Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
RPS 100% Recycled High Density Mouldings, which are impervious to adverse climate and weather conditions, offer an economical decorative and design medium that are manufactured from renewable polystyrene resources. Introduced as a cost effective alternative to more costly polymer mouldings and millwork, RPS Mouldings will aesthetically satisfy all decorative requirements without having to compromise for lesser quality mouldings. The polystyrene compound from which RPS Mouldings are manufactured, not only produces a durable, impact resistant surface, making them ideally suited for use in highly trafficked environments, RPS Mouldings can be easily cut, nailed, glued, finished and installed using the same woodworking techniques and tools as wood and MDF mouldings & millwork.
DEM Mouldings and Millwork encompass a full decorative array of premium quality polyurethane cornice and panel mouldings, medallions, niches, stair brackets, pilasters and other ornamental products that are guaranteed to satisfy all decorative requirements without compromise. DEM is impervious to adverse climate and weather conditions, and, because of its dimensional stability, will not alter over time. Produced in exclusive molds that yield ornate and sharply defined details, perfect dimensions, and extremely consistent quality, DEM is lightweight, impact resistant and easy to install and finish using traditional woodworking techniques and tools.
Value and Design come together to create a line of millwork designed to give all your projects a distinctive finish... a designers finish.
Polystyrene High Density RPS Mouldings
Polyurethane DEM Mouldings
The “Original” Hybrid FormulaMP-25-ADH is a high performance, one component, permanently flexible, easy to use, multi-purpose fast cure modified acrylic latex sealant. MP-25-ADH cures rapidly when exposed to atmospheric moisture to form a durable bond.
• Use as adhesive or filler• Eco-friendly, low VOC’s• Fast cure • Paintable • Non-yellowing
2DistinctiveMouldings
T-2 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com
MP-25-ADHCAULK-GUN
10” Blade (200 teeth)RPS-10-200
CLICK PART# TO VIEW PRODUCT
1-1/4”
2-5/
8”
2-7/
8”
2”
2”
2-3/
4”
2-5/8”
2-3/
8”
3-1/
2”
2”
3-1/
8”
3-5/
8”
2-1/8”
2-3/
8”
3-1/
8”
2-1/8”
2-1/
8”
3”
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-4 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 Teeth
DEM-107 Length: 94-1/2”
Design Repeat: 2-1/2”
DEM-105 Length: 94-1/2”
Design Repeat: 1/2”
DEM-115 Length: 96”
Design Repeat: 1”
DEM-114 Length: 94-1/2”
Design Repeat: 3-15/16”
DEM-113Length: 94-1/2”
Design Repeat: 3/8”
DEM-111Length: 94-1/4”
Design Repeat: 1-7/8”
All dimensions are approximate.
Decorative CornicesDecorative Cornices CLICK PART# TO VIEW PRODUCT
3”
3”
4-1/
8”
3”
3”
4-1/
8”
2-7/8”
2-7/
8”
4”
2-13/16”
2-13
/16”
4”
2-9/16”
3-1/
8”
4”
2-1/4”
3-3/
8”
4”
New
New
Corners available:DEM-120-A & DEM-120-B, see page T-21a
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-5Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 Teeth
DEM-118Length: 94-1/2”
Design Repeat: 11/16”
RPS-1120 Length: 96”
Design Repeat: 3/4”
DEM-112 Length: 96”
Design Repeat: 1”
DEM-120 Length: 94-1/2”
Design Repeat: 3/4”
DEM-127Length: 94-1/2”
Design Repeat: 7-7/8”
DEM-119Length: 96”
Design Repeat: 2-5/8”
All dimensions are approximate.
Decorative CornicesDecorative CornicesCLICK PART# TO VIEW PRODUCT
3”
3-3/
8”
4-1/
2”
3-1/8”
2-3/
4”
4-1/
8”
3-5/8”
3-1/
8”
4-13
/16”
2”4-
1/2”
5”
3-1/4”
3-1/
2”
4-3/
4”
3-1/2”
3-1/
8”
4-5/
8”
Corners available:DEM-122-A & DEM-122-B, see page T-21a
Corners available:DEM-130-A & DEM-130-B, see page T-21a
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-6 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-125Length: 96”
Design Repeat: 1-15/16”
DEM-122 Length: 94-1/2”
Design Repeat: 1-1/2”
DEM-132Length: 94-1/2”
Design Repeat: 31-1/2”
DEM-130Length: 94-1/2”
Design Repeat: 4-1/2”
DEM-131Length: 94-1/2”
Design Repeat: 7” Corbel to Corbel
DEM-126Length: 94-1/2”
Design Repeat: 1”
Decorative CornicesDecorative Cornices CLICK PART# TO VIEW PRODUCT
3-5/8”
3-15
/16”
5-3/
8”
3-1/8”
4-1/
2”
5-1/
2”
3-3/
8”
5-1/
8”
3-7/8”
2-1/2”
4-1/
2”
5”
2-3/8”
4-3/
4”
5-1/
4”
3-3/8”
3-3/
4”
5”
Corners available:DEM-136-A & DEM-136-B, see page T-21a
Corners available:DEM-146-A & DEM-146-B, see page T-21a
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-7Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-136Length: 94-1/2”
Design Repeat: 1-1/2”
DEM-151Length: 94-1/2”
Design Repeat: 3-15/16”
DEM-146Length: 94-1/2”
Design Repeat: 4-1/2”
DEM-134Length: 94-1/2”
Design Repeat: 8”
DEM-142Length: 94-1/2”
Design Repeat: 12”
DEM-141Length: 96”
Design Repeat: 3”
Decorative CornicesDecorative CornicesCLICK PART# TO VIEW PRODUCT
4”
4”
5-1/
2”
3”5” 6”
4-3/4”
3-3/
4”
6”
4-1/8”
4-5/
16”
5-7/
8”
3-15/16”
3-15
/16”
5-5/
8”
3-3/
4”
5-1/
2”
4-1/8”
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-8 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-150Length: 96”
Design Repeat: 1-5/8”
DEM-147Length: 94-1/2”
Design Repeat: 3-1/2”
DEM-148Length: 94-1/2”
Design Repeat: 1-5/8”
DEM-164Length: 96”
Design Repeat: 3-1/4”
DEM-153Length: 95-3/4”
Design Repeat: 5/8”
DEM-149 Length: 96”
Design Repeat: 6”
Decorative CornicesDecorative Cornices CLICK PART# TO VIEW PRODUCT
4-1/4”
4-3/
4”
6-3/
8”
2-1/2”5-
7/8”
6-7/
16”
3-7/8”
4-5/
8”
6”
3-15/16”
4-1/
2”
6”
3-1/2”
4-15
/16”
6”
2-3/8”
5-1/
2”
6”
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-9Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-156Length: 94-1/2”
Design Repeat: 6”
DEM-159Length: 96”
Design Repeat: 12”
DEM-155Length: 96”
Design Repeat: 5-1/16”
DEM-157Length: 96”
Design Repeat: 3-7/8”
DEM-166Length: 96”
Design Repeat: 2”
DEM-158Length: 94-1/2”
Design Repeat: 3”
Decorative CornicesDecorative CornicesCLICK PART# TO VIEW PRODUCT
4-3/8”
5”
6-1/
2”
3-3/4”
5-1/
2”
6-5/
8”
4-3/8”
4-5/
8”
6-5/
16”
2-1/2”6-
1/2”
7”
4-5/8”
4-1/
2”
6-1/
2”
5-1/4”
4-1/
4”
6-7/
8”
New
Corners available:DEM-162-A & DEM-162-B, see page T-21a
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-10 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-161Length: 96”
Design Repeat: 3-3/8”
DEM-167Length: 94-1/2”
Design Repeat: 6-7/8”
DEM-169Length: 96”
Design Repeat: 3-3/4”
DEM-162Length: 94-1/2”
Design Repeat: 11-3/4”
DEM-172Length: 94-1/2”
Design Repeat: 2”
DEM-160Length: 94-1/2”
Design Repeat: 19”
Decorative CornicesDecorative Cornices CLICK PART# TO VIEW PRODUCT
5-7/8”
4-15
/16”
7-3/
4”
6-1/4”
5-1/
4”
8”
2-3/4”
6-7/
8”
7-3/
8”
5-3/8”
5-1/
4”
7-1/
2”
4-1/2”
5-1/
4”
7”
5-1/2”
5-1/
4”
7”
Corners available:DEM-174-A & DEM-174-B, see page T-21a
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-11Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-171Length: 96”
Design Repeat: 1-1/4”
DEM-175Length: 96”
Design Repeat: 9-1/2”
DEM-174Length: 94-1/2”
Design Repeat: 6”
DEM-168Length: 94-1/2”
Design Repeat: 7”
DEM-177Length: 94-1/2”
Design Repeat: 11-1/2”
DEM-170Length: 94-1/2”
Design Repeat: 2”
Decorative CornicesDecorative CornicesCLICK PART# TO VIEW PRODUCT
5-1/8”
6-7/
8”
8-1/
2”
6-5/8”
6-1/
2”
9-1/
8”
5-1/4”
6-15
/16”
8-5/
8”
6”
5-1/
2”
8-1/
8”
5-1/2”
7-7/
8”
9-5/
8”
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-12 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-183Length: 96”
Design Repeat: 3-1/4”
DEM-191Length: 96”
Design Repeat: 3-1/8”
DEM-179Length: 96”
Design Repeat: 5-1/2”
DEM-182Length: 94-1/2”
Design Repeat: 6-1/4”
DEM-178Length: 94-1/2”
Design Repeat: 4”
Decorative CornicesDecorative Cornices CLICK PART# TO VIEW PRODUCT
9”
7-1/
2”
11-3
/4”
8”
8-5/
16”
11-1
/2”
9”
7-1/
2”
11-3
/4”
8-7/8”
7”
11-1
/4”
6-5/16”
7-7/
8”
10-1
/16”
3-7/8”
9”
10”
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-13Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-196Length: 96”
Design Repeat: 3-1/4”
DEM-185Length: 95-1/2”
Design Repeat: 9-5/8”
DEM-193Length: 96”
Design Repeat: 2-3/4”
DEM-195Length: 96”
Design Repeat: 10-1/2”
DEM-184Length: 94-1/2”
Design Repeat: 4-1/8”
DEM-188Length: 96”
Design Repeat: 14”
Large Decorative CornicesLarge Decorative CornicesCLICK PART# TO VIEW PRODUCT
9-13/16”
9-15
/16”
14”
11-1/8”
11-1
5/16
”
16-5
/16”
11-1/8”
11-1
5/16
”
16-5
/16”
9”
8-5/
8”
12-1
/2”
9”
7-1/
2”
11-3
/4”
Can accommodate 10 corbels. See Page T-21b
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-13a ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-186Length: 94-1/2”
Design Repeat: 7-7/8”
DEM-189Length: 96”
Design Repeat: 9-1/2”
DEM-190Length: 96”
Design Repeat: 9-1/2”
DEM-199Length: 96”
Design Repeat: 8”
DEM-197Length: 96”
Design Repeat: 4-1/4”
Large Decorative CornicesLarge Decorative Cornices CLICK PART# TO VIEW PRODUCT
1-3/16”
1-3/
8”
1-3/
4”
1-1/8”
2-1/
4”
2-1/
4”
1-1/8”
1-1/
4”
1-5/
8”
5/8”
5/8”
5/8”
1-3/4”
1-7/
8”
2-1/
2”
New
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-14Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
BED MOULDINGRPS-0075Length: 96”
RPS-0283Length: 96”
RPS-0284Length: 96”
RPS-0201 (8 ft.)RPS-0201-12 (12 ft.)
BED MOULDINGRPS-0074 (8 ft.)
RPS-0074-12 (12 ft.)
DEM-201Length: 94-1/2”
Plain CornicesPlain CornicesCLICK PART# TO VIEW PRODUCT
1-5/8”
2-3/
4”
3-1/
8”
2-1/4”
2-3/
16”
3”
2-1/4”
2-3/
8”
3-1/
4”
2”
2”
2-7/
8”
2”
2”
2-7/
8”
New
New New
1-7/8”
2”
2-3/
4”
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-15 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
RPS-0208Length: 96”
DEM-202Length: 96”
DEM-204Length: 96”
DEM-208Length: 94-1/2”
DEM-203Length: 94-1/2”
RPS-0207 (8 ft.)RPS-0207-12 (12 ft.)
Plain CornicesPlain Cornices CLICK PART# TO VIEW PRODUCT
2-1/2”
2-1/
2”
3-1/
2”
2”3”
3-5/
8”
2”
3”
3-1/
2”
2-3/8”
2-3/
8”
3-3/
8”
2-1/2”
2-1/
2”
3-1/
2”
2-3/16”
2-5/
8”
3-3/
8”
New
New
Matches WM49
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-16Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-209Length: 94-1/2”
RPS-0189Length: 96”
DEM-211Length: 94-1/2”
DEM-206Length: 96”
RPS-0049 (8 ft.)RPS-0049-12 (12 ft.)
RPS-2210 (8 ft.)RPS-2210-12 (12 ft.)
Plain CornicesPlain CornicesCLICK PART# TO VIEW PRODUCT
2-3/4”
2-3/
4”
3-7/
8”
4”
1-13
/16”
4-3/
8”
2-3/4”
2-3/
8”
3-5/
8”
2-3/4”
2-3/
4”
3-7/
8”
3”
3”
4-1/
8”
New
New New
2-3/8”
3-1/
8”
3-7/
8”
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-17 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-212Length: 96”
DEM-213Length: 94-1/2”
DEM-220Length: 94-1/2”
DEM-214Length: 94-1/2”
DEM-231Length: 94-1/2”
DEM-207Length: 96”
Plain CornicesPlain Cornices CLICK PART# TO VIEW PRODUCT
3-1/8”
3-1/
8”
4-5/
8”
2-1/4”
3-7/
8”
4-1/
2”
3-1/8”
3-1/
8”
4-1/
2”
2-9/16”
3-1/
2”
4-3/
8”
3-1/2”
3-3/
8”
4-7/
8”
New
3-1/8”
3-1/
2”
4-3/
4”
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-18Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-233Length: 94-1/2”
RPS-2225Length: 96”
DEM-232Length: 96”
DEM-235Length: 94-1/2”
RPS-0183 (8 ft.)RPS-0183-12 (12 ft.)
DEM-230Length: 94-1/2”
Plain CornicesPlain CornicesCLICK PART# TO VIEW PRODUCT
5-3/8”
2-1/
8”
5-5/
8”
5”
4-1/
8”
6-1/
2”
3-15/16”
3-15
/16”
5-1/
2”
4-3/4”
4-3/
8”
6-1/
2”
New
2-7/8”
4”
5”
3-3/4”
3-3/
4”
5-1/
8”
Matches WM49
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-19 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-244Length: 94-1/2”
DEM-250Length: 94-1/2”
DEM-240Length: 94-1/2”
DEM-255Length: 94-1/2”
DEM-236Length: 94-1/2”
RPS-0045 (8 ft.)RPS-0045-12 (12 ft.)
Plain CornicesPlain Cornices CLICK PART# TO VIEW PRODUCT
5”
4-1/
8”
6-1/
2”
5”
5” 7”
4-3/4”
4-7/
8”
6-1/
2”
6”
4-1/
8”
7-1/
4”
4-3/4”
6-1/
8”
7-3/
4”
New
New
5-3/4”
5-3/
4”
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-19aPhone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-261Length: 94-1/2”
DEM-260Length: 96”
DEM-270Length: 94-1/2”
DEM-269Length: 94-1/2”
DEM-265Length: 94-1/2”
DEM-271Length: 96”
Plain CornicesPlain CornicesCLICK PART# TO VIEW PRODUCT
6-1/4”
7”
9-1/
2”
5-3/4”
6-1/
2”
8-5/
8”
6-1/4”
6-1/
4”
8-7/
8”
5-7/8”
5-11
/16”
8-1/
8”
Great for indirect lighting
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-19b ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-276Length: 96”
DEM-277Length: 96”DEM-274
Length: 96”
DEM-272Length: 94-1/2”
Plain CornicesPlain Cornices CLICK PART# TO VIEW PRODUCT
9-13/16”
9-13
/16”
14”
7-3/16”
6-3/
4”
9-9/
16”
7-7/8”
5-5/
16”
9-1/
2”
8-3/4”
8-3/
4”
12-3
/8”
Corners available:DEM-273-A & DEM-273-B, see page T-21b
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-19cPhone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-273Length: 94-1/2”
DEM-275Length: 96”
DEM-283Length: 96”
DEM-280Length: 96”
Large Plain CornicesLarge Plain CornicesCLICK PART# TO VIEW PRODUCT
CROWN MOULDING
DEM-260V and DEM-275V can be mitered tocreate 2 inside corners
INSIDE “V” CORNER MOULDING
Combination Moulding ApplicationCROWNINSIDE “V”
MOULDINGDECORATIVE
CENTERINSIDE “V”
MOULDING
DECORATIVE CENTER MOULDING
Close-up
Close-up
TWO SIZES AVAILABLE
7-3/16”
6-3/
4”
9-9/
16”
4-3/4”4-
7/8”
6-1/
2”
POLYURETHANE DEM MOULDINGS
DEM-260DEM-260CDEM-260V
DEM-275DEM-275CDEM-275V
T-20 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
DEM-260V length 96”
DEM-260C length 96” DEM-275C length 96”
DEM-275V length 96”
DEM-260 length 96” DEM-275 length 96”
Perfect Blade for RPS & DEM MouldingsRPS-10-200...10” Blade, 200 Teeth
All dimensions are approximate.
Combination MouldingsCombination Mouldings CLICK PART# TO VIEW PRODUCT
4” W
4-3/4” W
4-3/4” W
Works with our DEM Mouldings:
Works with our DEM Mouldings:
Works with our DEM Mouldings:
Works with our DEM Mouldings:
Works with our DEM Mouldings:
DEM-120...page T-5DEM-122...page T-6 DEM-130...page T-6
DEM-220...page T-17DEM-230...page T-18
DEM-105...page T-4DEM-111...page T-4 DEM-113...page T-4
DEM-114...page T-4DEM-115...page T-4
DEM-115...page T-4DEM-125...page T-6 DEM-126...page T-6DEM-130...page T-6
DEM-136...page T-7DEM-220...page T-17DEM-230...page T-18
DEM-132...page T-6DEM-142...page T-7 DEM-146...page T-7DEM-150...page T-8
DEM-157...page T-9DEM-235...page T-18DEM-244...page T-19
DEM-125...page T-6DEM-142...page T-7 DEM-146...page T-7DEM-150...page T-8
DEM-157...page T-9DEM-235...page T-18DEM-244...page T-19
Works with our RPS Mouldings:
Works with our RPS Mouldings:
Works with our RPS Mouldings:
Works with our RPS Mouldings:
Works with our RPS Mouldings:
RPS-0049...page T-16RPS-0189...page T-16RPS-1120...page T-5
RPS-2210...page T-16RPS-2225...page T-18
RPS-0049...page T-16RPS-0189...page T-16RPS-0207...page T-15
RPS-2210...page T-16
RPS-0049...page T-16RPS-0183...page T-18
RPS-2210...page T-16RPS-2225...page T-18
RPS-0045...page T-19RPS-0183...page T-19a
RPS-0045...page T-19RPS-0183...page T-18
All dimensions are approximate.
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
3-1/8” W
T-21Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
OUTSIDE CORNERDEM-10
Height: 3”Projection: 4-1/8”
OUTSIDE CORNERDEM-15
Height: 4”Projection: 5-1/4”
OUTSIDE CORNERDEM-18
Height: 4-3/4”Projection: 6-3/4”
OUTSIDE CORNERDEM-21
Height: 4-3/4”Projection: 6-1/2”
CENTERDEM-11
Height: 3” Projection: 3”
CENTERDEM-16
Height: 4” Projection: 4”
CENTERDEM-19
Height: 4-3/4” Projection: 4-5/8”
CENTERDEM-22
Height: 4-3/4” Projection: 4-3/4”
INSIDE CORNERDEM-12
Height: 3”Projection: 4-1/8”
INSIDE CORNERDEM-17
Height: 4”Projection: 5-1/4”
INSIDE CORNERDEM-20
Height: 4-3/4”Projection: 6-3/4”
INSIDE CORNERDEM-23
Height: 4-3/4”Projection: 6-1/2”
OUTSIDEDEM-13
Height: 3-3/4”Projection: 5”
INSIDEDEM-14
Height: 3-3/4”Projection: 5”
Perfect Blade for RPS & DEM MouldingsRPS-10-200...10” Blade, 200 Teeth
Decorative CornersDecorative CornersCLICK PART# TO VIEW PRODUCT
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-21aPhone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
INSIDEDEM-120-A
OUTSIDEDEM-120-B
Pre-mitered cornersWorks with
DEM-120 pg. T-5
INSIDEDEM-122-A
OUTSIDEDEM-122-B
Pre-mitered cornersWorks with
DEM-122 pg. T-6
INSIDEDEM-130-A
OUTSIDEDEM-130-B
Pre-mitered cornersWorks with
DEM-130 pg. T-6
INSIDEDEM-136-A
OUTSIDEDEM-136-B
Pre-mitered cornersWorks with
DEM-136 pg. T-7
INSIDEDEM-146-A
OUTSIDEDEM-146-B
Pre-mitered cornersWorks with
DEM-146 pg. T-7
INSIDEDEM-162-A
OUTSIDEDEM-162-B
Pre-mitered cornersWorks with
DEM-162 pg. T-10
INSIDEDEM-174-A
OUTSIDEDEM-174-B
Pre-mitered cornersWorks with
DEM-174 pg. T-11
Decorative CornersDecorative CornersCLICK PART# TO VIEW PRODUCT
4”
4”
1-1/4”Deep
9/16” Groove on back to accommodate moulding
Works with
RPS-0376 Moulding
7-3/8”
7-3/8”
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-21bPhone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
INSIDEDEM-273-A
OUTSIDEDEM-273-B
Pre-mitered cornersWorks with
DEM-273 pg. T-19c
INSIDE CORNERDEM-485IC
4-5/16” x 4-5/16” x 1”Works with
DEM-485 pg. T-35a
RPS-0376-A9/16” groove on back
to accommodate moulding
Works with RPS-0376 pg. T-34
OUTSIDE CORNERDEM-485OC
4-3/4” x 4-3/4” x 1”Works with
DEM-485 pg. T-35a
DEM-190A3-7/8” x 2-13/16”
x 2-3/4”Works with
DEM-190 pg. T-13a
DEM-190B4” x 2-3/4” x 2-5/8”
Works with DEM-190 pg. T-13a
Corbels are easily applied with our adhesive MP-25-ADH...10.1 oz. tube
CornersCorners
Base CornersBase CornersPlain CornersPlain Corners
Decorative Keystone Decorative Keystone Applique Applique
CorbelsCorbels
CLICK PART# TO VIEW PRODUCT
Peel & Stick
Adhesive
Adjustable Adhesive
Permanent Adhesive
• Peel & Stick – Fast, easy installation without glue or nails• Moisture Resistant – Great for bathrooms, kitchens, and basements• High Impact – Polymer material is as hard as oak• Paintable – Smooth surface is ready to paint without priming• Eco-friendly – Made from 100% recycled polystyrene
High Impact Peel & Stick Mouldings With Pre-Mitered Inside & Outside Corners.
See Pages T-22b~T-22c, For Our Coordinating 1 Piece Panel Frames
T-22 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com
Trim FastTrim Fast™™New
CLICK PART# TO VIEW PRODUCT
Crown Moulding
Crown Corners
Panel Corners
Baseboard Corners
Panel Moulding Baseboard Moulding
(2) 1/2” permanent adhesive strips on the bottom backof the moulding.
1/2” adjustable peel and stick adhesive strip on the top back of the moulding to allow for adjustment of moulding placement before adhering the 1/2” permanent adhesive strip on the bottom back of the moulding.
Pre-Mitered Inside & Outside Corners
Free tube of filler:RD-0775
2”
3”
3-1/
2”5/8”
2-5/
8”
1/2”
5-5/
8”
Great For Indirect Lighting
Both corners come in two pieces that are 15-3/4” long and cut at 45 degrees
Assembly Required
T-22aPhone:1-800-835-4400 • Fax:1-800-835-4403
TFM-49-ALength: 96”
TFM-390-A • Length: 96” TFM-4475-A • Length: 96”
Inside CornerTFM-49-IC-A
Inside CornerTFM-390-IC-A
Inside CornerTFM-4475-IC-A
Outside CornerTFM-49-OC-A
Outside CornerTFM-390-OC-A
Outside CornerTFM-4475-OC-A
Trim FastTrim Fast™™New
CLICK PART# TO VIEW PRODUCT
Why cut and miter?
Outwater’s NEW Panel Frames Can Be UsedFor Wall Panels, Wainscoting & Doors
Use these simple, peel & stick, pre-assembled, one piece panel frames to add elegance and enhance the beauty of any room.
Material:High ImpactPolystyrene
T-22b ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com
Trim FastTrim Fast™™ Panel Frames Panel Frames NewCLICK PART# TO VIEW PRODUCT
Material: High Impact Polystyrene
• Peel & Stick – Fast, easy installation without glue or nails• Moisture Resistant – Great for bathrooms, kitchens, and basements• High Impact – Polymer material is as hard as oak• Paintable – Smooth surface is ready to paint without priming• Eco-friendly – Made from 100% recycled polystyrene • Panels are pre-assembled
9/16”
1-1/
8”
*Sizes listed are outside dimensions
T-22cPhone:1-800-835-4400 • Fax:1-800-835-4403
PNFR2436-WH23-5/8” x 35-7/16” x 9/16”
PNFR2432-WH23-5/8” x 31-1/2” x 9/16”
PNFR1232-WH11-13/16” x 31-1/2” x 9/16”
PNFR2428-WH23-5/8” x 27-9/16” x 9/16”
Trim FastTrim Fast™™ Panel Frames Panel FramesNewCLICK PART# TO VIEW PRODUCT
3-1/16”
6-3/16”
3-1/16”
6-3/16”
3-1/16”
6-3/16”
3-1/16”
• One piece pre-assembled, Corners & Centers.No need to construct your own center and outside corner, we’ve done the work for you, saving valuable time.
• Primed and ready for paint.• Lightweight and easy to install, corners and centers can be cut
with a saw, nail and glue just like wood.
Our corner and center blocks allow you to install cornice mouldings quickly and easily with no need for mitering. Adding these architectural embellishments will highlight the beauty and visual appeal that crown moulding offers.
7-3/4”
3-7/8”
3-7/8”
3-1/16”
13-3/4”
6-7/8”
6-7/8”
5-1/2”
Crown Moulding cannot exceed 6-3/4” height and 5-1/2” projection Many great crown options can be found on pages T-9~10
Crown Moulding cannot exceed 3-3/16” height and 3” projection Many great crown options can be found on pages T-9~10
Approximate adhesive yields*Mouldings 2” + Under – 60’Mouldings 2 - 5” – 45’Mouldings 5” + Over – 30’* Yields are approximate and
based on average conditions and installation technique.
5-1/2”
5-1/2”
11-1/8”
5-1/2”
5-1/2”
5-1/2”
11-1/8”
11-1/8”
3-1/16”
HIGH DENSITY POLYURETHANE
T-23Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
DEM-30INSIDE
CORNER
DEM-31CENTER
DEM-32OUTSIDE CORNER
DEM-33INSIDE
CORNER
DEM-34CENTER
DEM-35
OUTSIDE CORNER
MP-25-ADH 10.1 oz. tubeMulti-Purpose Adhesive
CAULK-GUNAll dimensions are approximate.
Large Decorative DropsLarge Decorative DropsCLICK PART# TO VIEW PRODUCT
5/8”
1”
3/4”
2-1/
4”
3/4”
1-7/
8”
7/8”
1-3/
8”
3/8”
1-1/
4”
1-1/8”
1-3/
4”
3/4”
1-5/
8”
Corner available:DEM-305A, see page T-29
Corner available:DEM-313A, see page T-29
Corner available:DEM-315A, see page T-30
Over Corner available:DEM-314A & DEM-314-L/R, see page T-29
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-24 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
RPS-3305Length: 96”
Design Repeat: 1”
RPS-3307Length: 96”
Design Repeat: 2-1/4”
DEM-313Length: 94-1/2”
Design Repeat:10”
DEM-311Length: 94-1/2”
Design Repeat: 2-1/2”
DEM-315Length: 94-1/2”
Design Repeat: 2-3/8”
DEM-314Length: 96”
Design Repeat: 7”
DEM-303Length: 96”
Design Repeat: 7/8”
DEM-303F - FlexibleLength: 93”
Design Repeat: 7/8”Max Radius 8”
Decorative Panel MouldingsDecorative Panel Mouldings CLICK PART# TO VIEW PRODUCT
5/8”
2”
1/2”
3”
1”
2-3/
4”
3/4”
2”
7/8”
2”
7/8”
2”
3/8”
2-1/
2”
3/4”
2-3/
8”
New
Corner available:DEM-320A, see page T-30
Corner available:DEM-321A, see page T-30
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-25Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-322Length: 96”
Design Repeat: 1-1/2”
DEM-318Length: 96”
Design Repeat: 8”
DEM-320Length: 96”
Design Repeat:1-3/8”
DEM-323Length: 94-1/2”
Design Repeat:1-1/4”
DEM-321Length: 94-1/2”
Design Repeat: 1-3/8”
DEM-327Length: 94-1/2”
Design Repeat: 5-1/2”
DEM-326Length: 96”
Design Repeat: 1/2”Dots 24 per 12”
RPS-3319Length: 96”
Design Repeat: 1-3/4”
Decorative Panel MouldingsDecorative Panel MouldingsCLICK PART# TO VIEW PRODUCT
1”
3”
1”
3-1/
2”
1-1/8”
3”
3/4”
3-1/
8”
1-1/4”
4”
7/8”
3-5/
8”
Corner available:DEM-331A, see page T-30
Corner available:DEM-336A, see page T-30
New
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-25a ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-332Length: 96”
Design Repeat: 5”
DEM-328Length: 96”
Design Repeat: 7”
DEM-331Length: 94-1/2”
Design Repeat:1-3/4”
DEM-336Length: 94-1/2”
Design Repeat: 4”
DEM-338Length: 96”
Design Repeat: 3/4”
DEM-330Length: 96”
Design Repeat: 3/4”
Decorative Panel MouldingsDecorative Panel Mouldings CLICK PART# TO VIEW PRODUCT
3/8”
7/8”
5/8”
2”
1/2”
1-5/
8”
7/16”
1-3/
8”
7/16”
1-1/
8”
11/16”
1-1/
8”
5/8”
1-5/
8”
11/16”
1-5/
8”Matches LWM135
Matches WM164
Corner available:DEM-400A, see page T-31
Corners available:DEM-405B, C, D, F, see page T-31
Corner available:DEM-410A, see page T-31
Corners available:DEM-415A, DEM-415B, see page T-31
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-26Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
BASE CAPRPS-0282Length: 96”
RPS-4405Length: 96”
RPS-4400Length: 96”
DEM-415Length: 94-1/2”
RPS-4410Length: 96”
ASTRAGALRPS-0167Length: 96”
BASE CAPRPS-0234Length: 96”
BASE CAPRPS-0164 (8 ft.)
RPS-0164-12 (12 ft.)
Plain Panel MouldingsPlain Panel MouldingsCLICK PART# TO VIEW PRODUCT
1”
2”
7/8”
3-1/
8”
13/16”
2-9/
16”
11/16”
2-5/
8”
1”
3-1/
2”
1”
3-3/
8”
New
Corner available:DEM-419A, see page T-31Matches WM390
Matches WM298
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-27 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-420Length: 94-1/2”
RPS-0298Length: 96”
DEM-425Length: 94-1/2”
DEM-416Length: 94-1/2”
DEM-419Length: 94-1/2”
RPS-0390Length: 96”
Plain Panel MouldingsPlain Panel Mouldings CLICK PART# TO VIEW PRODUCT
These products are decorative and designed to eliminate mitering and butt joints. The covers will hide any imperfections on moulding edges and save time on installation.
When two ends of material are joined by butting them together using adhesive and caulk or other type of filler. These items need to have a tight fit and may require sanding,build up and caulking.
Large 90º MitrelessCorner Cover
Small 90º MitrelessCorner Cover
Our corners allow for miscuts up to 1/4”
The 90˚ Mitreless Corner Cover & 180˚ Mitreless Straight Cover
The 90º Butt Joint Corner & 180˚ Straight Butt Joint
180º MitrelessStraight
Cover
90º Butt Joint Corner180º Straight Butt Joint
Mitreless Cover & Butt Joint Corner
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
All dimensions are approximate.
T-28 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Panel Mouldings / AccessoriesPanel Mouldings / Accessories CLICK PART# TO VIEW PRODUCT
Shown with DEM-314A
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
All dimensions are approximate.
T-29Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
90˚ MITRELESS CORNER COVERDEM-314-L/R16” W x 18” H
Left and Right
90˚ MITRELESS CORNER COVERDEM-314A
14-1/4” x 14-1/4”
90˚ BUTT JOINT CORNERDEM-305A
8-1/2” x 8-1/2”
RPS-33051-1/4” x 3/8” x 96”
90˚ BUTT JOINT CORNERDEM-313A
8-7/8” x 8-7/8”
DEM-3131-5/8” x 1-1/8” x 94-1/2”
DEM-3141-7/8” x 3/4” x 96”
Panel Mouldings / AccessoriesPanel Mouldings / AccessoriesCLICK PART# TO VIEW PRODUCT
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
T-30 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
All dimensions are approximate.
90˚ BUTT JOINT CORNERDEM-315C
9-7/8” x 9-7/8” x 3/4”
90˚ BUTT JOINT CORNERDEM-315F
12-3/4” x 12-3/4” x 3/4”
‹ ROSETTEDEM-315D 2-1/2” Dia. x 1/2” Thick
90˚ BUTT JOINT CORNER ›DEM-331B
16-1/8” x 16-1/8”
‹ 90˚ BUTT JOINT CORNERDEM-331A
19-7/8” x 19-7/8”
90˚ BUTT JOINT CORNERDEM-315E
10” x 10” x 3/4”
90˚ BUTT JOINT CORNERDEM-315A
10-1/2” x 11”
DEM-3151-7/8” x 3/4” x 94-1/2”
DEM-3313-1/8” x 3/4” x 94-1/2”
90˚ MITRELESS CORNER COVERDEM-320A
9” x 9” x 1-1/4”
DEM-3202” x 7/8” x 96”
90˚ BUTT JOINT CORNERDEM-321A
10-1/4” x 10-1/4”
DEM-3212-3/8” x 3/4” x 94-1/2”
90˚ MITRELESS CORNER COVERDEM-336A
11-3/8” x 11-3/8”
DEM-3364” x 1-1/4” x 96”
Panel Mouldings / AccessoriesPanel Mouldings / Accessories CLICK PART# TO VIEW PRODUCT
Shown with DEM-400A
Hand Carved
Wood
Hand Carved Wood
Hand Carved
Wood
Hand Carved Wood
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
T-31Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
All dimensions are approximate.
‹ 90˚ MITRELESS CORNER COVER
DEM-400-E3” x 3”
180˚ MITRELESS ›CORNER COVER
DEM-400-F3-1/4” x 2-3/4”
‹ 90˚ BUTT JOINT CORNER
DEM-400A 5-1/16” x 5-1/16”
90˚ BUTT ›JOINT CORNER
DEM-400B7-3/8” x 7-3/8”
RPS-44001-5/8” x 11/16” x 96”
‹ 180˚ MITRELESS STRAIGHT COVER
DEM-405-F3-1/4” x 2-3/4”
180˚ BUTT › JOINT CORNER
DEM-405C6-1/8” x 6-1/8”
90˚ BUTT ›JOINT CORNER
DEM-410A 7-3/4” x 7-3/4”
‹ 90˚ MITRELESS CORNER COVER
DEM-405D9” x 9”
90˚ MITRELESS ›CORNER COVER
DEM-405-E3-1/8” x 3-1/8”
RPS-44101-5/8” x 1/2” x 96”
RPS-44051-1/2” x 5/8” x 96”
90˚ MITRELESS CORNER COVER
DEM-415A10” x 10”
180˚ MITRELESS STRAIGHT COVER
DEM-415B15” x 4”
90˚ MITRELESS CORNER COVERDEM-419A
11-3/8” x 11-3/8”
DEM-4192-9/16” x 13/16” x 94-1/2”
DEM-4152” x 5/8” x 94-1/2”
‹ 180˚ STRAIGHT BUTT JOINTDEM-405B
9-1/4” x 4-3/8”
Panel Mouldings / AccessoriesPanel Mouldings / AccessoriesCLICK PART# TO VIEW PRODUCT
1”
7-1/
16”
1”7-
1/16
”
7/8”
5-1/
8”
3/8”
3”
5/8”
5”
3/4”
4-3/
8”
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-32Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-333Length: 94-1/2”
Design Repeat: 6-1/4”
DEM-384Length: 96”
Design Repeat: 7”
DEM-381Length: 94-1/2”
Design Repeat: 3”
DEM-385 Length: 96”
Design Repeat: 5”
DEM-335Length: 94-1/2”
Design Repeat: 19”
DEM-334Length: 96”
Design Repeat: 12”
FriezesFriezesCLICK PART# TO VIEW PRODUCT
1-3/4”
9-3/
8”
1”
7-7/
8”
1”
7-1/
16”
1-3/8”
7-7/
8”
1”
7-1/
16”
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-32a ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-392Length: 96”
Design Repeat: 5-1/8”
DEM-398Length: 96”
Design Repeat: 2”
DEM-390Length: 96”
Design Repeat: 12”
DEM-397Length: 96”
Design Repeat: 1”
DEM-395Length: 96”
Design Repeat: 16”
FriezesFriezes CLICK PART# TO VIEW PRODUCT
1”
1/2”
1-1/2”
1-1/
8”
1/4”1/2” R
1/4”
3/4”
3/4”
7/16”
3/4”
3/4”
3/4”
3/4”
3/8”
Matches WM127 Matches RB122
Matches WM105 Matches WM93
Matches WM120
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-33Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
SHOE MOULDINGRPS-0127-07
Length: 96”
FOR 1/2” BOARDRPS-0494
Length: 96” for 1/2” board
QUARTER ROUNDRPS-0105 (8 ft.)
RPS-0105-12 (12 ft.)
HALF ROUNDRPS-0052 (8 ft.)
RPS-0052-12 (12 ft.)
SCOTIA MOULDINGRPS-0093 (8 ft.)
RPS-0093-12 (12 ft.)
HALF ROUNDRPS-0120 (8 ft.)
RPS-0120-12 (12 ft.)
Common MouldingsCommon MouldingsCLICK PART# TO VIEW PRODUCT
1-1/2”
1-1/
2”
2-1/
8”
1-5/8”
9/16
”
1-9/16”1-
1/4”
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-33a ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DOOR STOPRPS-0935Length: 96”
CAP/BACKBANDRPS-0490 (8 ft.)
RPS-0490-12 (12 ft.)Length: 96” for 3/4” board
ANGLE MOULDINGRPS-2205 (8 ft.)
RPS-2205-12 (12 ft.)
Common MouldingsCommon Mouldings CLICK PART# TO VIEW PRODUCT
11/16”
3/16”
2-1/
2” 1/2”1”
2-5/
8” 3/8”
11/16”
1/8”
2-1/
4”
3/16”
1-1/4”
1-1/
2”
5/8”
3/8”
2-1/
4”
1”
1-3/
4”
3/8”
Matches WM376 Matches WM327
Matches WM361
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-34Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
RPS-0493-07Length: 96”
for 1/2” board
CAP/BACKBANDRPS-0492-07
Length: 96” for 3/8” board
RPS-0376Length: 96”
RPS-0327Length: 96”
RPS-0491-07Length: 96”
for 3/8” board
RPS-0361Length: 96”
Case MouldingsCase MouldingsCLICK PART# TO VIEW PRODUCT
1-3/8”
7-3/
4”
1-1/8”
3-1/
2”
1-3/8”
7-3/
4”
1-1/8”
11/16”
3-5/
8”
Matches RB3
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-34a ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
DEM-430Length: 94-1/2”
DEM-396Length: 96”
RPS-0299Length: 96”
DEM-394Length: 96”
Design Repeat: 1-1/2”
Case MouldingsCase Mouldings CLICK PART# TO VIEW PRODUCT
5/8”
4-3/
4”
1/2”
3-1/
8”
5/8”
4”
3/4”
4-3/
4”
1/2”
5-5/
8”
1/2”
4”
New
New New
Matches WM163E
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
T-35Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
RPS-0431Length: 96”
RPS-4440Length: 96”
RPS-4455Length: 96”
RPS-4475Length: 96”
DEM-435DEM-435-F - Flexible
Length: 94-1/2” 10” Max Radius
on Flexible
RPS-4450Length: 96”
Base MouldingsBase MouldingsCLICK PART# TO VIEW PRODUCT
7/8”
7-3/
4”
5/8”
7-3/
4”
New
New
9/16”
1”
7-3/
8”
Corners available:DEM-485IC & DEM-485OC, see page T-21b
POLYURETHANE DEM MOULDINGS • POLYSTYRENE RPS MOULDINGS
RPS PRODUCT information can be found on page T-2
• 100% Recycled Polystyrene• High Impact• Recommended blade 10” Blade, 200 Teeth
Cover up your old baseboards with RPS-4887-OVER
Fits Over Max 5” H x 9/16” Proj.
T-35a ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Perfect Blade for RPS & DEM MouldingsRPS-10-200
10” Blade, 200 TeethAll dimensions are approximate.
RPS-4887-0VERLength: 96”
RPS-4870Length: 96”
DEM-485Length: 94-1/2”
Base MouldingsBase Mouldings CLICK PART# TO VIEW PRODUCT
POLYURETHANE ARCHITECTURAL ELEMENTS
New
New
For our complete line of CEILING DOMES,see pgs. S-29~33
T-36 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
All dimensions are approximate.
DEM-5079-11/16” Dia.Projection:
1-3/16”
DEM-51112-11/16” Dia.
Projection: 1-1/16”
ID: 3-15/16”
DEM-51715-3/4” Dia.Projection:
13/16”ID: 3-15/16”
DEM-51816-3/4” Dia.Projection:
1-3/8”
DEM-51415-1/2” Dia.
DEM-51012” Dia.
Projection: 1-1/8”
DEM-51315” Dia.
Projection: 1-3/4”
DEM-51515-3/4” Dia.Projection:
1-7/8”
DEM-51616-1/2” Dia.Projection:
1-1/2”
DEM-51918” Dia.
Projection: 1-1/2”
ID: 3-5/8”
Decorative MedallionsDecorative Medallions CLICK PART# TO VIEW PRODUCT
POLYURETHANE ARCHITECTURAL ELEMENTS
New
For our complete line of CEILING DOMES,see pgs. S-29~33
T-37Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
All dimensions are approximate.
DEM-52218” Dia.
Projection: 1-1/2”
ID: 3-5/8”
DEM-52018” Dia.
Projection: 1-1/2”
ID: 3-5/8”
DEM-52518” Dia.
Projection: 1-1/2”
ID: 3-5/8”
DEM-53118” Dia.
Projection: 1-7/8”
ID: 3-5/8”
DEM-53418” Dia.
Projection: 1-3/8”
ID: 3-5/8”
DEM-53718” x 18”
Projection: 1-5/8”
ID: 3-5/8”
DEM-52118” Dia.
Projection: 1-3/4”
DEM-52818” Dia.
Projection: 1-1/2”
ID: 3-5/8”
DEM-54320-1/2” Dia.Projection:
1-1/2”
DEM-54019” Dia.
Projection: 1-5/8”
Decorative MedallionsDecorative MedallionsCLICK PART# TO VIEW PRODUCT
POLYURETHANE ARCHITECTURAL ELEMENTS
For our complete line of CEILING DOMES,see pgs. S-29~33
T-38 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
All dimensions are approximate.
DEM-54922-5/8” Dia.Projection:
1-3/4”
DEM-55523-5/8” Dia.Projection:
3-1/2”
DEM-55823-5/8” Dia.Projection:
2-1/8”ID: 3-5/8”
DEM-56124” Dia.
Projection: 3”
DEM-56424-1/4” Dia.
Projection: 2”
DEM-54621” Dia.
Projection: 1-3/8”
DEM-54521” Dia.
Projection: 1-15/16”
DEM-55223-5/8” Dia.Projection:
2-3/4”
DEM-56625-9/16” Dia.Projection:
5-1/2”
DEM-56324-3/8” Dia.Projection:
1-1/2”
Decorative MedallionsDecorative Medallions CLICK PART# TO VIEW PRODUCT
POLYURETHANE ARCHITECTURAL ELEMENTS
New
New
New
For our complete line of CEILING DOMES,see pgs. S-29~33
T-39Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
All dimensions are approximate.
DEM-57329-1/8” Dia.Projection:
1-1/2”
DEM-57630” Dia.
Projection: 2-3/8”
DEM-57831-1/2” Dia.Projection:
1-15/16”
DEM-57931-1/2” Dia.Projection:
1-7/8”
DEM-58332-11/16” Dia.
Projection: 1-7/8”
DEM-57028-1/8” Dia.Projection:
1-7/8”
DEM-56727-1/8” Dia.Projection:
2-1/2”
DEM-58232-5/8” Dia.
Projection: 2”
DEM-57530” Dia.
Projection: 2-9/16”
ID: 3-15/16”
DEM-57730-1/2” Dia.Projection:
1-9/16”
Decorative MedallionsDecorative MedallionsCLICK PART# TO VIEW PRODUCT
POLYURETHANE ARCHITECTURAL ELEMENTS
New
New
For our complete line of CEILING DOMES,see pgs. S-29~33
T-40 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
All dimensions are approximate.
DEM-58537-1/2” Dia.Projection:
3-1/2”
DEM-58135-3/16” Dia.Projection:
2-9/16”ID: 3-15/16”
DEM-592Long Side: 18-1/2”Short Side: 13-1/2”
Projection: 2”
DEM-593Long Side: 24”
Short Side: 20-1/2”Projection: 1-3/16”
DEM-594Long Side: 23-3/4”Short Side: 12-1/4”Projection: 1-3/4”
SURFACE MOUNT CEILING
DOME/MEDALLIONDEM-584
37-1/4” Dia.Projection:
4-1/2”
DEM-590Long Side: 17”Short Side: 12”
Projection: 1-5/8”
DEM-595Long Side: 37”Short Side: 26”
Projection: 1-3/8”
DEM-596Long Side: 30-1/2”
Short Side: 20”Projection: 1-1/2”
DEM-598Long Side: 36”Short Side: 26”
Projection: 1-5/8”
Decorative MedallionsDecorative Medallions CLICK PART# TO VIEW PRODUCT
11-7/16” x 7-5/8” x 1-1/8”
11” x 7” x 5/8”
13-11/16” x 7-1/2” x 13/16”
Approximate adhesive yields*Mouldings 2” + Under – 60’Mouldings 2 - 5” – 45’Mouldings 5” + Over – 30’*Yields are approximate and based on average conditions and installation technique.
9-7/16” x 9-7/16” x 3/4”
W
Right
Left
W
H
H
POLYURETHANE ARCHITECTURAL ELEMENTS
8-7/16” x 5-7/8” x 5/8”7” x 8-11/16” x 3/4”
9” x 7” x 9/16”
11” x 6-5/16” x 9/16”
11-13/16” x 7-1/2” x 9/16”
T-41Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
MP-25-ADH 10.1 oz. tubeMulti-Purpose Adhesive
DEM-671L DEM-671R
DEM-683L DEM-683R
DEM-687L DEM-687R
DEM-689L DEM-689R
DEM-677L DEM-677R
DEM-682L DEM-682R
DEM-685L DEM-685R
DEM-673L DEM-673RDEM-679L DEM-679R
CAULK-GUN
Stair BracketsStair BracketsCLICK PART# TO VIEW PRODUCT
PLIN
THS
CA
PITA
LS
DEM-705 SeriesDEM-705 Series Pilaster Capitals To Choose From:
PILA
STER
S
POLYURETHANE ARCHITECTURAL ELEMENTS
T-42 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
DEM-705F 12-1/8” H x 6-5/8” W
1” Projection
DEM-705 78-3/4” L x 5-3/4” W
5/8” Projection
DEM-705A 6-1/8” H x 10-1/2” W
3” Projection
DEM-705C 7-3/8” H x 8-1/4” W 2-1/4” Projection
DEM-705B 3” H x 9-3/8” W
2-1/4” Projection
PilastersPilasters CLICK PART# TO VIEW PRODUCT
DEM-715 Series DEM-720 SeriesDEM-710 Series
CA
PITA
LS
PILA
STER
S
PLIN
THS
POLYURETHANE ARCHITECTURAL ELEMENTS
All dimensions are approximate. Important: See Page T-2 For Shipping Program
1-1/8”
9-7/
8”
1-1/8”
12-1
/2”
1-1/2”
17-3
/4”
T-43Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
DEM-720A 25-1/4” H x 25-3/8” W
8-1/4” Projection
DEM-720 94-1/2” L x 17-3/4” W
1-1/2” Projection
DEM-720B31-5/8” H x 23-5/8” W
5-1/2” Projection
DEM-715A 17” H x 21-5/8” W 7-1/2” Projection
DEM-715 78-3/4” L x 12-1/2” W
1-1/8” Projection
DEM-715B20-7/8” H x 15” W 2-1/8” Projection
DEM-710B 6-1/4” H x 13-1/8” W
2-3/4” Projection
DEM-710 78-3/4” L x 9-7/8” W
1-1/8” Projection
DEM-710A 7-1/8” H x 17-1/2” W
2-5/8” Projection
Massive PilastersMassive PilastersCLICK PART# TO VIEW PRODUCT
The examples shown can be
applied to most entryways.
Door opening configurations
may vary. Please measure
your specific opening or
application.
DEM-780-L
DEM-396
DEM
-780-R
DEM-394DEM-740
DEM-783-L
DEM-733
DEM
-783-R
DEM-745
DEM-785-L DEM-785-R
8-1/4”
10-1/16”
8-1/4”
9-3/4”
8-1/4”
9-1/16”
CAPITAL & MOULDING ASSEMBLY
FIELD SANDING REQUIRED TO USE ACCESSORIES WITH PANEL MOULDINGS
31-1/2”
7-3/4”
1-3/4” PROJECTION
21”
7-3/4”
1-3/4” PROJECTION
1-3/16” PROJECTION
86-5/8”
6-7/8”
ADJU
STABLE
17-3/4”
POLYURETHANE ARCHITECTURAL ELEMENTS• For Interior & Exterior Applications. • Will not split, decay, warp or rot. • Primed and ready to paint.
(When using as an exterior application, we recommend using a “UV” stabilized paint).
All dimensions are approximate. Important: See Page T-2 For Shipping Program
Must be purchased in full length pieces
Must be purchased in full length pieces
1-3/8”
7-3/
4”
1-3/8”
7-3/
4”
8-5/8”
6-1/4”
1”
2-3/8”
T-44 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
DEM-745
DEM-740
DEM-785-L (Left)DEM-785-R (Right)
DEM-783-L (Left)DEM-783-R (Right)
DEM-780-L (Left)DEM-780-R (Right)
DEM-733
DEM-394Length: 96”
Design Repeat: 1-1/2”
DEM-396Length: 96”
Door Surrounds & AccessoriesDoor Surrounds & Accessories CLICK PART# TO VIEW PRODUCT
DEM-755DEM-765
DEM-735
FIELD SANDING REQUIRED TO USE ACCESSORIES WITH PANEL
MOULDINGS
C
A
B
DEM-760 DEM-765
6” & 9” CROSSHEADSB
A
DEM-750 DEM-755 Can expand
up to approximately
11’ using: two DEM-755 + one DEM-765
DEM-735
DEM-730
87”
ADJU
STABLE
14-1/2”
7”6-1/2”
85”
ADJU
STABLE
8-5/8”
PILASTERS
POLYURETHANE ARCHITECTURAL ELEMENTS• For Interior & Exterior Applications. • Will not split, decay, warp or rot. • Primed and ready to paint.
(When using as an exterior application, we recommend using a “UV” stabilized paint).
All dimensions are approximate. Important: See Page T-2 For Shipping Program
T-45Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Part # A B C DDEM-750 59-1/2” 63-3/4” 3” 6-1/8”DEM-755 67-3/16” 72-5/8” 4” 9”
CROSSHEADS ________________________________________________
Part # A B CWorks With Crosshead
DEM-760 7-1/8” 5-3/4” 3-15/16” DEM-750DEM-765 11-7/16” 8-1/4” 6” DEM-755
KEYSTONES ____________________________________________________________
Part # Description Height Width Proj.Plinth Height
DEM-730 Fluted Pilaster 85” 6-1/2” 2-3/4” 8-5/8”DEM-735 Raised Panel Pilaster 87” 7” 2-1/8” 14-1/2”
PILASTERS w/attached cap & adjustable plinth __________________________
Door Surrounds & AccessoriesDoor Surrounds & AccessoriesCLICK PART# TO VIEW PRODUCT
CA
SIN
GS
PLIN
THS
DEM-820 Series
ROSE
TTES
DX119 & D200
DX121 & D210
POLYURETHANE DEM & DUROPOLYMER® DX ARCHITECTURAL ELEMENTS
All dimensions are approximate. Important: See Page T-2 For Shipping Program
T-46 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
DEM-820A4-3/4” H x 4-3/4” W 1-1/8” Projection
DEM-82096” L x 4-1/2” W 3/4” Projection
DEM-820C
7-3/4” H x 4-3/4” W 1” Projection
D2003-1/4” H x 3-1/4” W 1-3/16” Projection
D2103-1/4” H x 3-1/4” W 1-3/16” Projection
DX11990-1/2” L x 3-11/16” W
7/8” Projection
D310 9-13/16” H X 3-3/4” W
1-3-16” Projection
DX12196” L x 3-3/4” W
15/16” Projection
Door / Window CasingsDoor / Window Casings CLICK PART# TO VIEW PRODUCT
37-1/2” W x 69” H
DEM-611 shown
Niche shown with centerdecorative trim.
(Accent pieces included w/Niche)
* The 3 accent pieces shown above can be placed on
the face of the frame of your choosing, allowing you to
create your own unique look.
Niche shown
without included
decorative adjustable trim pieces.
16-3/4” W x 27-1/2” H 26-1/2” W x 52” H 27-1/2” W x 48” H
Please refrain from cutting the hole for your niche until you have actual niche for exact measurements
23-1/2” W x 34” H
• No construction necessary.• As simple as hanging a picture.• Easily installed without having to cut a hole.• Pre-attached keyhole hangers.
Surface Mounted Niche Dimension Chart
No Cutting! If You Can Hang a Picture, You Can Hang a Niche!
Part # A B C D E F G H IDEM-602 15-1/4” 5-3/8” 23-3/8” 11-3/16” 3-1/2” 22-3/4” 16-3/4” 3-7/8” 3-1/2”DEM-605 23-1/2” 8” 43-1/4” 18” 6-1/8” 39” 26-3/8” 8” 9-1/4”DEM-608 23-1/2” 8” 43-1/4” 18” 6-1/8” 39” 28” 4” 6-1/4”DEM-611 35-1/4” 12” 63-5/8” 27-5/8” 11” 58” 37-1/2” 3-3/4” 5-3/8”
Part # A B C D E F G H IDEM-635 21-1/8” 19-1/4” 13-3/4” 28-5/8” 34” 2-1/2” 5-7/8” 4-3/8” 23-1/2”
H
GAI
BC
FE
D
G
HI
A
C
BF
ED
POLYURETHANE ARCHITECTURAL ELEMENTS
All dimensions are approximate. Important: See Page T-2 For Shipping Program
T-47Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
* DEM-611
DEM-602 DEM-608DEM-605
DEM-635
Recessed NichesRecessed Niches
Surface Mounted NicheSurface Mounted Niche
CLICK PART# TO VIEW PRODUCT
T-48 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com
CLICKHERE
Visit Our NEWOnline Website
CLICK PART# TO VIEW PRODUCT
Flexible Mouldings
Cornice Mouldings
All the decorative elements in the ORAC DECOR Collection are produced in high densitypolyurethane, primed white. This material is extremely durable and easy to work with. It is tough, dimensionally stable, lightweight and easy to install using common woodworking tools and the Orac Decor adhesives. Adding elements from the ORAC DECOR Collection will enhance any new construction, renovation or redecoration project making a distinctive impression. The ORAC DECOR Collection offers a full range of decorative products reproduced from popular classic to contemporary designs.
Interior Mouldings & MillworkAdd A Distinctive & Classical Touch To Any Installation
Ceiling Medallions
Wall Decorations
?Did You Know...
Raised Panels
Panel Mouldings
!
Domes
Pediments
Wall Light Fixtures Library System
ColumnsPilasters
NichesWall Surrounds
!
Corbels
WARRANTY: All products are guaranteed to be free from manufacturing defects for 1 year from date of purchase when properly installed. If defects are present, warranty is limited to the replacement of defective material only. Orac Decor/We are not liable for any other costs incurred.
T-49Phone:1-800-835-4400 • Fax:1-800-835-4403
CLICKHERE
Visit Our NEWOnline Website
CLICK PART# TO VIEW PRODUCT
FOR
Orac Decor® presents a special collection of decorative interior elements created by top designer and strong-minded visionary Ulf Moritz.
“Design is experience. It is finding new ways of bringing an interior to life. That is precisely what Orac Decor® does.It plays with shapes and volumes, light and shade, patterns and dimensions. Working with Orac Decor® was a unique opportunity for me to develop my ideas. I have designed a collection of 21 decorative profiles and elements for you. These designs are for those who dare.With a little courage, you can create your own extra dimension in your interior. Now it is up to you.“
6-5/16”
10-1/16”7-7/8”
2-3/8”
7-1/2” 7-1/4”
T-50 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com
CLICKHERE
Visit Our NEWOnline Website
CorniceMouldingC370Length: 6’ 6”
CorniceMoulding
C371Length: 6’ 6”
POLYURETHANE
Ulf Moritz CollectionUlf Moritz Collection NewCLICK PART# TO VIEW PRODUCT
1-15/16”
3-1/8” 3-3/4”
2”
7-1/16”7-3/8”
5-1/2”
4-3/8”6-15/16”
T-51Phone:1-800-835-4400 • Fax:1-800-835-4403
CLICKHERE
Visit Our NEWOnline Website
CorniceMouldingC373Length: 6’ 6”
CorniceMoulding
C991Length: 6’ 6”
CorniceMoulding
C374Length: 6’ 6”
POLYURETHANE
Ulf Moritz CollectionUlf Moritz CollectionNewCLICK PART# TO VIEW PRODUCT
7-7/8”
3-1/2”
16-3/4”
13-3/4”16-3/4”
2-3/4”
2-3/4”
11” 11-3-16”
T-52 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com
CLICKHERE
Visit Our NEWOnline Website
Wall DecorG71Thick: 3/8” Wall Decor
G72Thick: 3/8”
Wall DecorG70
Thick: 1-1/16”
CorniceMouldingC372Length: 6’ 6”
POLYURETHANE
Ulf Moritz CollectionUlf Moritz Collection NewCLICK PART# TO VIEW PRODUCT
7-7/8”
7-1/16”
7-7/8”
7-1/16”
9-7/8”
9-7/8”
9-7/8”
9-7/8”
T-53Phone:1-800-835-4400 • Fax:1-800-835-4403
CLICKHERE
Visit Our NEWOnline Website
Wall DecorG73LThick: 3/8”
Wall DecorG74LThick: 3/8”
Wall DecorG74R
Thick: 3/8”
Wall DecorG73R
Thick: 3/8”
POLYURETHANE
Ulf Moritz CollectionUlf Moritz CollectionNewCLICK PART# TO VIEW PRODUCT
10-5/8”
8-1/4”
3-7/16”
1-3/4”
7-5/8”
3-7/16”
7”
3-1/8”
3-1/8”
T-54 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com
CLICKHERE
Visit Our NEWOnline Website
Wall DecorG77Thick: 11/16”
Wall DecorG78
Thick: 3/4”
Wall DecorG76
Thick: 9/16”
Wall DecorG75Thick: 1/2”
POLYURETHANE
Ulf Moritz CollectionUlf Moritz Collection NewCLICK PART# TO VIEW PRODUCT
2-15/16”
14-9/16”
23-5/8”2-15/16”
1-3/16”
4-15/16”
1-3/4”
6-7/8”
T-55Phone:1-800-835-4400 • Fax:1-800-835-4403
CLICKHERE
Visit Our NEWOnline Website
MedallionR70
Base Moulding**SX167
Length: 6’ 6”
Panel MouldingP3071
Length: 6’ 6”
Panel MouldingP3070Length: 6’ 6”
POLYURETHANE
Ulf Moritz CollectionUlf Moritz CollectionNew
**DUROPOLYMER®
CLICK PART# TO VIEW PRODUCT
HERITAGEFOR
The 6 decorative profiles and elements are inspired by rich English heritage of country houses. The deep, asymmetric curve gives the cornice an even more pronounced sense of depth for an extra-dimensional effect. Inspired by authentic design and made with the latest technology.
4-3/4”
3-7/16”5-7/8”
7-1/2”
5-1/2”9-5/16”
9-13/16”
7-1/2”12-3/8”
13-3/4”
10-3/4”17-1/2”
T-56 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com
CLICKHERE
Visit Our NEWOnline Website
CorniceMoulding
C341Length: 6’ 6”
CorniceMoulding
C342Length: 6’ 6”
CorniceMoulding
C343Length: 6’ 6”
CorniceMoulding
C344Length: 6’ 6”
POLYURETHANE
Heritage CollectionHeritage Collection NewCLICK PART# TO VIEW PRODUCT
1-1/4”
4-11/16”
P8020See Page T-70
P8020See Page T-70
P4020See Page T-70
T-57Phone:1-800-835-4400 • Fax:1-800-835-4403
CLICKHERE
Visit Our NEWOnline Website
Door FrameDX170-2300
Length: 7’6”
PlinthD330LR
Dimensions:Width: 4-15/16”Height: 6-1/4”
Projection: 1-5/8”
POLYURETHANE
Heritage CollectionHeritage CollectionNewCLICK PART# TO VIEW PRODUCT
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page T-90).**Flexible Mouldings Have
Limitations To Radius That Can Be Performed, See Page T-73 For
Important Information Regarding Flexible Applications.
Most of our cornice mouldings can be
obtained in flexible material (see page T-73).
Ask For our FREE Orac color catalog.Individual Free Samples Available.
#A910
Installations are guaranteed only when Orac Decor DecoFix adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation. Check measurement at job site before installing. We are not responsible for deviations of measurement in the catalog.
Product Notes:
Use Bristol as a buildup moulding with C200, C211, C212, C213, C302, C303, C304, C321
C305
C213
C305
C211C305
C303
C305
C321
C305
C212
C305
C304
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
9/16”
7/8”9/16”
1 15/16”
2 1/4”1 9/16”
1 9/16”
2 9/16”2”
2 3/16”
3 3/8”2 9/16”
1 3/16”
1 11/16”1 3/16”
1 3/4”
2 1/2”1 3/4”
1 15/16”
2 9/16”2 3/16”
2”
4 7/16”3 5/16”
6 1/8”
2 3/16”
1 3/8” 1 3/4”
T-58 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
BristolC305 (rigid)
WindsorC230 (rigid)FC230 (flexible**)
Small TraditionalC215 (rigid) FC215 (flexible**)
FederalC322 (rigid) FC322 (flexible**)
Art NouveauC260 (rigid) FC260 (flexible**)
Small ContemporaryC602 (rigid) FC602 (flexible**)
AmericanC200 (rigid) FC200 (flexible**)
CamdenC321 (rigid) FC321 (flexible**)
HampshireC250 (rigid) FC250 (flexible**)
Plain Cornice MouldingsPlain Cornice Mouldings CLICK PART# TO VIEW PRODUCT
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page T-90).**Flexible Mouldings Have
Limitations To Radius That Can Be Performed, See Page T-73 For
Important Information Regarding Flexible Applications.
Most of our cornice mouldings can be
obtained in flexible material (see page T-73).
Ask For our FREE Orac color catalog.Individual Free Samples Available.
#A910
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
3 1/8”
4 1/2”3 1/8”
3 1/8”
4 1/2”3 1/8”
3 15/16”
4 5/8”2 3/8”4 1/2”
5 7/16”2 15/16”
5 5/16”
5 13/16”2 3/8”
4 1/2”
10 1/8”9 1/16”
5 5/16”
8 9/16”
6 11/16”
6 1/8”
7 3/8”4 1/8”
7 11/16”
9 11/16”5 7/8”
4 5/16”
6 11/16”4 3/4”
Installations are guaranteed only when Orac Decor DecoFix adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation. Check measurement at job site before installing. We are not responsible for deviations of measurement in the catalog.
Product Notes:
T-59Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
CLICKHERE
Visit Our NEWOnline Website
Medium TraditionalC213 (rigid) FC213 (flexible**)
Small CoveC240 (rigid) FC240 (flexible**)
Sante FeC400 (rigid) Wellington
C220 (rigid) FC220 (flexible**)
WestonC331 (rigid) FC331 (flexible**) Monticello
C333 (rigid)FC333 (flexible**)
Large TraditionalC217 (rigid) FC217 (flexible**) Large Contemporary
C300 (rigid)
FairfaxC334 (rigid)FC334 (flexible**) Avalon
C332 (rigid)
Plain Cornice MouldingsPlain Cornice MouldingsCLICK PART# TO VIEW PRODUCT
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page T-90).**Flexible Mouldings Have
Limitations To Radius That Can Be Performed, See Page T-73 For
Important Information Regarding Flexible Applications.
Most of our cornice mouldings can be
obtained in flexible material (see page T-73).
Ask For our FREE Orac color catalog.Individual Free Samples Available.
#A910
4-1/2”5-11/16”
1-3/16”6-11/16”
3-15/16”6-11/16”12-3/16”
8-13/16”
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
3-3/8”4-15/16”
1-3/16”
6-11/16” 3-1/8”5-7/8”
11-7/16”
7-11/16”
FOR INDIRECT LIGHTING
*C990 can be used as a combination item with P9900 & P9901 (see pages T-68)
C902 SHOWN
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
10 1/4”
14 3/4”10 5/8”
6 5/16”
10 1/2”8 1/2”
7 7/8”
11 1/2”8 1/2”
3 15/16”
3 1/4”
2”5 1/2”
3 15/16”
Installations are guaranteed only when Orac Decor DecoFix adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation. Check measurement at job site before installing. We are not responsible for deviations of measurement in the catalog.
Product Notes:
T-60 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
Winston (for indirect lighting)C900 (rigid)
Regency ( for indirect lighting)C902 (rigid)FC902 (flexible**)
Richmond (for indirect lighting)C901 (rigid)FC901 (flexible**)
HamiltonC990 (rigid)
CarlisleC335 (rigid)
WilkshireC336 (rigid)
Plain Cornice MouldingsPlain Cornice Mouldings CLICK PART# TO VIEW PRODUCT
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page T-90).**Flexible Mouldings Have
Limitations To Radius That Can Be Performed, See Page T-73 For
Important Information Regarding Flexible Applications.
Most of our cornice mouldings can be
obtained in flexible material (see page T-73).
Ask For our FREE Orac color catalog.Individual Free Samples Available.
#A910
Design Repeat: 2-1/2”
Design Repeat: 1-7/8”
Design Repeat: 31-1/2”
Design Repeat: 7/8”
Design Repeat: 2-1/8”
Design Repeat: 1-1/2”
Design Repeat: 6-1/4”
Design Repeat: 1-7/16”
Design Repeat: 2”
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
1 3/16”
2 13/16”2 9/16”1 9/16”
3 3/8”2 15/16”
2 3/4”
5 1/2”4 3/4”
3 1/8”
5 7/8”4 15/16”
2”
4 15/16”4 1/2”
3 3/4”
5 9/16”4 1/8”
2 9/16”
6 1/16”5 1/2”
5 5/16”
7”4 1/2”
4 3/8”
6 1/4”4 1/2”
Installations are guaranteed only when Orac Decor DecoFix adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation. Check measurement at job site before installing. We are not responsible for deviations of measurement in the catalog.
Product Notes:
T-61Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
CLICKHERE
Visit Our NEWOnline Website
Small ClassicC214 (rigid) FC214 (flexible**)
Small Queen AnneC212 (rigid) FC212 (flexible**)
Old EnglishC201 (rigid) FC201 (flexible**)
SheratonC304 (rigid) FC304 (flexible**)
ThatchC402 (rigid) FC402 (flexible**)
Egg & DartC302 (rigid) FC302 (flexible**)
DelftC303 (rigid) FC303 (flexible**)
Large Queen AnneC216 (rigid) FC216 (flexible**)
Small ChippendaleC211 (rigid) FC211 (flexible**)
Decorative Cornice MouldingsDecorative Cornice MouldingsCLICK PART# TO VIEW PRODUCT
Design Repeat: 10-1/8”
Design Repeat: 4”
Design Repeat: 3-7/8”
Design Repeat: 13-7/16”
Design Repeat: 1-15/16”
Design Repeat: 1-1/2”
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
For ProductInformation see page T-61.
C307 with C-307A
“Europe’s # 1 Choice for Interior Design”
**DUROPOLYMER®
POLYURETHANE
5 1/8”
7 13/16”5 7/8”
5 1/2”
8 11/16”6 11/16”
7 11/16”
10 3/16”6 11/16”
5 1/8”
8 5/8”6 7/8”
2 3/8”
10 1/8”9 13/16”
7 1/2”
10 5/8”
7 1/2”
3 3/4”
1 9/16”C307AC307
T-62 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
FestoonC308 (rigid) FC308 (flexible**)
Large ChippendaleC422 (rigid)
Georgetown w/CorbelsC307 (rigid)
C-307A**(Corbel)
HepplewhiteC218 (rigid) FC218 (flexible**) Large Classic
C219 (rigid)
Harbor BayC301 (rigid) FC301 (flexible**)
Decorative Cornice MouldingsDecorative Cornice Mouldings CLICK PART# TO VIEW PRODUCT
“Europe’s # 1 Choice for Interior Design”
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page T-90).
7-1/16”
7-1/16”
10”
7 1⁄16”
7 1⁄16” 10”
Yields 1 inside corner
7-1/16”
7-1/16”
10”
7 1⁄16”
7 1⁄16” 10”
7-1/16”
7-1/16”
10”
7 1⁄16”
7 1⁄16” 10”
7-1/16”
7-1/16”
10”
7 1⁄16”
7 1⁄16” 10”
Crown Moulding
Inside “V” Corner Moulding
Decorative Center Moulding
Installations are guaranteed only when Orac Decor DecoFix adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation. Check measurement at job site before installing. We are not responsible for deviations of measurement in the catalog.
Product Notes:
T-63Phone:1-800-835-4400 • Fax:1-800-835-4403
CLICKHERE
Visit Our NEWOnline Website
C338.Length: 6’ 6”
C338BLength: 6’ 6”
C338ALength: 6’ 6”
Combination MouldingsCombination Mouldings
POLYURETHANE
NewCLICK PART# TO VIEW PRODUCT
6-7/8”
3-1/8”
6-11/16”
2-15/16”
4-3/8”
3”
5-1/2”
3”
2”
2”
Lengths: 6’ 6” Lengths: 6’ 6” Lengths: 6’ 6”
Lengths: 6’ 6” Lengths: 6’ 6”
T-64 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com CATALOG IS PRICED CATALOG IS PRICED IN U.S. DOLLARSIN U.S. DOLLARSDue to raw material cost fluctuations, prices are subject to change.
C351
C358 C361
C352 C357
Mouldings For Indirect LightingMouldings For Indirect Lighting
POLYURETHANE
NewCLICK PART#
TO VIEW PRODUCT
2”
2”
3-1/8”
5-1/2”Lengths: 6’ 6” Lengths: 6’ 6”
2-3/8”
7-1/2”Lengths: 6’ 6”
T-65Phone:1-800-835-4400 • Fax:1-800-835-4403Due to raw material cost fluctuations, prices are subject to change.
C362 C364C371
Mouldings For Indirect LightingMouldings For Indirect Lighting
POLYURETHANE
NewCLICK PART#
TO VIEW PRODUCT
6-11/16”
5-11/16”
5-7/8”
4-15/16”
3-15/16”
4-15/16”
Lengths: 6’ 6” Lengths: 6’ 6” Lengths: 6’ 6”
2-3/4”
11”
Lengths: 6’ 6” Lengths: 94-1/2” 6-1/2”
5-3/4”
T-66 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com CATALOG IS PRICED CATALOG IS PRICED IN U.S. DOLLARSIN U.S. DOLLARSDue to raw material cost fluctuations, prices are subject to change.
C372
C902 DEM-272
C900 C901
Mouldings For Indirect LightingMouldings For Indirect Lighting
POLYURETHANE
NewCLICK PART#
TO VIEW PRODUCT
Drill Hole Into Channel & Mount To Wall With Screws
Install 120V Ribbon In Channel and Place On Moulding Shelf
Install 120V RibbonInto Channel
Install 120V Ribbon Directly in Trough without ChannelOR
1/2”
1/4”
LED Ribbon Mounting Channels
Mounting 120V Ribbon To Wall
120V Ribbon Flex 120V RGB Ribbon FlexOther LED lighting options with higher luminous flux output are available. See Pages R-3~4
Mounting 120V Ribbon To Our Moulding
Material: Clear anodized aluminum base for clean straight lines
PRODUCT FEATURES:Install LED Ribbon with ease!
These new channels can be incorporated into a variety of applications
Accessories (Optional)
Mounting Options
Other Lighting Options
Up To 320 Lumens Per Foot2835 Chip 140 pcs/meter
(Part # MXL140-28-* see pg. R-4)
Up To 190 Lumens Per Foot5050 Chip 60 pcs/meter
T-67Phone:1-800-835-4400 • Fax:1-800-835-4403Due to raw material cost fluctuations, prices are subject to change.
Part #OverallHeight Length
L-TASK-11 1/4” 8 ft.
Mouldings For Indirect LightingMouldings For Indirect Lighting
POLYURETHANE
NewCLICK PART#
TO VIEW PRODUCT
Design Repeat: none
Design Repeat: none
Design Repeat: none
Design Repeat: none
Design Repeat: none
P-5020B3-9/16”x3-9/16”x1/2” D
Design Repeat: none
Design Repeat: none
Design Repeat: none
Design Repeat: none
P-5020A3-9/16”x3-9/16”x1/2” D
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
Design Repeat: none
Design Repeat: none
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
9/16”
1”
1”
1 15/16”
13/16”
2 15/16”
9/16”
3 9/16”
13/16”
3 15/16”
3/8”
1 3/16”
9/16”
2 3/4”
3/8”
3 1/8”
13/16”
3 3/4”
1 3/16”
3 9/16”
1 13/16”
4 3/4”
Installations are guaranteed only when Orac Decor DecoFix adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation. Check measurement at job site before installing. We are not responsible for deviations of measurement in the catalog.
Product Notes:
T-68 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
YorkshireP8050 (rigid) FP8050 (flexible**)
SuttonP9050 (rigid)FP9050 (flexible**) Small Weave
P5021 (rigid)FP5021 (flexible**)
EssexP9040 (rigid)FP9040 (flexible**) Providence
P9901FP9901
WeaveP5020 (rigid)FP5020 (flexible**)
P-5020A P-5020B
ChathamP9020 (rigid)FP9020 (flexible**)
HamptonP9010 (rigid) FP9010 (flexible**)
ChesterfieldP8040 (rigid) FP8040 (flexible**)
ContemporaryP7070 (rigid)FP7070 (flexible**) Brunswick
P9900 (rigid)FP9900 (flexible**)
Panel Mouldings / AccessoriesPanel Mouldings / Accessories CLICK PART# TO VIEW PRODUCT
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
1 3/16”
2 9/16”
1”
2 3/16”
1”
3 1/8”
13/16”
4 1/8”
13/16”
8 11/16”
13/16”
2 3/4”
9/16”
3 3/8”
13/16”
4 5/16”
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page T-90).**Flexible Mouldings Have
Limitations To Radius That Can Be Performed, See Page T-73 For
Important Information Regarding Flexible Applications.
Most of our cornice mouldings can be
obtained in flexible material (see page T-73).
1 3/16”
2 3/8”
Installations are guaranteed only when Orac Decor DecoFix adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation. Check measurement at job site before installing. We are not responsible for deviations of measurement in the catalog.
Product Notes:
T-69Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
CLICKHERE
Visit Our NEWOnline Website
SheratonP7040 (rigid)FP7040 (flexible**)
Design Repeat: 7/8”
EllingtonP7080 (rigid)
Design Repeat: 15-3/4”
ChippendaleP6020 (rigid)FP6020 (flexible**)
Design Repeat: 3/4"
Harbor BayP7050 (rigid)FP7050 (flexible**)
Design Repeat: 3-1/8”
Victorian BraidP7010 (rigid)FP7010 (flexible**)
Design Repeat: 9-13/16”
ClassicP3020 (rigid)FP3020 (flexible**)Design Repeat: 3-1/8”
Greek KeyP7060 (rigid)FP7060 (flexible**)
Design Repeat: 2-1/2”
Queen AnneP7030 (rigid)FP7030 (flexible**)
Design Repeat: 1-1/2”
DelftP7020 (rigid)FP7020 (flexible**)
Design Repeat: 6-1/4"
P3020A16-3/4”H x 16-3/4” x 1-3/16”
New
Panel Mouldings / AccessoriesPanel Mouldings / AccessoriesCLICK PART# TO VIEW PRODUCT
**P-8030C7-1/2"x2-3/16"x9/16"
**P8030D5-1/8"x5-1/8"x9/16"
All Curves have an Inside Radius approximately 5"
**P-801C7-7/8"x3-3/8"x1"
All Curves have an Inside Radius approximately 5"
All Curves have an Inside Radius approximately 5"
**P-4020A6-1/2" x2-3/4" x 1-3/16"
P-202-9/16"Dia. x3/8"
P-101A9-13/16"x 9-13/16"x1"
P-212-9/16"x2-9/16"x3/8"
P-201A7-5/8"x 7-5/8"x1"
P2020P-201AP-21
P1020, P8030
LENGTHS 6’6” MEASUREMENTS ARE APPROXIMATE
“Europe’s # 1 Choice for Interior Design”
**DUROPOLYMER®
POLYURETHANE
9/16”
1 9/16” 1 3/16”
1 15/16”
1”
1 15/16”
1”
2 3/8”
1”
1 3/4”
T-70 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
Small AmericannaP8030 (rigid)FP8030 (flexible**)
Design Repeat: none
P-8030CP-8030D
Large AmericannaP8020 (rigid) FP8020 (flexible**)
Design Repeat: none
P-801C
WellingtonP4020 (rigid)FP4020 (flexible**)
Design Repeat: none
P-4020A
VictorianP1020 (rigid) FP1020 (flexible**)
Design Repeat: 2-3/8"
P-20P-101A
American ColonialP2020 (rigid)
FP2020 (flexible**)
Design Repeat: 3-1/2"
P-21P-201A
Panel Mouldings /AccessoriesPanel Mouldings /Accessories CLICK PART# TO VIEW PRODUCT
P-801C
P8020
Endless Possibilities
E urope’s # 1 Choice for Interior Design
T-71Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
CLICKHERE
Visit Our NEWOnline Website
CLICK PART# TO VIEW PRODUCT
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Note: Please refrain from cutting the hole for your niche until you have the actual niche for exact measurements.
All 400 & 500 series niches come with a translucent shelf for uplighting -( L I G H T & H A R D WA R E N OT INCLUDED).
N404N410
=+
N404, N410
N504 N510
=+
N504, N510
=+
N503N520
N503,N510
?Did You Know...Part # A B C D EN404 16-9/16" 29-15/16" 4-5/16" 21-5/8" 9-5/8"N503 27-3/16" 44-5/16" 4-5/16" 37-3/16" 20-1/4"N504 27-3/16" 44-1/2" 4-5/16" 37-3/16" 19-1/2"Part # F G H I JN410 12-3/16" 23-7/16" 3-3/4" 23-1/16" 11"N510 22-5/8" 38-3/4" 7-1/16" 37-13/16" 20-7/8"N520 21-5/16" 38-3/8" 7-1/16" 36-1/4" 20-7/8"
Ask For our FREE Orac color catalog.
#A910
MEASUREMENTS ARE APPROXIMATE
T-72 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
NichesNiches CLICK PART# TO VIEW PRODUCT
FC & FP Series = Available in Straight 6’6” LengthsSX Series = Available in Straight 8’ Lengths
Our “Bend To Fit”, straight flex is stocked in 6’6” lengths ready for immediate shipping. This lightweight polymer is capable of moderate radii (see chart below) to suit most applications.
NOTE: Flexible mouldings may vary slightly in size (more on
larger profiles) compared to rigid straight mouldings.
NOT RECOMMENDED FOR INDIRECT LIGHTING APPLICATIONS
Inside Radius
Outside Radius
Arch Radius
Part #Profile
“Bend To Fit”Min.
InsideRadius
Min.OutsideRadius
Min.Arch
RadiusFLEXIBLE CORNICE MOULDINGS
FC200 5’ 5’ N/AFC201 4’6” 4’6” N/AFC211 10’6” 10’6” N/AFC212 4’6” 4’6” N/AFC213 7’6” 7’6” N/AFC214 3’6” 3’6” N/AFC215 5’6” 5’6” N/AFC216 11’ 11’ N/AFC217 11’ 11’ N/AFC218 12’ 12’ N/AFC220 9’6” 9’6” N/AFC230 3’6” 3’6” N/AFC240 7’6” 7’6” N/AFC250 3’6” 3’6” N/AFC260 5’ 5’ N/AFC301 9’6” 9’6” N/AFC302 6’6” 6’6” N/AFC303 6’ 6’ N/AFC304 5’6” 5’6” N/AFC308 4’6” 4’6” N/AFC321 4’6” 4’6” N/AFC322 4’ 4’ N/AFC331 15’ 15’ 6’FC333 12’ 12’ N/AFC334 13’6” 13’6” N/AFC402 6’ 6’ N/AFC602 4’6” 4’6” 6’FC901 12’ 12’ N/AFC902 13’ 13’ N/A
Part #Profile
“Bend To Fit”Min.
InsideRadius
Min.OutsideRadius
Min.Arch
RadiusFLEXIBLE PANEL MOULDINGS
FP1020 1’ 1’ 2’6”FP2020 1’ 1’ 2’6”FP3020 3’ 3” 6’FP4020 3’ 3’ 3’FP5020 1’6” 1’6” 9’FP5021 1’ 1’ 2’6”FP6020 1’6” 1’6” 5’FP7010 1’ 1’ 10’FP7020 1’ 1’ 9’6”FP7030 1’ 1’ 5’FP7040 1’6” 1’6” 6’FP7050 1’6” 1’6” 5’FP7060 5” 5” 6’FP7070 1’6” 1’6” 9’FP8020 1’6” 1’6” 4’6”FP8030 1’ 1’ 2’FP8040 1’ 1’ 9’6”FP8050 1’ 1’ 9’FP8060 1’ 1’ 10’FP9010 1’6” 1’6” 8’6”FP9020 1’6” 1’6” 9’FP9040 1’6” 1’6” 3’FP9050 1’ 1’ 2’6”FP9900 1’6” 1’6” 6’FP9901 1’6” 1’6” 6’
FLEXIBLE BASE MOULDINGSSX105F 1’6” 1’6” N/ASX118F 1’6” 1’6” N/ASX155F 1’6” 1’6” N/A
?Did You Know... #A910 Ask For our FREE Orac color catalog. Individual FREE Samples Available.
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Above radii are the tightest curves capable without deformation of profileand excessive stress on mounting surfaces. We assume no responsibility for material when recommended radii is exceeded. It is best to paint mouldingsafter installation. See flexible installation page for proper installation procedures.
T-73Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
CLICKHERE
Visit Our NEWOnline Website
Flexible MouldingsFlexible MouldingsCLICK PART# TO VIEW PRODUCT
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
D3103-3/4"W x9-13/16"H x 1-3/16"D
P90206'6"H
D2103-3/4"Wx 3-3/4"Hx 1-3/8"D
K201 5-7/8"H
K20224-1/4"H
K200 6'6"H K250
6'6"H
K25114"H
K2535-5/16” H
(Use with the K250 & K254)
D120,K201,K200
K254 20-7/8" H
MEASUREMENTS ARE APPROXIMATE
?Did You Know...Don’t Forget...Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page T-90).
#A910 Ask For our FREE Orac color catalog. Individual FREE Samples Available.
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
5 5/16”
13/16” 10 5/8”
1”
13/16”
3 3/4”
6 5/16”24 1/4” H
7 5/16”
1 9/16” 11 13/16”20 7/8” H
15 3/8”
2 3/4”
18 1/2”5 5/16” H
2 9/16”
10 13/16”
14 3/16”
16 15/16”14” H
3 9/16”
11”
9 1/16”5 7/8” H
2 3/8”
5 1/2”
T-74 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
PilastersPilasters CLICK PART# TO VIEW PRODUCT
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
K25420-7/8” H
K2406’6” H
K2416-1/2” H
K25521-1/4” H
K2206’6” H
K2218-11/16” H
K2238-7/8” H
( Use with the K220 & K255)
K221,K220
K223,K220
MEASUREMENTS ARE APPROXIMATE
?Did You Know...Don’t Forget...Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page T-90).
#A910 Ask For our FREE Orac color catalog.
Individual FREE Samples Available.
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
15 3/4”6 1/2” H
10 5/8”
2 15/16”
13 3/8”8 11/16” H
3 3/4”
7 11/16”
13 3/4”8 7/8” H
3 15/16”
7 7/8”
11 7/16”
1 3/16”
7 11/16”
13/16”
11 13/16”20 7/8” H
15 3/8”
2 3/4”
8 11/16”21 1/4” H
9 5/8”
1 9/16”
T-75Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
CLICKHERE
Visit Our NEWOnline Website
PilastersPilastersCLICK PART# TO VIEW PRODUCT
**DUROPOLYMER®
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
K1001,K1151
K1001,K1151
** K1111 11-3/16"H
** K1121 11-5/8"H
** K1151 4-3/4"H
K113122-7/16"H
K10016'6"H
K11016'6"H
K115
1K1
001
K112
1
K115
1K1
001
K111
1
K115
1K1
001
K114
1
K115
1K1
101
K112
1
K115
1K1
101
K111
1
K115
1K1
101
K114
1
Mix & Match!
K1121,K1101
?Did You Know...
MEASUREMENTS ARE APPROXIMATE
#A910
Ask For our FREE Orac color catalog. Individual FREE Samples Available.
DO NOT CUT COLUMNS. All height adjustments are to be
made by cutting plinth base.
14”
9 1/16”
7 5/
8”
11 5/8” H
14 3/8”
7 5/
16”
11 13/16” H
9 1/16”
8 11/16”78” H
4 5/
16”
5 11/16”
8 11/16”78” H
5 1/2”
4 5/
16”
12 5/8”4 3/4” H
8 7/8”
6 5/
16”
13 3/4”22 7/16” H
9 1/4”
6 7/
8”
T-76 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
Contemporary Half ColumnsContemporary Half Columns CLICK PART# TO VIEW PRODUCT
**DUROPOLYMER®
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
K1102,K1152
**K31114-15/16"H
K21317-7/8"H
**K51416-5/16"H
K315122-5/8"H
Mix & Match!
K32017’10-1/2"H
Can achieve overall height of approximately 10’-3-1/4” if used with K3151 & K5141
?Did You Know...
MEASUREMENTS ARE APPROXIMATE
K213
1K3
201
K311
1
K213
1K3
201
K514
1
#A910
Ask For our FREE Orac color catalog. Individual FREE Samples Available.
16 5/16”
8 1/4
”
4 15/16” H
11 1/4”
17 11/16”
8 7/
8”
6 5/16” H
11 3/8”7 1/2”
13 3/16”94 1/2” H
10 5/8”6
1/2”
8 7/16”
16 15/16”7 7/8” H
12 1/8”
8 7/
16”
17 15/16”
8 7/
8”
22 5/8” H
12 5/8”
T-77Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
CLICKHERE
Visit Our NEWOnline Website
Classical Half ColumnsClassical Half ColumnsCLICK PART# TO VIEW PRODUCT
**DUROPOLYMER®
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
K1142,K1102
K1122
** K1152 4-3/4"H
K11026'6"H
K10026'6"H
** K1112 11-13/16"H
** K1122 11-5/8"H
** K1142 4-15/16"H
Mix & Match!K1
152
K100
2
K115
2K1
002
K112
2
K111
2
K115
2K1
002
K114
2
K115
2K1
102
K112
2
K115
2K1
102
K111
2
K115
2K1
102
K114
2
?Did You Know...
MEASUREMENTS ARE APPROXIMATE
K113222-7/16"H
#A910
Ask For our FREE Orac color catalog. Individual FREE Samples Available.
13 3/4”
13 3/
4”
4 15/16” H
9 7/16”
14”
9 1/16”
14”
11 5/8” H14 3/8”
14 3/
8”
11 13/16” H
9 1/16”
8 11/16”78” H
8 11/16”78” H
13 3/4”22 7/16” H
9 1/4”
13 3/
4”
12 5/8”4 3/4” H
8 7/8”
T-78 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
Contemporary Whole ColumnsContemporary Whole Columns CLICK PART# TO VIEW PRODUCT
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
**DUROPOLYMER®Mix & Match!
K1102,K1152
K1122,K1002,K1152
K21327-7/8"H
** K3112 4-15/16"H
K315222-5/8"H
< K3102 6'6"H
** K5142 6-5/16"H
K3202 >7'10-1/2"H
Can achieve overall height of approximately 10’-3-1/4” if used with K5142 & K3152
?Did You Know...
MEASUREMENTS ARE APPROXIMATE
K213
2 K
3202
K31
12
K213
2
K310
2
K
3112
K213
2
K31
02
K51
42
K213
2
K32
02
K51
42
#A910
Ask For our FREE Orac color catalog. Individual FREE Samples Available.
16 5/16”
16 5/
16”
4 15/16” H
11 1/4”
17 11/16”
17 11
/16”
6 5/16” H
11 7/16”
12”78” H
10 13/16”
13 3/16”94 1/2” H
10 5/8”
16 15/16”7 7/8” H
12 1/8”
17 15/16”
17 15
/16”
22 5/8” H
12 5/8”
7 1/2”
T-79Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
CLICKHERE
Visit Our NEWOnline Website
Classical Whole ColumnsClassical Whole ColumnsCLICK PART# TO VIEW PRODUCT
E urope’s # 1 Choice for Interior Design
T-80 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
CLICK PART# TO VIEW PRODUCT
**DUROPOLYMER®
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
MEASUREMENTS ARE APPROXIMATE
9-13/16”
5-3/8”
6’6”
K200
K201L/R
D320
?Did You Know... #A910 Ask For our FREE Orac color catalog. Individual FREE Samples Available.
3 3/8”
4 1/2
”
1 3/4”
1 3/16”
3 9/16”
27 3/16”
47 1/4”
Shown:M9010LM9010AM9010RM9010BP9010
15 9/16”
25 3/16”
Shown:M9010LM9010AM9010RP9010
Shown:M9010LM9010AM9010RM9010CP9010
Shown:M9010LM9010BM9010RP9010
5 5/16”
13/16”
5 5/16”1”
9 13/16” H
9 1/16”5 7/8” H
2 3/8”
5 7/8”
5 1/2”
T-81Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
CLICKHERE
Visit Our NEWOnline Website
D3003-3/4”W x10-1/4”H x 1-9/16”D
** M9010L 25-3/8”W x 12-5/8”H x
1-3/16”D ** M9010R 25-3/8”W x 12-5/8”H x
1-3/16”D
** M9010A
M9010B4-15/16”W x1-15/16”H x 1-15/16”D M9010C
8-7/8”W x1-15/16”H x 1-15/16”D
P90103-9/16”W x6’6”H x 1-3/16”D
K201L/RD320
K200
Library Facade SystemLibrary Facade System
Decorative Door SurroundsDecorative Door Surrounds
CLICK PART# TO VIEW PRODUCT
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
R-1413-3/16" DIA.
R-1311-1/4" DIA.
R-0710-1/4" DIA.
R-105-7/8" DIA.
R-117-1/2" DIA.
R-127-7/8" DIA.
R-358-11/16" DIA.
Our medallions are specially designed with a solid core for ornamental plaque use. However, all medallions can be cut with a hole cutter or keyhole saw to accommodate lighting or ceiling fans.
R-5012-5/8" DIA. R-08
14-15/16" DIA.
R-12
?Did You Know...Don’t Forget...
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page T-90).
SEE PAGE S-34FOR OUR
CHANDELIER LIGHT LIFT
MEASUREMENTS ARE APPROXIMATE
R-6115-3/4" DIA.
R-3115-3/16" DIA.
Ask For our FREE Orac color catalog. Individual FREE Samples Available. #A910
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
T-82 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
Ceiling MedallionsCeiling Medallions CLICK PART# TO VIEW PRODUCT
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
R-0919-1/8" DIA.
R-2231-5/16" x 20-5/8"
R-1819-5/16" DIA.
R-4621-1/16" DIA.
SEE PAGE S-34FOR OUR
CHANDELIER LIGHT LIFT
R-18
MEASUREMENTS ARE APPROXIMATE
R-1718-5/16" DIA.
R-1617-11/16" DIA.
?Did You Know...Don’t Forget...
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page T-90).
Ask For our FREE Orac color catalog. Individual FREE Samples Available. #A910
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
Our medallions are specially designed with a solid core for ornamental plaque use. However, all medallions can be cut with a hole cutter or keyhole saw to accommodate lighting or ceiling fans.
T-83Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
CLICKHERE
Visit Our NEWOnline Website
Ceiling MedallionsCeiling MedallionsCLICK PART# TO VIEW PRODUCT
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
R-6621-7/16"O.D16-15/16"I.D.
R-7624-7/16” DIA.
R-2826-15/16" DIA.
R-7724-7/16” DIA.
R-40
MEASUREMENTS ARE APPROXIMATE
R-5227-3/8" DIA.
R-2328-1/8" DIA.
R-7327-9/16" DIA.
?Did You Know...Don’t Forget...
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page T-90).
SEE PAGE S-34FOR OUR
CHANDELIER LIGHT LIFT
RIMONLY
Ask For our FREE Orac color catalog. Individual FREE Samples Available. #A910
Our medallions are specially designed with a solid core for ornamental plaque use. However, all medallions can be cut with a hole cutter or keyhole saw to accommodate lighting or ceiling fans.
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
T-84 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
Ceiling MedallionsCeiling Medallions CLICK PART# TO VIEW PRODUCT
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
R-2431-1/8" DIA.
R-6437-5/8" DIA.
R-38
R-3827-15/16" DIA.
R-4029-5/16" DIA.
R-2729-1/2" DIA.
?Did You Know...Don’t Forget...
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page T-90).
SEE PAGE S-34FOR OUR
CHANDELIER LIGHT LIFT
Ask For our FREE Orac color catalog. Individual FREE Samples Available. #A910
MEASUREMENTS ARE APPROXIMATE
Our medallions are specially designed with a solid core for ornamental plaque use. However, all medallions can be cut with a hole cutter or keyhole saw to accommodate lighting or ceiling fans.
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
T-85Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
CLICKHERE
Visit Our NEWOnline Website
Ceiling MedallionsCeiling MedallionsCLICK PART# TO VIEW PRODUCT
“Europe’s # 1 Choice for Interior Design”
D102, D62,D1010, P9010, D300
**DUROPOLYMER®
POLYURETHANE
D62
P9010
**D300
P9020
**D210
**D200
**D1014
D400
D401
D402 D401D4022-3/4"
4-3/4"
5-11/16"
MEASUREMENTS ARE APPROXIMATE
SINGLE DOOR SURROUNDSOPENING: Minimum 26-3/4" Wide Maximum 41-5/16" Wide
DOUBLE DOOR SURROUNDSOPENING: Minimum 53-1/8" Wide Maximum 73-5/8" Wide
ACCESSORIES FORSINGLE & DOUBLE
DOOR SURROUNDS
**D310?Did You Know...
1 3/16”
3 9/16”
13/16”
3 3/4”
T-86 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
Part # W H DP9010 3-9/16" 6'6" 1-3/16"P9020 3-3/4" 6'6" 3/4"D300 3-3/4" 10-1/4" 1-9/16"D310 3-3/4" 9-13/16" 1-3/16"D400 50-3/16" 5-11/16" 2-3/16"D401 50-3/16" 5-11/16" 2-3/16"D402 4-3/4" 5-11/16" 2-3/8"
Part # W H DP9010 3-9/16" 6'6" 1-3/16"P9020 3-3/4" 6'6" 3/4"D300 3-3/4" 10-1/4" 1-9/16"D310 3-3/4" 9-13/16" 1-3/16"
Part # W H DD200 3-3/4" 3-3/4" 1-3/16"D210 3-3/4" 3-3/4" 1-3/8"D62 6-1/8" 4-1/2" 9/16"
D1014 13" 5-1/8" 9/16"
Door SurroundsDoor Surrounds CLICK PART# TO VIEW PRODUCT
“Europe’s # 1 Choice for Interior Design”
**DUROPOLYMER®
POLYURETHANE
MEASUREMENTS ARE APPROXIMATE
D503
PX147 & PX169
This range consists of different panels and a plinth that can be combined to give ordinary doors and walls thatclassical look of raised panels
?Did You Know... Don’t Forget...
Use ORAC FIXExtra andORAC DecoFix Profor perfect installation (see page T-90).
#A910Ask For our FREE Orac color catalog.
When using PX169 & PX147, you can useOrac Decor Skirting/ Base Moulding SX165, See Page T-35
3/8”
6-11/16”3⁄8”
6 11⁄16”
T-87Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
CLICKHERE
Visit Our NEWOnline Website
D507:21-5/8” W x 35-5/8” H x 9/16” D**
PX1476-11/16” H x 3/8” D x 6'6” L**
D50421-5/8” W x 8-5/8" H x 9/16” D**
** PX1692-3/16" H x 1-3/8” D x 6'6" L
D50616-15/16” W x 16-15/16” H x 9/16” D**
D50321-5/8" W x 21-5/8" H 9/16" D**
** D50021-5/8” W x 29-1/2” H x 9/16” D
Raised PanelsRaised Panels
New
New
CLICK PART# TO VIEW PRODUCT
**DUROPOLYMER®
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
Check measurements at job site before installing. We are not responsible for deviations of measurements in the catalog.
** G40 6-11/16" W x 5½" H x 9/16" D - 3/4" at neck
* * G42 15-3/4" W x 1-3/4" H x 9/16" D
G5021-1/4" W x15-3/8" H x1-3/16" D G51
28-15/16" W x 3-3/4" H x 1-3/16" D
D120
D140
D150
D161
D170
B-41735-5/8" W x 5-5/16" Hx 5-1/2" D
A
B
DC
D161
MEASUREMENTS ARE APPROXIMATE
?Did You Know...Don’t Forget...
Use ORAC FIX Extra and ORAC DecoFix Pro for perfect installation (see page T-90).
#A910
Ask For our FREE Orac color catalog. Individual FREE Samples Available.
T-88 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
CLICKHERE
Visit Our NEWOnline Website
Part # A B C DD120 48-13/16" 9-13/16" 3-9/16" 43-1/2"D140 39" 12-5/8" 13/16" -D150 39-9/16" 6-1/8" 9/16" -D161 36-1/4" 8-7/16" 1-9/16" -D170 41-5/16" 9-13/16" 1-3/8" -
Wall Decorations & ShelvesWall Decorations & Shelves
PedimentsPediments
CLICK PART# TO VIEW PRODUCT
“Europe’s # 1 Choice for Interior Design”
POLYURETHANE
MEASUREMENTS ARE APPROXIMATE
B-401
B-403
B-402
B-410
B-413
B-404
B-408
B-403
THESE FIXTURES ACCEPT A STANDARD BASE BULB UP TO 60 WATTS
L-501
L-506
L-504L-505
L-512L-509
L-506
?Did You Know... #A910 Ask For our FREE Orac color catalog. Individual FREE Samples Available.
T-89Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
CLICKHERE
Visit Our NEWOnline Website
Part # A B CB-401 4-1/2" 6-1/8" 2-3/4"B-402 3-9/16" 8-11/16" 2-3/4"B-403 7-1/2" 7-1/2" 3-15/16"B-404 7-11/16" 12-3/8" 4-9/16"B-408 8-7/8" 15-3/4" 5-1/8"B-410 7-11/16" 19-11/16" 6-5/16"B-413 6-5/16" 8-7/8" 3-3/8"
Part # A B CL-501 13-3/4" 8-11/16" 6-5/16"L-504 12" 5-7/8" 5-7/8"L-505 16-1/8" 4-1/2" 6-1/2"L-506 15-3/8" 6-1/8" 7-1/2"L-509 11-7/16" 6-11/16" 5-11/16"L-512 12" 4-15/16" 6-1/8"
CorbelsCorbels
Wall Light SconcesWall Light Sconces
CLICK PART# TO VIEW PRODUCT
MITER BOXES CAN BE USED FOR ORAC DECOR & SURROUNDS MOULDINGS
ADHESIVE/FILLER YIELDS
ADHESIVES
FX-200
FX-210
MITER BOXES
FDP-500
FDP-600
ORAC FIX, ORAC DECOFIX PRO & ORAC DECOFIX HYDROTechnical Information
Keep ORAC Fix or ORACDecoFix Pro, cool (between +5°C/41°F and +30°C/86°F) and dry, can be stored for 12 months in original, unopened package
We highly recommend testing your finish on a sample or scrap piece before installing.
FB-13 -Miter BoxDecofix PRO• For mounting elements within the Polyurethane & Duropolymer
Collection.• Basixx uses DecofixPro for Mounting & Joints
ORAC Fix Extra • For joining elements within the Polyurethane &
Duropolymer Collection in any application.
FDP-700
ADJUSTABLE MITER BOX & SAW KIT
FB-14 -SawFB-300 -Miter Box
Yields are approximate & based on average conditions & installation techniques.
?Did You Know...
Additional features for easy fixation and handling.Moulding Max. Ht. 10.83" & Width 8.86" (for 45 degree)
Cuts Any Degree
Mldg. #
StandardPlus
CartridgeFDP-500
StandardPlusTub
FDP-600
ExtraAdhesiveCartridge
FX-200
ExtraAdhesive
TubeFX-210
P1020, P2020, P3020, P5021, P6020, P7050, P8020, P8030, P9040, P9050,
C215, C230, C240, C250, C260, C322,C602
60 ft. 400 ft.150
joints35
joints
P4020, P5020, P5051, P7010, P7020, P7030, P7040, P7060, P7070, P8040, P8050, P8060, P9010, P9020, P9900,
P9901, C200, C201, C212, C213, C214,C220, C302, C303, C304, C305,
C308, C321,C400
45 ft. 300 ft.100
joints25
joints
P5050, P7080, C211, C216, C217, C218, C219, C300, C301, C307, C331, C332, C333, C334, C335, C336, C351, C353, C354, C355, C356, C357, C358,
C360, C402, C422, C900, C901, C902, C990
30 ft. 200 ft.80
joints20
jointsProductRemovable
WithOpenTime Base Temp. Prep.
ORAC FIX EXTRA JOINT
ADHESIVE
AcetoneBefore
Hardening
Approx.30 min.
Polyurethane(Diphenylmethane 4,4
- diisocyanate)
Between 5°C/41°F and
30°C/86°FORAC
DECOFIX PRO
WaterBefore
Hardening
Approx.15 min.
Synthetic copolymer dispersion
Between 5°C/41°F and
30°C/86°F
ORACDECOFIX HYDRO
Water and 1% Soap
Before Hardening
Approx.10 min.
One componentAdh/Sealant Base On
MS Polymer
Between 5°C/41°F and
30°C/86°F
• For mounting elements within the Polyurethane & Duropolymer Collection.
• Basixx uses Hydro Fix for Mounting & Joints
Decofix POWER ultra strong adhesives for specified heavier profiles, exterior, humid areas & non-porous surfaces.
Installations are guaranteed only when Orac Decor DecoFix adhesives are used properly. Ordinary adhesives do not provide the strength needed to prevent joint separation. Check measurement at job site before installing. We are not responsible for deviations of measurement in the catalog.
Product Notes:
T-90 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com
CLICKHERE
Visit Our NEWOnline Website
Part #Pcs. Per Carton Description
FDP-700 12Cartridge-290 ml
(9-3/4 oz.)
Part #Pcs. Per Carton Description
FX-200 12Cartridge-310 ml
(10-1/2 oz.)
FX-210 24Tube-80 ml(2-3/4 oz.)
Part # Pcs. Per Carton Max. Width & Height Of Mldg.FB-300 1 Width & Height 10.83"FB-13 1 Width - 6.10" & Height - 4.92" FB-14 1 ----
Part #Pcs. Per Carton Description
FDP-500 12Cartridge- 310 ml
(10-1/2 oz.)FDP-600 1 Tub- 8.8 lbs.
FB-10 1 pc per carton
Adhesive & Miter BoxAdhesive & Miter Box CLICK PART# TO VIEW PRODUCT
Interior Millwork by Focal Point
T-91Phone:1-800-835-4400 • Fax:1-800-835-4403
Full LineMaster
Distributor
Full LineMaster
DistributorClick To View
We are a full line master distributor of Focal Point.To view and purchase online go to www.outwater.com Go to pg. T-91
A printed copy of the A printed copy of the catalog is available, catalog is available, FREE OF CHARGE. FREE OF CHARGE. Please call & request Please call & request FP12
CLICK PART# TO VIEW PRODUCT
Memorable Mouldings guide the eye and stir the spirit. They can elevate a room from mundane to marvelous!
Athenian Leaves
Classic Egg & Dart
2313523145
Zoller Cove
112901118011280
St. James
1127011170
Georgian
1132011040
Monte Carlo
Egg & Dart Crown
10530-8
10700-8
Versailles Crown
10750
Profile Key
Repeat (R)Face (F)
Height (H)
Projection (P)
Length (L) of 1 piece of moulding.Our moulding is typically made in 6'6", 8' or 12' lengths.( Lengths may vary slightly due to pattern repeats.)
Note: We offer the complete line of Focal Point products. If you do not see the Focal Point part you are looking for, Please inquire.
T-92 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com
Full LineMaster
Distributor
Full LineMaster
DistributorClick To View Click Here
Part # F H P R L23145 4-1/8" 3-1/4" 2-9/16" 2-1/8" 8'
Part # F H P R L23135 4-1/8" 3-1/4" 2-1/2" 1-1/4” 8'
Part # F H P R L10700-8 6-9/16" 5" 4-5/16" - 8'
Part # F H P R L10530-8 6-7/8" 5-1/16" 4-5/8" 1-3/4" 8'
Part # F H P R L10750-8 9-5/8" 6-7/8" 6-13/16 " - 8'
Part # F H P R L11280 6" 4-1/4" 4-1/4" - 12'11180 8-7/8" 6-3/16" 6-3/16" - 12'11290 12-3/8" 8-3/4" 8-3/4" - 12'
Part # F H P R L11170 6-1/4" 4-11/16" 4" - 12'11270 9" 7-7/16" 6-1/8" - 12'
Part # F H P R L11040 6" 4-3/8" 4-3/16" 3-7/16 12'11320 9-3/16" 6-7/8" 6" 5-1/4" 12'
High Density PolyurethaneHigh Density PolyurethaneDistinctive Crown MouldingsDistinctive Crown Mouldings
CLICK PART# TO VIEW PRODUCT
STAIR BRACKETSStylish Stairways
W = Width H = Height P = Projection R = Design Repeat L = Length in Feet
Step up your style with our stair brackets. Reminiscent of the great mansions of Europe or the Antebellum South, our stair brackets are available in “right”
or “left” configurations to match your staircase direction.
All brackets shown on this page are “right” brackets. Stair Brackets are sold in sets of two only.
Product featured:A. Rococo Right Bracket
License Number 99024Left Right
H
W
ROCOCO
GEORGIAN FRIEZE 15205
99914 - Left99924 - Right 99114 - Left
99124 - Right
D’EVEREUX FRIEZE 13080
WOODLAWN-SMALL
COLONIAL
99014 - Left99024 - Right
FRIEZES
T-93Phone:1-800-835-4400 • Fax:1-800-835-4403
Click Here
Full LineMaster
Distributor
Full LineMaster
DistributorClick To View
W H P11-7/8” 7-7/8” 3/4” W H P
8-1/4” 6-3/4” 15/16” W H P12” 7-1/2” 1/2”
H P R L7-1/2” 1-3/4” 7-1/8” 92-1/4”
H P R L8-3/8” 1-1/8” 7-1/2” 12’
Stair Brackets & FriezesStair Brackets & FriezesCLICK PART# TO VIEW PRODUCT
“Art for your ceiling”... medallions come in a wide array of styles, from classical to contemporary. “Enlighten” your light fixtures and your interior with medallions.
ACANTHUS
Note: We offer Focal Point’s full line of products. If you do not see the Focal Point part you are looking for, please inquire.
RENAISSANCE ROTUNDA
EGG & DART EMMA
SHELL & BELLFLOWER VICTORIA
D (Diameter)
C (Canopy)
A “canopy” is the decorative cover that is provided with the light fixture. This is installed against the medallion to cover and allow access to the electrical box opening. if you would like to use the canopy, Focal Point provides maximum “canopy size” information. unless otherwise noted, the center holes of the medallions are approximately 4”
T-94 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Full LineMaster
Distributor
Full LineMaster
DistributorClick To View
Part #Dia.(D)
Canopy(C) Proj.
81012 12” 5” 1/2”81018 18” 5” 5/8”81031 30-1/4” 5” 1-1/2”81041 41” 5” 3/4”
Part #Dia.(D)
Canopy(C) Proj.
81618 17-7/8” 4-3/8” 1-1/8”81624 23-7/8” 5” 1-1/8”81641 41” 6-1/2” 1-3/4”
Part #Dia.(D)
Canopy(C) Proj.
83012 12-3/8” 5” 1-3/16”83018 18-1/2” 5” 1-1/8”83024 24-5/16” 5-1/2” 1-3/8”83031 31-3/8” 5-1/2” 1-1/2”83034 34” 5-3/4” 2-3/4”83041 40-7/8” 5-1/2” 2-1/8”
Part #Dia.(D)
Canopy(C) Proj.
83324 24-7/16" 5-1/2" 1-1/2”83331 31-7/16" 5-1/2" 1-1/2”
Part #Dia.(D)
Canopy(C) Proj.
81024 23-11/16” 5” 2-3/4”
Part #Dia.(D)
Canopy(C) Proj.
83424 24-3/8" 5-1/2" 1-5/8”
Part #Dia.(D)
Canopy(C) Proj.
87216 16" 4" 1”
Primed White Unfinished MedallionsPrimed White Unfinished Medallions CLICK PART# TO VIEW PRODUCT
Whether searching for a classic shell design, such as the Gainsborough or Regency, or a more contemporary feel, like the Sonoma or Monterey, niches provide an opportunity to ornament an area, highlight a special piece of artwork or create texture and depth on an otherwise flat space.
T-95Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Full LineMaster
Distributor
Full LineMaster
DistributorClick To View
Gainsborough91000
27-1/4"W x 56"H91350
32-7/8"W x 58-1/2"H
Regency91200
27-1/4"W x 56"H91300
32-7/8"W x 58-1/2"H
Chatham91240
29-3/4"W x 57-1/8"H
Waverly II91630
22-3/4"W x 43-3/8"H91770
16-3/4"W x 36-1/2"H
Waverly91790
16-3/4"W x 36-1/2"HSonoma
9159016-7/8"W x 36"H
9184029-3/4"W x 56-3/4"H
Monterey91520
16-7/8"W x 36"H
Bellemeade91410
15-5/8"W x 29-7/8"H
Adding Character & Depth
NichesNichesCLICK PART# TO VIEW PRODUCT
Geneva Shell Niche with Plinths, available in 3 sizes. The cap is separated from the casing by plinths, and curved-plywood used for the backing. Installed with Wood Casings 91110 or 91220 (sold separately), the overall niche can be any height, and made to fit your application.
Osborne Shell Niche Cap Kit, available in 3 sizes. Each kit contains a niche cap, rim, two pilasters. Installed with Fluted Pilasters 92260 (sold with kit). The backing is created using curved plywood or tempered hardboard cut to the desired size.
^Fits standard 2 x 4 construction
Shell niche caps are used for two reasons - when a standard niche is not wide, tall or deep enough, or the project calls for shelves within the niche. The shell niche cap has a groove molded into the underside, into which bending plywood can be inserted and attached to the framing.
60”
60”
PILASTER CASINGS - 8 ft. Lengths
No. 91110(use with 91001, 91003, niche cap)
No. 91220(use with 91002 niche cap)
T-96 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Full LineMaster
Distributor
Full LineMaster
DistributorClick To View
Gainsborough Regency Chatham Waverly II Waverly Bellemeade Sonoma MontereyPart # 91000 91350 91200 91300 91240 91630 91770^ 91790^ 91410 91590^ 91840 91520^
A 27-1/4" 32-7/8" 27-1/4" 32-7/8" 29-3/4" 22-3/4" 16-3/4" 16-3/4" 15-5/8" 16-7/8" 29-3/4" 16-7/8"B 9" 9-7/8" 9" 9-7/8" 10" 7-5/8" 4" 4" 6-3/4" 5" 8-1/4" 5"C 56" 58-1/2" 56" 58-1/2" 57-1/8" 43-3/8" 36-1/2" 36-1/2" 29-5/8" 36" 56-3/4" 36"D 25-1/2" 31" 25-1/2" 31" 24" 17-3/4" 12-3/4" 12-3/4" 10-1/2" 13" 25-1/4" 13"E 7-3/4" 9" 7-3/4" 9" 7-3/4" 6-5/16" 3-1/2" 3-1/2" 5" 3-1/2" 7-5/8" 3-1/2"F 53-5/8" 56-1/2" 53-5/8" 56-1/2" 53-5/8" 39-13/16" 34-1/2" 34-1/4" 25-13/16" 33-5/16" 53-3/4" 33-5/16"G 28" 33-1/2" 28" 33-1/2" 28" 21-3/8" 14-1/2" 14-1/2" 12-1/2" 14-1/2" 28" 14-1/2"H 9-1/4" 10-1/2" 9-1/4" 10-1/2" 9-1/4" 7-1/4" 4" 4" 6" 4" 9-1/4" 4"I 56-1/2" 59-1/2" 56-1/2" 59-1/2" 56" 42-1/2" 35-1/2" 35-1/2" 28-1/4" 35" 56" 35"J 5-7/8" 5-7/8" 5-7/8" 5-7/8" 2" 2-3/8" 1-7/8" 1-7/8" 2-5/16" 1-3/4" 2" 1-3/4"K 1-3/4" 1-3/4" 1-3/4" 1-3/4" 7/8" 9/16" 5/8" 5/8" 13/16" 1" 1-1/4" 1"L 34-3/4" 41" 34-3/4" 41" 31-5/16" 25-9/16" 18-1/4" 17-1/4" 16-5/8" 17-1/4" 31-5/16" 17-3/4"M 3-1/8" 3-1/4" 3-1/8" 3-1/4" 3-1/8" 8-7/8" 6-1/4" 3-1/8" 6" 3-1/8" 3-1/8" 3-1/8"N 3-1/8" 3-1/8" 3-1/8" 3-1/8" 3-1/8" 7-1/2" 5-1/4" 3-1/8" 6-1/8" 3-1/8" 3-1/8" 3-1/8"O - - 33-1/2" 39" - - - - - - - -P - - 16-7/8" 21" - - - - - - - -Q - - 24-1/8" 29-3/4" - - - - - - - -R - - 13-3/8" 17-1/2" - - - - - - - -S 32-1/4" 39-1/4" - - - - - - - - - -T 8-1/8" 12-5/16" - - - - - - - - - -U 25-1/4" 31" - - - - - - - - - -V 11-5/8" 15-7/8" - - - - - - - - - -
Part #Osborne Geneva
91004 91005 91006 91001 91002 91003
Overall
WIDTHA 42-1/2" 29-3/4" 37-3/16" 42-1/2" 29-3/4" 37-3/16"
DEPTHB 17" 10" 12" 17" 10" 12"
HEIGHTC 23-1/2" 16-1/8" 18-1/4" 23-1/2" 16-1/8" 18-1/4"
Inside
WIDTHD 36" 24" 28-3/4" 36" 24" 28-3/4"
DEPTHE 14-3/4" 8-1/2" 10" 14-3/4" 8-1/2" 10"
HEIGHTF 20-1/4" 13" 14-3/8" 20-1/4" 13" 14-3/8"
RoughOpening
WIDTHG 40" 28" 34" 40" 28" 34"
DEPTHH 16-1/2" 9-1/4" 11" 16-1/2" 9-1/4" 11"
HEIGHTI 22-1/4" 15-1/2" 17-1/2" 22-1/4" 15-1/2" 17-1/2"
CASING N/A N/A N/A 91110 91220 91110PILASTER 60" - included in kit N/A N/A N/A
Casing9111091220
Adding Character & Depth
Create A Point Of Focus
NichesNiches
Niche Shell CapsNiche Shell Caps
CLICK PART# TO VIEW PRODUCT
*PLEASE NOTE: Flexible Mouldings May Shrink Up To 2% During Manufacturing (slightly more on larger profiles) in Size Compared To Rigid Mouldings.
FLEXIBLE MOULDINGS ARE A NON-STOCK ITEM & HAVE A 3 WEEK LEAD TIME. EACH PIECE IS CUSTOM MADE, AND DEPENDING ON APPLICATION, RADIUS INFORMATION AND OR TEMPLATES MAY BE REQUIRED.
Achieve Radii Never Before Possible- Available In 6 Ft. to 12 Ft. Lengths in even 1 Ft. Increments
9/16"
4-1/
4"
9/16"
3-1/
4"
1/4"
1/2"
1/4"
3/4"
3/8"
1"
* BECAUSE EACH PIECE IS MADE TO ORDER, THESE MOULDINGS ARE NON-RETURNABLE.
3/4" THICK
Max Radius 8" Design Repeat: 7/8”
5/8”
1”
IMPORTANT NOTES:1. Material should be removed from box and stored flat when
received. Allow it to come to room temperature 24 hours prior to installation.
2. For best results, the use of construction type adhesive in addition to pneumatic pin nailing is recommended. Use of tape or clamps may be helpful in securing the material in position while adhesives bond.
3. "Made-To-Fit" mouldings can be cut, shaped or sanded using normal woodworking equipment.
4. The use of water based stain such as Miniwax works well. Apply with brush or rag and wipe off. Additional coats may be applied if necessary to match wood. Be sure to allow first coat to dry completely before applying more stain. Finish with clear coat after staining.
5. All paints work well. Best results are seen when a primer coat is applied. When using Alkyd Enamels or Oil based Enamels a water base or Latex undercoat is required. Never paint before installation. The material is flexible and the paint may crack during installation.
1"
1/2"
1-1/2"
3/4"
1-1/16"
1-1/
16"
3/4"
3/4"
1/2"
1/2"
T-97Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
T-1X225 (3/4" x 2-1/4")
T-WM1X4 (3/4" x 3-1/2") T-WM1X5 (3/4" x 4-1/2")
T-WM1X6 (3/4" x 5-1/2")
T-WM1X8 (3/4" x 7-1/4")
C-SM425C-BB6
T-WM120
C-NJ714
T-WM103
T-WM105
T-WM108
DE-903 (1"W x 3/8" Thick)
DE-904 (3/4"W x 1/4" Thick)
DE-905 (1/2"W x 1/4" Thick)
DEM-303 - 96"Must be purchased in full length pieces
DEM-303F - Flexible - 93"Must be purchased in full length pieces
Part # DescriptionA-2 2 oz. Adhesive (Approx 50' med bead)
AA-2 2 oz. Adhesive Accelerator (Approx 150' Coverage)
Flexible "Made To Fit" MouldingsFlexible "Made To Fit" MouldingsCLICK PART# TO VIEW PRODUCT
Concave (Inside) / Convex (Outside) Radius Applications:Although radius information may not be required for this application, profiles can not achieve a tighter radius than 3 times the width of the moulding. Example: A 3" wide moulding can achieve a radius of no tighter than 9". Attempting to do so may result in cracking.
INSIDERADIUS
(CONCAVE)
OUTSIDERADIUS
(CONVEX)
Radius
Height
Width
Elliptical Arch
Casing Applications:Half Round:When ordering half circle radius casing, measure thedistance across the opening at the widest point. This is the diameter of the circle (see diagram). The radius (height) dimension should be one half the length of the diameter. Specify the radius on your order.
Eyebrow:When ordering arches or arcs (also called eyebrows orsectionals), measure the height and width of the arch (see diagram). Specify these dimensions when ordering. Templates must be furnished when ordering elliptical and oval casings.
Elliptical:Template required.
* BECAUSE EACH PIECE IS MADE TO ORDER, THESE MOULDINGS ARE NON-RETURNABLE.
1/2"
3-1/
2"
1-1/4"
2"
7/16"
2-1/
4"
11/16"
2-1/
4"
11/16"
3-1/
4"
1"
3-1/
2"
11/16"
2-1/
4"
11/16"
2-1/
4"
See pages W-3~5 & W-12~18 for our Powder Coated Balusters
T-98 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
T-SL311
T-WM180. T-WM493. T-WM356
T-WM445
T-RB300
T-WM327 T-WM376
Flexible "Made To Fit" MouldingsFlexible "Made To Fit" Mouldings CLICK PART# TO VIEW PRODUCT
Available in Maple, White Oak and Cherry.
4-1/2” Dia.
3-1/2” Dia.
4-1/2” Dia.
CAPS NOT AVAILABLE
5-3/8”
1-3/4”
7-1/2”
2”
5-1/4”
4-1/2” Dia.
HALF ROUND BASE: W 6-1/4” H: 9” D: 2-3/4”
FULL ROUND BASE: W: 6-3/8” H: 8” D: 5-3/4”
FULL ROUNDBASE: W: 5-3/4”,H: 9-5/8”, D: 5”
AVAILABLE INFULL ROUND ONLY!
4-1/2” Dia.
4” Dia.
OVERALL HT: 42-7/8”
FULL ROUND BASE: W: 6-1/4” H: 9” D: 5-1/2”
3-1/2” Dia.
4” Dia.
3” Dia.
3-3/4”Dia.5-1/2”Dia.
OVERALL HT: 43”
HALF ROUND BASE: W: 6-3/8” H: 7-7/8” D: 2-3/4”
OVERALL HT:44-1/8”
FULL ROUND with CAP
BASE: W: 6-1/2” H: 6” D: 6”
FULL ROUND with CAP
BASE: W: 5-3/4”,H: 9-5/8”, D: 2-1/2”
CAPS NOT AVAILABLE
OVERALL HT:45”
See pages T-100~102 for our Hand Carved Solid Maple Fire Surrounds
Shown:HWC2-MP(with ML-2 Surround)
Shown:HWC8-MP(with ML-8 Surround)
Shown:HWC7F-MP
(with ML-7 Surround)
Shown:HWC10-MP(with FS-007
Surround)
T-99Phone:1-800-835-4400 • Fax:1-800-835-4403
Click Here
HWC2-MP (MAPLE)
HWC2-WHO (WHITE OAK)
HWC2-CH (CHERRY)
HWC8F-MP (MAPLE)
HWC8F-WHO (WHITE OAK)
HWC8F-CH (CHERRY)
HWC10F-MP (MAPLE)
HWC10F-WHO (WHITE OAK)
HWC10F-CH (CHERRY)
HWC2F-MP (MAPLE)
HWC2F-WHO (WHITE OAK)
HWC2F-CH (CHERRY)
HWC8-MP (MAPLE)
HWC8-WHO (WHITE OAK)
HWC8-CH (CHERRY)
HWC7F-MP (MAPLE)
HWC7F-WHO (WHITE OAK)
HWC7F-CH (CHERRY)
HWC10-MP (MAPLE)
HWC10-WHO (WHITE OAK)
HWC10-CH (CHERRY)
Half Round & Full Round ColumnsHalf Round & Full Round ColumnsCLICK PART# TO VIEW PRODUCT
Our solid wood maple surrounds are hand carved from one piece of wood by master European craftsmen who have passed their art down from generation to generation. Meticulously detailed in design, these surrounds create a dramatic look worthy of the finest hearths and fireplaces. Surrounds come unfinished, ready for stain to match your surrounding woodwork. Some filling, sanding and assembly may be required.
T-100 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com
ML-7 >Inside Width: 58”Inside Height: 42”Body Width: 76-1/2”Overall Height: 54-3/4”Shelf Width: 82”Shelf Depth: 10-5/8”
ML-7SInside Width: 50”Inside Height: 40”Body Width: 68-1/2”Overall Height: 52-3/4”Shelf Width: 74”Shelf Depth: 10-5/8”
< ML-2Inside Width: 58”Inside Height: 42”Body Width: 76-1/2”Overall Height: 58-1/2”Shelf Width: 83-1/8”Shelf Depth: 10-1/2”
ML-2SInside Width: 50”Inside Height: 40”Body Width: 68-1/2”Overall Height: 56-1/2”Shelf Width: 75-1/8”Shelf Depth: 10-1/2”
Notes:• All dimensions are approximate.• Some assembly is required.• All fire surrounds must ship freight.
Hand Carved Solid Maple Fire SurroundsHand Carved Solid Maple Fire Surrounds CLICK PART# TO VIEW PRODUCT
T-101Phone:1-800-835-4400 • Fax:1-800-835-4403
< EP-14Inside Width: 58”Inside Height: 42”Body Width: 72-1/4”Overall Height: 55-3/8”Shelf Width: 78-1/2”Shelf Depth: 7-1/2”
EP-14SInside Width: 50”Inside Height: 40”Body Width: 64-14”Overall Height: 53-3/8”Shelf Width: 70-1/2”Shelf Depth: 7-1/2”
FS-007 >Inside Width: 58”Inside Height: 42”Body Width: 82-1/4”Overall Height: 60”Shelf Width: 89-1/2”Shelf Depth: 10”
FS-007SInside Width: 50”Inside Height: 40”Body Width: 74-1/4”Overall Height: 58”Shelf Width: 81-1/2”Shelf Depth: 10”
Notes:• All dimensions are approximate.• Some assembly is required.• All fire surrounds must ship freight.
Hand Carved Solid Maple Fire SurroundsHand Carved Solid Maple Fire SurroundsCLICK PART# TO VIEW PRODUCT
T-102 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com
^ ML-8Inside Width: 58”Inside Height: 42”Body Width: 72-1/2”Overall Height: 53-1/8”Shelf Width: 77-5/8”Shelf Depth: 8”
ML-8SInside Width: 50”Inside Height: 40”Body Width: 64-1/2”Overall Height: 51-1/8”Shelf Width: 69-5/8”Shelf Depth: 8”
^ FS-004Inside Width: 58”Inside Height: 42”Body Width: 73”Overall Height: 54-3/4”Shelf Width: 79-3/8”Shelf Depth: 8”
FS-004SInside Width: 50”Inside Height: 40”Body Width: 65”Overall Height: 52-3/4”Shelf Width: 71-3/8”Shelf Depth: 8”
Notes:• All dimensions are approximate.• Some assembly is required.• All fire surrounds must ship freight.
Hand Carved Soild Maple Fire SurroundsHand Carved Soild Maple Fire Surrounds CLICK PART# TO VIEW PRODUCT
1. Danbury (Paint Grade) shown painted
3. Harrisburg (Paint Grade) shown painted
2. Monticello (Paint Grade) shown painted
NOTE: Surrounds are finished for photographic purposes, yours will arrive unfinished.
4. Fredricksburg (Paint Grade) shown painted
T-103Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Inside Opening
Width
Inside Opening
HeightReturnDepth
ShelfLength
ShelfDepth
LegWidth
Leg &Shelf
WidthBodyWidth
Total MantelHeight
BreastHeight
Part # Size Name A B C D E F G H I J
1 WFS-DANS-* Small Danbury 48” 42” 1-1/2” 66-1/2” 7” 5-3/4” 8-3/4” 59-1/2” 54-3/4” 12-3/4”WFS-DANL-* Large 54” 42” 1-1/2” 72-1/2” 7” 5-3/4” 8-3/4” 65-1/2” 54-3/4” 12-3/4”
2 WFS-MONS-* Small Monticello 48” 42” 1-1/2” 66-1/2” 7” 5-3/4” 8-3/4” 59-1/2” 54-3/4” 12-3/4”WFS-MONL-* Large 54” 42” 1-1/2” 72-1/2” 7” 5-3/4” 8-3/4” 65-1/2” 54-3/4” 12-3/4”
3 WFS-HAS-* Small Harrisburg 48” 42” 1-1/2” 75-1/2” 9-1/2” 9” 13-3/4” 66” 55” 13”WFS-HAL-* Large 54” 42” 1-1/2” 81-1/2” 9-1/2” 9” 13-3/4” 72” 55” 13”
4 WFS-FRS-* Small Fredricksburg 48” 42” 1-1/2” 68” 7-1/2” 6” 10” 60” 55” 13”WFS-FRL-* Large 54” 42” 1-1/2” 74” 7-1/2” 6” 10” 66” 55” 13”
Custom Sizes Available
ALL STYLES SHOWN IN PAINT GRADE ALSO AVAILABLE IN UNFINISHED MAHOGANY, OAK, WALNUT AND CHERRY
(Samples Available)
Add color code to end of each part number (ex. WFS-HIS-OAK) *PG = Paint Grade, *OAK = Oak, *CH = Cherry, *WAL = Walnut, *MAH = Mahogany
Classic Styling... Exquisite Craftsmanship... Affordable Pricing...Why pay a mill worker to create a mantel for your home when we can provide the same quality craftsmanship at a fraction of the cost?
Old World Craftsmanship...Affordable Elegance...We offer the best of both worlds. Our products are carefully constructed to give your home the beautiful look you want, at a price you can afford. From classic to contemporary, in unfinished oak veneer or paint grade (unfinished poplar), you’ll find the style to suit your lifestyle.
Classic Wood Fire SurroundsClassic Wood Fire SurroundsCLICK PART# TO VIEW PRODUCT
6. Leesburg (Paint Grade) shown painted
8. Hartford (Paint Grade) shown painted
5. Hillsboro (Paint Grade) shown painted
7. Concord (shown in Oak)
NOTE: Surrounds are finished for photographic purposes, yours will arrive unfinished.
T-104 ARCHITECTURAL PRODUCTS BY OUTWATER L.L.C. • www.outwater.com Click Here
Inside Opening
Width
Inside Opening
HeightReturnDepth
ShelfLength
ShelfDepth
LegWidth
Leg &Shelf
WidthBodyWidth
Total MantelHeight
BreastHeight
Part # Size Name A B C D E F G H I J
5WFS-HIS-* Small
Hillsboro48” 42” 1-1/2” 69-1/2” 8-1/2” 6” 10-3/4” 59-1/2” 55” 13”
WFS-HIL-* Large 54” 42” 1-1/2” 75-1/2” 8-1/2” 6” 10-3/4” 65-1/2” 55” 13”
6WFS-LES-* Small
Leesburg48” 42” 1-1/2” 74-1/2” 9” 9” 13-1/4” 66” 55” 13”
WFS-LEL-* Large 54” 42” 1-1/2” 80-1/2” 9” 9” 13-1/4” 72” 55” 13”
7WFS-COS-* Small
Concord48” 42” 1-1/2” 72-1/2” 7” 8-1/4” 12-1/4” 64-1/2” 56” 14”
WFS-COL-* Large 54” 42” 1-1/2” 78-1/2” 7” 8-1/4” 12-1/4” 70-1/2” 56” 14”
8WFS-HARTS-* Small
Hartford48” 42” 1-1/2” 75-1/2” 8-5/8” 9-3/4” 13-3/4” 67-1/2” 59” 17”
WFS-HARTL-* Large 54” 42” 1-1/2” 81-1/2” 8-5/8” 9-3/4” 13-3/4” 73-1/2” 59” 17”
Custom Sizes Available
ALL STYLES SHOWN IN PAINT GRADE ALSO AVAILABLE IN UNFINISHED MAHOGANY, OAK, WALNUT AND CHERRY
(Samples Available)
Add color code to end of each part number (ex. WFS-HIS-OAK) *PG = Paint Grade, *OAK = Oak, *CH = Cherry, *WAL = Walnut, *MAH = Mahogany
Classic Wood Fire SurroundsClassic Wood Fire Surrounds CLICK PART# TO VIEW PRODUCT
10. Highlander (shown in Cherry) finished9. Oxford (shown in Oak) finished
General Information• Made to fit standard 36” and 42” wide fireboxes• Available in unpainted MDF & hardwoods (paint grade/
unfinished poplar/cherry) or stain grade/unfinished oak veneer.
• Constructed of veneered MDF & select hardwoods• Designed to overlap the facing material surrounding the
firebox (tile, marble, slate, etc.) This allows flexibility in sizing and facing materials. (see “C” dimension)
• Installation instructions are included with every order• Installation requires basic tools and materials including
construction adhesive, nails/screws and 1” x 2” x 4’ lumber strips. (which can be purchased locally)
• After some filling and sanding, surrounds can be finished with most quality paints or stains.
These decorative, high density ornaments are lightweight, primed and ready to paint.
Part # Height Width Proj.DCOR-95-XL 41-1/2” 8-1/8” 7-1/4”
Part #PFS-59
(3 Piece Set, 1 Header & 2 Legs)
Mantel HeaderHEIGHT 9”WIDTH 59”PROJ. 6-5/8”
Mantel LegHEIGHT 42-1/2”WIDTH 6-5/8”PROJ. 6-1/2”
NOTE: Surrounds are finished for photographic purposes, yours will arrive unfinished.
T-105Phone:1-800-835-4400 • Fax:1-800-835-4403Click Here
Inside Opening
Width
Inside Opening
HeightReturnDepth
ShelfLength
ShelfDepth
LegWidth
Leg &Shelf
WidthBodyWidth
Total MantelHeight
BreastHeight
Part # Size Name A B C D E F G H I J
9WFS-OXS-* Small
Oxford 48” 42” 1-1/2” 78” 11” 11” 15” 70” 59” 17 5/8”
WFS-OXL-* Large 54” 42” 1-1/2” 84” 11” 11” 15” 80” 59” 17 5/8”
10WFS-HIGHS-* Small
Highlander48” 42” 1-1/2” 66” 6 3/4” 5-3/4” 9 3/4” 59 1/2” 54 3/4” 12 3/4”
WFS-HIGHL-* Large 54” 42” 1-1/2” 72” 6 3/4” 5-3/4” 9 3/4” 65 1/2” 54 3/4” 12 3/4”
Custom Sizes Available
ALL STYLES SHOWN IN PAINT GRADE ALSO AVAILABLE IN UNFINISHED MAHOGANY, OAK, WALNUT AND CHERRY
(Samples Available)
Add color code to end of each part number (ex. WFS-OKS-OAK) *PG = Paint Grade, *OAK = Oak, *CH = Cherry, *WAL = Walnut, *MAH = Mahogany
Classic Wood Fire SurroundsClassic Wood Fire Surrounds
PolyurethanePolyurethaneMantel Headers & LegsMantel Headers & Legs
CLICK PART# TO VIEW PRODUCT