Upload
others
View
22
Download
1
Embed Size (px)
Citation preview
BOEING 777 The Boeing 777 has a capacity of up to 368 passengers, with a range of 5,240 to
8,555 nautical miles. The Boeing 777 is designed for many diverse demands that require complex electrical wiring systems containing many different connectors, contacts and terminals. Proper maintenance and repair of these electrical systems requires precision tools. To protect your investment, DMC offers a comprehensive maintenance kit to service the wiring systems of the Boeing 777.
DMC977 CUSTOM MAINTENANCE KITThe DMC977 Wiring System Service Kit, provides a turn-key solution and the tools necessary to strip, crimp, install and remove the typical contacts and terminals of this wiring system. The DMC977 kit includes the tool to application cross reference information that indicates the particular tool(s) that should be selected to repair a specific connector, contact, or terminal. In addition, the kit also contains illustrated operating instructions for the designated tooling.
COMPREHENSIVE SOLUTION FOR MAINTENANCE AND REPAIR DMC believes in providing a comprehensive, turn-key solution for electrical wire maintenance and repair. Since these tools, together with their operating instructions, are contained in a single kit, the connector repair can be made in the shortest time possible, thus permitting a rapid return of your aircraft to service. Tool kit supplied in three environmentally sealed cases and includes: Name Plate, Foam Pads/Inserts, Contents Charts, Instruction Charts, and Tool Selection Charts.
Actual Kit may vary from example shown.Instruction Sheets
Tool Selection Charts
DMC977 BOEING 777 Kit
09/20 DMC977 REV 2 VER 1COPYRIGHT © 2020 Daniels Manufacturing Corp. ALL RIGHTS RESERVED
DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USAPHONE (407) 855-6161 • FAX (407) 855-6884 • www.dmctools.com • E-MAIL: [email protected]
DMC977Boeing 777 Kit
09/20 DMC977 REV 2 VER 1COPYRIGHT © 2020 Daniels Manufacturing Corp. ALL RIGHTS RESERVED
DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USAPHONE (407) 855-6161 • FAX (407) 855-6884 • www.dmctools.com • E-MAIL: [email protected]
DMC977 BOEING 777 Kit
DMC CONNECTOR COVERAGEMANUFACTURER SERIES
AMP Solistrand, PIDG
Amphenol Single Wire Splice
Amphenol/Bendix 10-584762 and 10-584796
Arizona Integrated Elec. AMC, ATC
Boeing BACC63, BACC66, BACC45, BACS16, S280W55, S280W554
Burndy MB12
Cinch 1167A, ACIS
Cody CQ()MA, CQ()RA, CTZ, C*MA, CB0Z, CBCXR
Eaton Lighted Pushbutton Switches
Fenwal Fire Detection Connectors
ITT CannonDPXMA, DPXBMA, D*MA, BKAC/D FRA, CA66278/CA66279, CA80503
ITT Gremar Twinax Connector
Kings Electronics RF Coaxial
Pyle-National ESC
Raychem MTC, D-436
Rosemount 00855
RMS R0710, R0724
Souriau 892
MIL-DTL-26482 Series 1 and 2
MIL-DTL-26500 -
MIL-DTL-38999 Series 1
AS50151 3400 and 3450 Series
MIL-DTL-83723 Series 3
KIT CONTENTS7 Crimp Tools
16 Positioners
3 Turret Heads
23 Die Sets
7 Single Position Heads
1 Universal Turret Head
1 Universal Positioner
2 In-Service Inspection Gages
15 Metal Insertion Tools
17 Metal Removal Tools
1 Metal Ins/Rem Tool
146 Plastic/Metal Ins/Rem Tools
4 Contact gages
3 Unwired Contact Removal Tools w/ Probes
1 Wire Cutter
1 Thermal Wire Stripper
1 Die Removal Tool
3 Hex Wrenches
1 Hydraulic Crimp Tool
1 Torque Driver
2 Cable Tie Tools
4 Coaxial Cable Strippers
17 Trim Jigs
1 Wire Separator Tool
1 Banding Tool w/Accessories
Coverage: Airframe Power Connectors, Terminals size 12 AWG and Smaller, Coaxial ConnectorsType of Inserts: Unicellular Polyethylene Foam with Silhouetted Tool CavitiesType of Construction: 3 Yellow Fiberglass/Aluminum Cases
NOTICE: Unless otherwise stated by DMC, tools contained in this kit have been selected based upon their suitability to service the related connector or contact indicated at the time of design. Military Standard tools have been utilized wherever possible. These tools are not necessarily the production tools used to manufacture the aircraft and therefore, these tools may or may not correspond to the tools listed in the OEM wiring manual and/or the Chapter 20 Standard Wiring Practices Manual list of approved tooling. Verification Is Required.
Refurbishment ServicesTo ensure the longevity of your investment, DMC offers kit refurbishment and calibration services. Contact DMC for additional details.