Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
DirectForce Pro WheelInstallation Manual
Parts List
VirtualRacingSchool.com
MiGE Motor130ST-AM10010-DFP
Mounting BracketDFP-MB01
Hub AdapterDFP-MH01
Button PlateDFP-WP01
Remote StopDFP-MS01
Steering Wheel RimDFP-W01
DirectForce Pro Wheel ControllerDFP-C01
Note: Images are not to scale.
Wheel Base Steering Wheel
Other Accessories
DirectForce Pro Wheel
Solution OverviewMiGE Motor
VRS Steering Wheel Rim(Optional)
Mounting Hex Screws
Hub Adapter(Optional)
VRS Button Plate(Optional)
Mounting Bracket(Optional)
Remote Stop(Optional)
VRS Wheel Controller
VirtualRacingSchool.com
DirectForce Pro Wheel
1
4
2
5
3
6
Attach the left and right side mounts to the Motor Mount with the provided (4) M8 Short Cap Screws, (4) M8 Lock Nuts, and (8) 8mm Washers.
Attach the mounting bracket to the Motor using (4) M8 Long Cap Screws, (4) M8 Lock Nuts, and (8) 8mm Washers.
Make sure the assembly is firmly tightened.
Make sure the assembly is firmly tightened. Mount the Motor to your desk/rig.Plug the two motor cables into the motor and into the back of the Controller. Also, plug in the Remote Stop (if available).
VirtualRacingSchool.com
Installation DirectForce Pro Wheel
7
10
8
11
9
12
Connect the controller to your PC via the provided USB cable.
Download the software onto your computer:https://virtualracingschool.com/downloads/DFP
Flip the power switch on the controller to the ON position.
Install and launch the configuration tool. Center the wheel and save settings. Start with a low “Max Force” and work your way up until you’re comfortable.
For more information, please visit VirtualRacingSchool.com/DFP
With the power switch in the OFF position, plug the power cable into the back of the controller.
VirtualRacingSchool.com
Installation DirectForce Pro Wheel