DNP/UCAIug Joint Meeting 2011 Greetings – Erich Gunther, Enernex – UCAIug Board Chair UCAIug Update – Kay Clinard, UCAIug President CIMug Update – Greg

DNP/UCAIug Joint Meeting 2011

• Greetings – Erich Gunther, Enernex – UCAIug Board Chair

• UCAIug Update – Kay Clinard, UCAIug President• CIMug Update – Greg Robinson, Xtensible• IEC61850ug Update – Christoph Brunner, it4power• OSGug Update – Erich Gunther, Enernex• Testing Update – Bruce Muschlitz, Enernex• UCAIug IOP 2011 – Herb Falk, SISCO

Update on Organizational Issues

• OSGug has just completed elections for two open TC seats…Marty Burns, and John Simmins are the two new members

• EC has just completed elections for three open seats for OSG representation…Aaron Snyder, Gary Stubbing, Klaus Bender are the three new members

• Will be seeking nominations for three more EC members.

UCAIug 2011 Plan• 2011 we will focus on member recruitment

– Being in contact with existing members– Customer Satisfaction Survey– Revising membership structure– Tightening document access – Increasing meeting costs for non-members– Complete IPR and put in place

UCAIug 2011 Plan, cont..

• Last year we started acquiring equipment required for meeting support…projectors, phones, room sound systems.

• For 2011 the goal is to:– Streamline meeting planning process– Minimize charges where possible– Use hotel staff to install and manage UCAIug supplied

equipment– Use additional technical support where needed for

A/V.

UCAIug 2011 Plan, cont…• 2011 Daily Operations

– Continuing support of SGIP– Identify tasks that where additional/other resources

can be used– Use proceeds from Meetings to pay for additional

resources as available– Streamline credit card collections accounting process

• Now Using PayPal for all cards• Automating Data Collection & Reporting

– Meeting registration process• Now using RegOnLine…evaluate using Cvent

UCAIug Budget

Where the Budget GoesProjected Expense

Professional Fees $17,500

Customer Relations $8,000 Web Presence $98,200

Marketing $24,000

Meetings $315,988

Testing Committee $90,000

Expansion Plan to Establish Utiliy Forum $30,000

Daily Operations $235,930

Bank and Credit Card Fees $15,400

Total Projected Proposed Budget Expenditures $835,018

Projected 2009 Income Less Expenditures $30,382

Balance brought forward from 2010 operations -$30,000

Projected Balance at end of 2011 operations $382

CIMUG UPDATE

Greg Robinson, Xtensible Solutions

IEC 61850 update

Christoph Brunner

[email protected]

mailto:[email protected]

New parts

• Domain specific object models– IEC 61850-7-4, Ed 2: Basic communication structure –

Compatible logical node classes and data object classes– IEC 61850-7-410: Hydroelectric power plants –

Communication for monitoring and control– IEC 61850-7-420: Communications Systems for Distributed

Energy Resources (DER)

Documents in preparation

• IEC 61850-7-5 – Use of the basic elements of IEC 61850 models

• IEC 61850-7-500 – Use of logical nodes to model the functions of a substation automation system

• IEC 61850-7-510 – Use of logical nodes to model the functions of a hydro power plant

Mappings for gateways

• IEC 61850-80-1 – Guideline to exchange information from a CDC based data model using IEC 60870-5-101 / -104

• IEEE 1815.1 – Exchanging Information between networks Implementing IEC 61850 and IEEE1815 (DNP3)– Intended to become a IEC dual

logo standard (IEC 61850-80-2)

DNP Master

DNP Outstation

IEC 61580 Client

IEC 61850 Device

IEC 61850 Device

IEC 61850 Device

IEC 61850 Device

Gateway

How to address new areas?

• Prepare technical reports "how to use IEC 61850 for... "• Technical reports describing

– The use cases considered– The impact on the communication– The impact on the modeling– The impact on the engineering

• Results will be used to update the standards (Amendment / new Edition)

WG10 technical reports

• IEC 61850-90-1: Using IEC 61850 for communication between substations (published)

• IEC 61850-90-2: Using IEC 61850 for communication between substations and control center

• IEC 61850-90-3: Using IEC 61850 for condition monitoring• IEC 61850-90-4: Network engineering guidelines• IEC 61850-90-5: Using IEC 61850 to transmit synchrophasor

information according to IEEE C37.118

WG17 technical reports

• IEC 61850-90-6: Using IEC 61850 for distribution automation• IEC 61850-90-7: IEC 61850 object models for photovoltaic,

storage and other DER inverters• IEC 61850-90-8: IEC 61850 object models for electrical

vehicles• IEC 61850-90-9: IEC 61850 object models for battery storage

systemsProvide a "fast track" for urgently needed models for

SmartGrid applicationsSupported by the name space concept of IEC 61850

Other activities

• Develop methodologies for testing of functions in IEC 61850 based systems

• Define aspects of modeling distributed logic• Prepare UML model of IEC 61850• Prepare webbased access to IEC 61850 models

Status Edition 2

• Published: Parts 6, 7-2, 7-3, 7-4• FDIS: Parts 4, 7-1, 8-1, 9-2• CDV: Part 5, 10• CD: Part 3• Circulated as DC – in preparation for DTR: Part 1• Withdrawn: Part 9-1

Open Smart Grid(OpenSG)

Technical Committee

AMI-EnterpriseTask Force

SG ConformityWorking Group

SG NetworkTask Force

SG SystemsWorking Group

SG CommunicationsWorking Group

SG SecurityWorking Group

OpenADRTask Force

AMI-SecurityTask Force

Network InteropTask Force

Ent Info MgmtTask Force

OpenADETask Force

UtilityAMIInterest Group

ObserversEEI, UTC

EdgeConformance

EnterpriseConformance

SecurityConformance

CyberSec-InteropTask Force

Usability AnalysisTask Force

OpenHANTask Force

SG SimulationsWorking Group

http://osgug.ucaiug.org/

2010 OpenSG WG Specific Objectives SG Simulation – NEW for 2010! – Establish WG, chairman, charter

SG Systems OpenADR

Build CIM into OpenADR specifications Harmonize OpenADR with other TFs (OpenHAN, OpenADE, Conformance, etc.)

OpenADE OpenADE 1.0 SRS: February 2010 OpenADE 2.0: User Requirements Q2 2010 OpenADE 2.0: System Requirements / Service Definitions Q4 2010

OpenHAN OpenHAN 2.0 SRS ratified by OpenSG

SG Communications Finalize the PAP 2 Task 1 and 3 OpenSG Interim Report #2 Meet with NIST and IEEE 802 to begin work on PAP 2 Task 4 (mapping of OpenSG application

requirements to the inventory of wireless standards) Agree to high level statement on Network Interoperability Scope and Charter and begin work

SG Conformance Agree upon (simple) definitions for Conformance and Interoperability and “Abstract Test Cases” and

“Concrete Test Cases” Agree upon a language (framework, taxomomy) upon which to build abstract test cases Edge Conformance

Complete Certification Process Reference Manual

SG Security Establish coordinated support for other OpenSG working groups & task forces Revise the AMI Security Profile Address additional security profiles as produced by ASAP-SG

Next Meeting South San Francisco

– Embassy Suites SFO March 7: OpenSG Boot Camp Sessions March 8 – 10: User Group General and

Work Group Sessions

UCA TESTINGPAST, PRESENT, AND FUTURE UCAI MEETINGSAN DIEGO, CAFEBRUARY 1, 2011

Bruce MuschlitzCommittee co-chair

www.ucaiug.org

February 1, 2010 UCA IUG Testing Past, Present, and Future

February 1, 2010UCA IUG Testing Past, Present, and Future

22

Testing Committee Background

Group created during UCA IUG creation Began work 2005 Technical Tasks

Test Procedures Quality Assurance Program Tester Accreditation

Administrative Tasks Maintain Conformance Certificates Maintain testing documents


23

Testing Subcommittee Charter Single point focus for UCA IUG Arbitrates technical issues Coordinates groups within UCA

61850 Testing Open Smart Grid Conformity CIM Interoperability

Requires utility rep as co-chair Now technically in violation (volunteers?)


24

NIST SmartGrid Developments NIST is an international collaboration Smart Grid Interoperability Panel SG Testing and Certification Committee InterOp Process Reference Manual

Best practices InterOp Testing and Certification Authority Mandates CB adhere to ISO/IEC Guide 65 Mandates Tester adhere to ISO/IEC 17025

NIST needs organization(s) to pilot IPRM


25

UCA Pilot of NIST IPRM UCA has volunteered to pilot IPRM

UCA procedures almost meet IPRM UCA status will be improved

Some changes needed: UCAS and testers UCA to become Guide 65 Certification Body

UCA must adopt formal quality management sys UCA will issue (sign off on) certificates

Testers to become 17025 certified/compliant Tester will not have final say on certificate issue UCA will review the “tester file” before cert issued


26

UCA Pilot of NIST IPRM (cont.) 2011 is transition year for IPRM

User Group need to declare ITCA intent Lack of progress nullifies that declaration

Changes needed Create quality manual for UCA testing Have testers upgrade 9001 -> 17025 Remove tester authority to issue certificates Significant per-test UCA work(review all tests) Testing fees might be considered


27

Questions

?

Systems Integration Specialists Company, Inc.

The Standards Based Integration Company

© Copyright 2011 SISCO, Inc.28

Report on UCA User Group IOPs 2011


What’s being tested


Rules of engagement

IOPs are closed except to:

Participants

Witnesses

Each IOP team develops their own use cases, test procedures, and expected results.

Testing will occur in a distributed or centralized fashion and will be closed to team members only (week of March 28th).

Test reports will be generated by each team and made available to UCA User Group members.


61850 Tests


Witnesses

EDFeRDFKEMAProsoftRed Electrica de Espanma


61850 - Infrastructure

Test objectives: To test Rapid Spanning Tree Protocol (RSTP) as a recovery mechanism for Ethernet within a substation. Test will include performance as well as interoperability.

Test Participants:

Hirschmann

RuggedCom

Siemens

Schweitzer Engineering Laboratories

ZIV


61850 IOP – SV Testing

Publishers Subscribers

Alstom SEL Both

SEL

RTDS


IEC 61850 Client/Server Tests

Purpose: To test Reads, Direct Control, un-buffered reporting, buffered reporting, and COMTRADE file transfer.

Participant Matrix:

One more participant may be joining.


IEC 61850 – GOOSE Testing

Test purpose: Interoperability of DataSet member types.


CIM Testing


61968 – Part 4 & Part 13 Test objectives: To test the exchange of full and incremental network

models that contain sufficient information to allow a DMS to produce a Power Flow. Test will include interoperability of multiple systems including GIS and DMS systems from several vendors.

Test Participants: GE Telvent Siemens EDF EPRI Alstom ABB TIBCO SISCO


Witnesses

OncorSunGardTenetERDF


61968 – Part 3 Test objectives: To test the exchange of an Outage Notification message

between an OMS and other Backoffice Systems. Test will include interoperability of multiple systems including OMS, AMI and MDM systems from several vendors.

Test Participants: GE Telvent Grid-Net Siemens Alstom AEP Consumers Energy TIBCO Oracle


Witnesses

OncorSunGardTenetAEP Consumers Energy


61968 – Part 9 Test objectives: To test the exchange of at least 7 Meter Reading and

Control messages between metering systems and other Backoffice Systems. Test will include interoperability of multiple systems including AMI, MDM, OMS systems from several vendors.

Messages that will be Tested: Meter Readings EndDeviceEvents EndDeviceControls PanDeviceEvents PanDeviceControls PanDeviceAssets MeterAssetConfig CoincidentMeterReadings


61968 – Part 9 Test Participants:

GE Telvent Grid-Net Ecologic Analytics Landis & Gyr AEP Consumers Energy TIBCO Oracle eMeter Elster Aclara Itron UISOL


Witnesses

OncorSunGardTenetAEP Consumers EnergyKemaEDF


Middleware/Integration Tests

Tests will include the use of Web Services and JMS Topics and Queues

Integration patterns will include those found in 61968-1-1 and 61968-1-2

Middleware Vendors include:

TIBCO

IBM WebSphere

Oracle WebLogic

Questions ?