Upload
phamngoc
View
217
Download
1
Embed Size (px)
Citation preview
IDROSERVICE SRLCertified companyISO 9001:2008
SALES OFFICES AND STORAGE:Via Don Tazzoli 1200040 PomeziaTel: 06.9114043706.91606153
Registered office and headquarters:Via delle Conce 100154 ROMA
SR
L
DOMESTIC REVERSE OSMOSIS SYSTEMS
Food grade compliance certificate
Idroservice srl
certifies that:
BRAVO-V2, BRAVO-PUMP, TULIP, TULIP PUMP, SAILBOAT, RO-PAD, DEPURA, AQUA-ULTRA are in compliance with:
Decree 6 April 2004, n.174Regulation affects materials and items that can be used in systems for catchment, treatment and distribution of human consumption waters. (G.U. Of 17/07/04)
PRF-RO product is certified NSF/ANSI-58 by producer Pentair Residential Filtration, LLC Milwaukee U.S.A.
These certificates are valid only if original products and consumption materials (osmosis membranes, cartridges etc.) are utilized and expire if non original components are used.
Products, in the above context, have to be installed appropriately, and have to be maintained according to the operating booklet. Products must be correctly operated and must not be contaminated by substances that are dangerous for one’s health.
Idroservice srl operates according to ISO 9001:2008 quality system certified by EQA (European Quality Assurance). Recording number U3275.
Pomezia, 29 September 2014
Technical DirectorDr. Salvatore Carboni
164 165
DOMESTIC REVERSE OSMOSIS SYSTEMS Direct-drive reverse osmosis
Ro-PAD
The RO plant for domestic use is installed under the sink and under plinth of the kitchen shelf. It does not need storage tank.
Composed of:- pre-filtration sediment cartridge PP5 micron 12”x2”1/2;- pre-filtration with activated carbon coconut cartridges 12”x2”1/2;- N.2 reverse osmosis membranes 150GPD certified NSF;- inlet solenoid valve;- solenoid flushing;- high pressure membrane pump;- flooding probe;- pressure switch;- bracket for discharge of the concentrate- pressure reducer- needle valve regulating permeated / waste- needle valve mixing raw water / permeated- tap chromed steelA microprocessor board controls all the automation system and indicate the time ranges for the replacement of the consumption materials (cartridges and membranes).The system is designed for residential and discontinuous use, considering the average consumption of drinking water to the tap of the sink of kitchen family.
Power supply 24V DC (external supply 230V/24V DC included).
EuroDescription
Direct drive reverse osmosis
Code
RO-PAD* With aqueduct water or similar. Water temperature 18 °C.
N.B.Use with aqueduct water or equivalent and in any case with T.D.S. < 600 mg/l (ppm). Consult the Idroservice office for water with different ranges. The functionality of the plant depends on the maintenance and the periodical substitution of the consumption material.
Code
RO-PAD
Permeate*
(l/h)
60
Concentrate
(l/h)
100
Salt
rejection
90%
Membranes n.
2 x 150 GPD
Work pressure
(bar)
7
Power
230V/50Hz
Dimensions mm
(l - w - h)
435x390x105
Technical features
166 167
DOMESTIC REVERSE OSMOSIS SYSTEMS
Compact domestic reverse osmosis system for under the sink with 5 treatment stages.
Composed of:- pre-filtration sediment cartridge PP5 micron 12”x2”1/2;- pre-filtration with activated carbon coconut cartridges 12”x2”1/2;- n.1 box for reverse osmosis membrane 1812- minimum pressure switch;- maximum pressure switch;- bracket for discharge of the concentrate;- shut off valve 4-way (only model without booster pump)- inlet solenoid valve (only model with booster pump)- fittings with speed-fit in technopolymer certified NSF;- flow restrictor;- non-return valve stainless on the permeate;- installation kit
The model TULIP-BOOSTER is equipped with booster pump, to increment the pressure in application where the pressure of the incoming water is <3 bar and a inlet electro valve.
Technical characteristics:
Minimum pressure: > 3 bar (for systems without Booster)Operative maximum pressure: 6 barWater temperature: from 2 to 35 C°Dimensions: max 32,3 (l) x 19,8 (p) x 40,2 (h) cm
Compact reverse osmosis with storage tank
Tulip and Tulip pump
EuroDescription
5 stages compact reverse osmosis 5 stages compact reverse osmosis with booster pump
Code
TULIPTULIP-PUMP
N.B.Use with aqueduct water or equivalent and in any case with T.D.S. < 600 mg/l (ppm). Consult the Idroservice office for water with different ranges. The functionality of the plant depends on the maintenance and the periodical substitution of the consumption material.
Prices from €
Prices from €
WATER INLETS see page 186
Prices from € 29,44
MEMBRANE see page 178/179
Prices from €
DIGITAL INSTRUMENTS see page 184/185
STERILIZER UV RAYS see page 10
ATTENTION:The Tulip systems are provided without any components, in order to personalise the product according to your needs. These components are ordered a part (see below).
Prices from €
TAPS see page 180/181/182
Prices from €
TANKS see page 183
168 169
DOMESTIC REVERSE OSMOSIS SYSTEMS Compact reverse osmosis with storage tank
This is the most classic domestic reverse osmosis systems to be installed under the sink with 5 treatment stages.
Composed of:- pre-filtration n.1 box from 10” transparent and sediment cartridge in polypropylene 5 micron;- pre-filtration n.1 box from 10” white and activated carbon coconut cartridges;- n.1 box for reverse osmosis membrane 1812;- post-filtration n.1 activated carbon in line coconut cartridges 10x2”- minimum pressure switch;- maximum pressure switch;- bracket for discharge of the concentrate;- shut off valve 4-way - inlet solenoid valve (only model with booster pump)- fittings with speed-fit in technopolymer certified NSF;- flow restrictor;- non-return valve stainless on the permeate;- installation kit
The model BRAVO-PUMP is equipped with booster pump, 50 GPD to increment the pressure in application where the pressure of the incoming water is <3 bar .
Bravo and Bravo pump
EuroDescription
5 stages reverse osmosis 5 stages reverse osmosis with booster pump
Code
BRAVO-V2BRAVO-PUMP
N.B.Use with aqueduct water or equivalent and in any case with T.D.S. < 600 mg/l (ppm). Consult the Idroservice office for water with different ranges. The functionality of the plant depends on the maintenance and the periodical substitution of the consumption material.
Technical characteristics:
Minimum pressure: > 3 bar (for systems without Booster)Operative maximum pressure: 6 barWater temperature: from 2 to 35 C°Dimensions: BRAVO-V2 40,0 (l) X 15,0 (p) X 40,0 (h) cm BRAVO-PUMP 36,5 (l) X 19,0 (p) X 45,5 (h) cm
BRAVO-PUMP
BRAVO-V2
Prices from €
Prices from €
WATER INLETS see page 186
Prices from €
MEMBRANE see page 178/179
Prices from €
DIGITAL INSTRUMENTS see page 184/185
STERILIZER UV RAYS see page 10
ATTENTION:The Bravo systems are provided without any components, in order to personalise the product according to your needs. These components are ordered a part (see below).
Prices from €
TAPS see page 180/181/182
Prices from €
TANKS see page 183
170 171
DOMESTIC REVERSE OSMOSIS SYSTEMS Compact reverse osmosis with internal storage tank
Compact domestic reverse osmosis system for under the sink with 5 treatment stages, booster pump and storage tank from 7 l inside the skid. Ideal for installation under the sink.
Composed of:- pre-filtration sediment cartridge PP5 micron 12”x2”1/2;- pre-filtration with activated carbon coconut cartridges 12”x2”1/2;- pre-filtration with activated carbon coconut cartridges 10x2”;- n.1 box for reverse osmosis membrane 1812;- post-filtration n.1 activated carbon in line coconut cartridges 10x2”;- minimum pressure switch;- maximum pressure switch;- bracket for discharge of the concentrate;- inlet solenoid valve;- fittings with speed-fit in technopolymer certified NSF;- flow restrictor;- non-return valve stainless on the permeate;- installation kit.
The model SAILBOAT-BOOSTER is equipped with booster pump, 50 GPD to increment the operative membrane pressure and to make faster the filling of the storage tank.
Technical characteristics:
Minimum pressure: > 3 bar (for systems without Booster)Operative maximum pressure: 6 barWater temperature: from 2 to 35 C°Dimensions: 24,2 (l) x 44,0 (p) x 41,5 (h) cm
Sailboat
EuroDescription
5 stages compact RO with booster pump and storage tank
Code
SAILBOAT-PUMP
N.B.Use with aqueduct water or equivalent and in any case with T.D.S. < 600 mg/l (ppm). Consult the Idroservice office for water with different ranges. The functionality of the plant depends on the maintenance and the periodical substitution of the consumption material.
Prices from €
Prices from €
WATER INLETS see page 186
Prices from €
MEMBRANE see page 178/179
Prices from €
DIGITAL INSTRUMENTS see page 184/185
STERILIZER UV RAYS see page 10
ATTENTION:The SAILBOAT systems are provided without any components, in order to personalise the product according to your needs. These components are ordered a part (see below).
Prices from €
TAPS see page 180/181/182
172 173
DOMESTIC REVERSE OSMOSIS SYSTEMS Micro-filtration systems
Depura is a 2 stages micro-filtration system. It eliminates sand, rust dust, chlorine, organic substances and pesticide from water.
It is designed with 2 distinct micro-filtration stages composed of:
- n.1 filter cartridge made of polypropylene Melt Blow, with filtration degree of 5 micron;- n.1 filter cartridge made of granular activated carbon from coconut;
It is recommended to install in combination with DEPURA an UV ray plant (ECO-MINISTAR), suitable as third stage of treatment to eliminate any virus, bacteria or pathogenic microorganism.
The DEPURA system is delivered without water inlets and tap to customize the system according to own needs. Water inlet and tap have to be ordered apart (see side page).
Depura
AQUA ULTRA is a micro and ultra filtration system with 4 stages. It is compact and it is suitable for be installed under the sink and under plinth of the kitchen shelf.Remove turbidity, sand, rust flakes, chlorine, organic substances, bad tastes or odours, pesticides and bacteria from water. Thanks to ultra-filtration membrane it removes all particles with dimension over 0,01 micron.
Composed by: - Filter cartridge IN-LINE 12” with sediments 5 micron;- Filter cartridge IN-LINE 12” with activated carbon from coconut;- Ultra-filtration membrane IN LINE;- Filter cartridge IN-LINE 12” for the post-filtration with activated carbon from coconut;- Speed-fit made of technopolymer;- Installation kit;- Water inlets;- Tap made of chrome plated brass.
Technical features
- Max. flow rate: 2,4 l/min.- Min. pressure: > 0,5 bar- Max work pressure: 4 bar- Water temperature: 2 – 35°C- Dimensions: 34,0 (l) x 9,5 (d) x 43,5 (h) cm
Aqua-Ultra
EuroDescription
2 stages ultra-filtration system
Code
AQUA-ULTRA
EuroDescription
2 stages micro-filtration system
Code
DEPURA
N.B.Use with aqueduct water or equivalent and in any case with T.D.S. < 600 mg/l (ppm). Consult the Idroservice office for water with different ranges. The functionality of the plant depends on the maintenance and the periodical substitution of the consumption material.
N.B.Use with aqueduct water or equivalent. Consult the Idroservice office for water with different ranges. The functionality of the plant depends on the maintenance and the periodical substitution of the consumption material.
OUT
IN
Prices from €
Prices from €
WATER INLETS see page 186
Prices from €
DIGITAL INSTRUMENTS see page 184/185
STERILIZER UV RAYS see page 10
ATTENTION:The SAILBOAT systems are provided without any components, in order to personalise the product according to your needs. These components are ordered a part (see below).
Prices from €
TAPS see page 180/181/182
174 175
DOMESTIC REVERSE OSMOSIS SYSTEMS Direct-drive osmosis plants
The new reverse osmosis unit PRF-RO is characterized by the production of up to 170 l/h of osmotic water, allowing the direct withdrawal by the user without the need for storage tank.
- to put into operation, pressure > 2,8 bar is sufficient;- compact design, fits under any sink; - certificate NSF/ANSI58;- high recovery rate (up to 33%);- optional booster pump when water pressure <2,8 bar. PRF-RO is also designed to meet the needs of the commercial market such as restaurants, pubs, water coolers, ice machines, aquariums, etc. It is not recommended for industrial or medical facilities or to be used in extreme conditions.
It consists of:- n.1 activated carbon cartridge as pre-filter;- n.2 Reverse osmosis membranes;- n.1 activated carbon cartridge as post filter;- n.1 tap + set of pipes and fittings for complete installation.
The PRF-RO is designed to run on potable water, in case of different water quality contact the Idroservice’s technical department, in order to establish an adequate pre-treatment and to prevent premature fouling of the membranes.
Prf-RoInox Top
Aqua-Ro
Reverse osmosis system for fish tanks and water where a high degree of purity is needed.
AQUA RO produces up to 200 l of water a day* and is composed of:
- IN LINE sediment pre-filter to remove impurities above 5 microns;- IN LINE activated carbon pre-filter to remove chlorine and organic substances;- Osmotic membrane 75 GPD to remove 90-95% of fine minerals in the water.
* Test ConditionsTDS 500 ppm inlet water, pressure 5 bar.
EuroDescription
Counter-top with inox bowl for 10” cartridges
Code
INOX-TOP
N.B. Delivered without cartridges.
EuroDescription
3 stages osmosis system for fish tanks
Code
AQUA-RO
EuroDescription
Direct-drive osmosis system PRF-RO membraneCarbon prefilterCarbon postfilter
Code
PRF-ROME-4000569ME-3038333ME-255526-09
Dimensions (mm) PRF-RO
Operative conditions Min MaxInlet water pressure
Temperature
TDS IN
Hardness IN
Chlorine IN
Iron IN
Manganese IN
2,8 bar
5°C
50 mg/l
-
-
-
-
5,5 bar
38°C
2000 mg/l
20°f
1,0 mg/l
0,1 mg/l
0.05 mg/l
* See table
TECHNICAL DATA
Model Permeate*(l/h)
Recovery (%)
Salt rejection (%)
Feed Pressure (bar)
Dimensions (mm)l x w x h
PRF-RO 58 - 170 25 - 33 90 - 93 2,7 - 5,5 509x242x268
5,5 4,8 4,1 3,4 2,8
27 °C21 °C16 °C10 °C
1451159388
122998378
106857265
84665652
66554338
* data based on the following test conditions: TDS 750 ppm (NaCI), pressure and temperature as above
Pressure (bar)
Tem
pera
ture
flow rate l/h
Table flow rate (l/h) in function of pressure and temperature of the feed water*
N.B.The water entering the system should be aqueduct water or similar.
176 177
DOMESTIC REVERSE OSMOSIS SYSTEMS Direct-drive osmosis plants
MOD-PRO reverse osmosis
The recovery percentage is between 25 and 40% depending on salinity (TDS), specific scaling salts and pre-treatment installed. For hard waters (>20°f) or with high values of salinity (TDS> 1000) it is recommended to contact the Idoservice technical office.
MOD-PRO is a reverse osmosis plant intended for residential/commercial users (houses/flats, bar/dining halls/ restaurants).
It is a simple and economical solution to problems connected with potable or well waters that need to be treated with reverse osmosis.
The average rejection of permeate is 90-95, afterwards suitable in residential/potable cases.
It is not necessary any power supply, the water is treated thanks to the network pressure ( it should be between 2,8 and 5,5 bar).
The MOD-PRO plant are composed of:- 4 or 6 osmotic membranes;- Pressure gauge for inlet pressure meter;- Needle valve for the concentrate;- John Guest fittings 1/2”;- n.1 valve non-return valve for the permeate;
The MOD-PRO produces water into a storage tank (not included ) afterwards is suggested:
- For installations with network pressure > 2,8 bar, using a solenoid valve ½” for the inlet, an electric float for the permeate storage tank and a controller;
Or
- For installations with network pressure < 2,8 bar or with raw water storage tank, using a solenoid valve ½” for the inlet, a booster pump, an electric float for the permeate storage tank and a controller;
The permeate flow rate depends on raw water salinity, pressure and temperature.
MOD-PRO reverse osmosis
MOD PRO 4
MOD PRO 6
5,5 4,8 4,1 3,4 2,8
27 °C21 °C16 °C10 °C
210190170150
190170150140
160150130110
13012010090
1201008060
NB: data based on water with TDS 1000 mg/l
Pressure (bar)
Tem
pera
ture
Table flow rate (l/h) in function of pressure and temperature of the feed water MOD-PRO-4
flow rate l/h
5,5 4,8 4,1 3,4 2,8
26 °C21 °C16 °C10 °C
320290260230
280260230210
240220190170
200180150130
18015012090
NB: data based on water with TDS 1000 mg/l
Pressure (bar)
Tem
pera
ture
Table flow rate (l/h) in function of pressure and temperature of the feed water MOD-PRO-6
flow rate l/h
DIMENSIONS
EuroDescription
Direct-drive 4 membranes osmosis plantDirect-drive 6 membranes osmosis plantBooster pump 230VElectrical float with wire 5 mFloat counterweightJohn Guest elbow 1/2”John Guest T 1/2”Straight threaded terminal 1/2” for 1/2” tube
Code
MOD-PRO-4MOD-PRO-6LOW-2HMGAL500144CON001PI0316SPI0216SPI011604S
Technical prescriptions
Inlet pressure:
Raw water T.D.S.:
S.D.I.:
Hardness:
Chlorine:
Iron:
Manganese:
Recovery:
2,8 bar min - 5,5 bar max
2000 mg/l max
< 3
<20°f (for higher hardness values
use antiscalants or softener)
0,1 mg/l max
0,1 mg/l max
0,05 mg/l max
starting from 25% (recommended)
up to 40%. Raw water has to be
microbiologically pure
Model
MOD-PRO-4MOD-PRO-6
A
280280
B
280420
C
620620
IN/OUT
1/2”1/2”
A
B
C
178 179
DOMESTIC REVERSE OSMOSIS SYSTEMS
Filmtec Dow membranes
Membranes made in USA with NSF/ANSI standard 58 certificate*. Dry packaged.
Membranes made of Toray/dry textile, certified NSF/ANSI standard 58. It is available in models 1812 with 75 GPD, 100 GPD and 150 GPD and also in the greater version 3012 with 300 GPD.
Membranes made in USA (California) built with Filmtec textile by one of the most important membranes producer all over the world. Certificate* NSF/ANSI standard 58 and D.M. 174/04 for Italian market.
Ultra-filtration is able to hold particle with diameter between 0,001 and 0,05 μm. It remove impurity with a corpuscular characteristic such as suspended matter, colloids, microorganisms and bacteria. It is also used: for reverse osmosis pre-treatment in order to ensure more durability or as post-treatment in order to ensure the microbiological quality of the water. The ultra-filtration membrane UF10Q does not produce concentrate (100% permeate), and it is easily mountable on pre-existing plants thanks to IN/OUT 1/4” connections.
Work pressure: min 0,3 bar, max 4 bar.Filtration degree: from 0,005 to 0,1 microns.
Hidrotek membranes
Applied Membranes membranes Ultra-filtration in line membranes
Membranes for domestic reverse osmosis system
Operating limitsWork pressure Inlet flow rate Raw water SDIChlorine Recovery percentageWater temperature Inlet water pH
21 bar max7,6 l/min. max5 max< 0,1 ppm25% max45°C max2 - 11
Operating limits
Work pressure Inlet flow rate Raw water SDIChlorine Recovery percentageWater temperature
Inlet water pH
21 bar max7,6 l/min. max5 max< 0,1 ppm25% max45°C max2 - 11
The technical specifications are calculated on the following conditions: pressure 4 bar, water temperature 25°C, NaCl 250 ppm, pH 7,5 , recovery 15%.N.B. The 300 GPD membranes need of dedicated membrane 3012 housing.
The technical specifications are calculated on the following conditions: pressure 4 bar, water temperature 25°C, NaCl 250 ppm, pH 7,5 , recovery 15%.
Note: Membranes with 150 GPD are suitable for almost every membrane holder 1812; in the event that the vessel is too great you should try to use strip to fit together the vessel and the membrane, otherwise you obtain high level of T.D.S. in the permeate.
* Membranes M-T1812A-150G-ID have not the NSF certificate.
EuroDescription
Hidrotek membrane 75 GPDHidrotek membrane 100 GPD Hidrotek membrane 150 GPDHidrotek membrane 300 GPD
Code
HIDROTEK-75HIDROTEK-100HIDROTEK-150HIDROTEK-300
The hidroTek membranes are cerTified nsf/ansi sTandard 058
(reverse osmosis TreaTmenT planTs for poTable waTers)
EuroDescription
Membranes Applied membrane 75 GPDMembranes Applied membrane 100 GPD Membranes Applied membrane 150 GPD
Code
M-T1812A75-IDM-T1812A100-IDM-T1812A150-ID
EuroDescription
Filmtec membrane 75 GPDFilmtec membrane 100 GPD
Code
TW30-1812-75TW30-1812-100
EuroDescription
Ultra-filtration membrane with 1/4” stem connections
Code
UF-10Q
Model Hidrotek 75G Hidrotek 100G Hidrotek 150G Hidrotek 300GPermeate (l/g) Salt rejection (%)Membrane material Dimensions (mm) (LxWxDxE)
28097,50%
Polyamide TFC298x250x45x17
38096%
Polyamide TFC298x250x45x17
57096%
Polyamide TFC298x250x50x17
114096%
Polyamide TFC298x250x76x17
TECHNICAL DATA
Model M-T1812A75-ID M-T1812A100-ID M-T1812A150-IDPermeate (l/g) Salt rejection (%)Membrane material Dimensions (mm) (LxWxDxE)
28596-98%
Polyamide TFC298x254x45x17
38096-98%
Polyamide TFC298x254x45x17
56096-98%
Polyamide TFC298x250x50x17
TECHNICAL DATA
Model TW30-1812-75 TW30-1812-100Permeate (l/g) Salt rejection (%)Membrane material Dimensions (mm) (LxWxDxE)
28899%
Polyamide TFC298x239x45x17
38090%
Polyamide TFC298x254x45x17
TECHNICAL DATA
Model UF10QFlow rate with aqueduct water (l/m)Flow rate with osmosis water (l/m)Membrane typeIN/OUT connections Dimensions (mm) (LxWxD)
2,43,6
Dead end hollow fibre 1/4”(stem M)320x280x66
TECHNICAL DATA
Work pressure Inlet flow rate Raw water SDIChlorine Recovery percentageWater temperature Inlet water pH
8,6 bar max7,6 l/min. max5 max< 0,1 ppm25% max45°C max2 - 11
Operating limits
180 181
DOMESTIC REVERSE OSMOSIS SYSTEMS Taps
Revers osmosis certified taps
One-way tap with straight lever.Finishing : Silver opaque satin finished Tube connection: 1/4”External material: Brass/aluminum Are not present heavy materials.Water contact parts: plastic (Polyamide and PTFE).NSF certificate for potable water.
EuroDescription
One-way chromium-plated tap w/ straight lever
Code
H0010-833
One-way tap with straight lever.Finishing : Chromium-plated Tube connection: 1/4”External material: Brass/aluminum Are not present heavy materials.Water contact parts: plastic (Polyamide and PTFE).NSF certificate for potable water.
The tap is supplied with a interior made of NSF certified plastic produced by General Electric. Osmosis water will never touch metallic surfaces afterwards without any possibility of contamination.
Reliability ceramic plate valve produced with food grade materials from General Electric (polyamide PA45, Noryl, o’rings made of EPDM). The production process ensures a tap without losses and perfectly functioning for several years.
One-way tap with straight lever.Finishing : Chromium-plated polishedTube connection: 1/4”External material: Brass/aluminum Are not present heavy materials.Water contact parts: plastic (Polyamide and PTFE).NSF certificate for potable water.
EuroDescription
One-way nickel-plated smoked tap w/ “drop” lever
Code
H0011-7033NP
One-way tap with “drop” lever.Finishing : Opaque smoked nickel-plated Tube connection: 1/4”External material: Brass/aluminum Are not present heavy materials.Water contact parts: plastic (Polyamide and PTFE).NSF certificate for potable water.
EuroDescription
One-way antiques copper tap w/ “drop” lever
Code
H0014-AW9053
EuroDescription
One-way chromium-plated polished tap
Code
H0013-8883
EuroDescription
One-way silver opaque satin tap
Code
H0012-ST883
One-way tap with “drop” lever.Finishing : Antiques copper. Appropriate in country style kitchens Tube connection: 1/4”External material: Brass/aluminum Are not present heavy materials.Water contact parts: plastic (Polyamide and PTFE).NSF certificate for potable water.
Strong high quality tap, made to endure and work with high quality standards.
182 183
DOMESTIC REVERSE OSMOSIS SYSTEMS Storage tanks
Chromium-plated taps
EuroDescription
One-way chromium-plated w/3 lobes knob tap
Code
H0009-02C
EuroDescription
Two-way chromium-plated w/2 straight levers tap
Code
H0013-07-2V
One-way tap with 3 lobes knob Finishing : Chromium-plated polishedTube connection: 1/4”External material: Brass/aluminum
EuroDescription
Three-way chromium-plated w/3 straight levers tap
Code
H0014-408-3V
Two-way tap (aqueduct water/osmosis water) with straight levers Finishing : Chromium-plated polishedTube connection (2): 1/4”External material: Brass/aluminum
Three-way tap (aqueduct hot water/cold/osmosis water) with straight levers Finishing : Chromium-plated polishedTube connections: 3/8” F x2 + 8 mm speed-fit x1External material: Brass/aluminum
The closed pressure tanks selected from Idroservice permit to supply osmosis clean water without microorganism (that can be present if open tanks are used).
The internal membranes and components in contact with water are certified to work with drinking water. Before the installation, in order to avoid any possibility of bad odours, the membranes are treated with a sanitization process.
Storage tanks for osmosis plants
Model Volume (l) External material Connection Height (mm) Ø (mm)TP-120TP-122PPRO-4000TP-1070
8121560
Painted steel PlasticPlastic
Painted steel
1/4”1/4”1/4”
1”
307364400575
201240285390
TECHNICAL DATA
EuroDescription
Storage tank RO 2,2G – 8 l metal Storage tank RO 3,2G – 12 l plastic Storage tank RO 4G – 15 l plastic Storage tank RO 14G – 60 l metal
Code
TP-120TP-122PPRO-4000TP-1070
PRO-4000TP-122TP-120 TP-1070
all sTorage Tanks are nsf cerTificaTe for drinkable waTer usage and ce (in
line wiTh ped).
max work pressure: 6,8 bar, all sTorage Tanks are pre-pressured aT 0,4 bar.
1. Hydraulic fitting2. Diaphragm made of butyl food grade certified 3. Plastic anti-corrosion material shell or metal painted shell with polyurethane bi-component and epoxy bottom 4. polypropylene internal seal5. Anti-dust valve
184 185
DOMESTIC REVERSE OSMOSIS SYSTEMS Electrical instruments
The 8100Tmeter allows to:- monitor the residual time in litres before the maintenance of the equipment (programmable from 500 to 99500 litres, with a 500 litres space out);- monitor the residual time in days before the maintenance (programmable from 30 to 720 days, with a 30 days space out);- emit an acoustic alarm 100 litres or 7 days before the programmed time and another signal at the end of the time programmed.
Instrument for water losses control capables to:
- Notice wet surface;- Stop water supply using a 1/2” solenoid valve (included);- Monitor the residual time before maintenance (every 12 months not modifiable);- Emit an acoustic alarm.
The 8000Tmeter allows to:- monitor the residual time in litres before the maintenance of the equipment (programmable from 500 to 99500 litres, with a 500 litres space out);- monitor the residual time in days before the maintenance (programmable from 30 to 720 days, with a 30 days space out);- emit an acoustic alarm 100 litres or 7 days before the programmed time and another signal at the end of the time programmed.
Instrument for TDS meter for little reverse osmosis plant:
- TDS reading range: 0 – 999 ppm (precision: +/-2%);- Acoustic alarm settable from 5 to 200 ppm of TDS;- Probe and installation TEE for 1/4” tube;- Power supply with a 9V battery;- Probe wire length 45 cm;- Dimensions lxhxw mm 70x55x33
The 8300Tmeter allows to:- monitor the residual time in litres before the maintenance of the equipment (programmable up to 99999 litres, with a 1 litres space out);- instant flow rate meter in l/m;- emit an acoustic alarm 100 litres or 7 days before the programmed time and another signal at the end of the time programmed.
Portable TDS meter:
TDS reading range: from 0 to 999 ppm, resolution: 1 ppm;
Auto-correct measurement with temperature.Precision: +/-2%Battery: 1x3V (included) Dimensions 15x3x1,5 (cm)
Residual time/volume meter 8100T instant flow rate from 0,8 to 8 l/min AS-420BR anti-flooding alarm and residual filter timer with shut off valve made of chromium-plated brass
Residual time/volume meter 8000T instant flow rate from 1,5 to 15 l/min RT-790 in line TDS meter
Residual time volumetric meter 8300T instant flow rate from 0,05 to 1 l/min Pen TDS meter 0 – 999 ppm
EuroDescription
Residual time/volume meter, flow rate 0,8 – 8 l/min, w/turbine 1/4”
Code
H0015-8100T
EuroDescription
Anti-flooding alarm and residual filter timer w/shut off valve
Code
H0017-AS420BR
EuroDescription
Residual time/volume meter, flow rate 1,5 – 14 l/min, w/turbine 3/8”
Code
H0016A-8000T
EuroDescription
Digital in line TDS meter w/alarm 5 – 250 ppm
Code
H0018-RT-790
EuroDescription
Residual volume meter, flow rate 0,05 – 1 l/min, w/turbine 1/4”
Code
H0016B-8300T
EuroDescription
Digital pen TDS meter
Code
H0019-TDS03
Applications: thanks to the high sensibility of the turbine it is suitable for Point of Use applications (micro-filtration plants, domestic reverse osmosis plants, direct-drive reverse osmosis plants), water or drink dispenser.
Applications: Point of Use applications (micro-filtration plants, domestic reverse osmosis plants, direct-drive reverse osmosis plants), water or drink dispenser.
Applications: thanks to the high sensibility of the turbine it is suitable for Point of Use applications (micro-filtration plants, domestic reverse osmosis plants, direct-drive reverse osmosis plants), water or drink dispenser.
Applications: Little filtration, softeners, osmosis plants, refrigeration and beverage plants.Applications: Domestic reverse osmosis plants.
Technical features: - Sensor sensibility: 0,8 – 8 l/min;- Power supply with 2 AA battery;- 1/4” M connections;- Turbine sensor made of technopolymer and inox 304;- Horizontal turbine installation;- Dimensions lxhxw mm 70x55x33;
Technical features:- Shut off valve made of chromium-plated brass with 1/2” M/F connections;- Power supply with 9V battery;- Max work pressure 6 bar;- Installation on the floor of the under-sink or into the RO plant vessel - Dimensions lxhxw mm 70x55x33
Technical features:- Sensor sensibility: 0,05 – 1 l/min;- Power supply with 2 AA battery;- 1/4” M connections;- Turbine sensor made of technopolymer and inox 304;- Horizontal turbine installation;- Dimensions lxhxw mm 70x55x33
Technical features:- Sensor sensibility: 1,5 – 15 l/min;- Power supply with 2 AA battery;- 3/8” F connections;- Turbine sensor made of technopolymer and inox 304;- Internal turbine installation;
186 187
DOMESTIC REVERSE OSMOSIS SYSTEMS Components and accessories
Self-piercing water inlets
Self-piercing water inlets with bracket, including speed-fit for 1/4” tube.
EuroDescription
Self-piercing water inlet w/valve for 1/4” tube
Code
H0006-BV0604-Q
EuroDescription
Single chromium-plated switch 1/4”Double chromium-plated switch 1/4”
Code
H0007-BV4104H0008-BV4204
Single or double, made of chromium-plated brass, with push-on connections for 1/4” tubes.The single switch permits to deviate water to the treatment plant. The double switch includes the return of the treated water and its supply.
Water inlets
Switches
Water sleeve inlets made of chromium-plated brass with 1/4” hole for valve. Diameters available with threaded 3/8” 1/2” 3/4”.
EuroDescription
Sleeve 3/8” w/hole 1/4”, 25mm length, threaded Sleeve 1/2” w/hole 1/4”, 45mm length, threaded Sleeve 3/4” w/hole 1/4”, threaded
Code
H0001-BV3066-1H0002-BV3077H0003-BV3288
Water inlet valves
Valve with threaded connections 1/4” M for water inlets.Available for 1/4” tube (with speed-fit) and 3/8” (with push-on connection).
EuroDescription
Valve 1/4” M, for 1/4” tubes, speed-fit connectionValve 1/4” M, for 3/8” tubes, push-on connection
Code
H0004-BV2044-QH0005-BV2046
Pressure regulator with 1/4” M/F connections.
Max inlet pressure: 8 bar Exit pressure: 2,5 bar
Plastic pressure regulator
EuroDescription
Plastic pressure regulator
Code
H0020-PRV-2
Permeate/raw water mixing kit. Permit to obtain water with the required conductivity.It includes 2 TEE, 1 mixing valve, a non-return valve and 1/4” tube.
Mixing kit
EuroDescription
Mixing kit 1/4” w/speed-fit connections
Code
H0023-BR35
Needle valve capable to monitoring precisely flow rates of permeate and concentrate in little reverse osmosis plants. 1/4” push-on connections. Max pressure 8 bar.
Needle valve made of chromium-plated brass 1/4”
EuroDescription
Needle valve made of chromium-plated brass 1/4”
Code
H0024-MV02M
Direct-action pressure regulator with piston. Perfect for little/domestic applications and drink dispensers. Adjustable exit pressure. Model with pressure gauge connection.
EuroDescription
Metal pressure regulator w/3/8” connection Metal pressure regulator w/1/2” connection
Code
H0021-105BGH0022-106BG
Brass pressure regulator Technical data:
Max pressure: 15 bar Adjustable range: 1- 4bar Pre-setting: 3 barPressure gauge connection: 1/4”
188 189
DOMESTIC REVERSE OSMOSIS SYSTEMS Components and accessories
Pressure vessel for membrane 1812 with 36 GPD, 50 GPD, 75 GPD, 100 GPD and 150 GPD.Built with double o’ring, threaded 1/4” NPT connections. Maximum work pressure 12 bar.
Vessel for membrane 1812
Booster pump 50 GPD for reverse osmosis plants. Power supply 24VDC, consumption 0,31 A.Flow rate 53 l/h with 3,5 bar (inlet pressure 0,5 bar).
Booster pump 50 GPD
Direct-drive booster pump for reverse osmosis plants. Flow rate 160 l/h and pressure 7 bar. Suitable for non-continuous applications. Power supply 24VDC, consumption 3,2A. Connections 3/8”.
Booster pump 400 GPD
Pressure vessel for membrane 3012 with 200 GPD and 300 GPD.Built with double o’ring, threaded 3/8” IN connection and 1/4” OUT connections. Maximum work pressure 12 bar.
Vessel for membrane 3012
EuroDescription
Booster pump 50 GPD – P 6005Transformer for booster pump 230V/24 VDC, 1AHead spare part for booster pump P6005
Code
H0029-P6005-2H0030-P6122CE-3H0031-V6000-1
EuroDescription
Membrane vessel 1812, double o’ring
Code
H0027-10B-1812
EuroDescription
Membrane vessel 3012, double o’ring
Code
H0028-10BB-3012
EuroDescription
Booster pump 400G – 160 l/h GMB 78 24 32Transformer for booster pump 230V/24 VDC, 2AHead spare part for booster pump GMB 78 24 32Diaphragm spare part for booster pump GMB 78 24 32
Code
H0033-GMB782432H0033-ALH0033-HEH0033-DF
Low pressure switch 230V/5A with 2 contacts for domestic reverse osmosis plants.Speed-fit 1/4” connection.
Low pressure switch
Shut off valve with 4 ways and speed-fit 1/4” connections.
Shut off valve
Bracket for concentrate with speed-fit 1/4” connection.
Concentrate bracket
High pressure switch adjustable (1,4 – 2,8 bar) 230V/5A with 2 contacts for domestic reverse osmosis plants. Speed-fit 1/4” connection.
High pressure switch
EuroDescription
Low pressure switch w/speed-fit 1/4” connection
Code
H0034-CV6231B-Q
EuroDescription
High pressure switch w/speed-fit 1/4” connection
Code
H0035-CV6201B-Q
EuroDescription
Shut off valve w/speed-fit 1/4” connections
Code
H0037-CV0201W-Q
EuroDescription
Concentrate bracket w/speed-fit 1/4” connection
Code
H0038-CU114B-Q
190 191
DOMESTIC REVERSE OSMOSIS SYSTEMS Speed-fit
Certified speed-fit fittings made of technopolymer
EuroThread
1/4” F
Pipe
1/4”
Description
Ball valve for storage tank
Code
H0055-CV1144-Q EuroThread
1/4”
Pipe
1/4”
Description
Speed-fit/F straight fitting pipe
Code
H0064-FA0404
EuroPipe
1/4”3/8”
Pipe
1/4”3/8”
Description
Ball valve Ball valve
Code
H0053-CV1344-QH0054-CV1366Q
EuroPipe
1/4”
Pipe
1/4”
Description
Non-return in line valve
Code
H0056-CV3344-Q
EuroThread
1/8” M1/8” M
Pipe
1/4”1/4”
Description
Non-return elbow valve Non-return straight valve
Code
H0057-CV3142-QH0058-CV3242-Q
EuroThread
1/8” 1/4” 1/4”3/8”1/2”
Pipe
1/4”1/4”3/8”3/8”3/8”
Description
Speed-fit/M straight fitting pipe Speed-fit/M straight fitting pipe Speed-fit/M straight fitting pipe Speed-fit/M straight fitting pipe Speed-fit/M straight fitting pipe
Code
H0059-MC0402H0060-MC0404H0061-MC0604H0062-MC0606H0063-MC0607
EuroPipe
1/4”3/8”
Pipe
1/4”3/8”
Description
Speed-fit elbow fitting pipeSpeed-fit elbow fitting pipe
Code
H0065-UE0404H0066-UE0606
Certified speed-fit fittings made of technopolymer
EuroPipe
1/4”1/4”3/8”
Pipe
3/8”1/4”3/8”
Description
Pipe reduction fittingPipe fittingPipe fitting
Code
H0067-UC0604H0082-UC0404H0083-UC0606
EuroThread
1/8”1/4”3/8”
Pipe
1/4”1/4”1/4”
Description
M threaded elbow pipe M threaded elbow pipe M threaded elbow pipe
Code
H0069-ME0402H0070-ME0404H0071-ME0406
EuroPipe
1/4” x 1/4” x 1/4”3/8” x 3/8” x 3/8” 3/8” x 1/4” x 3/8”
Description
Tee fitting pipe Tee fitting pipeTee reduction pipe
Code
H0072-UT0404H0073-UT0606H0068-UT0406
EuroStem
1/4”1/4”
Pipe
1/4”1/4” x 1/4”
Description
Elbow with stemTee with stem
Code
H0074-SE0404H0075-SRT0404
EuroPipe
1/4”3/8”
Pipe
1/4”3/8”
Description
Bulk head union Bulk head union
Code
H0076-BU0404H0077-BU0606
EuroThread
1/4”
Thread
1/4”
Description
Nipple
Code
H0078-HN0404
EuroPipe
1/4”3/8”
Description
White 1/4” tube, 300 m White 1/4” tube, 150 m
Code
H0079-E2004WH0080-E2006W
EuroPipe
1/4”3/8”
Pipe
1/4”3/8”
Description
Needle valve Needle valve
Code
H0025-404H0026-606
MAX work pressure 8 bar and temperature 16°C.
192
DOMESTIC REVERSE OSMOSIS SYSTEMS
193
Speed-fit John Guest
QUICK FITTINGS FOR METRIC SIZE
STRAIGHT M THREADED ADAPTOR BSP
REDUCER WITH STEM
REDUCING STRAIGHTCONNECTOR
REDUCING ELBOW CONNECTOR
LLDPE TUBING (Linear low density polyethylene)
EQUAL TEE EQUAL ELBOW
EuroDescription 4MM X 1/8 BSP 4MM X 1/4 BSP 5MM X 1/8 BSP 5MM X 1/4 BSP 6MM X 1/8 BSP 6MM X 1/4 BSP 8MM X 1/8 BSP 8MM X 1/4 BSP 8MM X 3/8 BSP
10MM X 1/4 BSP 10MM X 3/8 BSP 10MM X 1/2 BSP 12MM X 3/8 BSP 12MM X 1/2 BSP
Code PM010411EPM010412EPM010511EPM010512EPM010611EPM010612EPM010811EPM010812EPM010813EPM011012EPM011013EPM011014EPM011213EPM011214E
EuroDescription 5MM - 4MM 6MM - 4MM 6MM - 5MM 8MM - 4MM 8MM - 5MM 8MM - 6MM
10MM - 6MM 10MM - 8MM 12MM - 8MM
12MM - 10MM 5MM - 4MM P - G
CodePM060504EPM060604EPM060605EPM060804EPM060805EPM060806EPM061006EPM061008EPM061208EPM061210EPM130405E
EuroDescription 6MM - 4MM 8MM - 4MM8MM - 6MM
10MM - 4MM10MM - 6MM10MM - 8MM 12MM - 8MM
12MM - 10MM
CodePM200604EPM200804EPM200806EPM201004EPM201006EPM201008EPM201208EPM201210E
EuroDescription 6MM - 4MM 8MM - 4MM 8MM - 6MM
10MM - 4MM 10MM - 6MM10MM - 8MM 12MM - 8MM
12MM - 10MM
CodePM210604EPM210804EPM210806EPM211004EPM211006EPM211008EPM211208EPM211210E
EuroDescription 4 mm X 2.5 mm blue tube, coil 100 m6 mm X 4 mm blue tube, coil 100 m8 mm X 6 mm blue tube, coil 100 m
10 mm X 7 mm blue tube, coil 100 m12 mm X 9 mm blue tube, coil 100 m1/4” X 0,17” black tube, coil 500 ft
5/16” X 0,187” black tube, coil 500 ft3/8” X 0,25” black tube, coil 500 ft
1/2” X 0,375” black tube, coil 250 ft
Code PE-04025-0100M-BPE-0604-0100M-BPE-0806-100M-BPE-1007-100M-BPE-1209-100M-BPE-08-BI-0500F-EPE-10-CI-0500F-EPE-12-EI-0500F-EPE-16-GI-0250F-E
STRAIGHT M THREADED ADAPTOR BSPT
EuroDescription 4MM X 1/4 BSPT 5MM X 1/8 BSPT 5MM X 1/4 BSPT 6MM X 1/8 BSPT 6MM X 1/4 BSPT 8MM X 1/8 BSPT 8MM X 1/4 BSPT 8MM X 3/8 BSPT
10MM X 1/4 BSPT 10MM X 3/8 BSPT 10MM X 1/2 BSPT 12MM X 3/8 BSPT 12MM X 1/2 BSPT
Code PM010402EPM010501EPM010502EPM010601EPM010602EPM010801EPM010802EPM010803EPM011002EPM011003EPM011004EPM011203EPM011204E
STRAIGHT F THREADEDADAPTOR BSP
EuroDescription 4MM X 1/8 BSP6MM X 1/8 BSP 6MM X 1/4 BSP 8MM X 1/4 BSP
10MM X 5/8 BSP
Code PM450411EPM450611EPM450612EPM450812EPM451015FE
EuroDescription 4MM 5MM 6MM 8MM
10MM12MM
Code PM0204EPM0205EPM0206EPM0208EPM0210EPM0212E
EuroDescription 4MM5MM6MM8MM
10MM 12MM
CodicePM0304EPM0305EPM0306EPM0308EPM0310EPM0312E
EuroDescription 4MM X 1/8 BSPT 4MM X 1/4 BSPT 5MM X 1/8 BSPT5MM X 1/4 BSPT 6MM X 1/8 BSPT 6MM X 1/4 BSPT 8MM X 1/8 BSPT8MM X 1/4 BSPT 8MM X 3/8 BSPT
10MM X 1/4 BSPT 10MM X 3/8 BSPT 10MM X 1/2 BSPT12MM X 3/8 BSPT 12MM X 1/2 BSPT
Code PM050401EPM050402EPM050501EPM050502EPM050601EPM050602EPM050801EPM050802EPM050803EPM051002EPM051003EPM051004EPM051203EPM051204E
STEM THREADED ADAPTOR BSPT
STRAIGHT M THREADED ADAPTOR NPTF
EuroDescrizione6 mm x 1/4 NPTF
Code PM010622E
EuroDescription 4MM X 1/8 BSP 4MM X 1/4 BSP 5MM X 1/8 BSP 5MM X 1/4 BSP 6MM X 1/8 BSP 6MM X 1/4 BSP 8MM X 1/8 BSP8MM X 1/4 BSP 8MM X 3/8 BSP
10MM X 1/4 BSP 10MM X 3/8 BSP10MM X 1/2 BSP 12MM X 3/8 BSP 12MM X 1/2 BSP
Code PM050411EPM050412EPM050511EPM050512EPM050611EPM050612EPM050811EPM050812EPM050813EPM051012EPM051013EPM051014EPM051213EPM051214E
STEM THREADED ADAPTOR BSP
EQUAL STRAIGHTCONNECTOR
EuroDescription 4MM 5MM6MM 8MM
10MM 12MM
Code PM0404EPM0405EPM0406EPM0408EPM0410EPM0412E
ELBOW WITH STEM
EuroDescription 4MM - 4MM 5MM - 5MM 6MM - 6MM 8MM - 8MM
10MM - 10MM 12MM - 12MM
CodePM220404EPM220505EPM220606EPM220808EPM221010EPM221212E
NON-RETURN VALVE
EuroDescription 6MM
10MM 12MM 1/4”
5/16”3/8”
Code 6SCV10SCV12SCV1/4SCV5/16SCV3/8SCV
EuroDescription 4MM
10MM 15MM
Code PM2304EPM2310EPM2315E
EuroDescription 6MM X 1/8 NPTF 6MM X 1/4” NPTF 6 MM X 3/8 NPTF
Code PM480621EPM480622EPM480623E
TWO-WAY DIVIDER
EuroDescription 4MM 5MM 6MM 8MM
10MM 12MM
Code PM1204EPM1205EPM1206EPM1208EPM1210EPM1212E
BULKHEAD CONNECTOR
Note: The John Guest fittings are sold in packets of 10 pieces and the prices refer to single objects. The BSP thread is cylindrical with o’ring, the BSPT thread is conic.
SET OF KEYS
EuroDescription TUBE CUTTER
KEYS SET
Code TSNIPICLT/2
SPEED-FIT TO SPEED-FIT VALVES
Minimum order 10 pcs
EuroDescription 6MM
10MM 12 MM 1/4”3/8”
1/4” - 1/4 FIL. NPT 3/8” - 3/8 FIL. NPT
A GOMITO 1/4” X 1/4” NPT F. A GOMITO 3/8” X 3/8” NPT F.
Code PPMSV040606WPPMSV041010WPPMSV041212WPPSV040808WPPSV041212WPPSV010822WPPSV011223WPPSV500822WPPSV501222W
EuroDescription 6MM - 4MM COD.8MM - 6MM COD.
10MM - 8MM COD.
Code PM250604EPM250806EPM251008E
TUBE TO HOSE STEM
PLUGS
EuroDescription 4MM PLUG - RED
5/32” PLUG - GREY5MM PLUG - RED6MM PLUG - RED
8MM PLUG - BLACK8MM PLUG - RED
5/16” PLUG - GREY10MM PLUG - RED12MM PLUG - RED
Code PM0804RPM0804SPM0805RPM0806RPM0808EPM0808RPM0808SPM0810RPM0812R
LOCKING CLIP
EuroDescription 4MM CLIP BLOCCA-PINZETTA5MM CLIP BLOCCA-PINZETTA6MM CLIP BLOCCA-PINZETTA8MM CLIP BLOCCA-PINZETTA10MM CLIP BLOCCA-PINZETTA12MM CLIP BLOCCA-PINZETTA
Code PM1804RPM1805RPM1806RPM1808RPM1810RPM1812R
EQUAL ELBOW
194
DOMESTIC REVERSE OSMOSIS SYSTEMS
Flow restrictors
Two ways solenoid valves
Cartridge housing brackets
EuroDescription
Flow restrictor 420 cc, speed-fit 1/4”Flow restrictor 550cc, speed-fit 1/4”Flow restrictor 800 cc, speed-fit 1/4”
Code
H0039-FR5042-QH0040-FR5055-QH0041-FR2280-Q
EuroDescription
S.v. 2 ways 24VDC n.c. w/speed-fit 1/4” (Tulip/Sailboat)S.v. 2 ways 24VDC n.c. w/threaded 1/4” F (RoPAD-IN)S.v. 2 ways 24VDC n.c. w/threaded 1/4” F (RoPAD-fluss.)
Code
H0050-P4204-24BK-1H0051-SVA-827-2H0052-SVA-827-3
EuroDescription
Double bracket for 10” cartridge holder Triple bracket for 10” cartridge holderTriple bracket for 10” cartridge holder and booster pump housing Single bracket for MAXI BLU
Code
H0047-BT1132H0048-BT1133H0049-BT1133PH0081-BT1131
Clips
EuroDescription
Single clip 50 mm = 2”Single clip 63 mm = 2”1/2Single clip 63/50 mm = 2”1/2 x 2”Single clip 63/63 mm = 2”1/2 x 2”1/2Single clip 50/50 mm = 2”x 2”
Code
H0042-CL2000WH0043-CL2500WH0044-CLD2500WH0045-CLD3000WH0046-CLD2000W
H0051-SVA-827-2H0050-P4204-24BK-1