Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
GLOBAL SALESOctober. 2006
DMT EMEA GmbHAm Anger 8, D-82237 Wörthsee-Etterschlag, GermanyT e l : +49 (8153) 88 97-20Fax : +49 (8153) 88 97-50www.dmtemea.de
DMT ASIA Co., LtdNo.20, Xing Bei Rd., Dounan 63041,Yunlin, TaiwanT e l : +886-(0)937480764Fax : +886-2 2609 1854www.dmfit.com.cn
DMT USA Inc.West Region : 5423 G Street, Chino,California, 91710, USAT e l : +1-909-628-1019Fax : +1-909-628-2127
East Region : 3614 Hamilton Ave.Baltimore, MD 21214, USAT e l : +1-443-451-5056Fax : +1-443-451-4378www.dmtamerica.com
DMT JAPANNo.83, Yuni Tenmabashi 1-27,Tenmabashi-Kyomachi, Chuou-Ku,OSAKA 540-0032, JapanT e l : +81-6-6947-8007Fax : +81-6-6947-8005www.dmfit.com
Head Office & Factory#718-2, Gojan-Dong, Namdong-Gu, Inchon, KOREATEL : +82-32-812-7311~3 FAX : +82-32-812-7314www.goodssen.com
General Specifications ..................... 6
Acetal Fittings (Gray) ...................... 8Acetal Fittings (White) .................. 14
Acetal Fittings (Black) .................. 19
Acetal Power Fittings(Inch/Metric) ... 26Clean Fittings ............................ 28
Polypropylene Fittings .................. 29
Control Valves ........................... 31Hand Valves .............................. 32Check Valves.............................. 35
Accessories .............................. 36Cartridges ................................. 38Filter Strainers ........................... 40Polyethylene Tubing .................... 41Thread Specifications .................. 42Chemical Compatability ................ 43Terms and Conditions
C O N T E N T S
Since our creation in 1987,we have taken a
leading position in the plasticextruded casing industry becauseof our quality-first mindset, integrityand technical leadership.Now, we have made a second boldleap - into the fittings business. Thegoal is to be a global leader,providing the best net value infittings products to the entire rangeof fluid handling industries.
PUSH-IN TUBE FITTINGS
US FDA approved materials :fittings are produced using FDA
approved materials.
SK Zert, ANSI/NSF-51, 61 Certifications :fittings are suitable for
contact with foodstuffs & drinking water.
ISO 9001/ISO14001 Certifications :fittings are produced under a registered
ISO 9001 / ISO 14001 quality system.
WRAS approval :complies with WRAS requirements
of the United Kingdom Water Regulations.
TECHNICAL INFORMATION
INCH SIZE PRODUCTS
METRIC SIZE PRODUCTS
POWER FITTING
P P SERIES
VALVES
54
PUSH-IN TUBE FITTINGS
GripperRing(STS)
Cap
Tubes : PEXPVCPEBrassCopper
Body
O-Ring : NBR or EPDM
Collets
Please read, understand, and follow all instructions, precautions,and warnings prior to using Dmfit(r) products on pressurizedsystems. Failure to follow all instructions, precautions, andwarnings may result in bodily harm or property damage.
Warnings and PrecautionsFittings are not recommended for use with liquids other than water andfood or beverage products. Where fittings may be used with otherchemicals, refer to published chemical compatibility data, or contactGoodSSEN for advice.
Do not disassemble or modify the individual product, as this may causea product malfunction, leak, or failture and voids the product warranty.
Do not over-stress the fitting by rotation, twist, bending, shock, fatigue,or other excess force, This may damage the fitting and causemalfuction, leak, or failure and voids the product warranty,
Do not use the product where ambient temperature or fluid temperaturemay exceed 65 (150 ) in domestic environment Food & Drink,inderstrial Pneumatic. This may damage the fitting and causemalfuction, leak, or failure.
Do not use pipe dope or other liquid thread sealers. Use only Teflon(r)tape to seal threaded connections.
If your plumbed line is used as an electrical ground, you must use ajumper wire to provide continuity across plastic fittings and tubing.
Never press collets toward the body unless attempting to separatetubing from a fitting in an unpressurized line. The use of the DMfit(r)Locking Clip is advised to restrict inadvertent disassembly ofconnections.
GoodSSEN reserves the right to modify the product from time-to-timeas required for quality improvement and per market requirements.Actual product may differ from pictures shown.
Connecting DMfit(r) products to tubing or connecting elements otherthan DMfit(r) products is not warranted for performance. Always performany checks and testing necessary to verify acceptable function.
Before making any tube connection, verify that the end of the tube hasbeen cut squarely and there are no scratches on the tube OD within30mm of the end.
When making a tube connection, occasionally a gripping of the tubemay occur just as the tube begins to pass through the o-ring, althoughthe seal is not yet made. In this case, push the tube deeply once moreto complete assembly of the connection. Failure to completely seat thetube into the fitting may cause a leak.
When using metallic tubing, de-burr the tube ends to avoid potentialcutting or other damage to the o-ring.
After assembling a tube connection, tug with moderate force to checkfor proper gripping of the tube.
Before disassembling tube connections, always verify that pressure hasbeen removed from the system.
When disassembling tube connections, always press the collet evenlytoward the body and then pull the tube. If a locking clip is used, removethe locking clip before attempting to separate a tube connection.
When tightening threaded fittings, use care not to over-torque the fittingas this may damage the fitting and cause a leak or other failure.
Acetal : Also known as POM. Highly durable and resistant to fatigue andcreep. It has high resistance to a wide range of organic &inorganic chemicals and detergents. Not recommended for usewith strong acids or repeated exposure to strong oxidizers.
Polypropylene : Has excellent chemical resistance, cold endurance,and high tolerance to oxidizers.
Terms and Conditions
Material Characteristics
Outer Diameter Tolerance Limit of Tubing Used with Fittings
For use at higher temperatures or pressures, please contact your DMfitrepresentative for assistance.
Maximum Permissible Torque
The above values are average maximum applied torque.Actual results may vary.
ThreadTorque
MaximumTorque
MaximumTorque
(N m)
(N m)
3.01.5
7.0~9.0 22.0~24.0 28.0~30.0 40.012.0~14.0
4.0
3/43/8 , 1/21/8 , 1/4
Fitting Working Pressure and Temperatare
Material Options
A - acetal
P - polypropylene
B - brass
Fittings Color O-ring
Gray, Black,White
WhiteNBR
EPDM
brass, orchromed
Material Standards
Plastic
Steel
Size Tolerance
Small Size
Large Size
5/32 , 4mm3/16 , 5mm1/4 , 6mm
5/16 , 8mm3/8 , 10mm1/2 , 12mm
5/8 , 15(16)mm7/8 , 18(22)mm
28mm
0.004 ( 0.1mm)
Small Size Large Size
5/32
4mm
16bar (230PSI)
16bar (230PSI)
10bar (150PSI)
13.5bar (195PSI)
13.5bar (195PSI)
7bar (102PSI)
11bar(170PSI)
7bar(100PSI)
7bar(100PSI)
3/16
5mm
1/4
6mm
5/16
8mm
3/8
10mm
1/2
12mm28mm
5/8
15mm 16mm
7/8
18mm 22mm
20(68 )
65(150 )
1(34 )
SIZE
Temperature
Installing DMfit Fittings
Cut the part of the tube to beinserted into the fitting toplane the end.
Make sure to use a cleantube without any foreignmaterial or cracks.
When inserting the tube,remove any obstructions beforefully inserting the tube. Makesure the tube is fully inserted.
Inserting the tube into the fittingonly takes moderate force. Thetube or fitting should not bescratched or damaged in theprocess, as this is the maincause for water leaks later on.
To make sure that the fittingis properly connected to thetube, pull it once. Afterpulling, push the tube into thefitting once more for acomplete insertion.
When no play is desired forthe fitting and tube, use ourcompany's LC to eliminatethe play of the fitting.
Make sure to completelyeliminate pressure beforedisassembling the fitting.
When disassembling thetube, push the clip in directionof the main assembly andthen pull the tube out for easydisassembling.
Fittings and tubes can bereused.
76
I II
No.
1
2
3
4
Part Name
Collets
Support Ring
O-ring
Body
Material
Acetal
Acetal
NBR
Acetal
Q’ty
2
2
2
1
Remark
All diagrams are based on the UC0808 product.
Exceptional, Small sizes don’t have Sup-Ring in the body.
PUSH-IN TUBE FITTINGS
Fluid
FluidFluid
Fluid
Fluid
ACETAL FITTINGS (GRAY)
8 9
MCBT - Male Connector BSPT(PT) Thread
PART NO. BSPT(PT)Thread Qty / BoxTube O.D.
AMCBT 0102 5/32 1/8 500AMCBT 0104 5/32 1/4 500AMCBT 0302 3/16 1/8 500AMCBT 0304 3/16 1/4 500AMCBT 0402 1/4 1/8 500AMCBT 0404 1/4 1/4 400AMCBT 0406 1/4 3/8 400AMCBT 0407 1/4 1/2 200AMCBT 0502 5/16 1/8 400AMCBT 0504 5/16 1/4 400AMCBT 0506 5/16 3/8 350AMCBT 0602 3/8 1/8 300AMCBT 0604 3/8 1/4 300AMCBT 0606 3/8 3/8 300AMCBT 0607 3/8 1/2 200AMCBT 0706 1/2 3/8 200AMCBT 0707 1/2 1/2 150
EU - Elbow Union
PART NO. Tube O.D. Qty / BoxTube O.D
AEU 0101 5/32 5/32 700AEU 0303 3/16 3/16 700AEU 0404 1/4 1/4 400AEU 0501 5/16 5/32 400AEU 0503 5/16 3/16 400AEU 0504 5/16 1/4 300AEU 0505 5/16 5/16 300AEU 0603 3/8 3/16 300AEU 0604 3/8 1/4 300AEU 0605 3/8 5/16 200AEU 0606 3/8 3/8 200AEU 0704 1/2 1/4 150AEU 0705 1/2 5/16 150AEU 0706 1/2 3/8 150AEU 0707 1/2 1/2 150
ME - Male Elbow NPTF Thread
PART NO. Qty / BoxNPTFThreadTube O.D.
AME 0302 3/16 1/8 500AME 0402 1/4 1/8 500AME 0404 1/4 1/4 400AME 0406 1/4 3/8 350AME 0504 5/16 1/4 300AME 0506 5/16 3/8 250AME 0604 3/8 1/4 250AME 0606 3/8 3/8 250AME 0706 1/2 3/8 200AME 0707 1/2 1/2 150
MCB - Male Connector BSP(P) Thread
PART NO. BSP(P)Thread Qty / BoxTube
O.D.AMCB 0102 5/32 1/8 500AMCB 0104 5/32 1/4 500AMCB 0302 3/16 1/8 500AMCB 0304 3/16 1/4 400AMCB 0402 1/4 1/8 400AMCB 0404 1/4 1/4 400AMCB 0502 5/16 1/8 400AMCB 0504 5/16 1/4 400AMCB 0506 5/16 3/8 250AMCB 0602 3/8 1/8 300AMCB 0604 3/8 1/4 300AMCB 0606 3/8 3/8 250AMCB 0607 3/8 1/2 200AMCB 0706 1/2 3/8 200AMCB 0707 1/2 1/2 150
MES - Male Elbow Swivel NPTF Thread
PART NO. Qty / BoxNPTFThreadTube O.D.
AMES 0102 5/32 1/8 500AMES 0104 5/32 1/4 400AMES 0302 3/16 1/8 500AMES 0402 1/4 1/8 300AMES 0404 1/4 1/4 250AMES 0502 5/16 1/8 200AMES 0504 5/16 1/4 200AMES 0506 5/16 3/8 200AMES 0604 3/8 1/4 150AMES 0606 3/8 3/8 150AMES 0706 1/2 3/8 100AMES 0707 1/2 1/2 100
Suitable forWater & foods use : products are manufactured from safe, non-toxic materials
meeting the requirements of the US FDA, WRAS, ANSI/NSF-51, 61, andSK Zert. Our products are widely used in water purification,food/beverage and pneumatic systems.
Function & Quality : provides quick and convenient assembly - saving time &expense. Our ISO9001 registered quality system ensures our customersa superior level of product quality. Defects are easily detectable andmaintenance is easy with its easy dismantling for access.
Collet Design : Our unique oval collet design is superior and more practical, and is animprovement welcomed by our world-wide customers in all industries.
Applications : Beyond water and food use, fittings can be used with air, gases, vacuum,& liquids. And all connections can be assembled & disassembledrepeatedly. A broad of sizes covers a broad scope of applications.
Color: Gray(Acetal)
MC - Male Connector NPTF Thread
PART NO. NPTFThread Qty / BoxTube O.D.
AMC 0102 5/32 1/8 500AMC 0104 5/32 1/4 500AMC 0302 3/16 1/8 500AMC 0402 1/4 1/8 500AMC 0404 1/4 1/4 500AMC 0406 1/4 3/8 300AMC 0407 1/4 1/2 200AMC 0502 5/16 1/8 400AMC 0504 5/16 1/4 400AMC 0506 5/16 3/8 350AMC 0602 3/8 1/8 300AMC 0604 3/8 1/4 300AMC 0606 3/8 3/8 250AMC 0607 3/8 1/2 200AMC 0706 1/2 3/8 200AMC 0707 1/2 1/2 150
SAB - Stem Adapter BSP(P) Thread
PART NO. BSP(P)Thread Qty / BoxStem O.D.
ASAB 0604 3/8 1/4 400ASAB 0606 3/8 3/8 250ASAB 0607 3/8 1/2 200ASAB 0707 1/2 1/2 150
MCF - Male Connector MFL Thread
PART NO. MFLThread Qty / BoxTube O.D.
AMCF 0505 5/16 5/16 300AMCF 0604 3/8 1/4 300
AMCF 0507N 5/16 1/2 300AMCF 0607N 3/8 1/2 300
MCBB - Male Connector Big o-ring BSP(P) Thread
PART NO. BSP(P)Thread Qty / BoxTube O.D.
AMCBB 0602 3/8 1/8 300AMCBB 0604 3/8 1/4 300
MFL ThreadMFL 1/4 Corresponds to a 7/16 - 20 UNFMFL 5/16 Corresponds to a 1/2 - 20 UNFMFL 3/8 Corresponds to a 5/8 - 18 UNFMFL 1/2 Corresponds to a 3/4 - 16 UNF
MCW - Male Connector BSW Thread
PART NO. BSWThread Qty / BoxTube O.D.
AMCW 04 9/16 1/4 9/16 400AMCW 0507 5/16 1/2 250AMCW 05 9/16 5/16 9/16 250AMCW 0607 3/8 1/2 200AMCW 06 9/16 3/8 9/16 200
Part Numbering System
A MC 04 04 F - W
Acetal copolymer : A Polypropylene : PMaterial
01=5/32 , 03=3/16 , 04=1/4 , 05=5/16 , 06=3/8 , 07=1/2 , 08=5/8 , 10=7/8Tube O.D.(Stem O.D.)
Fitting Type
F : Flat type, C : Cone type, V : V-typeType(FA series)
White : W, Gray : GBody color
NPTF, BSP(P), BSPT, Thread Size : 02=1/8 , 04=1/4 ,06=3/8 , 07=1/2 , 08=5/8 , 09=3/4 , 11=1
UN, UNF, UNS(major diameter-threads per inch)
Tube O.D.Stem O.D.Power O.D.Thread Size
10 11
ACETAL FITTINGS (GRAY)
TEB - Tube Elbow Barb connector
PART NO. Tube I.D. Qty / BoxStem O.D.
ATEB 0404 1/4 1/4 800ATEB 0405 1/4 5/16 800ATEB 0504 5/16 1/4 800ATEB 0505 5/16 5/16 600ATEB 0604 3/8 1/4 600ATEB 0605 3/8 5/16 600ATEB 0606 3/8 3/8 550
TU - Tee Union
PART NO. TubeO.D. (B)
TubeO.D. (C)
Qty /Box
TubeO.D. (A)
ATU 010101 5/32 5/32 5/32 350ATU 030303 3/16 3/16 3/16 350ATU 040404 1/4 1/4 1/4 300ATU 050505 5/16 5/16 5/16 250ATU 060604 3/8 3/8 1/4 150ATU 060606 3/8 3/8 3/8 150ATU 070706 1/2 1/2 3/8 100ATU 070707 1/2 1/2 1/2 100
SA - Stem Adapter NPTF Thread
PART NO. NPTFThread Qty / BoxStem O.D.
ASA 0102 5/32 1/8 800ASA 0104 5/32 1/4 500ASA 0302 3/16 1/8 800ASA 0402 1/4 1/8 500ASA 0404 1/4 1/4 500ASA 0502 5/16 1/8 500ASA 0504 5/16 1/4 400ASA 0506 5/16 3/8 300ASA 0604 3/8 1/4 300ASA 0606 3/8 3/8 300ASA 0706 1/2 3/8 250ASA 0707 1/2 1/2 150
SABT - Stem Adapter BSPT(PT) Thread
PART NO. BSPT(PT)Thread Qty / BoxStem O.D.
ASABT 0302 3/16 1/8 800ASABT 0504 5/16 1/4 400ASABT 0506 5/16 3/8 300ASABT 0604 3/8 1/4 400ASABT 0606 3/8 3/8 300ASABT 0707 1/2 1/2 150
TBC - Tube Barb Connector
PART NO. Tube I.D. Qty / BoxStem O.D.
ATBC 0403 1/4 3/16 1000ATBC 0404 1/4 1/4 1000ATBC 0405 1/4 5/16 800ATBC 0503 5/16 3/16 700ATBC 0504 5/16 1/4 700ATBC 0505 5/16 5/16 700ATBC 0506 5/16 3/8 700ATBC 0604 3/8 1/4 500ATBC 0605 3/8 5/16 500ATBC 0606 3/8 3/8 400ATBC 0607 3/8 1/2 300ATBC 0706 1/2 3/8 300ATBC 0707 1/2 1/2 300
MTS - Male Tee Swivel NPTF Thread
PART NO. NPTFThread Qty / BoxTube O.D.
AMTS 0102 5/32 1/8 500AMTS 0104 5/32 1/4 400AMTS 0302 3/16 1/8 300AMTS 0402 1/4 1/8 250AMTS 0404 1/4 1/4 200AMTS 0502 5/16 1/8 200AMTS 0504 5/16 1/4 180AMTS 0506 5/16 3/8 150AMTS 0604 3/8 1/4 130AMTS 0606 3/8 3/8 100AMTS 0706 1/2 3/8 70AMTS 0707 1/2 1/2 70
FAUF - Female Adapter UNF Thread (V - Type)
PART NO. Qty / BoxUNFThreadTube O.D.
AFAUF 04 7/16V 1/4 7/16 - 20 400
AFAUF 05 7/16V 5/16 7/16 - 20 300
AFAUF 06 7/16V 3/8 7/16 - 20 300
AFAUF 06 5/8V 3/8 5/8 - 18 300
FAB - Female Adapter BSP(P) Thread (Flat Type)
PART NO. BSP(P)Thread Qty / BoxTube O.D.
AFAB 0508F 5/16 5/8 250AFAB 0607F 3/8 1/2 200AFAB 0608F 3/8 5/8 150AFAB 0706F 1/2 3/8 200AFAB 0707F 1/2 1/2 150AFAB 0708F 1/2 5/8 150
FAU - Female Adapter UNS Thread (Cone Type)
PART NO. UNSThread Qty / BoxTube O.D.
AFAU 04 7/16C 1/4 7/16 - 24 400AFAU 05 7/16C 5/16 7/16 - 24 350AFAU 06 7/16C 3/8 7/16 - 24 300
FAB - Female Adapter BSP(P) Thread (Cone Type)
PART NO. BSP(P)Thread Qty / BoxTube O.D.
AFAB 0406C 1/4 3/8 250AFAB 0407C 1/4 1/2 200AFAB 0506C 5/16 3/8 200AFAB 0507C 5/16 1/2 200AFAB 0606C 3/8 3/8 200AFAB 0607C 3/8 1/2 200AFAB 0608C 3/8 5/8 150AFAB 0708C 1/2 5/8 150
FAUF - Female Adapter UNF Thread (Cone Type)
PART NO. UNFThread Qty / BoxTube O.D.
AFAUF 04 7/16C 1/4 7/16 - 20 400AFAUF 05 7/16C 5/16 7/16 - 20 300AFAUF 06 7/16C 3/8 7/16 - 20 300
RD - ReDucer
PART NO. Stem O.D. Qty / BoxTube O.D.
ARD 0104 5/32 1/4 800ARD 0305 3/16 5/16 700ARD 0306 3/16 3/8 600ARD 0405 1/4 5/16 700ARD 0406 1/4 3/8 500ARD 0506 5/16 3/8 400ARD 0507 5/16 1/2 300ARD 0607 3/8 1/2 300
7/16 UNF Corresponds to a 1/4 MFL5/8 UNF Corresponds to a 3/8 MFL
SAW - Stem Adapter BSW Thread
PART NO. BSWThread Qty / BoxStem O.D.
ASAW 05 9/16 5/16 9/16 150ASAW 0 6 0 7 3/8 1/2 150ASAW 06 9/16 3/8 9/16 150
TEU - Tube Elbow Union
PART NO. Stem O.D. Qty / BoxTube O.D.
ATEU 0101 5/32 5/32 800ATEU 0303 3/16 3/16 600ATEU 0306 3/16 3/8 500ATEU 0404 1/4 1/4 500ATEU 0406 1/4 3/8 400ATEU 0505 5/16 5/16 400ATEU 0506 5/16 3/8 350ATEU 0606 3/8 3/8 250ATEU 0607 3/8 1/2 200ATEU 0707 1/2 1/2 200
FA - Female Adapter NPTF Thread
PART NO. Qty / BoxNPTFThreadTube O.D.
AFA 0402 1/4 1/8 400AFA 0404 1/4 1/4 400AFA 0502 5/16 1/8 300AFA 0504 5/16 1/4 300AFA 0602 3/8 1/8 300AFA 0604 3/8 1/4 300
FAUN - Female Adapter UN Thread (V - Type)
PART NO. Qty / BoxUNThreadTube O.D.
AFAUN 05 1/2V 5/16 1/2 - 16 350
AFAUN 06 1/2V 3/8 1/2 - 16 200
AFAUN 07 1/2V 1/2 1/2 - 16 150
1312
PL - PLug
PART NO. Stem O.D. Qty / Box
APL 01 5/32 1000APL 03 3/16 1000APL 04 1/4 1000APL 05 5/16 700APL 06 3/8 500APL 07 1/2 400
For maximum flexibility, fittings may becombined to provide wider functions.
Unlike some competitors' products, separationand reuse is easy.
Adaptability
BU - Bulkhead Union
PART NO. TubeO.D.
ThreadSize
Qty /Box
TubeO.D.
ABU 0101 5/32 5/32 M16XP1 300ABU 0303 3/16 3/16 M16XP1 300ABU 0404 1/4 1/4 M16XP1 250ABU 0406 1/4 3/8 M20XP1.5 200ABU 0505 5/16 5/16 M20XP1.5 150ABU 0604 3/8 1/4 M20XP1.5 150ABU 0606 3/8 3/8 M20XP1.5 150ABU 0707 1/2 1/2 M27XP1.5 70
UB - U Bend
PART NO. Tube O.D. Qty / BoxTube O.D.
AUB 0404 1/4 1/4 300AUB 0505 5/16 5/16 250AUB 0606 3/8 3/8 150AUB 0707 1/2 1/2 100
CR - CRoss
PART NO. Tube O.D. Qty / Box
ACR 0101 5/32 300ACR 0404 1/4 250ACR 0505 5/16 200ACR 0606 3/8 120ACR 0707 1/2 80
TES - Tube End Stop
PART NO. Tube O.D. Qty / Box
ATES 04 1/4 700ATES 05 5/16 600ATES 06 3/8 300ATES 07 1/2 300
ACETAL FITTINGS (GRAY)
THWD - THree Way Divider
PART NO. Tube O.D. Qty / BoxTube O.D.
ATHWD 0604 3/8 1/4 150ATHWD 0706 1/2 3/8 50
TWD - Two Way Divider
PART NO. Tube out Qty / BoxTube in
ATWD 0101 5/32 5/32 400ATWD 0404 1/4 1/4 300ATWD 0505 5/16 5/16 200ATWD 0605 3/8 5/16 150ATWD 0606 3/8 3/8 150ATWD 0607 3/8 1/2 100ATWD 0707 1/2 1/2 100
OC - Offset Connector
PART NO. Tube O.D. Qty / BoxTube O.D.
AOC 0604 3/8 1/4 300AOC 0705 1/2 5/16 200
MRS - Male Run Swivel NPTF Thread
PART NO. NPTFThread Qty / BoxTube O.D.
AMRS 0102 5/32 1/8 500AMRS 0104 5/32 1/4 400AMRS 0302 3/16 1/8 300AMRS 0402 1/4 1/8 300AMRS 0404 1/4 1/4 200AMRS 0502 5/16 1/8 200AMRS 0504 5/16 1/4 200AMRS 0506 5/16 3/8 150AMRS 0604 3/8 1/4 130AMRS 0606 3/8 3/8 100AMRS 0706 1/2 3/8 80AMRS 0707 1/2 1/2 80
UC - Union Connector
PART NO. Tube O.D. Qty / BoxTube O.D.
AUC 0101 5/32 5/32 500AUC 0303 3/16 3/16 500AUC 0401 1/4 5/32 500AUC 0403 1/4 3/16 400AUC 0404 1/4 1/4 400AUC 0501 5/16 5/32 400AUC 0503 5/16 3/16 400AUC 0504 5/16 1/4 300AUC 0505 5/16 5/16 300AUC 0601 3/8 5/32 300AUC 0603 3/8 3/16 300AUC 0604 3/8 1/4 250AUC 0605 3/8 5/16 250AUC 0606 3/8 3/8 250AUC 0705 1/2 5/16 200AUC 0706 1/2 3/8 200AUC 0707 1/2 1/2 150AUC 067.5 3/8 7.5 mm 250
DEU - Dispensing Elbow Union
PART NO. Stem O.D. Qty / BoxTube O.D.
ADEU 0606 3/8 3/8 250
DST - Dispensing STem
PART NO. Stem O.D. Qty / BoxStem O.D.
ADST 0606 3/8 3/8 400
MESBT - Male Elbow Swivel BSPT(PT) Thread
PART NO. BSPT(PT)Thread Qty / BoxTube O.D.
AMESBT 0104 5/32 1/4 400AMESBT 0302 3/16 1/8 400AMESBT 0304 3/16 1/4 300AMESBT 0306 3/16 3/8 300AMESBT 0404 1/4 1/4 250AMESBT 0406 1/4 3/8 200AMESBT 0407 1/4 1/2 200AMESBT 0504 5/16 1/4 200AMESBT 0506 5/16 3/8 200AMESBT 0507 5/16 1/2 150AMESBT 0606 3/8 3/8 150AMESBT 0607 3/8 1/2 100AMESBT 0707 1/2 1/2 100
1514
ACETAL FITTINGS (WHITE)
FAU - Female Adapter UNS Thread (Cone Type)
PART NO. UNSThread Qty / BoxTube O.D.
AFAU 04 7/16CW 1/4 7/16 - 24 400AFAU 05 7/16CW 5/16 7/16 - 24 350AFAU 06 7/16CW 3/8 7/16 - 24 300
FAB - Female Adapter BSP(P) Thread (Cone Type)
PART NO. BSP(P)Thread Qty / BoxTube O.D.
AFAB 0406CW 1/4 3/8 250AFAB 0407CW 1/4 1/2 200AFAB 0506CW 5/16 3/8 200AFAB 0507CW 5/16 1/2 200AFAB 0606CW 3/8 3/8 200AFAB 0607CW 3/8 1/2 200AFAB 0608CW 3/8 5/8 150AFAB 0708CW 1/2 5/8 150
FAB - Female Adapter BSP(P) Thread (Flat Type)
PART NO. Qty / BoxBSP(P)ThreadTube O.D.
AFAB 0508FW 5/16 5/8 250AFAB 0607FW 3/8 1/2 250AFAB 0608FW 3/8 5/8 150AFAB 0706FW 1/2 3/8 200AFAB 0707FW 1/2 1/2 150AFAB 0708FW 1/2 5/8 150
FA - Female Adapter NPTF Thread
PART NO. NPTFThread Qty / BoxTube O.D.
AFA 0402W 1/4 1/8 400AFA 0404W 1/4 1/4 400AFA 0502W 5/16 1/8 300AFA 0504W 5/16 1/4 300AFA 0602W 3/8 1/8 300AFA 0604W 3/8 1/4 300AFA 0807W 5/8 1/2 100AFA 0809W 5/8 3/4 100AFA 1009W 7/8 3/4 50AFA 1011W 7/8 1 40
TU - Tee Union
PART NO. TubeO.D. (B)
TubeO.D. (C)
Qty /Box
TubeO.D. (A)
ATU 010101W 5/32 5/32 5/32 350ATU 030303W 3/16 3/16 3/16 350ATU 040404W 1/4 1/4 1/4 300ATU 050505W 5/16 5/16 5/16 250ATU 060604W 3/8 3/8 1/4 150ATU 060606W 3/8 3/8 3/8 150ATU 070706W 1/2 1/2 3/8 100ATU 070707W 1/2 1/2 1/2 100ATU 080804W 5/8 5/8 1/4 50ATU 080807W 5/8 5/8 1/2 50ATU 080808W 5/8 5/8 5/8 50ATU 080810W 5/8 5/8 7/8 50ATU 100810W 7/8 5/8 7/8 20ATU 101008W 7/8 7/8 5/8 20ATU 100808W 7/8 5/8 5/8 50ATU 101010W 7/8 7/8 7/8 20
Suitable forWater & foods use : products are manufactured from safe, non-toxic materials
meeting the requirements of the US FDA, WRAS, ANSI/NSF-51, 61, andSK Zert. Our products are widely used in water purification,food/beverage and pneumatic systems.
Function & Quality : provides quick and convenient assembly - saving time &expense. Our ISO9001 registered quality system ensures our customersa superior level of product quality. Defects are easily detectable andmaintenance is easy with its easy dismantling for access.
Collet Design : Our unique oval collet design is superior and more practical, and is animprovement welcomed by our world-wide customers in all industries.
Applications : Beyond water and food use, fittings can be used with air, gases, vacuum,& liquids. And all connections can be assembled & disassembledrepeatedly. A broad of sizes covers a broad scope of applications.
Color: White (Acetal)
MC - Male Connector NPTF Thread
PART NO. NPTFThread Qty / BoxTube O.D.
AMC 0102W 5/32 1/8 500AMC 0104W 5/32 1/4 500AMC 0302W 3/16 1/8 500AMC 0402W 1/4 1/8 500AMC 0404W 1/4 1/4 500AMC 0406W 1/4 3/8 300AMC 0407W 1/4 1/2 200AMC 0502W 5/16 1/8 400AMC 0504W 5/16 1/4 400AMC 0506W 5/16 3/8 350AMC 0602W 3/8 1/8 300AMC 0604W 3/8 1/4 300AMC 0606W 3/8 3/8 250AMC 0607W 3/8 1/2 200AMC 0706W 1/2 3/8 200AMC 0707W 1/2 1/2 150AMC 0806W 5/8 3/8 80AMC 0807W 5/8 1/2 80AMC 1009W 7/8 3/4 40AMC 1011W 7/8 1 40
EU - Elbow Union
PART NO. Tube O.D. Qty / BoxTube O.D.
AEU 0101W 5/32 5/32 700AEU 0303W 3/16 3/16 700AEU 0404W 1/4 1/4 400AEU 0501W 5/16 5/32 500AEU 0503W 5/16 3/16 400AEU 0504W 5/16 1/4 300AEU 0505W 5/16 5/16 250AEU 0603W 3/8 3/16 300AEU 0604W 3/8 1/4 300AEU 0605W 3/8 5/16 200AEU 0606W 3/8 3/8 250AEU 0704W 1/2 1/4 150AEU 0705W 1/2 5/16 150AEU 0706W 1/2 3/8 150AEU 0707W 1/2 1/2 150AEU 0808W 5/8 5/8 100AEU 1008W 7/8 5/8 50AEU 1010W 7/8 7/8 50
ME - Male Elbow NPTF Thread
PART NO. NPTFThread Qty / BoxTube O.D.
AME 0302W 3/16 1/8 500AME 0402W 1/4 1/8 500AME 0404W 1/4 1/4 400AME 0406W 1/4 3/8 350AME 0504W 5/16 1/4 300AME 0506W 5/16 3/8 300AME 0604W 3/8 1/4 250AME 0606W 3/8 3/8 250AME 0706W 1/2 3/8 200AME 0707W 1/2 1/2 150AME 0806W 5/8 3/8 80AME 0807W 5/8 1/2 40
TTU - Tube Tee Union connector
PART NO. TubeO.D.
StemO.D.
Qty /Box
TubeO.D.
ATTU 080808W 5/8 5/8 5/8 50
FAUN - Female Adapter UN Thread (V - Type)
PART NO. UNThread Qty / BoxTube
O.D.AFAUN 05 1/2VW 5/16 1/2 - 16 350
AFAUN 06 1/2VW 3/8 1/2 - 16 200
AFAUN 07 1/2VW 1/2 1/2 - 16 150
FAUF - Female Adapter UNF Thread (Cone Type)
PART NO. UNFThread Qty / BoxTube O.D.
AFAUF 04 7/16CW 1/4 7/16 - 20 400
AFAUF 05 7/16CW 5/16 7/16 - 20 350
AFAUF 06 7/16CW 3/8 7/16 - 20 300
FAUF - Female Adapter UNF Thread (V - Type)
PART NO. UNFThread Qty / BoxTube O.D.
AFAUF 04 7/16VW 1/4 7/16 - 20 400
AFAUF 05 7/16VW 5/16 7/16 - 20 300
AFAUF 06 7/16VW 3/8 7/16 - 20 300
AFAUF 06 5/8VW 3/8 5/8 - 18 350
7/16 UNF Corresponds to a 1/4 MFL5/8 UNF Corresponds to a 3/8 MFL
MCB - Male Connector BSP(P) Thread
PART NO. BSP(P)Thread Qty / BoxTube O.D.
AMCB 0807W 5/8 1/2 100AMCB 0809W 5/8 3/4 100AMCB 1009W 7/8 3/4 50
16 17
ACETAL FITTINGS (WHITE)
SVA - Stop Valve Adapter UNEF Thread
PART NO. UNEFThread Qty / BoxTube O.D.
ASVA 04 9/16W 1/4 9/16-24 200ASVA 06 9/16W 3/8 9/16-24 150
For an undercounter filter systems
UB - U Bend
PART NO. Tube O.D. Qty / BoxTube O.D.
AUB 0404W 1/4 1/4 350AUB 0505W 5/16 5/16 250AUB 0606W 3/8 3/8 150AUB 0707W 1/2 1/2 100AUB 0808W 5/8 5/8 60AUB 1010W 7/8 7/8 40
SUC - Swivel Union Connector BSP(P) Thread
PART NO. BSP(P)Thread Qty / BoxTube O.D.
ASUC 0807W 5/8 1/2 50ASUC 0809W 5/8 3/4 50ASUC 1009W 7/8 3/4 40
TWD - Two Way Divider
PART NO. Tube out Qty / BoxTube in
ATWD 0101W 5/32 5/32 400ATWD 0404W 1/4 1/4 300ATWD 0505W 5/16 5/16 200ATWD 0605W 3/8 5/16 150ATWD 0606W 3/8 3/8 150ATWD 0607W 3/8 1/2 100ATWD 0707W 1/2 1/2 100
PL - PLug
PART NO. Stem O.D. Qty / BoxAPL 01W 5/32 1000APL 03W 3/16 1000APL 04W 1/4 1000APL 05W 5/16 700APL 06W 3/8 500APL 07W 1/2 400APL 08W 5/8 200APL 10W 7/8 100
THWD - THree Way Divider
PART NO. Qty / BoxTube O.D.Tube O.D.
ATHWD 0604W 3/8 1/4 150ATHWD 0706W 1/2 3/8 50
SEU - Swivel Elbow Union BSP(P) Thread
PART NO. BSP(P)Thread Qty / BoxTube O.D.
ASEU 0807W 5/8 1/2 50ASEU 0809W 5/8 3/4 50
BU - Bulkhead Union
PART NO. Qty /Box
TubeO.D.
ThreadSize
TubeO.D.
ABU 0101W 5/32 5/32 M16XP1 300ABU 0303W 3/16 3/16 M16XP1 300ABU 0404W 1/4 1/4 M16XP1 250ABU 0406W 1/4 3/8 M20XP1.5 200ABU 0505W 5/16 5/16 M20XP1.5 200ABU 0604W 3/8 1/4 M20XP1.5 150ABU 0606W 3/8 3/8 M20XP1.5 150ABU 0707W 1/2 1/2 M27XP1.5 70
CR - CRoss
PART NO. Tube O.D. Qty / Box
ACR 0101W 5/32 300ACR 0404W 1/4 250ACR 0505W 5/16 200ACR 0606W 3/8 120ACR 0707W 1/2 80
TES - Tube End Stop
PART NO. Qty / BoxTube O.D.
ATES 04W 1/4 800ATES 05W 5/16 600ATES 06W 3/8 300ATES 07W 1/2 300ATES 08W 5/8 100ATES 10W 7/8 50
SABT - Stem Adapter BSPT(PT) Thread
PART NO. BSPT(PT)Thread Qty / BoxStem O.D.
ASABT 0302W 3/16 1/8 800ASABT 0504W 5/16 1/4 400ASABT 0506W 5/16 3/8 300ASABT 0604W 3/8 1/4 400ASABT 0606W 3/8 3/8 300ASABT 0707W 1/2 1/2 150
UC - Union Connector
PART NO. Tube O.D. Qty / BoxTube O.D.
AUC 0101W 5/32 5/32 500AUC 0303W 3/16 3/16 500AUC 0404W 1/4 1/4 400AUC 0501W 5/16 5/32 400AUC 0503W 5/16 3/16 400AUC 0504W 5/16 1/4 300AUC 0505W 5/16 5/16 300AUC 0603W 3/8 3/16 300AUC 0604W 3/8 1/4 250AUC 0605W 3/8 5/16 250AUC 0606W 3/8 3/8 250AUC 0705W 1/2 5/16 200AUC 0706W 1/2 3/8 200AUC 0707W 1/2 1/2 150AUC 067.5W 3/8 7.5 (mm) 250AUC 0807W 5/8 1/2 100AUC 0808W 5/8 5/8 100AUC 1008W 7/8 5/8 50AUC 1010W 7/8 7/8 50
SA - Stem Adapter NPTF Thread
PART NO. NPTFThread Qty / BoxStem O.D.
ASA 0102W 5/32 1/8 800ASA 0104W 5/32 1/4 500ASA 0302W 3/16 1/8 800ASA 0402W 1/4 1/8 500ASA 0404W 1/4 1/4 500ASA 0502W 5/16 1/8 500ASA 0504W 5/16 1/4 400ASA 0506W 5/16 3/8 300ASA 0604W 3/8 1/4 300ASA 0606W 3/8 3/8 300ASA 0706W 1/2 3/8 250ASA 0707W 1/2 1/2 150
DA - Drain Adapter NPSH Thread
PART NO. NPSHThread Qty / BoxTube O.D.
ADA 0809W 5/8 3/4 50
MTU - Male Tee Union NPTF Thread
PART NO. NPTFThread Qty / BoxTube O.D.
AMTU 0404W 1/4 1/4 300
40.20mm
KFA - Kitchen Faucet Adapter NPSM Thread
PART NO. NPSMThread Qty / BoxTube O.D.
AKFA 0407W 1/4 1/2-14 100AKFA 0607W 3/8 1/2-14 100
For installingundercounterfilters & ROsystems
HA - Hub Adapter NPSH Thread
PART NO. NPSHThread Qty / BoxTube O.D.
AHA 1011W 7/8 1 400
TEU - Tube Elbow Union
PART NO. Stem O.D. Qty / BoxTube O.D.
ATEU 0101W 5/32 5/32 800ATEU 0303W 3/16 3/16 600ATEU 0306W 3/16 3/8 500ATEU 0404W 1/4 1/4 500ATEU 0406W 1/4 3/8 400ATEU 0505W 5/16 5/16 400ATEU 0506W 5/16 3/8 350ATEU 0606W 3/8 3/8 250ATEU 0607W 3/8 1/2 200ATEU 0707W 1/2 1/2 200ATEU 0808W 5/8 5/8 100ATEU 1010W 7/8 7/8 50
1918
Suitable forWater & foods use : products are manufactured from safe, non-toxic materials meeting
the requirements of the US FDA, WRAS, ANSI/NSF-51, 61, and SK Zert.Our products are widely used in water purification, food/beverage andpneumatic systems.
Function & Quality : provides quick and convenient assembly - saving time & expense.Our ISO9001 registered quality system ensures our customers a superiorlevel of product quality. Defects are easily detectable and maintenance iseasy with its easy dismantling for access.
Collet Design : Our unique oval collet design is superior and more practical, and is animprovement welcomed by our world-wide customers in all industries.
Applications : Beyond water and food use, fittings can be used with air, gases, vacuum, &liquids. And all connections can be assembled & disassembled repeatedly.A broad of sizes covers a broad scope of applications.
Color: Black (Acetal)
ACETAL FITTINGS (BLACK)ACETAL FITTINGS (WHITE)
BBC - BarB Connector
PART NO. Tube I.D. Qty / BoxTube O.D.
ABBC 0807W 5/8 1/2 100ABBC 1007W 7/8 1/2 50ABBC 1009W 7/8 3/4 40
FC - Filter Connector
PART NO. Tube O.D. Qty / BoxTube O.D.
AFC 0404W 1/4 1/4 300
EL - EnLarger
PART NO. Stem O.D. Qty / BoxTube O.D.
AEL 0605 3/8 5/16 400AEL 0706 1/2 3/8 300
FAN - Female Adapter NH Thread
PART NO. NHThread Qty / BoxTube O.D.
AFAN 0409F 1/4 3/4 100AFAN 0509F 5/16 3/4 100AFAN 0609F 3/8 3/4 100AFAN 0809F 5/8 3/4 50
PART NO. NHThread Qty / BoxTube O.D.
(mm)AFAN 0609FM 6 3/4 100AFAN 0809FM 8 3/4 100AFAN 1009FM 10 3/4 100
PART NO. BSP(P)Thread Qty / BoxTube O.D.
(mm)AFAB 0609FM 6 3/4 100AFAB 0809FM 8 3/4 100AFAB 1009FM 10 3/4 100
FAB - Female Adapter BSP(P) Thread
MCHV - Mini CHeck Valve NPTF Thread
PART NO. NPTFThread Qty / BoxTube O.D.
AMCHV 0402W 1/4 1/8 500
inlet
33.0mm
1kgf/cm2 - 980cc/min
PART NO. BSP(P)Thread Qty / BoxTube O.D.
AFAB 0409F 1/4 3/4 100AFAB 0509F 5/16 3/4 100AFAB 0609F 3/8 3/4 100AFAB 0809F 5/8 3/4 50
BFU - Both Female Union BSP(P) Thread
PART NO. BSP(P)Thread Qty / BoxBSP(P)
ThreadABFU 0409 1/4 3/4 100
Part Numbering System
A MC 04 04 MF - B
Acetal copolymer : AMaterials
04=4mm, 05=5mm, 06=6mm, 08=8mm, 10=10mm, 12=12mm, 15=15mm, 16=16mm, 18=18mm, 22=22mm, 28=28mmTube O.D.(Stem O.D.)
Fitting Type
Metric size
F : Flat type, C : Cone type, V : V-typeType(FA series)
Black : BBody color
NPTF, BSP(P), BSPT, PT Thread No. : 02=1/8 , 04=1/4 ,06=3/8 , 07=1/2 , 08=5/8 , 09=3/4 , 11=1
UN, UNF, UNS(major diameter-threads per inch)
Tube O.D.Stem O.D.Power O.D.Thread Size
ME - Male Elbow BSPT(PT) Thread
PART NO. BSPT(PT)Thread Qty / BoxTube O.D.
(mm)AME 0602M 6 1/8 500AME 0604M 6 1/4 400AME 0606M 6 3/8 400AME 0804M 8 1/4 300AME 0806M 8 3/8 300AME 1004M 10 1/4 250AME 1006M 10 3/8 250AME 1206M 12 3/8 200AME 1207M 12 1/2 150AME 1506M 15 3/8 100AME 1507M 15 1/2 100AME 1606M 16 3/8 100AME 1607M 16 1/2 100
MES - Male Elbow Swivel BSPT(PT) Thread
PART NO. Qty / BoxBSPT(PT)Thread
Tube O.D.(mm)
AMES 0402M 4 1/8 500AMES 0404M 4 1/4 400AMES 0502M 5 1/8 500AMES 0602M 6 1/8 300AMES 0802M 8 1/8 200AMES 0804M 8 1/4 200AMES 0806M 8 3/8 200AMES 1004M 10 1/4 150AMES 1006M 10 3/8 150AMES 1206M 12 3/8 100AMES 1207M 12 1/2 100
RD - ReDucer
PART NO. Stem O.D. Qty / BoxTube O.D.
ARD 0104W 5/32 1/4 800ARD 0305W 3/16 5/16 700ARD 0306W 3/16 3/8 600ARD 0405W 1/4 5/16 700ARD 0406W 1/4 3/8 500ARD 0408W 1/4 5/8 300ARD 0506W 5/16 3/8 400ARD 0507W 5/16 1/2 300ARD 0607W 3/8 1/2 300
BMC - Brass Male Connector BSP(P) Thread
PART NO. MetricThread Qty / BoxTube O.D.
BMC 04M10 1/4 M10 500BMC 06M10 3/8 M10 500
PART NO. BSP(P)Thread Qty / BoxTube O.D.
(mm)BMCB 1004M 10 1/4 500
1. Chrome plating is by special request.2. Manufactured after receipt of order.
BFAUF - Brass Female Adapter UNF Thread
PART NO. UNFThread Qty / BoxTube
O.D.BFAUF 04 7/16V 1/4 7/16-20 400BFAUF 06 7/16V 3/8 7/16-20 300BFAUF 06 5/8V 3/8 5/8-18 250
7/16 UNF corresponds to a 1/4 MFL5/8 UNF corresponds to a 3/8 MFL
1. Chrome plating is by special request.2. Manufactured after receipt of order.
20 21
ACETAL FITTINGS (BLACK)
RD - ReDucer
PART NO. Stem O.D.(mm) Qty / BoxTube O.D.
(mm)ARD 0405M 4 5 800ARD 0406M 4 6 800ARD 0408M 4 8 700ARD 0506M 5 6 700ARD 0508M 5 8 700ARD 0608M 6 8 600ARD 0610M 6 10 500ARD 0810M 8 10 400ARD 0812M 8 12 300ARD 1012M 10 12 300ARD 1015M 10 15 250ARD 1215M 12 15 200ARD 1518M 15 18 150ARD 1522M 15 22 100ARD 1618M 16 18 150ARD 1622M 16 22 150ARD 1822M 18 22 80ARD 2228M 22 28 50
MESB - Male Elbow Swivel BSP(P) Thread
PART NO. BSP(P)Thread Qty / BoxTube O.D.
(mm)AMESB 0402M 4 1/8 500AMESB 0404M 4 1/4 500AMESB 0502M 5 1/8 400AMESB 0504M 5 1/4 300AMESB 0602M 6 1/8 300AMESB 0604M 6 1/4 200AMESB 0802M 8 1/8 200AMESB 0804M 8 1/4 150AMESB 0806M 8 3/8 150AMESB 1004M 10 1/4 140AMESB 1006M 10 3/8 140AMESB 1007M 10 1/2 100AMESB 1206M 12 3/8 90AMESB 1207M 12 1/2 80
MCB - Male Connector BSP(P) Thread
PART NO. Qty / BoxBSP(P)Thread
Tube O.D.(mm)
AMCB 0402M 4 1/8 500AMCB 0404M 4 1/4 400AMCB 0502M 5 1/8 400AMCB 0504M 5 1/4 400AMCB 0602M 6 1/8 400AMCB 0604M 6 1/4 400AMCB 0802M 8 1/8 400AMCB 0804M 8 1/4 400AMCB 0806M 8 3/8 250AMCB 0807M 8 1/2 200AMCB 1004M 10 1/4 300AMCB 1006M 10 3/8 250AMCB 1007M 10 1/2 200AMCB 1206M 12 3/8 200AMCB 1207M 12 1/2 150AMCB 1507M 15 1/2 80AMCB 1509M 15 3/4 80AMCB 1607M 16 1/2 80AMCB 1609M 16 3/4 80AMCB 2209M 22 3/4 80
MC - Male Connector BSPT(PT) Thread
PART NO. BSPT(PT)Thread Qty / BoxTube O.D.
(mm)AMC 0402M 4 1/8 500AMC 0404M 4 1/4 500AMC 0502M 5 1/8 500AMC 0504M 5 1/4 500AMC 0602M 6 1/8 400AMC 0604M 6 1/4 500AMC 0606M 6 3/8 300AMC 0607M 6 1/2 250AMC 0802M 8 1/8 400AMC 0804M 8 1/4 400AMC 0806M 8 3/8 350AMC 1002M 10 1/8 300AMC 1004M 10 1/4 300AMC 1006M 10 3/8 300AMC 1007M 10 1/2 200AMC 1206M 12 3/8 200AMC 1207M 12 1/2 200AMC 1506M 15 3/8 80AMC 1507M 15 1/2 80AMC 1606M 16 3/8 80AMC 1607M 16 1/2 80AMC 1807M 18 1/2 80AMC 2209M 22 3/4 40AMC 2211M 22 1 40
EU - Elbow Union
PART NO. Qty / BoxTube O.D.(mm)
Tube O.D.(mm)
AEU 0404M 4 4 700AEU 0505M 5 5 700AEU 0606M 6 6 400AEU 0804M 8 4 500AEU 0805M 8 5 400AEU 0806M 8 6 300AEU 0808M 8 8 300AEU 1005M 10 5 300AEU 1006M 10 6 300AEU 1008M 10 8 200AEU 1010M 10 10 200AEU 1206M 12 6 150AEU 1208M 12 8 150AEU 1210M 12 10 150AEU 1212M 12 12 150AEU 1515M 15 15 80AEU 1616M 16 16 80AEU 1818M 18 18 60AEU 2215M 22 15 50AEU 2216M 22 16 50AEU 2222M 22 22 40AEU 2828M 28 28 20
Qty / BoxTube O.D.(mm) Stem O.D.PART NO.
ATEU 16M08 16 5/8 100
FA - Female Adapter BSPT(PT) Thread
PART NO. BSPT(PT)Thread Qty / BoxTube O.D.
(mm)AFA 0602M 6 1/8 500AFA 0604M 6 1/4 400AFA 0802M 8 1/8 300AFA 0804M 8 1/4 300AFA 1002M 10 1/8 300AFA 1004M 10 1/4 300AFA 1507M 15 1/2 100AFA 1509M 15 3/4 100AFA 1607M 16 1/2 100AFA 1609M 16 3/4 100AFA 2209M 22 3/4 50AFA 2211M 22 1 40
TEU - Tube Elbow Union
PART NO. Stem O.D.(mm) Qty / BoxTube O.D.
(mm)ATEU 0404M 4 4 500ATEU 0505M 5 5 500ATEU 0606M 6 6 500ATEU 0610M 6 10 400ATEU 0806M 8 6 400ATEU 0808M 8 8 400ATEU 0810M 8 10 350ATEU 1010M 10 10 250ATEU 1212M 12 12 200ATEU 1515M 15 15 100ATEU 2222M 22 22 80
FAB - Female Adapter BSP(P) Thread
PART NO. BSP(P)Thread Qty / BoxTube O.D.
(mm)AFAB 1507M 15 1/2 100AFAB 1509M 15 3/4 100AFAB 1607M 16 1/2 100AFAB 1609M 16 3/4 100AFAB 2209M 22 3/4 40
FAUN - Female Adapter UN Thread (V - Type)
PART NO. UNThread Qty / BoxTube O.D.
(mm)AFAUN 08 1/2VM 8 1/2 - 16 350AFAUN 10 1/2VM 10 1/2 - 16 200AFAUN 12 1/2VM 12 1/2 - 16 200
FAB - Female Adapter BSP(P) Thread (Cone Type)
PART NO. BSP(P)Thread Qty / BoxTube O.D.
(mm)AFAB 0606CM 6 3/8 200AFAB 0607CM 6 1/2 200AFAB 0806CM 8 3/8 150AFAB 0807CM 8 1/2 200AFAB 1006CM 10 3/8 200AFAB 1007CM 10 1/2 200AFAB 1008CM 10 5/8 150AFAB 1208CM 12 5/8 150
FAUF - Female Adapter UNF Thread (Cone Type)
PART NO. UNFThread Qty / BoxTube O.D.
(mm)AFAUF 06 7/16CM 6 7/16 - 20 400AFAUF 08 7/16CM 8 7/16 - 20 300AFAUF 10 7/16CM 10 7/16 - 20 300
FAU - Female Adapter UNS Thread (Cone Type)
PART NO. UNSThread Qty / BoxTube O.D.
(mm)AFAU 06 7/16CM 6 7/16 - 24 400AFAU 08 7/16CM 8 7/16 - 24 350AFAU 10 7/16CM 10 7/16 - 24 300
Stem O.D. Qty / BoxTube O.D.(mm)PART NO.
AEL 15M07 15 1/2 150AEL 16M07 16 1/2 150AEL 18M07 18 1/2 150
EL - EnLarger
PART NO. Stem O.D.(mm) Qty / BoxTube O.D.
(mm)AEL 1510M 15 10 200AEL 1512M 15 12 150AEL 1610M 16 10 200AEL 1612M 16 12 150AEL 2215M 22 15 60AEL 2822M 28 22 50
PART NO. Tube O.D.(B)
Tube O.D.(C)
Qty /Box
Tube O.D.(A) (mm)
ATU 15M0606 15 3/8 3/8 50ATU 1616M07 16 16(mm) 1/2 20ATU 18M0606 18 3/8 3/8 20
2322
MRS - Male Run Swivel BSPT(PT) Thread
PART NO. Qty / BoxBSPT(PT)Thread
Tube O.D.(mm)
AMRS 0402M 4 1/8 500AMRS 0404M 4 1/4 400AMRS 0502M 5 1/8 300AMRS 0504M 5 1/4 300AMRS 0602M 6 1/8 250AMRS 0802M 8 1/8 200AMRS 0804M 8 1/4 200AMRS 0806M 8 3/8 150AMRS 1004M 10 1/4 130AMRS 1006M 10 3/8 100AMRS 1007M 10 1/2 100AMRS 1206M 12 3/8 80AMRS 1207M 12 1/2 80
MRSB - Male Run Swivel BSP(P) Thread
PART NO. BSP(P)Thread Qty / BoxTube O.D.
(mm)AMRSB 0402M 4 1/8 450AMRSB 0404M 4 1/4 350AMRSB 0502M 5 1/8 300AMRSB 0504M 5 1/4 250AMRSB 0602M 6 1/8 250AMRSB 0604M 6 1/4 200AMRSB 0802M 8 1/8 200AMRSB 0804M 8 1/4 150AMRSB 0806M 8 3/8 150AMRSB 1004M 10 1/4 130AMRSB 1006M 10 3/8 100AMRSB 1007M 10 1/2 100AMRSB 1206M 12 3/8 80AMRSB 1207M 12 1/2 80
MTSB - Male Tee Swivel BSP(P) Thread
PART NO. BSP(P)Thread Qty / BoxTube O.D.
(mm)AMTSB 0402M 4 1/8 450AMTSB 0404M 4 1/4 350AMTSB 0502M 5 1/8 300AMTSB 0504M 5 1/4 250AMTSB 0602M 6 1/8 250AMTSB 0604M 6 1/4 200AMTSB 0802M 8 1/8 200AMTSB 0804M 8 1/4 150AMTSB 0806M 8 3/8 150AMTSB 1004M 10 1/4 130AMTSB 1006M 10 3/8 100AMTSB 1007M 10 1/2 100AMTSB 1206M 12 3/8 80AMTSB 1207M 12 1/2 80
FAB - Female Adapter BSP(P) Thread (Flat Type)
PART NO. BSP(P)Thread Qty / BoxTube
O.D.(mm)AFAB 0808FM 8 5/8 250AFAB 1004FM 10 1/4 200AFAB 1007FM 10 1/2 150AFAB 1008FM 10 5/8 150AFAB 1206FM 12 3/8 150AFAB 1207FM 12 1/2 150AFAB 1208FM 12 5/8 150
OC - Offset Connector
PART NO. Qty / BoxTubeO.D.(mm)
TubeO.D.(mm)
AOC 1006M 10 6 400AOC 1208M 12 8 200
ACETAL FITTINGS (BLACK)
HA - Hub Adapter NPSH Thread
PART NO. NPSHThread Qty / BoxTube O.D.
(mm)AHA 2211M 22 1 40
SAB - Stem Adapter BSP(P) Thread
PART NO. Qty / BoxBSP(P)Thread
Stem O.D.(mm)
ASAB 0402M 4 1/8 900ASAB 0404M 4 1/4 600ASAB 0502M 5 1/8 600ASAB 0504M 5 1/4 500ASAB 0602M 6 1/8 500ASAB 0604M 6 1/4 400ASAB 0802M 8 1/8 500ASAB 0804M 8 1/4 400ASAB 0806M 8 3/8 250ASAB 1004M 10 1/4 250ASAB 1006M 10 3/8 250ASAB 1007M 10 1/2 150ASAB 1206M 12 3/8 150ASAB 1207M 12 1/2 150ASAB 1506M 15 3/8 180ASAB 1507M 15 1/2 180ASAB 1807M 18 1/2 100ASAB 2207M 22 1/2 80ASAB 2209M 22 3/4 80
CR - CRoss
PART NO. TubeO.D.(mm) Qty / Box
ACR 0404M 4 300ACR 0606M 6 250ACR 0808M 8 200ACR 1010M 10 120ACR 1212M 12 80
SA - Stem Adapter BSPT(PT) Thread
PART NO. Qty / BoxBSPT(PT)Thread
Stem O.D.(mm)
ASA 0402M 4 1/8 800ASA 0404M 4 1/4 500ASA 0502M 5 1/8 800ASA 0504M 5 1/4 500ASA 0602M 6 1/8 500ASA 0604M 6 1/4 500ASA 0802M 8 1/8 500ASA 0804M 8 1/4 400ASA 0806M 8 3/8 300ASA 1004M 10 1/4 400ASA 1006M 10 3/8 300ASA 1007M 10 1/2 250ASA 1206M 12 3/8 250ASA 1207M 12 1/2 150
MTS - Male Tee Swivel BSPT(PT) Thread
PART NO. Qty / BoxBSPT(PT)Thread
Tube O.D.(mm)
AMTS 0402M 4 1/8 500AMTS 0404M 4 1/4 400AMTS 0502M 5 1/8 300AMTS 0504M 5 1/4 250AMTS 0602M 6 1/8 250AMTS 0802M 8 1/8 200AMTS 0804M 8 1/4 180AMTS 0806M 8 3/8 150AMTS 1004M 10 1/4 130AMTS 1006M 10 3/8 100AMTS 1007M 10 1/2 100AMTS 1206M 12 3/8 70AMTS 1207M 12 1/2 70
BU - Bulkhead Union
PART NO. Qty /Box
Tube O.D.(mm)
ThreadSize
Tube O.D.(mm)
ABU 0404M 4 4 M16XP1 300ABU 0505M 5 5 M16XP1 300ABU 0606M 6 6 M16XP1 250ABU 0610M 6 10 M20XP1.5 200ABU 0808M 8 8 M20XP1.5 200ABU 1006M 10 6 M20XP1.5 150ABU 1010M 10 10 M20XP1.5 150ABU 1212M 12 12 M27XP1.5 70
THWD - THree Way Divider
PART NO. Qty / BoxTube O.D.(mm)
Tube O.D.(mm)
ATHWD 1006M 10 6 150
ATHWD 1210M 12 10 50
TU - Tee Union
PART NO. Tube O.D.(B) (mm)
Tube O.D.(C) (mm)
Qty /Box
Tube O.D.(A) (mm)
ATU 040404M 4 4 4 300ATU 050505M 5 5 5 350ATU 060606M 6 6 6 300ATU 080808M 8 8 8 250ATU 101006M 10 10 6 150ATU 101010M 10 10 10 150ATU 121210M 12 12 10 100ATU 121212M 12 12 12 100ATU 121012M 12 10 12 100ATU 151010M 15 10 10 50ATU 151510M 15 15 10 50ATU 151512M 15 15 12 50ATU 151515M 15 15 15 50ATU 151522M 15 15 22 50ATU 161616M 16 16 16 50ATU 161622M 16 16 22 50ATU 181815M 18 18 15 30ATU 181816M 18 18 16 30ATU 181818M 18 18 18 30ATU 221515M 22 15 15 20ATU 222210M 22 22 10 20ATU 222215M 22 22 15 20ATU 221616M 22 16 16 20ATU 222216M 22 22 16 20ATU 222222M 22 22 22 20ATU 282828M 28 28 28 10
TWD - Two Way Divider
PART NO. Tube out(mm) Qty / BoxTube in
(mm)ATWD 0404M 4 4 400ATWD 0606M 6 6 300ATWD 0808M 8 8 200ATWD 1008M 10 8 150ATWD 1010M 10 10 150ATWD 1012M 10 12 100ATWD 1212M 12 12 100
UB - U Bend
PART NO. Qty / BoxTube O.D(mm)
Tube O.D(mm)
AUB 0606M 6 6 350AUB 0808M 8 8 250AUB 1010M 10 10 150AUB 1212M 12 12 100AUB 1515M 15 15 60AUB 1616M 16 16 60AUB 2222M 22 22 40
FAUF - Female Adapter UNF Thread (V - Type)
PART NO. Qty / BoxUNFThread
Tube O.D.(mm)
AFAUF 06 7/16VM 6 7/16 - 20 400AFAUF 08 7/16VM 8 7/16 - 20 300AFAUF 10 7/16VM 10 7/16 - 20 300AFAUF 10 5/8VM 10 5/8 - 18 350
PART NO. Qty / BoxTube I.D.(mm)
Tube O.D.(mm)
ABBC 1210M 12 10 200ABBC 1510M 15 10 150ABBC 1610M 16 10 150
2524
ACETAL FITTINGS (BLACK)
PL - PLug
PART NO. Stem O.D.(mm) Qty / Box
APL 04M 4 1000APL 05M 5 1000APL 06M 6 1000APL 08M 8 700APL 10M 10 500APL 12M 12 400APL 15M 15 400APL 18M 18 400APL 22M 22 400
TBC - Tube Barb Connector
PART NO. Qty / BoxTube I.D.(mm)
Stem O.D.(mm)
ATBC 0604M 6 4 1000ATBC 0606M 6 6 800ATBC 0806M 8 6 700ATBC 1008M 10 8 500ATBC 1010M 10 10 500ATBC 1210M 12 10 300
SUC - Swivel Union Connector BSP(P) Thread
PART NO. Qty / BoxBSP(P)Thread
Tube O.D.(mm)
ASUC 1507M 15 1/2 100ASUC 1509M 15 3/4 100ASUC 1607M 16 1/2 80ASUC 1609M 16 3/4 50ASUC 2209M 22 3/4 40
UC - Union Connector
PART NO. Qty / BoxTube O.D.(mm)
Tube O.D.(mm)
AUC 0404M 4 4 500AUC 0505M 5 5 500AUC 0604M 6 4 500AUC 0605M 6 5 400AUC 0606M 6 6 400AUC 0804M 8 4 400AUC 0805M 8 5 300AUC 0806M 8 6 300AUC 0808M 8 8 300AUC 1004M 10 4 300AUC 1005M 10 5 300AUC 1006M 10 6 250AUC 1008M 10 8 250AUC 1010M 10 10 250AUC 1208M 12 8 200AUC 1210M 12 10 200AUC 1212M 12 12 200AUC 1510M 15 10 100AUC 1512M 15 12 100AUC 1515M 15 15 100AUC 1612M 16 12 100AUC 1615M 16 15 100AUC 1616M 16 16 100AUC 1818M 18 18 60AUC 2215M 22 15 50AUC 2216M 22 16 50AUC 2222M 22 22 50AUC 2828M 28 28 40
TES - Tube End Stop
PART NO. Tube O.D.(mm) Qty / Box
ATES 06M 6 800ATES 08M 8 600ATES 10M 10 300ATES 12M 12 200ATES 15M 15 100ATES 16M 16 100ATES 18M 18 50ATES 22M 22 50
SEU - Swivel Elbow Union BSP(P) Thread
PART NO. Qty / BoxBSP(P)Thread
Tube O.D.(mm)
ASEU 1507M 15 1/2 50ASEU 1509M 15 3/4 50ASEU 1607M 16 1/2 50ASEU 1609M 16 3/4 50
TC - Tank Connector
PART NO. Qty / BoxThreadSize
Tube O.D.(mm)
ATC 15M 15 M30XP3.5 30ATC 22M 22 M39XP3.5 20ATC 28M 28 M39XP2.0 10
PART NO. Qty / BoxTube O.D.Tube O.D.(mm)
AUC 15M07 15 1/2 100
BBC - BarB Connetor
PART NO. Qty / BoxTube I.D.Tube O.D.(mm)
ABBC 1507M 15 1/2 150ABBC 1607M 16 1/2 150ABBC 2207M 22 1/2 80ABBC 2209M 22 3/4 80
SFCB - Staight Female Connetor BSP(P) Thread
PART NO. Qty / BoxBSP(P)Thread
Tube O.D.(mm)
ASFCB 1507M 15 1/2 50
ASFCB 1509M 15 3/4 50
ASFCB 2209M 22 3/4 40
FWC - Four Way Connetor
PART NO. Qty / BoxTube O.D.(mm)
Tube O.D.(mm)
AFWC 2210M 22 10 50
EFCB - Elbow Female Connector BSP(P) Thread
PART NO. Qty / BoxBSP(P)Thread
Tube O.D.(mm)
AEFCB 1507M 15 1/2 50
DCHV - Double CHeck Valve
PART NO. Qty / BoxTube O.D.(mm)
Tube O.D.(mm)
ADCHV 1515M 15 15 100
SSA - Stem to Stem Adapter
PART NO. Qty / BoxStem O.D.Stem O.D.(mm)
ASSA 15M06 15 3/8 350
DA - Drain Adapter NPSH Thread
PART NO. Qty / BoxNPSHThread
Tube O.D.(mm)
ADA 1509M 15 3/4 50ADA 1609M 16 3/4 50
The unique oval-shaped collet is easier to grip,facilitating connecting and disconnecting.
The rounded stainless teeth minimize scratcheson the tube, allowing more frequent re-use.
Special desi
gn
2726
PSEU - Power Elbow Union (Single)
PART NO. TubeO.D (mm)
Qty /Box
PowerO.D (mm)
APSEU 0808M 8 8 250APSEU 0810M 8 10 250APSEU 1006M 10 6 300APSEU 1008M 10 8 250APSEU 1010M 10 10 250
PSUC - Power Union Connector (Single)
PART NO. TubeO.D (mm)
Qty /Box
PowerO.D (mm)
APSUC 0808M 8 8 300APSUC 0810M 8 10 250APSUC 1006M 10 6 250APSUC 1008M 10 8 250APSUC 1010M 10 10 250
PBEU - Power Elbow Union (Both)
PART NO. PowerO.D (mm)
Qty /Box
PowerO.D (mm)
APBEU 0808M 8 8 250APBEU 1008M 10 8 250APBEU 1010M 10 10 250
PBUC - Power Union Connector (Both)
PART NO. PowerO.D (mm)
Qty /Box
PowerO.D (mm)
APBUC 0808M 8 8 250APBUC 1010M 10 10 250
PMCF - Power Male Connector MFL Thread
PART NO. PowerO.D (mm)
Qty /Box
MFLThread
APMCF 0804M 8 1/4 40APMCF 0806M 8 3/8 350
7/16-20 UNF correspords to a 1/4 MFL5/8-18 UNF correspords to a 3/8 MFL
PMCW - Power Male Connector BSW Thread
PART NO. PowerO.D (mm)
Qty /Box
BSWThread
APMCW 08 9/16M 8 9/16-24 400APMCW 10 9/16M 10 9/16-24 350
PMCBT - Power Male Connector BSPT(PT) Thread
PART NO. PowerO.D (mm)
Qty /Box
BSPT(PT)Thread
APMCBT 0804M 8 1/4 400
FeaturesSpecially manufactured fittings that can be used with stainless material or otherplated material.
When tightening the cap nut, the o-ring adheres better for complete sealing.
By inserting 2 O-rings, water leakage is prevented.
The cap nut can be turned with the hand to tighten the collets. This preventsseparation of the tube.
Color / Inch size : White (Acetal)Metric size : Black (Acetal)
Cap-nut
Body
O-Ring(NBR)
Collets
Collets
Tube
SUS PipeConstruction
PSEU - Power Elbow Union (Single)
PART NO. TubeO.D
Qty /Box
PowerO.D
APSEU 0505 5/16 5/16 250APSEU 0506 5/16 3/8 250APSEU 0604 3/8 1/4 300APSEU 0605 3/8 5/16 250APSEU 0606 3/8 3/8 250
PMCW - Power Male Connector BSW Thread
PART NO. PowerO.D
Qty /Box
BSWThread
APMCW 05 9/16 5/16 9/16-24 350APMCW 06 9/16 3/8 9/16-24 300
PSUC - Power Union Connector (Single)
PART NO. TubeO.D
Qty /Box
PowerO.D
APSUC 0505 5/16 5/16 300APSUC 0506 5/16 3/8 250APSUC 0604 3/8 1/4 250APSUC 0605 3/8 5/16 250APSUC 0606 3/8 3/8 250
PBUC - Power Union Connector (Both)
PART NO. PowerO.D
Qty /Box
PowerO.D
APBUC 0505 5/16 5/16 250APBUC 0606 3/8 3/8 250
PMCBT - Power Male Connector BSPT(PT) Thread
PART NO. PowerO.D
Qty /Box
BSPT(PT)Thread
APMCBT 0504 5/16 1/4 400
PSFBU - Power Flow Bend Union (Single)
PART NO. PowerO.D
Qty /Box
TubeO.D
APSFBU 0505 5/16 5/16
PMCF - Power Male Connector MFL Thread
PART NO. PowerO.D
Qty /Box
MFLThread
APMCF 0504 5/16 1/4 400APMCF 0506 5/16 3/8 250
PBBC - Power BarB Connector
PART NO. PowerO.D
Qty /Box
TubeI.D
APBBC 0404 1/4 1/4 400APBBC 0504 5/16 1/4 400APBBC 0604 3/8 1/4 250
7/16-20 UNF correspords to a 1/4 MFL5/8-18 UNF correspords to a 3/8 MFL
ACETAL POWER FITTINGS [Inch/Metric Size]for use with Stainless Steel Tube
PBEU - Power Elbow Union (Both)
PART NO. PowerO.D
Qty /Box
PowerO.D
APBEU 0505 5/16 5/16 250APBEU 0605 3/8 5/16 250APBEU 0606 3/8 3/8 200
Convenient for separating powerfittings.
PSP - Power SPanner (Nylon)Tube O.D.PART NO.
NPSP 5/16, 3/8
28 29
CLEAN FITTINGS [Inch] POLYPROPYLENE FITTINGS
CIMCW - Clean fitting Male Connector BSW Thread
PART NO. PowerO.D
Qty /Box
BSWThread
ACIMCW 05 9/16 5/16 9/16-24 400ACIMCW 06 9/16 3/8 9/16-24 350
CIBEU - Clean fitting Elbow Union (Both)
PART NO. PowerO.D
Qty /Box
PowerO.D
ACIBEU 0505 5/16 5/16 250ACIBEU 0605 3/8 5/16 250ACIBEU 0606 3/8 3/8 250
CIBUC - Clean fitting Union Connector (Both)
PART NO. PowerO.D
Qty /Box
PowerO.D
ACIBUC 0505 5/16 5/16 250ACIBUC 0606 3/8 3/8 250
CIMCBT - Clean fitting Male Connector BSPT(PT) Thread
PART NO. PowerO.D
Qty /Box
BSPT(PT)Thread
ACIMCBT 0504 5/16 1/4 400
CIMCF - Clean fitting Male Connector MFL Thread
PART NO. PowerO.D
Qty /Box
MFLThread
ACIMCF 0504 5/16 1/4 400ACIMCF 0506 5/16 3/8 350
7/16-20 UNF correspords to a 1/4 MFL5/8-18 UNF correspords to a 3/8 MFL
FeaturesNo ‘BUG-TRAP’ area associated with all push fit connectors.
Drastic improvement reducing microbiological growth.
Double sealing design for all connections incorporating tube end seal.
No movement between fitting and pipe.
Visual confirmation of correctly assembled joint.
Technology cantranslate to work with your components such as taps, chiller,dispensor, etc.,
No tool application to make and break the joint.
Totally interchangeable with current product ranges
SUS PipeConstruction
Collets
Cap-nut
Clean Ring
O-Ring(NBR)
O-Ring(NBR)
Collets
Cap-nut
Body
Tube
Suitable forWater & foods use : products are manufactured from safe, non-toxic materials meeting the
requirements of the US FDA, WRAS, ANSI/NSF-51, 61, and SK Zert. Our products are widelyused in water purification, food/beverage and pneumatic systems.
Function & Quality : provides quick and convenient assembly - saving time & expense. Our ISO9001registered quality system ensures our customers a superior level of product quality. Defectsare easily detectable and maintenance is easy with its easy dismantling for access.
Collet Design : Our unique oval collet design is superior and more practical, and is an improvementwelcomed by our world-wide customers in all industries.
Applications : Beyond water and food use, fittings can be used with air, gases, vacuum, & liquids. And allconnections can be assembled & disassembled repeatedly. A broad of sizes covers a broadscope of applications.
Color : White polypropylene
Working Pressure and Temperature
MC - Male Connector NPTF Thread
PART NO. Qty / BoxNPTFThreadTube O.D.
PMC 0402 1/4 1/8 500PMC 0404 1/4 1/4 500PMC 0604 3/8 1/4 300PMC 0606 3/8 3/8 300
ME - Male Elbow NPTF Thread
PART NO. NPTFThread Qty / BoxTube O.D.
PME 0402 1/4 1/8 500PME 0404 1/4 1/4 400PME 0406 1/4 3/8 400PME 0604 3/8 1/4 250PME 0606 3/8 3/8 250
EU - Elbow Union
PART NO. Qty / BoxTube O.D.Tube O.D.
PEU 0404 1/4 1/4 400PEU 0606 3/8 3/8 250PEU 0707 1/2 1/2 150
FAU - Female Adapter UNS Thread(Cone Type)
PART NO. UNSThread Qty / BoxTube O.D.
PFAU 047/16C 1/4 7/16-24 400
PFAU 067/16C 3/8 7/16-24 200
Pressure
Temperature
10bar
1 35 ~ 20 70
4bar
65 150
On order - production basis
3130
TU - Tee Union
PART NO. TubeO.D. (B)
TubeO.D. (C)
Qty /Box
TubeO.D. (A)
PTU 040404 1/4 1/4 1/4 350PTU 060606 3/8 3/8 3/8 150PTU 070707 1/2 1/2 1/2 100
UC - Union Connector
PART NO. Qty / BoxTube O.D. Tube O.D.
PUC 0404 1/4 1/4 400PUC 0505 5/16 5/16 300PUC 0606 3/8 3/8 250PUC 0707 1/2 1/2 150
TEU - Tube Elbow Union
PART NO. Stem O.D. Qty / BoxTube O.D.
PTEU 0404 1/4 1/4 500PTEU 0505 5/16 5/16 400PTEU 0606 3/8 3/8 250PTEU 0707 1/2 1/2 200
SA - Stem Adapter NPTF Thread
PART NO. NPTFThread Qty / BoxStem O.D.
PSA 0402 1/4 1/8 500PSA 0404 1/4 1/4 500PSA 0504 5/16 1/4 500PSA 0506 5/16 3/8 300PSA 0604 3/8 1/4 400PSA 0606 3/8 3/8 300PSA 0706 1/2 3/8 250PSA 0707 1/2 1/2 150
FA - Female Adapter NPTF Thread
PART NO. NPTFThread Qty / BoxTube O.D.
PFA 0402 1/4 1/8 500PFA 0404 1/4 1/4 400PFA 0602 3/8 1/8 300PFA 0604 3/8 1/4 300
RD - ReDucer
PART NO. Qty / BoxStem O.D.Tube O.D.
PRD 0406 1/4 3/8 500PRD 0607 3/8 1/2 300
POLYPROPYLENE FITTINGS [Inch] [Inch/Metric Size] VALVES
Control valves
Features
Flow Rate Per Rotation of Valve Stem
Highly durable and fatigue resistant.Can be used with a variety of chemicals & gases. However,when using other than water or air, please refer to the ChemicalCompatability Tables, or consult our representative.Do not apply excessive vibration, torque, shock, or other strongloads on the fittings. The valve body may be damaged or collectsmay be dislocated.Color : Inch Size - White (Acetal)
Metric Size - Black (Acetal)
The above data may vary depending on the time and temperature variations.
Needle (X2)1 2 3 4 5 6
Control Valve
Pre
ssur
e(kg
f/cm
2 )
Flo
wR
ate
9
7
5
3
1
120.00
100.00
80.00
60.00
40.00
20.00
0.00
CUC - Control valveUnion Connector
PART NO. Tube O.D. Qty / BoxTube O.D.ACUC 0404 1/4 1/4 250
ACUC 0606 3/8 3/8 150
PART NO. Tube O.D. (mm) Qty / BoxTube O.D. (mm)ACUC 0606M 6 6 200
ACUC 1010M 10 10 150
CEU - Control valveElbow Union
PART NO. Tube O.D. Qty / BoxTube O.D.ACEU 0404 1/4 1/4 250
ACEU 0606 3/8 3/8 150
PART NO. Tube O.D. (mm) Qty / BoxTube O.D. (mm)ACEU 0606M 6 6 250
ACEU 1010M 10 10 150
CFA - Control valveFemale Adapter
PART NO. NPTF Thread Qty / BoxTube O.D.ACFA 0404 1/4 1/4 250
ACFA 0606 3/8 3/8 150
PART NO. BSPT(PT) Thread Qty / BoxTube O.D. (mm)ACFA 0604M 6 1/4 200
ACFA 1006M 10 3/8 150
CMC - Control valveMale Connector
PART NO. NPTF Thread Qty / BoxTube O.D.ACMC 0404 1/4 1/4 250
ACMC 0606 3/8 3/8 150
PART NO. BSPT(PT) Thread Qty / BoxTube O.D. (mm)ACMC 0604M 6 1/4 250
ACMC 1006M 10 3/8 150
Tube
Valve Seat
Packing (NBR)
Locking Nut(brass)Valve Body (acetal)
Shaft (brass)
O-Ring (NBR)
Cap Nut(brass)
Collets (acetal)
Construction
Working Pressure and Temperature
Pressure
Temperature
10bar
1 35 ~ 20 70
4bar
65 150
3332
VALVES[Inch/Metric Size]
HMC - Hand valve Male ConnectorPART NO. NPTF Thread Qty / BoxTube O.D.AHMC 0404 1/4 1/4 150
AHMC 0606 3/8 3/8 100
AHMC 0707 1/2 1/2 70
HUC - Hand valve Union Connector
PART NO.TubeO.D.
Qty /Box
TubeO.D.
FittingSize
AHUC 0404 1/4 1/4 150
AHUC 0606 3/8 3/8 100
AHUC 0707 1/2 1/2 70
AHUC 0806 5/8 3/8 50
AHUC 0807 5/8 1/2 50
AHUC 0808 5/8 5/8 50
AHUC 1010 7/8 7/8 20
HFAUC - Hand valve Female Adapter Union ConnectorPART NO. NPTF Thread Qty / BoxTube O.D.
AHFAUC 0607 3/8 1/2 100
PART NO. BSPT(PT) Thread Qty / BoxTube O.D. (mm)AHFAUC 1007M 10 1/2 100
HFA - Hand valve Female Adapter
PART NO. NPTFThread
Qty /Box
TubeO.D.
FittingSize
AHFA 0404 1/4 1/4 150
AHFA 0606 3/8 3/8 100
AHFA 0607 3/8 1/2 80
AHFA 0706 1/2 3/8 70
AHFA 0707 1/2 1/2 70
AHFA 0806 5/8 3/8 50
AHFA 0807 5/8 1/2 50
Hand valves
FeaturesCan be used with a variety of chemicals &gases. However, when using other thanwater or air, please refer to the ChemicalCompatability Tables or consult ourrepresentative.Do not apply excessive vibration,torque, shock, or other strong loadson the fittings. The valve body may be
damaged, or the collets may be dislocated.Easy quarter-turn operation for opening and closing.Partial flow control is possible (high, medium, low).Ruggedly designed for durability.Color : Inch Size - white, Metric Size - BlackMax. Handle Torque : 0.2 N-M
Construction
Body (acetal)
Collets (acetal)
Cap (acetal)
O-Rings (NBR)
Handle (acetal)
Shaft (acetal)
Screw (SUS)
Working Pressure and Temperature
Air
Air / Liquid
Temperature
-201
2065
Pressure
10bar
10bar
10bar
7bar
Hand valves
HVEU - Hand Valve Elbow Union connectorPART NO. Tube O.D. Qty / BoxTube O.D.
AHVEU 0608 3/8 5/8 50
TWV - Three Way Valve
PART NO. TubeO.D.
TubeO.D.
TubeO.D.
Qty /Box
ATWV 080808 5/8 5/8 5/8 20
HWM - Hand Washing Machine valve
PART NO. TubeO.D.
BSPT(PT)Thread
ThreadSize
Qty /Box
AHWM 0809 5/8 3/4 M3.0XP3.5 20
HBC - Hand Barb ConnectorPART NO. Tube I.D. Qty / BoxTube O.D.AHBC 0807 5/8 1/2 100
AHBC 1007 7/8 1/2 60
AHBC 1009 7/8 3/4 60
HUCS - Hand valve Union Connector (Short handle)PART NO. Tube O.D. Qty / BoxTube O.D.
AHUCS 0606 3/8 3/8 100
MCLP - Mounting ClipSize Qty / BoxPART NO.
AMCLP06 3/8 200
Order siges with short handleare available by customer sdemand.
SmallSize
LargeSize
LargeSize
SmallSize
3534
VALVES[Inch/Metric Size]
HUC - Hand valve Union Connector
PART NO. Tube O.D.(mm)
Qty /Box
Tube O.D.(mm)
FittingSize
AHUC 0606M 6 6 150
AHUC 1010M 10 10 100
AHUC 1212M 12 12 70
AHUC 1510M 15 10 50
AHUC 1515M 15 15 40
AHUC 1610M 16 10 50
AHUC 1616M 16 16 50
AHUC 2222M 22 22 20
PART NO. Tube O.D. Qty /Box
Tube O.D.(mm)
FittingSize
AHUC 16M06 15 3/8 50
AHUC 16M07 15 1/2 50
AHUC 16M08 15 5/8 50
HMC - Hand valve Male ConnectorPART NO. BSPT(PT) Thread Qty / BoxTube O.D. (mm)
AHMC 0604M 6 1/4 150
AHMC 1006M 10 3/8 100
AHMC 1207M 12 1/2 70
HVMCB - Hand Valve Male Connecto BSP(P) Thread
PART NO. BSP(P) Thread Qty / BoxTube O.D.(mm)AHVMCB 1509M 15 3/4 30
HFA - Hand valve Female Adapter
PART NO. BSPT(PT)Thread
FittingSize
Qty /Box
Tube O.D.(mm)
AHFA 0604M 6 1/4 150
AHFA 1006M 10 3/8 100
AHFA 1007M 10 1/2 100
AHFA 1206M 12 3/8 70
AHFA 1207M 12 1/2 70
AHFA 1506M 15 3/8 40
AHFA 1507M 15 1/2 40
AHFA 1606M 16 3/8 40
AHFA 1607M 16 1/2 40
TWV - Three Way Valve
PART NO. Tube O.D.(mm)
Tube O.D.(mm)
Tube O.D.(mm)
Qty /Box
ATWV 121212M 12 12 12 20
ATWV 161616M 16 16 16 20
HBC - Hand Barb ConnectorPART NO. Tube I.D. Qty / BoxTube O.D. (mm)
AHBC 1507M 15 1/2 100
AHBC 2207M 22 1/2 60
AHBC 2209M 22 3/4 50
HSV - Hand Stop Valve connectorPART NO. Tube O.D.(mm) Qty / BoxTube O.D.(mm)
AHSV 1515M 15 15 80
AHSV 2215M 22 15 60
THC - Throttle Hand valve ConnectorPART NO. Tube O.D.(mm) Qty / BoxTube O.D.(mm)
ATHC 1515M 15 15 20
ATHC 2222M 22 22 10
Hand valves
Qty / BoxQty / BoxPART NO. InletTube O.D.
OutletTube O.D.
ACHV 0404 1/4 1/4 300
ACHV 0405 1/4 5/16 250
ACHV 0505 5/16 5/16 250
ACHV 0606 3/8 3/8 200
ACHV 0707 1/2 1/2 150
PART NO. InletTube O.D.(mm)
OutletTube O.D.(mm)
ACHV 0606M 6 6 250
ACHV 0808M 8 8 200
ACHV 1010M 10 10 200
ACHV 1212M 12 12 150
Check valves
Can be used with a variety of chemicals and gases. However, whenusing other than water or air, please refer to Chemical CompatabilityTables, or consult our representative.
Do not apply excessive vibration, shock, torque, or other strongloads on the fittings. The valve body may be damaged or thecollets may be dislocated.
Superior function in a compact size.
Color : Inch Size - White (Acetal)Metric Size - Black (Acetal)
Features
CHV - CHeck Valve
ConstructionSpring (SUS)
Packing (NBR)
O-Ring (NBR)
Shaft (acetal)
Cap (acetal)
Collet (acetal)
Working Pressure and Temperature
Pressure
Temperature
10bar
1 35 ~ 20 70
5bar
65 150
SmallSize
SmallSize
LargeSize
LargeSize
LargeSize
3736
ACCESSORIES
Tube O.D. Qty / BoxPART NO.
Ensures a firm and more secure connectionWith its protruding tab, attaching and detaching the clip is easy.Available in a variety of colors - allows easy color-coding.
ALC 03 3/16 12,000
ALC 04 1/4 10,000
ALC 05 5/16 8,000
ALC 06 3/8 7,000
ALC 07 1/2 5,000
ALC 08 5/8 4,000
ALC 10 7/8 3,000
TS - Tube Support
PART NO. Tube O.D.
ATS 04
ATS 05
ATS 06
ATS 07
ATS 08
ATS 10
1/4
5/16
3/8
1/2
5/8
7/8
Tube I.D.
0.170
1/4
5/16
3/8
1/2
17(mm)
Qty / Box
3,500
3,000
2,000
1,000
800
600
PART NO. Tube O.D.(mm)
ATS 06M
ATS 08M
ATS 10M
ATS 12M
ATS 15M
ATS 16M
ATS 18M
ATS 22M
ATS 28M
6
8
10
12
15
16
18
22
28
Tube I.D.(mm)
4
6
7
9
12
12
14
18
23
Qty / Box
3,500
3,000
2,000
1,000
600
500
400
300
300
LC - Locking Clip
Tube O.D. (mm) Qty / BoxPART NO.ALC 05M 5 12,000
ALC 06M 6 10,000
ALC 08M 8 8,000
ALC 10M 10 7,000
ALC 12M 12 5,000
ALC 15M 15 4,000
ALC 16M 16 4,000
ALC 18M 18 3,000
ALC 22M 22 2,000
ALC 28M 28 2,000
Tube O.D. Qty / BoxPART NO.ACOV 04 1/4 700
ACOV 05 5/16 600
ACOV 06 3/8 600
ACOV 07 1/2 500
ACOV 08 5/8 500
ACOV 10 7/8 300
COV - collet COVer
Tube O.D. (mm) Qty / BoxPART NO.ACOV 06M 6 700
ACOV 08M 8 600
ACOV 10M 10 600
ACOV 12M 12 500
ACOV 15M 15 500
ACOV 16M 16 500
ACOV 18M 18 400
ACOV 22M 22 300
ACOV 28M 28 200
DSI - Double Seal Insert
PART NO. Tube O.D.
ADSI 06
ADSI 07
ADSI 08
ADSI 10
3/8
1/2
5/8
7/8
Tube I.D.
5/16
3/8
1/2
17(mm)
Qty / Box
2,000
1,000
800
600
PART NO. Tube O.D.(mm)
ADSI 08M
ADSI 10M
ADSI 12M
ADSI 15M
ADSI 16M
ADSI 18M
ADSI 22M
ADSI 28M
8
10
12
15
16
18
22
28
Tube I.D.(mm)
6
7
9
11.5
12
14
17.5
23
Qty / Box
3,000
2,000
1,000
800
800
600
600
400
The tube support is recommended for usewith soft or very thin walled tubing.
Tube O.D. (mm) Qty / BoxPART NO.ARA 10M 10 5000
ARA 12M 12 4000
ARA 12M 12 4000
ARA 15M 15 4000
ARA 16M 16 4000
ARA 18M 18 3000
ARA 22M 22 3000
ARA 28M 28 2500
Tube Cutter with qualityblade is suitable for cutting plastictubing sizes up to 13mm.
TC - Tube CutterTube O.D. Qty / BoxPART NO.
TC MAX. DIA 1/2 or 13mm 40
Convenient for separating variouscollets and tubes.
Convenient for separating powerfittings.
SP - SPannerTube O.D.PART NO.
ASP 3/16, 1/4, 5/16, 3/8, 1/2
Hook
Tube O.D. Qty / BoxPART NO.
FBC 08 is made from NylonUsed to provide a simple means for a smooth 90 degree tube bend without kinks.May be secured to equipment or a wall using screws.
AFBC 05 5/16 400AFBC 06 3/8 200
FBC - Flow Bend Clip
Tube O.D. (mm) Qty / BoxPART NO.AFBC 08M 8 300AFBC 10M 10 200
Tube O.D. Qty / BoxPART NO.NFBC 08 1/2(12mm) to 5/8(15mm) 100
Tube O.D. Qty / BoxPART NO.ARA 06 3/8 5000
ARA 07 1/2 4000
ARA 08 5/8 3000
ARA 10 7/8 3000
RA - Release Aid
PSP - Power SPanner (Nylon)Tube O.D.PART NO.
NPSP 5/16, 3/8
Size No. Qty / BoxPART NO.AHOOK 19.5
TLC - Tube Locking Clamp (Nylon)Tube O.D. Qty / BoxPART NO.
NTLC 08 5/8 200
HTC - Hand Tube Cutter (Nylon)Tube O.D.(Minimum)
Tube O.D. (Inch)(Maximum)PART NO.
NHTC 08 5/32 5/8
3938
CARTRIDGES FILTER STRAINERS
BRASSCARTRIDGEO-RING NBR
Tube O.D. Qty / BoxPART NO.BC 01 5/32 2000
BC 03 3/16 2000
BC 04 1/4 1000
BC 05 5/16 1000
BC 06 3/8 700
BC 07 1/2 500
Inch size
BRASSCARTRIDGEO-RING NBR
Tube O.D. (mm) Qty / BoxPART NO.BC 04M 4 2000
BC 05M 5 1000
BC 06M 6 1000
BC 08M 8 1000
BC 10M 10 700
BC 12M 12 500
BC 15M 15 500
BC 22M 22 300
Metric size
BC - Brass Cartridge
Cartridge AssemblyHalf cartridges
(PUSH-IN) half cartridges are available in brass, stainless steel,and acetal. They allow simple and economical connection of tubing intometal or plastic bodies used for pumps, filters, and other fluid-handlingproducts. The tables below provide details required of mating parts.To install, the cartridge COLLAR is pressed into the "A" diameter. Theninsert the O-RING and COLLET. The assembly is then complete andready for use.For designing with acetal half-cartridges, first consult our representative.
Inch Sizes - using one o-ring
A 0.002" B 0.002" C 0.002" D 0.01"/ 0 E 0.006" F 0.006"
5/32 0.490 0.317 0.161 0.181 0.370 0.5023/16 0.470 0.344 0.197 0.181 0.370 0.5021/4 0.530 0.421 0.254 0.181 0.373 0.5455/16 0.542 0.465 0.323 0.213 0.413 0.6153/8 0.630 0.563 0.378 0.268 0.472 0.7191/2 0.775 0.661 0.508 0.303 0.525 0.827
Size(Inch)
Inch Sizes - using two o-rings
A 0.002" B 0.002" C 0.002" D 0.01"/ 0 E 0.006" F 0.006"
5/32 0.490 0.317 0.161 0.181 0.462 0.5943/16 0.470 0.344 0.197 0.181 0.462 0.5941/4 0.530 0.421 0.254 0.181 0.477 0.6535/16 0.542 0.465 0.323 0.213 0.508 0.7093/8 0.630 0.563 0.378 0.268 0.574 0.8221/2 0.775 0.661 0.508 0.303 0.629 0.945
Size(Inch)
(Unit: inches)
(Unit: inches)
Metric Sizes - using one o-ring
A 0.05 B 0.05 C 0.05 D E 0.15 F 0.15+0.25-0
4 12.44 8.05 4.10 4.59 9.39 12.755 11.93 8.73 5.10 4.59 9.39 12.756 13.46 10.69 6.10 4.59 9.47 13.848 13.76 11.81 8.10 5.41 10.50 15.6310 16.00 14.30 10.10 6.80 11.98 18.2712 19.68 16.78 12.10 7.69 13.33 21.0015 22.90 20.20 15.20 9.00 17.20 26.3022 31.10 27.60 22.20 10.90 21.10 31.30
Size(mm)
Metric Sizes - using two o-rings
A 0.05 B 0.05 C 0.05 D E 0.15 F 0.15+0.25-0
4 12.44 8.05 4.10 4.59 11.73 15.085 11.93 8.73 5.10 4.59 11.73 15.086 13.46 10.69 6.10 4.59 12.22 16.598 13.76 11.81 8.10 5.41 12.90 18.0010 16.00 14.30 10.10 6.80 14.28 20.8712 19.68 16.78 12.10 7.69 16.27 24.0015 22.90 20.20 15.20 9.00 20.00 26.3022 31.10 27.60 22.20 10.90 24.30 31.30
Size(mm)
(Unit: mm)
(Unit: mm)
BC will not be suitable to a plated copper body.Further more specifications in the use, please contactto our sales representative in your side.
Jig for assembly
Hammer
O-Ring
Clip
Tube
BC Cartridge
STAINLESSSTEEL
CARTRIDGEO-RING NBR
Tube O.D. Qty / BoxPART NO.SC 01 5/32 2000
SC 03 3/16 2000
SC 04 1/4 1000
SC 05 5/16 1000
SC 06 3/8 700
SC 07 1/2 500
Inch size
STAINLESSSTEEL
CARTRIDGEO-RING NBR
Tube O.D. (mm) Qty / BoxPART NO.SC 04M 4 2000
SC 05M 5 1000
SC 06M 6 1000
SC 08M 8 1000
SC 10M 10 700
SC 12M 12 500
SC 15M 15 500
SC 22M 22 300
Metric size
SC - Stainless Steel Cartridge
Out
Collet Inlet
CapBody
Strainer element
O-Ring
PART NO. OUTLET Qty / BoxINLETADMF 0404 1/4 1/4 50
ADMF 0505 5/16 5/16 50
ADMF 0606 3/8 3/8 50
ADMF 0707 1/2 1/2 40
Inch Size (Standard-100Mesh)PART NO. OUTLET (mm) Qty / BoxINLET (mm)
ADMF 0606M 6 6 50
ADMF 0808M 8 8 50
ADMF 1010M 10 10 50
ADMF 1212M 12 12 40
Metric Size (Standard-100Mesh)
A rugged and durable filter strainer, available in 100 mesh (standard) withoptional 150 or 200 mesh replaceable elements.
Compatible with DMfit tube and fittings, as well as standard-sizedtubing from a variety of other manufacturers.Color options: gray, white, or black.The detachable CAP and BODY allow for easy servicing and cleaning.Can be used with a variety of chemicals and gases. However, when usingwith other than water or air, please refer to the Chemical CompatabilityTables or consult our representative.Do not apply excessive vibration, torque, shock or other strong loads to thefilter. The filter body may be damaged or collets may be dislocated.
Features
SUS
Screen Mesh
Materials
100 Mesh
Standard Special Order
150 Mesh 200 Mesh
Standard models are provided with100 mesh screen elements.150 and 200 meshes are available by special order.
Maximum pressure values are based on use at room temperature.Consult your DMT representative when using at continuous elevatedtemperature and pressure
Working Pressure and Temperature Filter Materials and Mesh Size
Size 1/4
6mm
170psi
Air -20 (-4 ) ~ 65 (150 ) Liquid
5/16
8mm
3/8
10mm
1/2
12mmParameter
Pressure
Temperature
4140
tubing is produced from an advanced grade of low densitypolyethylene. Its greatest advantage is superior environmental stresscracking resistance (ESCR), greatly exceeding that of ordinarypolyethylene tubing as measured by ASTM D-1693 (IGEPAL) tests.Environmental stresses that can shorten the service life of tubinginclude chemical exposure, aging connections with barb-type fittings,or high vibration loads with connections to compression fittings. DMtubing is compliant to ANSI/NSF-51, 61, SK, WRAS and FDArequirements for food contact applications. DM tubing is available inmultiple coding colors, and offers the user:
Dimensional stabilityUniformity and long-term strengthHigher burst pressureGreater tensile strengthWide range of available colors.Suitable for use with products and those of othermanufacturers.
Pressure values are based on PE tube used at room temperature.Consult our representative when using at continuous elevated temperature and pressure.
Size
Parameter
Working Pressure and Temperature Order Information
DPE 04 (M) - B - 0500
Inch SizePart No. O.D. In. I.D. In. Wall Reel Length ft.
DPE 01 5/32 0.094 0.031 1500
DPE 03 3/16 0.125 0.031 1350
DPE 04 1/4 0.170 0.04 1000
DPE 05 5/16 0.216 0.048 650
DPE 06 3/8 1/4 0.062 500
DPE 07 1/2 3/8 0.062 300
Part No. O.D. (mm) I.D. (mm) Wall (mm) Reel Length (Meter)
DPE 04M 4 2.5 0.75 500
DPE 05M 5 3.5 0.75 400
DPE 06M 6 4 1 300
DPE 08M 8 6 1 200
DPE 10M 10 7 1.5 150
DPE 12M 12 9 1.5 100
Metric Size
5/32 3/16 1/4 5/16 3/8 1/2
4 5 6 8 10 12
230 psi 170 psiPressure
Tube Tolerances
Temperature
-0.1mm / +0.1mm
Air -20 (-4 ) ~ 65 (150 ) Liquid
Colors Available
Suffix Color 5/32 3/16 1/4 5/16 3/8 1/2 4 5 6 8 10 12
B Blue
Y Yellow
W White
N Natural
BK Black
R Red
Gr Gray
G Green
TC - Tube Cutter
Reel Length
Color: Blue
"M", if metric size
O.D. of tube
Tube Cutter with qualityblade is suitable for cuttingplastic tubing sizes up to 13mm.
POLYETHYLENE TUBE PARALLEL THREADBSP(P): British Standard Pipe Parallel ThreadUNF: Unified National Fine ThreadUNS: Unified National Special ThreadUN: Unified National ThreadUNEF: Unified National Extra FineNPSM: National Pipe Straight Mechanical ThreadNH: National Hose coupling ThreadBSW : British Standard whitworth Thread
Nominal Size
1/8-28 BSPP(PF)
1/4-19 BSPP(PF)
3/8-19 BSPP(PF)
1/2-14 BSPP(PF)
5/8-14 BSPP(PF)
3/4-14 BSPP(PF)
7/16-20 UNF
1/2-20 UNF
5/8-18 UNF
3/4-16 UNF
7/16-24 UNS2B
2A
11.113
11.085
10.549
10.396
10.211
9.825
60
60
1.270
1.270
1.4111
1.5875
1.058
1/2-16 UN2B
2A
12.700
12.664
11.824
11.63360 1.588
9/16-24 UNEF2B
2A
14.288
14.257
13.729
13.569
13.386
12.99760 1.058
1/2-14 NPSM20.904
20.904
19.942
19.733
19.279
19.27960 1.814
0.75-11.5 NH27.242
26.988
26.022
25.552
24.803
24.11760 2.209
11.112
12.70
15.875
19.05
10.287
11.874
14.958
18.019
9.738
11.326
14.348
17.33
55
0.907
1.337
1.337
1.814
1.814
1.814
9.728
13.157
16.662
20.955
22.911
26.411
9.147
12.301
15.806
19.793
21.749
25.279
8.566
11.445
14.950
18.631
20.587
24.117
Pitch ofThread
( p )
Female
Male
Major Dia.(D) Pitch Dia. (D2) Minor Dia.(D1)
Major Diam. (d) Pitch Diam. (d2) Minor Diam.(d1)
Angle( )
TAPER THREAD
NPTF: National Pipe Taper Fuel ThreadBSP(T): British Standard Pipe Tapered Thread
Nominal Size
1/8-27 NPTF
1/4-18 NPTF
3/8-18 NPTF
1/2-14 NPTF
3/4-14 NPTF
60
0.941
1.411
1.411
1.814
1.814
9.489
12.487
15.926
19.772
25.117
6.924
10.020
10.330
13.571
14.504
4.102
5.786
6.096
8.128
8.611
Pitch ofThread
( p )Pitch Dia.
EffectiveThreadExternal
( )
NominalCompleteExternalThreads
( a )
Angle( )
1/8-28 BSPT(PT)
1/4-19 BSPT(PT)
3/8-19 BSPT(PT)
1/2-14 BSPT(PT)
3/4-14 BSPT(PT)
55
0.907
1.337
1.337
1.814
1.814
9.147
12.301
15.806
19.793
25.279
8.000
11.000
12.000
15.000
17.000
3.970
6.010
6.350
8.160
9.530
3/8-24 BSW
1/2-24 BSW
9/16-24 BSW
55
1.588
2.117
2.117
9.525
12.700
14.287
8.509
11.345
12.931
7.492
9.990
11.574
CHEMICAL COMPATABILITY TABLES
has excellent resistance to exposure to organic compounds, industrial chemicals, andgases (refer to tables).
Resistance of chemical characteristics for plastic resins & elastomers.
Resistance of chemical characteristics for Tube.Name of chemicals
Hexane
Hydrogen gas
Lighting gas
Mercury
Methanol (Methyl Alcolhol)
Milk
Molasses
Nickel salts
Oils, essential
Propane gas
Spindle Oil
Water, high-purity
Polyethylene RemarksName of chemical
Air
Alcohol
Ammonia gas
Ammonia liquid
Beer
Benzene
Bromine liquid
Carbon dioxide gas
Caustic soda
Diesel fuel
Ethyl alcohol
Fluor gas, dry
Fuel Oil
Polyethylene Remarks
high temperature
high temperature
: Very acceptable, : Acceptable, : Slightly unacceptable, : Very unacceptableDifferences in data can exist due to extended duration and elevated temperature (Standard data reflects use at ambient temperature.)Consult our representative when using unsuitable liquids.
Description (%, ) BrassSUS Resin Rubber
Description (%, ) BrassSUS Resin Rubber
304 Acetal PBT PP NBR EPDM 304 Acetal PBT PP NBR EPDM
Caustic soda(10%,20 ) Lye solution - -
Gasoline Hydrochloric acid(10%,20 ) - -
Formic acid(25%,20 ) Hydrochloric acid(20%,20 ) - -
Air Hydrochloric acid(20%,80 )
Mineral oil Hydrochloric acid(38%,20 )
Grease Ammonium chloride
Sodium silicate - Calcium chloride
Glycerin Naphtha
Ozone Olive oil
Animal oil(Lard oil) - Sulfur -
Kerosene Sodium phosphate
Methane - Ammonium phosphate
Methyl alcohol(Methanol) Ammonium nitric
Water(24 ) Nitrogen
Water(100 ) - - Natural gas
Sea water - - Acetic acid(10%,20 )
Bunker oil - - - - Acetic acid(50%,20 ) - -
Benzene(Benzol) Acetic acid(50%,70 ) - -
Butane Acetic acid(100%,20 ) - -
Fluorine - - Ketones -
Boric acid Cresol
Carbon tetrachloride Chromic acid(2%,70 ) - -
Oxygen Chromic acid(10%,70 ) - -
Petroleum - - Chromic acid(25%,70 ) - -
Soda ash(Sodium carbonate) Chromic acid(2%,50 )
Calcium hydroxide Soybean oil
Hydrogen Toluene
Mercury - - - Glucose
Steam(150 ) - Propane
Sodium cyanide - Castor oil
Vegetable oil - - Sulfuric acid(10%,20 )
Silicone greases - - Sulfuric acid(10%,70 ) - -
Silicone oil - - Sulfuric acid(30%,20 ) - -
Acetone Sulfuric acid(30%,70 ) - -
Sulfurous acid gas - - Sulfuric acid(98%,20 ) - -
Ammonia Aluminium sulfate
Liquiefied petroleum gas(LPG) Potassium sulfate
Ethyl alcohol(Ethanol) Hydrogen sulfide
: Very acceptable : Acceptable : Slightly Unacceptable : Unacceptable - : No data
42