018); German version EN ISO 29864:2019

14,740円 (本体13,400円)

DIN EN ISO 305:2019Plastics - Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds - Discoloration method(ISO 305:2019); German version EN ISO 305:2019

13,112円 (本体11,920円)

DIN EN ISO 3251:2019Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO3251:2019); German version EN ISO 3251:2019

18,018円 (本体16,380円)

DIN EN ISO 6721-1:2019Plastics - Determination of dynamic mechanical properties - Part 1: General principles(ISO 6721-1:2019); German version EN ISO 6721-1:2019

24,640円 (本体22,400円)

DIN EN ISO 6721-2:2019Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulummethod (ISO 6721-2:2019); German version EN ISO 6721-2:2019

18,018円 (本体16,380円)


DIN EN ISO 12625-1:2019

Tissue paper and tissue products - Part 1: Vocabulary (ISO 12625-1:2019); Germanversion EN ISO 12625-1:2019

22,968円 (本体20,880円)

DIN EN ISO 12625-11:2019

Tissue paper and tissue products - Part 11: Determination of wet ball burst strength(ISO 12625-11:2019); German version EN ISO 12625-11:2019

18,018円 (本体16,380円)


DIN EN ISO 18451-1:2019

Pigments, dyestuffs and extenders - Terminology - Part 1: General terms (ISO 18451-1:2019); German and English version EN ISO 18451-1:2019

26,026円 (本体23,660円)

DIN EN ISO 3251:2019Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO3251:2019); German version EN ISO 3251:2019

18,018円 (本体16,380円)

DIN EN ISO 6504-1:2019Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munk methodfor white and light-coloured paints (ISO 6504-1:2019); German version EN ISO 6504-1:2019

28,556円 (本体25,960円)

85 紙・パルプ工業


87 塗料及び色材工業





DIN 18299:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - General rules applying to all types ofconstruction work

9,768円 (本体8,880円)

DIN 18300:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Earthworks

11,374円 (本体10,340円)

DIN 18301:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Drilling works

11,374円 (本体10,340円)

DIN 18302:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Borehole sinking operations

9,768円 (本体8,880円)

DIN 18304:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Piling

9,768円 (本体8,880円)

DIN 18305:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Groundwater lowering

8,030円 (本体7,300円)

DIN 18308:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Land drainage and infiltrationmanagement works

8,030円 (本体7,300円)

DIN 18309:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Ground treatment by grouting

8,030円 (本体7,300円)

DIN 18311:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Dredging work

9,768円 (本体8,880円)

DIN 18312:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Underground construction work

13,112円 (本体11,920円)

DIN 18313:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Diaphragm walling

11,374円 (本体10,340円)

DIN 18315:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Road construction - Surfacingswithout binder

8,030円 (本体7,300円)

DIN 18316:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Road construction - Surfacings withhydraulic binders

13,112円 (本体11,920円)

DIN 18317:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Road construction - Asphaltsurfacings

9,768円 (本体8,880円)

DIN 18318:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Sett and slab pavements, andsurrounds

14,740円 (本体13,400円)

DIN 18319:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Trenchless pipelaying

11,374円 (本体10,340円)

91 建設材料及び建築物




DIN 18320:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Landscape works

16,368円 (本体14,880円)

DIN 18321:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Jet grouting work

8,030円 (本体7,300円)

DIN 18322:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Underground cable laying work

11,374円 (本体10,340円)

DIN 18324:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Horizontal directional drilling works

11,374円 (本体10,340円)

DIN 18325:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Track works

8,030円 (本体7,300円)

DIN 18326:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Renovation works on drainagechannels

9,768円 (本体8,880円)

DIN 18329:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Management of road safety measuresat road works

9,768円 (本体8,880円)

DIN 18330:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Masonry work

11,374円 (本体10,340円)

DIN 18331:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Concrete works

13,112円 (本体11,920円)

DIN 18332:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Natural stone work

13,112円 (本体11,920円)

DIN 18333:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Cast stone works

9,768円 (本体8,880円)

DIN 18336:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Waterproofing

18,018円 (本体16,380円)

DIN 18338:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Roofing works

13,112円 (本体11,920円)

DIN 18339:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Sheet metal roofing and wall coveringwork

16,368円 (本体14,880円)

DIN 18340:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Dry lining and partitioning work

14,740円 (本体13,400円)

DIN 18345:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Thermal insulation composite systems

9,768円 (本体8,880円)

DIN 18349:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Repair work on concrete structures

11,374円 (本体10,340円)

DIN 18350:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Plastering and rendering

11,374円 (本体10,340円)



DIN 18351:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Work on back-ventilated curtainwalling

11,374円 (本体10,340円)

DIN 18352:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Wall and floor tiling works

11,374円 (本体10,340円)

DIN 18353:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Laying of floor screed

9,768円 (本体8,880円)

DIN 18354:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Mastic asphalt works

8,030円 (本体7,300円)

DIN 18355:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Joinery

13,112円 (本体11,920円)

DIN 18356:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Laying of parquet flooring and woodblock flooring

9,768円 (本体8,880円)

DIN 18357:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Mounting of door and windowhardware

9,768円 (本体8,880円)

DIN 18358:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Rolling shutters works

8,030円 (本体7,300円)

DIN 18360:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Metal construction works

13,112円 (本体11,920円)

DIN 18363:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Painting and coating work - Coatings

13,112円 (本体11,920円)

DIN 18364:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Corrosion protection of steelstructures

9,768円 (本体8,880円)

DIN 18365:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Flooring works

9,768円 (本体8,880円)

DIN 18366:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Application of decorative coverings onwalls and ceilings

11,374円 (本体10,340円)

DIN 18379:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Installation of air conditioning systems

16,368円 (本体14,880円)

DIN 18380:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Installation of central heating systemsand hot water supply systems

13,112円 (本体11,920円)

DIN 18381:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Installation of gas, water and drainagepipework inside buildings

13,112円 (本体11,920円)

DIN 18382:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Electrical installations, safety systemsand information technology systems

11,374円 (本体10,340円)



DIN 18384:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Installation of lightning protection,surge protection and earthing systems

11,374円 (本体10,340円)

DIN 18386:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Building automation and controlsystems

9,768円 (本体8,880円)

DIN 18535-2/A1:2019Waterproofing of tanks and pools - Part 2: Waterproofing with waterproofing materialsin sheet form; Amendment 1

5,654円 (本体5,140円)

DIN 1960:2019German construction contract procedures (VOB) - Part A: General provisions relatingto the award of construction contracts

39,204円 (本体35,640円)

DIN 19639:2019 Soil protection during planning and execution of construction projects 31,262円 (本体28,420円)

DIN EN 12350-1:2019Testing fresh concrete - Part 1: Sampling and common apparatus; German version EN12350-1:2019

13,112円 (本体11,920円)

DIN EN 12350-2:2019 Testing fresh concrete - Part 2: Slump test; German version EN 12350-2:2019 13,112円 (本体11,920円)

DIN EN 12350-3:2019 Testing fresh concrete - Part 3: Vebe test; German version EN 12350-3:2019 13,112円 (本体11,920円)

DIN EN 12350-4:2019Testing fresh concrete - Part 4: Degree of compactability; German version EN 12350-4:2019

13,112円 (本体11,920円)

DIN EN 12350-5:2019 Testing fresh concrete - Part 5: Flow table test; German version EN 12350-5:2019 13,112円 (本体11,920円)

DIN EN 12350-6:2019 Testing fresh concrete - Part 6: Density; German version EN 12350-6:2019 14,740円 (本体13,400円)

DIN EN 12350-7:2019Testing fresh concrete - Part 7: Air content - Pressure methods; German version EN12350-7:2019

21,318円 (本体19,380円)

DIN EN 12350-8:2019Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test; Germanversion EN 12350-8:2019

13,112円 (本体11,920円)

DIN EN 12504-1:2019Testing concrete in structures - Part 1: Cored specimens - Taking, examining andtesting in compression; German version EN 12504-1:2019

14,740円 (本体13,400円)

DIN EN 13358:2019Bitumen and bituminous binders - Determination of the distillation characteristics ofcut-back and fluxed bituminous binders made with mineral fluxes; German version EN13358:2019

18,018円 (本体16,380円)

DIN EN 13381-7:2019Test methods for determining the contribution to the fire resistance of structuralmembers - Part 7: Applied protection to timber members; German version EN 13381-7:2019

43,252円 (本体39,320円)

DIN EN 13384-1:2019Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys servingone heating combustion; German version EN 13384-1:2015+A1:2019

45,760円 (本体41,600円)

DIN EN 13384-2:2019Chimneys - Thermal and fluid dynamic calculation methods - Part 2: Chimneys servingmore than one combustion appliance; German version EN 13384-2:2015+A1:2019

40,612円 (本体36,920円)



DIN EN 1366-13:2019Fire resistance tests for service installations - Part 13: Chimneys; German version EN1366-13:2019

21,318円 (本体19,380円)

DIN EN 15269-11:2019

Extended application of test results for fire resistance and/or smoke control for door,shutter and openable window assemblies, including their elements of building hardware- Part 11: Fire resistance for operable fabric curtains; German version EN 15269-11:2018+AC:2019

44,506円 (本体40,460円)

DIN EN 16798-17:2019Energy performance of buildings - Ventilation for buildings - Part 17: Guidelines forinspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11,M7-11); German version EN 16798-17:2017

27,324円 (本体24,840円)

DIN EN 1849-2:2019Flexible sheets for waterproofing - Determination of thickness and mass per unit area- Part 2: Plastics and rubber sheets for roof waterproofing; German version EN 1849-2:2019

14,740円 (本体13,400円)

DIN EN 1991-1-7/NA:2019

National Annex - Nationally determined parameters - Eurocode 1: Actions onstructures - Part 1-7: General actions - Accidental actions

24,640円 (本体22,400円)

DIN EN 50107-3*VDE0128-3:2019

Product standard covering luminous signs with discharge lamps and/or LED (lightemitting diodes) and/or EL (electroluminescent) lightsources with a nominal voltage notexceeding 1 000 V, with the exclusion of general lighting, traffic- or emergency relatedpurpose; German version EN 50107-3:2018 + AC:2018

17,501円 (本体15,910円)

DIN EN ISO 21083-1:2019

Test method to measure the efficiency of air filtration media against sphericalnanomaterials - Part 1: Size range from 20 nm to 500 nm (ISO 21083-1:2018); Germanversion EN ISO 21083-1:2018

35,178円 (本体31,980円)


DIN 18300:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Earthworks

11,374円 (本体10,340円)

DIN 18301:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Drilling works

11,374円 (本体10,340円)

DIN 18302:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Borehole sinking operations

9,768円 (本体8,880円)

DIN 18304:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Piling

9,768円 (本体8,880円)

DIN 18305:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Groundwater lowering

8,030円 (本体7,300円)

DIN 18308:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Land drainage and infiltrationmanagement works

8,030円 (本体7,300円)

DIN 18309:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Ground treatment by grouting

8,030円 (本体7,300円)

DIN 18311:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Dredging work

9,768円 (本体8,880円)

DIN 18312:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Underground construction work

13,112円 (本体11,920円)

93 土木工学




DIN 18313:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Diaphragm walling

11,374円 (本体10,340円)

DIN 18315:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Road construction - Surfacingswithout binder

8,030円 (本体7,300円)

DIN 18316:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Road construction - Surfacings withhydraulic binders

13,112円 (本体11,920円)

DIN 18317:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Road construction - Asphaltsurfacings

9,768円 (本体8,880円)

DIN 18318:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Sett and slab pavements, andsurrounds

14,740円 (本体13,400円)

DIN 18319:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Trenchless pipelaying

11,374円 (本体10,340円)

DIN 18321:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Jet grouting work

8,030円 (本体7,300円)

DIN 18322:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Underground cable laying work

11,374円 (本体10,340円)

DIN 18324:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Horizontal directional drilling works

11,374円 (本体10,340円)

DIN 18325:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Track works

8,030円 (本体7,300円)

DIN 18326:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Renovation works on drainagechannels

9,768円 (本体8,880円)

DIN 18329:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Management of road safety measuresat road works

9,768円 (本体8,880円)

DIN 18354:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Mastic asphalt works

8,030円 (本体7,300円)

DIN EN 14504:2019Inland navigation vessels - Floating landing stages and floating bridges on inland waters- Requirements, tests; German version EN 14504:2019

24,640円 (本体22,400円)


DIN 15765:2019Entertainment Technology - Multi-core cable systems for mobile productions andentertainment technology

18,018円 (本体16,380円)

DIN 15782:2019 Media and sound technology - Structured media cabling systems 21,318円 (本体19,380円)

97 家庭用及び商業用装置．娯楽．スポーツ




DIN 18355:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Joinery

13,112円 (本体11,920円)

DIN 18356:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Laying of parquet flooring and woodblock flooring

9,768円 (本体8,880円)

DIN 18386:2019German construction contract procedures (VOB) - Part C: General technicalspecifications in construction contracts (ATV) - Building automation and controlsystems

9,768円 (本体8,880円)

DIN EN 14960-1:2019Inflatable play equipment - Part 1: Safety requirements and test methods; Germanversion EN 14960-1:2019

31,262円 (本体28,420円)

DIN EN 16838:2019Refrigerated display scooping cabinets and pozzetto for gelato - Classification,requirements, performance and energy consumption testing; German version EN16838:2019

32,692円 (本体29,720円)

DIN EN 61770*VDE0700-600:2019

Electric appliances connected to the water mains - Avoidance of backsiphonage andfailure of hose-sets (IEC 61770:2008); German version EN 61770:2009 + A11:2018

24,178円 (本体21,980円)

DIN EN ISO 10833:2019Textile floor coverings - Determination of resistance to damage at cut edges using themodified Vettermann drum test (ISO 10833:2017); German version EN ISO 10833:2019

14,740円 (本体13,400円)

DIN EN ISO 16581:2019Resilient and laminate floor coverings - Determination of the effect of simulatedmovement of a furniture leg (ISO 16581:2014); German version EN ISO 16581:2019

13,112円 (本体11,920円)


注文書年月日

【お申込み先】ご記入の上、ＦＡＸにてお申込みください。

※有料会員の方は、JSA Webdesk（https://webdesk.jsa.or.jp/）からお申込みください。

日本規格協会グループ販売ｻｰﾋﾞｽﾁｰﾑ FAX ：03-4231-8665 /TEL：03-4231-8550

（ふりがな）【貴社名】

【ご住所】（〒－）都・道府・県

【ご担当部署名】

【TEL】（日中連絡の取れる番号）

（ふりがな）【ご担当者名】

【FAX】

お支払い方法

請求書を商品に同封・振込

（振込手数料はお客様ご負担にてお願いいたします。）

お支払い期限

請求書記載の日付から 60日以内に

お振込みください。

JSA-ID（不明の場合は空欄で結構です）

言語※1 規格番号若しくは書籍タイトル（ISBNコード）年号※2 部数金額

【通信欄】

(2019-09)

※1 言語の欄にご指定がない場合は原則として原文（ＪＩＳは和文、海外規格は英語等）を納品いたします。

※2 旧版、廃止規格をご希望の場合はその旨ご記入下さい。（ご指定のない場合は原則として最新版を納品いたします。）

※3 商品の返品・交換は、乱丁、落丁がある場合を除き、原則お受けできませんので予めご了承下さい。

※4 送付手数料は、ご注文の部数にかかわらず、１回のご注文につき一律463円(税抜)申受けます。

ただし、ご予約対象商品につきましては、発送毎に送料を申受けます。

(送付手数料は変更になる場合がございます。時間指定、航空便等の特別なご指定がある場合は、実費の送付手数料をご請求いたします。)

※5 PDF版のご購入は、JSA Webdesk (https://webdesk.jsa.or.jp)をご利用下さい。（PDF版のお取扱いがない商品もございます。）

※6 ご記入いただいた個人情報に基づき、日本規格協会グループから各種ご案内を送付させていただく場合がございます。詳細は個人情報

保護方針（https://www.jsa.or.jp/other/privacy/）をご覧ください。

※7 規格類は価格が変更される場合がございます。

https://webdesk.jsa.or.jp/

https://www.jsa.or.jp/other/privacy/

Documents

DIN規格 --- 2019-09月 新刊情報 · 2019. 9. 26. · DIN EN IEC 62474*VDE 0042-4:2019 Material declaration for products of and for the electrotechnical industry (IEC 62474:2018);

DIN規格 --- 2019-09月新刊情報 · 2019. 9. 26. · DIN EN IEC 62474*VDE 0042-4:2019 Material declaration for products of and for the electrotechnical industry (IEC 62474:2018);