KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de

DECKEL MAHO DMU 50 eVo linear

5 axes simultaneous machining center

Manufacturer DECKEL MAHO Model DMU 50 eVo linear Manufacture year 2005 Control HEIDENHAIN iTNC 530 Spindle hours approx. 12.540 h Machine number 10915547654 Travels X – 500 mm / Y – 450 mm / Z – 400 mm

C – 360° / B – 0 - 161,955°

NC swivel rotary table Ø 500 x 380 mm / approx. 200 kg Chain magazine 60 places Internal cooling Paper band filter 40 bar / Tank 600 l Drive cooling of the B- and C-axes Coolant device for spindle and drive Direct measuring system Spindle speed 20 – 18.000 rpm Tool holder SK 40 Rotary inspection glass Chip conveyor Electronic handwheel Probe HEIDENHAIN TS 640 Machine installation elements Oil mist separator User guide / Documentation Machine parameters

EQUIPMENT

2 - DECKEL MAHO DMU 50 eVo linear

TECHNICAL DATA

Working area X-axis 500 mm

Y-axis 450 mm

Z-axis 400 mm

B-axis 0 – 161,955°

C-axis n x 360°

Feed drive Linear motor for X axis

AC-Servomotor for C, B, Y, Z axes

Feed speed, stepless X-, Y-, Z-axis up to 20.000 mm/min

Feed speed, stepless C-, B-axis up to rapid traverse speed

Input resolution C-, B-, X-, Y-, Z-axis 0,01 mm

Rapid traverse Y-, Z-axis 50 m/min

Rapid traverse X-axis 80 m/min

Rapid traverse B-axis 40 min-1

Rapid traverse C-axis 50 min-1

Set-up mode (mode 2) X-, Y-, Z-axis 20 – 2.000 mm/min

Set-up mode (mode 2) C-, B-axis 2,6 min-1

Set-up mode (mode 3) X-, Y-, Z-axis 20 – 5.000 mm/min

Set-up mode (mode 3) C-, B-axis 6,6 min-1

Measuring system Resolution C-, B-, X-, Y-, Z-axis 0,001 mm

3 - DECKEL MAHO DMU 50 eVo linear

4 - DECKEL MAHO DMU 50 eVo linear

Main drive AC-Servomotor / Motor spindle 18.000 rpm

Torque, available at the spindle see diagramm

Engine power at 100% DC / at 40% DC see diagramm

Speed, stepless 20 – 18.000 U/min

Speed, in set-up mode 20 – 800 U/min

5 - DECKEL MAHO DMU 50 eVo linear

Working spindle 18.000 rpm Tool holder

SK 40 according to DIN 69871 A

Tool tension hydraulical / mechanical

Pull studs DIN 69 872, Form A

Tool changer Magazine places 60

Max. tool-Ø without free places 80 mm

Max. tool-Ø with free places 130 mm

Max. tool length from spindle nose 300 mm

Max. tool weight, with autom. tool change 6 kg

Max. tool total weight in the magazine 180 kg

NC rotary table with swivel axis C-axis

Clamping surface rotary axis Ø 500 x 380 mm

Distance of the T-grooves / size 63 mm / 14 H7

Centering bore Ø 30 mm H6

Max. torque (rotary axis) 1.491 Nm

Max. rotation of the table plate (rotary axis) 50 rpm B-axis

Max. swivel torque 1.864 Nm

Swivel speed 40 rpm

Swivel range (swivel axis) 0° to 161,955°

Input and display resolution 0,001°

Weight, approx. 420 kg

Loading, max. (table center) 200 kg

6 - DECKEL MAHO DMU 50 eVo linear

Table settings of the B-axis

Starting position horizontal (0°)

Input angle 0°

Table setting vertical (90°)

Table setting for processing negative angles (-18 °)

7 - DECKEL MAHO DMU 50 eVo linear

Angle specifications

8 - DECKEL MAHO DMU 50 eVo linear

Operator console

The iTNC 530 control panel from Heidenhain was adapted by DECKEL MAHO. In addition, here are described only those operating elements which do not stand or differ in the Heidenhain user manual.

1 Control elements of the iTNC 530

2 Machine operator panel

3 Additional operator panel

9 - DECKEL MAHO DMU 50 eVo linear

Probe HEIDENHAIN TS 640

1 Clamping cone, suitable for tool clamping system

2 Infrared receiver in the headstock

3 Probe clamped in the tool holder

Use Three-dimensional measuring probe with conical shank and optical measured value transmission for measuring the workpiece, - for centering the work spindle axis on the center of the hole or pin - to set up the plan - for positioning the work spindle axis at the workpiece edge A corresponding expansion stage of the machine is required.

10 - DECKEL MAHO DMU 50 eVo linear

Working space dimensions

11 - DECKEL MAHO DMU 50 eVo linear

NC rotary table horizontal / vertical

12 - DECKEL MAHO DMU 50 eVo linear

NC rotary table 18 ° negative angle

MACHINE PICTURES

13 - DECKEL MAHO DMU 50 eVo linear

14 - DECKEL MAHO DMU 50 eVo linear

INSTALLATION DATA

15 - DECKEL MAHO DMU 50 eVo linear

Height of the machine 2.561 mm Transport height 2.512 mm

Width of the machine without control 2.187 mm without tool magazine 1.592 mm

with control 3.651 mm

with chip conveyor 3.582 mm

Transportllenght without handle 3.054 mm

Machineweight 7.000 kg Internal coolant system, max. 800 kg

Chip conveyor, max. 1.250 kg

16 - DECKEL MAHO DMU 50 eVo linear

Space requirement

E – Power supply P – Pneumatic connection

17 - DECKEL MAHO DMU 50 eVo linear

18 - DECKEL MAHO DMU 50 eVo linear

TRANSPORT DATA

19 - DECKEL MAHO DMU 50 eVo linear

20 - DECKEL MAHO DMU 50 eVo linear

21 - DECKEL MAHO DMU 50 eVo linear

22 - DECKEL MAHO DMU 50 eVo linear

*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*

Thank you very much for your interest

KISTNER GmbH & Co. KG | Industriestraße 7-9 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de

Diapositiva numero 1Diapositiva numero 2Diapositiva numero 3Diapositiva numero 4Diapositiva numero 5Diapositiva numero 6Diapositiva numero 7Diapositiva numero 8Diapositiva numero 9Diapositiva numero 10Diapositiva numero 11Diapositiva numero 12Diapositiva numero 13Diapositiva numero 14Diapositiva numero 15Diapositiva numero 16Diapositiva numero 17Diapositiva numero 18Diapositiva numero 19Diapositiva numero 20Diapositiva numero 21Diapositiva numero 22Diapositiva numero 23