Upload
vuduong
View
219
Download
0
Embed Size (px)
Citation preview
i
DIRECTORY OF CONSULTANCIES
2013 EDITION
Care has been taken to provide accurate and current information. Further information can be obtained from the consultants and companies involved. Neither the author, the Marine Corrosion Forum, nor anyone else associated with this publication, shall be liable for any loss, damage or liability directly or indirectly caused, or alleged to be caused, by this document.
ii
Further Information
The following have pdf files of further information which can be downloaded from the ‘Consultancies’ page of www.marinecorrosionforum.org.
• COPPER DEVELOPMENT ASSOCIATION
• ECHA MICROBIOLOGY LTD
• LLOYD’S REGISTER EMEA
• MACAW ENGINEERING LTD
• TWI
iii
CONTENTS
Contents iii Preface iv Questionnaire v Consultancies 1
COMMTECH ASSOCIATES 2 COPPER DEVELOPMENT ASSOCIATION 3 CORROSION CONTROL 6 CP CONSULTANCY LIMITED 7 ECHA MICROBIOLOGY LTD 8 LLOYD’S REGISTER EMEA 11 MACAW ENGINEERING LTD 13 NICKEL INSTITUTE 15 RFMATERIALS 16 TWI 17
iv
PREFACE
This document provides a brief summary of the experience and areas of expertise of Consultancies which are, or form part of, Member Companies. In particular, it lists expertise relating to corrosion in marine or wet environments. A questionnaire/template was sent to each company, and the directory has been compiled from returned questionnaires, using the information supplied by the companies. More details can be obtained by contacting the consultancies directly.
v
QUESTIONNAIRE - MCF Consultancy List
Name of Consultancy
Contact Name Address
Tel/fax E-mail Website
No of Professional Staff
Areas of Expertise (i.e. core business expertise)
Staff Qualifications & Experience (if there are several professional staff then you may prefer to list these individually, on a separate sheet(s)
Associations (e.g. with other consultancies or laboratories)
International Experience (i.e. list of countries)
Additional Information
1
CONSULTANCIES
2
Name of Consultancy
Commtech Associates Ltd
Contact Name Address
Tel/fax E-mail Website
Charles Barraclough 149 Melrose Avenue Wimbledon Park London 0208 947 7567 / 0208 944 9036 [email protected] http://home.btconnect.com/ctassociates
No of Professional Staff
1
Areas of Expertise Metallurgy, Welding, Corrosion, Business
Staff Qualifications & Experience
EurIng, MBA, BSc, FIMMM, SenMWeldI, MICorrr
Associations Intetech Ltd Deepwater Corrosion Services (UK) Ltd AntiCorrosion Engineering Ltd Rustbusters Corrosion Control Ltd
International Experience Algeria, Azerbaijan, France, Germany, Holland, Iraq, Italy, Korea, Libya, Russia, Spain, Thailand, USA
Additional Information
CP and coating is subcontracted to second group of associates above
3
Name of Consultancy
Copper Development Association
Contact Name Address
Tel/fax E-mail Website
Peter Webster/Carol Powell/Mark Tur 5 Grovelands Business Centre Boundary Way Hemel Hempstead HP2 7TE Tel: 01442 275705/Fax: 01442 275716 [email protected]/enquiry-form.shtml
No of Professional Staff
6
Areas of Expertise Peter WebsterMetallurgist/Technical Consultant – CDA Information Service Carol PowellMetallurgist - Co-ordinator of Marine project Copper-nickel and Nickel-copper alloys Mark TurMetallurgist/Engineer/Technical Consultant - CDA Information Service
Staff Qualifications & Experience
Peter WebsterBSc Metallurgy Birmingham University MSc Ceramics Sheffield University C Eng MIM 1969-1997 Lecturer in Materials University of Hertfordshire 1969-1997 Part Time Lecturer Open University 1990-95 Lectured Sheffield University MSc Materials Course 1996-98 Carol PowellConsultant Metallurgist CEng, MIM3, MIMarEST Carol began her career as a technical investigator in the corrosion laboratories of INCO Alloys Ltd, Hereford, later becoming technical marketing engineer with responsibilities for nickel alloys used in marine, petrochemical and chemical industries.
4
In 1983, she joined YARD Ltd; a firm of marine consulting engineers as their specialist in nickel alloys and stainless steels primarily working with the MoD (Navy). Since 1989, she has been a CDA consultant; her main specialisation for copper alloys covers the marine industry, particularly involving copper nickels. Vice-Chair of EFC Marine Working Party.
Mark TurMark has an MBA from Oxford Brookes University and is a member of the following professional bodies: The Institute of Materials, Minerals & Mining The Chartered Institute of Marketing The Engineering Council UK Mark has been involved in CDA’s antimicrobial programme for most of its 5 years and has spearheaded it over the last two years, overseeing the manufacture and installation of products for the UK clinical trial. He will present a manufacturers’ view of the requirements for products and opportunities for product development.
Associations
International Experience
CDA is located in the UK but is part of a network of 28 Copper Centres worldwide. CDA is on the steering committee of the Copper Nickel Task Group, a global body of industry specialists in the use of copper alloys for marine applications.
Additional Information
Established in 1933, Copper Development Association (CDA) is a membership-based organisation which supports and promotes the use of copper and its family of alloys by providing accurate, reliable, impartial, information to professionals – specifiers, designers, manufacturers, architects, engineers, installers – to end users and to the specifiers and designers of tomorrow, students, to ensure the ongoing correct and efficient use of copper. Whilst we do not provide consultancy services, we are able to provide free technical information to help solve your problems via an online enquiry system– visit
5
www.copperinfo.co.uk/enquiry-form.shtml.
By contacting Copper Development Association you are agreeing for your details to be held on the CDA database and that you may be contacted from time to time, by email, telephone or mail, with details of news and events from CDA and its project partners.
6
Name of Consultancy
Corrosion Control and Corrosion Control Affiliates Ltd
Contact Name Address
Tel/fax E-mail Website
Brian S Wyatt 3 Ivy Court Acton Trussell Staffordshire ST17 0SN, UK + 44 (0) 1785 711560 / +44 (0) 1785 711561 brianwyatt@controlcorrosion.co.ukwww.controlcorrosion.co.ukMobile 07836 247893
No of Professional Staff
1 No. Specialist Teams are utilised for larger projects within CCAL.
Areas of Expertise Cathodic Protection: Steel in waters, concrete and soils. Full design services and independent assessments. Corrosion Assessments & Surveys Accelerated Low Water Corrosion
Staff Qualifications & Experience
Eur Ing, BSc, CEng, MIM, FICorr, FIHT, FCS 30 + years professional experience in corrosion engineering / cathodic protection, primarily in consulting but also as manufacturer and contractor. NACE Certificated Corrosion Specialist. Past President Institute of Corrosion.
Associations Extensive work in select teams formed specifically to suit project needs. Includes other MCF members. CORROSION CONTROL AFFILIATES Ltd formed specifically for such larger projects.
International Experience
Extensive work experience in Scandinavia, Middle East and North Africa. Some experience in East Africa and South Africa, Namibia and Zimbabwe along with New Zealand, Australia and South America.
Additional Information
Expert Witness work. Independent Reviews/Investigations for Mediation.
7
Name of Consultancy
The CP Consultancy Limited
Contact Name Address
Tel/fax E-mail
Dr W R Jacob Tatton House, 3 Manor Farm Little Wenlock Shropshire, TF6 5BZ, UK +44 [0] 1952 507663 [email protected]
No of Professional Staff
One
Areas of Expertise
Cathodic protection Materials selection Corrosion training
Staff Qualifications & Experience
Robin Jacob - MA, PhD [Cantab], FICorr NACE Corrosion Specialist
Associations
None
International Experience
Algeria France New Zealand Argentina Germany Norway Australia Italy Sweden Canada Jordan United Arab Emirates Denmark Libya USA
Additional Information
40+ years experience in corrosion control. Project experience list available on request
8
Name of Consultancy
ECHA Microbiology Ltd
Contact Name Address
Tel/fax
Website
Dr Gareth Williams & Mr Graham Hill Units 22 & 23 Willowbank Technology Park, Llandogo Road, St Mellons, Cardiff CF3 0EF, UK
TEL: +44 (0) 29 2036 5930 FAX: +44 (0) 29 2036 1195
[email protected] [email protected] http://www.echamicrobiology.co.uk
No of Professional Staff
7
Areas of Expertise Microbial spoilage and corrosion in marine, petroleum and aviation industries.
Staff Qualifications & Experience
Graham Hill, Managing Director/Consultant:
Graham graduated from Southampton University in 1983 with a joint honours degree in Biology and Oceanography and then spent a brief period employed by the Microbiology Department at the University of Wales, Cardiff, before helping to establish ECHA Microbiology later that year. He has 30 years of practical experience of world wide investigation of microbial spoilage and corrosion, particularly in the petroleum, aviation and marine industries. He is author or co-author of over 40 technical papers and book chapters, primarily on petroleum microbiology and microbially influenced corrosion and has made many technical presentations on these subjects world-wide. These include a key chapter on sampling and monitoring of fuels in the ASTM Manual 47 on Fuel System Microbiology published in 2003. Graham was the Chairman of the International Association for Stability, Handling & Use of Liquid Fuels (IASH) from 2008 -2009 and also chaired the Energy Institute (previously Institute
9
of Petroleum), Microbiology Committee from the mid 90's until 2011. He retains an active involvement in that committee and also IATA's Technical Fuels Group and maintains an active role in the IATA task force developing best practice for preventing microbiological contamination in aircraft fuel tanks. He is a voting member and active on ASTM Committees D02 (Petroleum Products and Lubricants), E34 (Occupational Health & Safety) and E35 (Pesticides Anti-microbials and Alternative Control Agents). Graham was previously director of ECHA’s Testing and Consultancy Service and since 2012 is ECHA's Managing Director.
Gareth Williams, Microbiologist:
Gareth graduated from Cardiff University in 2002 with a First Class Honours degree in Microbiology including an industrial placement year at Whitman Laboratories Ltd., Estée Lauder Companies Inc. as a Quality Assurance Microbiologist. This was followed by a PhD in 2006, also at Cardiff University, investigating the use of antimicrobial agents to control catheter-associated Proteus mirabilis infection. From 2006 to 2010, Gareth was a post-doctoral researcher at the Welsh School of Pharmacy, Cardiff University. His research included investigation of the susceptibility of Staphylococcus aureus (MSSA/MRSA) to disinfectants used in Intensive Therapy Units and also an extensive project examining the viability of spore-forming bacteria on surfaces and optimising the efficacy of biocide treatments. Gareth published 14 papers over this period. He was also a part-time lecturer at the School of Health and Life Sciences, UWIC.
Gareth joined ECHA in February 2010 and is now applying his extensive microbiological experience providing consultancy for ECHA’s customers in the petroleum, aviation, marine and engineering industries. He also undertakes and supervises research projects, both for customers and as part of ECHA’s internal product research and development programme.
Please see our website for other staff bios.
Associations
N/A
10
International Experience
Europe, USA, China, Singapore, Saudi Arabia, UAE
Additional Information
Technical Consultancy, Laboratory Researchand Analysis, Training Courses, Microbiological Test Kits.
11
Name of Consultancy
Lloyd’s Register EMEA
Contact Name Address
Tel/fax E-mail Website
Dr Clive Tuck Lloyd’s Register EMEA 71, Fenchurch Street London EC3M 4BS 0207 709 9166 [email protected] www.lr.org
No of Professional Staff
16
Areas of Expertise
Marine materials – metallic and non-metallic, including composites Corrosion prevention Coatings Fracture mechanics and fatigue testing Welding technology Engineering critical assessment Failure investigation Non-destructive Test Methods
Staff Qualifications & Experience
PhD and Degree Level Metallurgy & Materials Fellows of the Institute of Materials, Minerals & Mining and Institute of Corrosion Experience in advising on materials selection, coating specification and corrosion prevention methodology. Fracture mechanics and fatigue expertise for engineering critical assessment, fitness for purpose and remnant life appraisal. Experience in successfully identifying causes of failure.
Associations
Lloyd’s Register Test Laboratory, Croydon Facilities for mechanical testing, composite testing, metallography, scanning electron microscopy/ microanalysis and spectrographic chemical analysis
International Experience
Worldwide client list
12
Additional Information
Mechanical engineering consultancy services are also available for investigations including hydrodynamics, vibration analysis, noise analysis and process measurements.
13
Name of Consultancy
MACAW Engineering Ltd
Contact Name: Address:
Tel/fax: e-mail: Web site:
Dr Patrick Stokes Q5, Quorum Business Park, Benton Lane Newcastle Upon Tyne, NE12 8BS +44 191 215 4010 [email protected]
No of Professional Staff
>60
Areas of expertise: MACAW is a focused supplier of integrity, corrosion management and related consultancy services to its customers in the oil and gas and infrastructure markets. MACAW provides engineering and technical solutions associated with the management, operation, performance, integrity and life extension of plant and pipeline systems worldwide. Our capabilities include:
Pipeline & Plant Integrity Management
Materials & Welding Consultancy
Corrosion Control & management Studies
ILI Data review and Diagnosis
Risk Assessments (CRA, PRA)
Planning & Prioritising Inspection, Maintenance & Repair (IMR)
Fitness For Service Assessment (FFS)
Site Surveys & Audits
Failure Investigations
Experimental Engineering
Safety Cases, Regulatory Issues & Standards
Staff Qualifications & Experience
MACAW has 60 graduates of which 31 have postgraduate qualifications. Staff range from graduate to internationally established experts in their respective fields. Key technical points of contact are: John Healy – Plant & Terminal Integrity Andrew Wilde – Pipeline Integrity
14
John Wilkinson – Corrosion Management Peter Boothby – Materials & Welding Paul Casson – Engineering Services Dave Smart- Onshore Gas Networks Pat Stokes – Technical Sales Manager
Associations:
Member of the Pipeline Pigging & Services Association (PPSA)
International experience
MACAW have provided services to major oil & gas operators in over 40 countries in Europe, Asia, North America, South America, Middle East and Australia.
Additional Information
15
Name of Consultancy
NICKEL INSTITUTE
Contact Name Address
Tel/fax E-mail Website
Peter Cutler The Nickel Institute The Holloway, Alvechurch Birmingham UK B48 7QA +44 (0)1527 584777 fax 585562 [email protected]
No of Professional Staff
At this location, two
Areas of Expertise Technical advice for anyone concerned with nickel and its alloys (i.e. from designers, architects, students, engineers, platers etc)
Staff Qualifications & Experience
Within our worldwide consultancy network, most are metallurgists or chemical corrosion experts, or welding experts, foundry experts or structural experts.
Associations We are associated with many organisations worldwide, such as the Stainless Steel Development Associations in UK, Europe, S.Africa, Australasia, N.America, New Zealand, India, China and Japan. We also work closely with organisations like ourselves (non-profit) for furtherance of market development and support.
International Experience We are a worldwide organisation with a total of some 5 offices, each of which is able to call on expertise from an international network of experts in every field of use which concerns nickel and/or its alloys in every form. This expertise is passed to enquirers completely free of charge.
Additional Information
We have been in existence since 1984 when we consisted of just the Toronto office and the Birmingham one. We now have 5 offices worldwide and around 80 consultants. We offer free technical advice in the form of verbal, electronic or printed matter. Our magazine is subscription free to whoever requests it, in email or printed format.
16
Name of Consultancy
RFMATERIALS
Contact Name Address
Tel/fax E-mail Website
Roger Francis 1 The Lodge Hadfield Glossop Derbyshire SK13 1QN 0790 885 6892 [email protected]
No of Professional Staff
1
Areas of Expertise Marine Corrosion (and desalination) Corrosion in oil and gas Stainless steels Copper alloys Teaching (see website)
Staff Qualifications & Experience
PhD, MSc, BSc, CEng, FNACE, FIM, MIMMM Over 35 years as a corrosion engineer working on a wide range of alloys and environments to understand and solve industrial corrosion problems. Served in numerous positions (Director, STG chair etc) in both NACE and EFC. Published three books on corrosion and contributed chapters to others. See website for full CV.
Associations
n/a
International Experience
Investigated problems in Dubai, Saudi Arabia, Australia, North Africa, USA and Europe.
Additional Information
I have been principally involved in investigating service failures or advising on materials selection for corrosive applications.
17
Name of Consultancy
TWI Ltd
Contact Name Address
Tel/fax E-mail Website
Stuart Bond TWI Ltd, Granta Park, Great Abington Cambridge. CB21 6AL T: + 44 1223 899000 / F: + 44 1223 892588 [email protected] www.twi.co.uk/corrosion
No of Professional Staff
>250
Areas of Expertise
TWI's mission is to deliver world-class service in joining materials, engineering and allied technologies to meet the needs of a global membership and its associated community. Structural integrity Design Materials selection Manufacturing Commissioning and operation End of life/life extension Non-destructive testing Manufacturing support and technology transfer Training in welding and inspection Surface engineering and coatings Research Consultancy and litigation Failure Investigation Remediation
Staff Qualifications & Experience
Range from graduate to internationally renowned experts in their field. Principal points of contact for corrosion-related issues: • Stuart Bond, MI Corr, NACE Snr Corrosion
Technologist • Paul Woollin - 13Cr/Duplex stainless steel,
MWeldI, MIMMM • Mike Gittos - Non-ferrous alloys MIM, Sen
MWeldI, Eur Ing • Briony Holmes - stainless steel, GradWeldI,
ProfGradMIMMM • Chi-Ming Lee - corrosion engineering, MIMMM • Qing Lu - electrochemistry, ProfGradIMMM
18
Associations Independent Membership-based RTO, supporting 3500
Companies worldwide
International Experience Over 60 countries in Europe, Asia, North America, South America, Australia and Africa
Additional Information
19
NOTES